Error ORA-07217 starting Oracle9i
Having tried to use Oracle on WindowsMe..., I am now trying RedHat Linux 7.3. I have tried installing Oracle9i standard edition. I had one error during installation which meant the Database Configuration Assistant did not run properly. When I try to run sqlplus and enter the scott/tiger username and password I get the following error:
ORA-07217: sltln: environment variable cannot be evaluated.
As I am new to Linux and Oracle I do not understand what this means. Any information/solutions to this problem would be greatly apprectiated
Thanks
Mike
Check $ORACLE_HOME/dbs. I noticed that the installer didn't create the init<ORACLE_SID>.ora during the installation.
If init<ORACLE_SID>.ora is not in the directory, make a copy from init.ora to init<ORACLE_SID>.ora (e.g your ORACLE_SID name is "test", #cp init.ora inittest.ora). Hope this help.
Similar Messages
-
Error ORA-20100 : Start of root element expected
I have been trying to check xml in clobs by using Steve's book CheckXMLinClob procedure. I used that procedure in a valid xml file ('claim77804.xml') and this keeps coming up.
ThanksWould you post your PL/SQL code? This error is normally caused by non-valid XML input which can not be recognized by XML parser.
-
Ora-01031 error while starting oracle9i server on linux advanced redhat 3.1
I am encountering some errors while trying to start the oracle9i database on linux server.
I am getting the error ora-01031 while trying to connect to the server as sysdba.
I give the following commands
sqlplus /nolog
Sql> conn sys/xxxx as sysdba
ERROR:
ORA-01031: insufficient privileges
The listener service is started. The user "oracle" belongs to the groups oinstall and dba on linux.
When I try to connect to the sys account through enterprise manager console, it connects.
But when I try to start the database it says
ERROR:
ORA-01031: insufficient privileges
I am trying to solve this problem since the past two days but to no avail.
The last time the database was used it was not shutdown properly (we had rebooted the linux server through command prompt).
Might be this has caused some problem.
I would be very grateful to you if you could spare some time and look into this problem.Listen Sheikh Abdullah, if u don't need remote access to that server over secure conn., don't use password file authentification but change REMOTE_LOGIN_PASSWORDFILE to NONE and when u conn thru OEM as sysdba try to change his pass and then try conn thru command promt(CP) usin that new pass.
Or recreate pass file adding new pass in it, set REMOTE_LOGIN_PASSWORDFILE to exclusive or shared and conn thru CP using password file pass.
Try this possible solutions in order u wish. -
Oracle9i Start Error: ORA-1031
Whenever I started Oracle9i in window98, it ask for a username and password. I have tried all the standard user (i.e. sys/sysdba, scott/tiger, system/manager) but nothing works and the error ORA-1031 appear.
The most probable reason is you are not logged into your machine as the administrator of the machine (or as the user who installed Oracle). You do not have sufficient privileges to start and stop the Oracle.
Log in as administrator and try to connect as :
/ as sysdba
If you still get the error, refer for tips at this url to
solve the problem
http://home.clara.net/dwotton/dba/ora1031.htm
Chandar -
Starting Oracle 11gr2 Im getting Error: ORA-03135: connection lost contact
Hi Guys!
Thanks for your advises. I still working toward a resolution.
But I encountered another issue from Enterp Manager :
ERROR : Please correct the following error: Connection string must be specified.
My connection has this format:
//using connection string attributes to connect to Oracle Database
con.ConnectionString = "User Id=scott;Password=tiger;Data Source=oracle";
con.Open();
Console.WriteLine("Connected to Oracle" + con.ServerVersion);
Please tell me what is wrong here. Thanks. Dan.
Hi all !
I need help please for resolving the following :
Problem:
Im having frequent disconnection after abnormal shutdown due to power failure.
starting Oracle 11gr2 Im getting Error: ORA-03135: connection lost contact
Im on Laptop running Linux Centos 6.3 Host.
and Im running Oracle 11gr2 on Oracle Enterprise Linux in VMware (Guest).
When attempting login from the Oracle Enterprise Manager Database Control
I got Error: "Your username and/or password are invalid."
The alert.log is at the bottom
[test@localhost ~]$ xhost +
access control disabled, clients can connect from any host
[test@localhost ~]$
[test@localhost ~]$ su - root
Password:
[root@localhost ~]#
[root@localhost ~]# su - oracle
[oracle@localhost ~]$
[oracle@localhost ~]$ export ORACLE_SID=db11gr2
[oracle@localhost ~]$
[oracle@localhost ~]$ echo $ORACLE_HOME
/u01/app/oracle/product/11.2.0/db_1
[oracle@localhost ~]$
[oracle@localhost ~]$ echo $ORACLE_BASE
/u01/app/oracle
[oracle@localhost ~]$
[oracle@localhost ~]$ echo $ORACLE_SID
db11gr2
[oracle@localhost ~]$
[oracle@localhost ~]$ lsnrctl start
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 04-DEC-2013 12:23:07
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Starting /u01/app/oracle/product/11.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost.localdomain)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 04-DEC-2013 12:23:08
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "db11gr2" has 1 instance(s).
Instance "db11gr2", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@localhost ~]$
[oracle@localhost ~]$ emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
https://localhost.localdomain:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ............... started.
Logs are generated in directory /u01/app/oracle/product/11.2.0/db_1/localhost.localdomain_db11gr2/sysman/log
[oracle@localhost ~]$
[oracle@localhost ~]$ sqlplus "/as sysdba"
SQL*Plus: Release 11.2.0.1.0 Production on Wed Dec 4 12:26:38 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> shutdown abort;
ORACLE instance shut down.
SQL>
SQL> startup;
ORACLE instance started.
Total System Global Area 799313920 bytes
Fixed Size 1339484 bytes
Variable Size 318771108 bytes
Database Buffers 473956352 bytes
Redo Buffers 5246976 bytes
Database mounted.
ORA-00600: internal error code, arguments: [4194], [: no
SQL> startup;
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL>
SQL>
SQL> quit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@localhost ~]$
[oracle@localhost ~]$ sqlplus "/as sysdba"
SQL*Plus: Release 11.2.0.1.0 Production on Wed Dec 4 12:59:23 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup;
ORACLE instance started.
Total System Global Area 799313920 bytes
Fixed Size 1339484 bytes
Variable Size 318771108 bytes
Database Buffers 473956352 bytes
Redo Buffers 5246976 bytes
Database mounted.
Database opened.
SQL>
SQL>
ERROR at line 1:
ORA-03135: connection lost contact
Process ID: 8973
Session ID: 1 Serial number: 5
SQL> startup;
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL>
SQL> quit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@localhost ~]$
[oracle@localhost ~]$ sqlplus "/as sysdba"
SQL*Plus: Release 11.2.0.1.0 Production on Wed Dec 4 13:12:03 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup;
ORACLE instance started.
Total System Global Area 799313920 bytes
Fixed Size 1339484 bytes
Variable Size 318771108 bytes
Database Buffers 473956352 bytes
Redo Buffers 5246976 bytes
Database mounted.
