Error on publishing workflow from sharepoint designer

when I try to publish my workflow created with Workflow Designer I get this error message
System.ServiceModel.ServerTooBusyException: The HTTP service located at http://serversp:32843/a5bd4fa831174777a536161331fdf118/AppMng.svc is
unavailable. This could be because the service is too busy or because no endpoint was found listening at the specified address. Please ensure that the address is correct and try accessing the service again later.
---> System.Net.WebException: The remote server returned an error: (503) Server Unavailable. at System.Net.HttpWebRequest.GetResponse()
workflow 2013 is already connected to sharepoint server i get this error on the final step of publishing a workflow

Hi,
As I understand, when you published the workflow in SharePoint Designer you encountered the error.
I suggest you follow the steps below to troubleshoot this issue:
1. You could check if the App Management Service is started. (Go to CA -> System Settings -> Services on server -> check if the App Management Service is started.) If not, start the App Management Service, then perform iisreset.
2. If the issue still exists, you could click start->click “run”->type in “services.msc” ->restart "SharePoint Search Host Service". This is because there is not enough space to start the service. Note that the "SharePoint Search
Host Service" consumes a lot of memory.
The article below is about Error: The Requested Service, AppMng.svc Could Not be Activated.
http://www.c-sharpcorner.com/UploadFile/anavijai/error-the-requested-service-appmng-svc-could-not-be-activa/
There is a similar case:
https://social.msdn.microsoft.com/Forums/en-US/b07e842e-71b8-4e66-a5d3-208a8ba28523/error-occurred-in-deployment-step-install-app-for-sharepoint?forum=appsforsharepoint
Best regards,
Sara Fan
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

Getting error while publishing workflow using SP designer for SharePoint 2013

Hi,
I am try to setup Workflow manager for our sharepoint applications.
WF manager set ran without any issue.
I registered the SPWorkflow service which succeeded as well. The Workflow service application shows "Workflow is connected"
I am creating a workflow using sharepoint designer using my credential (not Service account). I am able to save it but while publishing, its prompting with an error.
The error says "Errors were found while compiling the workflow.The workflow files were saved but cannot run." Clicking advanced button show
"Microsoft.SharePoint.SPException: We're sorry, we weren't able to complete the operation, please try again in a few minutes. If you see this message repeatedly, contact your administrator.
at Microsoft.SharePoint.SPScaleOutDatabaseMap.CreateSqlSession(ISPScaleOutDatabaseMapProvider mapProvider, Byte[] compositeKey, Guid forceRefreshVersion, Guid& version)
at Microsoft.SharePoint.SPScaleOutDatabaseCommandExecutor.Execute(ExecuteDelegate operation, ISPScaleOutDatabaseMapProvider mapProvide"
Any help would be highly appreciated
Thanks,

Hi,
According to your post, my understanding is that you got error while publishing workflow using SharePoint designer for SharePoint 2013.
Please check whether the Central Admin > Manage Service Application-> “App Management Service” is started.
Please check whether the “Configure service application associations”, ”App Management Service” is already associated.
Then please check whether the “Manage Services on server” and the “App Management Service” is started.
In addition, please try to re-register Workflow Service.
If the issues still exists, please follow the steps in the
Steps to Verify that Server Is Correctly Set Up. After you verified that the server is correctly set up, follow the steps in the
Steps to Troubleshoot Workflow Management Service and
Troubleshooting the Service Bus for Windows Server then retry your action related to publishing workflows
More information:
http://wp.ahcheng.com/2013/03/23/error-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run/
http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Error while saving a workflow via sharepoint designer: Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.

While saving a workflow using SharePoint designer on a SharePoint site, I get the following error:
Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.
Steps to recreate error:
Login to the WFE server hosting IIS and workflow manager, open SharePoint Designer 2013 and login to a SharePoint site.
Access the list using SharePoint Designer 2013, in the workflow section, click new workflow.
In the new workflow dialog, enter workflow details, click save (see screenshot below).
Error message is displayed as below:
After restarting SharePoint Designer, the saved workflow is not seen in the site/workflows or list/workflow section.
Workaround
When the above steps are repeated while accessing the site via SPD from any other box besides the WFE/Workflow manager host server, the error is not encountered and its possible to save/publish workflows.
Notes
Workflow Manager 1.0 is installed.
The site has been registered with Workflow manager using Register-SPWorkflowService
cmdlet.
Any clue on why is this happening?

