Error starting application server -Please help (Urgent)

Hi
Please suggest how to get over the below error while running opmnctl startall command
[root@navisdb bin]# ./opmnctl startall
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=navisdb.igglobal.com:6200
0 of 1 processes started.
ias-instance id=express.navisdb.igglobal.com
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
OC4J/home/default_island
Error
--> Process (pid=27083)
time out while waiting for a managed process to start
Log:
/oracle/u01/app/OraHome_1/opmn/logs/OC4J~home~default_island~1
On Checking server.log at location /oracle/u01/app/OraHome_1/opmn/logs/OC4J~home~default_island~1 getting following error.
isdb.igglobal.com#12601
10/05/11 11:33:17 10.1.2.0.2 Started
10/05/11 11:33:18 Forced or abrupt (crash etc) server shutdown detected, starting recovery process...
10/05/11 11:33:18 Recovery completed, 0 connections committed and 0 rolled back...
10/05/11 11:33:18 10.1.2.0.2 Started
10/05/11 11:33:24 Published an event: C_192.168.4.161.121f1d.12871b0a9da.-8000#express.navisdb.igglobal.com#1724121101#D#home#default_island&navisdb.igglobal.com&HTTP:navisdb.igglobal.com#12501&RMI:navisdb.igglobal.com#12401&JMS:navisdb.igglobal.com#12601
Enviornmnet: Oracle application server 10g on Red hat linux

Similar Messages

Starting tomcat problem, please help urgent

I installed jwsdp on windowsXP . The log file gives this following error when i try to start tomcat:
java.util.zip.ZipException: Access is denied
     at java.util.zip.ZipFile.open(Native Method)
     at java.util.zip.ZipFile.<init>(ZipFile.java:127)
     at java.util.jar.JarFile.<init>(JarFile.java:138)
     at java.util.jar.JarFile.<init>(JarFile.java:80)
     at org.apache.catalina.loader.StandardClassLoader.addRepositoryInternal(StandardClassLoader.java:1081)
     at org.apache.catalina.loader.StandardClassLoader.<init>(StandardClassLoader.java:200)
     at org.apache.catalina.startup.ClassLoaderFactory.createClassLoader(ClassLoaderFactory.java:202)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:141)
     at java.lang.reflect.Method.invoke(Native Method)
     at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
Bootstrap: Class loader creation threw exception
java.lang.IllegalArgumentException: addRepositoryInternal: java.util.zip.ZipException: Access is denied
     at org.apache.catalina.loader.StandardClassLoader.addRepositoryInternal(StandardClassLoader.java:1109)
     at org.apache.catalina.loader.StandardClassLoader.<init>(StandardClassLoader.java:200)
     at org.apache.catalina.startup.ClassLoaderFactory.createClassLoader(ClassLoaderFactory.java:202)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:141)
     at java.lang.reflect.Method.invoke(Native Method)
     at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
PLEASE HELP ,URGENTLY NEEDED TO SHOW SOME WORK ON THIS.
THANKS
jim

Hi,
I have a similar problem, i try to deploy a JAR file built on AIX 5.2 platform (jvm 14.1) into Tomcat 5.5.7 running on Windows platform when i try start Tomcat it's fail with the fellowing message
SEVERE: Error deploying web application directory usi
java.lang.IllegalArgumentException
     at java.util.zip.ZipInputStream.getUTF8String(ZipInputStream.java:299)
     at java.util.zip.ZipInputStream.readLOC(ZipInputStream.java:238)
     at java.util.zip.ZipInputStream.getNextEntry(ZipInputStream.java:73)
     at java.util.jar.JarInputStream.<init>(JarInputStream.java:58)
     at java.util.jar.JarInputStream.<init>(JarInputStream.java:43)
     at org.apache.catalina.util.ExtensionValidator.getManifest(ExtensionValidator.java:368)
     at org.apache.catalina.util.ExtensionValidator.validateApplication(ExtensionValidator.java:187)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:3942)
     at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:759)
     at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:739)
     at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:524)
     at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:909)
     at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:872)
     at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:474)
     at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1106)
     at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:310)
     at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1019)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:718)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1011)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:440)
     at org.apache.catalina.core.StandardService.start(StandardService.java:450)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:683)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:537)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:271)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:409)

