Error starting managment server from command line
I tried to start the managment server from the command line like this:
<jvm_home>/bin/jrcmd <pid start_management_server
and I'm getting the following error:
<pid> Not enough storage is available to run this command
The system has plenty or resources. I'm unsure what storate the command refers too.
The pid was found by using tasklist /svc at the command line to find the pid matching the domain service name.
this is jrockit 1.42_13
What operating system are you on? What is the complete version of JRockit ("java -version" will tell)?
Regards,
/Staffan
Similar Messages
-
Error start managed server from admin console in SSL mode
I have configured Admin server, managed servers and node manager on the same physical server and commonly using a single SSL sertificate.
There is no problem to start node manager, admin server and managed server individually. But if I try to start managed server from the admin console then I am getting the following errors.
<Feb 22, 2005 11:02:26 AM CST> <Info> <[email protected]:6666> <Starting Server peoplesoft::PIA1 ...>
<Feb 22, 2005 11:02:26 AM CST> <Info> <NodeManager@xxxxxxxxxx:6666> <BaseProcessControl: saving process id of Weblogic Managed server 'PIA1', pid: 285390>
<Feb 22, 2005 11:02:35 AM CST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Classic VM Version 1.4.1 from IBM Corporation>
<Feb 22, 2005 11:02:36 AM CST> <Info> <Management> <BEA-141140> <The managed server is going to contact the admin server at http://xxxxxxxx:admin_server_portnumber to check if there exists a running admin server at this URL.>
<Feb 22, 2005 11:02:36 AM CST> <Info> <Configuration Management> <BEA-150017> <This server is being started as a dependent managed server.>
<Feb 22, 2005 11:02:36 AM CST> <Info> <Management> <BEA-141107> <Version: WebLogic Temporary Patch 8 CR174605 for PeopleSoft 09/09/2004 18:11:35
WebLogic Server 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284
WebLogic XMLX Module 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284 >
<Feb 22, 2005 11:02:37 AM CST> <Info> <Configuration Management> <BEA-150015> <Connecting to the administration server http://xxxxxxxxx.org:Admin_server_portnumber to retrieve the initial configuration.>
<Feb 22, 2005 11:02:45 AM CST> <Notice> <Log Management> <BEA-170019> <The server log file /home/xxxx/webserv/peoplesoft/PIA1/PIA1.log is opened. All server side log events will be written to this file.>
<Feb 22, 2005 11:03:01 AM CST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Feb 22, 2005 11:03:01 AM CST> <Warning> <Security> <BEA-090066> <Problem handling boot identity. The following exception was generated: java.lang.NullPointerException>
<Feb 22, 2005 11:03:10 AM CST> <Critical> <Security> <BEA-090174> <The trust keystore configuration specified on the command line or in boot.properties does not match the trust keystore configuration specified in config.xml.>
<Feb 22, 2005 11:03:10 AM CST> <Warning> <NodeManager> <BEA-300038> <The node manager is unable to monitor this server. Could not create an SSL connection to the node manager. Reason : null>
<Feb 22, 2005 11:03:10 AM CST> <Emergency> <WebLogicServer> <BEA-000342> <Unable to initialize the server: weblogic.management.configuration.ConfigurationException: Due to faulty SSL configuration, this server is unable to establish a connection to the node manager.>
The WebLogic Server did not start up properly.
Exception raised: 'weblogic.management.configuration.ConfigurationException: Due to faulty SSL configuration, this server is unable to establish a connection to the node manager.'
Reason: weblogic.management.configuration.ConfigurationException: Due to faulty SSL configuration, this server is unable to establish a connection to the node manager.
I am running everything on IBM UNIX server.
I appriciate your help.
Thanks & regards,
Laxman.Hi
From the admin console ... Are you able to check the status of Node Manager ?
If yes ... please check the SSL configuration of managed servers ...
Check the domain administration port also.
Jin -
Not able to start managed server from command prompt
Hi,
I am trying to start manged server from command prompt. The command i am using is as follows:
startManagedWebLogic.cmd MS1 [http://]<Listen_Address>:<Admin_port>
Where MS1 is the name of my managed server.
But i am getting following exceptions:
There are 1 nested errors:
weblogic.management.ManagementException: Unable to obtain lock on C:\bea\user_pr
ojects\domains\PB530Domain\servers\AdminServer\tmp\AdminServer.lok. Server may a
lready be running
at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.ja
va:159)
at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.ja
va:58)
at weblogic.management.internal.DomainDirectoryService.start(DomainDirec
toryService.java:73)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesMan
ager.java:459)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServ
icesManager.java:164)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:711)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:482)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:440)
at weblogic.Server.main(Server.java:67)
>
<Feb 10, 2009 6:48:16 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to FAILED>
<Feb 10, 2009 6:48:16 PM IST> <Error> <WebLogicServer> <BEA-000383> <A critical
service failed. The server will shut itself down>
<Feb 10, 2009 6:48:16 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to FORCE_SHUTTING_DOWN>
Please help me to resolve this issue.
thanks,
Sonal
Edited by: [email protected] on Feb 10, 2009 5:16 AMLooking at your error message a little closer, I don't believe it has anything to do with port conflicts but rather that even though you are executing the startManagedWeblogic.cmd with your managed server name (MS1), the error indicates that it is trying to start the Admin Server (not MS1). Note in your error message the following: Unable to obtain lock on C:\bea\user_pr
ojects\domains\PB530Domain\servers\AdminServer\tmp\AdminServer.lok. Server may a
lready be running
It is saying that it cannot start the Admin Server because it is already running (which is probably true in your case). Have you made any changes to the startManagedWeblogic.cmd or the startWeblogic.cmd scripts? I would start debugging there and try to figure out why the script is trying to start your admin server instead of MS1 as you requested on the cmd line. -
Error: starting remote managed server from command line
I have enabled SSL on the admin server, and configured/added the managed server
via my admin server console. However, when I attempt to start the managed server
via cmd line (script) on the remote machine, I get the following message:
Starting WebLogic Server ....
Connecting to http://adminservermachine:7001...
<Nov 18, 2002 11:42:28 AM EST> <Emergency> <Configuration Management>
<Errors detected attempting to connect to admin server at wk-gferguson:7001 during
initialization of managed server ( null:7001 ). The reported error was: < weblogic.security.acl.DefaultUserInfoImpl
Start server side stack trace:
java.lang.ClassCastException: weblogic.security.acl.DefaultUserInfoImpl
at weblogic.kernel.BootServicesImpl.authenticate(BootServicesImpl.java:189)
at weblogic.kernel.BootServicesImpl.invoke(BootServicesImpl.java:145)
at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:620)
at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:581)
at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:164)
at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:640)
at weblogic.rjvm.t3.T3JVMConnection.dispatch(T3JVMConnection.java:454)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:643)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
> This condition generally results when the managed and admin servers are using
the same listen address and port.>
<Nov 18, 2002 11:42:28 AM EST> <Emergency> <Server> <Unable to initialize the
se
rver: 'Fatal initialization exception
Throwable: weblogic.management.configuration.ConfigurationException: weblogic.se
curity.acl.DefaultUserInfoImplThis particular log entry looks like your problem:
<Jan 8, 2010 11:33:30 PM PST> <Error> <Server> <BEA-002606> <Unable to create a server socket for listening on channel "Default". The address 10.249.22.43 might be incorrect or another process is using port 20014: java.net.BindException: Cannot assign requested address.>
Check using netstat to see if that port is already in use.
Shared libraries don't need to be on the classpath, they are deployed similar to applications, so I'm confused by your comment about putting them on the classpath. I assume you're using Node Manager to start the server from the AdminConsole, if you want to use a difference classpath either use the StartupScriptEnabled=true in nodemanager.properties OR put the extra classpath entries on the Server Start tab in the console. -
Stopping, Refreshing deployments, Re-starting managed server from cmd line
I'm trying to put together an automatic redeployment batch script that will basically stop my managed weblogic 9 server, delete the deployed on the file system, move new ones in there (with the same names and structure), tell weblogic to refresh and pickup the changes, and restart it.
Does anyone have a script that can do this or something similar?Jared Blitz <> wrote:
I'm trying to put together an automatic redeployment batch script that
will basically stop my managed weblogic 9 server, delete the deployed on
the file system, move new ones in there (with the same names and
structure), tell weblogic to refresh and pickup the changes, and restart
it.
Does anyone have a script that can do this or something similar?Which operating system?
