Error removing data from MDS using WLST

I'm new at MDS so i want to remove some data which I inserted in the wrong structure....sounds quite easy. After some looking around I should be able to do this using a deployment plan and WLST. I chose the last one as I am not realy familiar yet with deployment plans. I connect with my server and started WLST did the following:
wls:/offline> connect ('weblogic', 'mypassword' , 't3://localhost:8001')
Connecting to t3://localhost:8001 with userid weblogic ...
Successfully connected to managed Server 'soa_server1' that belongs to domain 'MY_DOMAIN'.
Warning: An insecure protocol was used to connect to the
server. To ensure on-the-wire security, the SSL port or
Admin port should be used instead.
wls:/MY_DOMAIN/serverConfig> deleteMetadata(application='soa-infra', server='soa-server1', docs='/apps/deploy/*')The outcome was:
Location changed to custom tree. This is a writable tree with No root.
For more help, use help(custom)
and after a while it closed the WLST connection. Can anyone tell me how I can remove data from my repository or what is going wrong here?
Thanks in advance

Hi,
I think you were getting this error because you had your server name incorrect : soa-server1 instead of soa_server1. Also it might be possible that soa-infra is installed on the different server.
Regards,
Neeraj Sehgal

Similar Messages

Error reading data from Infocube using shell script.

Dear all ,
I am facing a problem while reading data from an infocube using a shell script.
The details are as follows.
One of the shell script reads the data from the infocube to extract files with the values.
The tables used for extraction by the shell script are :
from   SAPR3."/BIC/F&PAR_CUBE.COPA"     FCOPA,
       SAPR3."/BIC/D&PAR_CUBE.COPAU"    COPAU,
       SAPR3."/BIC/D&PAR_CUBE.COPAP"    COPAP,
       SAPR3."/BIC/D&PAR_CUBE.COPA1"    CCPROD,
       SAPR3."/BIC/D&PAR_CUBE.COPA2"    CCCUST,
       SAPR3."/BIC/D&PAR_CUBE.COPA3"    COPA3,
       SAPR3."/BIC/D&PAR_CUBE.COPA4"    COPA4,
       SAPR3."/BIC/D&PAR_CUBE.COPA5"    COPA5,
       SAPR3."/BIC/MCCPROD"      MCCPROD,
       SAPR3."/BIC/SCCPROD"      SCCPROD,
       SAPR3."/BIC/MCCCUSTOM"    MCCCUSTOM,
       SAPR3."/BIC/SCCCUSTOM"    SCCCUSTOM,
       SAPR3."/BIC/SORGUNIT"     SORGUNIT,
       SAPR3."/BIC/SUNIMOYEAR"   SUNIMOYEAR,
/*     SAPR3."/BI0/SFISCPER"     SFISCPER, */
       SAPR3."/BI0/SREQUID"      SREQUID,
       SAPR3."/BI0/SCURRENCY"    SCURRENCY,
       SAPR3."/BIC/SSCENARIO"    SSCENARIO,
       SAPR3."/BIC/SSOURCE"      SSOURCE
The problem is that the file generation by this script (after reading the data from teh infocube) is taking an unexpected time of 2 hours which needs to be maximum 10 mins only.
I used RSRV to get the info about these tables for the infocube:
Entry '00046174', SID = 37 in SID table is missing in master data table /BIC/MCUSLEVEL2
Entry '00081450', SID = 38 in SID table is missing in master data table /BIC/MCUSLEVEL2
and so on for SID = 39 and SID = 35 .
Checking of SID table /BIC/SCUSLEVEL2 produced errors
Checking of SID table /BIC/SCUSLEVEL3 produced errors
Can you please let me know if this can be a reason of delay in file generation (or reading of data from the infocube).
Also , Please let me know how to proceed with this issue.
Kindly let me know for more information, if required.
Thanks in advance for your help.
-Shalabh