Hi Vivek,
Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Errors were found when compiling workflow in SharePoint Designer 2010

Hello there,
I've run into a interesting issue in SharePoint Designer 2010 when publishing a workflow. I now get the below error
Normally when I get this message I simply clear the SharePoint Designer 2010 cache described in this
article, however, in this case the issue still continued. Hence I started the process of trial and error and quickly realized that the Update Item action was the culprit. In this action I am updating approximately 70 columns. Currently, I have two such
actions running in sequence. When I added the third Update Item action to do the same, I started getting this error.
Has anyone else experienced this before? In the workflow I am currently working on I am going to have to using the Update Item action several times and update approximately 70 columns hence I am open to other ideas to do the same.
Thanks in advance.

Hi Entan Ming,
Thanks for your reply, Hope you are aware that while we create any new workflow using SharePoint Designer 2013. There are two ways (We can say Platforms) to create the new workflow 1. SharePoint
2010 and 2. SharePoint 2013.
If I choose second one I. e SharePoint 2013, and try to create, save and publish workflow it`s working fine. But whenever I select option no. 1 i.e. SharePoint 2010 Platform to create
the workflow, I am able to Create it , save it , but while I try to publish it I got an error:
Errors were found when compiling the workflow. The workflow files were saved but cannot be run.
When I click on Advance I got message:
Unexpected error on server associating the workflow
My question is that, I am not able to publish any workflow in SharePoint 2010 Platform, using SharePoint Designer 2013.
Before publishing a workflow, I click on ‘Check for errors’ button, there was no any error found.
Thanks & Regards Mr. Bajirao Shinde

Error while saving list workflow in sharepoint designer 2013

Hi,
I am trying to create custom workflow using sharepoint workflow 2013 at client side.While i am saving this,it thowas error-"Server side activities have been updated.you need to restart sharepoint designer to use the updated version
of activites"
I have installed 32-bit sharepoint designer 2013 in my system and i have no access to server.
I have also followed the solution and deleted the contents in the below location.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
Please help to solve the error.
Thank you

You need to install updated version of SharePoint designer.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/f255f4b4-1828-4ccb-983a-5efbf0e020ae/sharepoint-designer-2013-server-side-activties-have-been-updated-prompt?forum=sharepointcustomization
Try below:
http://stackoverflow.com/questions/19652391/error-while-saving-a-workflow-via-sharepoint-designer-server-side-activities-ha

Error while opening list workflow in SharePoint designer 2010

Hi,
I am trying to open list workflow in SharePoint designer 2010,its showing me the following page.
Please help me how will be able to edit the workflow.
While i click on "export to visio",its showing the error as "SharePoint designer encountered an error generating the visi workflow drawing".
Please help me to get the logic of the workflow,so that i can create new one.
Thank you

Hi Aditi,
Which type of workflow did you use?
Did you create the workflow using SharePoint 2010 Designer or built-in workflow template?
If the workflow was created using SharePoint 2010 Designer, for editing the workflow using SharePoint Designer, open the site with SharePoint 2010 Designer, then click the 'Workflows' in left panel. Then in the right panel, click the workflow that you
want to edit, then click 'edit workflow' under Customization.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

User Profiles option missing from SharePoint Designer 2013 workflows

I noticed the User Profiles is missing as a Data Source option in the SharePoint Designer 2013 workflow platform (see image); whereas, it exists in the SharePoint 2010 workflow platform. Is there a way to connect this feature in SharePoint 2013 workflows
by registering it or configuring through Workflow Manager? If not, what is the new approach in SP 2013 to call User Profiles services?

