Error opening the form in Reader 7

I have designed a form in LiveCycle designer 8. The form has a regular Submit button which posts data a URL (a java servlet) using HTTP URL encoded.
The form opens and works as expected in versions 8 and 9. However, when I open the form in 7, I get the following error:
Invalid enumerated value: urlencoded.
The fault occurred on line 105111.
I changed the button to HTTP Submit Button, and it started working fine in Reader 7. Just wondering if there is anything else I need to take care of here.

Hi Vincent,
Thanks a lot. it works now.
Regards
Ganesh

Similar Messages

Opening the form will remove usage rights?

Hi everyone,
I reader extended a form in my trial version. After that, when I try to open the form in livecycle designer, I see a message box saying that
" Some usage rights have been applied to the form you want to open. Opening the form will remove usage rights. Do you want to continue? "
Why is this message appearing? why is it removing the usage rights when I open the form?
Thanks in advance,
kc

I think that there is some confusion on reader extensions. A person/process applies reader extensions rights to a designed form. If you read an existing form into designer and make a change, that constitutes a new form. The reader extensions process had been done on the input. You have to reader-extend the form with the changed design after you save it from designer.
I would expect that you would NOT get a message like this if you opened the form in Reader.
Think of reader extensions like it was a signature. If you change the underlying document, you invalidate the signature. The message box is alerting you to the fact that the redesign process will remove the reader extension rights and you'll have to do the reader extension process again.

TNS error while opening the form in IE 6

Friends,
DB OS: RHEL AS 3 (oracle 9iR2)
OAS OS: RHEL AS 4
Client OS: windows xp sp2
when i try to open the form from windows xp......
it ask me the username/password/database
when i enter....
username: system
password: oradba
database: orcl
its connecting no problem.....but the db connecting is Oracle application Server's 10g db.
but i want to connect the 9i DB
when i give the username/password/database for 9i db like....
username: scott
password: tiger
database: test
its giving me the below error.....
ORA-12514: TNS could not resolve the connect identifier specifiedIn the OAS /u01/app/oracle/product/10.1.2/infrahome/network/admin/tnsnames.ora contains...
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/10.1.2/infrahome/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = appsworld.ncc.com)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = orcl.ncc.com)
test =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.7.2)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = ncc)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = appsworld.ncc.com)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = PLSExtProc)
)Am i have to add any other entry in listener.ora?
please point me where im making mistake.
thanks

Actually....iam opening the form from windows xp.Means what? Are u opening in the browser or in the Forms Builder?
----in the browser
when i create a new form in windows xp using developer suite (i have installed developer suite) i am able to connect the database. i checked the tnsping in server its working.....
This means developer suite has been configured for database.---i configured the developer suite(172.16.7.123) to 9idb(172.16.7.2)
but i am not able to open the form.What error are u getting when u open the form?
---when i open the form in the browser (http://appsworld.ncc.com:7778/forms/frmservlet?config=test)
its asking me the username,password,database.
i gave username=ncc password=nccpwd database=test
In the db server's tnsnames.ora...i have given the db details under test.
if i do "tnsping test" the result is ok. but when i open the form in the browser im getting the ora-12514 error after giving the above said details of username.
But....when i give the username,password and database of infrastructure i.e.,
username=system password=oradba database=orcl then the form is opening in the browser.

Error: ALC-WKS-007-027 when try to open the form after converting its process to short-lived