Error when starting j2ee server, please help

JMS expert,
I am using j2sdkee1.3 with jdk1.3.1_01 over NT system. When I started JMS provider by "j2ee -verbose", I got an exception saying "TCP/IP ports(1050) in use by another process". Then I tried other port numbers like 1051 and 1061, the same error kept coming. What is the best port number I should use or whatelse I should do to solve this problem? Thanks.
C:\j2sdkee1.3\jms_execise>c:\j2sdkee1.3\bin\j2ee -verbose
J2EE server listen port: 1081
org.omg.CORBA.INTERNAL: minor code: 1398079697 completed: No
at com.sun.corba.ee.internal.iiop.GIOPImpl.createListener(GIOPImpl.java:256)
at com.sun.corba.ee.internal.iiop.GIOPImpl.getEndpoint(GIOPImpl.java:205)
at com.sun.corba.ee.internal.iiop.GIOPImpl.initEndpoints(GIOPImpl.java:140)
at com.sun.corba.ee.internal.POA.POAORB.getServerEndpoint(POAORB.java:488)
at com.sun.corba.ee.internal.POA.POAImpl.pre_initialize(POAImpl.java:154)
at com.sun.corba.ee.internal.POA.POAImpl.<init>(POAImpl.java:112)
at com.sun.corba.ee.internal.POA.POAORB.makeRootPOA(POAORB.java:110)
at com.sun.corba.ee.internal.POA.POAORB$1.evaluate(POAORB.java:128)
at com.sun.corba.ee.internal.core.Future.evaluate(Future.java:21)
at com.sun.corba.ee.internal.corba.ORB.resolveInitialReference(ORB.java:2421)
at com.sun.corba.ee.internal.corba.ORB.resolve_initial_references(ORB.java:2356)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:193)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
java.lang.RuntimeException: Unable to create ORB. Possible causes include TCP/IP ports in use by another process
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:203)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
java.lang.RuntimeException: Unable to create ORB. Possible causes include TCP/IP ports in use by another process
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:203)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
java.lang.RuntimeException: Unable to create ORB. Possible causes include TCP/IP ports in use by another process
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:350)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
J2EE server reported the following error: Unable to create ORB. Possible causes include TCP/IP ports in use by another process
Error executing J2EE server ...
****************************************************************

