Error Printing in Client App ZEBRA TLP 2824
Hi, thank you for reading this, I been looking literally for 8 days now for over 18 hrs, and I can not find the solution. Please help me.
I created a project on Visual Studio 2005. Within the project there is one report that prints fine on my local machine but when I move it to the client the page is not passing with the right dimensions. It is very strange. I'm using a Zebra Printer TLP 2824 page size 2.25 x .75 no margins.
I have tested several scenarios and many settings. It prints on the client but only 1.25";; on the width (the height prints fine)
The estrange part is that if I place a box object, it will print on the 2.25";; width but if I place any text bound or unbound it will only print 1.25";; to the left.
I use this code on the click event:
Dim report As New ReportDocument()
report.Load("C:\Program Files\TEST\Install\Test2.rpt";;)
Dim margins As PageMargins = report.PrintOptions.PageMargins
margins.bottomMargin = 0
margins.leftMargin = 0
margins.rightMargin = 0
margins.topMargin = 0
report.PrintOptions.ApplyPageMargins(margins)
report.PrintOptions.PrinterName = "Zebra TLP2824"
report.PrintToPrinter(1, True, 0, 0)
report.Close()
I tried direct print with the above code and also using a viewer on a form. Using a viewer I can see it well on my PC but again on the client I can only see a page of about 1.25";; x 1.25"; (but still the whole box object prints on the 2.25";; width and with the right height) just the text is being cut out or something by the width.
The software installed on the client PC are the generated by the build:
Net 2.0 SP 1
Microsoft Report Viewer Redistributable 2005
Crystal Reports for Net 2.0 (x86) v 10.2.0
On my PC I'm using (Installed by Visual Studio 2005 Professional):
Net 3.5
Crystal Reports XI Release 2 .NET 2005 Server
Could this be the problem? How do I get updates for my client PCs?
Any help will be really appreciated.
In advance, Thank you.
Edited by: CS-LEV on Jan 8, 2010 2:15 AM ZEBRA TLP 2824 added.
Hello,
The other issue is the Framework. CR XI R2 has a dependency on the 1.1. and 2.0 frameworks for printing, we use the framework printer functionality.
Search this forums for deploying issues, lots of posting to help you.
Thank you
Don
Similar Messages
-
Using Java Script and Zebra TLP 2824- Z
Hi Friends,
I have a label printer TLP 2844-Z.
And i want to give the details of label through javascript.
and if i press the print button the printout should come is there any possibilities friends.
The code for label is .
"^XA"
"^PW406"
"^FT320,96^XG000.GRF,1,1^FS" );
"^FT119,595^A0B,39,38^FH\^FDRajasulochana Nagasubramaniam^FS" );
"^FT63,592^A0B,45,45^FH\^FD062345^FS" );
"^FT163,595^A0B,31,31^FH\^FDThiruvenkataswamy Road West^FS" );
"^FT206,595^A0B,31,31^FH\^FDNarasimhanickanpalayam^FS" );
"^FT249,595^A0B,31,31^FH\^FDAddress Field Number 3^FS" );
"^FT292,595^A0B,31,31^FH\^FDAddress Field Number 4^FS" );
"^FT24,440^AAB,18,10^FH\^FDAllergies:^FS" );
"^FO31,29^GB34,411,34^FS" );
"^FT58,440^A0B,28,28^FR^FH\^FDAllergies go here, otherwise blank^FS");
"^FO335,51^GB48,42,48^FS");
"^FT373,93^A0B,39,38^FR^FH\^FDAB^FS");
"^FO335,14^GB48,35,48^FS");
"^FT373,49^A0B,39,38^FR^FH\^FD+^FS");
"^FT371,593^A0B,28,28^FH\^FDDOB:^FS");
"^FT371,522^AAB,27,15^FH\^FD09/09/2006^FS"
"^PQ1,0,1,Y"
"^XZ"
Tell me the solutions as soon as possible.
Regards,
rubanSorry bare with me I'm still confused. Are you saying that you are using a LabVIEW application that outputs ZPL data to a Zebra Printer (TLP 3844-Z). And you want the commands to write out a smaller font than what you are currently getting? As a quick recommendation I would call back and reword your problem to Zebra Tech support. It never hurts to ask twice.
Can you please post your code?
-SS
Message Edited by ShotSimon on 08-12-2008 04:24 PM -
Can't load print driver client forbidden error signed in as admin, mfp kyocera taskalfa 300ci
can't load print driver client forbidden error signed in as admin, mfp kyocera taskalfa 300ci only mac on network,
can't load print driver client forbidden error signed in as admin, mfp kyocera taskalfa 300ci only mac on network,
-
Calling EJB from from a client app
Hi all,
I am trying to call an EJB component from portal. The example EJB I have taken is from SDN Bonus Calculator example - Application Server/Web Dynpro/Samples and Tutorials/Using EJBs (20)
I deployed the EAR file - no issue
I wrote the following code in a client app and trying to connect to the EJB remotely.