Hi,
Based on your description, you want to use user profile in SharePoint 2013 workflow.
In SharePoint 2013 workflow user profiles is missing, if you have to use the user profile, you can create a SharePoint 2010 workflow, and use Start a List workflow action in 2013 workflow to start the 2010 workflow.
The article below is about How to start a SharePoint 2010 Workflow within a SharePoint 2013 Workflow Using SharePoint Designer 2013
http://www.c-sharpcorner.com/UploadFile/anavijai/how-to-start-a-sharepoint-2010-workflow-within-a-sharepoint/
And in SharePoint 2013 there is an approach to user profile, you can add the action call http web service to get the information of user profile.
The article below is about how to use call http web service in SharePoint 2013 workflow.
https://msdn.microsoft.com/en-us/library/office/dn567558.aspx
Best regards
Sara Fan
TechNet Community Support

Workflow manager IIS site throws a 403 Forbidden error and published workflows throw an error 400 bad request

Hello All , Request your help on the below issue ,
We have a single server farm SP 2013 where workflow was working as expected but its broken now , Not sure
what caused this. Workflow manager is installed alongside Service Bus. Workflow Manager client is installed on the same SP server.
We are able to create and publish the workflows from SP Designer without errors but when we start the workflow from SharePoint list we get an error " Sorry something went wrong". We have tried creating new workflows but the same problem.
We receive the below error in event viewer.
Error processing management request. Method: PUT, RequestUri: http://server URL:12291/$Workflows/89c767d2-82d2-4bd9-8e5e-dcace81d844f, Error: System.ArgumentException: The remote server returned an error: (400) Bad Request. ---> System.Net.WebException:
The remote server returned an error: (400) Bad Request.
at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at Microsoft.ServiceBus.Messaging.ServiceBusResourceOperations.GetAsyncResult`1.EndGetResponse(GetAsyncResult`1 thisPtr, IAsyncResult ar)
at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.StepCallback(IAsyncResult result)
--- End of inner exception stack trace ---
Server stack trace:
Exception rethrown at [0]:
at Microsoft.Workflow.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.Workflow.Gateway.HttpAsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.Workflow.Gateway.WorkflowServiceGateway.<>c__DisplayClass6a.<EndCreateOrUpdateWorkflow>b__69()
at Microsoft.Workflow.Gateway.WorkflowServiceGateway.ExceptionFilter[T](Func`1 body)
at System.Threading.Tasks.TaskFactory`1.FromAsyncCoreLogic(IAsyncResult iar, Func`2 endFunction, Action`1 endAction, Task`1 promise, Boolean requiresSynchronization)
ULS logs give below error
Error 1 - Microsoft.Workflow.Client.InternalServerException: An internal error occured. For more details, please see the server logs. HTTP headers received from the server - ActivityId: ba6e77cb-aaae-41a0-9cc8-1ea817d0045e. NodeId: Servername.
Scope: /SharePoint/default/bc694777-7bbb-473e-ab2d-20087221a97a/5229793b-31a1-44b1-9b0b-374f38b762fd. Client ActivityId : a6daec9c-7139-7034-b4ee-edeb1f96ec2a. ---> System.Net.WebException: The remote server returned an error: (500) Internal Server Error.
at Microsoft.Workflow.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.Workflow.Client.HttpGetResponseAsyncResult`1.End(IAsyncResult result)
at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest request, T content) -
-- End of inner exception stack trace ---
at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest request, T content)
at Microsoft.Workflow.Client.WorkflowManagementClient.SendRequest[T](HttpWebRequest request, T content)
at Microsoft.Workflow.Client.WorkflowManager.Publish(WorkflowDescription description, Boolean terminateActiveInstances)