Database opened.
SQL>
SQL> select STATUS, DATABASE_STATUS from v$instance;
STATUS DATABASE_STATUS
OPEN ACTIVE
SQL>
SQL> SELECT * FROM v$instance;
ERROR:
ORA-03114: not connected to ORACLE
[oracle@localhost ~]$
[oracle@localhost ~]$ sqlplus "/as sysdba"
SQL*Plus: Release 11.2.0.1.0 Production on Wed Dec 4 13:17:37 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup;
ORACLE instance started.
Total System Global Area 799313920 bytes
Fixed Size 1339484 bytes
Variable Size 318771108 bytes
Database Buffers 473956352 bytes
Redo Buffers 5246976 bytes
Database mounted.
Database opened.
SQL>
SQL> SELECT * FROM v$instance;
INSTANCE_NUMBER INSTANCE_NAME
HOST_NAME
VERSION STARTUP_T STATUS PAR THREAD# ARCHIVE LOG_SWITCH_WAIT
LOGINS SHU DATABASE_STATUS INSTANCE_ROLE ACTIVE_ST BLO
1 db11gr2
localhost.localdomain
11.2.0.1.0 04-DEC-13 OPEN NO 1 STOPPED
ALLOWED NO ACTIVE PRIMARY_INSTANCE NORMAL NO
SQL>
alert log file
[oracle@localhost ~]$
[oracle@localhost ~]$ adrci
ADRCI: Release 11.2.0.1.0 - Production on Wed Dec 4 17:09:47 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
ADR base = "/u01/app/oracle"
adrci> set editor emacs
adrci> show alert
Choose the alert log from the following homes to view:
1: diag/rdbms/unknown/DB11G
2: diag/rdbms/db11gr2/db11gr2
3: diag/tnslsnr/localhost/listener
Q: to quit
Please select option: 2
*** glibc detected *** adrci: malloc(): memory corruption: 0x09de7160 ***
======= Backtrace: =========
/lib/libc.so.6[0x1d42dd]
/lib/libc.so.6(__libc_malloc+0x67)[0x1d5e97]
/lib/ld-linux.so.2[0x331f8a]
/lib/ld-linux.so.2[0x33215a]
/lib/ld-linux.so.2[0x32e3ce]
/lib/libc.so.6[0x272550]
/lib/libc.so.6(_dl_sym+0x1a)[0x2728fa]
/lib/libdl.so.2[0x110e08]
/lib/ld-linux.so.2[0x331e66]
/lib/libdl.so.2[0x1112cc]
/lib/libdl.so.2(dlsym+0x63)[0x110d93]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(sskgds_save_text_start_end+0x47)[0xa0fb37]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(skgdsinit+0xb7)[0xa0a909]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x15edea8]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(kgdsdsts+0x26)[0x15ef8c2]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgemdGetCallStackWFlag+0x102)[0x198961a]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgemdGetCallStack+0x2d)[0x198950d]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x1989250]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgemdFillIncCtx+0x72)[0x1989088]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgexPopulateIncCtx+0x67)[0x1994d25]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgexProcessError+0x75)[0x1996437]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x19601c5]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgePostErrorDirect+0x650)[0x1960b3c]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x1c58fb6]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x183c44e]
[0x3bb440]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x1cf7966]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgrlrReadAlertMsg+0x562)[0x1cf7126]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgrxae_alert_ext+0x2d4)[0xbbcf44]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0xb9f25c]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgrmqmf_fetch_real+0x23f)[0xb9bc1f]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgrmqmf_fetch+0xee)[0xb9b520]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0xb53c3e]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgrip_relation_iterator+0x16c)[0xb531bc]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgripricm_rltniter_wcbf_mt+0x1f7)[0xb52709]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgripritc_rltniter_wcbf+0xe6)[0xb585f2]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgvm_query+0x3f2)[0x1abe62c]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgvm_query_wcmd+0x36f)[0x1abf053]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x1c3e116]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x1c3f5b7]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x1c4e2ae]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgvciec_exec_cmd+0x4a2)[0x1c4d640]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgvci_main_int+0x43b)[0x1c59e61]
adrci[0x8048c5b]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(lpmcall+0x363)[0x1496ec3]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(lpmpmai+0x15c)[0x1497904]
adrci[0x8048aa5]
/lib/libc.so.6(__libc_start_main+0xdc)[0x17fe9c]
adrci[0x8048811]
======= Memory map: ========
00110000-00112000 r-xp 00000000 08:03 5925240 /lib/libdl-2.5.so
00112000-00113000 r-xp 00001000 08:03 5925240 /lib/libdl-2.5.so
00113000-00114000 rwxp 00002000 08:03 5925240 /lib/libdl-2.5.so
00114000-00139000 r-xp 00000000 08:03 5925284 /lib/libm-2.5.so
00139000-0013a000 r-xp 00024000 08:03 5925284 /lib/libm-2.5.so
0013a000-0013b000 rwxp 00025000 08:03 5925284 /lib/libm-2.5.so
0013b000-0014f000 r-xp 00000000 08:03 5925246 /lib/libpthread-2.5.so
0014f000-00150000 r-xp 00013000 08:03 5925246 /lib/libpthread-2.5.so
00150000-00151000 rwxp 00014000 08:03 5925246 /lib/libpthread-2.5.so
00151000-00153000 rwxp 00151000 00:00 0
00153000-00166000 r-xp 00000000 08:03 5925301 /lib/libnsl-2.5.so
00166000-00167000 r-xp 00012000 08:03 5925301 /lib/libnsl-2.5.so
00167000-00168000 rwxp 00013000 08:03 5925301 /lib/libnsl-2.5.so
00168000-0016a000 rwxp 00168000 00:00 0
0016a000-002a9000 r-xp 00000000 08:03 5925233 /lib/libc-2.5.so
002a9000-002aa000 --xp 0013f000 08:03 5925233 /lib/libc-2.5.so
002aa000-002ac000 r-xp 0013f000 08:03 5925233 /lib/libc-2.5.so
002ac000-002ad000 rwxp 00141000 08:03 5925233 /lib/libc-2.5.so
002ad000-002b0000 rwxp 002ad000 00:00 0
002b0000-002b1000 r-xp 00000000 08:03 3905250 /usr/lib/libaio.so.1.0.1
002b1000-002b2000 rwxp 00000000 08:03 3905250 /usr/lib/libaio.so.1.0.1
002b2000-002bb000 r-xp 00000000 08:03 5925256 /lib/libnss_files-2.5.so
002bb000-002bc000 r-xp 00008000 08:03 5925256 /lib/libnss_files-2.5.so
002bc000-002bd000 rwxp 00009000 08:03 5925256 /lib/libnss_files-2.5.so
002bd000-002c8000 r-xp 00000000 08:03 5925425 /lib/libgcc_s-4.1.2-20080825.so.1
002c8000-002c9000 rwxp 0000a000 08:03 5925425 /lib/libgcc_s-4.1.2-20080825.so.1
00324000-0033e000 r-xp 00000000 08:03 5925219 /lib/ld-2.5.so
0033e000-0033f000 r-xp 00019000 08:03 5925219 /lib/ld-2.5.so
0033f000-00340000 rwxp 0001a000 08:03 5925219 /lib/ld-2.5.so
003bb000-003bc000 r-xp 003bb000 00:00 0 [vdso]
003bc000-01fc3000 r-xp 00000000 08:03 4984633 /u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1
01fc3000-020a7000 rwxp 01c07000 08:03 4984633 /u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1
020a7000-020c1000 rwxp 020a7000 00:00 0
025b1000-027ce000 r-xp 00000000 08:03 5006042 /u01/app/oracle/product/11.2.0/db_1/lib/libnnz11.so
027ce000-027fc000 rwxp 0021d000 08:03 5006042 /u01/app/oracle/product/11.2.0/db_1/lib/libnnz11.so
027fc000-027fe000 rwxp 027fc000 00:00 0
08048000-08049000 r-xp 00000000 08:03 1407670 /u01/app/oracle/product/11.2.0/db_1/bin/adrci
08049000-0804a000 rw-p 00000000 08:03 1407670 /u01/app/oracle/product/11.2.0/db_1/bin/adrci
09d62000-09e0d000 rw-p 09d62000 00:00 0 [heap]
b7e00000-b7e21000 rw-p b7e00000 00:00 0
b7e21000-b7f00000 ---p b7e21000 00:00 0
b7f68000-b7f90000 rw-p b7f68000 00:00 0
bfc54000-bfc6d000 rwxp bffe5000 00:00 0 [stack]
bfc6d000-bfc6e000 rw-p bfffe000 00:00 0
starting Oracle 11gr2 Im getting Error: ORA-03135: connection lost contact
Im on Laptop running Linux Centos 6.3 Host.