Bart
Schelstraete Bart
[email protected]
http://www.schelstraete.org -
Error when trying to start managed server from node manager
I have a managed server which is authenticated through a WeblogicAuthenticProvider. When starting the managed server from command line I need to setup certain jars in the classpath in order to start it successfully. However when I try and start the managed server from a node manager, I receive the following error.
Any ideas as to what is going on are appreciated. Is there any way to force Weblogic Node manager to invoke the actual startManagedWeblogic.cmd when bringing up the managed server
Thanks
<Jun 5, 2006 9:21:05 AM EDT> <Info> <NodeManager@*.*:5555> <Starting Server TweCluster::TaxwareServer1 ...>
<Jun 5, 2006 9:21:07 AM EDT> <Info> <NodeManager@*.*:5555> <Server TweCluster::TaxwareServer1 started, process id = 3,012>
<Jun 5, 2006 9:21:11 AM EDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA WebLogic JRockit(TM) 1.4.2_05 JVM R24.4.0-1 Version ari-38120-20041118-1131-win-ia32 from BEA Systems, Inc.>
<Jun 5, 2006 9:21:12 AM EDT> <Info> <Management> <BEA-141140> <The managed server is going to contact the admin server at http://zeus3dev:7001 to check if there exists a running admin server at this URL.>
<Jun 5, 2006 9:21:12 AM EDT> <Info> <Configuration Management> <BEA-150017> <This server is being started as a dependent managed server.>
<Jun 5, 2006 9:21:12 AM EDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
WebLogic XMLX Module 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647 >
<Jun 5, 2006 9:21:12 AM EDT> <Info> <Configuration Management> <BEA-150015> <Connecting to the administration server http://zeus3dev:7001 to retrieve the initial configuration.>
<Jun 5, 2006 9:21:16 AM EDT> <Notice> <Log Management> <BEA-170019> <The server log file E:\bea8.1\weblogic81\common\nodemanager\TaxwareServer1\TaxwareServer1.log is opened. All server side log events will be written to this file.>
The WebLogic Server did not start up properly.
java.lang.NoClassDefFoundError: com/taxware/twe/util/crypto/CryptoUtil
at com.taxware.twe.auth.server.GenericPrincipalValidator.<init>()V(GenericPrincipalValidator.java:41)
at com.taxware.twe.auth.server.WeblogicPrincipalValidator.<init>()V(WeblogicPrincipalValidator.java:38)
at com.taxware.twe.auth.server.WeblogicAuthenticationProvider.getPrincipalValidator()Lweblogic.security.spi.PrincipalValidator;(WeblogicAuthenticationProvider.java:188)
at weblogic.security.service.PrincipalAuthenticator.initialize(Ljava.lang.String;[Lweblogic.management.security.ProviderMBean;)V(PrincipalAuthenticator.java:154)
at weblogic.security.service.PrincipalAuthenticator.<init>(Ljava.lang.String;[Lweblogic.management.security.ProviderMBean;)V(PrincipalAuthenticator.java:262)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doATN(Ljava.lang.String;Lweblogic.management.security.RealmMBean;)Lweblogic.security.service.PrincipalAuthenticator;(SecurityServiceManagerDelegateImpl.java:581)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealm(Lweblogic.management.security.RealmMBean;Ljava.util.HashMap;)V(SecurityServiceManagerDelegateImpl.java:420)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.loadRealm(Ljava.lang.String;)V(SecurityServiceManagerDelegateImpl.java:700)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealms()V(SecurityServiceManagerDelegateImpl.java:733)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(Lweblogic.security.acl.internal.AuthenticatedSubject;)V(SecurityServiceManagerDelegateImpl.java:876)
at weblogic.security.service.SecurityServiceManager.initialize(Lweblogic.security.acl.internal.AuthenticatedSubject;)V(SecurityServiceManager.java:734)
at weblogic.t3.srvr.T3Srvr.initializeHere()V(T3Srvr.java:822)
at weblogic.t3.srvr.T3Srvr.initialize()V(T3Srvr.java:670)
at weblogic.t3.srvr.T3Srvr.run([Ljava.lang.String;)I(T3Srvr.java:344)
at weblogic.Server.main([Ljava.lang.String;)V(Server.java:32)
Reason: com/taxware/twe/util/crypto/CryptoUtilFound a workaround:
Manually, add PATH (and probably the other environment variables also) to
${WLS_HOME}/common/bin/commEnv.sh. -
Boot permission error starting managed server using startManagedWebLogic
Hello
I have a clustered WLS environment and am having problems starting the managed server from the command line using startManagedWebLogic.cmd script. The managed server starts without any problems from the admin console. Using the startManagedWebLogic.cmd script and the same login as I use for admin console, I am getting the following error when I execute:
startManagedWebLogic MyServer http://localhost:7001
Error displayed is:
<09-Aug-2005 14:21:46 o'clock BST> <Critical> <Security> <BEA-090404> <User vgnadmin is no
t permitted to boot the server; The server policy may have changed in such a way that the
user is no longer able to boot the server.Reboot the server with the administrative user a
ccount or contact the system administrator to update the server policy definitions.>
The WebLogic Server did not start up properly.
Reason: weblogic.security.SecurityInitializationException: User vgnadmin is not permitted
to boot the server; The server policy may have changed in such a way that the user is no l
onger able to boot the server.Reboot the server with the administrative user account or co
ntact the system administrator to update the server policy definitions.
Has anyone come accross this problem before? What can I do to run the managed server from command line?
My environment details:
OS: Windows 2000 Server SP3
WebLogic Server 8.1 SP2 (clustered with a single node)
Thanks in advance for your help.I have the same issue. However I am using ALES (Weblogic Enterprise Security) with WLS SP3.
Mine could be an ALES specific issue. Let me know if you have any updates. -
Hi,
Not a problem, please post the KJS error logs for me to hunt the
exact reason for the error.
Thanks & Regards
Raj
Neel John wrote:
To run an application on iAS6sp1 on HP-Unix, while starting the kjs
from command line, it gives a GDS error and crashes. Subsequently,
after stopping all services and restarting iAS wouldnot come up.
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base! -
How to start managed server from admin server both running
I have an admin server on one machine and created a managed server on different
machine, I am not able to start managed server from either machine. When I used
the admin server machine to start the managed server remotely I got this message
Connecting to http://fkeita:7001...
<Jul 17, 2002 11:11:06 AM EDT> <Notice> <Security> <090082> <Security initializi
ng using realm myrealm.>
<Jul 17, 2002 11:11:06 AM EDT> <Notice> <WebLogicServer> <000328> <Starting WebL
ogic Managed Server "managedserver3" for domain "admindomain">
<Jul 17, 2002 11:11:28 AM EDT> <Emergency> <WebLogicServer> <000350> <Unable to
create a server socket on Channel Default for: BFINKELMAN/90.0.0.25, port: 8002.
java.net.BindException: Cannot assign requested address: JVM_Bind Perhaps the
a
ddress BFINKELMAN/90.0.0.25 is incorrect or another process is using port 8002.>
<Jul 17, 2002 11:11:29 AM EDT> <Emergency> <Security> <090085> <Server failed
to
bind to any port such that it is not reachable from the console.>
<Jul 17, 2002 11:11:29 AM EDT> <Emergency> <WebLogicServer> <000342> <Unable to
initialize the server: Fatal initialization exception>
When I tried to connect managed server from its machine to admin server (running
on separate machine ) I got this error
Starting WebLogic Server...
Connecting to http://fkeita:7001...
<Jul 17, 2002 11:15:18 AM EDT> <Notice> <Security> <090082> <Security initializi
ng using realm myrealm.>
<Jul 17, 2002 11:15:18 AM EDT> <Critical> <WebLogicServer> <000364> <Server fail
ed during initialization. Exception:java.lang.SecurityException: Authentication
for user system denied
java.lang.SecurityException: Authentication for user system denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:978)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
>
<Jul 17, 2002 11:15:18 AM EDT> <Emergency> <WebLogicServer> <000342> <Unable to
initialize the server: Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication for user system denied
java.lang.SecurityException: Authentication for user system denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:978)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.SecurityException: Authentication for user system denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:978)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
Reason: Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication for user system denied
java.lang.SecurityException: Authentication for user system denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:978)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
Thanks."fkeita" <[email protected]> wrote in message
news:[email protected]...
>
I have an admin server on one machine and created a managed server ondifferent
machine, I am not able to start managed server from either machine. When Iused
the admin server machine to start the managed server remotely I got thismessage
>
Connecting to http://fkeita:7001...