Hi ,
In continuation with searching the solution to the problem , I could manage to note a difference in the partition of the Fact table of the infocube.
Using SE14 -> Storage Parameters, I could find the partition done for the fact table as :
PARTITION BY: RANGE
COLUMN_LIST: KEY_ABACOPA
and subsequently there are partitions with data in it.
I need to understand the details of these partitions .
Do they correspond to each requests in the infocube(which may not be possible as there are 13 requests in infocube and much more partitions).
Most importantly, since this partition is observed for this onfocube only and not for other infocubes, it is possible that it can be a reason for SLOW RETRIEVAL of data from this ionfocube( not sure since the partition is used to help in fast retreival of data from the infocubes).
Kindly help.
Thanks for your co-operation in advance.
-Shalabh

Error reading data from infocube using RSDRI_INFOPROV_READ

hi,
I am trying to write a Function module to read data from an Infocube.
This is a remote enabled Function module and is working fine if I make a few minor changes and customize it to read data from a case of a DSO.
However, for cube, code is showing no syntax errors, but on execution is not returning any data also.
I have tried defining E_T_data as E/F/V tables of the cube, but still not getting any output.
Probably this is related to structure of E_T_data only. . . .
Can anyone please guide me on this.
regards
Parikshit.

Hello,
E_T_DATA needs to defined as an internal table with all the fields you need as an O/P from the infocube you are trying to fetch data from. Just make sure, you keep the name of the fields same as Name of the infoobjects in the Cube. So just define e_t_data Standard internal table with all fields you want to fetch from Infocube (name of fields same as infoobject name).
Also fill in the g_th_sfc, g_th_sfk internal tables with the list of characteristics and Keyfigues you wanna o/p with chanm/kyfnm field populated with exact name of infoobject and chaalias/kyfalias same as defined in g_t_data (good to keep both same).
Thanks
Edited by: Sandesh Shetty on Jul 29, 2008 2:26 PM

Error when reading data from XML using JAXB?

Hi all,
I get the error message when reading data from XML using JAXB.
[org.xml.sax.SAXParseException: The entity name must immediately follow the '&' in the entity reference.]
     at javax.xml.bind.helpers.AbstractUnmarshallerImpl.createUnmarshalException
(AbstractUnmarshallerImpl.java:315)
     at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.createUnmarshalException(UnmarshallerImpl.java:481)
     at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal0(UnmarshallerImpl.java:199)
     at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:168)
     at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:137)
     at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:142)
I don't find the reason, please help!
Thanks in advance!

The problem is sovled.

Error Message: Data from Business Add-In ME_PROCESS_PO_CUST not transferred

Hi All,
I have done a BADI implementation for ME_PROCESS_PO_CUST and when I try to convert a PR to PO using ME59N in ECC u2013 AFS System I am getting below error message.
Data from Business Add-In ME_PROCESS_PO_CUST not transferred.
I am trying to populate certain PO fields ( ekko and ekpo ) from PR fields. But the above error occurs when I update the Ex Factory Date manual that is EKPO-J_3AEXFCM.
I am updating this in the method PROCESS_ITEM and what I found while debugging is in the class CL_PO_HEADER_HANDLE_MM, in the implementation of IF_FLUSH_TRANSPORT_MM~START, the contents of field u2018my_iteration_countu2019 keeps increasing and becomes 10 and raises this error.
I read few of the related questions raised by others in this forum and understood that this can happen if I try to change the field that is disabled ( greyed) in ME22N. But this field that I am talking about is enabled.
I also tried to move my code of populating the field EKPO-J_3AEXFCM from the PROCESS_ITEM to the enhancement point just above the user exit EXIT_SAPMMO6E_018 but still it doesnu2019t resolve the error.
(We donu2019t want to use User Exit and hence we are trying with BADIs or enhancement point.)
Can anyone please help me with this. I also found an OSS note 1334046 but not sure if that can resolve my issue.
Thanks in advance.
Ameesha.