try {
java.util.Properties properties = new Properties();
properties.put(Context.INITIAL_CONTEXT_FACTORY, "com.sap.engine.services.jndi.InitialContextFactoryImpl");
properties.put(Context.PROVIDER_URL, "ux0800:55304");
InitialContext ctx = new InitialContext(properties);
//InitialContext ctx = new InitialContext();
// get ejb home
home =
(BonusCalculatorLocalHome) ctx.lookup(
"localejbs/MySessionBean");
theCalculator = home.create();
} catch (Exception namingException) {
namingException.printStackTrace();
I get the following error
javax.naming.NoInitialContextException: Cannot instantiate class: com.sap.engine.services.jndi.InitialContextFactoryImpl [Root exception is java.lang.ClassNotFoundException: com.sap.engine.services.jndi.InitialContextFactoryImpl]
at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
at javax.naming.InitialContext.init(Unknown Source)
at javax.naming.InitialContext.<init>(Unknown Source)
at com.sap.bonus.calculation.sessionBean.MyCommandBean.<init>(MyCommandBean.java:27)
at com.sap.bonus.calculation.sessionBean.MyCommandBean.main(MyCommandBean.java:68)
Caused by: java.lang.ClassNotFoundException: com.sap.engine.services.jndi.InitialContextFactoryImpl
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.sun.naming.internal.VersionHelper12.loadClass(Unknown Source)
Any clue will be appreciated.
thnxHi Sabbir,
Following code works for me in calling EJB from normal java application. Did you added the jar files to your application?. see the required jar files in end of code.
Create simple java applcation do the following steps:
Give JNDI name to the EJB(HelloJNDI)->Add the HelloEJB to HelloEAR ->deploy
Proxy Program to call ejb:
import javax.naming.Context;
import javax.naming.InitialContext;
import com.sample.Hello;
import com.sample.HelloHome;
public class HelloTest {
public static void main(String[] args) {
Hello remote = null;
try {
Context ctx = new InitialContext();
HelloHome home = (HelloHome) ctx.lookup("HelloJNDI");
remote = home.create();
String result = remote.hello();
System.out.print("Result:" + result);
} catch (Exception e) {
System.out.println("Exception:" + e.getLocalizedMessage());
1. Go To Run > Java Application ->New->select your project and select your main class(java program from which your going to call EJB)
2. Click next tab ->(x)=Arguments
paste the following code in VM Arguments
-Djava.naming.factory.initial=com.sap.engine.services.jndi.InitialContextFactoryImpl -Djava.naming.provider.url=localhost:50104
replace the server IP address with your server IP address where your ejbs are running.
Under Class path settings for the program put the following jar files.
You can search for them from net weaver soruce folders
or copy from D:\usr\sap\J2E\JC01\j2ee\j2eeclient
ejb20.jar
logging.jar
exception.jar
sapj2eeclient.jar
Add Corresponding ejb.jar
and RUN >>>
this makes testing of your client programs easier, you can find the error trace on which line and saves lot of time.
Regards, Suresh -
Can't Print ( No Client Printer available ) on SGD 4.3.915 Webtop
Using SGD 4.3.915 with Java JRE 6.0 Update1 (or any Java Version), connecting via Webtop (ie 7 and firefox 1.5.0.12) returns you a "no client printer" error. Using classic webtop is just fine, pdf printing is available there.
Default printer on client (win xp sp2) is a network printer connected via unc share.
any checklists available? Maybe some fiile system permissions, can s/o post me the correct permissions and ownerships for the /opt/tarantella/webserver directory pls?
regards
joergthe sgd is running on a sles 10.
the initial installation was fine, but we had some printing issues and java permisions, so we "opened" the fs permissions to get it working.
now i needed a template to change it back to the original fs permissions, therefore i extracted the rpm file. -
Tips on localizing rich client apps
We are currently using a properties resource file with around 1200 lines of localized
messages/text. There is also an ApplicationResource class which contains string constants corresponding to the keys in the language file.
-- client_en_US.properties --
table.column.name=Name
table.column.address=Address
ApplicationResources.class
public static final String TABLE_COLUMN_NAME="table.column.name";
public static final String TABLE_COLUMN_ADDRESS="table.column.address";
-- client app --
ApplicationResources.getResources().getText(ApplicationResources.TABLE_COLUMN_NAME);
The biggest disadvantage with this solution is that the ApplicationResources class gets very big and consumes quite a lot of memory, you'll end up with a string instance for each text that you want to localize. The advantage is that client devs don't have to look into the properties file for the proper key name instead they can use code completion(eclipse etc) and use the constant defined to get localized text. We also minimize runtime errors when property names are not found.
We don't have any restrictions on the memory on the client side but I feel that this solution is definetly not very optimal and quite "ugly".
Any suggestions on how to do this "properly"?The biggest disadvantage with this solution is that the ApplicationResources class gets very big
and consumes quite a lot of memory, you'll end up with a string instance for each text that you
want to localize.Actually, you don't create any string instances that you wouldn't otherwise create. Further, the class consumes disk space but not necessarily memory, because the static final fields are inlined into the classes which use them, so if they're the only members of the class there's no reason for it to be loaded.
I feel that this solution is definetly not very optimal and quite "ugly".There aren't any nice ways of doing this, because you have to have some duplication. Your way of doing it is no worse than any other I've seen.
If you really want to be sure that you don't hit runtime issues, my advice would be to write a model checker to put into your build process which scans the bytecode for calls to getText, asserts that the parameter is a constant string, and scans the properties files to ensure each has an entry with that string as its key. -
Printing sapscript label using zebra printer
Hi,
Can anybody please help me regarding "printing sapscript label using zebra printer"?
i hav set the following print default settings in the transaction mb90:
output device :
NO01
device type: YZZX_ZEB
but when i try to print ,i am getting error message stating that "the respective sapscript form is not active ".
i hav also attached my print program for ur easy reference.
====================================================================*
FORM open_form_slv.
*' Description:
*' Add information for the SAP spooler
*' Change the name of the standard customized form for Zebra print
*' Last Change Vers Programmer Reason
*1
DATA: BEGIN OF print_infos.
INCLUDE STRUCTURE itcpo.
DATA: END OF print_infos.