Hello.,
Did you get a resolution to this error ? I get the same error, odd thing is that i had it working for several days and now it won;t start ?
JMS expert,
I am using j2sdkee1.3 with jdk1.3.1_01 over NT system.
When I started JMS provider by "j2ee -verbose", I got
an exception saying "TCP/IP ports(1050) in use by
another process". Then I tried other port numbers like
1051 and 1061, the same error kept coming. What is
the best port number I should use or whatelse I should
do to solve this problem? Thanks.
C:\j2sdkee1.3\jms_execise>c:\j2sdkee1.3\bin\j2ee
-verbose
J2EE server listen port: 1081
org.omg.CORBA.INTERNAL: minor code: 1398079697
completed: No
at
at
at
t
com.sun.corba.ee.internal.iiop.GIOPImpl.createListener(
IOPImpl.java:256)
at
at
at
t
com.sun.corba.ee.internal.iiop.GIOPImpl.getEndpoint(GIO
Impl.java:205)
at
at
at
t
com.sun.corba.ee.internal.iiop.GIOPImpl.initEndpoints(G
OPImpl.java:140)
at
at
at
t
com.sun.corba.ee.internal.POA.POAORB.getServerEndpoint(
OAORB.java:488)
at
at
at
t
com.sun.corba.ee.internal.POA.POAImpl.pre_initialize(PO
Impl.java:154)
at
at
at
t
com.sun.corba.ee.internal.POA.POAImpl.<init>(POAImpl.ja
a:112)
at
at
at
t
com.sun.corba.ee.internal.POA.POAORB.makeRootPOA(POAORB
java:110)
at
at
at
t
com.sun.corba.ee.internal.POA.POAORB$1.evaluate(POAORB.
ava:128)
at
at
at
t
com.sun.corba.ee.internal.core.Future.evaluate(Future.j
va:21)
at
at
at
t
com.sun.corba.ee.internal.corba.ORB.resolveInitialRefer
nce(ORB.java:2421)
at
at
at
t
com.sun.corba.ee.internal.corba.ORB.resolve_initial_ref
rences(ORB.java:2356)
at
at
at
t
com.sun.enterprise.server.J2EEServer.run(J2EEServer.jav
:193)
at
at
at
t
com.sun.enterprise.server.J2EEServer.main(J2EEServer.ja
a:913)
java.lang.RuntimeException: Unable to create ORB.
Possible causes include TCP/IP ports in use by another
process
at
at
at
t
com.sun.enterprise.server.J2EEServer.run(J2EEServer.jav
:203)
at
at
at
t
com.sun.enterprise.server.J2EEServer.main(J2EEServer.ja
a:913)
java.lang.RuntimeException: Unable to create ORB.
Possible causes include TCP/IP ports in use by another
process
at
at
at
t
com.sun.enterprise.server.J2EEServer.run(J2EEServer.jav
:203)
at
at
at
t
com.sun.enterprise.server.J2EEServer.main(J2EEServer.ja
a:913)
java.lang.RuntimeException: Unable to create ORB.
Possible causes include TCP/IP ports in use by another
process
at
at
at
t
com.sun.enterprise.server.J2EEServer.run(J2EEServer.jav
:350)
at
at
at
t
com.sun.enterprise.server.J2EEServer.main(J2EEServer.ja
a:913)
J2EE server reported the following error: Unable to
create ORB. Possible causes include TCP/IP ports in
use by another process
Error executing J2EE server ...

Problem in starting RMI server, please help!

Hi , all:
I am learning RMI from SUN's tutorial. I set all of program packages as same as the tutorial, compiled all of programs . and built all of the jar files, the server classes and the client classes.When I run the server, ComputeEngine, it did not work ,and the following messages were showed at command lines:
C:\RMI\doc>java -Djava.rmi.server.codebase=file:/c:\rmi\ann\public_html\classes/
-Djava.rmi.server.hostname=localhost -Djava.security.policy=java.policy eng
ine.ComputeEngine
ComputeEngine exception: access denied (java.net.SocketPermission 127.0.0.1:1099
connect,resolve)
java.security.AccessControlException: access denied (java.net.SocketPermission 1
27.0.0.1:1099 connect,resolve)
at java.security.AccessControlContext.checkPermission(AccessControlConte
xt.java:272)
at java.security.AccessController.checkPermission(AccessController.java:
399)
at java.lang.SecurityManager.checkPermission(SecurityManager.java:545)
at java.lang.SecurityManager.checkConnect(SecurityManager.java:1044)
at java.net.Socket.<init>(Socket.java:262)
at java.net.Socket.<init>(Socket.java:100)
at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirect
SocketFactory.java:25)
at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMaster
SocketFactory.java:120)
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:499)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:190
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:174)
at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:318)
at sun.rmi.registry.RegistryImpl_Stub.rebind(Unknown Source)
at java.rmi.Naming.rebind(Naming.java:160)
at engine.ComputeEngine.main(ComputeEngine.java:25)
Please give helps .
Thanks!

Thank.
Thank.
I have put them at the same directory, but is deos not work.
Something I am not sure.
On the SUN's tutorial , the follows is given:
Win32:
java -Djava.rmi.server.codebase=file:/c:\home\ann\public_html\classes/
-Djava.rmi.server.hostname=zaphod.east.sun.com
-Djava.security.policy=java.policy
engine.ComputeEngine
I changed hostname = localhost
I also changed the code of the server class given by tutorial :
String name = "//host/Compute" ;
to:
String name = "//localhost/Compute";
Should I make such changes?
Here is the server class given by the tutorial:
package engine;
import java.rmi.*;
import java.rmi.server.*;
import compute.*;
public class ComputeEngine extends UnicastRemoteObject
implements Compute
public ComputeEngine() throws RemoteException {
super();
public Object executeTask(Task t) {
return t.execute();
public static void main(String[] args) {
if (System.getSecurityManager() == null) {
System.setSecurityManager(new RMISecurityManager());
String name = "//host/Compute";
try {
Compute engine = new ComputeEngine();
Naming.rebind(name, engine);
System.out.println("ComputeEngine bound");
} catch (Exception e) {
System.err.println("ComputeEngine exception: " +
e.getMessage());
e.printStackTrace();