Hello,
We have converted some of these long-lived processes to short-lived processes since they do not contain "Assign Task". After the converting users start to get the error: "Error occurred during the operation. ID 2547 ALC-WKS-007-027" in Workspace when they try to open to open the form that they have opened before the converting. Clearing cache and history in the users' browser would solve the issue and they were able to open the form but that have to be done by each user and it becomes time consuming. Beside the error above from the users' Workspace, we also see the below errors in the log file, can any one please advise what should be done rather than each user have to clean the cache and history in their browser.
Root cause: com.adobe.idp.taskmanager.dsc.client.endpoint.TaskEndpointNotFound: Endpoint for ID: 2551 not found
at com.adobe.idp.taskmanager.dsc.service.TaskEndpointManagerImpl.invokeEndpoint(TaskEndpoint ManagerImpl.java:364)
at com.adobe.idp.taskmanager.dsc.service.TaskEndpointManagerImpl.invokeEndpoint(TaskEndpoint ManagerImpl.java:323)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:64)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:615)
at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:118)
at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:140)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.execute(EjbTr ansactionCMTAdapterBean.java:342)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.doSupports(Ej bTransactionCMTAdapterBean.java:212)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EJSLocalStatelessEjbTransactionCMTAdapter_ caf58c4f.doSupports(Unknown Source)
at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:104)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept(InvocationStra tegyInterceptor.java:55)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:109)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:115)
at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:118)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage(AbstractMessage Receiver.java:91)
at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessageDispatcher.java:18 8)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:57)
at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
at com.adobe.idp.taskmanager.dsc.client.endpoint.TaskEndpointClientImpl.invokeEndpoint(TaskE ndpointClientImpl.java:227)
at com.adobe.workspace.endpoints.EndpointActions.invokeEndpoint(EndpointActions.java:100)
at com.adobe.workspace.endpoints.EndpointActions.invoke(EndpointActions.java:61)
at sun.reflect.GeneratedMethodAccessor387.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:615)
at flex.messaging.services.remoting.adapters.JavaAdapter.invoke(JavaAdapter.java:421)
at flex.messaging.services.RemotingService.serviceMessage(RemotingService.java:183)
at flex.messaging.MessageBroker.routeMessageToService(MessageBroker.java:1495)
at flex.messaging.endpoints.AbstractEndpoint.serviceMessage(AbstractEndpoint.java:882)
at flex.messaging.endpoints.amf.MessageBrokerFilter.invoke(MessageBrokerFilter.java:121)
at flex.messaging.endpoints.amf.LegacyFilter.invoke(LegacyFilter.java:158)
at flex.messaging.endpoints.amf.SessionFilter.invoke(SessionFilter.java:44)
at flex.messaging.endpoints.amf.BatchProcessFilter.invoke(BatchProcessFilter.java:67)
at flex.messaging.endpoints.amf.SerializationFilter.invoke(SerializationFilter.java:146)
at flex.messaging.endpoints.BaseHTTPEndpoint.service(BaseHTTPEndpoint.java:278)
at flex.messaging.MessageBrokerServlet.service(MessageBrokerServlet.java:315)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1146)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1087)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:145)
at com.adobe.workspace.events.RemoteEventClientLifeCycle.doFilter(RemoteEventClientLifeCycle .java:150)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java: 190)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:87)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:848)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:691)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:588)
at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:525)
at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.jav a:90)
at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:764)
at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1478)
at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:133)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink .java:458)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink .java:387)
at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.jav a:102)
at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionLi stener.java:165)
at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:196)
at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:751)
at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:881)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1497)
Thanks in advance,
Han Dao

Hi Jasmin,
Will "Reset Cache" in the AdminUI help to stop those errors that keep appearing in the log file and/or on the workspace? We receive more and more complaint about that issues while clearing cache on their browser is not a good solution for them. Please advise.
Thanks,
Han Dao

After 11.5.10.2 Upgrade, error coming when open the form.

Hi Experts,
After upgrading application from 11.5.8 to 11.5.10.2(successfully applied u3480000.drv),
when try to open the form it gives error like
"Illegal Constant pool type", when applet loading,
I tried to open the form like
http://hostname.domainname://port/dev60cgi/f60cgi/
still im getting the same error, i cant able to open the forms,
Apache Error log says like
"Client denied by server configuration"
Please advice me to solve this issue.
Thanks
R.Sundaravel

Hi,
Please verify that you have no invalid objects.
"Illegal Constant pool type", when applet loading, Clear the server cache, bounce the services and check again.
Apache Error log says like
"Client denied by server configuration"Review this document and see if it helps.
Note: 748228.1 - Unable to Login. Page Can Not be Found Error When Connecting Via Appslogin
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=748228.1
Regards,
Hussein

Facing Problem While Opening the Form Builder 10g

Hi Experts,
I am Facing below Error while opening one of the developed forms in the form builder 10g. Operating system of my laptop is Window 7.
Oracle Forms Designer Has stopped Working
Windows can check online for a solution to the problem.
---> Check online for a solution and close the program
----> close the program
Please provide any tips or solutions to resolve above Error.
Thanks in advance

Meher Irk wrote:
Hi Experts,
I am Facing below Error while opening one of the developed forms in the form builder 10g. Operating system of my laptop is Window 7.
Oracle Forms Designer Has stopped Working
Windows can check online for a solution to the problem.
---> Check online for a solution and close the program
----> close the program
Try this..
Open form builder.
Make connection with database.
Now open the form.
Hope this works..