and Im running Oracle 11gr2 on Oracle Enterprise Linux in VMware (Guest).
Im having frequent disconnection after abnormal shutdown due to power failure.
When attempting login from the Oracle Enterprise Manager Database Control
I got Error: "Your username and/or password are invalid."
[test@localhost ~]$ xhost +
access control disabled, clients can connect from any host
[test@localhost ~]$
[test@localhost ~]$ su - root
Password:
[root@localhost ~]#
[root@localhost ~]# su - oracle
[oracle@localhost ~]$
[oracle@localhost ~]$ export ORACLE_SID=db11gr2
[oracle@localhost ~]$
[oracle@localhost ~]$ echo $ORACLE_HOME
/u01/app/oracle/product/11.2.0/db_1
[oracle@localhost ~]$
[oracle@localhost ~]$ echo $ORACLE_BASE
/u01/app/oracle
[oracle@localhost ~]$
[oracle@localhost ~]$ echo $ORACLE_SID
db11gr2
[oracle@localhost ~]$
[oracle@localhost ~]$ lsnrctl start
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 04-DEC-2013 12:23:07
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Starting /u01/app/oracle/product/11.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost.localdomain)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 04-DEC-2013 12:23:08
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "db11gr2" has 1 instance(s).
Instance "db11gr2", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@localhost ~]$
[oracle@localhost ~]$ emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
https://localhost.localdomain:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ............... started.
Logs are generated in directory /u01/app/oracle/product/11.2.0/db_1/localhost.localdomain_db11gr2/sysman/log
[oracle@localhost ~]$
[oracle@localhost ~]$ sqlplus "/as sysdba"
SQL*Plus: Release 11.2.0.1.0 Production on Wed Dec 4 12:26:38 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> shutdown abort;
ORACLE instance shut down.
SQL>
SQL> startup;
ORACLE instance started.
Total System Global Area 799313920 bytes
Fixed Size 1339484 bytes
Variable Size 318771108 bytes
Database Buffers 473956352 bytes
Redo Buffers 5246976 bytes
Database mounted.
ORA-00600: internal error code, arguments: [4194], [: no
SQL> startup;
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL>
SQL>
SQL> quit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@localhost ~]$
[oracle@localhost ~]$ sqlplus "/as sysdba"
SQL*Plus: Release 11.2.0.1.0 Production on Wed Dec 4 12:59:23 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup;
ORACLE instance started.
Total System Global Area 799313920 bytes
Fixed Size 1339484 bytes
Variable Size 318771108 bytes
Database Buffers 473956352 bytes
Redo Buffers 5246976 bytes
Database mounted.
Database opened.
SQL>
SQL>
ERROR at line 1:
ORA-03135: connection lost contact
Process ID: 8973
Session ID: 1 Serial number: 5
SQL> startup;
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL>
SQL> quit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@localhost ~]$
[oracle@localhost ~]$ sqlplus "/as sysdba"
SQL*Plus: Release 11.2.0.1.0 Production on Wed Dec 4 13:12:03 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup;
ORACLE instance started.
Total System Global Area 799313920 bytes
Fixed Size 1339484 bytes
Variable Size 318771108 bytes
Database Buffers 473956352 bytes
Redo Buffers 5246976 bytes
Database mounted.
Database opened.
SQL>
SQL> select STATUS, DATABASE_STATUS from v$instance;
STATUS DATABASE_STATUS
OPEN ACTIVE
SQL>
SQL> SELECT * FROM v$instance;
ERROR:
ORA-03114: not connected to ORACLE
[oracle@localhost ~]$
[oracle@localhost ~]$ sqlplus "/as sysdba"
SQL*Plus: Release 11.2.0.1.0 Production on Wed Dec 4 13:17:37 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup;
ORACLE instance started.
Total System Global Area 799313920 bytes
Fixed Size 1339484 bytes
Variable Size 318771108 bytes
Database Buffers 473956352 bytes
Redo Buffers 5246976 bytes
Database mounted.
Database opened.