Hi Ameesha,
i think u need to implement the BADI ME_PROCESS_PO_CUST in SPRO settings.
SPRO>Purchasing>Business Add-in Purchasing-->BAdI: Enhance Processing of Enjoy Purchase Order
try this once.
All check this link.
[Error Message: Data from Business Add-In ME_PROCESS_PO_CUST not transferred;
Hope it helps.
Regards,
Raj

WebPart is raising the following error "Invalid data has been used to update the list item.The field you are trying to update may be read only"

I have created a farm solution and then i deploy it to SharePoint server, the code looks as follow, and i use it to update a page info values (as the current page values represents old info):-
[ToolboxItemAttribute(false)]
public partial class VisualWebPart1 : WebPart
// Uncomment the following SecurityPermission attribute only when doing Performance Profiling using
// the Instrumentation method, and then remove the SecurityPermission attribute when the code is ready
// for production. Because the SecurityPermission attribute bypasses the security check for callers of
// your constructor, it's not recommended for production purposes.
// [System.Security.Permissions.SecurityPermission(System.Security.Permissions.SecurityAction.Assert, UnmanagedCode = true)]
public VisualWebPart1()
protected override void OnInit(EventArgs e)
base.OnInit(e);
InitializeControl();
using (SPSite site = new SPSite(SPContext.Current.Site.Url))
using (SPWeb web = site.OpenWeb())
SPList list = web.Lists["Pages"];
web.AllowUnsafeUpdates = true;
foreach (SPListItem items in list.Items)
items["Author"] = "SharePoint";
items["Created"] = "01/08/2014 01:44 PM";
items.Update();
list.Update();
web.AllowUnsafeUpdates = false;
protected void Page_Load(object sender, EventArgs e)
but when i try adding this web part to a page i got the following error:-
Invalid data has been used to update the list item.The field you are trying to update may be read only
so can anyone advice?

i only changed lines bitween
web.AllowUnsafeUpdates = true;
and
web.AllowUnsafeUpdates = false;
and other parts of code remains without change
so it will updates all pages in current web
yaşamak bir eylemdir

Extracting Data from Essbase using ODI fails with: Cannot calculate file.

I'm try to Extract Data from Essbase using ODI KM (LKM Hyperion Essbase DATA to SQL). I'm using
CalcScript for EXRACTION_QUERY_TYPE. CalcScript in my case resides on Essbase App directory, so I
just specify the name (i.e. FULLEXP) for EXTRACTION_QUERY_FILE. Before creating ODI interface
I ran CalcScript successfully from EAS. Also, ODI and Essbase are on different servers. ODI Agent
is not running on Essbase Server, but ODI Agent has access to file generated by CalcScript.
EPM Fusion Version 11.1.2.2. Essbase running in LINUX and ODI 11g running on Windows Server.
Created the ODI interface where source is my Planning Cube and target is a relational table using SYNOPSIS
MEMORY Engine for staging area. I make it thru the following ODI interface steps OK:
1 - Loading - SrcSet0 - Drop work table
2 - Loading - SrcSet0 - Create work table
3 - Loading - SrcSet0 - Begin Essbase Data Extract.
I then fail at:
4 - Loading - SrcSet0 - Extract Data
I get the following Message in ODI Operators console.
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 1, in <module>
     at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
     at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1013131): Failed to start Asynchronous thread
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
     at java.lang.Thread.run(Thread.java:662)

I'm try to Extract Data from Essbase using ODI KM (LKM Hyperion Essbase DATA to SQL). I'm using
CalcScript for EXRACTION_QUERY_TYPE. CalcScript in my case resides on Essbase App directory, so I
just specify the name (i.e. FULLEXP) for EXTRACTION_QUERY_FILE. Before creating ODI interface
I ran CalcScript successfully from EAS. Also, ODI and Essbase are on different servers. ODI Agent
is not running on Essbase Server, but ODI Agent has access to file generated by CalcScript.
EPM Fusion Version 11.1.2.2. Essbase running in LINUX and ODI 11g running on Windows Server.
Created the ODI interface where source is my Planning Cube and target is a relational table using SYNOPSIS
MEMORY Engine for staging area. I make it thru the following ODI interface steps OK:
1 - Loading - SrcSet0 - Drop work table
2 - Loading - SrcSet0 - Create work table
3 - Loading - SrcSet0 - Begin Essbase Data Extract.
I then fail at:
4 - Loading - SrcSet0 - Extract Data
I get the following Message in ODI Operators console.
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 1, in <module>
     at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
     at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1013131): Failed to start Asynchronous thread
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
     at java.lang.Thread.run(Thread.java:662)

How remove data from OS X10.8.3 and Safari 6.0.4 beyond Delete or Ctrl Del?

