Error reported at power up on Windows 7 - Entry Point Not Found
After logging in, a dialog box pops up 'AppleSyncNotifier.exe - Entry point not found. The report states 'The procedure entry point xmlTextReaderName could not be located in the dynamic link library libxml2.dll. This just seems to have appeared with no changes made to the system Has anyone seen this before?
You're welcome. Glad things are working properly again.
Similar Messages
-
Hello, can anyone help me out there? Im having trouble downloading itunes on my computer.
Ikeep getting a error message reading:
#1 applesyncnotifer.exe- entry point not found.
#2 the procedure entry point sqlite3-wal-checkpoint could not be located in the dynamic link library. sqlite3.d11.
#3 service 'apple mobile device' (apple mobile device)
failed to start. Verify that you have sufficient privileges to start system services.With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck -
Each time I update the software on my iPhone4 I get the following error message on my lap top: AppleSyncNotifier.exe - Entry Point Not Found The procedure enrty point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll
I go on line to find a solution, but it must be a common problem, why has apple not corrected yet?This is the fix I got from discussions and it worked for me. It is copied below. I just did the manual fix which I have underlined. Good luck! Regards, Belle.
This can occur because libmxl2.dll is not in your C:\Program Files\Common Files\Apple\Mobile Device Support folder.
There have been some issues with this and other dlls not being in the right place (or not being everywhere they should be) since the 10.3.1.55 iTunes update.
However, I note that the 10.4 iTunes update is now out - surprisingly quickly - so try installing that, rebooting, and see if your issue is solved.
If it isn't, though, here's the manual fix:-
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well.
I actually had the issue with SQLite3.dll, and the above fix worked for me (I found it in an April 2010 posting!).
I passed on the fix as above for the similar issue with libmxl2.dll to someone who had exactly your problem, and he reported that it fixed it for him. -
Safari.exe Entry point not found - error message.
The procedure entry point... could not be found... When I try to start up Safari on my wife's pc. I deleted and reinstalled...same response...what gives. What else to do?
b noir wrote:
The procedure entry point... could not be found...
What's the precise text of the message please, Roger?
(I suspect you're having an issue with an Apple Application Support dll, but don't know for sure unless I know the details of the error message in this case.)
"Safari.exe - Entry Point Not Found
The procedure entry point
? prototype @ JSImmediate@JSC@@CAPAVJSObject@2@VJSValue@PAVExecState@2@@Z could not be located in the dynamic link library JavaScriptCore.dll."
*I believe I have copied all the text that shows up.*
Robert -
Why is my itunes not installing properly?
I installed itunes day before yesterday, I spent hours last night linking all my music photograph and movie files, its a new windows 8 laptop.
I plugged in my 64GB ipad 3 rebooted it and reloaded all the information I wanted on it, took hours... finally completed this this morning. After this I restarted the laptop to configure my icloud link for the laptop (which I installed last night while I was loading files, I chose to restart later)
on completion I turned my laptop off for a few hours, when I turned it back on I went to itunes to connect my iphone to do the same and I got this message:
iTunes exe - Entry Point Not Found
The procedure entry point
AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not
be located in dynamiclink library F:\Programmes\iTunes.dll
OK
then after pressing 'OK' the following message:
iTunes
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 127)
I went back to apple website to reinstall iTunes, first reinstalled it same again, then unsinstalled it and the reinstalled it, same again.
The same thing happened with my old lap top and I replaced it with this new one at the start of the week.
Has anyone any idea what is going on and how to rectify this problem, I am now going on 3 weeks without iTunes.
Regards,
Damian36I started up and plugged in my iPad and then the following message came up:
iTunes
❗️This iPad cannot be used because the required software is not
Installed. Run the iTunes installer to remove iTunes, then install
the 64-bit version of iTunes.
OK
I then proceeded to the "iTunes64Setup" expanded folder to load "AppleMobileDeviceSupport64"
Started the install and then received this message:
Apple Mobile Device Support
❗️Service 'AppleMobile Device' (Apple Mobile Device)
failed to start. Verify that you have sufficient
Privileges to start system services.