Frozen on Start Up Screen - Please Help (Urgent)

I've had my mac Mini for a little over a year now and have not once had a problem with it. When I came home from work yesterday there had been a powercut and naturally my mac mini had switched off. When i tried to turn it back on it made the chime and went into the start up screen (with the mac logo and the little spinning thing) i was waiting half an hour for it to get off this screen but it did not. When i restarteed the computer i had the same problem, i left it on over night to see if it was just going to take time to load but by this morning nothing had changed (same loading screen on moniter).
I Have tried to reset the PMU (or whatever its called) and i still have the same probelm.
Help desperatly needed as the computer has two years worth of school work and writing on it not to mention music and movies than ive made for my uni course!
Many thanks in advance
Henry

OK, so it looks like when the mini crashed, it ended up corrupting the drive directory structure - possibly it was in the middle of a write operation when the power failed.
The good news is that rarely does this cause a hardware fault, so there is like as not, nothing wrong with the system that can't be fixed.
However, the bad news is that without a disk recovery utility, such as DiskWarrior or Tech Tools Pro, neither of which are absolutely certain to work) the only way to get the system back under normal control is to reformat the drive, since this will rewrite the directory structure. And of course reformatting will loose your data. In this situation, simply trying to reinstall MacOS won't work since the system has errors on the drive that will prevent data being safely written. Also, any and all disk write activity risks overwriting your data since the faults generally will indicate that MacOS won't know for sure where your data is, thus make it possible to write over the top of it.
Since iTunes won't allow you to download again, and it appears you don't have any backups, I think you have few options to consider:
1 - buy a copy of DiskWarrior or Tech Tools Pro and try and recover the drive that way. The disadvantages are that this will cost you some money, and there's no certainty it will work, but if it does, the advantage is that you could restore your drive (and thus system) to full operational status with little effort.
2 - get hold of (meaning buy or borrow from someone else) an external firewire drive onto which you can install a copy of MacOS with which to boot your system. Once booted, then use the drive to copy off your files, then once backed up, do an Erase and Install using your original install disk to reformat the hard drive and put back a working copy of MacOS. Once done, you can then copy your files back from the external hard drive.
3 - if you have another Mac available to you, connect your mini to it with a firewire cable and start it up holding the T key to put it into firewire target disk mode. It should then appear on the other Mac's desktop as an external drive and thus allow you to access your files and back them up.
Beware however that if the directory structure on the mini's hard drive is messed up, there is no certainty that you can recover all your data since the data may not be entirely intact, or indeed, in the locations the directory structure tells the system it is in. As a result, the best option from the 3 above is the first - to try and repair the directory using one of those two utilities.

Wlserver.exe error occur while start the web logic server-please help

hi
Iam getting wlserver.exe error when I start the web logic server-please help. and I cant able to start the web logic server.
Thannks in Advance,
Cheers,
bala...

Could you please mail the errors and the WLS Version and service pack as well.
- Ramkumar

I'm trying to set up my new iPhone 5s from a backup of my previous iPhone, when trying to enter my Facebook login info in settings I keep getting the following error message : error signing in could not communicate with server, please help !

I'm trying to set up my new iPhone 5s from a backup of my previous iPhone, when trying to enter my Facebook login info in settings I keep getting the following error message : error signing in could not communicate with server, please help !

Can you access other apps? Can you acess the internet? Can you access applications that use internet besides facebook?
If answer is yes to all of these; contact Facebook.

