Error: Set type Z contains multiple-value attributes

Hi forum,
I have a problem when i try to assign a set type with the same value but diferent name on another set type to the same product category.
This is the detail of the error but i dont know where i have to set this indicator:
If you set this indicator for a particular hierarchy, all categories and set types in this hierarchy are created in the PME.
This gives you the following extended maintenance options at category level:
You can assign set types with multiple-value attributes
You can restrict value ranges and maintain default values for attributes of customer set types.
Any sugerence about this?
Regards and thanks in advance,
Mon

Hi Nelson,
I create two set types, the description is not the problem. I have discover that when i try to assign these attributes in the same set type or in other appears this error.
The set types have the same values. For example:
zcountry1. Values: sp - spain. fr - france.
zcountry2. Values: sp - spain. fr - france.
When i try to configurate the comm_hierarchy in my category appears this error:
Set type zcountry2 contains multiple-value attributes.
Diagnosis
The set type ZGAME5 contains multiple-value attributes. It cannot be assigned to the category as extended maintenance has not been activated.
Procedure
Multiple-value attributes are stored in the PME. If you want to use the set type ZGAME5, you must set the Extended Maintenance Options indicator for the hierarchy.
Extended Maintenance Is Possible for the Hierarchy
Definition
If you set this indicator for a particular hierarchy, all categories and set types in this hierarchy are created in the PME.
This gives you the following extended maintenance options at category level:
You can assign set types with multiple-value attributes
You can restrict value ranges and maintain default values for attributes of customer set types.
Where is this indicator¿? in R3?
So, these are the steps...can anybody help to me?
Regards and thanks in advance.

Similar Messages

Can "SPML Web Service Complex Data Type field" take multiple values ?

In Generic Technology Connector's -SPML design parameters section, Can we give multiple values in SPML Web Service Complex Data Type field?
If not, how can i call methods directly instead of calling them through a values of the "name" attribute of the "complexType" element in SPML Web Service Complex Data Type?
I need 'SPML Web Service Complex Data Type' to hold multiple values.And based on the request it has to initiate appropriate method of action.
Presently i have three methods add,modify and delete which i am calling through a single value of the "name" attribute of the "complexType" element in SPML Web Service Complex Data Type.
I want to replace this single value with multiple menthods , so that a direct interaction between the method,OIM and target can be established.
Edited by: 821054 on 16/02/2011 04:23

Thanks Robert.
You'll need to create your own interface to the webapp database for those kind of data operations
by this, are you speaking of the internal BC database which stores web app schema data? That would be great if it were possible to update that programmatically because I need to use the List (Checkbox List) field type (for the search functionality), but I need to supply the checkbox options from a web app rather than by manually updating the list entered in the Fields view of the web app settings (shown below).
I'm curious if anyone else has tried this?
Again, my reason for needing to use the List (Checkbox List) field type is that the page which processes searches knows to expect a comma separated list for this field type and then appears to be parsing out the individual values for searching out web app items with 1 or more matching values. You're right that text fields (string and multiline) just check for 'string contains' matches, and this would be ok if I was only ever needing to search just one value at a time. Here's an example of what I might do:
Web App item field value (as recorded against the List (Checkbox List) field type:
8294877,8294878
Web App Search value (for this same field):
8294879,8294877,8294885
The search would return this web app item because the field contains 2 (1 or more) individual values even though they were entered into the search field in a different order. If this web app item were just a Text (string or multiline) field, the searched value is not a substring of the web app item's stored value, so it would not find a match. Hence the need to use Checkbox List field type.
The web app will have thousands if not 10s of thousands of records, so dumping them all into one big array or object and searching on the front-end won't be practical (though it works great on smaller datasets).

The 'Access-Control-Allow-Origin' header contains multiple values '*, *', but only one is allowed. Origin 'null' is therefore not allowed access.