Abort. Retry. Ignore
I tried all tree options, last being ignore.
I continued to download the other 2 you suggested with out any drama.
I did a system restart and then opened iTunes.
Connected my iPad
Then message appears:
iTunes .exe - System Error
❌ The program can't start because CoreAdioToolbox.dll is missing from
Your computer. Try reinstalling the program to fix the problem.
OK
Press OK and then the next message:
iTunes
❌ iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 126)
OK
Any suggestions? -
Crystal Reports 2008-Vista-ERROR-crw32.exe Entry Point Not Found in dll
Hi Experts,
I just installed the Crystal Reports 2008 (with SP0) on my Vista (Home) machine. When I try to start the CR 2008, I am getting the below error message:
Error Title: crw32.exe - Entry Point Not Found
Error Message: The procedure entry point ?PrintLegend@CMapXLegend@CSLib300@@QAEXJJJJJ@Z could not be located in the dynamic link library cslibu-3-0.dll
Here are the things I tried to resolve the above problem:
1) Uninstall and Reinstall the CR 2008. - No change.
2) I configured the DEP to accept Crystal Reports (Performance - Advanced - DEP allow).
None of these seem fix the problem.
Can you please help me kick start the Crystal Reports 2008?
Thanks,
ArunPlease try with this:
Run a command prompt as administrator. From the start menu, select "All Programs", then "Accessories" and right-click on the "Command Prompt" shortcut and choose "Run As Administrator". From here you can use the following command to disable Data Execution Prevention (DEP) with the following command:
bcdedit.exe /set nx AlwaysOff
Keeping your command prompt open, run your setup or other process being stopped by DEP. Then, to turn it back on again, do the same and run the following:
bcdedit.exe /set nx AlwaysOn
Regards,
Shweta -
My iTunes won't open on Windows XP. iTunes.exe - Entry point not found, Error 7 (Windows Error 127)
When I open iTunes, I get a message saying under iTunes.exe - Entry Point Not Found, it says, The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. And I'm not talking about the AppleSyncNotifier.exe. Along with that, I get the message saying, "iTunes was not installed correctly. Please reinstall i Tunes." Error 7 (Windows Error 127). That's why I'm unable to open iTunes. I sure hope to see a solution to those problems soon.
I know I've mentioned this before, but I've now given a little more info to make my explanation more clear.Try this one from Article TS3074
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/TS3074 -
Hi
I have tried to research these problems I am getting, but have not been able to resolve them.
1st is the above DDE Server Windows iTunes.exe - entry point not found.
This only occurs when I try to start iTunes.
if I click ok , several times, iTunes will start but slowly.
If at any time I have to reboot my computer I get
iTunesHelper.exe - the procedure entry point asl_add_log_file could not be located in the dynamic link library ASL.dll
if I click 3 times OK it goes away.
To this end I have uninstalled iTunes and rebooted my machine then gone to iTunes web site and downloaded the latest version.
Installing it but still get the same errors on reboot and trying to run iTunes
Anyone any ideas please.
I have a self build PC it has an Intel core 2 quad Q6000 @ 2.40GHz
Ram 4.00GB
32bit OS
Windows 7 Ultimate SP1
Firewall - Zonealarm
Virus - Zonealarm
Thanks in advance
Steve
Message was edited by: Ybslik
Message was edited by: YbslikTaken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever -
Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help! How do I remove this message every time I start up Windows? Would it help to
re-install Itunes and what version??Refer to this thread - https://discussions.apple.com/message/15685210#15685210
Quick answer "copy the file SQLite3.dll from the C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to the C:\Program Files (x86)\Common Files\Apple\Mobile Device Support folder" -
I've had itunes now for a while.Now when i try and access itunes i get an error of entry point not found.and an error 7 windows error127.Says to reinstall itunes.I do and get the same result.What do I need to do....please help....
Often that's caused by damage to one of the other software components.
I'd try the following document first:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
(If you're running XP, there's a link to the equivalent instructions for that OS in the document.) -
I just recently upgraded to the new itunes and getting this, ADAdPolicyEngine_DidEnterStation, could not be located in the dynamic link library C:|programsFiles(x86|itunes.dll, itunes.exe Entry point not found itunes Error 7 windows errors127
See iTunes launch errors caused by iAdCore.dll.
