Error SSL

Hello
I have the Vibe 3.4 Alt Linux i586 (p7)
workstation Windows7 (x86) MSOffice 2010
From Vibe Desktop\Add-in open documents Word\Exel edit, save and close Word\Exel.
Trying to re-open the document Vibe Desktop\Add-in returns an error no SSL connection.
Overload the Vibe 3.4 SSL connection is?

POODLE patch set:
openSSL 1.0.1k
Windows 7 Enterprise SP1
MSOffice 2010SP2

Similar Messages

FRM-41211 Integration Error SSL - OracleAS 10g

Hi.
I have error Frm-41211 Integration Error SSL Failure Running Another Product error while calling a report from web form in oracleAS 10g.
I have problem with RUN_REPORT_OBJECT in web forms.
I have error: FRM-41211 SSL integration error .....
OracleAS server began on Windoes XP SP2.
Do you help me ?

Hi,
I remember having seen this issue in teh apst. My best recommendation is to work with customer support (metalink.oracle.com)
Frank

FRM-41211 Integration Error SSL - Oracle Forms 10g

Hi all.
I have FRM-41211 Integration Error SSL Failure Running Another Product error while calling a report from web form in oracleAS 10g.
I have problem with RUN_REPORT_OBJECT in web forms in this code:
=====================================================
DECLARE
BEGIN
repid := find_report_object('MODULE21');
v_rep := RUN_REPORT_OBJECT(repid);
-- jobid := substr(v_rep, length('rep60_WS70004')+2, length(v_rep));
-- web.show_document('/reports/rwservlet/getjobid'||jobid||'?server=rep3945','_blank');
END;
=====================================================
I have error: FRM-41211 SSL integration error .....
OracleAS 10g server began on Windows XP SP2.
Do you help me ?
Very thanks !!

Do you help me ?
Thanks.

FRM-41211 Integration error SSL failure

Hello
Environment Client/Server Developer 6i.
i installed developer on a new clinet machine to rum my application. every thing is fine but when he tries to run any report the following error occured:-
FRM-41211 Integrarion error SSL failure runing another product.
and i have re-install the devloper but the error is stand.
any solution?
regards
aaks

As Petr said make sure you're reports25_tmp is set in your registry and that the directory exists AND you have the rights to write to that directory.
You can also get this error if you try to issue a 2nd asynchronous run_product call to run a report and there is another one running. For this, Oracle has two 'solutions'.
1) Do not run more then one asynchronous report per session
or
2) Use a delay loop before calling the next report.
It's been my experience that #2 is worthless as, if it works, is doing pretty much the same thing as #1. I really hope this gets fixed (for good) at some point...somehow. <G>
Chad

FRM-41211: Integration Error: SSL failure running another product Error

Hai,
I am developing POS Application in Oracle(Forms6i/Reports6i). I design the Invoice Print Format in Reports6i and call from the Invoice Form. When the
user save the Invoice I Commit the Invoice and call the Invoice Report for Printing Immediately. I use Epson TM U210B Label Printer for Billing. Sometimes the Invoice Print is not coming in the Printer and it gives the
following error(especially the First print after restart the computer).
FRM-41211: Integration Error: SSL failure running
another product
After that if you print further for transaction no plm. only it gives the error first time of print
So Please give the solutions immediately. I am waiting for Ur favourable Reply.
Ur's Shahul

As Petr said make sure you're reports25_tmp is set in your registry and that the directory exists AND you have the rights to write to that directory.
You can also get this error if you try to issue a 2nd asynchronous run_product call to run a report and there is another one running. For this, Oracle has two 'solutions'.
1) Do not run more then one asynchronous report per session
or
2) Use a delay loop before calling the next report.
It's been my experience that #2 is worthless as, if it works, is doing pretty much the same thing as #1. I really hope this gets fixed (for good) at some point...somehow. <G>
Chad

Run report --- Integration Error ----SSL failure

I have a form that call a report through the Run_Product Built, this works fine on Developer 6 version, but after I upgraded to 6i, everytime I press the buttonn that call the report, an error message will appear that say "FRM-41211 Integration Error SSL failure running another product" after the Report Background Engine appeared. And the report will not start.
But if I press the button again, all will be fine.
Does anyone know what happens ?
PLease help!!!!