<Jul 17, 2002 11:11:06 AM EDT> <Notice> <Security> <090082> <Securityinitializi
ng using realm myrealm.>
<Jul 17, 2002 11:11:06 AM EDT> <Notice> <WebLogicServer> <000328><Starting WebL
ogic Managed Server "managedserver3" for domain "admindomain">
<Jul 17, 2002 11:11:28 AM EDT> <Emergency> <WebLogicServer> <000350><Unable to
create a server socket on Channel Default for: BFINKELMAN/90.0.0.25, port:8002.
java.net.BindException: Cannot assign requested address: JVM_Bind Perhapsthe
a
ddress BFINKELMAN/90.0.0.25 is incorrect or another process is using port8002.>
>
Try running netstat to see whether another process is actually running at
the given address/port.
Also check using ifconfig/ipconfig or directly checking /etc/hosts file of
the box to see whether the ips addreses are correct.
<Jul 17, 2002 11:11:29 AM EDT> <Emergency> <Security> <090085> <Serverfailed
to
bind to any port such that it is not reachable from the console.>
<Jul 17, 2002 11:11:29 AM EDT> <Emergency> <WebLogicServer> <000342><Unable to
initialize the server: Fatal initialization exception>
When I tried to connect managed server from its machine to admin server(running
on separate machine ) I got this error
Starting WebLogic Server...
Connecting to http://fkeita:7001...
<Jul 17, 2002 11:15:18 AM EDT> <Notice> <Security> <090082> <Securityinitializi
ng using realm myrealm.>
<Jul 17, 2002 11:15:18 AM EDT> <Critical> <WebLogicServer> <000364><Server fail
ed during initialization. Exception:java.lang.SecurityException:Authentication
for user system denied
java.lang.SecurityException: Authentication for user system denied
atweblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:978)
atweblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
>Seems to be some issue with security credentials.
Try running the manageed server directly (as sort of admin) by not passing
the admin server url and bringing it just like an admin server.
See if this works. If it works, then soemthing wrong in the way the admin
server is receiving the request/security credentials from managed server.
Also make sure both managed and admin servers are on the same patch/service
pack level.
-Sabha -
How to start managed server from admin server both running on separate machines
I have an admin server on one machine and created a managed server on different
machine, I am not able to start managed server from either machine. When I used
the admin server machine to start the managed server remotely I got this message
Connecting to http://fkeita:7001...
<Jul 17, 2002 11:11:06 AM EDT> <Notice> <Security> <090082> <Security initializi
ng using realm myrealm.>
<Jul 17, 2002 11:11:06 AM EDT> <Notice> <WebLogicServer> <000328> <Starting WebL
ogic Managed Server "managedserver3" for domain "admindomain">
<Jul 17, 2002 11:11:28 AM EDT> <Emergency> <WebLogicServer> <000350> <Unable to
create a server socket on Channel Default for: BFINKELMAN/90.0.0.25, port: 8002.
java.net.BindException: Cannot assign requested address: JVM_Bind Perhaps the
a
ddress BFINKELMAN/90.0.0.25 is incorrect or another process is using port 8002.>
<Jul 17, 2002 11:11:29 AM EDT> <Emergency> <Security> <090085> <Server failed
to
bind to any port such that it is not reachable from the console.>
<Jul 17, 2002 11:11:29 AM EDT> <Emergency> <WebLogicServer> <000342> <Unable to
initialize the server: Fatal initialization exception>
When I tried to connect managed server from its machine to admin server (running
on separate machine ) I got this error
Starting WebLogic Server...
Connecting to http://fkeita:7001...
<Jul 17, 2002 11:15:18 AM EDT> <Notice> <Security> <090082> <Security initializi
ng using realm myrealm.>
<Jul 17, 2002 11:15:18 AM EDT> <Critical> <WebLogicServer> <000364> <Server fail
ed during initialization. Exception:java.lang.SecurityException: Authentication
for user system denied
java.lang.SecurityException: Authentication for user system denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:978)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
>
<Jul 17, 2002 11:15:18 AM EDT> <Emergency> <WebLogicServer> <000342> <Unable to
initialize the server: Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication for user system denied
java.lang.SecurityException: Authentication for user system denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:978)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.SecurityException: Authentication for user system denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:978)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
Reason: Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication for user system denied
java.lang.SecurityException: Authentication for user system denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:978)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
Thanks.
I used startmanagedweblogic managedserver1 http://fkeita:7001 to try to start managed
server, but it did not work, and got error messages. Error messages are posted
on my first posting.
"pankaj" <[email protected]> wrote:
>Use the startManagedWeblogic.cmd / .sh script to start your
>Managed/Clustered servers
>
>
>"fkeita" <[email protected]> wrote in message
>news:[email protected]...
>>
>> I have an admin server on one machine and created a managed server
>on
>different
>> machine, I am not able to start managed server from either machine.
>When I
>used
>> the admin server machine to start the managed server remotely I got
>this
>message
>>
>> Connecting to http://fkeita:7001...
>> <Jul 17, 2002 11:11:06 AM EDT> <Notice> <Security> <090082> <Security
>initializi
>> ng using realm myrealm.>
>> <Jul 17, 2002 11:11:06 AM EDT> <Notice> <WebLogicServer> <000328>
><Starting WebL
>> ogic Managed Server "managedserver3" for domain "admindomain">
>> <Jul 17, 2002 11:11:28 AM EDT> <Emergency> <WebLogicServer> <000350>
><Unable to
>> create a server socket on Channel Default for: BFINKELMAN/90.0.0.25,
>port:
>8002.
>> java.net.BindException: Cannot assign requested address: JVM_Bind
>Perhaps
>the
>> a
>> ddress BFINKELMAN/90.0.0.25 is incorrect or another process is using
>port
>8002.>
>>
>> <Jul 17, 2002 11:11:29 AM EDT> <Emergency> <Security> <090085> <Server
>failed
>> to
>> bind to any port such that it is not reachable from the console.>
>> <Jul 17, 2002 11:11:29 AM EDT> <Emergency> <WebLogicServer> <000342>
><Unable to
>> initialize the server: Fatal initialization exception>
>>
>> When I tried to connect managed server from its machine to admin server
>(running
>> on separate machine ) I got this error
>>
>> Starting WebLogic Server...
>> Connecting to http://fkeita:7001...
>> <Jul 17, 2002 11:15:18 AM EDT> <Notice> <Security> <090082> <Security
>initializi
>> ng using realm myrealm.>
>> <Jul 17, 2002 11:15:18 AM EDT> <Critical> <WebLogicServer> <000364>
><Server fail
>> ed during initialization. Exception:java.lang.SecurityException:
>Authentication
>> for user system denied
>> java.lang.SecurityException: Authentication for user system denied
>> at
>weblogic.security.service.SecurityServiceManager.doBootAuthorization(
>> SecurityServiceManager.java:978)
>> at
>weblogic.security.service.SecurityServiceManager.initialize(SecurityS
>> erviceManager.java:1116)
>> at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
>> at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
>> at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
>> at weblogic.Server.main(Server.java:31)
>> >
>> <Jul 17, 2002 11:15:18 AM EDT> <Emergency> <WebLogicServer> <000342>
><Unable to
>> initialize the server: Fatal initialization exception
>> Throwable: java.lang.SecurityException: Authentication for user system
>denied
>> java.lang.SecurityException: Authentication for user system denied
>> at
>weblogic.security.service.SecurityServiceManager.doBootAuthorization(
>> SecurityServiceManager.java:978)
>> at
>weblogic.security.service.SecurityServiceManager.initialize(SecurityS
>> erviceManager.java:1116)
>> at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
>> at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
>> at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
>> at weblogic.Server.main(Server.java:31)
>> >
>>
>***************************************************************************
>> The WebLogic Server did not start up properly.
>> Exception raised:
>> java.lang.SecurityException: Authentication for user system denied
>> at
>weblogic.security.service.SecurityServiceManager.doBootAuthorization(
>> SecurityServiceManager.java:978)
>> at
>weblogic.security.service.SecurityServiceManager.initialize(SecurityS
>> erviceManager.java:1116)
>> at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
>> at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
>> at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
>> at weblogic.Server.main(Server.java:31)
>> Reason: Fatal initialization exception
>> Throwable: java.lang.SecurityException: Authentication for user system
>denied
>> java.lang.SecurityException: Authentication for user system denied
>> at
>weblogic.security.service.SecurityServiceManager.doBootAuthorization(
>> SecurityServiceManager.java:978)
>> at
>weblogic.security.service.SecurityServiceManager.initialize(SecurityS
>> erviceManager.java:1116)
>> at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
>> at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
>> at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
>> at weblogic.Server.main(Server.java:31)
>>
>> Thanks.
