Error output to 'write to spreadsheet'

Hi
I dont know, whether someone talked about this earlier.
But I prefer error output for 'write to spreadsheet file' subvi, as it keep crashing the software with error 5.
I want this,
Thanks
Cube

> that would make people think it works with Excel "spreadsheets".
actually, tab-delimited text files work fine with excel (of course there are some exceptions )
I would rather have this VI removed from the palettes and marked it as deprecated since it does not conform to LV style-guides (no error in/out) any more. I also guess that the pop-up dialog might block other LV threads which will be a serious issue if you have some data logging running. (I can find/build/provide several nice examples where a pop-up VI set to dialog appearance - and also user interaction on GUI elements - can block other loops running in LV)
Thus, I never use the pre-programmed write/read spreadsheet VIs, I always write my own version - usually takes 2-3 LV primitives + a few constants ...
just my 2 cents
-Benjamin
CLA

Similar Messages

Trying to write to spreadsheet...

I am trying to use a Tektronix TDS 420A oscillscope with LabVIEW to write
to a spreadsheet file that will be opened using Excel. I have tried wire
the graph output to the Write to Spreadsheet.vi, but it keeps giving me a
wiring error. Any ideas or help would be grealty appreciated.

Reverse engineer the process of creating graph and the error will be
aparent. To create graph you have to specify three parameters t0, dt, data,
these parameters are bundled in the respective order and passed on to the
graph indicator. If you just pass data then bundling is implicit, t=1,dt=1.
If you look at the inputs required by Spreadsheet VI, you will see that it
needs either 1D or 2D array, so unbundle your graphs data and you will be
OK. Also graph is an indicator so you cannot directly wire it in the
spreadsheet VI. Anyways I would read manual, for these type of errors.
Turn on help window and check online reference Ctrl-?.
"Darrell Sharp" wrote in message
news:[email protected]..
>
> I am trying to use a Tektronix TDS 420A
oscillscope with LabVIEW to write
> to a spreadsheet file that will be opened using Excel. I have tried wire
> the graph output to the Write to Spreadsheet.vi, but it keeps giving me a
> wiring error. Any ideas or help would be grealty appreciated.
>
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 80,000 Newsgroups - 16 Different Servers! =-----

Error 6 in write to spreadsheet file

Hello. My program reads a 1D array of 12 values, then increments each value as the controlled components activate. The program then writes the new value back to the file, replacing the old value. After running for a time, I get the following error message:
Error 6 occurred at Open/Create/Replace File In Write Spreadsheet STring.vi->Write To Spreadsheet File (DBL).vi->(name of my vi.)
I read some posts which said that this could be a problem of the file getting too large. Since I am writing over the same values, how can this happen?
Does anyone have any suggestions as to what can be done to prevent this error? If the file is getting too large, how can I prevent this from happening?
This is my first time posting. Is there a better way to attach a pic of a vi/block diagram than what I have done?
Attachments:
block diagram.docx ‏177 KB

For future reference, it is best if you just post the VI itself. It will make it easier on us to help.
Does the file increasing in size? You can simply look at the file in Windows Explorer to find that out. It also bothers me that you are rewriting the file so often. Why not only write the file once the loop is complete?
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Write to spreadsheet adds carriage return

I am using build array function to put together a number of strings and build an array of strings. The build array is in a while loop. A new line is added to the array every loop. I am using write to spread sheet function to save the spreadsheet to a file with xls extension. For some reason, a carriage return is inserted within the array. The array has 9 columns and a carriage return is put after the fourth column. I have not added this carriage return. Does anyone know why write to spreadsheet might automatically add a carriage return and how to remove it?
Thank you!
Solved!
Go to Solution.

Hi,
I took your posted VI and compiled it to an exe. I do not see the carriage return problem you are describing?
If you compile the VI you attached, do you see the problem or is it only in the original main application (that you cannot share)?
If the compiled exe works on your PC, does it also work on the 'different' computer where you see the issue with your original code?
-If it does work, then the issue must be in the source code for your original code. Sometimes, if you re-size string constants, for example, it can be hard to see carriage return's.
Another thing it could be perhaps, is if you are calling the "write spreadsheet" in two different places in your main code, then the way it works is it will write your two (different) input arrays to separate lines. If it is as in your example VI though, there should be no carriage return in the "middle" of the array.
For debug purposes, you could consider making a VI that takes a 1D string array input, iterates over each element in the array and searches for the carriage return character and gives an error/message on what iteration it found it, then you can back-track from there to see in the code responsible for making the string that went into that index.
QFang
CLD LabVIEW 7.1 to 2013

Scanning problem. Receive error message: cannot write file. Code 10,242,7. Please help

I just purchased and installed a Canon MX 922 multi-function printer. I'm having a problem with the scanner in that the output after scanning cannot be displayed and is accompanied with an error message : Cannot write file. Code 10,242,7. This occurs when scanning documents and images. My operating system Windows XP (32). Can anyone please help me solve this problem? Thank you.