I have windows 8 and I got this error "Adobe Photoshop has stopped working" whenever I start a program. please help. how can I fix this problem? many thanks

i have windows 8 and I got this error "Adobe Photoshop has stopped working" whenever I start a program. please help. how can I fix this problem? many thanks

Please read these and proceed accordingly:
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325

TS3376 I was able to use the findmyiphone app last week, but now I have been getting an error message "Can't load findmyiphone. There was a problem loading the application." please help as we are trying to locate an ipod with pics of a no deceased loved

I was able to use the findmyiphone app last week, but now I have been getting an error message "Can't load findmyiphone. There was a problem loading the application." please help as we are trying to locate an ipod with pics of a no deceased loved one.

Had the same problem and the same message -- was suddenly unable to access icloud apps on my pc, also using Windows 7 and Internet Explorer. After several days of pulling my hair out, decided to try a different browser and was able to get in by using Firefox instead of Internet Explorer. Hope this helps.

Error Starting ORMI-Server

Hi
I am using 10g Enterprise Edition on Linux Advance Server 3.0 and Enterprise Manager.
I get the following error when starting up each Container I have created.
04/01/14 10:25:56 Error starting ORMI-Server. Unable to bind socket: Address already in use
04/01/14 10:25:59 java.lang.NullPointerException
04/01/14 10:25:59 at com.evermind.server.rmi.RMIServer.run(RMIServer.java:470)
04/01/14 10:25:59 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
04/01/14 10:25:59 at java.lang.Thread.run(Thread.java:534)
I changed the port number ranges via EM and in "opmn.xml" to limit each container to its own range, but no success.
Even i set the specific port for each service.
M. Tahir.

hi ramesh,
this is sateesh. I only posted the above request
before i found the solution. but with different
trials i got that at last.
--sateesh(TCS)Hi Sateesh,
i'm using the Oracle 10g AS (9.0.4) on RedHat Linux 3.0 Advanced Server.
I've formatted my machine, installed redhat and then 10g AS. There are no other softwares installed on my machine.
After installation, I've created an Instace of OC4J server using IAS console, started the instance and got a message saying my instance has been started. But when i look at the log file in %ORACLE_HOME%/opmn/logs i got a message saying "Error starting ORMI-Server. Unable to bind socket: Address already in use".
I've searched this forum for this and did all the kinds of modifications suggested by others and found no success. U said that u've tried other way and found the solution. Could you please help me out with the solution. I've tried stopping the default server instance being created at the time of 10 gAS installation. When i looked at the ports in use for the application server, its listing different ports for JMS, RMI and AJP but the same port for Oracle HTTP Server as 7778.
P.S.: this is not only for sateesh, but for any one who could help me out with the solution.
Please help me ASAP as its urgent for me and I've spent last 5 days for this.
Any kind of help regarding this would be highly appreciated.
Thanks,
Balakrishna

OBIEE 11g- unable to start application server

Dear All,
I have recently installed OBIEE 11g 11.1.1.6.0 for the first time (enterprise install)
am able to login to anaytics page and create reports, but Iam not able to connect to enterprise manger , console.
Going through various posts, i came to know i should start Application server.
which i was not able to. was getting error as
'unable to get file lock will retry'.
I tried deleting
Navigate to the path : <OBIEE HOME>/C:\Middleware\user_projects\domains\bifoundation_domain\servers\AdminServer\tmp
“AdminServer.lok” file.
it still did not start
I try doing the same for “bi_server1″ lock file. but am not able to delete this file.
It says its in use. but i did not find any Java process running.
Can you please help. how can i start my Application server on windows OS.
Appreciate your help.
thanks in advance.
Achala

Firstly we have shutdown the application for OS activity for creating mount point(related to Business)
then we where trying to start the application all the work process are running with semaphore 50 , there no such error mesg ,just the work process are hang at running state with user SAPSYS
the i have shutdown the application and clean the ipc and again i restarted the app still the same issue
Hope u understand
Thank you
Haroon

Error starting HTTP-Server: Address in use: JVM_Bind

I installed J2ee version of Oracle9iAS R2 for windows. When I start my application server, I always get the error "Error starting HTTP-Server: Address in use: JVM_Bind". In the previous version, if I met this message, I can change the port number in "http-web-site.xml", but now, no matter what port number I changed, I always get this error message.
Could anybody please help me with this issue?
Can Oracle provides a tool that can automatically free the port?
Thanks, Jessie

