Error PDF when sending mail
Dear all,
i'm facing a PDF error when sending mail, i figure that PDF attachment can't be more than 100 pages. is that correct?
below is the error message when open ADOBE, this won't happen when pages in adobe less than 100.
"Adobe Reader could not open 'NAME.PDF' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded) "
can anyone help me please.
Dear Experts
I already configured application server configuration file with specifying SMTP mail server IP in pluginParam parameter
<pluginParam name="mailServer">202.157.161.76</pluginParam>
<property name="enableSSL" value="no"/>
<property name="mailUserName" value="%[email protected]%"/>
<property name="mailPassword" value="%soyacl#123%"/>
what is the issue
Pl clarify
Please reply it's urgent
Similar Messages
-
Error message when sending mail
I am using a G3 tower runnig OSX 10.3.9 with 768 megs of memory. I am using Mac Mail and had tried to send an email that I had accidentally attached the wrong file (12 megs). I realized my mistake after I hit send and I tried to delete it from the outbox. I did, but then it wouldn't let me send any emails. It just stayed in the outbox. I can still receive mail just fine. I researched your message boards and thought I came up with the solution; delete the outbox file from the library/mail/mailbox folder. I did that and then restarted. Then when I tried to send an email it gave me this error message"
"This message could not be delivered and will remain in your Outbox until it can be delivered.
5.7.1 This message has been blocked because it is from a RBL/ORDBL IP address.(connection black ip 66.205.147.67)"
My ISP tech support people are certain that this is a software problem and they won't help me. Any ideas or suggestions would be appreciated. Thanks.This is not a software problem.
It appears your IP address or a range of IP addresses
including your IP address has been incorrectly
identified by the recipient's incoming mail server as
sending spam thru the account's SMTP server and has
been black listed.
Is your computer IP address 66.205.147.67?
Have you tried sending a test message to yourself or
to another email address?
Yes, that is my ip address. Yes, I have tried sending mail to myself and it stays in the outbox after giving me that error message. Is there anything I can tell my ISP to do? Or is it beyond their control? -
I get the following error message when sending mail when NOT connected by WiFi
"Cannot Send Mail
A copy has been placed in your Outbox. The recipient "xxxxxxx" was rejected by the server because it does not allow relaying"
My phone operator is Orange France and my email is Club-Internet (SFR)
Can anybody help please?
MTIA
PaulWhy are you using a usb ethernet adaptor? Just plug the modem into the usb port.
-
Error occured when sending mail with PDF attachment
Dear Experts
When i trigger email through SMTP server with PDF attachment using application server 10g , i got following error :
REP-50159: Executed successfully but there were some errors when distribute the output
i am using web.show_document utility
str1:='http://erp.ruchi.com:7777/reports/rwservlet?destype=mail'||'&desname='||c1rec.hist_email||'&from=[email protected]'||'&subject=Your Payslip for Month '||to_char(c1rec.tran_month,'Mon-YYYY')||'&desformat=PDF&server=rep_erp_bi&report=/asdeploy/webutil/pay/reports/payslip.rdf&userid=qwqwqw/aasasas@DIAMOND'||'&COMPANY='||:parameter.para_comp_code||'&LOCATION='||:parameter.para_loc_code||'&MONTH='||to_char(:sdate,'MM/YYYY')||'&ECODE='||c1rec.tran_ecode;
WEB.SHOW_DOCUMENT(str1,'_SELF');
previously i had successfully using this utility but now i am facing above error
Pl suggest
regards
shaileshDear Experts
I already configured application server configuration file with specifying SMTP mail server IP in pluginParam parameter
<pluginParam name="mailServer">202.157.161.76</pluginParam>
<property name="enableSSL" value="no"/>
<property name="mailUserName" value="%[email protected]%"/>
<property name="mailPassword" value="%soyacl#123%"/>
what is the issue
Pl clarify
Please reply it's urgent -
I was trying to email a link from a webpage I loaded in safari. The email sits in my outbox with a red exclamation point. WIll not send. Keeping getting an error message sending the message failed because you have exceeded your sending limit
"I keep getting a "you have exceeded your limit" on my email."
No explanation, makes no sense, it's happening with others.
I have to change (in my outgoing/unsent folder) my sending address from .mac to me.com. After reading the following helpful post:
To get outbox individual mails sent, Try going to outbox, opening each email to edit and change sending email to [email protected] by clicking arrow in from line. If [email protected] account does not show, go to settings > mail > icloud account > add "[email protected]" And, until this issue is resolved, set mail to send from [email protected]
(and you should be using smtp.mail.me.com) -
I have Adobe Acrobat Pro 9.1.2.
After installing the latest update, I can no longer send email from Acrobat. When I try to send the PDF via email, the message says " an error occured while sending mail"
This feature worked fine until I installed the update. Any help would be appreciated.Sorry to leave out needed info....