Hello. Please try the following adjustment to see if we can resolve this issue: 1. Open the IJ Scan Utility from your Desktop or the Canon Utilities listing of the Start Menu.2. Click Settings.3. On the left, choose the Auto Scan tab.4. Click the Defaults button on the lower right.5. Continue this process with each tab on the left.6. Click OK at the bottom of the Settings menu. Once this has been done, try scanning from the IJ Scan Utility to test the unit. If these troubleshooting steps do not work, feel free to call us at 1-800-OKCANON.

Sqlplus and error output

Hi,
I have a problem, I open a sqlplus session on a bash script and I have to catch the error output.
I try to redirect the error output in this way:
sqlplus $DBCONN_STRING <<! 1>>$MSG_FILE 2>>$ERR_FILEBut in this way I have the ERR_FILE (that have to contain the errors) blank! The error is in the MSG_FILE (that contains other information, but I need only error.
How can I put the error messages in ERR_FILE?
Thanks, bye bye.

Dear Abdujaparov!
SQL*Plus writes it's output through stdout. Even ORA-XXXX errormessages are written through stdout. The stderr channel is only used if SQL*Plus is suffering an error and terminates abnormaly so you won't get ORA-XXX errormessages into your error file with 2>>.
I think that's not the answer you wanted to hear but I hope that it could be of any help to you.
Yours sincerely
Florian W.

Write to spreadsheet without prompting each time through a loop

So my goal is to take measurements every 5 minutes (or whatever the time delay is, currently 15 seconds until it is ready to use) for several days. My biggest issue is that it asks me after each run where to save to. Is there an easy fix so that once a location is chosen I would be able to walk away and just let it keep running for days and it would keep appending data into that file after each delay?
My other thought was data logging. The issue I get with trying to log the data is having it be usable. When I choose a blank excel file to log into I get "The data in the VI's log file is incompatible with the VI's front panel." Why is this incompatibile if I have it going ot a spreadsheet that can be saved as a .xls? Any help or suggestions would be appreciated. I attached my program that I have set up. I understand you dont have the Keithley device so you can't run it, but any help would still be greatly appreciated.
Solved!
Go to Solution.
Attachments:
Keithley 6514 Meas Voltage Example.vi ‏44 KB

altenbach wrote:
Dan Stewart wrote:
Is there an easy fix so that once a location is chosen I would be able to walk away and just let it keep running for days and it would keep appending data into that file after each delay?
Connect the new path output back to the path input via a globally initialized feedback node.
What is considered the new path output? I tried attaching the right side of the feedback node to the data as well as the spreadsheet vi. Neither worked. I also tried keeping the left side blank as well as attaching it to the spreadsheet with the right side to the data. I am not familiar with the feedback node and the help section didn't do a ton for helping me. All of the various combinations I have tried connecting the data or write to spreadsheet have all resulted in prompting me for a file each time through the loop still. I attached the most basic thing I tried, but if you would like other combinations I have tried I can re wire and attach those as well.
Attachments:
Keithley 6514 Meas Voltage Example.vi ‏44 KB

Error -200685 DAQmx Write Counter Frequency

I have to generate 4 finite pulse trains with Counter Output and a X-series board (NI PCIe-6321). I know that with X-series boards only one counter is used to generate finite pulse train. I use LabVIEW 2010 sp1 and DAQmx 9.3.5.
One task for each counter is created.
When only one task runs, everything is ok, but, when more than one task runs, i receive "error -200685: Pulse frequency specified is not supported for this device given the Counter Timebase Rate." from DAQmx Write Counter Frequency. Error reports invalid data&colon; 0,000000
I have checked data supplied and no zero frequency is passed to the VI. In fact, counter frequencies lower than 100 are forced to be 100 through a previous VI.
Thanks for the help
Attachments:
Error.PNG ‏42 KB
Zero frequencies avoided.PNG ‏7 KB