Hello. I added custom http response headers to my SP site web config file as follows:
<httpProtocol>
<customHeaders>
<add name="Access-Control-Allow-Methods" value="POST,GET,OPTIONS" />
<add name="Access-Control-Allow-Origin" value="*" />
<add name="Access-Control-Allow-Headers" value="Content-Type,Authorization" />
</customHeaders>
</httpProtocol>
When I try to call any web service, i get these headers two times each:
HTTP/1.1 200 OK
Cache-Control: private, max-age=0
Transfer-Encoding: chunked
Content-Type: application/atom+xml;type=entry;charset=utf-8
Expires: Sat, 01 Mar 2014 19:11:37 GMT
Last-Modified: Sun, 16 Mar 2014 19:11:37 GMT
ETag: "3"
X-SharePointHealthScore: 0
SPClientServiceRequestDuration: 20
SPRequestGuid: b4e77d9c-bfc3-a050-493a-ca5d251d1a72
request-id: b4e77d9c-bfc3-a050-493a-ca5d251d1a72
X-FRAME-OPTIONS: SAMEORIGIN
Persistent-Auth: true
Access-Control-Allow-Methods: POST,GET,OPTIONS
Access-Control-Allow-Origin: *
Access-Control-Allow-Headers: Content-Type,Authorization
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
Access-Control-Allow-Methods: POST,GET,OPTIONS
Access-Control-Allow-Origin: *
Access-Control-Allow-Headers: Content-Type,Authorization
MicrosoftSharePointTeamServices: 15.0.0.4569
Date: Sun, 16 Mar 2014 19:11:37 GMT
and that gives me error from ajax: The 'Access-Control-Allow-Origin'
header contains multiple values '*, *', but only one is allowed. Origin 'null' is therefore not allowed access.
The 'Access-Control-Allow-Origin' header contains multiple values '*, *', but only one is allowed.
Origin 'null' is therefore not allowed access.
Any idea???

Hi Ann,
Please check whether there are duplicate custom headers in your code.
Similar issue for your reference:
http://social.msdn.microsoft.com/Forums/office/en-US/b79b75f4-b46b-46ae-ae29-17a352b6b90b/custom-http-response-headers-for-sp-2013-shown-2-times?forum=sharepointdevelopment
Regards,
Rebecca Tu
TechNet Community Support

Creating multiple profiles, using unified profile types, to store multiple values for same properties

Hi All:
I am trying to create multiple profiles, using unified profile types, to
store multiple values for same properties. Here my intention of using
'unified profile types' is to create multiple profiles (to store multiple
values for a property). All the properties are stored in the same database
maintained by Personalization server. Also, I am trying to use the same
'USER' ejb as profile class/home/pk/jndi.
The scenerio is,
define unified profile types (Business, Vacation) using Personalization
admin tools, using com.beasys.commerce.axiom.contact.User,
com.beasys.commerce.axiom.contact.UserHome,
com.beasys.commerce.axiom.contact.UserPk,
com.beasys.commerce.axiom.contact.User for Profile Class, Home, Pk class,
JNDI name respectively.
Define Property set 'HotelCommerce' with property
HotelProp as single, restricted, text (valid values Single, Double)
Now you can use the attached jsp files to login as a user and try to set the
property value for HotelProp for each profile. As per my understanding, I
was expecting that I can set different values for the property 'HotelProp'
for each profiles. But unexpectedly, all the profiles get the same value.
Question. is it the correct behavior? if yes, how can I achieve this
functionality?
if not, do you see any problem in my scripts?
your answer asap is appreciated. we need to make decision on using
Personalization server v/s developing our own Personalization server!!!:)
thanks,
-rajesh
PS: I have tried 'Unified Profile Example' type too, but that did not work.
[propsettest.jsp]
[home.jsp]

I am trying to create multiple profiles, using unified profile types, to
store multiple values for same properties. Here my intention of using
'unified profile types' is to create multiple profiles (to store multiple
values for a property). All the properties are stored in the same database
maintained by Personalization server. Also, I am trying to use the same
'USER' ejb as profile class/home/pk/jndi.Hello Rajesh,
This is not the purpose of the UUP. The UUP is used to allow existing
database schemas to be aggregated with the existing Weblogic Personalization
Server database schema to provide a single, customized user profile with which
to maintain the user properties (
http://e-docs.bea.com/wlcs/p13n/users.htm#1068901 )
If you want to have properties that change value based on some "profile" or
classification of a user, then you should use classifier rules to change the
user from "OnVacation" to "AtWork" or "AtHome". You can use these classifier
rules to select content for the user or conditionally execute logic (
http://e-docs.bea.com/wlcs/p13n/rules.htm )
Ture Hoefner
BEA Systems, Inc.
1655 Walnut Street; suite 200
Boulder, CO 80302
www.beasys.com