at Microsoft.SharePoint.WorkflowServices.FabricWorkflowManagementClient.PublishWorkflow(String serviceGroupName, WorkflowDescription workflow)
at Microsoft.SharePoint.WorkflowServices.WorkflowProxy.CreateDefinitionSubscription(String subscriptionName, String eventSource, List`1 eventTypes, String definitionName, IDictionary`2 metadata, WorkflowEventContext eventContext) StackTrace:
at Microsoft.Office.Server.Native.dll: (sig=35339f9c-8871-4ef1-9118-9c1bd0cb6598|2|microsoft.office.server.native.pdb, offset=131CE)
at Microsoft.Office.Server.Native.dll: (offset=21B4D)
Error 2 - Error publishing workflow subscription (republish or retry publish) information: Microsoft.Workflow.Client.InternalServerException: An internal error occured. For more details, please see the server logs. HTTP headers received
from the server - ActivityId: ba6e77cb-aaae-41a0-9cc8-1ea817d0045e. NodeId:
ServerName. Scope: /SharePoint/default/bc694777-7bbb-473e-ab2d-20087221a97a/5229793b-31a1-44b1-9b0b-374f38b762fd. Client ActivityId : a6daec9c-7139-7034-b4ee-edeb1f96ec2a. ---> System.Net.WebException: The remote server returned an error: (500)
Internal Server Error.
at Microsoft.Workflow.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.Workflow.Client.HttpGetResponseAsyncResult`1.End(IAsyncResult result)
at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest request, T content) -
-- End of inner exception stack trace ---
at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest request, T content)
at Microsoft.Workflow.Client.WorkflowManagementClient.SendRequest[T](HttpWebRequest request, T content)
at Microsoft.Workflow.Client.WorkflowManager.Publish(WorkflowDescription description, Boolean terminateActiveInstances)
at Microsoft.SharePoint.WorkflowServices.FabricWorkflowManagementClient.PublishWorkflow(String serviceGroupName, WorkflowDescription workflow)
at Microsoft.SharePoint.WorkflowServices.WorkflowProxy.CreateDefinitionSubscription(String subscriptionName, String eventSource, List`1 eventTypes, String definitionName, IDictionary`2 metadata, WorkflowEventContext eventContext)
at Microsoft.SharePoint.WorkflowServices.FabricSubscriptionService.<>c__DisplayClass1.<CreateDefinitionSubscription>b__0()
at Microsoft.SharePoint.WorkflowServices.WorkflowServiceContextExtensions.InvokeWithEcosystemRetry(WorkflowServicesContext context, EcosystemRequiredMethod method)
at Microsoft.SharePoint.WorkflowServices.FabricSubscriptionService.CreateDefinitionSubscription(String subscriptionName, Guid eventSourceId, String eventSource, List`1 eventNames, String definitionName, IDictionary`2 metadata, WorkflowEventContext eventContext)
at Microsoft.SharePoint.WorkflowServices.WorkflowSubscriptionStorageEventReceiver.ItemUpdating(SPItemEventProperties properties)
Error3 - Microsoft.Workflow.Client.InternalServerException: An internal error occured. For more details, please see the server logs. HTTP headers received from the server - ActivityId: ba6e77cb-aaae-41a0-9cc8-1ea817d0045e. NodeId: ServerName.
Scope: /SharePoint/default/bc694777-7bbb-473e-ab2d-20087221a97a/5229793b-31a1-44b1-9b0b-374f38b762fd. Client ActivityId : a6daec9c-7139-7034-b4ee-edeb1f96ec2a. ---> System.Net.WebException: The remote server returned an error: (500) Internal Server Error.
at SPRequest.AddOrUpdateItem: UserPrincipalName=i:0).w|s-1-5-21-182846760-3036401646-508972453-351846, AppPrincipalName= ,bstrUrl=http://sharepointsite ,bstrListName={48A21758-9123-48F0-9BDE-9EB632B07BC6} ,bAdd=False ,bSystemUpdate=False ,bPreserveItemVersion=False
,bPreserveItemUIVersion=False ,bUpdateNoVersion=False ,pbstrNewDocId=00000000-0000-0000-0000-000000000000 ,bHasNewDocId=False ,bstrVersion=16 ,bCheckOut=False ,bCheckin=False ,bUnRestrictedUpdateInProgress=True ,bMigration=False ,bPublish=False ,bstrFileName=<null>
Any help appreciated. Thanks in advance.