SQL>
SQL> SELECT * FROM v$instance;
INSTANCE_NUMBER INSTANCE_NAME
HOST_NAME
VERSION STARTUP_T STATUS PAR THREAD# ARCHIVE LOG_SWITCH_WAIT
LOGINS SHU DATABASE_STATUS INSTANCE_ROLE ACTIVE_ST BLO
1 db11gr2
localhost.localdomain
11.2.0.1.0 04-DEC-13 OPEN NO 1 STOPPED
ALLOWED NO ACTIVE PRIMARY_INSTANCE NORMAL NO
SQL>
alert log file
[oracle@localhost ~]$
[oracle@localhost ~]$ adrci
ADRCI: Release 11.2.0.1.0 - Production on Wed Dec 4 17:09:47 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
ADR base = "/u01/app/oracle"
adrci> set editor emacs
adrci> show alert
Choose the alert log from the following homes to view:
1: diag/rdbms/unknown/DB11G
2: diag/rdbms/db11gr2/db11gr2
3: diag/tnslsnr/localhost/listener
Q: to quit
Please select option: 2
*** glibc detected *** adrci: malloc(): memory corruption: 0x09de7160 ***
======= Backtrace: =========
/lib/libc.so.6[0x1d42dd]
/lib/libc.so.6(__libc_malloc+0x67)[0x1d5e97]
/lib/ld-linux.so.2[0x331f8a]
/lib/ld-linux.so.2[0x33215a]
/lib/ld-linux.so.2[0x32e3ce]
/lib/libc.so.6[0x272550]
/lib/libc.so.6(_dl_sym+0x1a)[0x2728fa]
/lib/libdl.so.2[0x110e08]
/lib/ld-linux.so.2[0x331e66]
/lib/libdl.so.2[0x1112cc]
/lib/libdl.so.2(dlsym+0x63)[0x110d93]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(sskgds_save_text_start_end+0x47)[0xa0fb37]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(skgdsinit+0xb7)[0xa0a909]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x15edea8]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(kgdsdsts+0x26)[0x15ef8c2]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgemdGetCallStackWFlag+0x102)[0x198961a]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgemdGetCallStack+0x2d)[0x198950d]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x1989250]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgemdFillIncCtx+0x72)[0x1989088]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgexPopulateIncCtx+0x67)[0x1994d25]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgexProcessError+0x75)[0x1996437]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x19601c5]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgePostErrorDirect+0x650)[0x1960b3c]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x1c58fb6]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x183c44e]
[0x3bb440]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x1cf7966]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgrlrReadAlertMsg+0x562)[0x1cf7126]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgrxae_alert_ext+0x2d4)[0xbbcf44]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0xb9f25c]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgrmqmf_fetch_real+0x23f)[0xb9bc1f]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgrmqmf_fetch+0xee)[0xb9b520]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0xb53c3e]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgrip_relation_iterator+0x16c)[0xb531bc]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgripricm_rltniter_wcbf_mt+0x1f7)[0xb52709]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgripritc_rltniter_wcbf+0xe6)[0xb585f2]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgvm_query+0x3f2)[0x1abe62c]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgvm_query_wcmd+0x36f)[0x1abf053]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x1c3e116]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x1c3f5b7]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x1c4e2ae]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgvciec_exec_cmd+0x4a2)[0x1c4d640]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgvci_main_int+0x43b)[0x1c59e61]
adrci[0x8048c5b]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(lpmcall+0x363)[0x1496ec3]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(lpmpmai+0x15c)[0x1497904]
adrci[0x8048aa5]
/lib/libc.so.6(__libc_start_main+0xdc)[0x17fe9c]
adrci[0x8048811]
======= Memory map: ========
00110000-00112000 r-xp 00000000 08:03 5925240 /lib/libdl-2.5.so
00112000-00113000 r-xp 00001000 08:03 5925240 /lib/libdl-2.5.so
00113000-00114000 rwxp 00002000 08:03 5925240 /lib/libdl-2.5.so
00114000-00139000 r-xp 00000000 08:03 5925284 /lib/libm-2.5.so
00139000-0013a000 r-xp 00024000 08:03 5925284 /lib/libm-2.5.so
0013a000-0013b000 rwxp 00025000 08:03 5925284 /lib/libm-2.5.so
0013b000-0014f000 r-xp 00000000 08:03 5925246 /lib/libpthread-2.5.so
0014f000-00150000 r-xp 00013000 08:03 5925246 /lib/libpthread-2.5.so
00150000-00151000 rwxp 00014000 08:03 5925246 /lib/libpthread-2.5.so
00151000-00153000 rwxp 00151000 00:00 0
00153000-00166000 r-xp 00000000 08:03 5925301 /lib/libnsl-2.5.so
00166000-00167000 r-xp 00012000 08:03 5925301 /lib/libnsl-2.5.so
00167000-00168000 rwxp 00013000 08:03 5925301 /lib/libnsl-2.5.so
00168000-0016a000 rwxp 00168000 00:00 0
0016a000-002a9000 r-xp 00000000 08:03 5925233 /lib/libc-2.5.so
002a9000-002aa000 --xp 0013f000 08:03 5925233 /lib/libc-2.5.so
002aa000-002ac000 r-xp 0013f000 08:03 5925233 /lib/libc-2.5.so
002ac000-002ad000 rwxp 00141000 08:03 5925233 /lib/libc-2.5.so
002ad000-002b0000 rwxp 002ad000 00:00 0
002b0000-002b1000 r-xp 00000000 08:03 3905250 /usr/lib/libaio.so.1.0.1
002b1000-002b2000 rwxp 00000000 08:03 3905250 /usr/lib/libaio.so.1.0.1
002b2000-002bb000 r-xp 00000000 08:03 5925256 /lib/libnss_files-2.5.so
002bb000-002bc000 r-xp 00008000 08:03 5925256 /lib/libnss_files-2.5.so
002bc000-002bd000 rwxp 00009000 08:03 5925256 /lib/libnss_files-2.5.so
002bd000-002c8000 r-xp 00000000 08:03 5925425 /lib/libgcc_s-4.1.2-20080825.so.1
002c8000-002c9000 rwxp 0000a000 08:03 5925425 /lib/libgcc_s-4.1.2-20080825.so.1
00324000-0033e000 r-xp 00000000 08:03 5925219 /lib/ld-2.5.so
0033e000-0033f000 r-xp 00019000 08:03 5925219 /lib/ld-2.5.so
0033f000-00340000 rwxp 0001a000 08:03 5925219 /lib/ld-2.5.so
003bb000-003bc000 r-xp 003bb000 00:00 0 [vdso]
003bc000-01fc3000 r-xp 00000000 08:03 4984633 /u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1
01fc3000-020a7000 rwxp 01c07000 08:03 4984633 /u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1
020a7000-020c1000 rwxp 020a7000 00:00 0
025b1000-027ce000 r-xp 00000000 08:03 5006042 /u01/app/oracle/product/11.2.0/db_1/lib/libnnz11.so
027ce000-027fc000 rwxp 0021d000 08:03 5006042 /u01/app/oracle/product/11.2.0/db_1/lib/libnnz11.so
027fc000-027fe000 rwxp 027fc000 00:00 0
08048000-08049000 r-xp 00000000 08:03 1407670 /u01/app/oracle/product/11.2.0/db_1/bin/adrci
08049000-0804a000 rw-p 00000000 08:03 1407670 /u01/app/oracle/product/11.2.0/db_1/bin/adrci
09d62000-09e0d000 rw-p 09d62000 00:00 0 [heap]
b7e00000-b7e21000 rw-p b7e00000 00:00 0
b7e21000-b7f00000 ---p b7e21000 00:00 0
b7f68000-b7f90000 rw-p b7f68000 00:00 0
bfc54000-bfc6d000 rwxp bffe5000 00:00 0 [stack]
bfc6d000-bfc6e000 rw-p bfffe000 00:00 0Hi,
Please check Oracle support id : Troubleshooting ORA-3135 Connection Lost Contact (Doc ID 787354.1) -
Load xml - xls with OWB error "ORA-20011:....Start of root element expected
Hi
I need to load XML document into a table in Oracle warehouse builder.
I've followed the steps as given in the user guide and I get the following error,
ORA-20011: Error occurred while loading source XML document into the target database object PURCHASE_ORDERS.
Base exception: Start of root element expected.
