Error on importing cimsap.zip

Hi experts,
I have upgraded my portal to EP 7 SP 14. I am trying to configure DI. When I try to import cimsap.zip, I am getting following errors. CR_Content.zip is successfully imported. Has anybody faced this problem before? Please help.
One more thing is I am able to access CMS,CBS, DTR,SLD webguis. but devinf page is not opening. Any clues?
Regards,
Mehul
Error Message:
Import finished with 73 errors: 906 of 979 objects loaded
Errors:
CIM_ERR_FAILED: CIM qualifier Alias is currently not supported by this implementation
QUALIFIER.DECLARATION Alias
CIM_ERR_FAILED: CIM qualifier BitMap is currently not supported by this implementation
QUALIFIER.DECLARATION BitMap
CIM_ERR_FAILED: CIM qualifier BitValues is currently not supported by this implementation
QUALIFIER.DECLARATION BitValues
CIM_ERR_FAILED: CIM qualifier Composition is currently not supported by this implementation
QUALIFIER.DECLARATION Composition
CIM_ERR_FAILED: CIM qualifier Counter is currently not supported by this implementation
QUALIFIER.DECLARATION Counter
CIM_ERR_FAILED: CIM qualifier Delete is currently not supported by this implementation
QUALIFIER.DECLARATION Delete
CIM_ERR_FAILED: CIM qualifier Deprecated is currently not supported by this implementation
QUALIFIER.DECLARATION Deprecated
CIM_ERR_FAILED: CIM qualifier DN is currently not supported by this implementation
QUALIFIER.DECLARATION DN
CIM_ERR_FAILED: CIM qualifier Expensive is currently not supported by this implementation
QUALIFIER.DECLARATION Expensive
CIM_ERR_FAILED: CIM qualifier Experimental is currently not supported by this implementation
QUALIFIER.DECLARATION Experimental
CIM_ERR_FAILED: CIM qualifier Gauge is currently not supported by this implementation
QUALIFIER.DECLARATION Gauge
CIM_ERR_FAILED: CIM qualifier Ifdeleted is currently not supported by this implementation
QUALIFIER.DECLARATION Ifdeleted
CIM_ERR_FAILED: CIM qualifier In is currently not supported by this implementation
QUALIFIER.DECLARATION In
CIM_ERR_FAILED: CIM qualifier Invisible is currently not supported by this implementation
QUALIFIER.DECLARATION Invisible
CIM_ERR_FAILED: CIM qualifier Large is currently not supported by this implementation
QUALIFIER.DECLARATION Large
CIM_ERR_FAILED: CIM qualifier MaxValue is currently not supported by this implementation
QUALIFIER.DECLARATION MaxValue
CIM_ERR_FAILED: CIM qualifier MinLen is currently not supported by this implementation
QUALIFIER.DECLARATION MinLen
CIM_ERR_FAILED: CIM qualifier MinValue is currently not supported by this implementation
QUALIFIER.DECLARATION MinValue
CIM_ERR_FAILED: CIM qualifier Nonlocal is currently not supported by this implementation
QUALIFIER.DECLARATION Nonlocal
CIM_ERR_FAILED: CIM qualifier NonlocalType is currently not supported by this implementation
QUALIFIER.DECLARATION NonlocalType
CIM_ERR_FAILED: CIM qualifier NullValue is currently not supported by this implementation
QUALIFIER.DECLARATION NullValue
CIM_ERR_FAILED: CIM qualifier Octetstring is currently not supported by this implementation
QUALIFIER.DECLARATION Octetstring
CIM_ERR_FAILED: CIM qualifier Out is currently not supported by this implementation
QUALIFIER.DECLARATION Out
CIM_ERR_FAILED: CIM qualifier PropertyUsage is currently not supported by this implementation
QUALIFIER.DECLARATION PropertyUsage
CIM_ERR_FAILED: CIM qualifier Provider is currently not supported by this implementation
QUALIFIER.DECLARATION Provider
CIM_ERR_FAILED: CIM qualifier Read is currently not supported by this implementation
QUALIFIER.DECLARATION Read
CIM_ERR_FAILED: CIM qualifier Schema is currently not supported by this implementation
QUALIFIER.DECLARATION Schema
CIM_ERR_FAILED: CIM qualifier Source is currently not supported by this implementation
QUALIFIER.DECLARATION Source
CIM_ERR_FAILED: CIM qualifier SourceType is currently not supported by this implementation
QUALIFIER.DECLARATION SourceType
CIM_ERR_FAILED: CIM qualifier Static is currently not supported by this implementation
QUALIFIER.DECLARATION Static
CIM_ERR_FAILED: CIM qualifier Syntax is currently not supported by this implementation
QUALIFIER.DECLARATION Syntax
CIM_ERR_FAILED: CIM qualifier SyntaxType is currently not supported by this implementation
QUALIFIER.DECLARATION SyntaxType
CIM_ERR_FAILED: CIM qualifier Terminal is currently not supported by this implementation
