Error: pool exhausted with 100 threads
hi,
I was wondering if anybody can provide me some
leads on how to deal with this problem... I have a
servlet that queries a database and churns
out (in response) a data populated html, however
after some time and several hits on the servlet, I
get the error that "ThreadPool: pool exhausted with
100 threads".
I'm not so sure if this is a webserver (I use tomcat)
or servlet problem, would certainly appreciate if
anybody can provide some help. tia!
json
You are experiencing a problem with the Tomcat Configuration likely. Look in the documentation and read about the configuration, and find where to increase the maximum number of clients at a time. If you are running a low-load server (just you?) then make sure that your servlets aren't entering an infinite loop somewhere and never exiting. Also, make sure you close all your printwriters or streaming outputs/inputs, because that can sometimes keep a thread alive longer than it should.
Good luck,
GN
Similar Messages
-
100% thread pool/CPU usage prevent MII Applications from working
Hello to all,
our MII Applications were running on MII 11.5 (windowsserver 2003, with IIS) without any problems.
We migrated these MII Applications to SAP xMII Version 12.0 SP8, SAP NW 7.00 SP20, Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_22-rev-b03, mixed mode).
Since then we faced several problems that prevent the MII Applications from working, e.g.
- 100% application thread pool usage rate
- 100% CPU usage
- awful lot of http connections
Several sap support calls didn't find the root cause.
Workaround: restart sap system weekly
Does anyone has any idea how to go on?
Thanks
SimoneHi Mike,
sap support told us to install this Java version.
Furthermore SAP Note 716604 says "do not use J2SE 5.0" and "Currently, we recommend 1.4.2_24 b06".
Any more ideas?
Regards,
Simone -
Exhausted with all options for error "No active userstore is set"
Dear Experts,
I changed the client number to 200 in UME configuration from default client number 001. Also I had created a system user SAPJSF in the backend system in client 200. I restarted the j2ee engine but its not starting. I received this error WebAS running. Server not found. The log says "No active userstore is set".
I have researched the forum and tried out *all the notes and set the parameters in visual administrator tool*. Nothing is working.
I have reinstalled my system atleast 4 times after and finally I have exhausted with all options.
Please Help.Dear Sunny,
Thanks for the response. I had tried it for both client 000 and client 001. The problem still persists. I am thinking of raising an OSS message. Any other suggestion appreciated.
Regards,
P Thompson -
Error in WebDynpro with WebServices
Hi all,
Im getting some errors using applications deployed in WEB AS SP9 that runs as a WebDynpro IView in EP.
Running the application as standalone (out of EP) this works fine.
NetWeaver Developer Studio 2.0.9
WebDynpro application using WebServices that access Oracle 8i database in the follow sequence:
WebServices -> Session Bean stateless -> Entity Bean CMP (manage connections; generate sql code, etc.)
In WebDynpro application we import WebService Model by the follow sequence:
New Model - Import Web Service Model - Local Server for WSDL Source - <WebService deployed>
In each WebServices we have created these methods:
findByID(ID);
getAll();
insert(parameters);
remove(ID);
update(parameters);
We guess that the error is generated in Entity Bean because all WebServices generate these errors.
<b>Error 1 - Application with WebServices Model</b>
Error stacktrace:
com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Repository Object br.com.xxx.fluxo.Fluxo/ComponentInterface:FluxoInterface/InterfaceViews:CadastroSituacaoFluxoInterfaceView/InboundPlugs:Default associated via relation RepositoryObjectRelation(br.com.xxx.fluxo.application.CadastroSituacaoFluxoApp, StartupPlug) does not exist.
at com.sap.tc.webdynpro.repository.RelationToOne.resolveTargets(RelationToOne.java:124)
at com.sap.tc.webdynpro.repository.RelationToOne.mergeTargets(RelationToOne.java:108)
at com.sap.tc.webdynpro.repository.RelationToOne.mergeTargets(RelationToOne.java:72)
at com.sap.tc.webdynpro.repository.RelationToOne.getTarget(RelationToOne.java:174)
at com.sap.tc.webdynpro.repository.RepositoryObject.getRelatedModelObject(RepositoryObject.java:349)
at com.sap.tc.webdynpro.progmodel.repository.IWDApplicationInfo$Implementation.getStartupPlugInternal(IWDApplicationInfo.java:319)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:355)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:593)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:249)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:821)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
-- end --
<b>Error 2 - Application with WebServices Model</b>
An error has occurred:
"Failed to process the request."
Please contact your system administrator.
Hide details
Web Dynpro client:
HTML Client
Web Dynpro client capabilities:
User agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2; .NET CLR 1.1.4322), version: null, DOM version: null, client type: msie6, client type profile: ie6, ActiveX: enabled, Cookies: enabled, Frames: enabled, Java applets: enabled, JavaScript: enabled, Tables: enabled, VB Script: enabled
Web Dynpro runtime:
Vendor: SAP, Build ID: 6.4009.00.0000.20041011171310.0000 (release=630_VAL_REL, buildtime=2004-10-19:21:48:59[UTC], changelist=290362, host=PWDFM026)
Web Dynpro code generators of DC local/Apontamentos:
SapDictionaryGenerationCore: 6.4009.00.0000.20040910101802.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:31:53[UTC], changelist=280522, host=PWDFM026.wdf.sap.corp)
SapMetamodelWebDynpro: 6.4009.00.0000.20040910102423.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:36:19[UTC], changelist=280539, host=PWDFM026.wdf.sap.corp)
SapMetamodelCore: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:26:00[UTC], changelist=269100, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationTemplates: 6.4009.00.0000.20041011171310.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:54:34[UTC], changelist=290362, host=PWDFM026)
SapWebDynproGenerationCTemplates: 6.4009.00.0000.20041011171310.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:54:34[UTC], changelist=290362, host=PWDFM026)
SapGenerationFrameworkCore: 6.4009.00.0000.20040910102127.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:25:03[UTC], changelist=280527, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 6.4009.00.0000.20040910102318.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:41:01[UTC], changelist=280536, host=PWDFM026.wdf.sap.corp)
SapMetamodelDictionary: 6.4009.00.0000.20040609163924.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:29:01[UTC], changelist=253570, host=PWDFM026.wdf.sap.corp)
SapMetamodelCommon: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:26:11[UTC], changelist=269100, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationCore: 6.4009.00.0000.20040910102318.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:41:33[UTC], changelist=280536, host=PWDFM026.wdf.sap.corp)
SapDictionaryGenerationTemplates: (unknown)
Web Dynpro code generators of DC sap.com/tcwddispwda:
No information available
Web Dynpro code generators of DC sap.com/tcwdcorecomp:
No information available
J2EE Engine:
6.40 patchlevel 87037.313
Java VM:
Java HotSpot(TM) Server VM, version: 1.4.2_06-b03, vendor: Sun Microsystems Inc.
Operating system:
Windows 2000, version: 5.0, architecture: x86
Error stacktrace:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Did not find repository information for controller NotProductiveEventController
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.createCustomController(DelegatingComponent.java:55)
at com.sap.tc.webdynpro.progmodel.controller.Component.getCustomControllerInternal(Component.java:428)
at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:371)
at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:400)
at com.sap.tc.webdynpro.progmodel.context.MappingInfo.init(MappingInfo.java:138)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:746)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:761)
at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:540)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:422)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:130)
at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:41)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.displayToplevelComponent(ClientComponent.java:134)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:374)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:593)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:249)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:821)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
<b>Error 3 - Application with RFC Model</b>
An error has occurred:
"Failed to process the request."
Please contact your system administrator.
Hide details
Web Dynpro client:
HTML Client
Web Dynpro client capabilities:
User agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2; .NET CLR 1.1.4322), version: null, DOM version: null, client type: msie6, client type profile: ie6, ActiveX: enabled, Cookies: enabled, Frames: enabled, Java applets: enabled, JavaScript: enabled, Tables: enabled, VB Script: enabled
Web Dynpro runtime:
Vendor: SAP, Build ID: 6.4009.00.0000.20041011171310.0000 (release=630_VAL_REL, buildtime=2004-10-19:21:48:59[UTC], changelist=290362, host=PWDFM026)
Web Dynpro code generators of DC local/Apontamentos:
SapDictionaryGenerationCore: 6.4009.00.0000.20040910101802.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:31:53[UTC], changelist=280522, host=PWDFM026.wdf.sap.corp)
SapMetamodelWebDynpro: 6.4009.00.0000.20040910102423.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:36:19[UTC], changelist=280539, host=PWDFM026.wdf.sap.corp)
SapMetamodelCore: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:26:00[UTC], changelist=269100, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationTemplates: 6.4009.00.0000.20041011171310.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:54:34[UTC], changelist=290362, host=PWDFM026)
SapWebDynproGenerationCTemplates: 6.4009.00.0000.20041011171310.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:54:34[UTC], changelist=290362, host=PWDFM026)
SapGenerationFrameworkCore: 6.4009.00.0000.20040910102127.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:25:03[UTC], changelist=280527, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 6.4009.00.0000.20040910102318.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:41:01[UTC], changelist=280536, host=PWDFM026.wdf.sap.corp)
SapMetamodelDictionary: 6.4009.00.0000.20040609163924.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:29:01[UTC], changelist=253570, host=PWDFM026.wdf.sap.corp)
SapMetamodelCommon: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:26:11[UTC], changelist=269100, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationCore: 6.4009.00.0000.20040910102318.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:41:33[UTC], changelist=280536, host=PWDFM026.wdf.sap.corp)
SapDictionaryGenerationTemplates: (unknown)
Web Dynpro code generators of DC sap.com/tcwddispwda:
No information available
Web Dynpro code generators of DC sap.com/tcwdcorecomp:
No information available
J2EE Engine:
6.40 patchlevel 87037.313
Java VM:
Java HotSpot(TM) Server VM, version: 1.4.2_06-b03, vendor: Sun Microsystems Inc.