ORA-06512: at "DC_DWH.WB_XML_LOAD_F", line 12
ORA-06512: at "DC_DWH.WB_XML_LOAD", line 4
ORA-06512: at line 7
The steps are:
DECLARE
CONTROL_INFO VARCHAR2(200);
BEGIN
CONTROL_INFO := '<OWBXMLRuntime> <XMLSource> <file>c:\xml_test\y.xml</file> </XMLSource> <targets> <target XSLFile="c:\xml_test\y.xsl" dateFormat="yyyy.MM.dd">PURCHASE_ORDERS</target> </targets></OWBXMLRuntime>';
DC_DWH.Wb_Xml_Load ( CONTROL_INFO );
COMMIT;
END;
where:
------------- y.xml ----------------
<purchaseOrder>
<id>103123-4</id>
<orderDate>2000-10-20</orderDate>
<shipTo country="US">
<name>Alice Smith</name>
<street>123 Maple Street</street>
<city>Mill Valley</city>
<state>CA</state>
<zip>90952</zip>
</shipTo>
<comment>Hurry, my lawn is going wild!</comment>
<items>
<item>
<partNum>872-AA</partNum>
<productName>Lawnmower</productName>
<quantity>1</quantity>
<USPrice>148.95</USPrice>
<comment>Confirm this is electric</comment>
</item>
<item>
<partNum>845-ED</partNum>
<productName>Baby Monitor</productName>
<quantity>1</quantity>
<USPrice>39.98</USPrice>
<shipDate>1999-05-21</shipDate>
</item>
</items>
</purchaseOrder>
-----------------y.xsl -------------------
<xsl:stylesheet version="2.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:fn="http://www.w3.org/2004/07/xpath-functions" xmlns:xdt="http://www.w3.org/2004/07/xpath-datatypes">
<SHIPTO_NAME>
<xsl:value-of select="purchaseOrder/shipTo/name"/>
</SHIPTO_NAME>
<SHIPTO_STREET>
<xsl:value-of select="purchaseOrder/shipTo/street"/>
</SHIPTO_STREET>
<SHIPTO_CITY>
<xsl:value-of select="purchaseOrder/shipTo/city"/>
</SHIPTO_CITY>
</xsl:stylesheet>
Any help is appreciatedHello,
The error occurs as far as your XSL file has incorrect structure. Your have to transform incoming XML in so-called (by Oracle) canonical form i.e.:
<ROWSET>
<ROW>
<FIELD_1>value-for-field-1</FIELD_1>
<FIELD_N>value-for-field-N</FIELD_N>
</ROW>
</ROWSET>
So, assuming your table has three fields : SHIPTO_NAME, SHIPT_STREET, SHIPTO_CITY, - your XSL file should look like following:
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" >
<xsl:template match=/>
<ROWSET>
<xsl:apply-templates select=purchaseOrder/>
</ROWSET>
</xsl:template>
<xsl:template match=purchaseOrder>
<ROW>
<SHIPTO_NAME><xsl:value-of select=shipTo/name/></SHIPTO_NAME>
<SHIPTO_STREET><xsl:value-of select=shipTo/street/></SHIPTO_STREET>
<SHIPTO_CITY><xsl:value-of select=shipTo/city/></SHIPTO_CITY>
</ROW>
</xsl:template>
</xsl:stylesheet>
Hope this will help. -
Data Guard Broker: errors ORA-16816 and ORA-16817 with Fast Start Failover
Hi,
my environment is:
OS: Windows XP Professional Edition SP2
DB: Oracle EE 10.2.0.3
Primary db: orcl
Standby db: stby
both databases are running on the same server.
I have configured Data Guard as described in the DG Administration Guide.
In the Data Guard Broker I switch to 'stby' succesfully and 'stby' is the primary db and 'orcl' is the standby db.
I switched back to 'orcl' as primary db and I get some errors:
DGMGRL> show database 'orcl' statusreport;
STATUS REPORT
INSTANCE_NAME SEVERITY ERROR_TEXT
* WARNING ORA-16817: configuration for Fast Start of Failover is not synchronized.
DGMGRL> show database 'stby' statusreport;
STATUS REPORT
INSTANCE_NAME SEVERITY ERROR_TEXT
* ERROR ORA-16816: wrong databaserole
* WARNING ORA-16817: configuration for Fast Start of Failover is not synchronized.
DGMGRL> show configuration;
Configuration
Name: DG1
Enabled: YES
Protection Mode: MaxAvailability
Fast-Start Failover: ENABLED
Databases:
orcl - Physical standby database
- Fast-Start Failover target
stby - Primary database
Current status for DG1:
Warning: ORA-16607: one or more databases failed.
I have searched for solutions on Metalink and google, but with no success.
Has anyone got this kind of problem?
Any suggestions on how to resolve it?
ThanksHi DigerDBA
I did your advice , the error disappear, and thanks for your advice , but do I need to keep standby_file_management='AUTO' or 'MANUAL' in primary and standby init files?
Am asking this because when I use the observer the failover failed and I get the following error
SQL Execution error=604, sql=[ALTER DATABASE COMMIT TO SWITCHOVER TO PRIMARY WAIT WITH SESSION SHUTDOWN]. See error stack below.
ORA-00604: error occurred at recursive SQL level 1
ORA-01275: Operation ADD LOGFILE is not allowed if standby file management is automatic.
Complete Failover operation failed in the step when attempting to convert the database to be the new primary.
Database Resource SetState Error (16771)
01/07/2014 09:14:43
Command FAILOVER TO epprod2 completed with error ORA-16771
if possible can you advice me please? -
ERROR ORA-12514: TNS: unable to start extract process
Hi Experts,
I have installed Oracle Golden Gate in the below environment.But unable to start extract process
Primary site (source): This is production DB and up and running.
RAC 2 nodes
Oracle RAC 11.2.0.1.0
ASM
Oracle GoldenGate 11g Release 1 (11.1.1.0.0)
Enterprise Linux Server release 5.5 (Carthage)
Processor Type x64
OS 64 bit
target Site (destination):
Standalone single server - Non RAC
Oracle version 11.2.0.1.0
ASM
Oracle GoldenGate 11g Release 1 (11.1.1.0.0)
Enterprise Linux Server release 5.5 (Carthage)
Processor Type x64
OS 64 bit
Getting below error in logs while starting extract process:
RECOVERY: reset to initial or altered checkpoint.
2012-08-05 10:34:10 ERROR OGG-00868 Oracle GoldenGate Capture for Oracle, aaa.prm: Attaching to
ASM server asm: (12514) ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor.
2012-08-05 10:34:10 ERROR OGG-01668 Oracle GoldenGate Capture for Oracle, aaa.prm: PROCESS
ABENDING.[oracle@ ggate]$
Getting below error while connecting with asm instance directly:
[oracle@ admin]$ sqlplus sys@asm as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on Sun Aug 5 11:16:11 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
[oracle@ ~]$ tnsping asm TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 05-AUG-2012 11:55
:42
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xxx-
scan)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ASM) (I
NSTANCE_NAME = +ASM1)))
OK (0 msec) Any help Please ?