DATA: form_name(16) TYPE c, char1(1) TYPE c, ind_beg TYPE i.
PERFORM itcpo_fuellen.
MOVE-CORRESPONDING itcpo TO print_infos.
WRITE sy-datum USING EDIT MASK '__.__.____'
TO print_infos-tdcovtitle+1.
WRITE sy-uzeit USING EDIT MASK '__:__:__'
TO print_infos-tdcovtitle+12.
CONCATENATE itcpo-tddest sy-uname ' PO'(001) ekpo-ebeln ' Doc.No'(002)
mseg-mblnr print_infos-tdcovtitle
INTO print_infos-tdcovtitle SEPARATED BY space.
form name from the table YZZM_GR_LABEL
IF NOT g_fonam IS INITIAL.
tnapr-fonam = g_fonam.
ENDIF.
if the used printer is a Zebra label printer, then the customized
layout set name ???_???_XXX will be changed to ???_???_ZP
SELECT SINGLE * FROM tsp03d WHERE padest = nast-ldest.
IF tsp03d-patype = 'YZZX_ZEB'.
ind_beg := 15.
WHILE ind_beg > -1.
char1 := tnapr-fonam+ind_beg. " substr(tnapr-fonam,ind_beg,1)
IF char1 = '_'.
form_name := tnapr-fonam(ind_beg).
CONCATENATE form_name '_ZP' INTO tnapr-fonam.
EXIT.
ENDIF.
ind_beg := ind_beg - 1.
ENDWHILE.
ENDIF.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
device = 'PRINTER'
language = language
OPTIONS = print_infos
form = tnapr-fonam
dialog = ' '.
x_open := x.
IF mseg-weanz = 0. mseg-weanz = 1. ENDIF.
IF syst-tcode <> 'MB90' AND NOT g_flag_popup IS INITIAL.
check for requirement of printing label and ask for gr-quantities (popup)
SELECT SINGLE * FROM yzzm_gr_quantity WHERE ebeln = mseg-ebeln.
CLEAR yzzm_gr_quantity-no_popup.
ELSE.
and ask not for gr-quantities
IF syst-tcode = 'MB90'.
yzzm_gr_quantity-erfmg := mseg-menge.
ELSE.
yzzm_gr_quantity-erfmg := mseg-menge / mseg-weanz.
ENDIF.
yzzm_gr_quantity-no_popup := x.
ENDIF.
determination inspection lot number
CLEAR qals-prueflos.
SELECT SINGLE * FROM qals WHERE mblnr = mseg-mblnr
AND zeile = mseg-zeile
AND mjahr = mseg-mjahr.
determination vendor batch
CLEAR mch1-licha.
SELECT SINGLE * FROM mch1 INTO mch1 WHERE matnr = mseg-matnr
AND charg = mseg-charg.
ENDFORM. "open_form_label
=================================================================== *
FORM we01_print_slv.
*' Description:
*' print out of hazardous symbol
*' controls the Zebra printer
*' Last Change Vers Programmer Reason
*****26.09.2007 Starts
DATA: l_objky TYPE nast-objky,"Object key
l_vstat TYPE nast-vstat. "Processing status of message
*****26.09.2007 Starts
TABLES: mgef, t300.
FIELD-SYMBOLS: .
DATA: aux_index LIKE sy-index.
DATA: count_haz_sym, position TYPE n, zw TYPE p DECIMALS 1.
DATA: aux_value(5) TYPE c.
DATA: txt(10) TYPE c, pos(5) TYPE c.
t001w-werks = r_werks.
t001w-name1 = r_name1.
PERFORM read_address.
*2
SELECT SINGLE * FROM ekpo WHERE ebeln = mseg-ebeln
AND ebelp = mseg-ebelp.
CLEAR mara-stoff.
SELECT SINGLE stoff INTO mara-stoff FROM mara WHERE matnr = mseg-matnr.
IF NOT mara-stoff IS INITIAL.
CLEAR t300.
SELECT SINGLE * FROM t300 WHERE lgnum = mseg-lgnum.
IF NOT sy-subrc IS INITIAL.
for plants without warehouses try to use the country code
CASE mseg-werks.
WHEN 'BUP'.
t300-regkz := 'US '.
ENDCASE.
ENDIF.
CLEAR mgef.
SELECT SINGLE * FROM mgef WHERE stoff = mara-stoff
AND regkz = t300-regkz.
ENDIF.
in case of more then one label, use for each a new output window
(not only for the first)
IF g_count > 1.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'NEW-WINDOW'.
ENDIF.
Ausgabe Gefahrstoffsysmbole Neustadt, V.Hilgert 14.07.98
*For output type YNL7, the hazardous warning symbol has to be printed at the bottom of the label.So label is called before that.
IF tnapr-kschl = 'YNL7'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'LABEL'.
ENDIF.
count_haz_sym = 0. position = 0.
WHILE count_haz_sym = 'XN'.
For output type YNL7, the width of the standard text is small.
IF tnapr-kschl = 'YNL7'.
zw = position * '0.2' + '0.1'. pos = zw.
ELSE.
zw = position * '1.3' + '0.1'. pos = zw.
ENDIF.
IF tsp03d-patype = 'YZZX_ZEB'. " device type for ZEBRA label priter
aux_value := count_haz_sym.
ELSE.
aux_value := pos. " HP/Kyocera or other laser printer
ENDIF.
CALL FUNCTION 'TEXT_SYMBOL_SETVALUE'
EXPORTING
name = '&XPOS&'
value = aux_value
EXCEPTIONS
OTHERS = 1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element =
window = 'MAIN'
EXCEPTIONS
element = 1
function = 2
type = 3
unopened = 4
unstarted = 5
window = 6
OTHERS = 7.