Operating system:
Windows 2000, version: 5.0, architecture: x86
Error stacktrace:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Did not find repository information for controller ZMANPP012Controller
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.createCustomController(DelegatingComponent.java:55)
at com.sap.tc.webdynpro.progmodel.controller.Component.getCustomControllerInternal(Component.java:428)
at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:371)
at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:400)
at com.sap.tc.webdynpro.progmodel.context.MappingInfo.init(MappingInfo.java:138)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:746)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:761)
at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:540)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:422)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:130)
at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:41)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.displayToplevelComponent(ClientComponent.java:134)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:374)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:593)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:249)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:821)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)Hi,
I feel this error is nothing to do with webservice model.
Please check your application properties like startupPlug,Interface View etc. Set the properties correctly and deploy once again.
Regards, VIP -
Error in communicating with Excel Calculation Services
When attempting to use Excel Web Access web part, I get "We're sorry. We ran into a problem completing your request. Please try that again in a few minutes."
Checked event log and found
There was an error in communicating with Excel Calculation Services
http://my server:32843/49082a5d56c141629497dd8b28375f47/ExcelService*.asmx exception: The remote server returned an error: (503) Server Unavailable.
[Session:
User: ].
I googled the error and, as suggested by various sources, rebooted the server. (Same issue occurs) I also tried disabling asp.net impersonation with no change. Ideas?Hi ,
Reason for the error :
The Excel Services Application server computer is in a non-valid state and may need to be restarted.
Resolution : (Before taking the step toward to restart the server, try the below option)
Restart your excel service application app pool/ restart the excel service. (Reference :http://technet.microsoft.com/en-us/library/ee513104(v=office.14).aspx)
If you have more than one application server in the farm , then try start the excel serviceto a different server.
Regards,
Senthil -
Error in communicating with Group Administration Server
Hello everyone, i am requesting your help for an issue with LMS 4.2.5
When i browse to Admin-> Group Management -> Fault.
I get the following:
OGS Server Error
Error
Error in communicating with Group Administration Server.
It may be down or not yet up. Please make sure that the Group Administration Server is up and running, then refresh the page.
here is the pdshow output
pdshow
Process= ESS
State = Program started - No mgt msgs received
Pid = 5536
RC = 0
Signo = 0
Start = 10/31/14 14:13:21
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= EssMonitor
State = Running normally
Pid = 5567
RC = 0
Signo = 0
Start = 10/31/14 14:13:25
Stop = Not applicable
Core = Not applicable
Info = ESS is fully up now !
Process= EventFramework
State = Program started - No mgt msgs received
Pid = 5584
RC = 0
Signo = 0
Start = 10/31/14 14:13:26
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= SyslogCollector
State = Running normally
Pid = 5585
RC = 0
Signo = 0
Start = 10/31/14 14:13:26
Stop = Not applicable
Core = Not applicable
Info = SyslogCollector Started at Fri Oct 31 14:13:28 CST 2014
Process= RMEDbEngine
State = Program started - No mgt msgs received
Pid = 5586
RC = 0
Signo = 0
Start = 10/31/14 14:13:26
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= FHDbEngine
State = Program started - No mgt msgs received
Pid = 5663
RC = 0
Signo = 0
Start = 10/31/14 14:13:30
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= EPMDbEngine
State = Program started - No mgt msgs received
Pid = 5696
RC = 0
Signo = 0
Start = 10/31/14 14:13:34
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= EPMServer
State = Running normally
Pid = 5729
RC = 0
Signo = 0
Start = 10/31/14 14:13:38
Stop = Not applicable
Core = Not applicable
Info = EPMServer is up and running
Process= AdapterServer
State = Program started - No mgt msgs received
Pid = 5748
RC = 0
Signo = 0
Start = 10/31/14 14:13:42
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= AdapterServer1
State = Program started - No mgt msgs received
Pid = 5749
RC = 0
Signo = 0
Start = 10/31/14 14:13:42
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= FHServer
State = Running normally
Pid = 5750
RC = 0
Signo = 0
Start = 10/31/14 14:13:42
Stop = Not applicable
Core = Not applicable
Info = FHServer started.
Process= INVDbEngine
State = Program started - No mgt msgs received
Pid = 5751
RC = 0
Signo = 0
Start = 10/31/14 14:13:42
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= PMServer
State = Running normally
Pid = 5936
RC = 0
Signo = 0
Start = 10/31/14 14:13:46
Stop = Not applicable
Core = Not applicable
Info = PMServer is up and running
Process= IpmDbEngine
State = Program started - No mgt msgs received
Pid = 5960
RC = 0
Signo = 0
Start = 10/31/14 14:13:50
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= UPMDbEngine
State = Program started - No mgt msgs received
Pid = 5993
RC = 0
Signo = 0
Start = 10/31/14 14:13:54
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= UPMDbMonitor
State = Running normally
Pid = 6026
RC = 0
Signo = 0
Start = 10/31/14 14:13:58
Stop = Not applicable
Core = Not applicable
Info = DbMonitor Running Normally.
Process= ANIDbEngine
State = Program started - No mgt msgs received
Pid = 6027
RC = 0
Signo = 0
Start = 10/31/14 14:13:59
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= MACUHIC
State = Running normally
Pid = 6055
RC = 0
Signo = 0
Start = 10/31/14 14:14:03
Stop = Not applicable
Core = Not applicable
Info = Started.
Process= UTLITE
State = Running normally
Pid = 6056
RC = 0
Signo = 0
Start = 10/31/14 14:14:03
Stop = Not applicable
Core = Not applicable
Info = Started.
Process= FDRewinder
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= CmfDbEngine
State = Program started - No mgt msgs received
Pid = 6057
RC = 0
Signo = 0
Start = 10/31/14 14:14:03
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= CmfDbMonitor
State = Running normally
Pid = 6183
RC = 0
Signo = 0
Start = 10/31/14 14:14:08
Stop = Not applicable
Core = Not applicable
Info = DbMonitor Running Normally.
Process= DfmBroker
State = Running normally
Pid = 6190
RC = 0
Signo = 0
Start = 10/31/14 14:14:09
Stop = Not applicable
Core = Not applicable
Info = DfmBroker is running normally
Process= DfmServer
State = Running normally
Pid = 6322
RC = 0
Signo = 0
Start = 10/31/14 14:14:13
Stop = Not applicable
Core = Not applicable
Info = DfmServer initialized OK.
Process= DfmServer1
State = Running normally
Pid = 6323
RC = 0
Signo = 0
Start = 10/31/14 14:14:13
Stop = Not applicable
Core = Not applicable
Info = DfmServer1 initialized OK.
Process= DFMLogServer
State = Program started - No mgt msgs received
Pid = 6324
RC = 0
Signo = 0
Start = 10/31/14 14:14:13
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= DFMCTMStartup
State = Administrator has shut down this server
Pid = 0
RC = 0
Signo = 0
Start = 11/03/14 11:55:05
Stop = 11/03/14 11:55:05
Core = Not applicable
Info = Application started by administrator request.
Process= FHPurgeTask
State = Transient terminated
Pid = 0
RC = 0
Signo = 0
Start = 11/03/14 00:00:00
Stop = 11/03/14 00:00:44
Core = Not applicable
Info = DPS Task FHPurgeTask completed at Mon Nov 03 00:00:44 CST 2014. For status check Job Browser UI.
Process= DFMMultiProcLogger
State = Program started - No mgt msgs received
Pid = 6327
RC = 0
Signo = 0
Start = 10/31/14 14:14:13
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= CSDiscovery
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= DCRDevicePoll
State = Transient terminated
Pid = 0
RC = 0
Signo = 0
Start = 11/03/14 09:15:02
Stop = 11/03/14 09:15:50
Core = Not applicable
Info = Application started by administrator request.
Process= CSRegistryServer
State = Running normally
Pid = 6328
RC = 0
Signo = 0
Start = 10/31/14 14:14:13
Stop = Not applicable
Core = Not applicable
Info = CSRegistryServer is running
Process= Tomcat
State = Program started - No mgt msgs received
Pid = 6330
RC = 0
Signo = 0
Start = 10/31/14 14:14:13
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= TomcatMonitor
State = Running normally
Pid = 6670
RC = 0
Signo = 0
Start = 10/31/14 14:14:17
Stop = Not applicable
Core = Not applicable
Info = Tomcat Server up
Process= Apache
State = Running normally
Pid = 7183
RC = 0
Signo = 0
Start = 10/31/14 14:16:02
Stop = Not applicable
Core = Not applicable
Info = Web Server initialized ok.