It is a bug in Forms 6i and possible workaround (from Metalink) is:
WORKAROUND as follows :
This brings up the Background Engine on startup and minimizes it.
1. Create a shortcut for rwrbe60.exe and do a CTRL+C to copy it.
2. Right click on the TASK BAR at the bottom of the screen and get the TASKBAR
Properties box up.
3. Select ADVANCED
4. Expand Tree for PROGRAMS.
5. Click of STARTUP folder.
6. Do a CTRL+V to Paste in the Shortcut to rwrbe60.exe.
7. Right Click on Shortcut and select Properties.
8. Click Shortcut Tab.
9. Make sure of the following fields are as follows:
TARGET : {drive}:\{path}\rwrbe60.exe /c
START IN : Is the location of your Reports and Forms.
SHORTCUT KEY : None
RUN : MINIMIZED

Integration error SSL failure running another product. - Urgent

Anybody knows what could be the possible problem and how to solve it. This error is coming when I am running RUN_PRODUCT built-in forms 6i, that application was running for 2 years in Forms 5, without any problem.
I have included the message what Forms doucmentaion had.
FRM-41211: Integration error: SSL failure running another product.
Cause: There is a problem detected when launching another product.
Action: Check the RUN_PRODUCT built-in.
Level: 99
Type: Error
null

I got this error when I was using 4.5, it may be caused by the
correctness of report_path in registry.
Regards,
George
Anybody knows what could be the possible problem and how to solve it. This error is coming when I am running RUN_PRODUCT
built-in forms 6i, that application was running for 2 years in
Forms 5, without any problem.>I have included the message what
Forms doucmentaion had.>FRM-41211: Integration error: SSL
failure running another product.>Cause: There is a problem
detected when launching another product. >Action: Check the
RUN_PRODUCT built-in. >Level: 99 >Type: Error >null

Integration error SSL failure running another product

Dear All,
I am facing some problem while running reports from forms
SERVER:
•     OPERATING SYSTEM: Windows.8
•     Database: ORACLE 11g
•     Forms & Reports = 6i.
In form when click any report button to call report some time error comes.
FRM-41211: integration error SSL failure running another productAnd user can not print the report,

Forms/Reports 6i on Windows 8? I very much doubt that this is going to work. The last supported OS for Forms/Reports 6i was Windows XP.
You might have some luck with a non-supported workaround:
http://windows7bugs.wordpress.com/2012/08/25/windows-8-oracle-developer-suite-6i-patch-18/

Integration Error:SSL failure running another product.In DeveloperSuite 10g

I'm using DeveloperSuite 10g. I'm trying run the report from Forms but when I'm
clicking on button to run report using RUN_REPORT_OBJECT I'm getting following
error :
Integration Error : SSL failure running another product.
Can any one explain why I'm getting this error.
Regards
Alpesh.

Hi alpesh
I think you are good at oracleDS 10g and it is running on your machine successfully. But I am not able to run any form on my system.
My OS is Win XP with service Pack 2
Installed Oracle Database 10g
Installed Oracle DS 10g
Able to run reports on paper layout and web layout, But can not run forms. Error is shown on the IE Ver 7. Only source code is displayed. can you help me out from this.

Error : FRM-41211 : Integration Error: SSL Failure Running Another Product

Hi All
I am using Forms & Reports 10g.
I have a report .And i am trying to call in my forms and also i am passing parameters.
But i am getting this error :
My Code is :-
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
plid ParamList;
vParamValue number;
BEGIN
plid := Get_parameter_List('tmp');
IF NOT Id_Null(plid) THEN
Destroy_parameter_List( plid );
END IF;
plid := Create_parameter_List('tmp');
Add_Parameter(PLid, 'P_Block', Text_Parameter, :block_query.item_block);
Add_Parameter(PLid, 'P_Category', Text_Parameter, :block_query.item_category);
Add_Parameter(PLid, 'P_Dept', Text_Parameter, :block_query.item_dept);
Add_Parameter(PLid, 'P_Floor', Text_Parameter, :block_query.item_floor);
Add_Parameter(PLid, 'P_IP', Text_Parameter, :block_query.item_ip);
Add_Parameter(PLid, 'P_Room', Text_Parameter, :block_query.item_room);
Add_Parameter(PLid, 'P_Userid', Text_Parameter, :block_query.item_usr_id);
Add_Parameter(PLid, 'PARAMFORM', Text_Parameter, 'NO');
repid := FIND_REPORT_OBJECT('REPORT_Query');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER, 'paramform=no');
v_rep := RUN_REPORT_OBJECT(repid,plid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
WEB.SHOW_DOCUMENT('http://A_F2_ITT_PC_4.AAHOS.LOCAL:8890/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?
*'||'server=Report_server_name&P_parameter='||'&block='''||:block_query.item_block*
*||'&category_name='''||:block_query.item_category*
*||'&dept='''||:block_query.item_dept*
*||'&floor='''||:block_query.item_floor*
*||'&ip_address='''||:block_query.item_ip*
*||'&room='''||:block_query.item_room*
*||'&usr_id='''||:block_query.item_usr_id*
*||'&paramform=no');*
End;
And the error i am getting is :- FRM-41211 : Integration Error: SSL Failure Running Another Product

hi
please try something like this.
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
plid ParamList;
vParamValue number;
BEGIN
plid := Get_parameter_List('tmp');
IF NOT Id_Null(plid) THEN
Destroy_parameter_List( plid );
END IF;
plid := Create_parameter_List('tmp');
add_parameter(plid,'p_parameter',text_parameter,to_char(:block.item));
Add_parameter(plid, 'PARAMFORM', TEXT_parameter, 'NO');
repid := FIND_REPORT_OBJECT('REPORT6');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER, 'paramform=no');
v_rep := RUN_REPORT_OBJECT(repid,plid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://Machine_Name:8889/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?
'||'server=repserver&P_parameter='||:block.item||
'&paramform=no');
END;

Problem to configure Blink Pro (App). Error SSL certificate verification error (PJSIP_TLS_ECERTVERIF) (503)

Problem to configure Blink Pro (App). Error SSL certificate verification error (PJSIP_TLS_ECERTVERIF) (503)

Hi, William
My question is if you can help me and support me to configure the Blink Pro App, I have a Mac Book Air, OS X 10.9.1.
hope for your answer

Firefox gives me an error (SSL protocol has been disabled) when every I go to a site that requires a user name/password; how do I fix it

Everytime I try to log on to any website that requires a username & password, I receive the following error: SSL protocol has been disabled. I have tried all of the suggested solutions to this issue - but to no avail. I cannot log on to yahoomail. gmail, hotmail, ebay, paypal, or any other site that requires a user name and pass word. Internet Explorer works just fine - and again I have tried all the solutions suggested on the firefox support forum - but none have worked
== URL of affected sites ==
http://www.yahoo.com
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.5; InfoPath.2; .NET CLR 1.1.4322)

Check your settings on Tools > Options > Advanced > Encryption; see: http://support.mozilla.com/en-US/kb/Options+window+-+Advanced+panel#Encryption_tab

Error ssl with tchatche app

I cannot use the app names "tchatche" because I have en error ssl.
an idea?

Well, you are only partially correct. You can have multiple wallets on the same port as long as they are on different IP addresses. This is how I got around the issue. The need to have a way to bind a wallet to a site name like you can do in Apache. I have 5 different sites going threw a single webcache instance with 5 different wallets. I needed to configure 5 different IP addresses on the server though. I found this post because I was hoping that with 10g there was a way to bing the wallet to the site.

Help on FRM-41211 Integration error: SSL failure running another product.

Am getting the above error, whenever I run my interface form calling a Report module.
What's baffling though is - this only happens during the initial call to the RUN_PRODUCT built-in. That is, after acknowledging the Form error, the Reports Background Engine is displayed, then everything would seem to be work after that.
Could this be a bug or is there a run-around to this?
Thanks a lot for your ideas and help.

We were getting this error on windows98 machines if someone had opened wordpad or some other unrelated application before running a report after they booted the machine. We solved the problem by forcing the reports backgroup engine to run at startup to prevent this error.
HOST (
'start /m RWRBE60.exe ',
no_screen); -- START BACKGROUND ENGINE TO PREVENT SSL INTEGRATION ERROR

SharePoint InfoPath error SSL/TLS extern list

Hello !
I want to modify my Element display on my extern List (BDC SQL Server) with infopath but in SharePoint Designer when I click on edit the form with InfoPath I have this error message :
"Could not establish trust relationship for the SSL/TLS (secure channel)."
With the others SharePoint Lists I haven't this problem, I can modify and publish Infopath form...
Thanks for your help.
Nols.

Hi Nols,
The error might be caused by SharePoint does not trust root certificates when you are trying to access external list over SSL\TLS.
Here is the link for the similar issue:
http://www.c-sharpcorner.com/uploadfile/anavijai/could-not-establish-trust-relationship-for-the-ssltls-secure-channel/
If it does not work, please check in ULS log and find detail error message for further troubleshooting.
Regards,
Rebecca Tu
TechNet Community Support

Error "SSL: rc=-1 lib_not_found" when Indexing for some web repositories

Hi ,
i am getting for 2 repositories the error:
Returnvalue 16001 Message: SSL: rc=-1 lib_not_found
For other web respositories the search works fine. I configured the proxy system.
I have no SSL between Portal and TREX.
Any help is welcome.
Regards,
Kai

Hello Kai,
I had the same error but for some documents of a repository. I configured the alternative host property in KM configuation.
You can have a look at :
https://forums.sdn.sap.com/message.jspa?messageID=6760393.
Olivier

Error SSL

Similar Messages

Maybe you are looking for