How remove data from OS X10.8.3 and Safari 6.0.4 beyond Delete or Ctrl Del?
When I had a Windows OS based machine I had to dig deep into the Directory to find everything I wanted to remove as the delete function did not do so. I don't know if this "digging deeper" action is even necessary in Mac and if it is where I would go in Mac to do so. Is it? If so, how?

I appreciate your clarification inquiry request. My goal was as initially stated, to "find everything I wanted to remove as the delete function did not do so.......if.....digging deeper.....is.....necessary.....and if it is where....go in Mac to do so....(and)...how?"
I have now resolved my data removal inquiry, accomplishing it through use of William Lloyd's post of instructions.
Thank you.

Error reading data from static cursor cache.

Hi,
Does anyone know what causes this error below. It just started happening out of the blue. I'm running Apache Tomcat 4.1 on Win 2000 server with MS SQL Server 2000 database.
Error:
java.sql.SQLException: [Microsoft][SQLServer JDBC Driver]Error reading data from static cursor cache.
Thanks,
TR

hi,
i had a similar sort of error, something along the lines of "error setting up static cursor cache" using the SQL JDBC drivers on Win2K. i deleted the file entries in the TEMP folder of c:\documents and settings\<user>\Local Settings\TEMP and everything was cool after it. i'm not sure what the exact issue is (probably something like maximum folder size had been reached). i ran the FileMon utility from www.sysinternals.com and it reported a DISK_FULL error on a temporary file being read by the process. to cut a long story short, everything is NOW cool.
cheer,
dara

HTTP-500 Error Reading Data from Client!!

I'm trying to create a page where by clients are able to contact us through the portal. So, it's a pretty basic form where I have a text box for the subject, and a text area for the message body.
My problem is when the message body is over a certain size, I'm getting a "portlet cannot be contacted" on my screen. The Apache log comes up with the error:
[error] mod_plsql: /pls/portal/!PORTAL.wwpob_page.show HTTP-500 Error Reading Data from Client!!
I'm not using a windows OS, so the bug that has been talked about previously talked about shouldn't be the problem.
Also, I am using a POST rather than a GET, so I don't think it has to do with the browser (and I have tested this on Firefox and IE 5.5 and IE 6).
Would appreciate any advise.
Thanks, Nicky

Are you using SSL? Maybe, it has to do with it. I encountered a similar problem. It turned up that this read error occurred inside Apache and was caused by a nonstandard-SSL-request by Internet Explorer. te remedy was to add this to the Apache configuration:
SetEnvIf User-Agent ".*MSIE.*" \
nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0
It tells Apache to switch to HTTP/1.0 and to never keep open socket connections with MSIE on SSL connections.
Lycka till!

EVDRE encountered an error retriving data from web server in PROD

Hi friends,
We are checking Evdre reports in BPC production system. We checked few application' EVdre input templates & reports and are fine.
But yesterday evening onwards we are facing below error message.
EVDRE encountered an error retriving data from web server. This message we are getting for all BPC applications in BPC production. There is no short dump in backend.
But when i checked in BPC developement there is no probelm.
We are on BPC7.5 NWsp04 and BI7.01.
In BPC, production,when i try to create evdre template(just after filling
information in evdre builder), immediately getting same error information.
I read few notes, did as per that but sill problem exists. In note, mentioned process dim of particular application and process application. Logout from bpc admin & excel. I did this and, that error message not received for upto 20min. After that i'm getting error. We checked communciation between ABAP layer and bpc, reset IIS also. Still same probelm exists.
Any suggestions pls.
thanks,
naresh