IF sy-subrc = 0.
*Varying the position for YNL7
IF tnapr-kschl = 'YNL7'.
position = position + 2.
ELSE.
position = position + 1.
ENDIF.
ENDIF.
ENDIF.
ENDWHILE.
IF NOT mseg-vfdat IS INITIAL.
am07m-mhtxt = text-105.
ENDIF.
IF NOT am07m-mhdat IS INITIAL.
am07m-mhztx = text-106.
ENDIF.
IF ekko-bsart = 'UB'.
am07m-litxt = text-101.
am07m-libzg = ekko-reswk.
ELSE.
am07m-litxt = text-100.
am07m-libzg = ekko-lifnr.
ENDIF.
belpos-mblnr = mkpf-mblnr.
belpos-zeile = mseg-zeile.
CONDENSE belpos NO-GAPS.
am07m-belpos = belpos.
IF t156-shkzg = h.
am07m-hdlne = text-020.
ELSE.
am07m-hdlne = text-010.
ENDIF.
Ausgabe der Etiketten mit den ind. Mengen
IF NOT g_flag_popup IS INITIAL.
SELECT SINGLE * FROM yzzm_gr_quantity WHERE ebeln = mseg-ebeln
AND weanz = g_count.
ELSE.
* print the number of labels is handeled by the Zebra printer
IF tsp03d-patype = 'YZZX_ZEB'. " device type for Zebra label prts
g_lbls_tot := mseg-weanz - g_count + 1.
g_break_print := x.
ENDIF.
ENDIF.
mseg-erfmg := yzzm_gr_quantity-erfmg.*
********26.09.2007 Starts
CONCATENATE mseg-mblnr mseg-mjahr mseg-zeile INTO l_objky.
SELECT SINGLE vstat INTO l_vstat FROM nast WHERE kappl = 'ME' AND
objky = l_objky AND
kschl = 'YNL7'.
********26.09.2007 Ends
CALL FUNCTION 'TEXT_SYMBOL_SETVALUE'
EXPORTING
name = '&nummer&'
value = g_count.
IF tnapr-kschl <> 'YNL7'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'LABEL'.
else.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'BAR_CODE'
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10.
IF sy-subrc <> 0. MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. "GR_label_print
*& Form lesen
text
-->OBJKY text
FORM lesen USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
AND mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
AND zeile = nast_key-zeile
AND mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
retco = sy-subrc.
EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
IF NOT mseg-evers IS INITIAL. "Versandvorschriften lesen.
PERFORM t027_lesen.
ENDIF.
PERFORM bestellung_lesen.
IF NOT ekpo-knttp IS INITIAL AND NOT
ekpo-weunb IS INITIAL.
PERFORM kontierung_lesen. "für multikontierte Bestellungen
ENDIF.
IF NOT mseg-ematn IS INITIAL.
PERFORM lesen_htn.
ELSE. "111277/PH
CLEAR am07m-mfrpn. "111277/PH
ENDIF.
IF mseg-matnr IS INITIAL.
mseg-menge = mseg-bpmng.
mseg-meins = mseg-bprme.
PERFORM bestelltext_lesen.
CLEAR mabdr.
ELSE.
PERFORM material_lesen.
ENDIF.
PERFORM tab024_lesen.
PERFORM t064b_lesen.
PERFORM ladr_lesen.
ENDFORM. "lesen
Lesen für WE-Schein Fert.Auftrag -
FORM lesen_wf USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
AND mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
AND zeile = nast_key-zeile
AND mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
retco = sy-subrc.
EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
PERFORM auftrag_lesen.
IF NOT mseg-matnr IS INITIAL.
PERFORM material_lesen.
ELSE.
mseg-menge = mseg-erfmg.
mseg-meins = mseg-erfme.
ENDIF.
PERFORM tab024d_lesen.
PERFORM t064b_lesen.
PERFORM ladr_lesen.
ENDFORM. "lesen_wf
Lesen für Warenausgang -
FORM lesen_wa USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
AND mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
AND zeile = nast_key-zeile
AND mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
retco = sy-subrc.
EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
IF NOT mseg-matnr IS INITIAL.
PERFORM material_lesen.
ENDIF.
PERFORM ladr_lesen.
ENDFORM. "lesen_wa
Druck Vorbereiten -
FORM open_form.
PERFORM itcpo_fuellen.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
device = 'PRINTER'
language = language
OPTIONS = itcpo
dialog = ' '.
PERFORM lesen_t159p.
x_open = x.
ENDFORM. "open_form
Druck Vorbereiten Sammelscheine -
FORM open_form_sammel.
PERFORM lesen_t159p.
PERFORM itcpo_fuellen.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
device = 'PRINTER'
language = language
OPTIONS = itcpo
form = tnapr-fonam
dialog = ' '.
x_open = x.
ENDFORM. "open_form_sammel
Druck schließen -
FORM close_form.
CHECK NOT x_open IS INITIAL.
CALL FUNCTION 'CLOSE_FORM'.
CLEAR x_open.
ENDFORM. "close_form
Hilfsfelder versorgen für Sammelscheindruck -
FORM helpdata1.
*mkpf = mkpf.
*mseg-lgort = mseg-lgort.
*ladr = ladr.
save_mkpf = *mkpf-usnam.
save_mblnr = *mkpf-mblnr.
save_budat = *mkpf-budat.
save_cpudt = *mkpf-cpudt.
save_ematn = *mseg-ematn.
save_lgort = *mseg-lgort.
save_ladr = *ladr.