Hi,
As I understand, you encountered the issue when you published a workflow on SharePoint 2013 workflow platform.
I wonder does it work well before when using 2013 workflow platform? If it works before, did you install any updates or change the configuration to the workflow related settings?
If this is the first time after you installed workflow manager 2013, then I’d recommend you try re-registering workflow service per the link below and post the result:
http://technet.microsoft.com/en-us/library/jj663115(v=office.15).aspx
http://technet.microsoft.com/en-us/library/jj658588(v=office.15).aspx
From the message you accessed workflow host uri, please make sure the account to wfsetup and wfservice account are both in wfadmins group.
http://blogs.msdn.com/b/briangre/archive/2013/02/20/least-privilege-configuration-for-windows-azure-workflow-with-sharepoint-2013.aspx
Regards,
Rebecca Tu
TechNet Community Support

Not able to import visio 2013 workflow in sharepoint designer 2013

Hi,
I have installed SharePoint 2013 trial version. I have designed a workflow in Visio 2013. Now trying to import that Visio workflow in Sharepoint Designer, but import option is only enable for 2010 Visio workflow. I have installed workflow Manager 1.0
and Bus services also, but it is not working.

Hi Vikas,
Do you have SharePoint Workflow 2013 option in Platform Type dropdown list?
Please check if you have configure Workflow 2013 for your SharePoint environment.
http://social.msdn.microsoft.com/Forums/sharepoint/es-ES/f32fd648-8372-412d-b749-38dbe8f8a15c/sharepoint-designer-2013-workflow-import-visio-2013-diagram-greyed-out?forum=sharepointcustomization
http://social.technet.microsoft.com/Forums/sharepoint/en-US/81333cad-c11e-4f75-9a06-7229c0eadd02/spd-2013-workflow-import-from-visio-2013-greyed-out?forum=sharepointgeneral
http://msdn.microsoft.com/en-us/library/jj658588.aspx
Thanks
Daniel Yang
TechNet Community Support

Remove the last task of the stand approval process workflow in SharePoint Designer

Hello,
I am building a workflow in SharePoint Designer. I have added the standard approval process that comes stock in SharePoint. I also have the approval set up to handle change requests. This is where my issue is. A user can eather approve
a document or request changes(according to some limitations i have in place on the InfoPath form). If they approve, the workflow is complete. If they request a change, a request change task gets assigned to another user. This other user then
completes their review and submits their response. this then kicks off the approval process again to the original user to approve.
1. User A recieves approval form - requests a change
2. User B recieves Form - submits that changes have been made
3. User A recieves another approval form - then can approve
I am looking for a way to eliminate step number 3. I want User B to be able to complete the approval when he submits the changes. I tried copying and pasting the approve button from the default infopath view onto the view that UserB
sees, which has a data submit action when the button is clicked. This did not work.
Any ideas would help

Hi,
According to your post, my understanding is that you wanted to add a “request a change” button in the Task Form.
If you can cutomize the task form, I recommend to add button directly and then add conditions and rules to the button.
After you add the “request a change” button, the workflow is similar to the
Multiple Approval Workflow.
Here is a great blog for your reference:
Implementing Workflow using InfoPath 2010 and SharePoint designer 2010
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Creating Globally Reusable 2013 Workflows on SharePoint Designer 2013

I'd like to create a workflow for a list in an application I downloaded from the Office store. The option I have is to create a globally reusable workflow which I can then use on the applications list. How can I create a globally reusable 2013 workflow,
simply, what is the process of creating a globally reusable 2013 workflow on SharePoint designer 2013?

Thanks Margriet, I'm actually using SPD 2013. When I select the "Workflows" node on SPD, I only get List Workflow, Reusable Workflow and Site Workflow options on the ribbon. I tried using Reusable Workflow but it doesn't create one that is "Globally Reusable".
What I'm trying to do is to create a workflow which I can activate for a site collection so I can attache it to a list in an application I downloaded from Office Store. A reusable workflow such as the one I got from the Reusable Workflow option on the ribbon
doesn't work.

Failed to commit objects to server. Error while publishing reports from BW

Hi,
I am getting below error while publishing reports from BW to BO.
"0000000001 Unable to commit the changes to Enterprise. Reason: Failed to commit objects to server : #Duplicate object name in the same folder."
Anyone having any solution for this. Thanks in advance.