Process= DCRServer
State = Running normally
Pid = 7204
RC = 0
Signo = 0
Start = 10/31/14 14:16:06
Stop = Not applicable
Core = Not applicable
Info = DCRServer is up and running
Process= CMFOGSServer
State = Program started - No mgt msgs received
Pid = 7257
RC = 0
Signo = 0
Start = 10/31/14 14:16:12
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= TISServer
State = Program started - No mgt msgs received
Pid = 7258
RC = 0
Signo = 0
Start = 10/31/14 14:16:12
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= DFMOGSServer
State = Program started - No mgt msgs received
Pid = 7323
RC = 0
Signo = 0
Start = 10/31/14 14:16:16
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= NOSServer
State = Running normally
Pid = 7375
RC = 0
Signo = 0
Start = 10/31/14 14:16:20
Stop = Not applicable
Core = Not applicable
Info = NOSServer is up and running
Process= PTMServer
State = Running normally
Pid = 7376
RC = 0
Signo = 0
Start = 10/31/14 14:16:20
Stop = Not applicable
Core = Not applicable
Info = Started Successfully
Process= InventoryCollector
State = Running normally
Pid = 7377
RC = 0
Signo = 0
Start = 10/31/14 14:16:20
Stop = Not applicable
Core = Not applicable
Info = InventoryCollector is up and running
Process= Interactor
State = Program started - No mgt msgs received
Pid = 7496
RC = 0
Signo = 0
Start = 10/31/14 14:16:24
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= InventoryCollector1
State = Program started - No mgt msgs received
Pid = 7497
RC = 0
Signo = 0
Start = 10/31/14 14:16:24
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= Interactor1
State = Program started - No mgt msgs received
Pid = 7589
RC = 0
Signo = 0
Start = 10/31/14 14:16:28
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= UPMProcess
State = Running normally
Pid = 7590
RC = 0
Signo = 0
Start = 10/31/14 14:16:28
Stop = Not applicable
Core = Not applicable
Info = UPMProcess started successfully.
Process= UTManager
State = Running normally
Pid = 7591
RC = 0
Signo = 0
Start = 10/31/14 14:16:28
Stop = Not applicable
Core = Not applicable
Info = Started.
Process= EssentialsDM
State = Running normally
Pid = 7592
RC = 0
Signo = 0
Start = 10/31/14 14:16:28
Stop = Not applicable
Core = Not applicable
Info = RME Device Management started.
Process= ICServer
State = Running normally
Pid = 7730
RC = 0
Signo = 0
Start = 10/31/14 14:16:31
Stop = Not applicable
Core = Not applicable
Info = ICServer started.
Process= EnergyWise
State = Running normally
Pid = 7923
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = EnergyWise Process is running normally Fri Oct 31 14:16:45 CST 2014
Process= PMCOGSServer
State = Program started - No mgt msgs received
Pid = 7924
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= ConfigMgmtServer
State = Running normally
Pid = 7925
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = DCMA is running normally Fri Oct 31 14:17:02 CST 2014
Process= ConfigUtilityService
State = Running normally
Pid = 7926
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = ConfigUtilityService started.
Process= CAAMServer
State = Running normally
Pid = 7927
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = CAAMServer started.
Process= VNMServer
State = Program started - No mgt msgs received
Pid = 7928
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= WlseUHIC
State = Running normally
Pid = 7929
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = Started.
Process= IPMOGSServer
State = Program started - No mgt msgs received
Pid = 7940
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= TopoServer
State = Program started - No mgt msgs received
Pid = 7941
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= LicenseServer
State = Program started - No mgt msgs received
Pid = 7942
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= NameServer
State = Program started - No mgt msgs received
Pid = 7946
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= NameServiceMonitor
State = Program started - No mgt msgs received
Pid = 8205
RC = 0
Signo = 0
Start = 10/31/14 14:16:39
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= EDS
State = Running normally
Pid = 8290
RC = 0
Signo = 0
Start = 10/31/14 14:16:43
Stop = Not applicable
Core = Not applicable
Info = Initialization complete
Process= ANIServer
State = Running with busy flag set
Pid = 8768
RC = 0
Signo = 0
Start = 10/31/14 14:17:14
Stop = Not applicable
Core = Not applicable
Info = ANIServer started.
Process= UTMajorAcquisition
State = Transient terminated
Pid = 0
RC = 0
Signo = 0
Start = 11/03/14 10:00:00
Stop = 11/03/14 10:14:13
Core = Not applicable
Info = Application started by administrator request.
Process= EDS-GCF
State = Running normally
Pid = 8807
RC = 0
Signo = 0
Start = 10/31/14 14:17:18
Stop = Not applicable
Core = Not applicable
Info = GCF Initialization complete at Fri Oct 31 14:17:53 CST 2014
Process= jrm
State = Running normally
Pid = 8808
RC = 0
Signo = 0
Start = 10/31/14 14:17:18
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= DataPurge
State = Administrator has shut down this server
Pid = 0
RC = 0
Signo = 0
Start = 10/31/14 14:18:12
Stop = 10/31/14 14:19:11
Core = Not applicable
Info = DataPurge initialization completed at Fri Oct 31 14:19:11 CST 2014.
Process= IPMProcess
State = Program started - No mgt msgs received
Pid = 9155
RC = 0
Signo = 0
Start = 10/31/14 14:18:12
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= CTMJrmServer
State = Running normally
Pid = 9156
RC = 0
Signo = 0
Start = 10/31/14 14:18:12
Stop = Not applicable
Core = Not applicable
Info = CTMJrmServer started.
Process= SyslogAnalyzer
State = Running normally
Pid = 9246
RC = 0
Signo = 0
Start = 10/31/14 14:18:23
Stop = Not applicable
Core = Not applicable
Info = SyslogAnalyzerService Started at Fri Oct 31 14:18:35 CST 2014
Process= ChangeAudit
State = Program started - No mgt msgs received
Pid = 9247
RC = 0
Signo = 0
Start = 10/31/14 14:18:23
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= 1014
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 1965
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 1964
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 2360
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 3056
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 3104
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 1001
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 3177
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 3206
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 1015
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 1524
State = Program started - No mgt msgs received
Pid = 21804
RC = 0
Signo = 0
Start = 11/02/14 19:00:00
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= 3306
State = Program started - No mgt msgs received
Pid = 17433
RC = 0
Signo = 0
Start = 11/03/14 11:37:17
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= 1005
State = Running normally
Pid = 19289
RC = 0
Signo = 0
Start = 11/03/14 12:00:00
Stop = Not applicable
Core = Not applicable
Info = 1005 started.
Process= diskWatcher
State = Program started - No mgt msgs received
Pid = 9249
RC = 0
Signo = 0
Start = 10/31/14 14:18:23
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Thanks in advance for your help.
Best regards.Also when i click the alarms bar that is sitting in the bottom right i got these in DFMOGSServer.log
[ Thu Nov 06 15:25:37 CST 2014 ] ERROR com.cisco.nm.xms.ogs.kilner10.KilnerEventConsolidator makeEvent - MAKE CONSOLIDATED_DFMOGS_EVENT: 9 data:
[ Thu Nov 06 15:25:46 CST 2014 ] FATAL com.cisco.nm.xms.ogs.server.OGSServer main - Exception while OGS Server start up: CTMRegistryClient::addNewURNEntry URN : ogs_server_urn ErrMsg : URN already in use
com.cisco.nm.xms.ogs.util.OGSException: CTMRegistryClient::addNewURNEntry URN : ogs_server_urn ErrMsg : URN already in use
at com.cisco.nm.xms.ogs.server.OGSImpl.publishURN(OGSImpl.java:1396)
at com.cisco.nm.xms.ogs.server.OGSServer.main(OGSServer.java:73)
[ Thu Nov 06 15:31:54 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl isUserInTable -
java.lang.NullPointerException
at com.cisco.nm.trx.epm.providers.persistence.ResultSetWrapper.next(Unknown Source)
at com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl.isUserInTable(GroupUserImpl.java:171)
at com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl.processCommand(GroupUserImpl.java:61)
at com.cisco.nm.cuom.eventmon.webapp.AbstractCommandProcessor.execute(AbstractCommandProcessor.java:94)
at com.cisco.nm.cuom.eventmon.webapp.EventMonitoringServlet.doPost(EventMonitoringServlet.java:202)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:637)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:103)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:190)
at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:311)
at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:776)
at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:705)
at org.apache.jk.common.ChannelSocket$SocketConnection.runIt(ChannelSocket.java:898)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:690)
at java.lang.Thread.run(Thread.java:662)
[ Thu Nov 06 15:31:54 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.GroupManager getDevicesForNonOGSGroup - getDevicesForNonOGSGroup() called with Unreachable Devices
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.GroupManager getDevicesForNonOGSGroup - getDevicesForNonOGSGroup() Got 9 devices from TIS
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.GroupManager getDevicesForNonOGSGroup - getDevicesForNonOGSGroup() called with Unmanaged Devices
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.GroupManager getDevicesForNonOGSGroup - getDevicesForNonOGSGroup() called with Suspended Devices
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.GroupManager getDevicesForNonOGSGroup - getDevicesForNonOGSGroup() Got 0 devices from TIS
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl isUserInTable -
java.lang.NullPointerException
at com.cisco.nm.trx.epm.providers.persistence.ResultSetWrapper.next(Unknown Source)
at com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl.isUserInTable(GroupUserImpl.java:171)
at com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl.processCommand(GroupUserImpl.java:61)
at com.cisco.nm.cuom.eventmon.webapp.AbstractCommandProcessor.execute(AbstractCommandProcessor.java:94)
at com.cisco.nm.cuom.eventmon.webapp.EventMonitoringServlet.doPost(EventMonitoringServlet.java:202)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:637)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:103)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:190)
at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:311)
at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:776)
at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:705)
at org.apache.jk.common.ChannelSocket$SocketConnection.runIt(ChannelSocket.java:898)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:690)
at java.lang.Thread.run(Thread.java:662)
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl isUserInTable -
java.lang.NullPointerException
at com.cisco.nm.trx.epm.providers.persistence.ResultSetWrapper.next(Unknown Source)
at com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl.isUserInTable(GroupUserImpl.java:171)
at com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl.processCommand(GroupUserImpl.java:61)
at com.cisco.nm.cuom.eventmon.webapp.AbstractCommandProcessor.execute(AbstractCommandProcessor.java:94)
at com.cisco.nm.cuom.eventmon.webapp.EventMonitoringServlet.doPost(EventMonitoringServlet.java:202)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:637)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:103)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:190)
at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:311)
at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:776)
at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:705)
at org.apache.jk.common.ChannelSocket$SocketConnection.runIt(ChannelSocket.java:898)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:690)
at java.lang.Thread.run(Thread.java:662)
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
Don´t know much about databases, but it seems im missing some important tables or data -
Re: BUG? APEX 4.0: ORA-20503 error editing report with 400+ columns
Hello Everyone.
I've run into something quite strange and am hoping you can help me.
I am using Apex 4.0.1 and Oracle version 10.2.0.5. I've created a "classical" report in which the underlying SQL is a very simple:
select * from pvtabThe Oracle table pvtab consists of 419 columns, all of which are varchar2(88) and number type. That's it.
When I run the report, al of the columns show up as expected.
However, when I go into the "Report Attributes" tab and click on one of the fields (any of them, it doesn't matter which one), I immediately get the following error:
ORA-20503: Current version of data in database has changed since user initiated update process. current checksum = "598CAA7B68746A66F4B99E1512C36DED" application checksum = "0"If if replace the "*" with a few actual column names, then I am able to access any of these columns without problem.
If I put back the "*", I then encounter this error again.
I have never seen this error with other SQL SELECT statements in which I use the "*" qualifier to retrieve all columns from the table.
And so, I am wondering if the error is caused because of the large number of columns (419) in my table.
I've seen this same error mentioned in connection with forms but never with a report.
So, is there some limit to the number of columns one can have in a "classic" or interactive report?
Any idea why I would be getting this error?
Here is the DDL for my table pvtab:
CREATE TABLE "PVTAB"
( "MICRO" VARCHAR2(4),
"PRIM" VARCHAR2(4),
"UNIT" NUMBER,
"SEC_REF_1" NUMBER,
"SECN_1" VARCHAR2(88),
"SEC_REF_2" NUMBER,
"SECN_2" VARCHAR2(88),
"SEC_REF_3" NUMBER,
"SECN_3" VARCHAR2(88),
"SEC_REF_4" NUMBER,
"SECN_4" VARCHAR2(88),
"SEC_REF_5" NUMBER,
"SECN_5" VARCHAR2(88),
"SEC_REF_6" NUMBER,
"SECN_6" VARCHAR2(88),
"SEC_REF_7" NUMBER,
"SECN_7" VARCHAR2(88),
"SEC_REF_8" NUMBER,
"SECN_8" VARCHAR2(88),
"SEC_REF_9" NUMBER,
"SECN_9" VARCHAR2(88),
"SEC_REF_10" NUMBER,
"SECN_10" VARCHAR2(88),
"SEC_REF_11" NUMBER,
"SECN_11" VARCHAR2(88),
"SEC_REF_12" NUMBER,
"SECN_12" VARCHAR2(88),
"SEC_REF_13" NUMBER,
"SECN_13" VARCHAR2(88),
"SEC_REF_14" NUMBER,
"SECN_14" VARCHAR2(88),
"SEC_REF_15" NUMBER,
"SECN_15" VARCHAR2(88),
"SEC_REF_16" NUMBER,
"SECN_16" VARCHAR2(88),
"SEC_REF_17" NUMBER,
"SECN_17" VARCHAR2(88),
"SEC_REF_18" NUMBER,
"SECN_18" VARCHAR2(88),
"SEC_REF_19" NUMBER,
"SECN_19" VARCHAR2(88),
"SEC_REF_20" NUMBER,
"SECN_20" VARCHAR2(88),
"SEC_REF_21" NUMBER,
"SECN_21" VARCHAR2(88),
"SEC_REF_22" NUMBER,
"SECN_22" VARCHAR2(88),
"SEC_REF_23" NUMBER,
"SECN_23" VARCHAR2(88),
"SEC_REF_24" NUMBER,
"SECN_24" VARCHAR2(88),
"SEC_REF_25" NUMBER,
"SECN_25" VARCHAR2(88),
"SEC_REF_26" NUMBER,
"SECN_26" VARCHAR2(88),
"SEC_REF_27" NUMBER,
"SECN_27" VARCHAR2(88),
"SEC_REF_28" NUMBER,
"SECN_28" VARCHAR2(88),
"SEC_REF_29" NUMBER,
"SECN_29" VARCHAR2(88),
"SEC_REF_30" NUMBER,
"SECN_30" VARCHAR2(88),
"SEC_REF_31" NUMBER,
"SECN_31" VARCHAR2(88),
"SEC_REF_32" NUMBER,
"SECN_32" VARCHAR2(88),
"SEC_REF_33" NUMBER,
"SECN_33" VARCHAR2(88),
"SEC_REF_34" NUMBER,
"SECN_34" VARCHAR2(88),
"SEC_REF_35" NUMBER,
"SECN_35" VARCHAR2(88),
"SEC_REF_36" NUMBER,
"SECN_36" VARCHAR2(88),
"SEC_REF_37" NUMBER,
"SECN_37" VARCHAR2(88),
"SEC_REF_38" NUMBER,
"SECN_38" VARCHAR2(88),
"SEC_REF_39" NUMBER,
"SECN_39" VARCHAR2(88),
"SEC_REF_40" NUMBER,
"SECN_40" VARCHAR2(88),
"SEC_REF_41" NUMBER,
"SECN_41" VARCHAR2(88),
"SEC_REF_42" NUMBER,
"SECN_42" VARCHAR2(88),
"SEC_REF_43" NUMBER,
"SECN_43" VARCHAR2(88),
"SEC_REF_44" NUMBER,
"SECN_44" VARCHAR2(88),
"SEC_REF_45" NUMBER,
"SECN_45" VARCHAR2(88),
"SEC_REF_46" NUMBER,
"SECN_46" VARCHAR2(88),
"SEC_REF_47" NUMBER,
"SECN_47" VARCHAR2(88),
"SEC_REF_48" NUMBER,
"SECN_48" VARCHAR2(88),
"SEC_REF_49" NUMBER,
"SECN_49" VARCHAR2(88),
"SEC_REF_50" NUMBER,
"SECN_50" VARCHAR2(88),
"SEC_REF_51" NUMBER,
"SECN_51" VARCHAR2(88),
"SEC_REF_52" NUMBER,
"SECN_52" VARCHAR2(88),
"SEC_REF_53" NUMBER,
"SECN_53" VARCHAR2(88),
"SEC_REF_54" NUMBER,
"SECN_54" VARCHAR2(88),
"SEC_REF_55" NUMBER,
"SECN_55" VARCHAR2(88),
"SEC_REF_56" NUMBER,
"SECN_56" VARCHAR2(88),
"SEC_REF_57" NUMBER,
"SECN_57" VARCHAR2(88),
"SEC_REF_58" NUMBER,
"SECN_58" VARCHAR2(88),
"SEC_REF_59" NUMBER,
"SECN_59" VARCHAR2(88),
"SEC_REF_60" NUMBER,
"SECN_60" VARCHAR2(88),
"SEC_REF_61" NUMBER,
"SECN_61" VARCHAR2(88),
"SEC_REF_62" NUMBER,
"SECN_62" VARCHAR2(88),
"SEC_REF_63" NUMBER,
"SECN_63" VARCHAR2(88),
"SEC_REF_64" NUMBER,
"SECN_64" VARCHAR2(88),
"SEC_REF_65" NUMBER,
"SECN_65" VARCHAR2(88),
"SEC_REF_66" NUMBER,
"SECN_66" VARCHAR2(88),
"SEC_REF_67" NUMBER,
"SECN_67" VARCHAR2(88),
"SEC_REF_68" NUMBER,
"SECN_68" VARCHAR2(88),
"SEC_REF_69" NUMBER,
"SECN_69" VARCHAR2(88),
"SEC_REF_70" NUMBER,
"SECN_70" VARCHAR2(88),
"SEC_REF_71" NUMBER,
"SECN_71" VARCHAR2(88),
"SEC_REF_72" NUMBER,
"SECN_72" VARCHAR2(88),
"SEC_REF_73" NUMBER,
"SECN_73" VARCHAR2(88),
"SEC_REF_74" NUMBER,
"SECN_74" VARCHAR2(88),
"SEC_REF_75" NUMBER,
"SECN_75" VARCHAR2(88),
"SEC_REF_76" NUMBER,
"SECN_76" VARCHAR2(88),
"SEC_REF_77" NUMBER,
"SECN_77" VARCHAR2(88),
"SEC_REF_78" NUMBER,
"SECN_78" VARCHAR2(88),
"SEC_REF_79" NUMBER,
"SECN_79" VARCHAR2(88),
"SEC_REF_80" NUMBER,
"SECN_80" VARCHAR2(88),
"SEC_REF_81" NUMBER,
"SECN_81" VARCHAR2(88),
"SEC_REF_82" NUMBER,
"SECN_82" VARCHAR2(88),
"SEC_REF_83" NUMBER,
"SECN_83" VARCHAR2(88),
"SEC_REF_84" NUMBER,
"SECN_84" VARCHAR2(88),
"SEC_REF_85" NUMBER,
"SECN_85" VARCHAR2(88),
"SEC_REF_86" NUMBER,
"SECN_86" VARCHAR2(88),
"SEC_REF_87" NUMBER,
"SECN_87" VARCHAR2(88),
"SEC_REF_88" NUMBER,
"SECN_88" VARCHAR2(88),
"SEC_REF_89" NUMBER,
"SECN_89" VARCHAR2(88),
"SEC_REF_90" NUMBER,
"SECN_90" VARCHAR2(88),
"SEC_REF_91" NUMBER,
"SECN_91" VARCHAR2(88),
"SEC_REF_92" NUMBER,
"SECN_92" VARCHAR2(88),
"SEC_REF_93" NUMBER,
"SECN_93" VARCHAR2(88),
"SEC_REF_94" NUMBER,
"SECN_94" VARCHAR2(88),
"SEC_REF_95" NUMBER,
"SECN_95" VARCHAR2(88),
"SEC_REF_96" NUMBER,
"SECN_96" VARCHAR2(88),
"SEC_REF_97" NUMBER,
"SECN_97" VARCHAR2(88),
"SEC_REF_98" NUMBER,
"SECN_98" VARCHAR2(88),
"SEC_REF_99" NUMBER,
"SECN_99" VARCHAR2(88),
"SEC_REF_100" NUMBER,
"SECN_100" VARCHAR2(88),
"SEC_REF_101" NUMBER,
"SECN_101" VARCHAR2(88),
"SEC_REF_102" NUMBER,
"SECN_102" VARCHAR2(88),
"SEC_REF_103" NUMBER,
"SECN_103" VARCHAR2(88),
"SEC_REF_104" NUMBER,
"SECN_104" VARCHAR2(88),
"SEC_REF_105" NUMBER,
"SECN_105" VARCHAR2(88),
"SEC_REF_106" NUMBER,
"SECN_106" VARCHAR2(88),
"SEC_REF_107" NUMBER,
"SECN_107" VARCHAR2(88),
"SEC_REF_108" NUMBER,
"SECN_108" VARCHAR2(88),
"SEC_REF_109" NUMBER,
"SECN_109" VARCHAR2(88),
"SEC_REF_110" NUMBER,
"SECN_110" VARCHAR2(88),
"SEC_REF_111" NUMBER,
"SECN_111" VARCHAR2(88),
"SEC_REF_112" NUMBER,
"SECN_112" VARCHAR2(88),
"SEC_REF_113" NUMBER,
"SECN_113" VARCHAR2(88),
"SEC_REF_114" NUMBER,
"SECN_114" VARCHAR2(88),
"SEC_REF_115" NUMBER,
"SECN_115" VARCHAR2(88),
"SEC_REF_116" NUMBER,
"SECN_116" VARCHAR2(88),
"SEC_REF_117" NUMBER,
"SECN_117" VARCHAR2(88),
"SEC_REF_118" NUMBER,
"SECN_118" VARCHAR2(88),
"SEC_REF_119" NUMBER,
"SECN_119" VARCHAR2(88),
"SEC_REF_120" NUMBER,
"SECN_120" VARCHAR2(88),
"SEC_REF_121" NUMBER,
"SECN_121" VARCHAR2(88),
"SEC_REF_122" NUMBER,
"SECN_122" VARCHAR2(88),
"SEC_REF_123" NUMBER,
"SECN_123" VARCHAR2(88),
"SEC_REF_124" NUMBER,
"SECN_124" VARCHAR2(88),
"SEC_REF_125" NUMBER,
"SECN_125" VARCHAR2(88),
"SEC_REF_126" NUMBER,
"SECN_126" VARCHAR2(88),
"SEC_REF_127" NUMBER,
"SECN_127" VARCHAR2(88),
"SEC_REF_128" NUMBER,
"SECN_128" VARCHAR2(88),
"SEC_REF_129" NUMBER,
"SECN_129" VARCHAR2(88),
"SEC_REF_130" NUMBER,
"SECN_130" VARCHAR2(88),
"SEC_REF_131" NUMBER,
"SECN_131" VARCHAR2(88),
"SEC_REF_132" NUMBER,
"SECN_132" VARCHAR2(88),
"SEC_REF_133" NUMBER,
"SECN_133" VARCHAR2(88),
"SEC_REF_134" NUMBER,
"SECN_134" VARCHAR2(88),
"SEC_REF_135" NUMBER,
"SECN_135" VARCHAR2(88),
"SEC_REF_136" NUMBER,
"SECN_136" VARCHAR2(88),
"SEC_REF_137" NUMBER,
"SECN_137" VARCHAR2(88),
"SEC_REF_138" NUMBER,
"SECN_138" VARCHAR2(88),
"SEC_REF_139" NUMBER,
"SECN_139" VARCHAR2(88),
"SEC_REF_140" NUMBER,
"SECN_140" VARCHAR2(88),
"SEC_REF_141" NUMBER,
"SECN_141" VARCHAR2(88),
"SEC_REF_142" NUMBER,
"SECN_142" VARCHAR2(88),
"SEC_REF_143" NUMBER,
"SECN_143" VARCHAR2(88),
"SEC_REF_144" NUMBER,
"SECN_144" VARCHAR2(88),
"SEC_REF_145" NUMBER,
"SECN_145" VARCHAR2(88),
"SEC_REF_146" NUMBER,
"SECN_146" VARCHAR2(88),
"SEC_REF_147" NUMBER,
"SECN_147" VARCHAR2(88),
"SEC_REF_148" NUMBER,
"SECN_148" VARCHAR2(88),
"SEC_REF_149" NUMBER,
"SECN_149" VARCHAR2(88),
"SEC_REF_150" NUMBER,
"SECN_150" VARCHAR2(88),
"SEC_REF_151" NUMBER,
"SECN_151" VARCHAR2(88),
"SEC_REF_152" NUMBER,
"SECN_152" VARCHAR2(88),
"SEC_REF_153" NUMBER,
"SECN_153" VARCHAR2(88),
"SEC_REF_154" NUMBER,
"SECN_154" VARCHAR2(88),
"SEC_REF_155" NUMBER,
"SECN_155" VARCHAR2(88),
"SEC_REF_156" NUMBER,
"SECN_156" VARCHAR2(88),
"SEC_REF_157" NUMBER,
"SECN_157" VARCHAR2(88),
"SEC_REF_158" NUMBER,
"SECN_158" VARCHAR2(88),
"SEC_REF_159" NUMBER,
"SECN_159" VARCHAR2(88),
"SEC_REF_160" NUMBER,
"SECN_160" VARCHAR2(88),
"SEC_REF_161" NUMBER,
"SECN_161" VARCHAR2(88),
"SEC_REF_162" NUMBER,
"SECN_162" VARCHAR2(88),
"SEC_REF_163" NUMBER,
"SECN_163" VARCHAR2(88),
"SEC_REF_164" NUMBER,
"SECN_164" VARCHAR2(88),
"SEC_REF_165" NUMBER,
"SECN_165" VARCHAR2(88),
"SEC_REF_166" NUMBER,
"SECN_166" VARCHAR2(88),
"SEC_REF_167" NUMBER,
"SECN_167" VARCHAR2(88),
"SEC_REF_168" NUMBER,
"SECN_168" VARCHAR2(88),
"SEC_REF_169" NUMBER,
"SECN_169" VARCHAR2(88),
"SEC_REF_170" NUMBER,
"SECN_170" VARCHAR2(88),
"SEC_REF_171" NUMBER,
"SECN_171" VARCHAR2(88),
"SEC_REF_172" NUMBER,
"SECN_172" VARCHAR2(88),
"SEC_REF_173" NUMBER,
"SECN_173" VARCHAR2(88),
"SEC_REF_174" NUMBER,
"SECN_174" VARCHAR2(88),
"SEC_REF_175" NUMBER,
"SECN_175" VARCHAR2(88),
"SEC_REF_176" NUMBER,
"SECN_176" VARCHAR2(88),
"SEC_REF_177" NUMBER,
"SECN_177" VARCHAR2(88),
"SEC_REF_178" NUMBER,
"SECN_178" VARCHAR2(88),
"SEC_REF_179" NUMBER,
"SECN_179" VARCHAR2(88),
"SEC_REF_180" NUMBER,
"SECN_180" VARCHAR2(88),
"SEC_REF_181" NUMBER,
"SECN_181" VARCHAR2(88),
"SEC_REF_182" NUMBER,
"SECN_182" VARCHAR2(88),
"SEC_REF_183" NUMBER,
"SECN_183" VARCHAR2(88),
"SEC_REF_184" NUMBER,
"SECN_184" VARCHAR2(88),
"SEC_REF_185" NUMBER,
"SECN_185" VARCHAR2(88),
"SEC_REF_186" NUMBER,
"SECN_186" VARCHAR2(88),
"SEC_REF_187" NUMBER,
"SECN_187" VARCHAR2(88),
"SEC_REF_188" NUMBER,
"SECN_188" VARCHAR2(88),
"SEC_REF_189" NUMBER,
"SECN_189" VARCHAR2(88),
"SEC_REF_190" NUMBER,
"SECN_190" VARCHAR2(88),
"SEC_REF_191" NUMBER,
"SECN_191" VARCHAR2(88),
"SEC_REF_192" NUMBER,
"SECN_192" VARCHAR2(88),
"SEC_REF_193" NUMBER,
"SECN_193" VARCHAR2(88),
"SEC_REF_194" NUMBER,
"SECN_194" VARCHAR2(88),
"SEC_REF_195" NUMBER,
"SECN_195" VARCHAR2(88),
"SEC_REF_196" NUMBER,
"SECN_196" VARCHAR2(88),
"SEC_REF_197" NUMBER,
"SECN_197" VARCHAR2(88),
"SEC_REF_198" NUMBER,
"SECN_198" VARCHAR2(88),
"SEC_REF_199" NUMBER,
"SECN_199" VARCHAR2(88),
"SEC_REF_200" NUMBER,
"SECN_200" VARCHAR2(88),
"SEC_REF_201" NUMBER,
"SECN_201" VARCHAR2(88),
"SEC_REF_202" NUMBER,
"SECN_202" VARCHAR2(88),
"SEC_REF_203" NUMBER,
"SECN_203" VARCHAR2(88),
"SEC_REF_204" NUMBER,
"SECN_204" VARCHAR2(88),
"SEC_REF_205" NUMBER,
"SECN_205" VARCHAR2(88),
"SEC_REF_206" NUMBER,
"SECN_206" VARCHAR2(88),
"SEC_REF_207" NUMBER,
"SECN_207" VARCHAR2(88),
"SEC_REF_208" NUMBER,
"SECN_208" VARCHAR2(88)
);Thank you for any help/advice.