*t001w = t001w.
save_werks = *t001w-werks.
save_name1 = *t001w-name1.
*ekko = ekko.
*am07m = am07m.
save_lifnr = *ekko-lifnr.
save_ebeln = *ekko-ebeln.
save_ekgrp = *ekko-ekgrp.
save_linam = *am07m-name1.
save_lina2 = *am07m-name2.
*t024 = t024.
save_eknam = *t024-eknam.
save_ektel = *t024-ektel.
*mkpf-usnam = old_mkpf.
*mkpf-mblnr = old_mblnr.
*mkpf-cpudt = old_cpudt.
*mkpf-budat = old_budat.
*mseg-ematn = old_ematn.
*mseg-lgort = old_lgort.
*ladr = old_ladr.
*t001w-werks = old_werks.
*t001w-name1 = old_name1.
*t024-eknam = old_eknam.
*t024-ektel = old_ektel.
*ekko-lifnr = old_lifnr.
*ekko-ebeln = old_ebeln.
*ekko-ekgrp = old_ekgrp.
*am07m-name1 = old_linam.
*am07m-name2 = old_lina2.
save_lfa1 = lfa1.
IF NOT old_lfa1 IS INITIAL.
lfa1 = old_lfa1.
ENDIF.
ENDFORM. "helpdata1
--- Versorgung der Hilfsfelder vor CLOSE_FORM bei Sammelscheindruck --
FORM helpdata2.
old_lfa1 = save_lfa1.
lfa1 = save_lfa1.
old_mkpf = save_mkpf.
old_lgort = save_lgort.
old_ladr = save_ladr.
old_budat = save_budat.
old_cpudt = save_cpudt.
old_werks = save_werks.
old_name1 = save_name1.
old_mblnr = save_mblnr.
old_lifnr = save_lifnr.
old_linam = save_linam.
old_lina2 = save_lina2.
old_ebeln = save_ebeln.
old_ekgrp = save_ekgrp.
old_eknam = save_eknam.
old_ektel = save_ektel.
old_ematn = save_ematn.
*mkpf-usnam = save_mkpf.
*mkpf-mblnr = save_mblnr.
*mkpf-budat = save_budat.
*mkpf-cpudt = save_cpudt.
*mseg-ematn = save_ematn.
*mseg-lgort = save_lgort.
*ladr = save_ladr.
*t001w-werks = save_werks.
*t001w-name1 = save_name1.
*t024-eknam = save_eknam.
*t024-ektel = save_ektel.
*ekko-lifnr = save_lifnr.
*ekko-ebeln = save_ebeln.
*ekko-ekgrp = save_ekgrp.
*am07m-name1 = save_linam.
*am07m-name2 = save_lina2.
ENDFORM. "helpdata2
Form Lesen Warenausgang Lohnbearbeiter -
FORM lesen_wlb USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
AND mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
AND zeile = nast_key-zeile
AND mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
retco = sy-subrc.
EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
IF NOT mseg-matnr IS INITIAL.
PERFORM material_lesen.
ENDIF.
ON CHANGE OF mseg-lifnr.
PERFORM read_address.
ENDON.
ENDFORM. "lesen_wlb
*eject
Fuellen der ITCPO -
FORM itcpo_fuellen.
IF xscreen NE space.
*- Testausgabe auf Bildschirm -
itcpo-tdpreview = 'X'.
itcpo-tdnoprint = 'X'.
ELSE.
CLEAR: itcpo-tdpreview,
itcpo-tdnoprint.
ENDIF.
MOVE-CORRESPONDING nast TO itcpo.
itcpo-tdcover = nast-tdocover.
itcpo-tddest = nast-ldest.
itcpo-tddataset = nast-dsnam.
itcpo-tdsuffix1 = nast-dsuf1.
itcpo-tdsuffix2 = nast-dsuf2.
itcpo-tdimmed = nast-dimme.
itcpo-tddelete = nast-delet.
itcpo-tdcopies = nast-anzal.
itcpo-tdprogram = sy-repid.
ITCPO-TDTELELAND = US_COUNTRY.
itcpo-tdsenddate = nast-vsdat.
itcpo-tdsendtime = nast-vsura.
itcpo-tdnewid = x.
ENDFORM. "itcpo_fuellen
*eject.
------------ FORM lesen der Lagerortadr. ---------------------------*
FORM ladr_lesen.
DATA: BEGIN OF addr_sel.
INCLUDE STRUCTURE addr1_sel.
DATA: END OF addr_sel.
CLEAR ladr.
SELECT SINGLE * FROM twlad WHERE werks = mseg-werks
AND lgort = mseg-lgort
AND lfdnr = '001'.
IF NOT twlad-adrnr IS INITIAL AND sy-subrc IS INITIAL.
MOVE twlad-adrnr TO addr_sel-addrnumber.
ENDIF.
CALL FUNCTION 'ADDR_GET'
EXPORTING
address_selection = addr_sel
IMPORTING
sadr = ladr
EXCEPTIONS
OTHERS = 1.
ENDFORM. "ladr_lesen
**& Form REPRINT
text
*FORM reprint.
TABLES : nase.
DATA : x TYPE string.
IF nase-vermo = 2.
x = 'REPRINT'.
ENDIF.
*ENDFORM. "REPRINT
Kindly do the needful.
Thanks in advance
Regards
SwarnaHi Swarna,
CALL FUNCTION 'OPEN_FORM'
EXPORTING
device = 'PRINTER'
language = language
OPTIONS = print_infos
<b>form = tnapr-fonam</b>
dialog = ' '.
x_open := x.