QUALIFIER.DECLARATION Terminal
CIM_ERR_FAILED: CIM qualifier TriggerType is currently not supported by this implementation
QUALIFIER.DECLARATION TriggerType
CIM_ERR_FAILED: CIM qualifier UnknownValues is currently not supported by this implementation
QUALIFIER.DECLARATION UnknownValues
CIM_ERR_FAILED: CIM qualifier UnsupportedValues is currently not supported by this implementation
QUALIFIER.DECLARATION UnsupportedValues
CIM_ERR_FAILED: CIM qualifier Write is currently not supported by this implementation
QUALIFIER.DECLARATION Write
CIM_ERR_FAILED: Unknown qualifier Deprecated found in property ScheduledStartTime
CIM_Job
CIM_ERR_FAILED: Unknown qualifier Write found in property DeleteOnCompletion
CIM_JobSettingData
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_ConcreteJob: CIM_Job
CIM_ConcreteJob
CIM_ERR_FAILED: Unknown qualifier Write found in property EnabledDefault
CIM_EnabledLogicalElement
CIM_ERR_FAILED: Unknown qualifier Write found in property PrimaryOwnerName
CIM_System
CIM_ERR_FAILED: Unknown qualifier Write found in property PrimaryOwnerName
CIM_Service
CIM_ERR_FAILED: Unknown qualifier Gauge found in property AvailableSpace
CIM_FileSystem
CIM_ERR_FAILED: Unknown qualifier Deprecated found in property array PowerManagementCapabilities
CIM_ComputerSystem
CIM_ERR_FAILED: Unknown qualifier Gauge found in property NumberOfUsers
CIM_OperatingSystem
CIM_ERR_FAILED: Unknown qualifier Gauge found in property FileSize
CIM_LogicalFile
CIM_ERR_FAILED: Unknown qualifier Deprecated found in property PowerManagementSupported
CIM_LogicalDevice
CIM_ERR_FAILED: No such override property in superclass CIM_System: EnabledState
CIM_ApplicationSystem
CIM_ERR_FAILED: Unknown qualifier Gauge found in property WorkingSetSize
CIM_Process
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_LogicalPort: CIM_LogicalDevice
CIM_LogicalPort
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_Processor: CIM_LogicalDevice
CIM_Processor
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_NetworkAdapter: CIM_LogicalDevice
CIM_NetworkAdapter
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_NetworkPort: CIM_LogicalPort
CIM_NetworkPort
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_OSProcess
CIM_OSProcess
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_FRUIncludesProduct
CIM_FRUIncludesProduct
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_ProductParentChild
CIM_ProductParentChild
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_FileStorage
CIM_FileStorage
CIM_ERR_FAILED: Unknown qualifier Deprecated found in class CIM_ProvidesServiceToElement
CIM_ProvidesServiceToElement
CIM_ERR_FAILED: Class CIM_OperatingSystem referenced by association CIM_RunningOS does not exist.
CIM_RunningOS
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_SystemDevice
CIM_SystemDevice
CIM_ERR_FAILED: Class CIM_OperatingSystem referenced by association CIM_BootOSFromFS does not exist.
CIM_BootOSFromFS
CIM_ERR_FAILED: Can not decrease MaxLen qualifier from 1,024 to 256 in property SAP_Namespace.Name
SAP_Namespace
CIM_ERR_FAILED: Can not decrease MaxLen qualifier from 1,024 to 256 in property SAP_ManagedType.Name
SAP_ManagedType
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class SAP_ACENetworkInterface: CIM_NetworkPort
SAP_ACENetworkInterface
CIM_ERR_FAILED: Unknown qualifier Deprecated found in class SAP_JCODestination
SAP_JCODestination
CIM_ERR_FAILED: Unknown qualifier Deprecated found in class SAP_MsgServJCODestination
SAP_MsgServJCODestination
CIM_ERR_FAILED: Unknown qualifier Deprecated found in class SAP_AppServJCODestination
SAP_AppServJCODestination
CIM_ERR_FAILED: Unknown qualifier STATIC found in property AccSldModelVersion2
SAP_ACEEngine
CIM_ERR_FAILED: Class SAP_ACEEngine referenced by association SAP_ACEAssociatedVirtualizationManager does not exist.
SAP_ACEAssociatedVirtualizationManager
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class SAP_ACENetworkInterfaceComponent: CIM_SystemDevice
SAP_ACENetworkInterfaceComponent
CIM_ERR_FAILED: Class SAP_ACEEngine referenced by association SAP_HostedACEEngine does not exist.
SAP_HostedACEEngine
CIM_ERR_FAILED: Class SAP_ACENetworkInterface referenced by association SAP_ACENetworkToNetworkInterface does not exist.
SAP_ACENetworkToNetworkInterface