>
>
-
Facing error in starting managed server from nodemanager
Hi All,
I have installed WebLogic server 10.3.4 and installed OSB 11.1.1.4.0. I created domain with one admin server and one managed server for osb. When I started managed server with the startManagedWebLogic command it got started successfully but when I am trying tp start the managed server from nodemanager I am getting the following error
starting weblogic with Java version:
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
[ERROR] aborted
JRockit aborted: Unknown error (50)
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
Starting WLS with line:
D:\JDK\JROCKI~1.0\bin\java -jrockit -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms256m -Xmx512m -Dweblogic.Name=osb_server1 -Djava.security.policy=D:\ORACLE~1\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Dweblogic.system.BootIdentityFile=D:\Oracle_OSB\Middleware\user_projects\domains\osb_domain\servers\osb_server1\data\nodemanager\boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=false -Dweblogic.ReverseDNSAllowed=false -Xverify:none -da:org.apache.xmlbeans... -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole... -Dplatform.home=D:\ORACLE~1\MIDDLE~1\WLSERV~1.3 -Dwls.home=D:\ORACLE~1\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=D:\ORACLE~1\MIDDLE~1\WLSERV~1.3\server -Dcommon.components.home=D:\ORACLE~1\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=D:\ORACLE~1\MIDDLE~1\USER_P~1\domains\OSB_DO~1 -Djrockit.optfile=D:\ORACLE~1\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=D:\ORACLE~1\MIDDLE~1\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\servers\osb_server1 -Doracle.domain.config.dir=D:\ORACLE~1\MIDDLE~1\USER_P~1\domains\OSB_DO~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=D:\ORACLE~1\MIDDLE~1\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\carml -Digf.arisidstack.home=D:\ORACLE~1\MIDDLE~1\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=D:\ORACLE~1\MIDDLE~1\USER_P~1\domains\OSB_DO~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=D:\ORACLE~1\MIDDLE~1\USER_P~1\domains\OSB_DO~1\servers\osb_server1\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=D:\ORACLE~1\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,D:\ORACLE~1\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dem.oracle.home=D:\Oracle_OSB\Middleware\oracle_common -Djava.awt.headless=true -Dweblogic.management.discover=false -Dweblogic.management.server=http://soaspt-app01.scotwat.net:7010 -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=D:\ORACLE~1\MIDDLE~1\patch_wls1034\profiles\default\sysext_manifest_classpath;D:\ORACLE~1\MIDDLE~1\patch_ocp360\profiles\default\sysext_manifest_classpath weblogic.Server
[WARN ] Use of -Djrockit.optfile is deprecated and discouraged.
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
[ERROR] aborted
JRockit aborted: Unknown error (50)
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
<11-Mar-2013 13:22:17> <FINEST> <NodeManager> <Waiting for the process to die: 5916>
<11-Mar-2013 13:22:17> <INFO> <NodeManager> <Server failed during startup so will not be restarted>
<11-Mar-2013 13:22:17> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
My nodemanager is started and reachable. The error above says "Address already in use" but I am able to start my managed server through startManagedWebLogic.cmd command.
Can anyone please tell me what could be the issue. It is really urgent. Please help!!Hi Roshni,
It is likely that a configuration is missing or not set properly in the Node Manager properties file (nodemanager.properties) since the managed server can be started up using startManagedWebLogic.cmd but not with Node Manager. I would complete the following steps to fix the problem:
1. Go to %WLS_HOME%\common\nodemanager and open up nodemanager.properties (Make a backup of the file first). NOTE: WLS_HOME is your WebLogic Server home.
2. Look for the parameters "StartScriptEnabled" and "StopScriptEnabled". They should be set to true. If not, please set them to true.
3. Save and close the file.
4. Restart the Node Manager
If you are still unable to start the manager server using Node Manager, you may need to update the DEBUG_PORT parameter in setDomainEnv.cmd located in %MIDDLEWARE_HOME%\user_projects\domains\%DOMAIN_HOME%\bin (always make a backup before changing a configuration file). You may refer to Oracle Support note 1272642.1 for more information about the nodemanager.properties file and how to configure the DEBUG_PORT parameter in setDomainEnv.cmd if needed.
Thanks,
Scott (PITSS)
http://pitss.com/us -
Error starting managed server through admin console
Hey,
I am trying to start the managed server through the admin console, but it gives fails and give errors in the log, below mention is the log file details:
####<2007-dec-18 kl 14:05 CET> <Error> <Security> <SESO-ODX251909> <ManagedServer_1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1197983149062> <BEA-090870> <The realm "myrealm" failed to be loaded: weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: [Security:090730]Failed to verify credential mapper LDAP hierarchy
netscape.ldap.LDAPException: Server or network error (81)
at netscape.ldap.LDAPConnThread.networkError(LDAPConnThread.java:768)
at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:555)
at java.lang.Thread.run(Thread.java:595)
weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: [Security:090730]Failed to verify credential mapper LDAP hierarchy
netscape.ldap.LDAPException: Server or network error (81)
at netscape.ldap.LDAPConnThread.networkError(LDAPConnThread.java:768)
at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:555)
at java.lang.Thread.run(Thread.java:595)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:469)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:822)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:851)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1007)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:854)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: [Security:090730]Failed to verify credential mapper LDAP hierarchy
netscape.ldap.LDAPException: Server or network error (81)
at netscape.ldap.LDAPConnThread.networkError(LDAPConnThread.java:768)
at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:555)
at java.lang.Thread.run(Thread.java:595)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:342)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:292)
at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:263)
at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:71)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:461)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:822)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:851)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1007)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:854)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
weblogic.security.spi.ProviderInitializationException: [Security:090730]Failed to verify credential mapper LDAP hierarchy
netscape.ldap.LDAPException: Server or network error (81)
at netscape.ldap.LDAPConnThread.networkError(LDAPConnThread.java:768)
at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:555)
at java.lang.Thread.run(Thread.java:595)
at weblogic.security.providers.credentials.DefaultCredentialMapperLDAPHelper.getInstance(DefaultCredentialMapperLDAPHelper.java:115)
at weblogic.security.providers.credentials.DefaultCredentialMapperProviderImpl.initialize(DefaultCredentialMapperProviderImpl.java:93)
at com.bea.common.security.internal.legacy.service.SecurityProviderImpl.init(SecurityProviderImpl.java:53)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:340)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:292)
at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:263)
at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:71)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:461)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:822)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:851)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1007)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:854)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
>
####<2007-dec-18 kl 14:05 CET> <Critical> <WebLogicServer> <SESO-ODX251909> <ManagedServer_1> <Main Thread> <<WLS Kernel>> <> <> <1197983149109> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.security.service.SecurityServiceRuntimeException: [Security:090399]Security Services Unavailable
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:898)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1029)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:854)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
I am using weblogic server 9.2 on windows. Node manager is working fine. i have tried installing weblogic server several times but it gives the same error each time i start a managed server. Kindly help.
Regards,
AlkaCan you start a managed server from the command line?
<Alka Parveen> wrote in message news:[email protected]...