Email is Thunderbird 2.0.0.22
OS is XP -
When I send mail, I keep getting this message.
An error occurred while sending mail. The mail server responded: "JunkMail rejected - 71-12-190-31.dhcp.leds.al.charter.com ([127.0.0.1])
[71.12.190.31]:52956 is in an RBL, see
http://www.spamhaus.org/query/bl?ip=71.12.190.31". Please check the message recipient [email protected] and try again.
How do I get rid of this problem?
WNSHi there,
If you have a closer look at message you are receiving it already states the problem. The domain 71-12-190-31.dhcp.leds.al.charter.com is blacklisted by spamhaus.org (is in an RBL).
Your TB is (my guess) setup to send the message directly to the recipient.
As a rule of thumb the majority of mail sent from a dynamic dns address (the kind of address you are getting from your ISP) is blacklisted as a precaution against spam abuse due to virus/trojan infected PC's.
Nothing you can change there. Stop sending the message directly and use your ISP's account instead.
/Frans -
"smtp error" in webmail when sending mails
Hello,
"smtp error" in webmail when sending mails
why?With the very little data offered, I can only give a general idea.
"smtp error" usually means that webmail isn't pointed to a smtp server for sending out mails.
Webmail normally (by default) points to the same box it's on for sending mails out. You can change the host and port with configutil.
Some versions of webmail must point to iMS, and other mail servers won't work. Since I have no idea what version you have, I can't tell if this is a problem.
Did it ever work?
What version are you using? -
"An error occurred when sending email" Reader XI PDF W7 Outlook 2010
"An error occurred when sending email" Reader XI PDF W7 Outlook 2010
To bypass client-side email software the submit button should point to a server-side script such as PHP or ASP.net.
For more information and examples visit the following website:
http://www.pdfemail.net/examples/ -
Acrobat 9 Pro " An error occurred while sending mail"
Dear Gurus:
Free ice cream to the person with the answer that works. I use Vista OS, 32 bit; IE (Primary) and Mozilla; Outlook E-mail (primary) and Windows Mail. The preceding has been the case for the last two years so "nothing has changed". I used Adobe Acrobat 9 Pro for two years and designed a number of interactive forms and used the functionality as much as possible. Overall a good experience with Pro 9
Case in point, I designed an interactive employment application that was regularly used, updated and re-released over a period of about two years without incident. It was set up to be completed online by employment applicants. Once completed, they would click to "e-mail the office" the completed application then close the document. It was set up with the button to send a form, and more precisely to send the form as .FDF to the mailto: address#1; address #2. Again it worked fine using either Mozilla or IE until last week. As usual, I made some minor edits to the existing body fields and left the buttons alone sine there was no need to bother them.
I emailed the revised .PDF document to "the web guy" who added it to the website- like all the times before. I went online to "test it" as usual so I filled it out. When I click the button to send form to office, the option comes up to select the email client. I use Outlook so I selected "Desktop E-mail Application", click OK and then I immediately get the message "An error has occurred while sending mail". In the past without fail, the Outlook would open after 1-3 seconds and attach the .FDF file with the normal .FDF and data jargon. no problem... Also, I am aware of extending features to Reader and the licensing issue, but I doubt that is an issue.....
So, before I posted here I tried a few things:
A- I tried opening the source .PDF application locally on my PC and filled it out. I clicked the button to "sent the file" to myself. To be clear this was not posted on the website, but it did open Outlook, create the email, add the .FDF and sent it to me. HHHMMMM so it works locally....
B- Next, I started fresh with a blank adobe document page and added two items: 1- a text field and a new email submit button I created to send the data via FDF. I set it up, it worked fine when I tested it locally on the PC and created the .FDF file and the Outlook email and I sent it to myself. Then I took this same little test file and added it to a different website I have access to, I re-published the site, ccessed the form and no dice...... I got the same message, " an error occurred while sending mail" when I clicked OK to use the Desktop Email Application.
C- I read other posts and Googled for about 6 hours yesterday and now I am missing clumps of hair.
So, it seems something "happened" that will not let the email be created from an existing form; or a NEW form that are available for use on a website; but BOTH work just fine if accessed on a local PC.
Please , and thank you..
Brian P.Hi Bill,
Thank you for your follow up. I'm not sure what you mean by, "did I do a comparison to the original". If you're asking whether I'm sure the .PDF and the .FDF are the "same" documents, they are... however the problem is even if they were entirely different forms, my issue is once the submit form button is clicked, Outlook fails to initialize and attach the .FDF file .