Determining uniqueness in a multiple value attribute

Are matching rules used in determining whether or not two values in a multiple value attribute are duplicates?
I have an attribute with EQUALITY caseExactMatch as a matching rule, but I can't add two values like:
xxx/AAA
XXX/AAA
I would think that the matching rule would be applied and the two values would be determined to be unique.
If matching rules are not applied when values are added, why not?
Note: IBM corrected this problem in one of their releases.

Sorry for the late response. It looks like this is possible without using a matching rule. In DSCC, create an attribute with type IA5String.
$ ldapsearch -p 1111 -D 'cn=directory manager' -w password -b cn=schema -T cn=* | grep -wi csstring2
attributeTypes: ( csstring2-oid NAME 'csstring2' DESC 'ia5string' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 X-ORIGIN 'user defined' )
objectClasses: ( customoc-oid NAME 'customoc' DESC 'testing csstring and csstring2' SUP top STRUCTURAL MAY ( csstring2 $ csstring ) X-ORIGIN 'user defined' )
$ ldapsearch -p 1111 -D 'cn=directory manager' -w password -b dc=sun,dc=com uid=a csstring2
version: 1
dn: uid=a,dc=sun,dc=com
csstring2: AAAA
csstring2: aaaa
csstring2: AAAA/qqqqqqqqq
csstring2: AAAA/qqqqqQqQq

How to map single context value attribute to multiple value attributes?

Hello,
is there any way to map a single value attribute
from view's context into several value attributes
in controller's context?
The business context of what I want to achieve
is the following: I have a view which can be called
in two modes: read only (RO) and read-write (RW).
The input parameters to the view are the same for
both modes, however when in RO mode, the view calls
a different set of web services than when called
in RW mode. Before calling each of the web services
I need to populate their context value attributes
with appropriate input values.
I know I can do it in Java code, but is it possible
to do it without any programming (doing it in the
source code is prone to errors)?
Any help highly appreciated.
Greetings,
Tomek.

Hi Kishore,
than you very much for your kind help.
I have already created a value attribute of type
boolean and mapped it into the read-only property
of the UI elements. This however does not solve all
of the problems... I will describe it with an
example:
Let's say the form I want to implement will be
used to: create (read-write mode), update (read-
write mode) or show (read-only mode) customer's
data. The customer's data is complex (lots of
data, including tree structures).
The problem is that:
- when the form is called in read-only mode,
it should populate its fields with values
provided by the getCustomerData web service,
- when the form is called to create a new
customer (in read-write) mode, it should
not use the getCustomerData web service.
Instead it should map the input values
entered by the user into input parameters
of the createNewCustomer web service,
- when the form is called to update customer's
data, it should first display values returned
by the getCustomerData web service, and then
it should map the modified values entered by
the user into input parameters of the
updateCustomer web service,
In all the above cases I must map my view's
context data to different controller's context
elements. Doing it directly in the source code
is not a nice solution. Is there any other
way to achieve this?
Calling a form in different modes in not an
unusual thing, so I was hoping that maybe
there are any built-in mechanisms that would
solve the obove problem...
Greetings,
Tomek.

Searching Web Apps with Data Source fields containing multiple values

I have a Web App with a field allowing multiple values to be entered similar to the checkbox list. I need to restrict allowed values to a large, finite list of values currently stored in another Web App as the data source. I can't apply the Data Source field type as that only allows single value selection. I also need to be able to use the Web App Search form to search for items containing 1 OR more values in this field (the search functionality of a checklist field type). Here's what I've tried for field types:
Text (string) or Text (multiline) field type - By saving a list of comma separated values (the same way that checkbox list outputs) to a text input or textarea, the search logic only searches for exact string (including commas) and doesn't parse the individual values.
List (checkbox list) field type - This allows me to search multiple values using OR logic, but the web app will only store values that have been entered as options in the actual web app field setup. I tried using a checkbox list with minimal or empty options hoping that whatever values I sent over in a comma separated string value would still get stored, but because the values came from my Web App data source and not the list of options stored with the field, they were not saved.
Has anyone found a way to do this?
My other question is about how I might use a similar multi-value field as described above but return search results containing items with ALL selected values for that field (AND logic).
Can anyone enlighten me to the inner workings of BC web app search logic?

Thanks Robert.
You'll need to create your own interface to the webapp database for those kind of data operations
by this, are you speaking of the internal BC database which stores web app schema data? That would be great if it were possible to update that programmatically because I need to use the List (Checkbox List) field type (for the search functionality), but I need to supply the checkbox options from a web app rather than by manually updating the list entered in the Fields view of the web app settings (shown below).
I'm curious if anyone else has tried this?
Again, my reason for needing to use the List (Checkbox List) field type is that the page which processes searches knows to expect a comma separated list for this field type and then appears to be parsing out the individual values for searching out web app items with 1 or more matching values. You're right that text fields (string and multiline) just check for 'string contains' matches, and this would be ok if I was only ever needing to search just one value at a time. Here's an example of what I might do:
Web App item field value (as recorded against the List (Checkbox List) field type:
8294877,8294878
Web App Search value (for this same field):
8294879,8294877,8294885
The search would return this web app item because the field contains 2 (1 or more) individual values even though they were entered into the search field in a different order. If this web app item were just a Text (string or multiline) field, the searched value is not a substring of the web app item's stored value, so it would not find a match. Hence the need to use Checkbox List field type.
The web app will have thousands if not 10s of thousands of records, so dumping them all into one big array or object and searching on the front-end won't be practical (though it works great on smaller datasets).

Self defined type how to create value attribute

Hello!
How can I create a new context "value attribute" if its
type is doesn't exist in the drop down list
where you can choose either a primitive data types
or a java Type. It is an self defined class.
It's name is "Notebook". I want to bind all the Notebooks
with a value attribute. The method returns a Notebooks-Array.
How can I deal in such cases?
Regards
sas

Hi,
You need to put your java file inside src-->your package. As you said it is already there, then try to reload and rebuild your project. It must show in the java native types when you browse.
Even check the package statement of your java file.
thanks & regards,
Manoj

Visio Drawing Using Data Graphics with data that has a field that contains Multiple Values.

I am working on creating a drawing for SMTP connectors. I decided I would use a Data Graphic connecting to a spreadsheet. In the spreadsheet there are a few fields that are Multi-Value fields. For instance SmartHosts contains multiple Ip
address. I am trying to get this to format things so that the IPs show on the next line down instead of continuing on the same line until it wraps.
Does anyone know a way I could do this?
Jeff C

Hi Jeff,
Arrange the IP values in spreadsheet using Alt+Enter (Use this key pair as a separator between two IP values). Now link this spread sheet to Visio. The values should appear in the same manner in data graphics as your expectation.
Let me know if you meant something else.
Thanks,
Dheeraj

Error single row subquery returns multiple values

Hi All,
I have a below query. This is query is throwiing error like single row subquery is returing more than number of records. That subquery is in my SELECT statement query. I have a value like 'tests'. That test contains more than one record. I am fetching that 'tests' child values from this query. If the test contains only one child at that time it is working fine. Can anyone share with how update this query?
SELECT
    czpn.FEATURE_TYPE,
    czci.PS_NODE_NAME,
    DECODE(czci.VALUE_TYPE_CODE,2,czci.ITEM_VAL,
                                3, NVL((SELECT
                                         lines_config.PS_NODE_NAME
                                     FROM
                                         CZ_CONFIG_ITEMS lines_config
                                     WHERE
                                         lines_config.PARENT_CONFIG_ITEM_ID = czci.CONFIG_ITEM_ID
                                         AND lines_config.CONFIG_HDR_ID = czci.CONFIG_HDR_ID
                                         AND lines_config.CONFIG_REV_NBR = czci.CONFIG_REV_NBR),
                                    DECODE(czci.ITEM_NUM_VAL,1,'',czci.ITEM_NUM_VAL)),
                                0,NVL(czci.ITEM_NUM_VAL,'')) NODE_VALUE
FROM
    CZ_CONFIG_ITEMS czci,
    CZ_PS_NODES czpn
WHERE
    czpn.PERSISTENT_NODE_ID = czci.PS_NODE_ID
    AND czci.CONFIG_HDR_ID = 1827349
    AND czci.CONFIG_REV_NBR = 1
    --AND czci.VALUE_TYPE_CODE <> 4
    AND czpn.FEATURE_TYPE IS NOT NULL
    --AND czci.PS_NODE_ID = 356474
    AND czpn.DEVL_PROJECT_ID = (SELECT MAX(ps_devl1.DEVL_PROJECT_ID) FROM CZ_DEVL_PROJECTS ps_devl1, CZ_PS_NODES ps_devl, CZ_CONFIG_ITEMS ps_config_sub
                                     WHERE (ps_devl.PERSISTENT_NODE_ID = ps_config_sub.PS_NODE_ID
                                     AND ps_config_sub.PARENT_CONFIG_ITEM_ID = (SELECT ps_config_sub1.CONFIG_ITEM_ID FROM CZ_CONFIG_ITEMS ps_config_sub1
                                                                                 WHERE ps_config_sub.CONFIG_HDR_ID = ps_config_sub1.CONFIG_HDR_ID
                                                                                AND ps_config_sub.CONFIG_REV_NBR = ps_config_sub1.CONFIG_REV_NBR
                                                                                 AND ps_config_sub1.PS_NODE_NAME = 'ACCESSORIES'))
                                    AND ps_devl1.DEVL_PROJECT_ID = ps_devl.REFERENCE_ID
                                     AND ps_config_sub.CONFIG_HDR_ID = czci.CONFIG_HDR_ID
                                     AND ps_config_sub.CONFIG_REV_NBR = czci.CONFIG_REV_NBR)
    AND czci.PS_NODE_NAME = 'tests'Thanks

Hello,
This should work:
SELECT
    czpn.FEATURE_TYPE,
    czci.PS_NODE_NAME,
    DECODE(czci.VALUE_TYPE_CODE,2,czci.ITEM_VAL,
                                3, NVL((SELECT
                                         lines_config.PS_NODE_NAME
                                     FROM
                                         CZ_CONFIG_ITEMS lines_config
                                     WHERE
                                         lines_config.PARENT_CONFIG_ITEM_ID = czci.CONFIG_ITEM_ID
                                         AND lines_config.CONFIG_HDR_ID = czci.CONFIG_HDR_ID
                                         AND lines_config.CONFIG_REV_NBR = czci.CONFIG_REV_NBR
                                         AND ROWNUM <= 1),
                                    DECODE(czci.ITEM_NUM_VAL,1,'',czci.ITEM_NUM_VAL)),
                                0,NVL(czci.ITEM_NUM_VAL,'')) NODE_VALUE
FROM
    CZ_CONFIG_ITEMS czci,
    CZ_PS_NODES czpn
WHERE
    czpn.PERSISTENT_NODE_ID = czci.PS_NODE_ID
    AND czci.CONFIG_HDR_ID = 1827349
    AND czci.CONFIG_REV_NBR = 1
    --AND czci.VALUE_TYPE_CODE 4
    AND czpn.FEATURE_TYPE IS NOT NULL
    --AND czci.PS_NODE_ID = 356474
    AND czpn.DEVL_PROJECT_ID = (SELECT MAX(ps_devl1.DEVL_PROJECT_ID) FROM CZ_DEVL_PROJECTS ps_devl1, CZ_PS_NODES ps_devl, CZ_CONFIG_ITEMS ps_config_sub
                                     WHERE (ps_devl.PERSISTENT_NODE_ID = ps_config_sub.PS_NODE_ID
                                     AND ps_config_sub.PARENT_CONFIG_ITEM_ID = (SELECT ps_config_sub1.CONFIG_ITEM_ID FROM CZ_CONFIG_ITEMS ps_config_sub1
                                                                                 WHERE ps_config_sub.CONFIG_HDR_ID = ps_config_sub1.CONFIG_HDR_ID
                                                                                AND ps_config_sub.CONFIG_REV_NBR = ps_config_sub1.CONFIG_REV_NBR
                                                                                 AND ps_config_sub1.PS_NODE_NAME = 'ACCESSORIES'))
                                    AND ps_devl1.DEVL_PROJECT_ID = ps_devl.REFERENCE_ID
                                     AND ps_config_sub.CONFIG_HDR_ID = czci.CONFIG_HDR_ID
                                     AND ps_config_sub.CONFIG_REV_NBR = czci.CONFIG_REV_NBR)
    AND czci.PS_NODE_NAME = 'tests'Where this is restricting the records returned by your columnar subquery to one record with ROWNUM.

How to supress Zero in NUMC data type which contains some values as Char.

Hello Friends,
Some custom fields have been added in table BUT000 ,
out of which one field has data type as NUMC..
When i see some of the entries in the that field, it has values like '0000000000000000ENT'.
I want to supress Leading zeros of that.
i tried using
1 ) FM CONVERSION_EXIT_ALPHA_OUTPUT &
          CONVERSION_EXIT_ALPHA_INPUT .
2 ) Also tried coding like this:
data:var1 type ZBU_00LV36AT,           "this field has data type NUMC of length 40
       var2(40) type N.
var1 ='00000000ENTRY'.
VAR2 = VAR1.
SHIFT VAR2 LEFT DELETING LEADING '0'.
Nothing works ...gives output as blank.
Is there any solution for it....
Any valuable asnwer will be rewarded...
Regards,
Mayank

Hi Marcin,
I have tried i think problem it solved with your solution.
Let me try for some more cases if it works fine i will get back to forum.
Regards,
Mayank

Creating Profile type report that hold fields with multiple values

Really hoping someone can please help me out as I am very new to Crystal Reports.
We use Maximizer CRM and we have been in need of some custom reports to rule out risk for regulators. I contacted Max and they suggested the only possible way is to create through Crystal. Its been almost one month already and I still cannot for the likes of me get this report operating properly. I have been inside and out on all sorts of forums, posted topics but no luck! So I will give it one more attempt in hopes that one of you geniuses can show me the way.
In Maximizer CRM there is date, numeric, alphanumric and table. Our table fields items can be set to either single value or multi-value. So in crystal i did a default join of Client.tbl and the user-defined fields from view and joined the client id and contact number from all the view fields to client table. See Image:
and I have dragged all the relevant fields in rows (in details section) rather then columns because we would be reporting on more then 1 record at a time. My problem is - If there is a table with multiple items selected (values), the records triple in count and it will show the same record over and over with just single field value changing at a time.
The formula field you see in the image is from when I posted a discussion and Abhilash assisted me by providing the formulas I should add:
1) Create a formula with this code and place this on the Details Section:
whileprintingrecords;
stringvar s := s + {field_with_multiple_values} + ", ";
2) Next, move all the fields (except the formula field above) from the Details section to the Report Footer
3) Create a formula with this code and place this on the Report Footer. This field would replace the existing field that contains multiple values:
whileprintingrecords;
stringvar s;
Left(s, len(s)-2);
This method is not working out for this type of report. When I add the formula Crystal is still counting my 2 records as 5 records but I can only view it as a single record and the multi-field has all the values for both records and displaying as a single record. See image:
Can anyone please assist and advise where I am going wrong?
-Jared

Hi Jared,
Thanks for taking down memory lane that is Maximizer. Nice to see their table structure hasn't been simplified in the last 20 years.
If I understand what's happening, you should only see 2 records and not 5. That means your joins are creating duplicate records. For now I'm going to skip over trying to optimize your query because I still have bad dreams of linking Maximizer tables.
There are a couple of ways to work around the duplicates, one is to create a group and instead of having your formula in the Detail section, put it in the Group Header. The question is what would you create your group on that would get you a unique record?
If you know where the duplicates are coming from, create a Record Selection Formula that will remove the duplicates.
There is also the menu option Database | Select Distinct Records. I've never really had success with this one but there's no harm in giving it a shot.
I would have you try and find which table or combination of tables is generating the duplicates but that requires playing with your links. Normally I'd start by adding one table at a time and dropping one field onto the report. If it doesn't repeat then add another table and field and repeat until you get your duplicates. Once you know where they are coming from then you can either drop that table from your query or create a selection formula that removes the duplicates.
Good luck,
Brian

EEWB (attributes from product set type)

Hi gurus,
I have a question about EEWB. Could you please help me.
There is possibility to add components (attributes from product set type) at item level:
Business object - BUSINESS_TRANSACTION
Extension Type - ADD_NEW_ITEM_COMPONENT.
Ive created an extension with certain set type (it consists of 2 attributes). Everything was ok. New fields with 2 attributes have been added to new tab in a sales orders item.
But then Ive added 1 new attribute to the same set type. So I think this new attribute is to appear on the same tab with 2 other attributes. But it doesn'tt!
Ive regenerated my extension, Ive recalled wizard for this extension. Nothing has changed. There is still only 2 attribute in the tab.
So is it normal situation and is it necessary to create a new extension in order new fields to appear in a tab? Or I can do something else without creating the new extension?
So could you help me and give any solutions. Appreciate any help.
And thanks in advance.
Sunny.

It works already.

IDOC type abc contains error (Unable to read segments)

Hi All
While importing IDOC in IR i am getting error "IDOC type abc contains error (Unable to read segments)".
We have added one extra field into our existing customised IDOC into R3 and successfully releases. Previous IDOC having version 640 and modified IDOC having version 700.
In IDX2 i have successfully imported IDOC metadata and one extra added field also i can see there. But while importing into IR its showing me error "IDOC type abc contains error (Unable to read segments)".
I have tried to import different IDOC using same user and it was successfully imported means there is no authorization error.
Please suggest me where could be the problem?
Regards
Dheeraj Kumar

Do The following:
1) Delete the IDX2 entry and try to reimport once again....and in the IR also do the same.
2) Have a look into this SAP Note- 742093
3) Check the IDX1 entry , RFC destination entry... may be not pointing correctly.
4) If any field which is mandatory in the idoc must not be disabled...take care about it.

Using multiple values in a where clause, for values only known at runtime

Dear all
I am creating a PL/SQL program which returns multiple rows of data but only where it meets a set id values that a user has previously chosen. The id values are stored in an associative array and are chosen by a user in the preceding procedure at run time.
I know all the table and column names in advance. The only things I don't know are the exact number of ids selected from the id column and what their values will be. This will only be known at runtime. When the procedure is run by the user it prints multiple rows of data to a web browser.
I have been reading the following posting, which I understand to a large extent, Query for multiple value search But I cannot seem to figure out how I would apply it to my work as I am dealing with multiple rows and a cursor.
The code as I have currently written it is wrong because I get an error not found message in my web browser. I think the var_user_chosen_map_list_ids in the for cursor loop could be the problem. I am using the variable_user_chosen_map_list_ids to store all the id values from my associatative array as a string. Which I modified from the code that vidyadhars posted in the other thread.
Should I be creating a OPEN FOR ref cursor and if so where would I put my associative array into it? At the moment I take the value, turning it into a string and IN part in the WHERE clause holds the string, allowing the WHERE clause to read all the values from it. I would expect the where clause to read everything in the string as 1 complete string of VARCHAR2 data but this would not be the case if this part of the code at least was correct. The code is as follows:
--Global variable section contains:
var_user_chosen_map_list_ids VARCHAR2(32767);
PROCEDURE PROCMAPSEARCH (par_user_chosen_map_list_ids PKG_ARR_MAPS.ARR_MAP_LIST)
IS
CURSOR cur_map_search (par_user_chosen_map_list_ids IN NUMBER)
IS
SELECT MI.map_date
       MT.map_title,
FROM map_info MI,
     map_title MT,
WHERE MI.map_title_id = MT.map_title_id
AND MI.map_publication_id IN
(var_user_chosen_map_list_ids);
var_map_list_to_compare VARCHAR2(32767) := '';
var_exe_imm_map VARCHAR2(32767);
BEGIN
FOR rec_user_chosen_map_list_ids IN 1 .. par_user_chosen_map_list_ids.count
LOOP
   var_user_chosen_map_list_ids := var_user_chosen_map_list_ids ||
   '''' ||
   par_user_chosen_map_list_ids(rec_user_chosen_map_list_ids) ||
END LOOP;
var_user_chosen_map_list_ids := substr(var_user_chosen_map_list_ids,
                                        1,
                                        length(var_user_chosen_map_list_ids)-1);
var_exe_imm_map := 'FOR rec_search_entered_details IN cur_map_search
LOOP
htp.print('Map date: ' || cur_map_search.map_date || ' Map title: ' || cur_map_search.map_title)
END LOOP;';
END PROCMAPSEARCH;EXECUTE IMMEDIATE var_exe_imm_map;
I would be grateful of any comments or advice.
Kind regards
Tim