Regards
LazyDBA
Edited by: LazyDBA11g on Aug 5, 2012 12:14 AM
Edited by: LazyDBA11g on Aug 5, 2012 11:25 PM
Edited by: LazyDBA11g on Aug 12, 2012 4:36 AMHello JK,
Thanks a lot for specific response.
SQL> select INST_ID, NAME, VALUE from gv$parameter where name like '%_listener%';
INST_ID NAME VALUE
1 local_listener (DESCRIPTION=(ADDRESS_LIST=(AD
DRESS=(PROTOCOL=TCP)(HOST=xxx_
data1-vip)(PORT=1521))))
1 remote_listener xxxdata-scan:1521
2 local_listener (DESCRIPTION=(ADDRESS_LIST=(AD
DRESS=(PROTOCOL=TCP)(HOST=xxx_
data2-vip)(PORT=1521))))
2 remote_listener xxxdata-scan:1521
If I add REMOTE_LISTENER pointing to SCAN ip address, Does it require DB bounce ? (Its production DB)
Regards,
LazyDBA
Edited by: LazyDBA11g on Aug 10, 2012 12:01 PM
Edited by: LazyDBA11g on Aug 12, 2012 4:48 AM -
Not able to Start the oracle db error "ORA-01031: insufficient privileges"
Hi experts,
I have oracle 11g setup on so solaris. i changed the db_cache_size
& processes values and stopped the DB services after that i am not able to start the oracle DB. Listener is running.
when i start the db server its giving the below error(startup.log)
./dbstart: Starting up database "orcl"
Mon Sep 27 04:31:08 MDT 2010
SQL*Plus: Release 11.1.0.7.0 - Production on Mon Sep 27 04:31:08 2010
Copyright (c) 1982, 2008, Oracle. All rights reserved.
SQL> ERROR:
ORA-01031: insufficient privileges
SQL> ORA-01031: insufficient privileges
SQL>
./dbstart: Database instance "orcl" warm started.
Please help me to ressolve this issue.
Thanks
Krishnayes, password file is there in /etc/passwd
here are the contents:
root:x:0:0:Super-User:/:/sbin/sh
lroot:x:0:0:Super-User:/:/sbin/sh
daemon:x:1:1::/:
bin:x:2:2::/usr/bin:/bin/false
sys:x:3:3::/:
adm:x:4:4:Admin:/var/adm:/bin/false
lp:x:71:8:Line Printer Admin:/usr/spool/lp:/bin/false
uucp:x:5:5:uucp Admin:/usr/lib/uucp:/bin/false
nuucp:x:9:9:uucp Admin:/var/spool/uucppublic:/usr/lib/uucp/uucico
listen:x:37:4:Network Admin:/usr/net/nls:/bin/false
nobody:x:60001:60001:Nobody:/:/bin/false
noaccess:x:60002:60002:No Access User:/:/bin/false
nobody4:x:65534:65534:SunOS 4.x Nobody:/:/bin/false
itunix:x:50000:14:IT Unix Account:/export/home/itunix:/bin/csh
hharika:x:765:38:Harpal Harika:/export/home/hharika:/bin/csh
prsingh:x:795:38:Pradeep Singh:/export/home/prsingh:/bin/csh
mmir:x:1229:21:Mir Monis Ali:/export/home/mmir:/bin/csh
bogunnai:x:1207:21:Bose Ogunnaike:/export/home/bogunnai:/bin/ksh
mpokala:x:2117:21:Mahesh Pokala:/export/home/mpokala:/bin/ksh
apopov:x:2385:38:Anton Popov:/export/home/apopov:/bin/csh
kkeith:x:2629:227:Kevin Keith:/home/kkeith:/usr/bin/ksh
sshd:x:22:22:SSH Privsep:/var/empty:/bin/false
patrol:x:2784:10:Patrol User:/opt/bmc:/usr/bin/ksh
smmsp:x:25:25:Sendmail Submission user:/none:/bin/false
ldap:x:50001:1002::/export/home/ldap:/bin/sh
perfuser:x:884:268::/export/home/perfuser:/bin/csh
webservd:x:80:80::/home/webservd:/bin/pfsh
oracle:x:156:40:Oracle Software Owner:/export/home/oracle:/bin/bash
perfuser_idc:x:64383:1::/home/perfuser_idc:/bin/sh
idc_perf:x:64384:292::/home/idc_perf:/bin/sh -
Oracle Not Starting : error ORA-19809
Hello All,
I was trying to start the 11gr2 database and getting the following error. Please can any one give some advise ? I manually deleted all archive logs using OS command but still i get the
same error when i try to start the database.
ORA-19815: WARNING: db_recovery_file_dest_size of 4039114752 bytes is 100.00% used, a nd has 0 remaining bytes available.
You have following choices to free up space from recovery area:
1. Consider changing RMAN RETENTION POLICY. If you are using Data Guard,
then consider changing RMAN ARCHIVELOG DELETION POLICY.
2. Back up files to tertiary device such as tape using RMAN
BACKUP RECOVERY AREA command.
3. Add disk space and increase db_recovery_file_dest_size parameter to
reflect the new space.
4. Delete unnecessary files using RMAN DELETE command. If an operating
system command was used to delete files, then use RMAN CROSSCHECK and
DELETE EXPIRED commands.
Errors in file /u01/app/oracle/diag/rdbms/orcl/DB11G/trace/DB11G_ora_2921.trc:
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 50629632 bytes disk space from 4039114752 limit
ARCH: Error 19809 Creating archive log file to '/u01/app/oracle/flash_recovery_area/O RCL/archivelog/2012_02_18/o1_mf_1_95_%u_.arc'
2012-02-18 15:58:55.099000 -05:00
ARC3: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
ARCH: Archival stopped, error occurred. Will continue retrying
ORACLE Instance DB11G - Archival Error
ORA-16038: log 3 sequence# 96 cannot be archived
ORA-19809: limit exceeded for recovery files
ORA-00312: online log 3 thread 1: '/u01/app/oracle/oradata/ORCL/onlinelog/o1_mf_3_7kp sygwt_.log'
ORA-00312: online log 3 thread 1: '/u01/app/oracle/flash_recovery_area/ORCL/onlinelog /o1_mf_3_7kpsyj6n_.log'
Errors in file /u01/app/oracle/diag/rdbms/orcl/DB11G/trace/DB11G_arc2_2927.trc:
ORA-16038: log 3 sequence# 96 cannot be archived
ORA-19809: limit exceeded for recovery files
ORA-00312: online log 3 thread 1: '/u01/app/oracle/oradata/ORCL/onlinelog/o1_mf_3_7kp sygwt_.log'
ORA-00312: online log 3 thread 1: '/u01/app/oracle/flash_recovery_area/ORCL/onlinelog /o1_mf_3_7kpsyj6n_.log'
Errors in file /u01/app/oracle/diag/rdbms/orcl/DB11G/trace/DB11G_ora_2921.trc:
ORA-16038: log 2 sequence# 95 cannot be archived
ORA-19809: limit exceeded for recovery files
ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/ORCL/onlinelog/o1_mf_2_7kp sydnm_.log'
ORA-00312: online log 2 thread 1: '/u01/app/oracle/flash_recovery_area/ORCL/onlinelog /o1_mf_2_7kpsyfp7_.log'
USER (ospid: 2921): terminating the instance due to error 16038
2012-02-18 15:58:56.976000 -05:00
Instance terminated by USER, pid = 2921Rama Krishna wrote:
I think database need to be started before you do any thing with RMAN my problem is database not even starting!You told SB that you had done "option 4":
4. Delete unnecessary files using RMAN DELETE command. If an operating
system command was used to delete files, then use RMAN CROSSCHECK and
DELETE EXPIRED commands.