Elie
Edited by: EEG on Jun 12, 2011 2:09 PMSo, is there some limit to the number of columns one can have in a "classic" or interactive report?Yes. See Oracle® Application Express Application Builder User's Guide Release 4.0, Appendix B: Oracle Application Express Limits.
Any idea why I would be getting this error?No, but I've replicated it in APEX 4.0.2.00.07 on 11.2.0.1.0 EE using a table of 420 <tt>varchar2(88)</tt> columns:
>
ORA-20503: Current version of data in database has changed since user initiated update process. current checksum = "50C9BDC0AA1AEF0EB272E9158B2117B4" application checksum = "0"
>
Happens whether using <tt>select *</tt> or including all column names in the query. (I know you don't want to type all the column names, but I'd never use <tt>select *</tt> in a production application: always use a proper column list. You can get one without typing by drag-and-drop of a table in most IDEs, or a query from <tt>user_tab_columns</tt>.)
I hit the problem at 274 columns. Such an arbitrary number leads me to think that the problem is not one of the number of columns per se, but is due to some other limit (possibly a 32K VARCHAR2/RAW buffer somewhere).
Workaround:
Updates to the report column attributes are actually being saved, and you can navigate them using the Page Definition tree view as described in Appendix B.
Getting More Help:
This is probably a bug. If you have a support agreement with Oracle raise an SR with Oracle Support.
Also:
<li>Search the forum using the "ORA-20503" code and other possible terms to see if there's anything relevant. I had a quick look but the only thread in this context recommended an upgrade on an Oracle 9 DB version that's not compatible with APEX 4.0.
<li>To get the attention of the Oracle APEX team or anyone else who may know more about this problem than we do, edit your original post and change the Subject to be more specific about the actual nature of the problem: <em>BUG? APEX 4.0: ORA-20503 error editing report with 400+ columns</em>, and include your database version/edition and the definition of the <tt>PVTAB</tt> table.
Finally:
Somebody's bound to ask, so we might as well get started:
<li>Why so many columns?
<li>What requirement is this trying to fulfil? -
Could not create pool connection with MySql
When starting weblogic server I obtain the following error message when the conection
pool for a MySql database should be established. What's the mistake I am doing? #The
examples in the weblogic.properties put a "server=DEMO to the props. What is this
server related to the MySql RDBMS? Is it mandatory? After the error message produced
by Weblogic you'll find some information about the MySql setup (my.ini) I have made.
Mi Mai 01 01:33:50 CEST 2002:<I> <WebLogicServer> Invoking main-style startup weblogic.jdbc.common.internal.JdbcStartup
weblogic.jdbc.common.internal.JdbcStartup
Mi Mai 01 01:33:50 CEST 2002:<I> <JDBC Pool> Creating connection pool ejbTestPool
with:
{aclName=weblogic.jdbc.connectionPool.ejbTestPool, maxCapacity=2, initialCapacity=1,
url=jdbc:mysql://Blizzard:3306/ejbTest, props=user=du-it;password=du-it;server=3.23.4
9-nt, capacityIncrement=1, driver=org.gjt.mm.mysql.Driver, poolName=ejbTestPool}
Mi Mai 01 01:33:50 CEST 2002:<I> <JDBC Pool> Sleeping in createResource()
Mi Mai 01 01:33:51 CEST 2002:<E> <JDBC Pool> Failed to create connection pool "ejbTes
tPool"
weblogic.common.ResourceException: weblogic.common.ResourceException:
Could not create pool connection. The DBMS driver exception was:
java.sql.SQLException: Invalid authorization specification: Access denied for user:
du-it@blizzard' (Using password: YES)
at org.gjt.mm.mysql.MysqlIO.init(MysqlIO.java:278)
at org.gjt.mm.mysql.Connection.<init>(Connection.java:230)
at org.gjt.mm.mysql.Driver.connect(Driver.java:126)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Connecti
onEnvFactory.java:146)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Connecti
onEnvFactory.java:108)
at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator
.java:771)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java:4
16)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:3
30)
at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java:117)
at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java:109)
at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Connecti
onEnvFactory.java:154)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Connecti
onEnvFactory.java:108)
at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator
.java:771)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java:4
16)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:3
30)
at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java:117)
at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java:109)
at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Connecti
onEnvFactory.java:124)
at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator
.java:771)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java:4
16)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:3
30)
at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java:117)
at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java:109)
at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)
MySql:
#This File was made using the WinMySQLAdmin 1.4 Tool
#29.04.2002 14:46:57
#Uncomment or Add only the keys that you know how works.
#Read the MySQL Manual for instructions
[mysqld]
basedir=D:/db/mysql
#bind-address=169.254.102.136
datadir=D:/db/mysql/data
#anguage=D:/db/mysql/share/german
#slow query log#=
#tmpdir#=
port=3306
#set-variable=key_buffer=16M
[WinMySQLadmin]
Server=D:/db/mysql/bin/mysqld-nt.exe
user=du-it
password=du-itWhen starting weblogic server I obtain the following error message when the conection
pool for a MySql database should be established. What's the mistake I am doing? #The
examples in the weblogic.properties put a "server=DEMO to the props. What is this
server related to the MySql RDBMS? Is it mandatory? After the error message produced
by Weblogic you'll find some information about the MySql setup (my.ini) I have made.
Mi Mai 01 01:33:50 CEST 2002:<I> <WebLogicServer> Invoking main-style startup weblogic.jdbc.common.internal.JdbcStartup
weblogic.jdbc.common.internal.JdbcStartup
Mi Mai 01 01:33:50 CEST 2002:<I> <JDBC Pool> Creating connection pool ejbTestPool
with:
{aclName=weblogic.jdbc.connectionPool.ejbTestPool, maxCapacity=2, initialCapacity=1,
url=jdbc:mysql://Blizzard:3306/ejbTest, props=user=du-it;password=du-it;server=3.23.4
9-nt, capacityIncrement=1, driver=org.gjt.mm.mysql.Driver, poolName=ejbTestPool}
Mi Mai 01 01:33:50 CEST 2002:<I> <JDBC Pool> Sleeping in createResource()
Mi Mai 01 01:33:51 CEST 2002:<E> <JDBC Pool> Failed to create connection pool "ejbTes
tPool"
weblogic.common.ResourceException: weblogic.common.ResourceException:
Could not create pool connection. The DBMS driver exception was:
java.sql.SQLException: Invalid authorization specification: Access denied for user:
du-it@blizzard' (Using password: YES)
at org.gjt.mm.mysql.MysqlIO.init(MysqlIO.java:278)
at org.gjt.mm.mysql.Connection.<init>(Connection.java:230)
at org.gjt.mm.mysql.Driver.connect(Driver.java:126)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Connecti
onEnvFactory.java:146)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Connecti
onEnvFactory.java:108)
at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator
.java:771)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java:4
16)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:3
30)
at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java:117)
at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java:109)
at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Connecti
onEnvFactory.java:154)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Connecti
onEnvFactory.java:108)
at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator
.java:771)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java:4
16)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:3
30)
at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java:117)
at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java:109)
at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Connecti
onEnvFactory.java:124)
at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator
.java:771)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java:4
16)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:3
30)
at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java:117)
at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java:109)
at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)
MySql:
#This File was made using the WinMySQLAdmin 1.4 Tool
#29.04.2002 14:46:57
#Uncomment or Add only the keys that you know how works.
#Read the MySQL Manual for instructions
[mysqld]
basedir=D:/db/mysql
#bind-address=169.254.102.136
datadir=D:/db/mysql/data
#anguage=D:/db/mysql/share/german
#slow query log#=
#tmpdir#=
port=3306
#set-variable=key_buffer=16M
[WinMySQLadmin]
Server=D:/db/mysql/bin/mysqld-nt.exe
user=du-it
password=du-it -
Broadcast - ERROR max no of 100 conversations exceeded
We've scheduled 3 reports to email PDF's to approx 400 users but the BEx broadcaster only managed to send out about 80 emails. in the various logs and traces I can see and error that states "ERROR max no of 100 conversations exceeded".