I would like to thank everyone for their kind help.
I have now successfully converted my code for use with dynamic SQL. Part of my problem was getting the concept confused a little, especially as I could get everything work in a static cursor, including variables, as long as they did not contain multiple values. I have learnt that dynamic sql runs the complete select statement at runtime. However even with this I was getting concepts confused. For example I was including variables and the terminator; inside my select string, where as these should be outside it. For example the following is wrong:
     TABLE (sys.dbms_debug_vc2coll(par_user_chosen_map_list_ids))....
AND MI.map_publication_id = column_value;';Where as the following is correct:
     TABLE (sys.dbms_debug_vc2coll('||par_user_chosen_map_list_ids||'))....
AND MI.map_publication_id = column_value';PL/SQL is inserting the values and then running the select statement, as opposed to running the select statement with the variables and then accessing the values stored in those variables. Once I resolved that it worked. My revised code is as follows:
--Global variable section contains:
var_user_chosen_map_list_ids VARCHAR2(32767);
var_details VARCHAR(32767);
PROCEDURE PROCMAPSEARCH (par_user_chosen_map_list_ids PKG_ARR_MAPS.ARR_MAP_LIST)
IS
BEGIN
FOR rec_user_chosen_map_list_ids IN 1 .. par_user_chosen_map_list_ids.count
LOOP
   var_user_chosen_map_list_ids := var_user_chosen_map_list_ids ||
   '''' ||
   par_user_chosen_map_list_ids(rec_user_chosen_map_list_ids) ||
END LOOP;
var_user_chosen_map_list_ids := substr(var_user_chosen_map_list_ids,
                                        1,
                                        length(var_user_chosen_map_list_ids)-1);
var_details := FUNCMAPDATAFIND (var_user_chosen_map_list_ids);
htp.print(var_details);
END PROCMAPSEARCH;
FUNCTION FUNCMAPDETAILS (par_user_chosen_map_list_ids IN VARCHAR2(32767)
RETURN VARCHAR2
AS
TYPE cur_type_map_search IS REF CURSOR;
cur_map_search cur_type_map_search;
var_map_date NUMBER(4);
var_map_title VARCHAR2(32767);
begin:
OPEN cur_map_search FOR
'SELECT MI.map_date,
       MT.map_title
FROM map_info MI,
     map_title MT,
     TABLE (sys.dbms_debug_vc2coll(' || par_user_chosen_map_list_ids || '))
WHERE MI.map_title_id = MT.map_title_id
AND MI.map_publication_id = column_value';
LOOP
FETCH cur_map_compare INTO
var_map_date,
var_map_title;
var_details := var_details || 'Map date: '||
                    var_map_date ||
                    'Map title: ' ||
                    var_map_title;
EXIT WHEN cur_map_compare%NOTFOUND;
END LOOP;
RETURN var_details;
END FUNCMAPDETAILS;Kind regards
Tim

Error: Set type Z contains multiple-value attributes

Similar Messages

Maybe you are looking for