OriginalP ha scritto:
I payed attention to write non null frequencies and this is why this error sounds so strange to me.
My last words... i found that two null frequencies (1018 and 1019 array indexes) were passed to Counter Output (see attached images "Counter Output Front Panel Data.PNG" and "Counter Output Block Diagram Data.PNG").
It's quite strange, because VIs generating pulse train frequency data don't output these two null frequencies (see attached image "Array Output Data.png").
This pair of null frequencies is random, but definetively the error is not in Counter Output DAQmx Write VI.
Attachments:
Counter Output Front Panel Data.png ‏33 KB
Counter Output Block Diagram Data.PNG ‏21 KB
Array Output Data.png ‏21 KB

No rows will be sent to error output(s). Configure error or truncation dispositions to redirect rows...

We are trying to pump 3rd party data into our application. We have the following steps defined...
Excel Source of the 3rd Party delivered spreadsheet
Data Conversion of some Date data columns
OLE DB Destination of the raw 3rd party data that we want to store for reference and auditing purposes
Now we want to perform some edits and data cleansing of the 3rd party data. The first thing I tried was a Lookup to try and see if we can match the 3rd party data to our [MEMBER] Table. When I try flowing and connecting the
OLE DB Destination task to the Lookup task, I get a big fat warning...
No rows will be sent to error output(s). Configure error or truncation dispositions to redirect rows...
And the connection error appears in red and is labeled...
OLE DB Destination Error Output
Am I missing a step here? Do I need to clean this up or can I simply ignore it? Do I need to OLE DB Source the data before I attempt querying our database which is a different SQL Server Database than the Database we actually pump the 3rd party data into?
Thanks for your review and am hopeful for a quick reply.

Hi ITBobbyP,
If I understand correctly, you are connecting the OLE DB Destination component to a Lookup Transformation with red arrow. The connection error appears in red and is labeled “OLE DB Destination Error Output”. And when you execute the package, you also get
the warning message “No rows will be sent to error output(s). Configure error or truncation dispositions to redirect rows...”.
Please note that we can only set error output for the OLE DB Destination component, so the connection between OLE DB Destination component and Lookup Transformation is red arrow with label “OLE DB Destination Error Output”. This is a normal style.
Besides, by default, SSIS will "Fail component" on an error or truncation issue. We must tell SSIS that you do not want to fail the package, you want to "Redirect Row" which will allow the flow to continue down the red arrow. So
to remove the warning message, please refer to the following setting:
Edit the OLE DB Destination component
Go to the Error Output tab
Change the error redirect to Redirect Output.
The following screenshot is for your reference:
Reference:
Configure an Error Output in a Data Flow Component
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Write to spreadsheet file.vi is storing data in one row only.

The 8 points of data is going into one column in the spreadsheet. In the "Write to spreadsheet file string.vi" how do I write the 8 points to one row for each cycle?
I got this VI from NI's web a couple of years ago and forgot how to modify this part. I usume it is within the write file.vi.
Thank you in advance
Skip

I just reread your original post and the way the "Write to Spreadsheet File.vi" that ships with LV works by default is to put 1D arrays into rows. I read your post backwards and told you how to put the data in a column. Sorry.
In any case, perhaps you need to make sure the Transpose input ISN'T true, and that the delimiter IS a tab.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Windows Server 2012 VSS error "The system writer is missing"

Hello All,
I have a HP server that I have just installed Server 2012 standard, SQL Server 2012 and Sharepoint 2013.
When I try to take bare metal backup I get the error: "The system writer is missing", I have tried the backup as the local admin and domain admin.
The backup will only work if I decide to back up C:, once I select "Bare Metal" or "System State" the backup fails.
I have tried this solution: http://technet.microsoft.com/en-us/library/cc734021.aspx but have not had any luck yet.
When I run the command "vssadmin list writers" I can not see "System Writer" listed.
How can I add/turn on the System Writer?

Hi,
The system writer fails due to the fact that the trusted installer & system accounts are missing permissions to files in the directory %windir%\winsxs\filemaps\.
To resolve this issue, please run the following commands from an administrative elevated Command Window:
CD c:\windows\system32
Takeown /f %windir%\winsxs\filemaps\* /a
icacls %windir%\winsxs\filemaps\*.* /grant "NT AUTHORITY\SYSTEM:(RX)"
icacls %windir%\winsxs\filemaps\*.* /grant "NT Service\trustedinstaller:(F)"
icacls %windir%\winsxs\filemaps\*.* /grant "BUILTIN\Users:(RX)"
For more information, please also refer to the following links:
Discussion Forum FAQ: VSS System Writer is missing.
http://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/0b1eb10a-d666-4f5e-b657-c93b1d754a7f
Failure during Windows Server 2008 System State Backup & System Writer Missing
http://blogs.technet.com/b/chrad/archive/2009/11/18/failure-during-windows-server-2008-system-state-backup-system-writer-missing.aspx
Regards,
Arthur Li
TechNet Community Support

Som issues with Nvidia GTX960 - dmesg error output posted

I have some issues with icons not showing up, eg. in pamac. Just red crosses or what it's called.
Here is my dmesg error output.
$ dmesg --level=err,warn
[ 0.000000] ACPI: RSDP 0x00000000DD7F6000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000DD7F6080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DD8041A8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DD7F6198 00E009 (v02 ALASKA A M I 00000031 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000DDD45080 000040
[ 0.000000] ACPI: APIC 0x00000000DD8042B8 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DD804350 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: LPIT 0x00000000DD804398 00005C (v01 ALASKA A M I 00000000 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DD8043F8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000DD804938 000AD8 (v01 PmRef CpuPm 00003000 INTL 20091112)
[ 0.000000] ACPI: MCFG 0x00000000DD805410 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DD805450 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DD805488 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000DD8057F8 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: BGRT 0x00000000DD808D38 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.006274] ACPI: All ACPI Tables successfully acquired
[ 0.014978] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.014978] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.016204] Ignoring BGRT: invalid status 0 (expected 1)
[ 0.102300] #2 #3 #4 #5 #6 #7
[ 0.263542] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.265355] ACPI: Dynamic OEM Table Load:
[ 0.265358] ACPI: SSDT 0xFFFF8807FA42A800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
[ 0.265733] ACPI: Dynamic OEM Table Load:
[ 0.265736] ACPI: SSDT 0xFFFF8807FA419800 0005AA (v01 PmRef ApIst 00003000 INTL 20091112)
[ 0.266134] ACPI: Dynamic OEM Table Load:
[ 0.266135] ACPI: SSDT 0xFFFF8807FA46DA00 000119 (v01 PmRef ApCst 00003000 INTL 20091112)
[ 0.267060] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
[ 0.267063] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[ 0.285136] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.793801] ata1.00: supports DRM functions and may not be fully accessible
[ 0.794140] ata1.00: supports DRM functions and may not be fully accessible
[ 0.794388] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.794391] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff8807fe0d19b0), AE_NOT_FOUND (20150204/psparse-536)
[ 0.795480] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.795482] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff8807fe0d19b0), AE_NOT_FOUND (20150204/psparse-536)
[ 1.018384] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.018386] usb 3-3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.040606] systemd-journald[181]: Failed to set file attributes: Inappropriate ioctl for device
[ 1.114596] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.115441] ACPI Warning: SystemIO range 0x000000000000F000-0x000000000000F01F conflicts with OpRegion 0x000000000000F000-0x000000000000F00F (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-254)
[ 1.230333] nvidia: module license 'NVIDIA' taints kernel.
[ 1.230335] Disabling lock debugging due to kernel taint
[ 1.235547] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.21 Tue Jun 9 21:53:31 PDT 2015
[ 2.072087] NVRM: Your system is not currently configured to drive a VGA console
[ 2.072090] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 2.072091] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 2.072091] NVRM: drivers including, but not limited to, vesafb, may result in
[ 2.072092] NVRM: corruption and stability problems, and is not supported.
My hardware is a desktop with i7 4790K (4 cores with HT enabled) ASUS Z87-K motherboard, 32 GB Corsair 1600 MHz RAM. Samsung 850 PRO 1 TB SSD.
My inxi -F
System: Host: archie Kernel: 4.0.5-1-ARCH x86_64 (64 bit) Desktop: Xfce 4.12.2 Distro: Arch Linux
Machine: System: ASUS product: All Series
Mobo: ASUSTeK model: Z87-K v: Rev X.0x serial: 130612439103584
Bios: American Megatrends v: 1402 date: 11/05/2014
CPU: Quad core Intel Core i7-4790K (-HT-MCP-) cache: 8192 KB
clock speeds: max: 4400 MHz 1: 4000 MHz 2: 4002 MHz 3: 4000 MHz 4: 4000 MHz 5: 4256 MHz
6: 4001 MHz 7: 4002 MHz 8: 4002 MHz
Graphics: Card: NVIDIA GM206 [GeForce GTX 960]
Display Server: X.org 1.17.2 driver: nvidia tty size: 108x41 Advanced Data: N/A for root
Audio: Card-1 Intel 8 Series/C220 Series High Definition Audio Controller driver: snd_hda_intel
Card-2 NVIDIA Device 0fba driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k4.0.5-1-ARCH
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <masked>
Drives: HDD Total Size: 1024.2GB (4.4% used) ID-1: /dev/sda model: Samsung_SSD_850 size: 1024.2GB
Partition: ID-1: / size: 48G used: 13G (27%) fs: ext4 dev: /dev/sda3
ID-2: /home size: 769G used: 154M (1%) fs: ext4 dev: /dev/sda4
ID-3: /boot size: 511M used: 25M (5%) fs: vfat dev: /dev/sda1
ID-4: swap-1 size: 33.55GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors: System Temperatures: cpu: 29.8C mobo: 27.8C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 172 Uptime: 10 min Memory: 1133.0/32119.5MB Client: Shell (sudo) inxi: 2.2.25
Have I missed something to post?
Last edited by dockland (2015-06-17 20:30:48)