Hey,
I am trying to start the managed server through the admin console, but it
gives fails and give errors in the log, below mention is the log file
details:
####<2007-dec-18 kl 14:05 CET> <Error> <Security> <SESO-ODX251909>
<ManagedServer_1> <[ACTIVE] ExecuteThread: '0' for queue:
'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <>
<1197983149062> <BEA-090870> <The realm "myrealm" failed to be loaded:
weblogic.security.service.SecurityServiceException:
com.bea.common.engine.ServiceInitializationException:
weblogic.security.spi.ProviderInitializationException:
[Security:090730]Failed to verify credential mapper LDAP hierarchy
netscape.ldap.LDAPException: Server or network error (81)
at netscape.ldap.LDAPConnThread.networkError(LDAPConnThread.java:768)
at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:555)
at java.lang.Thread.run(Thread.java:595)
weblogic.security.service.SecurityServiceException:
com.bea.common.engine.ServiceInitializationException:
weblogic.security.spi.ProviderInitializationException:
[Security:090730]Failed to verify credential mapper LDAP hierarchy
netscape.ldap.LDAPException: Server or network error (81)
at netscape.ldap.LDAPConnThread.networkError(LDAPConnThread.java:768)
at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:555)
at java.lang.Thread.run(Thread.java:595)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:469)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:822)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:851)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1007)
at
weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:854)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
com.bea.common.engine.ServiceInitializationException:
weblogic.security.spi.ProviderInitializationException:
[Security:090730]Failed to verify credential mapper LDAP hierarchy
netscape.ldap.LDAPException: Server or network error (81)
at netscape.ldap.LDAPConnThread.networkError(LDAPConnThread.java:768)
at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:555)
at java.lang.Thread.run(Thread.java:595)
at
com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:342)
at
com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:292)
at
com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:263)
at
com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:71)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:461)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:822)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:851)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1007)
at
weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:854)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
weblogic.security.spi.ProviderInitializationException:
[Security:090730]Failed to verify credential mapper LDAP hierarchy
netscape.ldap.LDAPException: Server or network error (81)
at netscape.ldap.LDAPConnThread.networkError(LDAPConnThread.java:768)
at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:555)
at java.lang.Thread.run(Thread.java:595)
at
weblogic.security.providers.credentials.DefaultCredentialMapperLDAPHelper.getInstance(DefaultCredentialMapperLDAPHelper.java:115)
at
weblogic.security.providers.credentials.DefaultCredentialMapperProviderImpl.initialize(DefaultCredentialMapperProviderImpl.java:93)
at
com.bea.common.security.internal.legacy.service.SecurityProviderImpl.init(SecurityProviderImpl.java:53)
at
com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:340)
at
com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:292)
at
com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:263)
at
com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:71)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:461)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:822)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:851)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1007)
at
weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:854)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
>
####<2007-dec-18 kl 14:05 CET> <Critical> <WebLogicServer> <SESO-ODX251909>
<ManagedServer_1> <Main Thread> <<WLS Kernel>> <> <> <1197983149109>
<BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.security.service.SecurityServiceRuntimeException:
[Security:090399]Security Services Unavailable
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:898)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1029)
at
weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:854)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
I am using weblogic server 9.2 on windows. Node manager is working fine. i
have tried installing weblogic server several times but it gives the same
error each time i start a managed server. Kindly help.
Regards,
Alka -
Error starting managed server in weblogic
am having this error wne starting managed server
C:\mydomain\base_domain\bin>startManagedWebLogic.cmd madimad-b533821
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=
128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C
:\PROGRA~1\Java\JDK16~1.0_2\lib\tools.jar;C:\mywls\wlserver\server\lib\weblogic_
sp.jar;C:\mywls\wlserver\server\lib\weblogic.jar;C:\mywls\modules\features\weblo
gic.server.modules_10.3.4.0.jar;C:\mywls\wlserver\server\lib\webservices.jar;C:\
mywls\modules\ORGAPA~1.1/lib/ant-all.jar;C:\mywls\modules\NETSFA~1.0_1/lib/ant-c
ontrib.jar;C:\oracle\Middleware\wlserver_10.3\sip\server\lib\weblogic_sip.jar;C:
\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\mywls\wlserver\co
mmon\derby\lib\derbyclient.jar;C:\mywls\wlserver\server\lib\xqrl.jar
PATH=;C:\mywls\wlserver\server\native\win\32;C:\mywls\wlserver\server\bin;C:\myw
ls\modules\ORGAPA~1.1\bin;C:\PROGRA~1\Java\JDK16~1.0_2\jre\bin;C:\PROGRA~1\Java\
JDK16~1.0_2\bin;C:\Program Files\PC Connectivity Solution\;C:\product\11.2.0\dbh
ome_1\bin;C:\product\11.2.0\dbhome_1;C:\forms;C:\DevSuiteHome_1\jlib;C:\Program
Files\PHP;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Fil
es\Common Files\Roxio Shared\DLLShared;C:\Program Files\Common Files\Roxio Share
d\DLLShared;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared;C:\Program
Files\Common Files\DivX Shared;c:\Program Files\Java\jdk1.6.0_21\bin;C:\Program
Files\Common Files\Roxio Shared\10.0\DLLShared;C:\Program Files\Common Files\Rox
io Shared\DLLShared;C:\Program Files\Common Files\Roxio Shared\10.0\DLLShared;C:
\mywls;C:\mydomain\base_domain\bin;C:\Program Files\Java\jre6\bin\client;C:\Prog
ram Files\Java\jre6\bin;C:\Program Files\Java\jdk1.6.0_21\jre\bin;C:\Program Fil
es\Java\jdk1.6.0_21\bin;C:\Program Files\Java\jdk1.6.0_21;C:\Program Files\Java\
jre6;C:\DevSuiteHome_1\forms;C:\DevSuiteHome_1\cgenf61\admin;C:\DevSuiteHome_1\f
orms;C:\forms\sms_code.pll;C:\mywls\wlserver;C:\Java\jdk1.6.0_21;C:\mywls\wlserv
er\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_21"
Java(TM) SE Runtime Environment (build 1.6.0_21-b07)
Java HotSpot(TM) Client VM (build 17.0-b17, mixed mode)
Starting WLS with line:
C:\PROGRA~1\Java\JDK16~1.0_2\bin\java -client -Xms256m -Xmx512m -XX:CompileThr
eshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=madimad-b533
821 -Djava.security.policy=C:\mywls\wlserver\server\lib\weblogic.policy -Dweblog
ic.security.SSL.trustedCAKeyStore="C:\mywls\wlserver\server\lib\cacerts" -Xveri
fy:none -ea:com.bea.wcp... -da -Dplatform.home=C:\mywls\wlserver -Dwls.home=C:
\mywls\wlserver\server -Dweblogic.home=C:\mywls\wlserver\server -Dcommon.compon
ents.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.
logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\mydomai
n\BASE_D~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1
.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\mydomain\BASE_D~1\config\FM
WCON~1\servers\madimad-b533821 -Doracle.domain.config.dir=C:\mydomain\BASE_D~1\c
onfig\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\mydomain\BASE_D~1\config\FMWCON~1\
carml -Digf.arisidstack.home=C:\mydomain\BASE_D~1\config\FMWCON~1\arisidprovide
r -Doracle.security.jps.config=C:\mydomain\BASE_D~1\config\fmwconfig\jps-config.
xml -Doracle.deployed.app.dir=C:\mydomain\BASE_D~1\servers\madimad-b533821\tmp\_
WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracl
e\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\mo
dules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.prot
ocol -Dweblogic.jdbc.remoteEnabled=false -Dweblogic.management.discover=false
-Dweblogic.management.server=http://madimad-b533821:7001 -Dwlw.iterativeDev=fal
se -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false weblogic.Server
<24 Jan 2014 12:52:41 PM> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE
Provider self-integrity check for better startup performance. To enable this che
ck, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<24 Jan 2014 12:52:42 PM> <Info> <Security> <BEA-090906> <Changing the default R
andom Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable thi
s change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<24 Jan 2014 12:52:42 PM> <Notice> <WebLogicServer> <BEA-000395> <Following exte
nsions directory contents added to the end of the classpath:
C:\mydomain\base_domain\lib\sipactivator.jar>
<24 Jan 2014 12:52:42 PM> <Info> <Server> <BEA-002647> <The service plugin, com.
oracle.core.sip.activator, was added from C:\mydomain\base_domain\lib\sipactivat
or.jar.>
<24 Jan 2014 12:52:42 PM> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogi
c Server with Java HotSpot(TM) Client VM Version 17.0-b17 from Sun Microsystems
Inc.>
<24 Jan 2014 12:52:45 PM> <Info> <Security> <BEA-090065> <Getting boot identity
from user.>
Enter username to boot WebLogic server:tshifhiwa
Enter password to boot WebLogic server:
<24 Jan 2014 12:52:57 PM> <Info> <Management> <BEA-141107> <Version: WebLogic Se
rver 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 >
<24 Jan 2014 12:53:01 PM> <Error> <Management> <BEA-141252> <The domain version,
10.3.5.0, is greater than the release version, 10.3.4.0, of this server.>
<24 Jan 2014 12:53:01 PM> <Error> <Configuration Management> <BEA-150001> <An er
ror occurred while connecting to the admin server to bootstrap through URL: http
://madimad-b533821:7001/bea_wls_management_internal2/Bootstrap, user: tshifhiwa
weblogic.management.configuration.ConfigurationException: [Management:141252]The
domain version, 10.3.5.0, is greater than the release version, 10.3.4.0, of thi
s server.