I thing its not a good way to pass the Form name to the Parameter.
Try like,
data : temp_form like tnapr-fonam.
<b>form = temp_form</b>
Thanks. -
Client apps accessing WL 6 services
Hi All
This is an addendum to the question I posted :
Subject: External clients accessing WL(4.5.1 SP13) JNDI
Date: Thu, 15 Feb 2001 14:07:38 -0500
(BTW, I heard from only one person till now).
I would repeat the question. We all have clients (applications) which
would want to make use of our services (beans, etc). How are they able
to access the Weblogic server's JNDI space?
Only by having WLInitialCtxFactory and other related classes in their
classpath??
If that IS the case, isnt it defeating the purpose of using JNDI. Where
is the transparency of location here. Looks like I still need to bundle
Weblogic server classes to my clients (how many ever they may be).
Support says there was no other way in WL 4.5.1. Is it any different in
WL 6?
If there is another way people are dealing with this situation, I would
be grateful if you can reply to this post.
Thanks
Madhu
(PS Weblogic engineers, please respond to this)Hi
I wish there was a way that one could access using ANY JNDI implementation
PROVIDED the credentials could be verified within the Weblogic security
realm.
Then I could ask the client to use SUN/Netscape or any other vendor's
implementation and give the client a generic guest kind of credentials.
What would be the issues involved if this were to happen?
In our situation, the client might be another team hosting their own
applications on Websphere or SilverStream and I cannot ask them to load up
WL classes too. You know how it works.
Thanks
Madhu
Daniel Hoppe wrote:
Hi,
for WL5.1 there is a fourth approach which needs careful investigation
to work properly but which is successfully used with Java Webstart
within our development team. I guess this will work for WL6.0 in a
similar manner. We use java -verbose and utils.verboseToZip to extract
only the classes needed into one wl specific jar. The advantage is that
there is an overal jar of about 2MB, so it's realistic to distribute
from ISDN connections onwards. The disadvantage is that you need to
follow every code line of your application very carefully - especially
error situations - to get all the necessary classes.
Daniel
-----Original Message-----
From: K.J. van der Bent [mailto:[email protected]]
Posted At: Tuesday, February 27, 2001 11:29 PM
Posted To: jndi
Conversation: Client apps accessing WL 6 services
Subject: Re: Client apps accessing WL 6 services
Yes, dealing with the same problem.
At the moment we think that there are three strategies:
1. Deploy all WL classes on the client (weblogicaux, current
servicepack-jar
and a jar containing the complete classes directory). This takes about
20
MB. Since we will use Java Web Start for deploying our applications we
install this 'weblogic bundle' along with the installation of JWS. From
then
on, only the servicepack jar (~2 MB) will be updated on the server and
therefore downloaded by JWS to the client. It's not an ideal situation
but
it allows 'quick and easy' developing
2. A second approach is to develop applets and use the plugin to execute
them on the client. The plugin allows single class loading (JWS only
loads
jars!) and requests for a class only when it is needed. This way you
don't
need 20 MB of jars on the client but still many weblogic classes are
loaded.
(And aren't we tempted to use Java Web Start instead of applets embedded
in
a browser!)
3. The third approach we are currently looking into is develop an
application totally independent of Weblogic (Thus, no
WLInitialCtxFactory).
Disadvantages are that you can't use some of the benefits of WL (like
optimized t3 connections and maybe easier developing). Advantage however
is
that our applications are independent of the type of application server.
Briefly this is where we are now. We were also a little discouraged
while
browsing the newsgroups and noticing that this seems to be an issue for
many
developers.
Maybe someday...
K.J. van der Bent -
HP C5180 printer scanner scan.app won't launch missing HPWorkflowsManager
I have just bought a new 27" due core IMAC and it successfully transferred all my files and apps from my Macbook Pro. Except now the HP c5180 printer scanner scan.app wont launch. I have deleted all apps etc from the app and library folders and used apple update to recreate but I still have the same problem. Heres the details in the error report;
Process: HP Scan [538]
Path: /Applications/Hewlett-Packard/HP Scan.app/Contents/MacOS/HP Scan
Identifier: com.hp.scan.app
Version: ??? (???)
Code Type: X86 (Native)
Parent Process: launchd [193]
Date/Time: 2010-07-26 18:30:29.316 +1000
OS Version: Mac OS X 10.6.4 (10F569)
Report Version: 6
Interval Since Last Report: 72096 sec
Crashes Since Last Report: 6
Per-App Crashes Since Last Report: 6
Anonymous UUID: A49AE16B-A291-49B5-9E57-40E28A64DAC4
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Printers/hp/Frameworks/HPWorkflowsManager.framework/Versions/A/HPWorkf lowsManager
Referenced from: /Applications/Hewlett-Packard/HP Scan.app/Contents/MacOS/HP Scan
Reason: image not found
Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.53f13
Graphics: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x8F), Atheros 9280: 2.1.9.8.1
Bluetooth: Version 2.3.3f8, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: WDC WD1001FALS-40U9B0, 931.51 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: OneTouch, 0x0d49, 0x7310, 0x24100000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0x24400000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000
USB Device: Photosmart C5100 series, 0x03f0 (Hewlett Packard), 0x5811, 0x26200000
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26500000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x06110000
Any ideas what to do next? -
ADF mobile Client App: Issue about using db sequence for populating row_id
Hi,
I'm working on an ADF mobile client app POC project. In the mobile app, new record can be created, the column type for row_id is VARCHAR2(15), I used the db sequence created in MC db, converted the seq number to a string, then set row_id via initDefaults method.