I can find various notes about this refering to various sytstem parameters but as far as I can tell our parametrs are set correctly e.g.
gw/max_conn 500
gw/max_sys 300
gw/max_overflow_size 10000000
gw/max_shm_req 50
rdisp/tm_max_no 200
rdisp/max_comm_entries 500
As I understand it from the notes we should increase the environment variable CPIC_MAX_CONV. However the note I'm looking at (316877) states that this environment variable is on the ITS server but from talking to our Basis support the version of netweaver we are running doesnt have an ITS server?? Dont really know what all that means. Any ideas on that one or about the error message as a whole would be greatly appreciated.
If it's any help I can also see in SM21 that at the time of broadcasting the users got the error:
> Conversation ID: 33568780
> CPI-C function: CMSEND(SAP)
Communication error, CPIC return code 017, SAP return code 450
Thren in the broadcast log via RSRD_LOG the users have the error:
Java communication error: Error when opening an RFC connection RSBOLAP017
ThanksHi,
Try using these threads, if you get some help from them.
/thread/174978 [original link is broken]
RFC_ERROR_COMMUNICATION--max no of 100 conversation exceeded
AI_DIRECTORY_JCOSERVER - ConnTest issue Error "max no of 100 conversation" -
CPIC_MAX_CONV - ERROR max no of 100 conversations exceeded
I recvd the "ERROR max no of 100 conversations exceeded" and I could resolve it by setting the environment variable CPIC_MAX_CONV to a higher value for my <sid>adm per note 316877.
What I want to know is where can i check to see if this environment variable actually took effect WITHIN IN SAP (I can see it set in env and when I echo the variable) ? Can I see this anywhere within the SAP land ... in its server logs , property files etc ?
Also in general when we make changes to environment variables at the OS level pertinent to SAP then where within SAP does this get absorbed and where I can see the new values.
Pls advise.
thank you
regards
LaxmiHi Laxmi,
Please check the below thread. I have given a possible solution in the thread.
Tcode SLDCHECK error
Cheers...,
Raghu -
ERROR:max no of 100 conversations exceeded
Dear All,
I m tring to comfigure SAP XI(2004sr2) in 2nd step of SLD system : Connect SLD TO SEN (if CEN Present). I m getting following error
Element 'BAPI_SLD_SUPPLIER_CONFIG_SET':Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=XIDEV SYSNR=00 GWHOST=XIDEV GWSERV=sapgw00 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR max no of 100 conversations exceeded
TIME Fri May 08 14:58:46 2009
RELEASE 700
COMPONENT CPIC (TCP/IP) with Unicode
VERSION 3
RC 466
MODULE r3cpic.c
LINE 10713
COUNTER 1
Element 'SAPDEMO.XID.Backend.Unclassified':!AbapConfigurationWriter.FM_CALL!BAPI_SLD_SUPPLIER_CONFIG_SET!AbapConfigurationWriter.FAILED!
Regards,
HitenHi Hiten,
Make sure that you have set the parameter CPIC_MAX_CONV under Environment variables --> system Variables.
For XI, the recommended value for this parameter is 400.
Regards,
Gopinathan. -
Error in filter with SQL Expression
HI Experts,
I have a sql query which works fine, but have to_date funtion() in the where clause as below :
and oe.ORDERED_DATE BETWEEN to_date('09-APR-2009 23:59:59','DD-MON-YYYY HH24:MI:SS')
AND to_date('10-APR-2009 23:59:59','DD-MON-YYYY HH24:MI:SS')
and (ol.ORDERED_ITEM LIKE 'abckdo%' OR ol.ORDERED_ITEM LIKE 'xysalnb%')
I am trying to create an OBIEE report with filter where the values of the filter are select as SQL Expression. and gave value to first variable as "to_date('09-APR-2009 23:59:59','DD-MON-YYYY HH24:MI:SS')" and the second variable as " to_date('10-APR-2009 23:59:59','DD-MON-YYYY HH24:MI:SS')"
But the report is giving me an error. If I remove the date condition, then the report works fine. Can anyone give some inputs in resolving the problem. The mentioning of the HH24:MI:SS is very import to get the right resultset.
Thanks in Advance.
svrHi SVR,
I've had similar difficulties in the past with OBIEE and using the TO_DATE in the logical SQL expressions. I'm not sure if OBIEE recognizes TO_DATE or if it only recognizes TO_DATE is certain situations.
However, I believe OBIEE recognizes the CAST( AS DATE) in all situations. Here's what I would recommend doing.
1) Go into the connection pool associated with the report your creating and click on the second tab, "Connection Scripts"
2) In the "Execute on Connect" area, click the "New" button and paste the following code: alter session set NLS_DATE_FORMAT='DD-MON-YYYY HH24:MI:SS' ** this step changes the default DD-MON-YYYY format of Oracle, to the format you will be giving the data in.
3) Save the RPD and bounce the services if you made this change off-line.
4) Instead of using TO_DATE() on your formulas, use CAST('09-APR-2009 23:59:59' AS DATE). Since we changed the default DATE mask to be the format that you're passing in, you should no longer see any issues.
Hope that helps!
-Joe -
DynamicStreamingResource and Error: Playback failed with certain media
I'm running into an issue with a DynamicStreamingResource wherein, with certain media, I receive a Playback failed error after about 20 seconds of playback. The error does not appear with these assets, which play back perfectly:
_dynamicStreamingResource = new DynamicStreamingResource("rtmp://cp67126.edgefcs.net/ondemand");
_dynamicStreamingResource.streamItems = Vector.<DynamicStreamingItem>(
[ new DynamicStreamingItem("mp4:mediapm/ovp/content/demo/video/elephants_dream/elephants_dream_ 768x428_24.0fps_408kbps.mp4", 408, 768, 428)
, new DynamicStreamingItem("mp4:mediapm/ovp/content/demo/video/elephants_dream/elephants_dream_ 768x428_24.0fps_608kbps.mp4", 608, 768, 428)
, new DynamicStreamingItem("mp4:mediapm/ovp/content/demo/video/elephants_dream/elephants_dream_ 1024x522_24.0fps_908kbps.mp4", 908, 1024, 522)
, new DynamicStreamingItem("mp4:mediapm/ovp/content/demo/video/elephants_dream/elephants_dream_ 1024x522_24.0fps_1308kbps.mp4", 1308, 1024, 522)
, new DynamicStreamingItem("mp4:mediapm/ovp/content/demo/video/elephants_dream/elephants_dream_ 1280x720_24.0fps_1708kbps.mp4", 1708, 1280, 720)
However this set of assets do not work:
_dynamicStreamingResource = new DynamicStreamingResource("rtmp://flashstream.adobe.com/ondemand");
_dynamicStreamingResource.streamItems = Vector.<DynamicStreamingItem>(
[ new DynamicStreamingItem("mp4:flash/m/mv1/acom/connectnow/flvs/acom014_854x480.flv", 408, 854, 480)
, new DynamicStreamingItem("mp4:flash/m/mv2/acom/connectnow/flvs/acom014_854x480.flv", 608, 854, 480)
, new DynamicStreamingItem("mp4:flash/m/mv3/acom/connectnow/flvs/acom014_854x480.flv", 908, 854, 480)
I've confirmed that each asset individually plays as desired, which they do.
Additionally, I have noticed that the buffer grows at an awkward rate - it jumps to about 10 seconds, stutters back and forth between 15 and 20, then stalls, and eventually jumps to 40 seconds, at which point the playhead, around 20 seconds, stalls and I receive the Playback failed error. This happens 100% of the time.
Any thoughts as to why the second set is problematic?
Thanks!I'm getting "NetStream.Play.StreamNotFound" when I try to play your first stream so I'm not able to investigate this. Here are some things to look at:
The bitrate you give to DynamicStreamingItem is very important. It must be accurate with regard to the encode. The switching rules use this value to throttle the connection between client and server to keep the buffer from growing too large. Make sure your encodes are CBR and not VBR (variable bitrate). Make sure all encodes have the same keyframe interval. Make sure you set your buffer to 8 seconds initially to get this working. You can adjust if you wish.
Also, turn logging on and start digging through the logs. Determine which stream playback is failing on. The next thing I would try is put the bitrate in the stream name and put them in the same location on the server rather than different paths for each bitrate.
Thanks,
- charles -
Error when working with TableView using JCA
Hi sdns,
I am getting an iview rutnime error when working with Tableview using JCA. Here i am putting all my code, go thorugh it and tell me if any error is there.One more thing is Usermappping and all properties are set to system object.
Now you can throught he code which is followed by error also.
<u>Java file.</u>
public class DisplayComponent extends PageProcessorComponent {
public DynPage getPage() {
return new DisplayComponentDynPage();
public static class DisplayComponentDynPage extends JSPDynPage {
private JCATviewBean bean;
public void doInitialization() {
IPortalComponentProfile profile =
((IPortalComponentRequest) getRequest())
.getComponentContext()
.getProfile();
Object o = profile.getValue("myBean");
if (o == null || !(o instanceof JCATviewBean)) {
bean = new JCATviewBean();
profile.putValue("myBean", bean);
} else {
bean = (JCATviewBean) o;
// fill your bean with data here...