Hi Amit
It would be great if you could add a little info about how you solved this issue. Others might run into similar situations - I just did:-(
Thank you:-)

Sorry, we couldn't open...Error opening office documents from SharePoint 2013 in the desktop applications

Sorry, we couldn't open...Error opening office documents from SharePoint 2013 in the desktop applications
One of our Managers encounters the error 'A problem occurred while accessing the Office document cache. Do you want to repair this problem?'
Then When he says yes it give a warning that the cache will be backed up and replaced
Then it says 'A new office document Cache has been created...'
Then it loads this cache with an error
Then After all that the next time he tries to open the document it says is encountered "Sorry, we couldn't open 'URL."
We have Reinstalled office 2013 on the users PC repaired the cache numerous times
Followed -  http://office.microsoft.com/en-gb/word-help/manually-rename-the-office-document-cache-HA101848838.aspx
Updated Lync to 2013 leaving Access as the only office 2010 application (required for legacy systems access)
Repair installed office 2010 and office 2013 again
The SharePoint site has been added to the trusted sites list and the set up assistant run from office 365
And the issue remains the Same all other users including some who also have Access 2010 for legacy systems access have no Issues OS is windows 7 32 Bit browser is IE 9
Office 365 said
Reply by Rachel Zhang MSFT Support
Hi Alex,
From your description, I notice that the issue is related to Office client. We would like to help you, but I’m sorry that our forum does not focus on this scenario and has limited resources regarding it. However, we have a dedicated support forum where
the support engineers will help you with the issues about Office client:
Microsoft Office Community:
http://answers.microsoft.com/en-us/office/forum/office_2013_release?tm=1365567547805
Feel free to sign in to the Office community and click Participate->Ask a Question to post the question with the relevant information.
Microsoft Office Community:
Feel free to sign in to the Office community and click to post the question with the relevant information.
Office team said
Hello Alex,
Thank you for posting your query in Microsoft Office Community.

Check if other excel works fine
Do you have any script\macro in excel file
Check if all application pool on all servers are running
both office and IE should be same build (64 or 32 bit)
what is the error message in ULS log and Event viewer
If this helped you resolve your issue, please mark it Answered

How to restore a site deleted from SharePoint Designer 2010

Hi All,
I have opened a test server site in share point designer 2010, & deleted that particular site in SP designer 2010,can anyone let me know how to restore the site by using SharePoint Designer?
I followed below mentioned procedure to restore the site using SharePoint Designer
Open SharePoint Designer, File tab, Sites under File Tab, Open site, specified the URL of site,opened..
It is getting connected to the Organisation network & showing "path does not exist,check the path and try again".
Whether, Is it possible to restore the site deleted from share point designer in site collection recycle bin. or
Is it possible to copy the site from Production server to test server.
Waiting for an response at the earlier.
Thanks in Advance.
Badri

Hi Badri,
1.You could not restore site deleted from SharePoint designer in site collection, you can only restore the site deleted from
UI in site collection recycle bin, deleted from end user recycle bin.
2.You can export the site from production server, then import it to test server.
http://technet.microsoft.com/en-us/library/ff607895(v=office.14).aspx
Best Regards.
Kelly Chen
TechNet Community Support

How we create workflow using sharepoint designer for first review the documnet than go for approve the document.

Hi to all
I have team site in site collection under this i have Shared Document library. Now i want to create the workflow for the shared Document library. How i will create workflow using sharepoint designer for first review the documnet than go for approve
the document.

Hi ,
According to your description, my understanding is that you want to create a workflow which contains review and approval process.
For implemening your requirement, you can create a workflow containing two steps. The first step is used to collect user information and set workflow variables, and the second step is used to verify whether the reviewer approve. If the reviewers complete
approving, a pproval workflow is started. The whole workflow is like :
More information, please refer to the links below:
http://www.documentmanagementworkflowinfo.com/sharepoint-video-tutorials/create-document-review-workflow-sharepoint-designer-2007.htm
http://office.microsoft.com/en-us/sharepoint-designer-help/watch-this-design-a-document-review-workflow-solution-HA010256417.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Error on publishing workflow from sharepoint designer

Similar Messages

Maybe you are looking for