If you are getting this error while starting the Oracle9iAS by using the NT services or using command line (dcmctl) then there is a port conflict for the HTTP Server. You can go the EM Website and select HTTP Server ->Server properties and select the port# for the HTTP Server.
OC4J is configured to listen for AJP requests only and the ports are dynamically assigned. The port ranges can be specified : OC4J Instance -> Server Properties
regards
Debu Panda
Oracle

Please Help - Urgent

Hi everyone, I�m having problems with Java Mail, I have just installed it along with the java activation framework, they are located in the following directories:
JavaMail: C:\jdk1.3.1\lib\javamail-1_2[1]
Java activation framework: C:\jdk1.3.1\lib\jaf1_0_1[1]
I have the classpath set as: C:\jdk1.3.1\lib\mail.jar;C:\jdk1.3.1\lib\activation.jar
When I try to compile the sample code provided with these packages, msgsend.java using Jbuilder 2 I get the following errors:
Error (36): cannot access directory javax\mail.
Error (37): cannot access directory javax\mail\internet.
Error (209): class message not found in class msgsend.
Error (210): class MessagingException not found in class msgsend
Error (134): class Session not found in class msgsend
Error (134): variable Session not found in class msgsend
Error (139): class Message not found in class msgsend
Error (139): class MimeMessage not found in class msgsend
Error (141): class InternetAddress not found in class msgsend
Error (145): cannot access class Message.RecipientType;neither class nor source found for Message.RecipientType.
Error (146): Variable InternetAddress not found in class msgsend
Error (148): cannot access class Message.RecipientType;neither class nor source found for Message.RecipientType.
Error (149): Variable InternetAddress not found in class msgsend
Error (151): cannot access class Message.RecipientType;neither class nor source found for Message.RecipientType.
Error (152): Variable InternetAddress not found in class msgsend
Error (162): Variable Transport not found in class msgsend
Error (170): class Store not found in class msgsend
Error (172): class URLName not found in class msgsend
Error (172): class URLName not found in class msgsend
Error (189): class Folder not found in class msgsend
Error (195): Variable Folder not found in class msgsend
Error (197): class Message not found in class msgsend
Error (197): class Message not found in class msgsend
If I try to use another Java package to compile it I get even more errors (52), I cannot compile it by using the Javac command line compiler, it just says �Bad command or file name�.
Can anyone tell me Why this is happening and how I might be able to fix it please, I need to start learning Java Mail quickly but at the moment I can�t even begin to do this until I can understand how to get this sample code to work.
Thanks Everyone
Noel

First of all... don't post with topics like "Please Help - Urgent". The topic is supposed to reflect what the question is about.
Secondly... think for a second. If mail.jar is in C:\jdk1.3.1\lib\javamail-1_2[1]... why are you with your classpath saying that mail.jar is in C:\jdk1.3.1\lib ?
You classpath is supposed to point directly at you jar-files.
/Michael