The new records are created and row_ids are set with the proper sequence numbers when first time launching the client app in blackberry simulator. But if I exit the app and re-launch the app again, I got net.rim.device.api.database.DataTypeExpection when trying to create a new record.
Could anyone please help me and let me know what could cause this issue? What should be the proper way to populate the row_id? Appreciate your response in advance!
Jdev/ADFMobile extension version:
11.1.1.4.0 build 5860
mobile server version:
10.3.0.3
blackberry version:
BlackBerry JDE 5.0.0
BlackBerry Smartphone Simulators 6.0.0.141 (9800)
Code:
public class SOrgExtEOImpl extends EntityImpl {
protected void initDefaults() {
super.initDefaults();
SequenceImpl seq = new SequenceImpl("S_SIEBELMOBILE_S_ORG_EXT", getDBTransaction());
populateAttributeAsChanged(ROWID1, seq.getSequenceNumber().toString());
Log:
First time launching the MC app:
[FINE - adfnmc.bindings - BC4JIteratorBinding - createRow]
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 0 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 1 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 2 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 3 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 4 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 5 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 6 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 7 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 8 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 9 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 10 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 11 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 12 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 1 to 2010-12-20 14:58:13.0
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 3 to 2010-12-20 14:58:13.0
[FINE - adfnmc.model - SequenceImpl - create] Database SQLite doesn't support sequences natively; creating TableSequenceImpl for
S_SIEBELMOBILE_S_ORG_EXT
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 0 to 73501
[FINE - adfnmc.model - EntityImpl - getAttribute] Retrieved from siebel.mobile.SOrgExtEO.CreatedBy at index 2
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 2 to 1-11ZQ
[FINE - adfnmc.model - EntityImpl - getAttribute] Retrieved from siebel.mobile.SOrgExtEO.LastUpdBy at index 4
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 4 to 1-53Y
[FINE - adfnmc.model - EntityImpl - getAttribute] Retrieved from siebel.mobile.SOrgExtEO.BuId at index 5
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 5 to 1-1DG
[INFO - adfnmc.model - MetaObjectManager - findOrLoadMetaObject] MetaObject siebel.mobile.AccountAddressFKAssoc not found in cache, so
loading it from XML
[INFO - adfnmc.model - MetaObjectManager - findOrLoadMetaObject] MetaObject siebel.mobile.ActivityAccountFKAssoc not found in cache, so
loading it from XML
[FINE - adfnmc.bindings - BC4JIteratorBinding - notifyRowInserted]
[FINE - adfnmc.bindings - IteratorExecutableBindingImpl - rowInserted] IterBinding - AccountPageDef:AccountAddressView1Iterator
[FINE - adfnmc.bindings - IteratorExecutableBindingImpl - notifyRowInserted] IterBinding - AccountPageDef:AccountAddressView1Iterator
[FINE - adfnmc.bindings - RangeBindingImpl - rowInserted] AccountAddressView1
[FINE - adfnmc.bindings - RangeBindingImpl - notifyNewElement] AccountAddressView1, index:0
[FINE - adfnmc.ui - BBTable - newElement] relativeIndex = 0
[FINE - adfnmc.bindings - RangeBindingImpl - setVariableIndex] Begin, AccountAddressView1, listener: oracle.adfnmc.component.ui.BBTable$1
[FINE - adfnmc.bindings - SimpleContext$Variables - setVariable] Setting variable "row" to expression #
{AccountPageDef_AccountAddressView1_rowAlias}
[FINE - adfnmc.ui - BBOutputText - endInit]
Re-launching the MC app:
INFO - adfnmc.bindings - BC4JOperationBinding - execute] Preparing to execute OperationBinding id:'CreateInsert'
[FINE - adfnmc.bindings - BC4JIteratorBinding - createRow]
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 0 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 1 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 2 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 3 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 4 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 5 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 6 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 7 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 8 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 9 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 10 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 11 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 12 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 1 to 2010-12-20 15:08:35.0
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 3 to 2010-12-20 15:08:35.0
[FINE - adfnmc.model - SequenceImpl - create] Database SQLite doesn't support sequences natively; creating TableSequenceImpl for
S_SIEBELMOBILE_S_ORG_EXT
[INFO - adfnmc.ui - ErrorHandlerImpl - reportException] BindingContainer: AccountPageDef, exception: oracle.adfnmc.AMCJboException
[WARNING - adfnmc.ui - ErrorHandlerImpl - reportException] [oracle.jbo.server.SequenceImpl$TableSequenceImpl.retrieveSequenceParamsFromDB]
oracle.adfnmc.AMCJboException: ADF-MNC-60109: Error retrieving sequence parameters for sequence S_SIEBELMOBILE_S_ORG_EXT
[WARNING - adfnmc.ui - ErrorHandlerImpl - reportException] oracle.adfnmc.java.sql.SQLException:
net.rim.device.api.database.DataTypeException:Datatype mismatch
[WARNING - adfnmc.ui - ErrorHandlerImpl - reportException] Unable to retrieve String at index 2
[WARNING - adfnmc.ui - ErrorHandlerImpl - reportException]
[FINE - adfnmc.ui - MessageBox - show] message=oracle.adfnmc.AMCJboException: ADF-MNC-60109: Error retrieving sequence parameters for
sequence S_SIEBELMOBILE_S_ORG_EXT
[FINE - adfnmc.ui - MessageBox - show] oracle.adfnmc.java.sql.SQLException: net.rim.device.api.database.DataTypeException:Datatype mismatch
[FINE - adfnmc.ui - MessageBox - show] Unable to retrieve String at index 2>
>
using 10gR2 on Sun-Solaris. Getting consistently "db file parallel read" over 35 ms as an average wait for the past few months. No performance issues as such.