Hi Mehul,
try to go to the administration page of the SLD and choose for profile. In here select the option 'objectmanager'. Here set the following settings:
BufferInstances -> false
RejectUnsupportedCIMQualifiers -> false
StrictModifyClassChecks -> false
after this save the settings and stop and start the SLD from within the SLD itself. Then re-import the CIM model and the contect (so both CIMSAP and the CRdelta).
This should solve the error messages (I had the same issue before).
Regards,
Nico...
P.S. Please put the question on solved if this solves this issue for you as well to help other people with the same problem.

Similar Messages

  • Error while importing zip file for second time to B2B through ant script

    [echo] args=import
    importstatus:
    [echo] Commandline arguments 1: [import]
    [echo] Import with overwrite=true
    [echo] B2BCommandLineUtility: importRepository: Error messages:
    [echo] MDS-00521: error while reading document /soa/b2b/tpa_JOvrtiV-7030143
    019445112136.xml from metadata repository
    [echo] MDS-00520: failure to read document /soa/b2b/tpa_JOvrtiV-70301430194
    45112136.xml because it is not in the metadata repository
    [echo] MDS-00911: Document with name "/soa/b2b/tpa_JOvrtiV-7030143019445112
    136.xml" and version 16 does not exist in the repository.
    [echo] ORA-01403: no data found
    [echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407
    [echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603
    [echo] ORA-06512: at line 1
    [echo]
    [echo] ORA-01403: no data found
    [echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407
    [echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603
    [echo] ORA-06512: at line 1
    [echo]
    [echo] ORA-01403: no data found
    [echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407
    [echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603
    [echo] ORA-06512: at line 1
    [echo]
    [echo]
    Can anybody plz help???
    Thanks in Advance!!!

    Hi,
    Even I am getting the same error while importing the .zip file for the second time through B2B console-->Administration-->Import/export tab.
    But again it works for the third time..
    Error Message:
    Import of file OriginalProject.zip failed. MDS-00521: error while reading document /soa/b2b/tpa_MnjhBHh-70301432125893445241.xml from metadata repository MDS-00520: failure to read document /soa/b2b/tpa_MnjhBHh-70301432125893445241.xml because it is not in the metadata repository MDS-00911: Document with name "/soa/b2b/tpa_MnjhBHh-70301432125893445241.xml" and version 34 does not exist in the repository. ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1 ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1 ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1
    Please help...

  • Error in Importing snapshot of policies : oaam_base_snapshot.zip

    Hi ,
    I am trying to import oaam_base_snapshot.zip file from MW_HOME/IDM_ORACLE_HOME/oaam/init directory through OAAM Admin console i.e http://host:14200/oaam_admin
    and getting the following error.
    ssages for this page are listed below. 
    Failed to import Policies Imported file is either empty or invalid.
    File provided does not appear to be correct for Import action.
    Even though there is NO Error in importing the oaam_policies.zip from MW_HOME/IDM_ORACLE_HOME/oaam/init directory But getting the above error while importing oaam_base_snapshot.zip file
    Any Idea what the above error means ?   Appreciate the response.
      The following  Steps that I 've performed.
    1. Created the required Schemas with rcu in oracle DB 11.2.0.3
    2 Installed Oracle Identity and Access Management (11.1.2.0.0) on WLS 10.3.6 with jdk1.6.0_30
      3. Configured the DOMAIN for oaam_admin_server1,oaam_offline_server1 , oaam_server_server1 And oam_server1
      4.Configure the Database Security Store with ..../oracle/Middleware/Oracle_IDM/common/tools/configureSecurityStore.py -d -c IAM... Successfully
      5 Set Up Oracle Adaptive Access Manager Database Credentials in the Credential Store Framework following this Doc.  http://docs.oracle.com/cd/E37115_01/admin.1112/e27207/post.htm#AAMAD4521
    Thanks & Regards
      MZ

    How do u relink executable file using adadmin.exe- Open a new DOS session
    - Source the environment file (Issue "envshell.cmd" under %APPL_TOP%)
    - run 'adadmin'
    - Select 'Maintain Applications Files menu'
    - Select 'Relink Applications programs'
    Enter list of products to link ('all' for all products) [all] : fnd
    Generate specific executables for each selected product [No] ? yes
    Enter executables to relink, or enter 'all' [all] : <Enter name of executable file>