at weblogic.management.provider.internal.BootStrapHelper.getBootStrapStr
uct(BootStrapHelper.java:147)
at weblogic.management.provider.internal.RuntimeAccessImpl.initialize(Ru
ntimeAccessImpl.java:432)
at weblogic.management.provider.internal.RuntimeAccessService.start(Runt
imeAccessService.java:49)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesMan
ager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServ
icesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:879)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:566)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:467)
at weblogic.Server.main(Server.java:71)
>
<24 Jan 2014 12:53:01 PM> <Notice> <WebLogicServer> <BEA-000365> <Server state c
hanged to STARTING>
<24 Jan 2014 12:53:01 PM> <Info> <WorkManager> <BEA-002900> <Initializing self-t
uning thread pool>
<24 Jan 2014 12:53:02 PM> <Notice> <LoggingService> <BEA-320400> <The log file C
:\mydomain\base_domain\servers\madimad-b533821\logs\madimad-b533821.log will be
rotated. Reopen the log file if tailing has stopped. This can happen on some pla
tforms like Windows.>
<24 Jan 2014 12:53:02 PM> <Notice> <LoggingService> <BEA-320401> <The log file h
as been rotated to C:\mydomain\base_domain\servers\madimad-b533821\logs\madimad-
b533821.log00007. Log messages will continue to be logged in C:\mydomain\base_do
main\servers\madimad-b533821\logs\madimad-b533821.log.>
<24 Jan 2014 12:53:02 PM> <Notice> <Log Management> <BEA-170019> <The server log
file C:\mydomain\base_domain\servers\madimad-b533821\logs\madimad-b533821.log i
s opened. All server side log events will be written to this file.>
<24 Jan 2014 12:54:25 PM> <Critical> <WebLogicServer> <BEA-000386> <Server subsy
stem failed. Reason: java.lang.AssertionError: Assertion violated
java.lang.AssertionError: Assertion violated
at weblogic.utils.Debug.assertion(Debug.java:57)
at weblogic.server.channels.ChannelService.getServerChannel(ChannelServi
ce.java:2060)
at weblogic.server.channels.ChannelService.getServerChannel(ChannelServi
ce.java:1998)
at weblogic.protocol.ServerChannelManager.findServerChannel(ServerChanne
lManager.java:76)
at weblogic.ldap.EmbeddedLDAP.findLdapURL(EmbeddedLDAP.java:1482)
Truncated. see log file for complete stacktrace
>
<24 Jan 2014 12:54:26 PM> <Notice> <WebLogicServer> <BEA-000365> <Server state c
hanged to FAILED>
<24 Jan 2014 12:54:26 PM> <Error> <WebLogicServer> <BEA-000383> <A critical serv
ice failed. The server will shut itself down>
<24 Jan 2014 12:54:26 PM> <Notice> <WebLogicServer> <BEA-000365> <Server state c
hanged to FORCE_SHUTTING_DOWN>Hi,
there are two thing in this issue.
first
It looks like the upgrade which you done is not happen correctly.
Revert the back the upgrade and restart the the server again.
Second
rename the Ldap folder of you managed server and restart the server again.
Regards,
Kal -
Error starting WebLogic server from Workshop - 2
Sorry forgot to actually include the error:
Unexpected exception:
java.io.IOException: CreateProcess: cmd.exe /C START startWebLogic error=267
at java.lang.Win32Process.create(Native Method)
at java.lang.Win32Process.<init>(Win32Process.java:63)
at java.lang.Runtime.execInternal(Native Method)
at java.lang.Runtime.exec(Runtime.java:550)
at jellybeans.util.ServerUtil$StartServerTask.runBackground(ServerUtil.java:363)
at jellybeans.core.task.TaskThread.execute(TaskThread.java:114)
at jellybeans.core.task.TaskThread.run(TaskThread.java:55)
Was caught at:
jellybeans.util.AssertionFailureException: Unexpected exception: CreateProcess: cmd.exe
/C START startWebLogic error=267
at jellybeans.util.AssertUtil.handleUnexpectedException(AssertUtil.java:50)
at jellybeans.util.ServerUtil$StartServerTask.runBackground(ServerUtil.java:367)
at jellybeans.core.task.TaskThread.execute(TaskThread.java:114)
at jellybeans.core.task.TaskThread.run(TaskThread.java:55)Evelyn,
Can you tell me the operating system on which you are running WebLogic
Workshop.
Thank You,
Raj Alagumalai
WebLogic Workshop Support
"Raj Alagumalai" <[email protected]> wrote in message
news:[email protected]..
Evelyn,
Are you able to start the server from the command line using
startweblogic.cmd ?
the file can be found under your beahome\weblogic700\samples\workshop
directory.
Did you have the older Beta installed on the same machine prior to
installing Beta2 ?
I'm not sure if you read this before.
The following is the set of steps to install Beta2
Before installing "Beta 2, uninstall your Beta 1 version like this:
1. Run the uninstaller
2. Delete the entire bea_home that housed Beta 1 (restart if necessary)
3. Restart
4. Install Beta 2
Also make sure that there is no .jellybeans or .workshop file in the
C:\Documents and Settings\username before to install Beta2
Thanks
Raj Alagumalai
WebLogic Workshop Support
Evelyn Hobson wrote:
Sorry forgot to actually include the error:
Unexpected exception:
java.io.IOException: CreateProcess: cmd.exe /C START startWebLogic
error=267
at java.lang.Win32Process.create(Native Method)
at java.lang.Win32Process.<init>(Win32Process.java:63)
at java.lang.Runtime.execInternal(Native Method)
at java.lang.Runtime.exec(Runtime.java:550)
atjellybeans.util.ServerUtil$StartServerTask.runBackground(ServerUtil.java:363
at jellybeans.core.task.TaskThread.execute(TaskThread.java:114)
at jellybeans.core.task.TaskThread.run(TaskThread.java:55)
Was caught at:
jellybeans.util.AssertionFailureException: Unexpected exception:CreateProcess: cmd.exe
/C START startWebLogic error=267
atjellybeans.util.AssertUtil.handleUnexpectedException(AssertUtil.java:50)
atjellybeans.util.ServerUtil$StartServerTask.runBackground(ServerUtil.java:367
at jellybeans.core.task.TaskThread.execute(TaskThread.java:114)
at jellybeans.core.task.TaskThread.run(TaskThread.java:55) -
Error starting managed server with JRockit VM
I getting this error when i start the server with Jrockit VM 3.1 with -Xthinthreads
option on. The OS is NT. Any clues , please ?
exception: couldn't initialize IOPort: The parameter is incorrect.
(error 87, fd 824) - with nested exception:
[java.lang.RuntimeException: java.io.IOException: couldn't initialize IOPort
e parameter is incorrect.
D:\i252\services>runtxnserver
JRockit build 3.1.4-CROSIS-20020429-1505, Thin Threads, Generational Concurr
Garbage Collector, started.
[JRockit] Starting Management Server on port 7090
Starting WebLogic Server ....
Connecting to http://ocncat2:7991...
<May 10, 2002 11:50:59 AM PDT> <Error> <NT Performance Pack> <Problem on fd:
4', socket: 'weblogic.rjvm.t3.T3JVMConnection@111'
java.io.IOException: couldn't initialize IOPort: The parameter is incorrect.
(error 87, fd 824)
at weblogic.socket.NTSocketMuxer.registerSockInIoPort(Native Method)
35c4a
at weblogic.socket.NTSocketMuxer.register(Compiled Code)@23e34e90
at weblogic.rjvm.t3.T3JVMConnection.createConnection(Compiled Code)@
2410
at weblogic.rjvm.Protocol.createConnection(Compiled Code)@23e321b0
at weblogic.rjvm.ConnectionManager.findOrCreateConnection(Compiled C
@23e31b90
at weblogic.rjvm.ConnectionManager.bootstrap(Compiled Code)@23e315b0
at weblogic.rjvm.ConnectionManager.bootstrap(Compiled Code)@23e30d00
at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(Compiled Cod
3e30810
at weblogic.rjvm.RJVMManager.findOrCreate(Compiled Code)@23e307b0
at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(Compiled Code)@
0660
at weblogic.rjvm.RJVMFinder.findOrCreate(Compiled Code)@23e3001c
at weblogic.rjvm.ServerURL.findOrCreateRJVM(Compiled Code)@23d7fa00
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(C
led Code)@23d7ec10
at weblogic.jndi.Environment.getContext(Compiled Code)@23d7e600
at weblogic.jndi.Environment.getInitialContext(Compiled Code)@23d7e5
at weblogic.management.Admin.initializeRemoteAdminHome(Compiled Code
d7db70
at weblogic.management.Admin.start(Compiled Code)@23d7c060
at weblogic.t3.srvr.T3Srvr.initialize(Compiled Code)@23590d00
at weblogic.t3.srvr.T3Srvr.run(Compiled Code)@23590240
at weblogic.Server.main(Compiled Code)@23590050
--- End of stack trace
>
<May 10, 2002 11:51:00 AM PDT> <Emergency> <Configuration Management> <Error
tected attempting to connect to admin server at http://ocncat2:7991 during i
alization of managed server ( null:7551 ). The reported error was: < java.io
xception: couldn't initialize IOPort: The parameter is incorrect.
(error 87, fd 824) > This condition generally results when the managed and
n servers are using the same listen address and port.>
<May 10, 2002 11:51:00 AM PDT> <Emergency> <Server> <Unable to initialize th
rver: 'Fatal initialization exception
Throwable: weblogic.management.configuration.ConfigurationException: java.io
xception: couldn't initialize IOPort: The parameter is incorrect.
(error 87, fd 824) - with nested exception:
[java.lang.RuntimeException: java.io.IOException: couldn't initialize IOPort
e parameter is incorrect.
(error 87, fd 824)]
java.lang.RuntimeException: java.io.IOException: couldn't initialize IOPort:
parameter is incorrect.
(error 87, fd 824)
at weblogic.socket.NTSocketMuxer.register(Compiled Code)@23e34e90
at weblogic.rjvm.t3.T3JVMConnection.createConnection(Compiled Code)@
2410
at weblogic.rjvm.Protocol.createConnection(Compiled Code)@23e321b0
at weblogic.rjvm.ConnectionManager.findOrCreateConnection(Compiled C
@23e31b90
at weblogic.rjvm.ConnectionManager.bootstrap(Compiled Code)@23e315b0
at weblogic.rjvm.ConnectionManager.bootstrap(Compiled Code)@23e30d00
at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(Compiled Cod
3e30810
at weblogic.rjvm.RJVMManager.findOrCreate(Compiled Code)@23e307b0
at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(Compiled Code)@
0660
at weblogic.rjvm.RJVMFinder.findOrCreate(Compiled Code)@23e3001c
at weblogic.rjvm.ServerURL.findOrCreateRJVM(Compiled Code)@23d7fa00
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(C
led Code)@23d7ec10
at weblogic.jndi.Environment.getContext(Compiled Code)@23d7e600
at weblogic.jndi.Environment.getInitialContext(Compiled Code)@23d7e5
at weblogic.management.Admin.initializeRemoteAdminHome(Compiled Code
d7db70
at weblogic.management.Admin.start(Compiled Code)@23d7c060
at weblogic.t3.srvr.T3Srvr.initialize(Compiled Code)@23590d00
at weblogic.t3.srvr.T3Srvr.run(Compiled Code)@23590240
at weblogic.Server.main(Compiled Code)@23590050
--- End of stack trace
--------------- nested within: ------------------
weblogic.management.configuration.ConfigurationException: java.io.IOExceptio
ouldn't initialize IOPort: The parameter is incorrect.
(error 87, fd 824) - with nested exception:
[java.lang.RuntimeException: java.io.IOException: couldn't initialize IOPort
e parameter is incorrect.
(error 87, fd 824)]
at weblogic.management.Admin.initializeRemoteAdminHome(Compiled Code
d7db70
at weblogic.management.Admin.start(Compiled Code)@23d7c060
at weblogic.t3.srvr.T3Srvr.initialize(Compiled Code)@23590d00
at weblogic.t3.srvr.T3Srvr.run(Compiled Code)@23590240
at weblogic.Server.main(Compiled Code)@23590050
--- End of stack trace
'>
The WebLogic Server did not start up properly.
Exception raised: weblogic.management.configuration.ConfigurationException:
.io.IOException: couldn't initialize IOPort: The parameter is incorrect.
(error 87, fd 824) - with nested exception:
[java.lang.RuntimeException: java.io.IOException: couldn't initialize IOPort
e parameter is incorrect.
(error 87, fd 824)]
java.lang.RuntimeException: java.io.IOException: couldn't initialize IOPort:
parameter is incorrect.
(error 87, fd 824)
at weblogic.socket.NTSocketMuxer.register(Compiled Code)@23e34e90
at weblogic.rjvm.t3.T3JVMConnection.createConnection(Compiled Code)@
2410
at weblogic.rjvm.Protocol.createConnection(Compiled Code)@23e321b0
at weblogic.rjvm.ConnectionManager.findOrCreateConnection(Compiled C
@23e31b90
at weblogic.rjvm.ConnectionManager.bootstrap(Compiled Code)@23e315b0
at weblogic.rjvm.ConnectionManager.bootstrap(Compiled Code)@23e30d00
at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(Compiled Cod
3e30810
at weblogic.rjvm.RJVMManager.findOrCreate(Compiled Code)@23e307b0
at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(Compiled Code)@
0660
at weblogic.rjvm.RJVMFinder.findOrCreate(Compiled Code)@23e3001c
at weblogic.rjvm.ServerURL.findOrCreateRJVM(Compiled Code)@23d7fa00
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(C
led Code)@23d7ec10
at weblogic.jndi.Environment.getContext(Compiled Code)@23d7e600
at weblogic.jndi.Environment.getInitialContext(Compiled Code)@23d7e5
at weblogic.management.Admin.initializeRemoteAdminHome(Compiled Code
d7db70
at weblogic.management.Admin.start(Compiled Code)@23d7c060
at weblogic.t3.srvr.T3Srvr.initialize(Compiled Code)@23590d00
at weblogic.t3.srvr.T3Srvr.run(Compiled Code)@23590240
at weblogic.Server.main(Compiled Code)@23590050
--- End of stack trace
--------------- nested within: ------------------
weblogic.management.configuration.ConfigurationException: java.io.IOExceptio
ouldn't initialize IOPort: The parameter is incorrect.
(error 87, fd 824) - with nested exception:
[java.lang.RuntimeException: java.io.IOException: couldn't initialize IOPort
e parameter is incorrect.
(error 87, fd 824)]
at weblogic.management.Admin.initializeRemoteAdminHome(Compiled Code
d7db70
at weblogic.management.Admin.start(Compiled Code)@23d7c060
at weblogic.t3.srvr.T3Srvr.initialize(Compiled Code)@23590d00
at weblogic.t3.srvr.T3Srvr.run(Compiled Code)@23590240
at weblogic.Server.main(Compiled Code)@23590050
--- End of stack traceI found the solution . The reason for this is that JRockit's High Performance Thread
System uses asynchrounous I/O "under the hood". Weblogic's Native I/O is also asynchronous.
The two asynchronous I/O systems clash and the result is the error you see.
There are two ways around this problem. Either disable JRockit's High Performance
Thread System (or thinthreads) by using the -Xnativethreads command line flag, or
disable Weblogic's Native I/O.
For Weblogic 6.0 and higher, edit the config.xml file. Find the line saying NativeIOEnabled="true"
and change this to NativeIOEnabled="false".
For Weblogic 5.1 you edit the file weblogic.properties and change the line weblogic.system.nativeIO.enable=true
to
weblogic.system.nativeIO.enable=false
"Manoj jayadevan" <[email protected]> wrote:
>
I getting this error when i start the server with Jrockit VM 3.1 with -Xthinthreads
option on. The OS is NT. Any clues , please ?
exception: couldn't initialize IOPort: The parameter is incorrect.
(error 87, fd 824) - with nested exception:
[java.lang.RuntimeException: java.io.IOException: couldn't initialize IOPort
e parameter is incorrect.
D:\i252\services>runtxnserver
JRockit build 3.1.4-CROSIS-20020429-1505, Thin Threads, Generational Concurr
Garbage Collector, started.
[JRockit] Starting Management Server on port 7090
Starting WebLogic Server ....
Connecting to http://ocncat2:7991...
<May 10, 2002 11:50:59 AM PDT> <Error> <NT Performance Pack> <Problem on
fd:
4', socket: 'weblogic.rjvm.t3.T3JVMConnection@111'
java.io.IOException: couldn't initialize IOPort: The parameter is incorrect.
(error 87, fd 824)
at weblogic.socket.NTSocketMuxer.registerSockInIoPort(Native Method)
35c4a
at weblogic.socket.NTSocketMuxer.register(Compiled Code)@23e34e90
at weblogic.rjvm.t3.T3JVMConnection.createConnection(Compiled Code)@
2410
at weblogic.rjvm.Protocol.createConnection(Compiled Code)@23e321b0
at weblogic.rjvm.ConnectionManager.findOrCreateConnection(Compiled
C
@23e31b90
at weblogic.rjvm.ConnectionManager.bootstrap(Compiled Code)@23e315b0
at weblogic.rjvm.ConnectionManager.bootstrap(Compiled Code)@23e30d00
at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(Compiled
Cod
3e30810
at weblogic.rjvm.RJVMManager.findOrCreate(Compiled Code)@23e307b0
at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(Compiled Code)@
0660
at weblogic.rjvm.RJVMFinder.findOrCreate(Compiled Code)@23e3001c
at weblogic.rjvm.ServerURL.findOrCreateRJVM(Compiled Code)@23d7fa00
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(C
led Code)@23d7ec10
at weblogic.jndi.Environment.getContext(Compiled Code)@23d7e600
at weblogic.jndi.Environment.getInitialContext(Compiled Code)@23d7e5
at weblogic.management.Admin.initializeRemoteAdminHome(Compiled
Code
d7db70
at weblogic.management.Admin.start(Compiled Code)@23d7c060
at weblogic.t3.srvr.T3Srvr.initialize(Compiled Code)@23590d00
at weblogic.t3.srvr.T3Srvr.run(Compiled Code)@23590240
at weblogic.Server.main(Compiled Code)@23590050
--- End of stack trace
>
<May 10, 2002 11:51:00 AM PDT> <Emergency> <Configuration Management> <Error
tected attempting to connect to admin server at http://ocncat2:7991 during
i
alization of managed server ( null:7551 ). The reported error was: < java.io
xception: couldn't initialize IOPort: The parameter is incorrect.
(error 87, fd 824) > This condition generally results when the managed
and
n servers are using the same listen address and port.>
<May 10, 2002 11:51:00 AM PDT> <Emergency> <Server> <Unable to initialize
th
rver: 'Fatal initialization exception
Throwable: weblogic.management.configuration.ConfigurationException: java.io
xception: couldn't initialize IOPort: The parameter is incorrect.
(error 87, fd 824) - with nested exception:
[java.lang.RuntimeException: java.io.IOException: couldn't initialize IOPort
e parameter is incorrect.
(error 87, fd 824)]
java.lang.RuntimeException: java.io.IOException: couldn't initialize IOPort:
parameter is incorrect.
(error 87, fd 824)
at weblogic.socket.NTSocketMuxer.register(Compiled Code)@23e34e90
at weblogic.rjvm.t3.T3JVMConnection.createConnection(Compiled Code)@
2410
at weblogic.rjvm.Protocol.createConnection(Compiled Code)@23e321b0
at weblogic.rjvm.ConnectionManager.findOrCreateConnection(Compiled
C
@23e31b90
at weblogic.rjvm.ConnectionManager.bootstrap(Compiled Code)@23e315b0
at weblogic.rjvm.ConnectionManager.bootstrap(Compiled Code)@23e30d00
at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(Compiled
Cod
3e30810
at weblogic.rjvm.RJVMManager.findOrCreate(Compiled Code)@23e307b0
at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(Compiled Code)@
0660
at weblogic.rjvm.RJVMFinder.findOrCreate(Compiled Code)@23e3001c
at weblogic.rjvm.ServerURL.findOrCreateRJVM(Compiled Code)@23d7fa00
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(C
led Code)@23d7ec10
at weblogic.jndi.Environment.getContext(Compiled Code)@23d7e600
at weblogic.jndi.Environment.getInitialContext(Compiled Code)@23d7e5
at weblogic.management.Admin.initializeRemoteAdminHome(Compiled
Code
d7db70
at weblogic.management.Admin.start(Compiled Code)@23d7c060
at weblogic.t3.srvr.T3Srvr.initialize(Compiled Code)@23590d00
at weblogic.t3.srvr.T3Srvr.run(Compiled Code)@23590240
at weblogic.Server.main(Compiled Code)@23590050
--- End of stack trace
--------------- nested within: ------------------
weblogic.management.configuration.ConfigurationException: java.io.IOExceptio
ouldn't initialize IOPort: The parameter is incorrect.
(error 87, fd 824) - with nested exception:
[java.lang.RuntimeException: java.io.IOException: couldn't initialize IOPort
e parameter is incorrect.
(error 87, fd 824)]
at weblogic.management.Admin.initializeRemoteAdminHome(Compiled
Code
d7db70
at weblogic.management.Admin.start(Compiled Code)@23d7c060
at weblogic.t3.srvr.T3Srvr.initialize(Compiled Code)@23590d00
at weblogic.t3.srvr.T3Srvr.run(Compiled Code)@23590240
at weblogic.Server.main(Compiled Code)@23590050
--- End of stack trace
'>
The WebLogic Server did not start up properly.
Exception raised: weblogic.management.configuration.ConfigurationException:
.io.IOException: couldn't initialize IOPort: The parameter is incorrect.
(error 87, fd 824) - with nested exception:
[java.lang.RuntimeException: java.io.IOException: couldn't initialize IOPort
e parameter is incorrect.
(error 87, fd 824)]
java.lang.RuntimeException: java.io.IOException: couldn't initialize IOPort:
parameter is incorrect.
(error 87, fd 824)
at weblogic.socket.NTSocketMuxer.register(Compiled Code)@23e34e90
at weblogic.rjvm.t3.T3JVMConnection.createConnection(Compiled Code)@
2410
at weblogic.rjvm.Protocol.createConnection(Compiled Code)@23e321b0
at weblogic.rjvm.ConnectionManager.findOrCreateConnection(Compiled
C
@23e31b90
at weblogic.rjvm.ConnectionManager.bootstrap(Compiled Code)@23e315b0
at weblogic.rjvm.ConnectionManager.bootstrap(Compiled Code)@23e30d00
at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(Compiled
Cod
3e30810
at weblogic.rjvm.RJVMManager.findOrCreate(Compiled Code)@23e307b0
at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(Compiled Code)@
0660
at weblogic.rjvm.RJVMFinder.findOrCreate(Compiled Code)@23e3001c
at weblogic.rjvm.ServerURL.findOrCreateRJVM(Compiled Code)@23d7fa00
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(C
led Code)@23d7ec10
at weblogic.jndi.Environment.getContext(Compiled Code)@23d7e600
at weblogic.jndi.Environment.getInitialContext(Compiled Code)@23d7e5
at weblogic.management.Admin.initializeRemoteAdminHome(Compiled
Code
d7db70
at weblogic.management.Admin.start(Compiled Code)@23d7c060
at weblogic.t3.srvr.T3Srvr.initialize(Compiled Code)@23590d00
at weblogic.t3.srvr.T3Srvr.run(Compiled Code)@23590240
at weblogic.Server.main(Compiled Code)@23590050
--- End of stack trace
--------------- nested within: ------------------
weblogic.management.configuration.ConfigurationException: java.io.IOExceptio
ouldn't initialize IOPort: The parameter is incorrect.
(error 87, fd 824) - with nested exception:
[java.lang.RuntimeException: java.io.IOException: couldn't initialize IOPort
e parameter is incorrect.
(error 87, fd 824)]
at weblogic.management.Admin.initializeRemoteAdminHome(Compiled
Code
d7db70
at weblogic.management.Admin.start(Compiled Code)@23d7c060
at weblogic.t3.srvr.T3Srvr.initialize(Compiled Code)@23590d00
at weblogic.t3.srvr.T3Srvr.run(Compiled Code)@23590240
at weblogic.Server.main(Compiled Code)@23590050
--- End of stack trace
Maybe you are looking for
-
Appleworks: bounces once, and stops!
I have read several of the posts about Appleworks and this problem (see below) and have managed to confuse myself about trashing preferences, plists, etc. From the suggestions quoted below the crash log, will someone point out the correct order to tr
-
Dear Friends, Please help me in resolving this problem. I have a MAC G4. OS X is installed on it. The OS freezes as it starts up. No icon appears on the desktop. I have the Restore CD and the Mac OS X installation CDs. I have data on the MAC. Vicken
-
Problem in PDF creation (the size of the page different or the content cut)
Hi everybody, i have a random problem when i save PDF from illustrator (CS6 o CC, the same): if i open a saved PDF in illustrator is correct both the size of the page that the content. if I open it in Acrobat I see the size of the page different or
-
I have a java web application that is running on Sun's web server for a few years. It consists of jsp pages. In one of the jsp pages, there is a string for database. The database location and name is changing. I can change the jsp page in notepad wit
-
The default email program is now crashing as soon as I open it
I tried turning the iPad off, plugging it in, etc., but nothing is helping. No especially large email was received. Short of delisting my email accounts or wiping the ipad, any ideas?