Hi frineds,
SAP OSS team resolved along with our basis guy.
Initially SAP supported notes:
1.1475233 and 1378705 Process all dimensions and applications.
2.1355954 Drop SAP temp tables.
3.1428764 confilict only if you use Oracle 10 g, if you don't, then forget it.
I used 1378705 and problem resolved temporarly, but still exists after 1 day.
There are different reasons for getting the error message. In our case, problem is at backend BW and, BW system running on HP unix OS.
Checked librfc32.dll in the
directory /usr/sap/BP1/DVEBMGS00/exe.
Executed the following MDX statment in MDXTEST transcaction, and it
executed in both the available instances.
SELECT
{[Measures].MEMBERS} ON COLUMNS,
[0MATERIAL].[LEVEL00].MEMBERS ON ROWS
FROM [$ZCO_CDPC].
Even i also don't have clue how SAP resolved this issue.
Regards,
Naresh

Extract data from Essbase using APIs

Hi All
I was going through the API documentation for Essbase and data extraction from Essbase using API.
It seems APIs make use of Report script to extract data from Essbase. This would increae the overhead of writing a report script everytime you need to extract data from Essbase.
Is there any other method to extract/export whole or specific data from essbase using APIs?
How does Excel Add-in retrieves data from essbase without any report script?
Can Provider services be helpful in any way to achieve this?
Please help

Hi,
Its hard to say if there is a faster way without knowing how you're doing it now. A few questions:
- why are you using the API to get at Essbase Data, especially if you've already defined a (some) report scripts?
- if you want to use provider services, vs having to ensure all the libraries and the client are present, why not use the JAPI?
- Without seeing your code, its hard to know why you're getting out of memory errors. What are you doing with the data as you're parsing it from the report?
Grid API exists for the C API, and more noteable the JAPI, but not VB(I'm surprised the VB api still exists).
Why not just use the Java API?
Robb

How to delete a single data from table using control file

I want delete a single row data from table using sql loder control file
Edited by: 977940 on Dec 19, 2012 9:00 PM

977940 wrote:
I want delete a single row data from table using sql loder control file
Edited by: 977940 on Dec 19, 2012 9:00 PMWhy?
And how do you imagine this happening with sqlloader?
The entire purpose of sqlloader is to load data (hence, the name sql*loader*) into a table from an external source. If you want to delete rows from a table, you use the sql DELETE statement.
What is the business problem you are trying to solve?

Is there any way to export IT Resource data from OIM using the export tool?

Hello,
we are trying to migrate an OIM development environment to a preproduction environment and we need to migrate more than 400 IT Resources. We have exported some IT Resources and when we imported them in the preproduction environment their data was not migrated. Is there any way to export IT Resource data from OIM using the export tool? Or is there any other way to do this without doing it by hand?
Thank you for your help
Kind Regards

Well , OIM doesnot provide any such facility to export ITResource data along with ITResource .
Directly updating the DB could be an option ..
Thanks

Problem with uploading data from excel using BDC for tcode f-02

Hi All,
I am uploading data from excel using BDC for tcode f-02. The problem here is, while recording, the values of some fields are recording twice. I dont know why it's happening so. But if I run my abap program, I have to give those fields twice in my excel sheet. Otherwise data does not upload. But it is not the feasible way. We must give those fields once in excel. Please tell me, how I can solve the issue.
With regards,
Rosaline.

Hi,
in BDC each and every action is recording. If your press enter in same screen that also recorded once aging may be this is your case repeating field values will appear. we can solve the problem for repeat fields like below.
suppose in your excel having repeated field X1 X2 X3 the X2 contains repeated field X3 means delete the X3 field.
Now In your itab having X1 and X2 fields. While in the LOOP the ITAB pass the X2 field to repeated the fields.
LOOP at ITAB to WA.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_CURSOR'.
bdcdata_wa-fval = 'RM08M-EBELN'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'INVFO-BLDAT'.
bdcdata_wa-fval = wa-X2." 1st time pass the X2 fields
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'INVFO-BLDAT'.
bdcdata_wa-fval = wa-X2." pass the same value to repeated field
APPEND bdcdata_wa TO bdcdata_tab.
Endloop.
Hope you can understand.
Regards,
Dhina..

Error removing data from MDS using WLST

Similar Messages

Maybe you are looking for