Review the rest of the user tip if required.
tt2 -
I have been given a new ipod nano to replace my much loved but old ipod. When I plug it into my laptop to sync it I get an error message stating "itunes.exe - entry point not found. The procedure entry point AVCFAAssetCreateWithByteStreanAndOptions could not be located in the dynamic link library
AVFoundationCF.dll" I cannot acces my itunes or download a new versiona as this keeps flashing up. Any ideas? Please help, my life is meaningless without my music!!Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?
-
Since updating to 10.4 I've been getting this error message on computer startup
'AppleSyncNotifier.exe – Entry Point Not Found
The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll.'.
Please help me fix this annoying problem?
belleThis is the fix I got from discussions and it worked for me. It is copied below. I just did the manual fix which I have underlined. Good luck! Regards, Belle.
This can occur because libmxl2.dll is not in your C:\Program Files\Common Files\Apple\Mobile Device Support folder.
There have been some issues with this and other dlls not being in the right place (or not being everywhere they should be) since the 10.3.1.55 iTunes update.
However, I note that the 10.4 iTunes update is now out - surprisingly quickly - so try installing that, rebooting, and see if your issue is solved.
If it isn't, though, here's the manual fix:-
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well.
I actually had the issue with SQLite3.dll, and the above fix worked for me (I found it in an April 2010 posting!).
I passed on the fix as above for the similar issue with libmxl2.dll to someone who had exactly your problem, and he reported that it fixed it for him. -
Error message when clicking on links from thunderbird: Firefox.exe – Entry Point Not found
When I click on any link in a Thunderbird email message I get the error message:
Firefox.exe – Entry Point Not found
The procedure entry point ?DllBlocklist_Initialize@@YAXXZ could not be located in the dynamic link library T:\PQligP sFuvy (X86)\pJPpSox HneiCFv\GwCMqTQ.Oqt.
I tried uninstalling Firefox 27 completely and reinstalling it, and the error is still there. When I uninstall V27 and install the older V26 the error disappears. Id there an issue with V27 trying to work with links from Thunderbird?
I am on a laptop running Windows 8.1 with all current downloads.Thanks for the reply - as best as I can tell it seems to be some kind of incompatibility between Thunderbird V24.3.0 and Firefox V27. If I install Firefox V26 then everything works as it should. I haven't tried installing a previous version of Thunderbird to see if that makes a difference.
-
I see a AppleSyncNotifier.exe - Entry Point Not Found error when my PC starts.
when booting up my computer, even before I try to bring up itunes, I get the following error message:
AppleSyncNotifier.exe - Entry Point Not Found
the procedure entry point ___cfconstantstringclassreference could not be located in the dynamic link library core foundation.dll
But once I click off the message, everything seems to work fine.
how can I correct this problem?
2 IPod 5.1.1
1 IPad 2 wifi
Windows Vista 32Try here > http://www.pchelpforum.com/xf/threads/applesyncnotifier-exe-entry-point-not-foun d.124298/
Maybe you are looking for
-
Using a UIX Template as a Base for a JSP
We are looking to use a UIX template to create our "look and feel" across the application, but we have some pages that just need to be written as JSP's. Is there a way to use a UIX template as a base for JSP pages? or do we have to have a different l
-
I can't open a jpg directly from an outlook email attachment.
I get an error stating "Photoshop CC.exe-Entry point not found".
-
Export & import of sap sid schema for building a new system
Hi, We have a quality BW system which runs on HANA SPS07 (Revision 73). The database contains many schemas in addition to sap<sid>, the rest of the schemas are used through native HANA and are very huge. We are planning to build a new test BW system
-
Log in shows 'network accounts not available'
on my desktop my login window has a red radio button and a tag that says 'network accounts not available' Anyone know what this means?
-
I won't mark my archived, unanswered questions as 'answered'
The 'My Questions' link brings up a list of questions I've posted, with the as-yet unanswered ones at the top of the list, begging to be marked as answered. But they can beg all they want, because they weren't answered and that's that.