  • Getting error while importing CRDelta file into SLD

    When we are applying SAP Note 669669 - Importing delta in SLD we are getting the below mentioned error message.
    "The selected aggregate import is not applicable to the current version SAP_CR2.0 of the target namespace"
    We are trying to import the zip file CRDelta1511_0-10004549.ZIP.
    However we were successfully able to import the cimsap1511_0-10004549.zip into the SLD successfully.
    We are doing this import activity (upgrading the SLD) as we are unable to locate the ESS related mandatory Software Component EP_BUILDT in the current SLD version.
    Waiting for a quick response
    Regards,
    Narpal

    Hello Sihag,
    No matter what product version we choose it throws the same error.
    But when I give Integration process(in the same software component where the integration scenario) for the application component and then creating it works.
    Afterwards I removed the integration process from application system, and its not throwing any error when i check (F7) in Integration scenario.
    907897 - Check this before you import
    Before you upgrade to the model version 1.5, check which version is currently imported in the SLD Web UI (Administration -> Details). If the current version is lower than 1.4.30, import model 1.4.x (x must be 30 or higher) before updating to model version 1.5. You can find this version on SAP Service marketplace under SAP MASTER DATA FOR SLD 2.0, "SAP CIM model 1.4 Support Package 08". Version Support Package 18 already contains the data for the conversion to Version 1.5.
    Do let me know if your problem is getting resolved.
    Thank you.
    Regards,
    Manomeet
    - Award points if helpful -

  • Error in importing Configuration objects of PI 7.0 to PI 7.1

    Hi All,
    My server is upgraded from PI 7.0 to PI 7.1.
    I am getting Error while  importing Configuration objects of PI 7.0 to PI 7.1 now.
    Pls see the below error
    Attempt to access the 1 requested objects on 1 failed. Detailed information:  com.sap.aii.ib.core.roa.RoaObjectAccessException: Attempt to read object Adapter Metadata Mail | http://sap.com/xi/XI/System, type AdapterMetaData from application REPOSITORY on system REPOSITORY failed. Object does not exist. Detailed informatio n: Software component version with key ID: b38bcd00e47111d7afacde420a1145a5 not found
    Pls suggest

    Hi,
    It seems that adapter metadata has not been loaded into integration repository and because of that when you are trying to import configuration objects in ID then you are getting the error.
    The SAP adapter metadata objects are located under the namespace http://sap.com/xi/XI/System of software component SAP BASIS.
    What you can do is, if you have installation dvd's then you can copy from their or you can simply [_DOWNLOAD_|https://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20 ] from sap market place (refer this [thread|how to import Adapter metadata;) (you must have S-user id for this) and then after you need to do as mentioned below...
    1. First unzip the file (if it is zipped) and then put it in the import directory: \usr\sap\<SID>\SYS\global\xi\repository_server\import\
    2. Now login to IR and then from menu TOOLS ---> Import design objects and import it.
    3. After that in ID, Environment ---> Clear SLD Data Cache
    4. Now you can try to import configuration objects...
    Regards,
    Sarvesh

  • Canon FS100 error while importing

    I have read comments about it working easily with iMovie08, and having used other cams and having no problems with .mod files, I was surprised this doesn't work.
    I plug in the camera, turn it on and get a NO NAME drive come up, i then load up iMovie08 and it starts to create thumbnails. The a box jumps up and asks which clips to select or select all. i have now done this a few times, even just selecting a 10 sec clip to test on, once the blue zips across i get error on importing 1/1 clip, I press done and it goes back to the new event and there is nothing.
    i have tried using the canon software which is a joke, I have looked everywhere for something I might be doing wrong, all drivers and updates are upto date, so what else ?
    can I have too many codecs in quicktime ? will the conflict ?
    I also have divx, flip4mac installed.
    would really appreciate some advice, as I have a movie i need to edit and can't do what I normally do
    Dan

    anyone out there that can help ?