Oh well. So you " *think* database need to be started before you do any thing with RMAN"
Did you try?
We don't need the database to be open for this, just have the control file mounted:
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@vmlnxsrv01 ~]$ rman target /
Recovery Manager: Release 11.2.0.1.0 - Production on Sat Feb 18 16:21:25 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database (not started)
RMAN> startup mount;
Oracle instance started
database mounted
Total System Global Area 849530880 bytes
Fixed Size 1339824 bytes
Variable Size 578817616 bytes
Database Buffers 264241152 bytes
Redo Buffers 5132288 bytes
RMAN> crosscheck archivelog all;
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=18 device type=DISK
validation succeeded for archived log
archived log file name=/orafra/ORCL/archivelog/2012_01_15/o1_mf_1_66_7k6t71k9_.arc RECID=3 STAMP=772653704
<snip>
archived log file name=/orafra/ORCL/archivelog/2012_02_18/o1_mf_1_80_7n06cfq0_.arc RECID=17 STAMP=775582480
Crosschecked 15 objects
RMAN> exit
Recovery Manager complete.
[oracle@vmlnxsrv01 ~]$ exit
logoutEdited by: EdStevens on Feb 18, 2012 4:32 PM -
One of out DB while starting gives error ORA-03113
One of out DB while starting gives error ORA-03113. Need some inputs to resolve this issue.
SQL> startup
ORACLE instance started.
Total System Global Area 603979776 bytes
Fixed Size 1250380 bytes
Variable Size 163580852 bytes
Database Buffers 432013312 bytes
Redo Buffers 7135232 bytes
Database mounted.
ORA-03113: end-of-file on communication channelRegards,
LokanathPlease find the dts.
Mon Jan 09 16:12:41 2012
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
Mon Jan 09 16:12:41 2012
alter database mount exclusive
Mon Jan 09 16:12:48 2012
Setting recovery target incarnation to 2
Mon Jan 09 16:12:49 2012
Successful mount of redo thread 1, with mount id 3125175737
Mon Jan 09 16:12:49 2012
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Mon Jan 09 16:12:49 2012
alter database open
Mon Jan 09 16:12:51 2012
Rolling back half complete log switch of thread 1
Mon Jan 09 16:12:52 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_lgwr_5024.trc:
ORA-00202: control file: 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\ECUPROG\CONTROL01.CTL'
ORA-27091: unable to queue I/O
ORA-27069: attempt to do I/O beyond the range of the file
OSD-04026: Invalid parameter passed. (OS 432)
Mon Jan 09 16:12:56 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_lgwr_5024.trc:
ORA-00204: error in reading (block 432, # blocks 1) of control file
ORA-00202: control file: 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\ECUPROG\CONTROL01.CTL'
ORA-27091: unable to queue I/O
ORA-27069: attempt to do I/O beyond the range of the file
OSD-04026: Invalid parameter passed. (OS 432)
LGWR: terminating instance due to error 204
Mon Jan 09 16:12:58 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_dbw0_5264.trc:
ORA-00204: error in reading (block , # blocks ) of control file
Mon Jan 09 16:13:00 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_pmon_3784.trc:
ORA-00204: error in reading (block , # blocks ) of control file
Mon Jan 09 16:13:01 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_psp0_4388.trc:
ORA-00204: error in reading (block , # blocks ) of control file
Mon Jan 09 16:13:01 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_mman_4828.trc:
ORA-00204: error in reading (block , # blocks ) of control file
Mon Jan 09 16:13:01 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_ckpt_2604.trc:
ORA-00204: error in reading (block , # blocks ) of control file
Mon Jan 09 16:13:01 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_reco_4492.trc:
ORA-00204: error in reading (block , # blocks ) of control file
Mon Jan 09 16:13:02 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_smon_4484.trc:
ORA-00204: error in reading (block , # blocks ) of control file
Mon Jan 09 16:13:03 2012
Instance terminated by LGWR, pid = 5024
Mon Jan 09 16:15:01 2012
WARNING: inbound connection timed out (ORA-3136)
Mon Jan 09 16:29:35 2012
WARNING: inbound connection timed out (ORA-3136)
Mon Jan 09 16:55:01 2012
WARNING: inbound connection timed out (ORA-3136)
Mon Jan 09 17:06:50 2012
WARNING: inbound connection timed out (ORA-3136)
Mon Jan 09 17:07:52 2012
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
processes = 150
__shared_pool_size = 155189248
__large_pool_size = 4194304
__java_pool_size = 4194304
__streams_pool_size = 0
sga_target = 603979776
control_files = D:\ORACLE\PRODUCT\10.2.0\ORADATA\ECUPROG\CONTROL01.CTL, D:\ORACLE\PRODUCT\10.2.0\ORADATA\ECUPROG\CONTROL02.CTL, D:\ORACLE\PRODUCT\10.2.0\ORADATA\ECUPROG\CONTROL03.CTL
db_block_size = 8192
__db_cache_size = 432013312
compatible = 10.2.0.1.0
db_file_multiblock_read_count= 16
db_recovery_file_dest = D:\oracle\product\10.2.0/flash_recovery_area
db_recovery_file_dest_size= 2147483648
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=ecuprogXDB)
job_queue_processes = 10
audit_file_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ECUPROG\ADUMP
background_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ECUPROG\BDUMP
user_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ECUPROG\UDUMP
core_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ECUPROG\CDUMP
db_name = ecuprog
open_cursors = 300
pga_aggregate_target = 201326592
PMON started with pid=2, OS id=4832
PSP0 started with pid=3, OS id=4208
MMAN started with pid=4, OS id=3216
DBW0 started with pid=5, OS id=4020
LGWR started with pid=6, OS id=4728
CKPT started with pid=7, OS id=4860
SMON started with pid=8, OS id=2932
RECO started with pid=9, OS id=3772
CJQ0 started with pid=10, OS id=5244
MMON started with pid=11, OS id=4568
MMNL started with pid=12, OS id=5828
Mon Jan 09 17:07:53 2012
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
Mon Jan 09 17:07:53 2012
ALTER DATABASE MOUNT
Mon Jan 09 17:07:58 2012
Setting recovery target incarnation to 2
Mon Jan 09 17:07:59 2012
Successful mount of redo thread 1, with mount id 3125157033
Mon Jan 09 17:07:59 2012
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Mon Jan 09 17:07:59 2012
ALTER DATABASE OPEN
Mon Jan 09 17:08:01 2012
Rolling back half complete log switch of thread 1
Mon Jan 09 17:08:02 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_lgwr_4728.trc:
ORA-00202: control file: 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\ECUPROG\CONTROL01.CTL'
ORA-27091: unable to queue I/O
ORA-27069: attempt to do I/O beyond the range of the file
OSD-04026: Invalid parameter passed. (OS 432)
Mon Jan 09 17:08:05 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_lgwr_4728.trc:
ORA-00204: error in reading (block 432, # blocks 1) of control file
ORA-00202: control file: 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\ECUPROG\CONTROL01.CTL'
ORA-27091: unable to queue I/O
ORA-27069: attempt to do I/O beyond the range of the file
OSD-04026: Invalid parameter passed. (OS 432)
LGWR: terminating instance due to error 204