Error starting ORMI server, when run oc4j.cmd -start

hello oracle guru,
i just finish installing the Oracle Business Intelligence Publisher Standalone 10.1.3.4 in Window XP Home Edition SP3 platform..
but when i want to start the BI Publisher, by running the oc4j, i get this errors
Starting OC4J from E:\OraInstall\OraBIP\oc4j_bi\j2ee\home ...
2010-10-13 17:33:17.453 ERROR ServerFile[PersistentMap,/E:/OraInstall/OraBIP/oc4j_bi/j2ee/home/persistence/jms.state]:persistence file could not be locked. Resolve the sharing violation by ending the process currently holding the file lock or by using a different persistence directory for one or both processes.
10/10/13 17:33:17 *** (SEVERE) ServerFile[PersistentMap,/E:/OraInstall/OraBIP/oc4j_bi/j2ee/home/persistence/jms.state]: persistence file could not be locked. Resolve the sharing violation by ending the process currently holding the file lock or by using a different persistence directory for one or both processes.
2010-10-13 17:33:17.484 ERROR Failed to set the internal configuration of the OC4J JMS Server with: XMLJMSServerConfig[file:/E:/OraInstall/OraBIP/oc4j_bi/j2ee/home/config/jms.xml]
10/10/13 17:33:17 *** (SEVERE) Failed to set the internal configuration of the OC4J JMS Server with: XMLJMSServerConfig[file:/E:/OraInstall/OraBIP/oc4j_bi/j2ee/home/config/jms.xml]
2010-10-13 17:33:17.484 ERROR J2EE OJR-00011 Exception starting JMS server: Failed to set the internal configuration of the OC4J JMS Server with:XMLJMSServerConfig[file:/E:/OraInstall/OraBIP/oc4j_bi/j2ee/home/config/jms.xml]
2010-10-13 17:33:17.593 ERROR J2EE RMI-00002 Error starting ORMI server TOSHIBA port 23,791:Address already in use: JVM_Bind
2010-10-13 17:33:17.609 ERROR java.net.BindException: Address already in use: JVM_Bind
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:359)
at java.net.ServerSocket.bind(ServerSocket.java:319)
at java.net.ServerSocket.<init>(ServerSocket.java:185)
at com.evermind.server.rmi.RMIServer.createServerSocket(RMIServer.java:433)
at com.evermind.server.rmi.RMIServer.createNonSecureSocket(RMIServer.java:347)
at com.evermind.server.rmi.RMIServer.setConfig(RMIServer.java:210)
at com.evermind.server.ApplicationServer.initializeRMI(ApplicationServer.java:2378)
at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:966)
at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
at java.lang.Thread.run(Thread.java:595)
10/10/13 17:33:17 Error starting ORMI server TOSHIBA port 23,791: Address already in use: JVM_Bind
10/10/13 17:33:17 Shutting down OC4J...
Can somebody who have been facing this error before this can guide me on how to solve the problem?

http://kr.forums.oracle.com/forums/thread.jspa?threadID=640696
Please check this link... it helped me in Solaris environment..it works for me.
All the best..
Thanks
Deependra

Error starting ORMI-Server. Uable to bind socket

Hi,
I get the following error whenever I start my Application Server on Linux machine.
If I deploy the EJB application onto a OC4J instance, the server is refusing the connection by throwing Connection Refused error.
Any insight about this issue will be helpful.
Thanks,
Mohan
04/07/08 17:14:42 Error starting ORMI-Server. Unable to bind socket: Address already in use
04/07/08 17:14:44 Oracle Application Server Containers for J2EE 10g (9.0.4.0.0) initialized
04/07/08 17:14:44 java.lang.NullPointerException
04/07/08 17:14:44 at com.evermind.server.rmi.RMIServer.run(RMIServer.java:470)
04/07/08 17:14:44 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Releasabl
eResourcePooledExecutor.java:186)
04/07/08 17:14:44 at java.lang.Thread.run(Thread.java:534)

Hi Avi,
of course you are right that the standalone OC4J ist not the same as an OC4J instance within the Oracle Application Server though from my point of view many J2EE-Server related questions or problems regarding the EJB- and or WEB-container could be answered/handled same or equally.
That's why I'm a little bit irritated by your statement. From a forum user's perspective I'd hate it to follow eg all those Forms and Reports service discussions if I were a Java Developer or Deployer. So I would like to see all posts regarding the OC4J-Container here (no matter if standalone or inside OAS). Nevertheless everybody should clearly indicate the exact product version including the distinction beetween standalone and OAS.
Just my 0.2 about this. What do others think?
Avi, if you really want all discussion about OAS including OC4J topics to happen within the "Application Server - General" forum, I'd suggest you add a forum description which makes that clear.
Well, if one can persuade you to not follow such a strict separation as I argued against, it could be still beneficial to add a meaningful forum description (eg. to remind people of the distinction between standalone OC4J and OAS.
Thoughts?
Regards,
Eric

Error starting application server -Please help (Urgent)

Similar Messages

Maybe you are looking for