  • Error while importing music in iMovie 11 From itunes 10

    Error while importing music in iMovie 11
    I have the same error explained in a other post which was still left unanswered
    I have this sound problem after reorganising folders by itunes, i tried to delete al files in itunes and also
    deleted the xml file in the itunes dir, created new playlists, but still i have no music sound in imovie timeline
    after dragging a mp3 into it. When i preview the file in imovie it souds ok.
    Also i see the red dot with the number 1 in the itunes logo while dragging the mp3.
    Is there a solution for this problem?
    Former post;
    Re: Error while importing music in iMovie 09 from iTunes 09
    Posted: Jul 24, 2010 8:08 AM   in response to: vincentplaces  
    I'm having the exact same issue, but still haven't figured out what it is. I note that at the top of this thread it indicates that there are two "helpful" entries and one "solved" entry, but I can't find the solved one, so maybe someone will repost it here or kindly link to it.
    There is one icon missing though.
    As I read through the excellent tutorial at http://www.kenstone.net/fcphomepage/imovie_09stone.html I scroll down to the point where he talks about dragging music in from iTunes, which is what I'm trying to do. I can see, in his screen shot, the extra little icon that is a red oval and a white "1" in it. I don't get that icon when I am trying to drag my music into the video. I do get the green and white plus icon when I try to drag my music in. Also I DO get BOTH the red 1 and the green plus when I try dragging in a sound effect, which I can do with no problem. But why not the music?
    I've been able to drag in music with no problem in other productions, so I can't figure out what is going on with this one. I'm sure there is a setting somewhere that got flipped, but I can't figure out where.
    In desperation I also tried adding an extra title slide at the end of my video just to make sure there is more video time than music time in the production, but that didn't help at all.
    Any help guys?
    iMac 27"   Mac OS X (10.6.4)    

    Hi
    Due to some kind of copy protection in iTunes - I don't copy directly from this in iMovie
    to my projects. (Most often the result of doing it in iMovie is a DVD without any sound)
    I do
    • In iTunes - collect needed audio into a new Playlist
    • then burn this out as an Audio-CD .aiff (NOT .mp3)
    • This CD I copy into a folder on my Mac (often containing other material that's connected to the project)
    • And then I drag and drop these .aiff files into my movie project in iMovie.
    This works Greatly and even more so when I do my DVD.
    Yours Bengt W

  • Error while importing a new CERT in oracle 10G B2B

    Hi All,
    I am trying to upload a new certificate in 10 G B2B server, its not updating a certificate, I am facing the below error while importing
    Error
    An error occurred when updating the certificate.
    Error -: AIP-16001: The model validation engine failed due to an internal system error.
    Error -: AIP-11052: Writing following objects: Certificate failed due to following constraint violation: CERTIFICATE. CAN NOT UPDATE UNVERSIONABLE OBJECT IN A VALIDATED CONFIGURATION.
    Note: Please help me in resolving this ASAP.
    Regards
    Sai

    Hi Sai,
    It seems you are updating certificate in a delivery channel which is being used in a validated (or may be deployed) agreement. Please retire/purge any deployed configuration which is using that delivery channel and also make sure no such agreement is in valid state(which is using this delivery channel).
    Regards,
    Anuj

  • Error while importing a table index.

    Hi,
    We are facing a problem while importing an index to the production region. Below are the details.
    1. A secondary index was created on standard SAP table ILOA in DEV region.
    2. The Index was successfully moved to the Quality system, without any glitches.
    3. Due to some issue (releated to testing, for which we had to revert back the changes), we had to delete the index on ILOA in the DEV region. The transports were moved to the PPD region and hence, the index on ILOA was deleted in PPD also.
    4. Once the issue related to testing was resolved, we again created an index on the table ILOA and moved it to PPD.
    All these 4 mentioned steps happened successfully and in PPD there was no error while importing the transports.
    But, while moving the above transports to the Production region, there was an error :
    "Index ILOA~Y could not be activated
    (E - No index ILOA~Y found with status M)"
    Please note that Y is the name of the index that was created on the table ILOA.
    The error code that we have got is "8".
    Can anyone please shed any light on what the issue is?? WE cannot re-import the transports in to Production without analysing this issue,because our client doesnt permit that.
    Thanks and eagerly awaiting a kind reply.
    Regards,
    Raghavendra.

    You've three transports - one to create the index, one to delete, and one to recreate.  It could be that the the third one tried to run before the database had finished with the second?
    Have you looked on SE14 for the actual status on production of the index?
    matt

  • Error while importing N Accounts to 1 Address with UCM Batch Manager

    Hi,
    I got a problem with importing Accounts using the UCM Batch Manager. Previous steps were loading the EIM Tables EIM_UCM_ORG and EIM_UCM_ADRPER. To associate addresses I used the column EIM_UCM_ADRPER.PAR_UCM_ACCNT_UID. No errors occured during an Enterprise Integration Mgr jobs to load the data into SDH tables.
    The error described below occurs if I have N Accounts using one Address. Example:
    h5. Account Name --> City --> Postal Code --> State --> Street
    Account #1 --- Munich --- 80331 --- N/A --- Some Street 1
    Account #2 --- Munich --- 80331 --- N/A --- Some Street 1
    h5. If I try to get the Accounts into the Base tables using the UCM Batch Manager I get the following message from the log file:
    ObjMgrBusCompLog     Error     1     000003084c571160:0     2010-08-03 19:11:14     (odbccon.cpp (2097)) SBL-DBC-00111: An error has occurred writing to a record.
    Please continue or ask your systems administrator to check your application configuration if the problem persists.
    DBCLog     DBCLogError     1     000003084c571160:0     2010-08-03 19:11:14     SQLError: [23000],[Microsoft][SQL Native Client][SQL Server]Cannot insert duplicate key row in object 'dbo.S_ADDR_PER'-Objekt with unique index 'S_ADDR_PER_U1'.
    DBCLog     DBCLogError     1     000003084c571160:0     2010-08-03 19:11:14     SQLError: [01000],[Microsoft][SQL Native Client][SQL Server]The statement has been terminated.
    ObjMgrBusCompLog     Error     1     000003084c571160:0     2010-08-03 19:11:14     (sqlobj.cpp (43735)) SBL-DAT-00381: A record that contains identical values to the record you have created already exists.
    If you would like to enter a new record, please ensure that the field values are unique.
    ObjMgrLog     Error     1     000003084c571160:0     2010-08-03 19:11:14     (adptutils.cpp (5715)) SBL-EAI-04381: For instance of Integration Component 'Account_Business Address', using user key '[City] = "Munich" AND [Postal Code] = "80331" AND [State] = "N/A" AND [Street Address] = "Some Street 1"', a record with identical values already exists in the Siebel database.
    Please ensure that the field values in the input message are unique.
    EAISiebAdpt     EAISiebAdptErr     1     000003084c571160:0     2010-08-03 19:11:15     [0] For instance of Integration Component 'Account_Business Address', using user key '[City] = "Munich" AND [Postal Code] = "80331" AND [State] = "N/A" AND [Street Address] = "Some Street 1"', a record with identical values already exists in the Siebel database.
    Please ensure that the field values in the input message are unique.(SBL-EAI-04381) (0x75017d)
    h5. Result:
    Account #1 gets inserted with Record Type: "Source-Insert"
    Account #2 will not be imported and gets Record Type: "Incomplete"
    Does anyone know how to handle this problem?
    Many Thanks
    Sebastian
    Edited by: user13098670 on 04.08.2010 06:34

    I have selected the option
    Add new metadata and replace existing objetcs. But it is not importing. Also I tried other options like
    1. deleting the existing mapping and tried.
    2. Putting the mapping in recycle bin and try.
    3. Take it from recycle bin.Even during taking it from recycle it is giving me the following error .
    Error occurred importing mapping
    <DWH_CMMDTY_INVC_FACT_MAP/DWH_CMMDTY_INVC_FACT_MAP>
    (at line 141).
    Detailed Error Message:
    API2014: Internal Error: Error in createStage:
    In above all cases it is giving me the error.
    Could you please help?

  • Javac(1.4.2) gives error in import statement

    Hi All,
    I am facing a surprising problem. I have 2 java class files. I write the import statement for second one in the first one. There is no package & these are in the same directory. I have compiled the second one. But when I try to compile the First one. Javac throws error at import statement like below :
    D:\Clubs\oct\6>javac -d . ManojTest.java
    ManojTest.java:1: '.' expected
    import SessionBean;
    ^
    1 error
    My Java Files are as below :
    import SessionBean;
    public class ManojTest
         public static void main(String args[])
    //ManojTest.java
    public class SessionBean
         public static void main(String args[])
    //SessionBean.java
    I have compiled SessionBean.java successfully but when I try to compile ManojTest.java I get error mentioned above.
    However this probelm comes when I use j2se 1.4.2.. but works in j2se 1.3.1..
    Another way could be I use package structure.
    But I can't do any of these, as I have to port my big project to j2se1.4.2.. from j2se1.3.1.. (Live project is running on Tomcat).
    Problems is similar in Unix & Windows both.
    Is this javac compiler issue or there is some setting which I can make.
    I have already included . (dot) in PATH & CLASSPATH environment varibales.
    Please help me out if there is any way around this, as i am stuck up in between
    thank you
    Manoj :confused:

    Use a package and then add that package in your classpathOr don't use a package, leave the file in the default (noname) package, and don't use the import statement. Java will find it in the default package without the import.
    Explicit import statements from the default package are no longer allowed

  • Order Import Erroring while importing closed Order

    Hello,
    I am working on importing closed order for historical purpose and order import is erroring without giving much details. I set the debug level to 5 and log file contains only one error' ORDER IMPORT FAIL DUE TO UNEXPECTED ERROR.
    I am attaching the insert statements for headers and lines. Please review and hope to get a solution from one of the OM gurus here.
    Thanks a bunch in advance.
    Anant
    INSERT INTO OE_HEADERS_IFACE_ALL
    (ORIG_SYS_DOCUMENT_REF
    ,ORDER_SOURCE_ID
    ,ORG_ID
    ,ORDER_NUMBER
    ,ORDERED_DATE
    ,ORDER_TYPE_ID
    ,PRICE_LIST_ID
    ,SOLD_FROM_ORG_ID
    ,SOLD_TO_ORG_ID
    ,CUSTOMER_NUMBER
    ,TAX_EXEMPT_FLAG
    ,TRANSACTIONAL_CURR_CODE
    ,INVOICING_RULE_ID
    ,ACCOUNTING_RULE_ID
    ,PAYMENT_TERM_ID
    ,CREATION_DATE
    ,CREATED_BY
    ,LAST_UPDATED_BY
    ,LAST_UPDATE_DATE
    ,SALESREP_ID
    ,OPERATION_CODE
    ,CLOSED_FLAG --BOOKED_FLAG
    ,DROP_SHIP_FLAG
    ,SHIP_TO_ORG_ID
    ,INVOICE_TO_ORG_ID
    ,SHIP_FROM_ORG_ID
    ,ORIG_SYS_CUSTOMER_REF
    ,ORIG_SHIP_ADDRESS_REF
    ,ORDER_CATEGORY
    ,BOOKED_FLAG)
    VALUES
    ('514'     -- ORIG_SYS_DOCUMENT_REF
    ,1001                    -- ORDER SOURCE ID
    ,'102'                    -- ORG ID          
    ,10001006               -- ORDER NUMBER
    ,SYSDATE               -- ORDERED_DATE               
    ,1021                    -- ORDER TYPE ID
    ,6024                    -- PRICE LIST ID
    ,102                    -- SOLD FROM ORG ID
    ,2632                    -- SOLD TO ORG ID      
    ,'UN1666'               -- CUSTOMER NUMBER
    ,'S'                    -- TAX_EXEMPT_FLAG
    ,'USD'                    -- TRANS CURRENCY_CODE
    ,-2                         -- INVOICING_RULE_ID
    ,1                         -- ACCOUNTING_RULE_ID
    ,5                         -- TERMS_ID
    ,SYSDATE               -- CREATION_DATE
    ,1150                    -- CREATED_BY
    ,1150                    -- LAST_UPDATED_BY
    ,SYSDATE               -- LAST_UPDATE_DATE
    ,-3                         -- SALESREP_ID
    ,'INSERT'               -- OPERATION CODE
    ,'Y'                    -- CLOSED FLAG
    ,'N'                    -- DROP SHIP FLAG
    ,NULL                     -- SHIP_TO_ORG_ID (SITE USE ID FROM RA_SITE_USES_ALL, SITE_USE_CODE = SHIP_TO)
    ,1712                     -- INVOICE_TO_ORG_ID (SITE USE ID FROM RA_SITE_USES_ALL, SITE_USE_CODE = BILL_TO)
    ,103                    -- SHIP FROM ORG ID
    ,NULL                    -- ORIG_SYS_CUSTOMER_REF
    ,NULL                    -- ORIG_SHIP_ADDRESS_REF
    ,'Order'               -- ORDER CATEGORY
    ,'N')                    -- BOOKED_FLAG
    COMMIT
    INSERT INTO OE_LINES_IFACE_ALL
    (ORDER_SOURCE_ID
    ,ORIG_SYS_DOCUMENT_REF
    ,ORIG_SYS_LINE_REF
    ,ORIG_SYS_SHIPMENT_REF
    ,INVENTORY_ITEM
    ,REQUEST_DATE
    ,ORDERED_QUANTITY
    ,ORDER_QUANTITY_UOM
    ,PRICE_LIST_ID
    ,UNIT_SELLING_PRICE --UNIT_LIST_PRICE
    ,ACCOUNTING_RULE_ID
    ,PAYMENT_TERM_ID
    ,SALESREP_ID
    ,CREATION_DATE
    ,CREATED_BY
    ,LAST_UPDATE_DATE
    ,LAST_UPDATED_BY
    ,OPERATION_CODE
    ,DROP_SHIP_FLAG
    ,SHIP_TO_ADDRESS1
    ,SHIP_TO_ADDRESS2
    ,SHIP_TO_CITY
    ,SHIP_TO_POSTAL_CODE
    ,SHIP_TO_sTATE
    ,SHIP_TO_COUNTRY
    ,CLOSED_FLAG
    ,ITEM_TYPE_CODE
    ,INVENTORY_ITEM_ID
    ,DELIVERY_LEAD_TIME
    ,DELIVERY_ID
    ,TAX_EXEMPT_FLAG)
    VALUES
    (1001                    -- ORDER SOURCE ID
    ,'514'          -- ORIG SYS DOC REF
    ,'L4'               -- ORIG SYS LINE REF
    ,NULL               -- ORIG SYS SHIP REF
    ,'KR4R362478-07'     -- ITEM NUMBER
    ,SYSDATE               -- REQUEST DATE
    ,40                    -- ORDER QTY
    ,'EA'                    -- ORDER QTY UOM
    ,6024                    -- PRICE LIST ID
    ,95                -- UNIT LIST PRICE
    ,1                    -- ACCOUNTING RULE ID
    ,5                    -- PAY TERM ID
    ,-3                    -- SALESREP ID
    ,SYSDATE               -- CREATION DATE
    ,1150                    -- CREATED BY
    ,SYSDATE               -- LAST UPDATE DATE
    ,1150                    -- LAST UPDATED BY
    ,'INSERT'               -- OPERATION_CODE
    ,'N'                    -- DROP SHIP FLAG
    ,NULL --'1003 WASHINGTON AVE'     -- SHIP ADD1
    ,NULL --'SUITE 340'          -- SHIP ADD2
    ,NULL -- 'CHICAGO'          -- CITY
    ,NULL -- 60610               -- POSTAL
    ,NULL -- 'IL'               -- STATE
    ,NULL -- 'US')               -- COUNTRY
    ,'Y'
    ,'FG'
    ,7488
    ,1
    ,1
    ,'Y')
    commit
    ---------------------------------------

    Ganapati,
    Did you try passing the customer_number like -1 or some random high number that does not exist in hz_cust_accounts table in the account_number for party_type='PERSON' in the table oe_customer_info_iface_all?
    As I see this check for the first_name||last_name is done only of the customer number is not passed and customer_number is not used any where in the customer creation (if you are using automatic numbering for the customer accounts then you will obviously not passing any value to new_account_number which is used to created).
    Give it a try while I keep myself busy with my airport woes here.
    Thanks
    Nagamohan

  • MII 14.0 SP4 :Migration error while importing SAP BM Templates

    Hi Experts,
    I am facing some migration errors while importing SAP Batch Manufacturing Templates into MII 14.0 SP4.
    There are almost 23 transactions which are not getting imported and the error message for all of them is-
    "Unable to migrate transaction Unable to import file
    <Name of the Transaction>"
    Any first hand experiences will be really helpful for me to proceed further.
    Regards,
    Muddassar Khan

    Hi All,
    Got the solution. The STARTUP.BAT file is been placed in the installation directory(usr/sap) and then it works fine. Also I have installed the patches and all working fine.
    Any way thanks for the answer christian libich.
    Regards
    G.Partheeban

  • Error while import PAR with schedule task

    Hi everybody
    I've the following error while import a new PAR with schedule task in Portal NW04s
    Inner Stack is:
    Unable to lock the local configuration to run import "import_it.tsf.pld.cercapersone.updateadgruppofs.st.prjconfig_config_fwk_service_4692550,4692550_(ready)".
    System error is "LockConfigException: Configuration framework system error: "configuration-lock-service overloaded: cannot acquire central-lock file for config://local"".
    Inner Stack is:
    LockConfigException: Configuration framework system error: "configuration-lock-service overloaded: cannot acquire central-lock file for config://local"
    at com.sapportals.config.fwk.data.ConfigLockManager.lockWithDependent(ConfigLockManager.java:507)
    thanks in advance

    Hi Ram,
    I've encountered the problem only on productive instance with offline deployment (Scheduler Tasks reinitialize CRT). Before a restart I have to make sure it works.
    thanks for your help!
    Gennaro

  • Error: An error occurred importing the file. Detail: File does not exist or

    Hi,
    I am getting the error the below error while importing the file in FDM. I have read and write access to the folder. I tried loading text and excel files, I am getting the same error.
    An error occurred importing the file.
    Detail: File does not exist or access denied.
    Thanks.

    Hi Tony,
    Thanks for the reply.
    I have Oracle Database and the version is 11.1.0.7; So even for this version do I need to have SQLLDR.exe on the server where FDM is installed.
    Thanks,
    Edited by: user10720012 on May 16, 2011 11:42 AM

Maybe you are looking for