IPortalComponentRequest request =
(IPortalComponentRequest) this.getRequest();
doJca(request);
public void doProcessAfterInput() throws PageException {
public void doProcessBeforeOutput() throws PageException {
this.setJspName("Report.jsp");
private IConnection getConnection(
IPortalComponentRequest request,
String alias)
throws Exception {
IConnectorGatewayService cgService =
(IConnectorGatewayService) PortalRuntime
.getRuntimeResources()
.getService(
IConnectorService.KEY);
ConnectionProperties prop =
new ConnectionProperties(
request.getLocale(),
request.getUser());
return cgService.getConnection(alias, prop);
public void doJca(IPortalComponentRequest request) {
IConnectionFactory connectionFactory = null;
IConnection client = null;
String rfm_name = "BAPI_COMPANYCODE_GETLIST";
try {
try {
// pass the request & system alias
// Change the alias to whatever the alias is for your R/3 system
client = getConnection(request, "MyIDES");
} catch (Exception e) {
System.out.println(
"Couldn't establish a connection with a target system.");
return;
Start Interaction
IInteraction interaction = client.createInteractionEx();
IInteractionSpec interactionSpec =
interaction.getInteractionSpec();
interactionSpec.setPropertyValue("Name", rfm_name);
CCI api only has one datatype: Record
RecordFactory recordFactory = interaction.getRecordFactory();
MappedRecord importParams =
recordFactory.createMappedRecord(
"CONTAINER_OF_IMPORT_PARAMS");
IFunctionsMetaData functionsMetaData =
client.getFunctionsMetaData();
IFunction function = functionsMetaData.getFunction(rfm_name);
if (function == null) {
System.out.println(
"Couldn't find " + rfm_name + " in a target system.");
return;
How to invoke Function modules
System.out.println("Invoking... " + function.getName());
MappedRecord exportParams =
(MappedRecord) interaction.execute(
interactionSpec,
importParams);
How to get structure values
IRecord exportStructure = (IRecord) exportParams.get("RETURN");
String columnOne = exportStructure.getString("TYPE");
String columnTwo = exportStructure.getString("CODE");
String columnThree = exportStructure.getString("MESSAGE");
System.out.println(" RETURN-TYPE = " + columnOne);
System.out.println(" RETURN-CODE = " + columnTwo);
System.out.println(" RETURN-MESSAGE =" + columnThree);
How to get table values
IRecordSet exportTable =
(IRecordSet) exportParams.get("COMPANYCODE_LIST");
exportTable.beforeFirst();
// Moves the cursor before the first row.
while (exportTable.next()) {
String column_1 = exportTable.getString("COMP_CODE");
String column_2 = exportTable.getString("COMP_NAME");
System.out.println(
" COMPANYCODE_LIST-COMP_CODE = " + column_1);
System.out.println(
" COMPANYCODE_LIST-COMP_NAME = " + column_2);
// create the tableview mode in the bean
bean.createData(exportTable);
Closing the connection
client.close();
} catch (ConnectorException e) {
// app.putValue("error", e);
System.out.println("Caught an exception: \n" + e);
} catch (Exception e) {
System.out.println("Caught an exception: \n" + e);
<u>Bena file</u>
package com.sap.JCA.bean;
import java.util.Vector;
import com.sapportals.connector.execution.structures.IRecordSet;
import com.sapportals.htmlb.table.DefaultTableViewModel;
import com.sapportals.htmlb.table.TableViewModel;
public class JCATviewBean {
public DefaultTableViewModel model;
public TableViewModel getModel() {
return this.model;
public void setModel(DefaultTableViewModel model) {
this.model = model;
public void createData(IRecordSet table) {
// this is your column names
Vector column = new Vector();
column.addElement("Company Code");
column.addElement("Company Name");
// all this logic is for the data part.
Vector rVector = new Vector();
try {
table.beforeFirst();
while (table.next()) {
Vector data = new Vector();
data.addElement(table.getString("COMP_CODE"));
data.addElement(table.getString("COMP_NAME"));
rVector.addElement(data);
} catch (Exception e) {
e.printStackTrace();
// this is where you create the model
this.setModel(new DefaultTableViewModel(rVector, column));
<b>JSP File:</b>
<%@ taglib uri="tagLib" prefix="hbj" %>
<jsp:useBean id="myBean" scope="application" class="com.sap.JCA.bean.JCATviewBean" />
<hbj:content id="myContext" >
<hbj:page title="PageTitle">
<hbj:form id="myFormId" >
<br>
<hbj:textView id = "tv1" text = "<b>TableView Example Using JCA</b> <br>"/>
<hbj:tableView
id="myTableView1"
model="myBean.model"
design="ALTERNATING"
headerVisible="true"
footerVisible="true"
fillUpEmptyRows="true"
navigationMode="BYLINE"
selectionMode="MULTISELECT"
headerText="TableView example1"
visibleFirstRow="1"
visibleRowCount="30"
width="500 px"
/>
</hbj:form>
</hbj:page>
</hbj:content>
<b>Error when Executing this component:</b><u></u>
Portal Runtime Error
<b>An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
com/sapportals/portal/htmlb/page/PageProcessorComponent.
Exception id: 12:21_28/10/05_0173_94105150
See the details for the exception ID in the log file</b>
If anybody find the error please reply to this post.
Regards,
sireesha.Thanks for your response Martin,
I have already seen the log file but im couldn't findout anything from that since it is so long here im putting some part of please see this.if u able to find it clarify me,
<b>Here the log file:</b>
1.5#001321FD6213005D0000907100001CB000040419258FBF4E#1130405957843#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
#1.5#001321FD6213005D0000907200001CB00004041925916735#1130405957953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
#1.5#001321FD6213005D0000907300001CB0000404192591688D#1130405957953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job#
#1.5#001321FD621300650000120E00001CB00004041925C953D7#1130405961625#com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory##com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory.XIManagedConnectionFactoryController.run()######04d7f690469311da8d52001321fd6213#Thread[Thread-114,5,SAPEngine_System_Thread[impl:5]_Group]##0#0#Debug#1#/Applications/ExchangeInfrastructure/AdapterFramework/ThirdPartyRoot/comsap/Server/Adapter Framework#Java###MCF with GUID is running. (,)#3#964bfca0444711dabb51001321fd6213#com.sap.engine.services.deploy.server.ApplicationLoader@1586c77#964bfca0444711dabb51001321fd6213#
#1.5#001321FD6213005D0000907400001CB000040419275B24FC#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###within the infinite of the Scheduler Thread#
#1.5#001321FD6213005D0000907500001CB000040419275B25D9#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
#1.5#001321FD6213005D0000907600001CB000040419275B2E27#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
#1.5#001321FD6213005D0000907700001CB000040419275B2EFA#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job#
#1.5#001321FD6213005D0000907800001CB0000404192924ED59#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###within the infinite of the Scheduler Thread#
#1.5#001321FD6213005D0000907900001CB0000404192924EE36#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
#1.5#001321FD6213005D0000907A00001CB0000404192924F652#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
#1.5#001321FD6213005D0000907B00001CB0000404192924F710#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job#
#1.5#001321FD621300650000120F00001CB000040419295CCD8B#1130406021625#com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory##com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory.XIManagedConnectionFactoryController.run()######04d7f690469311da8d52001321fd6213#Thread[Thread-114,5,SAPEngine_System_Thread[impl:5]_Group]##0#0#Debug#1#/Applications/ExchangeInfrastructure/AdapterFramework/ThirdPartyRoot/comsap/Server/Adapter Framework#Java###MCF with GUID is running. (,)#3#964bfca0444711dabb51001321fd6213#com.sap.engine.services.deploy.server.ApplicationLoader@1586c77#964bfca0444711dabb51001321fd6213#
#1.5#001321FD6213005D0000907C00001CB0000404192AEEB1E2#1130406047953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###within the infinite of the Scheduler Thread#
#1.5#001321FD6213005D0000907D00001CB0000404192AEEB2C0#1130406047953#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
#1.5#001321FD6213005D0000907E00001CB0000404192AEEBAD8#1130406047968#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
#1.5#001321FD6213005D0000907F00001CB0000404192AEEBB9E#1130406047968#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job# -
How to throw a program with two threads?
Hello to everybody!
I'm using jdk 1.1.8 and I need to throw a program, and while this is running., i would show an image,
I have tried with 2 threads, but the image only is shown when the program is thrown, but not while,
Thanks in advance,
SilviaHave you done something like:
a) create a Window with your Panel and image on it, display the Window
b) fork off a thread that launches your app
c) when the thread is finished launching the app, kill the splash window
Window splash= new YourSplashWindow(...);
splash.show(); // display your splash screen
YourLauncherRunnable launch = new YourLauncherRunnable(splash);
new Thread(launch).start(); // start a new thread to launch your app
// loop until the launcher thread tells the window to die
while(!splash.shouldStop())
Thread.sleep(100);
// kill the window
splash.dispose();
class YourSplashWindow extends Window
public boolean shouldStop() {return Stop;}
boolean Stop = false;
public YourSplashWindow()
// set up the window here...
setBounds(...); // sets pos and size
public void killWindow()
Stop = true;
class YourLauncherRunnable implements Runnable
YourSplashWindow Win = null;
public YourLauncherRunnable(YourSplashWindow w)
Win = w;
public void run()
// do your launching here....
// done launching the program, kill the splash window
Win.killWindow();
}
Maybe you are looking for
-
How do I transfer my music library from a PC to my Mac book Pro?
How do I transfer NON purchased music in My library on my PC to my MacBook Pro?thanks
-
I can't get a login ID and password to work for Mozilla Support
I may have just solved it. It involved confusing username and E-Mail address assuming they were the same
-
Does it support 3D TVs?
-
Accomodate tax package codes in Asset master record
Hello Gurus, We are in process of doing conversion from legacy to SAP for one of the division. This division are maintaining tax package codes in legacy information and want to maintain in SAP system for reporting purpose.All of Evaluation group
-
Hi - so recently EE had a promotion whereby they were providing free tablets to those who signed up for their fiber service. I happen to be one of those customers and I happen to be seemingly among the many who have yet to recieve the good. For infor