Mon Jan 09 17:08:06 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_dbw0_4020.trc:
ORA-00204: error in reading (block , # blocks ) of control file
Mon Jan 09 17:08:07 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_pmon_4832.trc:
ORA-00204: error in reading (block , # blocks ) of control file
Mon Jan 09 17:08:07 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_reco_3772.trc:
ORA-00204: error in reading (block , # blocks ) of control file
Mon Jan 09 17:08:07 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_smon_2932.trc:
ORA-00204: error in reading (block , # blocks ) of control file
Mon Jan 09 17:08:07 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_ckpt_4860.trc:
ORA-00204: error in reading (block , # blocks ) of control file
Mon Jan 09 17:08:09 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_psp0_4208.trc:
ORA-00204: error in reading (block , # blocks ) of control file
Mon Jan 09 17:08:09 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_mman_3216.trc:
ORA-00204: error in reading (block , # blocks ) of control file
Instance terminated by LGWR, pid = 4728 -
Error ORA-03113 while install Oracle9i r2 on redhat Advance serer
Hello All:
Can anyone inform me how to correct the error ORA-03113 when I install oracle 9i on RedHat Advance Server 2.1
This error has something to do with setting my CLASSPATH I think.
Thank YOU
Ezra TaylorHi,
You don't mention where exactly you were receiving this error but I was receiving this error when doing the database creation via DBCA. I was able to get around this by altering the 'shmmax' parameter. I suspect that the classpath is not the issue in this case, infact I think it should be unset (as well as other things such as JAVA_HOME).
I initially tried the 100Mb specified at this site: http://www.e-gineer.com/instructions/install-oracle9i-on-linux.phtml
However this wasn't enough so I went for the 'loony' option and set it to its maximum value using sysctl as root (see below):
sysctl -w kernel.shmmax=4294967295
Obviously you probably don't want to leave it at this size and will want to find the appropriate value. (Oracle reccomends half of physical memory - I haven't tried this yet).
HTH,
Gareth. -
Error ORA - 12637 when start Oracle 8i Personnel
I have install oracle 8i personnel to the window 98 notebook. The installation successful without any error. But when I used the oracle8i navigator and click on the local database, error "ORA-12637: Can not attach to Oracle 8i" and "ORA-12637 - Packet Receive Failed"
The same error encountered when I start the database.
Appreciate if any could help on this matter.
Thanks in advance.Hi
Check weather entries are there in the registry.
Go to the services in the control panel and see if the oracle service has started if not start it. If this is up then the registry is OK. if If not u can create it using the oradim utility.
Then set your oracle_sid = <dbname> in the dos prompt and try connecting again.
Let us see what happense -
TNS-12560: TNS:protocol adapter error, ORA-12535: TNS:operation timed out
I installed Oracle 9i (9.2.0.1.0) on a Windows XP machine (the machine is in a domain). There were no errors during the instalation, but I have problems connecting from the same machine using the sid. Here are some examples from a command promt:
D:\>tnsping orcl9i
TNS Ping Utility for 32-bit Windows: Version 9.2.0.1.0 - Production on 31-OCT-20
08 17:43:22
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = timisoara01)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = orcl9i)))
TNS-12560: TNS:protocol adapter error
D:\>sqlplus "sys/pass@orcl9i as sysdba"
SQL*Plus: Release 9.2.0.1.0 - Production on Fri Oct 31 17:54:54 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-12535: TNS:operation timed out
Enter user-name:If I don't use the sid I can connect:
D:\>sqlplus "sys/pass as sysdba"
SQL*Plus: Release 9.2.0.1.0 - Production on Fri Oct 31 18:05:46 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL>If I go to services I see that the service is running: OracleServiceORCL9I Started.
Thx.Yes, the XP firewall is running. During the Oracle instalation it poped up twice, but I selected 'Unblock'. I can't turn it off because it is running using the domain settings, but I can add exceptions (programs or ports). Port 1521, tnsping or sqlplus are not blocked and there is an option 'Display a notification when Windows Firewall blocks a program' witch is checked.
-
Unable to add external data source in BAM : Error ORA-12505
Hi,
In BAM,
Im trying to add an external data source for creating a data object.
But when i try to test the connection i get the following error:
Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
Source: "java.sql.SQLException: Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor "
Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
Source: "oracle.net.ns.NetException: Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor "
As mentioned in another post ((Listener does not currently know of SID given in connection descriptor
i tried
lsnrctl stop.
delete listener.ora
lsnrctl start
lsnrctl reload
But still get the same error;
Im able to access the database with the specified username and password using sqlplus.
Your help will be appreciated.
Regards
Vignesh RamanathanFor #5, not Windows, ConfigMgr 2012 R2. Anything before ConfigMgr 2012 R2 is not supported for the 8.1 ADK.
For the permissions, what accounts are you setting this for. In general, if the share is on the same server, Everyone Full or Read on the Share and System Full or Read on the NTFS should work.
For the error message, it looks like you are trying to import an OS Image and not an OS Install Package. OS images use a WIM file and OS Install Packages use the entire set of source files from the media. For OS images, you must thus explicitly point it
to a specific WIM file.
Jason | http://blog.configmgrftw.com
Maybe you are looking for
-
Error Message when using Adobe Reader 8
Just recently when I have opened Adobe Reader 8 to read info on a web site, an ERROR REPORT window has opened. Can anyone suggest why this is happening and what should I do to remedy it.
-
Does anyone know how to connect my iphone5 to my macbook it's an old one with intel processor, when i connect the two, a message comes up that my software needs updating but my mac can't be updated to mountain lion?
-
Error when Loading Metadata for IDOC Adapter
Everybody, I know this should be pretty straight forward and that there are a few posts about it. But following the Demo 3.0 guide and the posts I can't seem to load the data into the IDOC Adapter. I did every step in the guide and when I try to ex
-
Read the last record in the database table..
Hi.. I am new to ABAP. So i have one condition to read the address number field in the last record from database table by using the person number where clause field. But the person number is same for some the records. So can any tell me the logic for
-
Earthlink provides an invoice for payment. It doesn't print correctly