Using RAID 1+0. DB Size is 2 TB. Transactions are OLTP/Batch
Is this metric high or normal. How to justify that..
Looking at your results it's not really possible to say.
db file parallel read is a request for a number of randomly distirbuted blocks, and the time for a read is the time for the last block of the set to be returned.
Without knowing how many blocks are being requested at a time you can't really determine what constitutes a reasonable time. Given that you say OLTP + Batch, and have a large volume of scattered reads, it's quite possible that you have some queries on the Batch side doing very large index range scans - which would allow for some very large db file parallel reads.
I take it from the use of statspack that you're not licensed for the diagnostic and performance packs; it would be easy to query v$active_session_history to get some idea of the number of blocks per request as this is given by the P2 parameter. As it is. you may be able to get a rough idea by messing about with the various "physical read" numbers in the Instance Activity section of statspack.
Regards
Jonathan Lewis -
Error #1096 fault(Client.CouldNotDecode)
Ever since i updated my Flash Player plugin for Firefox 3 my
application keeps reports the following mx:HTTPService error #1096
fault(Client.CouldNotDecode) This issue is only in FireFox but in
Internet Explorer I have no problems bringing up the data. Both
browsers
have the latest version of Flash. When i test my code on a
older version of the flash plugin for FireFox it works. Any ideas
as to why. The XML is properly formatted with no errors.
The funny thing is it all works perfectly in Internet
Explorer Why is this. Is this a bug in the FlashPlayer?
Also my XML is properly formatted.What do you get when you print $ymessage to file in PHP, to see what it is?
What do you get when you trace userRequest.lastResult.games.game?
What does the PHP return outside of Flex?
If this post answered your question or helped, please mark it as such. -
Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2 residing in the same server and being used by Apps server as it's metadata.
bash-3.00$ export ORACLE_HOME=/data/ora11g/app/ora11g/product/11.2.0
bash-3.00$ cd /data/OAS/install/soa_schemas/irca/
bash-3.00$ ./irca.sh
Integration Repository Creation Assistant (IRCA) 10.1.3.1.0
(c) Copyright 2006 Oracle Corporation. All rights reserved.
ERROR: Cannot find library - /data/ora11g/app/ora11g/product/11.2.0/jdbc/lib/ojdbc14.jar
Please verify that the ORACLE_HOME is set correctly.
bash-3.00$Hi Craig,
Database 11gR2 could be used for Installing Application Server 10.1.3.x but with some limitation.
So please review the note:-887365.1 Oracle Database 11g Release 2 (11.2) Certification for Oracle Application Server 10g (10.1.2, 10.1.3, 10.1.4)
Section :- Oracle Application Server 10g Release 3 (10.1.3)
Regards,
Praaksh. -
We use the RD Client app from Microsoft on all of our mobile devices. The newest version of RD Client (8.0.8) doesn't work on any iPhones and iPads. It crashes when it tries to connect to the designated remote gateway. All previous
versions seems to work, 8.05, 8.0.6, and 8.0.7. We tested it on a MAC desktop and Android devices and they seem to work fine. I tried uninstalling and the re-installing the App, but it still doesn't work on the iphone or ipad. It just crashes and close
out. We tested it on iOS 7.1.1 and 7.1.2. This is definitely an issue with the latest RD Client software. We tested on a lot of iPhones and iPads and all results been the same. Need help.Hi,
If we do not use Remote Gateway, does the issue also occur?
Meanwhile, please provide us the log for check.
Thanks.
Jeremy Wu
TechNet Community Support -
Unable to scan using HP All-in-One Printer Remote android app.
Hello,
I am using Hp All-In-One Printer Remote android app,Print function works fine but scanning doesn't work neither from my phone (4.4 KitKat) or my tablet (jelly bean 4.1).
scanning function works using my laptop (Windows 7)
plz help.
This question was solved.
View Solution.Hi @EslamHassan
Welcome to the HP Support Forums. I gather that you have a question regarding the HP All-in-One Printer Remote app.
The LaserJet M127fw printer is not a supported printer for the HP AiO app. I have included the HP Printers and Supported Mobile Printing Solutions document for reference.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP -
Please help error -9808 when downloading apps in itunes store anyone can help me out
please help error -9808 when downloading apps in itunes store anyone can help me out
Click here > iTunes: Advanced iTunes Store troubleshooting
Then "expand" Specific Conditions and Alert Messages
Then click 9808
Maybe you are looking for
-
I credited my itunes account on my pc with a £15 voucher, after a few downloads, I am left with £1.29 When I check on itunes via my touch it shows a different amount over £5 in fact, are these different accounts or is the touch just not updating my p
-
Laserjet cp1025nw takes 90 seconds plus to start printing
How do I fix this?
-
Stanging indicator change in control cycle after production order released
HI We have MM PP interface active i setup staging indicator 4 for one material via control cycle Production order is created and released now we would like to change staging indicator to 1 [pick parts] how we reread control cycles data in production
-
Hi, when I copy the standard BSP balance score card I get errors in my java scripts. Has someone already tried to copy the balance score card and solve the java script errors. I have a custome who want to use SEM in a portal, with there own portal de
-
Process: Safari [205] Path: /Applications/Safari.app/Contents/MacOS/Safari Identifier: com.apple.Safari Version: 5.1.2 (6534.52.7) Build Info: WebBrowser-75345207~2 Code Type: X86-64 (Native) Parent Process: