Error starting Report Builder 10.1.2.0.2

Hi there,
I can't start Report Builder 10.1.2.0.2 on Windows 2003 server properly, from any user other than administrator.
It gives error rep:0118 Unable to create a temporary file
Any input would be highly appreciated
Thanks
Nidhi
Message was edited by:
nj
Message was edited by:
nj

You definitely have a problems with rights. It was installed by Administrator and the user you're trying to run it with doesn't have the rights to access those files. An easy solution should be to include your user in the administrator group. You can also, as administrator, give read/write priviledge to the Reports installation directory to anyone.
Regards,
Martin

Similar Messages

  • Unable to Start Report Builder

    Hi,
    I am new to report server. After installing it I am able to start Report Manager, however when I click on Report Builder button in Report manager, I get the following dialog:
    Cannot download the aplication. The application is missing required files. Contact application vendor for assistance.
    When I press the 'Details' button, I get this (pasting here):
    PLATFORM VERSION INFO
     Windows    : 6.1.7601.65536 (Win32NT)
     Common Language Runtime  : 4.0.30319.18052
     System.Deployment.dll   : 4.0.30319.17929 built by: FX45RTMREL
     clr.dll    : 4.0.30319.18052 built by: FX45RTMGDR
     dfdll.dll    : 4.0.30319.17929 built by: FX45RTMREL
     dfshim.dll    : 4.0.41209.0 (Main.041209-0000)
    SOURCES
     Deployment url   :
    file:///C:/Users/Peter%20Battelino/Downloads/ReportBuilder_3_0_0_0%20(4).application
    IDENTITIES
     Deployment Identity  : ReportBuilder_3_0_0_0.application, Version=11.0.2100.60, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86
    APPLICATION SUMMARY
     * Online only application.
     * Trust url parameter is set.
    ERROR SUMMARY
     Below is a summary of the errors, details of these errors are listed later in the log.
     * Activation of C:\Users\Peter Battelino\Downloads\ReportBuilder_3_0_0_0 (4).application resulted in exception. Following failure messages were detected:
      + Downloading file:///C:/Users/Peter Battelino/Downloads/RptBuilder_3/MSReportBuilder.exe.manifest did not succeed.
      + Could not find a part of the path 'C:\Users\Peter Battelino\Downloads\RptBuilder_3\MSReportBuilder.exe.manifest'.
      + Could not find a part of the path 'C:\Users\Peter Battelino\Downloads\RptBuilder_3\MSReportBuilder.exe.manifest'.
      + Could not find a part of the path 'C:\Users\Peter Battelino\Downloads\RptBuilder_3\MSReportBuilder.exe.manifest'.
    COMPONENT STORE TRANSACTION FAILURE SUMMARY
     No transaction error was detected.
    WARNINGS
     There were no warnings during this operation.
    OPERATION PROGRESS STATUS
     * [7/25/2013 9:31:36 AM] : Activation of C:\Users\Peter Battelino\Downloads\ReportBuilder_3_0_0_0 (4).application has started.
     * [7/25/2013 9:31:36 AM] : Processing of deployment manifest has successfully completed.
     * [7/25/2013 9:31:36 AM] : Installation of the application has started.
    ERROR DETAILS
     Following errors were detected during this operation.
     * [7/25/2013 9:31:36 AM] System.Deployment.Application.DeploymentDownloadException (Unknown subtype)
      - Downloading file:///C:/Users/Peter Battelino/Downloads/RptBuilder_3/MSReportBuilder.exe.manifest did not succeed.
      - Source: System.Deployment
      - Stack trace:
       at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
       at System.Deployment.Application.SystemNetDownloader.DownloadAllFiles()
       at System.Deployment.Application.FileDownloader.Download(SubscriptionState subState)
       at System.Deployment.Application.DownloadManager.DownloadManifestAsRawFile(Uri& sourceUri, String targetPath, IDownloadNotification notification, DownloadOptions options, ServerInformation& serverInformation)
       at System.Deployment.Application.DownloadManager.DownloadApplicationManifest(AssemblyManifest deploymentManifest, String targetDir, Uri deploymentUri, IDownloadNotification notification, DownloadOptions options, Uri& appSourceUri, String&
    appManifestPath)
       at System.Deployment.Application.DownloadManager.DownloadApplicationManifest(AssemblyManifest deploymentManifest, String targetDir, Uri deploymentUri, Uri& appSourceUri, String& appManifestPath)
       at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
       at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
       at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
       at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
      --- Inner Exception ---
      System.Net.WebException
      - Could not find a part of the path 'C:\Users\Peter Battelino\Downloads\RptBuilder_3\MSReportBuilder.exe.manifest'.
      - Source: System
      - Stack trace:
       at System.Net.FileWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.FileWebRequest.GetResponse()
       at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
      --- Inner Exception ---
      System.Net.WebException
      - Could not find a part of the path 'C:\Users\Peter Battelino\Downloads\RptBuilder_3\MSReportBuilder.exe.manifest'.
      - Source: System
      - Stack trace:
       at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
       at System.Net.FileWebRequest.GetResponseCallback(Object state)
      --- Inner Exception ---
      System.IO.DirectoryNotFoundException
      - Could not find a part of the path 'C:\Users\Peter Battelino\Downloads\RptBuilder_3\MSReportBuilder.exe.manifest'.
      - Source: mscorlib
      - Stack trace:
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy, Boolean
    useLongPath, Boolean checkHost)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, Boolean useAsync)
       at System.Net.FileWebStream..ctor(FileWebRequest request, String path, FileMode mode, FileAccess access, FileShare sharing, Int32 length, Boolean async)
       at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
    COMPONENT STORE TRANSACTION DETAILS
     No transaction information is available.
    Does anybody know what the rpoble is?
    Thank you in advance.
    Peter Battelino
    BTE Corporation 
    PMBT

    Hi Pmbt,
    From your description, you cannot start Report Builder using Google Chrome, right? In Reporting Services, you use a Web browser to view reports and run Report Manager. Not all report functionality is supported by all browsers. Google Chrome is not a supported
    browser for SSRS. So we recommend you to start Report Builder using IE. For the detail information about it, please see:
    http://msdn.microsoft.com/en-us/library/ms156511(v=sql.105).aspx
    http://social.technet.microsoft.com/Forums/sqlserver/en-US/f50eb196-3f15-408d-acb7-7f90e3348e3e/why-does-the-ssrs-calendar-control-not-work-in-google-chrome-but-plenty-of-other-websites-with
    If you have any questions, please feel free to ask.
    Regards,
    Charlie Liao
    TechNet Community Support

  • Rep-0118:Unable to create temporary file error in Report Builder

    I have installed Report Builder (latest edition) for windows 2000 server, but my users on windows XP cannot create the report it gives them
    Rep-0118:Unable to create temporary file error
    Please help me out
    Vijay

    You have to change registry settings by going through REGEDIT. Under hkey_local_machine/software/oracle/<oracle home>, look for variable REPORTS_TMP. Change value for this, for example c:\windows\temp or something like that where you want oracle reports to create temp files.

  • Error in Report Builder

    I receive the below error while connection to Report Builder 10g
    Error: Unable to find Temporary File.

    Welcome to the forums !
    This forum is meant for discussions related to database installs - pl repost in the "Reports" forum - Reports
    HTH
    Srini

  • Error in report builder wizard user interface

    I am getting error 'REP-31954: Error in the Report Builder Chart Wizard user interface'.
    The help subsystem states that I should make sure that the Chart Builder Wizard libraries are properly installed.
    I am sure they are because all other wizards work fine, along with the Forms, Reports, etc.
    I searched using Google and found two messages that indicate this is a bug in the program and not library installation related.
    Does anyone know if this is indeed a bug that has not been resolved, or do I need to troubleshoot more on my end.
    I re-linked Oracle graphics and checked the env variables, but nothing gets the Chart Wizard to work within Reports or Forms.
    Any help/advice would be greatly appreciated.
    Thank you.

    Hi.
    I am running developer 6i on my home machine (with Oracle 8i, v 8.1.7). I am at work at the moment, and I can't recall what the Reports version is. The same error occurs with Forms.
    The filename that I downloaded is called 'd2k6irelease2.tar'.
    I downloaded the version that is currently on Oracle OTN's download site, so I presume that is the latest version that should contain all patches, updates, etc.
    Thank you for responding!

  • Time out error on Report builder

    Hello,
    There is a report I built that pulls a lot of data understandably.
    However, when I run this report, it times out. I have set the time out value to be 0 and it still times out.
    The only error it brings is that, The operation has timed out..
    Please help

    Hi sanjb12001,
    As per my understanding, you created a report, when you run the report with report builder, you got the error message: The operation has timed out.
    The report server does not limit the size of a report definition. However, ASP.NET imposes a maximum size for items that are posted to the server. If we upload or publish a report definition that exceeds this limit to a report server, you receive an HTTP
    exception. To solve the problem, we can set the executionTimeout to 3600 (seconds) and set maxRequestLength to 2097151 in the httpRuntime tag of the web.config file(location: C:\Program Files\Microsoft SQL Server\ServerInstance \Reporting Services\ReportServer)
    like below:
    <system.web>
    <httpRuntime maxRequestLength="2097151" executionTimeout="3600"/>
    </system.web>
    If the problem remain unresolved, i would appreciate it if you could give us detailed error log(default location: %programfiles%\Microsoft SQL Server\<SQL Server Instance>\Reporting Services\LogFiles), it will help us move more quickly toward a solution.
    Thanks,
    Wendy Fu
    Wendy Fu
    TechNet Community Support

  • Cannot start Report Builder

    Hi gurus,
    I'm currently working on eBs R12. As per subect, I cannot run report builder (Report Builder: Release 10.1.2.0.2).
    From a terminal window, I am used to run rwbld60 & command (after setting environment variable and export DISPLAY) but in this case an error message appears saying (more or less) : rwbld command cannot be found.
    Any hint ?
    Thanks in advance,
    Michele

    Tnx a lot!!
    Now I get the usual REP-300 error.. :-( .. just keeping investigating on this.
    Display is set properly.
    Any other clues?
    Tnx again,
    MM

  • Re:error in report builder wizard user interface

    I am getting error 'REP-31954: Error in the Report Builder Chart Wizard user interface'.
    The help subsystem states that I should make sure that the Chart Builder Wizard libraries are properly installed. I am sure they are because all other wizards work fine, along with the Forms, Reports, etc. I searched using Google and found two messages that indicate this is a bug in the program and not library installation related. Does anyone know if this is indeed a bug that has not been resolved, or do I need to troubleshoot more on my end. I re-linked Oracle graphics and checked the env variables, but nothing gets the Chart Wizard to work within Reports or Forms. I am running developer 6i on my home machine (with Oracle 8i, v 8.1.7). The same error occurs with Forms. The filename that I downloaded is called 'd2k6irelease2.tar'. I downloaded the version that is currently on Oracle OTN's download site, so I presume that is the latest version that should contain all patches, updates, etc.
    Any help/advice would be greatly appreciated.
    Thank you for responding!

    Hi Adrian,
    Got the following when grepped through the web. You can give a try and see whether it works :
    1) Open the report in the Builder. In the properties for the graphic image, change to the proper UNIX path. Also, ensure the .ogd file which is referenced is also placed in the proper UNIX directory, so that the new path is reflected accurately.
    2) Ensure that your environment have the ORACLE_HOME set properly and then try re-linking with Graphics.
    Thanks,
    Vinod

  • Hexdecimal value 0x00 error in Report Builder

    Hello All,
    I am getting the following error in the Report Builder. I figured out there is some issue with one of the parameter that I am using in the Report. When I don't select available values and default values for the parameter report works alright. Any thoughts
    on this.

    Hi Amol_SCI,
    Have you checked to see what characters are on or around line 1, position 3707? Hexadecimal value 0x00 is a Null character. Based on the error, you may have some corruption or invalid characters in the XML file. 
    As per my understanding, I think the issue can be caused by there are some Junk characters in the data parameter value. So we can right-click the RDL file and choose View Code to open the report definition file in the XML editor window.  Make sure to
    save a backup copy before making any manual changes to the report definition. 
    If the problem persists, copy and paste the contents of the RDL (or a section) into a post to this thread. It will help us to reproduce this issue, and then assist you to resolve. Here is a similar thread, please see:
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/677a621a-25a8-4f23-9586-53a1cff88f04/hexadecimal-value-0x00-is-an-invalid-character?forum=sqlreportingservices
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Log errors in Report Builder

    hello,
    i wan't to start a document generation from java.
    runtime.exec() ...
    this works fine. but how can my application determine if
    something went wrong with document generation. this could
    be a log file, which could be parsed by a java application.
    what kind of informations could be written from report builder
    to a log file ?
    how to do that ?
    can i specify which document generation went wrong via a log
    file ?
    did anybody do things like that and could give me some hints ?
    thanks for any help
    Thorsten Lorenz

    Hello,
    You can try to activate the trace.
    See TRACEFILE and TRACEOPTS argument of the RWRUN command line.
    If you use that you can not control the format of the log.
    Another way could be to generate a log file using PL/SQL trigger -before reports, after Reports and TEXT_IO package- and look for information in the new file from your java program. (caller)
    Regards
    Tugdual Grall

  • Error starting Forms builder 10.1.2.0.2

    Dears,
    I just installed Oracle developer suite 10.1.2.0.2 on my xp sp2 machine. When I start the forms builder, I get a window error Oracle forms designer has encountered a problem and needs to clise, when I click on error report contents, it shows the problem in:
    Error signature
    AppName: frmbld.exe
    AppVer: 10.1.2.0
    ModeName: usp10.dll
    ModVer: 1.420.2600.2180
    Offset: 00032645
    I tried de-install / install from different version and I get the same error, at the end I de-installed Oracle server 9i r2 from my machine, and tried to re-install developer suite complete again, but facing the same issue.
    I had this version working before in previous installation, but I don't know what changed, and my windows version is very stable.
    Could you please help, and add any suggestion, otherwise I will have it the hard way and re-install windows, which I really not in the situation to waste more hours for its setup & other application.

    Dears,
    I solved the issue by replacing usp10.dll in windows, with the help of this article http://home.clara.net/bauhahnm/Khmer/usp10.html
    Thanks

  • Error Starting Report Server Services

    Hey all
    I have Install 9iAS it was working fine but When I Restart server mechine Report services unable to start
    Give error:-
    "Windows could not start the ORacle Reports Server [Rep60_ORA] on local Computer.
    for more information, review the system Event Log. If this is a non-Microsoft Service,
    Contact the service vendor, and refer to service-secific error code 186."
    See my report server log file:-
    E:\oracle\806\REPORT60\SERVER\Rep60_ORA.log.
    *** 2004-02-03 23:04:17 -- Server is starting up.
    *** 2004-02-04 03:58:49 -- Server started up an engine. (Rep60_ORA)
    *** 2004-02-04 04:28:57 -- Server shutting down an engine. (Rep60_ORA)
    *** 2004-02-04 04:45:00 -- Server is starting up.
    *** 2004-02-04 04:45:00 -- Daemon failed to listen to port
    *** 2004-02-04 04:55:55 -- Server is starting up.
    *** 2004-02-04 04:55:55 -- Daemon failed to listen to port
    *** 2004-02-04 04:58:46 -- Server is starting up.
    *** 2004-02-04 04:58:46 -- Daemon failed to listen to port
    *** 2004-02-04 15:53:35 -- Server is starting up.
    *** 2004-02-04 15:53:35 -- Daemon failed to listen to port
    Have anybady can solve this problem?
    Thanks

    I think your newly created report90 listens on the same port as your old rep60 service. Uninstall this service and install rep60 with a different port number or let reports 90 use a different port number

  • Error Starting Reports

    I have Windows 98 and I am getting the following messages when I start up Reports 6i:
    "RWBLD60.EXE -A device attached to the system is not fucntioning"
    "The DE60.DLL file is linked to missing export UIW60.DLL:11044"
    Can anyone help me with fixing this problem? Thanks!!!!

    Hello,
    181 views so far but no replies plz revert if u need any other info ..
    for wersion of weblogic server and forms etc. i had given a link to my previous tthread. this is the same issue. only thing is i got rid of the original error for which i had started thread, but now i have end-up with this error.
    still if anybory thinks that i should provide verision then below is additional info.
    weblogic server version :-- 10.3.2
    weblogic forms version :-- 11.1.1.2.0
    OS platoform :-- OEL 5.3 and Fedora Core 13 ( Tried on Both)
    another thing is when i go to /usr/lib/openmotif i can see file libXm.so.4
    [oracle@localhost ~]$ cd /usr/lib/openmotif/
    [oracle@localhost openmotif]$ ls -ltr
    total 3312
    -rwxr-xr-x 1 root root  434212 Apr  1 23:21 libUil.so.4.0.3
    -rwxr-xr-x 1 root root  148972 Apr  1 23:21 libMrm.so.4.0.3
    -rwxr-xr-x 1 root root 2799268 Apr  1 23:21 libXm.so.4.0.3
    lrwxrwxrwx 1 root root      15 Sep 18 12:21 libMrm.so.4 -> libMrm.so.4.0.3
    lrwxrwxrwx 1 root root      15 Sep 18 12:21 libUil.so.4 -> libUil.so.4.0.3
    lrwxrwxrwx 1 root root      14 Sep 18 12:21 libXm.so.4 -> libXm.so.4.0.3
    lrwxrwxrwx 1 root root      15 Sep 18 12:21 libUil.so -> libUil.so.4.0.3
    lrwxrwxrwx 1 root root      15 Sep 18 12:21 libMrm.so -> libMrm.so.4.0.3
    lrwxrwxrwx 1 root root      14 Sep 18 12:21 libXm.so -> libXm.so.4.0.3
    [oracle@localhost openmotif]$ Thank You

  • Error starting Reporting and Analysis Framework agent

    We are running Hyperion 11.1.1.4. We have been running fine; however, we stopped the agent yesterday (in our TEST environment) and when we tried restarting it we get an error: Failed to start agent service. What could be causing this error? We're running on RedHat Linux v5.3. When you try to login to Workspace and as expected, you get an error message.
    We are having this exact same issue in our DEV environment. Both DEV and TEST servers were powered down and moved in our data center over the weekend. I have confirmed that the IP address of the server has not changed.
    Any ideas you can give would be appreciated.
    Terri T.

    Look in Oracle/Middleware/user_projects/epmsystem1/diagnostics/logs/ReportingAnalysis
    specifically at stdout_console_default.log
    And at other files recently modified in that dir if you do not see anything.
    Post any relevant errors.
    you might just try to kill off everything and make sure there are no processes running.
    stop all services and assuming you are not root ,
    "kill -9 -1" will kill absolutely everything running with your user id, including your shell. Log back in and try to start.

  • Report Builder 6i will not start

    I have developer 6i Report Builder and Form Builder on new laptop. Installation appeared to work fine. However, when I try to start Report Builder, it shows the splash screen for a few seconds and then it just goes away. The application will not open. Same for the Form Builder. I did Typical install for each, so I believe all requisite components have also been installed. Any suggestions would be appreciated.

    Some progress, but still not there..... Last night I un-installed my 11g client and developer 6i. Then, I installed 6i first. I verified that I was able to open both Report Builder and Form Builder applications. Then I re-installed the 11g client. Again, I was still able to run both developer applications. HOWEVER, when I try to open existing reports, the Report Builder immediately closes without giving an error. When I try to open an existing form, Form Builder gives me "Failed to load in the color pallette". It appears to load the form, but when I look, it is missing most of the trigger and program unit data.

Maybe you are looking for

  • Report for sales target & Production target

    Report for sales target & Production target which should include the following fields Sales Target Revised Sales Target Production Target Revised Production Target Action Need to be taken

  • How to put Authorisation Check?

    Hi, I have built a Module Program. In this there is a Save Button where information in the screen is saved to a Z table. I need to put an Authorisation check to this save button. That is only users who have “Save” capability could save. Simply there

  • Invoice value including subsequent debit

    Hi Friends,      I have posted an invoice for a material. Later i have posted subsequent debit for the extra value. Now i would like to see, how much i have spent for that material including subsequent debit amount. Where can i see that value, kindly

  • Live Recording with mics and Software Instruments

    Has anyone used the Software Instruments in GB to play live, while recording the Software Instruments direct and live (Real Instruments) as well? I'm thinking about getting a FirePod or similar, to record my band live using several mics and playing a

  • Chinese language not support in N93i...

    hi.. i have trouble with my nokia N93i, is it anyone here using nokia N93i with chinese word inside.. coz my phone is not support chinese language, i already update my fone but still don't have chinese language.. anyone here can help me??