I mentioned how I tried to recreate the "error" by building a new form from scratch in order to eliminate all the possible variables of having a bug in the form that had been updated so many times before without incident. Even with the new form having just one text field and one submit form button, it worked as needed when I used the .PDF file locally right from my PC by filling out the field and submitting the form's .FDF data to myself. It opened the Outlookprogram, created the mail and attached the .FDF file. I clicked "send" and away it goes from "me" to "me" and I was able to open the email, click the .FDF then browse to the .PDF source form so the files could extract into the .PDF. All normal and all Okay , like 100 times before using the WEB, but not now... .
Today, even that simple form with one field and one submit button encounters the same "An error has occurred while sending mail" message upon clicking on the web based submit button. The option comes up to let me select the email server and when I click "OK" , the error notice comes up... grrrrrrrrrrrrr
In short, when the form is used in a website environment, it doesn't want to create the outgoing email with the .FDF file attachment. Normally, it worked like a peach.
?? I dunno
BP -
Adobe acrobat error - unable to send mail
I`m using Win 7 pro 64bit with acrobat 9.0 pro 32 bit.
I am now unable to send .PDF`s from either the toolbar or from the File, attach mail.
The system says Ädobe acrobat error - unable to send mail"
Any hep would be appreciated.
Many thanksI don't remember much of Acrobat 9...
What email client are you using? Are the Acrobat preferences configured to use that email client? Is it running when you try to send that document?
[topic moved to Acrobat forum] -
Having been on Thunderbird for some years I have suddenly got the following message when trying to send mail.
An (SMTP) error occurred while sending mail. The server responded: Requested action aborted: This mail account has sent too many messages in a short amount of time. Please try later..
I have checked the SMTP server settings in tools, account settings and they are as they have always been. Is there something I have missed?Sending through web mail is totally irrelevant to using an SMTP server. The message even says it is from the server. Why do you think this is a Thunderbird problem.
The provider has put in place measures to keep people from spamming other email recipients using thier SMTP server. You have seen the result of those measures. -
An error occured while sending mail: SMTP server error. The server responded: (null)
I'm getting this set of error messages intermittantly:
<P>
An error occured while sending mail: smtp server error
the server responded: (null) contact email admin
for assistance
other message
an error occured while sending mail: smtp server error
the server responded: intermail,
end with quote.quote contact email admin
for assistance
<P>
This problem may occur at low-use times when Messaging is installed with the
Trend virus protection software on the same system.
<P>
Change the version of the Trend software from 3.0 to the older 2.62 version.It's possible that your provider has made a change.
I think STARTTLS usually is used with port 587, instead of the standard SSL port 465.
Could you look up your provider's current SMTP settings to see whether your "Outgoing Server" settings need to be updated? If it's difficult to translate between your provider's help page and Thunderbird's dialog controls, you could provide a link to your provider's help page. -
When I send message the reply is "Access Denied" and a bunch of gobbly-gook ending with please re-check message. What would I check for? The G-G is of absolutely no value to the human species.
An error occurred while sending mail. The mail server responded: Access denied...3c61d9886161c1c1b119b169f84d0c00bd1d41014c8da58d391805d17cbcdccd89e9557dcc85058535d178217d0831cc6d65.... Please check the message and try again.
So what now. Mozilla must be the offspring of Microsoft in that help NEVER HELPS, EVER.Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you. -
5.7.1 comes up when sending mail
Here is what comes up when ever I try sending mail from my Mac:
Alert: an error occurred while sending mail. the mail server responded: 5.7.1 sender address rejected not owned by user.
I can receive mail but cannot send.Check this thread out!
http://forums.verizon.com/t5/Verizon-net-Email/Eudora-7-1/m-p/723997/highlight/true#M17627
========
The first to bring me 1Gbps Fiber for $30/m wins!
Maybe you are looking for
-
Having difficulty accessing I Tunes on my Windows 7 Vista. Error messages are two fold: 1. MSVCR80.dll not found. Reinstall may help correct prob. 2. Windows Error 126.
-
Spelling Errors In Mail Are Not Highlighted As I Type
Hi, I have 'Check Spelling As I Type' enabled in Preferences in Mail, however my spelling errors are not highlighted (underlined in red) as I type. This feature used to work but for some reason no longer does - not sure if this is attributable to rec
-
Disabling "auto scroll to the bottom function" on JScrollPane
Hi all! I have a little problem with JScrollPane. I have a JEditor Pane on my JScrollPane which content type is text/html. When the content of html code is too large scrollbars are appear and vertical scrollbar automatically scrolls down to the botto
-
Hi All, We are using Crystal Reports 2011 with Business objects 4.0. We are planning to upgrade our database server, Is there a way to find all the databases associated to reports using a query? or any tool to get the required data? Thanks in advance
-
Post Author: mecca CA Forum: Charts and Graphs I hope someone knows the answer to this question. Can you change the color format of a stacked bar chart line individually (not the whole lines color), I need to hide the min field by using the color whi