Error opening Oracle Form 5.0

Hi,
When I open one of the FMB file, I got the following error and then not able to open the FMB form up.
1. FRM-91010: Module_Access parameter must be FILE or DATABASE
2. usage: f50des32 module=<name> userid=<userid/password>[parameter]
3. optional parameter are (default values given)
4. Module_Type=FORM module type(FORM, MENU, LIBRARY)
May I know how to resolve this problem?
Thanks,
Peggy

I've never seen this error, but the message seems to indicate that the module or form f50des32 has some database logon parameter that is invalid:
userid=<userid/password>[parameter]
Try opening the form using Form Builder 5, and look for a database logon.

You are not authorized to open the form ORA-01403: no data found

Hi,
I have created a new Oracle 10g forms. It compiles sucessfully but when it is opened it gives a error message : You are not authorized to open the form ORA-01403: no data found.
I am already connected to database. Can anyone please help what is the reason for this issue and any possible resolution?

Sounds like you have some kind of security enabled. However, because you didn't share the details about your environment or what you are doing there isn't much we can do is guess.
Exactly which Forms version are you using?
Exactly which database version are you using?
Are you using anything like Oracle E-Business (e.g. template.fmb)?
Did you create the form with Oracle Designer?
If you create a simple form using only the DataBlock and Layout Wizards against the Oracle demo schema (SCOTT), does this form run?
Any additional details outlining what you are doing or have already done might be helpful.

TS2518 Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the

Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?

Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue.

"There was an error opening the database for the library "~/Pictures/Apert"

Hey everyone,
There's already another discussion thread about this at the link below, but the problem was never actually resolved. http://discussions.apple.com/thread.jspa?threadID=2343014&tstart=0&messageID=116 67261#11667261
So I stumbled across this problem where Aperture 3 will display the following error when opening the image library.
There was an error opening the database for the library “~[path]/Aperture Library.aplibrary”.
One user suggested navigating to the actual library, and ⌘⌥-clicking the library to open it with the Aperture Library First Aid dialog. This however, did not work for me. I still received the error messages upon ⌘⌥-clicking the library.
Here's a little hack I discovered for those of you still struggling. It doesn't fix the problem (leaves quite a large dent remaining actually), but hopefully someone can cultivate what little I discovered.
⌥-click Aperture (not the library)
You should get to the library selection dialog box. Create a new library (bottom right corner) and remember the location of the new library. Put a few random pictures in the new one.
Close Aperture
⌃-click both the old and new libraries and "Show Package Contents."
Open the folder "Database" in both libraries.
Cross check the folders to see if the old library is missing files that are in the new library. If your old library is missing some files (mine was), drag the missing files from the new library to the old one.
Close both folders.
⌘⌥-click the old library.
NOW, I got the Aperture Library First Aid dialog.
Rebuild the library (3rd option)
Wait a while.
Aperture should open up with a folder named "Recovered Folder." Within this folder will be a SINGLE project named "Recovered Project" with ALL the images from your old library. There may be a few albums there too, but mine were all empty so it didn't matter in my case. To my knowledge, I lost all the adjustments I performed too.
This is as far as I got. I have much of my library backed up, so I only needed to copy the most recent photos into the backup. I am NOT reorganizing and re-editing pictures in this one!
As Aperture is a photo-organizing and photo-editing software, I understand that this by no means fixes the problem, since you lose all organization and editing. But it enables one to at least view the images lost. Hopefully a more knowledgable hacker else can figure out how to fix this completely. Unfortunately, I simply don't have the time to continue messing with this.
Good luck to anyone else having issues! I understand the frustration you must be facing, its freaky having years worth of images simply disappear! After this incident, I'm definitely going to configure Time Machine to perform more frequent backups, since my latest backup was already a couple weeks old.

Hey All,
To my horror I have a similar problem and your solution didn't seem to help. To be specific, I get the error:
"There was an error opening the database for the library “~/Pictures/Aperture Library_2.aplibrary" Everytime I try to run Aperture. This happened because my Apple computer shut off completely (due to bad battery) while importing photos from a memory card.
I've tried "option + command" while clicking the aperture application and that gave me the same error message without any other option except to quit the program. I tried "option + command" and clicked the library package but that didn't work either. I tried creating a new aperture library, opening it which I did successfully, and then switching to my main one but that didn't work.
Does anyone know away to get it to work again and have the edits still there?
I'm a professional photographer and have thousands of photos or so in the library so this is distressing. The master files for the photos are located on an external hard drive, but I'm not sure how to access them in aperture. Are all the edits on the photographs are in the external hard drive or the aperture library. Is there any other way to resolve this issue without losing the edits?
Does apple have a support number I can call? Any help would be greatly appreciated!!

This item cannot be displayed in the Reading Pane. Open the item to read its contents Outlook 2013

One of Outlook 2013 of Office Home and Business in Windows 7 Pro 64bit who is connecting to a local Exchange 2010 server is having the following error:
This item cannot be displayed in the Reading Pane. Open the item to read its contents.
When launching Outlook, it seems work fine. If user click other folders and click Inbox again. The error comes out. It only happens on Inbox folder.
I have tried the followings with no luck.
1. Rebuilt new Outlook profile.
2. Rebuilt new Windows profile + Outlook profile.
3. Disabled all add-ins.
There are 2 ways I can make it work.
1. I disabled "Cache Mode", then it starts working well.
2. Start Outlook with outlook.com /safe.
So the question is why in Cache mode, Outlook 2013 cannot display the item in reading pane.
Any hint will be appreciated.
CliffZ

CliffZ,
One hint: Do an offline virus scan on the affected computer:
1. Check if your computer has a 32- or a 64-bit system. Right-click on Computer icon, choose Properties. System type reveals the bitness.
2. Download the appropriate virus scanning version from http://windows.microsoft.com/en-US/windows/what-is-windows-defender-offline
Note: If you're on Windows 8.1: http://windows.microsoft.com/en-us/windows/what-is-windows-defender-offline-beta
3. Insert a USB stick with nothing important on. Observe the drive letter (F:, G: etc ...) assigned to it.
4. Start the downloaded program and follow the instructions. Note: Choose the correct drive letter from 3 above.
5. Restart your computer so it will boot from the USB stick. Depending on computer brand you can often press F12 to get a boot menu.
Sometimes you have to enter BIOS to tell the computer to boot from USB if present.
The quick scan starts. Abort it and select Full Scan.
Let it run overnight.
Regards Pete

When I try to open a pdf file I get an error message stating "There was an error opening the document. The file is damaged and could not be repaired." Other pdf files open fine.

When I try to open a pdf file I get an error message stating "There was an error opening the document. The file is damaged and could not be repaired." Other pdf files open fine.

You need to get a new copy of the PDF.

With a PDF Dynamic form using show/hide actions, how to ensure that when the completed form is saved, closed and re-opened, the form still show the fields as before it was closed?

With a PDF Dynamic form using show/hide actions, how to ensure that when the completed form is saved, closed and re-opened, the form still show the fields as before it was closed?
I have developed a form with fields hidden by default, that become visible based on box ticked or radio button selections.
My problem is that, when I close the form and re-open it, it comes back to it's default presentation, regardless of the information already recorded in the form (including in the now hidden fields.
How to correct that
Thanks in advance for any hint you can provide.

I've had the same problem. This solved it...
Go to the "Form properties..." in the File-menu. Select "Run-time" to the left and in the box "Scripting" Preserve scripting changes to form when saved: choose Automatically (Script-based state changes are saved locally in an insecure fashion. This option cannot be used for certified forms).
Hope it works for you to...

Error message "There was an error opening the database for the library"

I am getting the following error when I try to open my Aperture today: "There was an error opening the database for the library “/Users/xyz/Pictures/Aperture Trial Library.aplibrary”".
I tried doing Option-Cmd while double clicking Aperture, but I can't get to the restore screen. I also tried to use Time Machine to restore the library and am still getting the error. Is there a different way to get to the restore screen??

Someone posted in another thread that they needed to create a new library and import the old one in.

Error with Adobe Acrobat X "error opening the document. The file is damaged and could not recover"

Good morning,
I have a problem when generating PDF files with Adobe Acrobat X.
When I give print a Word document 2003 ... 2007 ... 2010 ... and select a network drive to save the PDF file, I get the following error "error opening the document. Thefile is damaged and not could recover."
The file is saved on your drive well ... but I always get this error.
Any ideas???
Thank you.

First of all thanks for responding.
The installed version of Adobe's Adobe OS X and Windows XP machines is thelatest patch level.
The local system .... works well ... Open Office 2010 ... create a new Word document and save it locally ... and all good.
The problem is though that same machine ... it enters network (not Windows network. OES2 is a network with Novell network client) ... and to open and create a new document to WORD .... when printing the PDF printer ... select a network drive... and when the document is saved well ... but it shows the error.
I have an amount of hours lost with this ... I hope you can help me find a solution.
Thank you very much.

Error opening the form in Reader 7

Similar Messages

Maybe you are looking for