I read that this line in my case
[ 1.115441] ACPI Warning: SystemIO range 0x000000000000F000-0x000000000000F01F conflicts with OpRegion 0x000000000000F000-0x000000000000F00F (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-254)
is a bug and unfixable.
What does that mean and why is it "unfixable"? Is that some hardware that is not compatible with Arch at all?

Some Doubts in write into spreadsheet file function

hi,
i have some problem with writing the values into excel file...if \ found then the values after will write the values in next rows...
for eg. if i give 78/58\46/86 then i will write as in picture i hav attached..
Attachments:
Mod 1.vi ‏23 KB
Untitled.png ‏135 KB

The Write to Spreadsheet File is not the same as writing to Excel -- for that, you should use the Report Generation Toolkit (and there have been a number of posts here, as well as examples that ship with LabVIEW).
That being said, it is not clear (a) what you are trying to do, and (b) what is (or is not) happening. The image you attached looks OK ...

How can I use "write to spreadsheet" during the data is taking but not the end of all the loops

Hi,
I have to run an experiment on Labview 6 or 5. I don't have Labview 7 on that computer for some reason. My experiment is talking about 1000 hours, and I have a probelm on storing the data. Right now I am using "Write to spread sheet" and I set the "append" to false. And the data is installed at the end of the experiment, that means after 1000 hours. In the mean time if somthing oges wrong like power cut or what, I will lose all the data. So what I want to do is to save the data evertime when the data is took. I tired to set the "append" to true, but it does not let me to choose the "file path"--- when I choose this and select write on new or excisting file, it said" you may not be able to save on a exciting file" and it does not let me create a new file either. If anyone have the lidea like how can I use the "wrtie to spreadsheet" function and at the same time can install the data everytime inside the look, please let me know. Thanks alot.
KL

KL,
It sounds like you want to periodically save your data so it is in smaller files. (great idea) For this operation you will not want to append the data...if something happens to your system while the file is open it could become corrupt and ruin all the data. You need to write the new block of data to a new file every time. Now...this depends on how big your data is...if you only have like 500k of data to write in a block you should probably write several blocks before starting a new file. I don't know enough about how much data you are acquiring. In either case...the write to spreadsheet file.vi will need a different name each time it is called and you will not want to append. Append = false.
-Brett

Trying to install itunes on my new windows 8 laptop and getting an error message cannot write to file?

error message cannot write to file when trying to install itunes on windows 8 laptop.

Hi Stacy,
Welcome to Apple Support Communities.
Take a look at the article below, it provides a lot of great tips that will resolve most iTunes installation issues.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
If you run into any issues, just reply with details about the step you're on and what you're seeing.
-Jason

Error output to 'write to spreadsheet'

Similar Messages

Maybe you are looking for