Error System "Item does not exist. It may have been deleted by another user"
Error System "Item does not exist. It may have been deleted by another user" in sharepoint 2010
This is problem show when User new item in List . User open new item page about 3 pages and User save each one page when page save complete , User will save another page.
Sometime User can not save item , it show that error
This List not have workflow and code
Please let me know what is the issue ?
Hi,
Greetings. THis is a known issue and see the links for resolution
http://support.microsoft.com/kb/972225
http://social.technet.microsoft.com/Forums/office/en-US/638e4aa0-527c-4b20-a899-a0cf181983ec/no-item-exists-at-it-may-have-been-deleted-or-renamed-by-another-user?forum=sharepointadminlegacy
Please remember to click 'Mark as Answer' on the answer if it helps you
Similar Messages
-
There are dozens of entries regarding "
List does not exist / The page you selected
contains a list that does not exist. It may have been deleted by another user" and none of them are really SP 2013 so i thought I would create this entry.
I am getting the error above after creating a simple list with 4 columns. the list is created during a new site definition activation but when I click on my list, I get the error above. the list works if I deactivate the feature and re-activate
it. but has the error whenever the new site definition is created.
Has anybody encountered this issue on SP 2013?Hi,
For your issue, there are plenty of possible reasons offered when we search this issue online.
Here are similar issue posts, check whether they are helpful:
http://sharepoint.stackexchange.com/questions/98239/list-does-not-exist-error-when-opening-the-views
http://sharepoint2u.com/?p=56https://shareyourpoint.wordpress.com/2012/04/12/list-does-not-exist-the-page-you-selected-contains-a-list-that-does-not-exist-it-may-have-been-deleted-by-another-user-sharepoint-2010-error/
http://spnovice.blogspot.com/2012/10/list-does-not-exist-or-does-it.html
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support -
Item does not exist. It may have been deleted by another user
Hi,
I am getting a strange issue with the error "Item does not exist. It may have been deleted by another user " with the below code which was under "RunWithElevatedPrivileges" in a application page.
public void test(int requestId)
SPList list= web.Lists["test"];
SPListItem lstItem = list.GetItemById(Convert.ToInt32(requestId)); //Error
But when I test the above code in a console application, it is working fine & I am sure the id exist in the list.
Can any one help me on this issue!
Thanks In Advance,
Kumar.Ok.
Go to the sharepoint list and check the item with id is exist or not?
Retrieve the data using another column instead of id column.
Just for testing.
Check the below way also
SPQuery query = new SPQuery();
query.Query = "<Where><Eq><FieldRef Name=\"ID\"></FieldRef><Value Type=\"Integer\">" + id.ToString(CultureInfo.InvariantCulture) + "</Value></Eq></Where>"; -
Hi everybody!
I have a sharepoint 2013 farm with 5 sever. I upgraded a site from sharepoint
2007 to sharepoint 2013. I had some problems to install and configure workflow manager and register it. but by now I found problems and I can create a workflow and run it successfully. My big problem is when I try to get a lookup field in my flow. the
flow suspended and I got the following error:
“List does not exist . The page you selected contains a list that does not exists. It may have been deleted by another user.”
Any solution???
Thanks in advance!Hi,
Please make sure the source list of the lookup column and the list which consumes the content from the lookup column exists on the site collection.
In addition, to correct this problem the following steps should be applied:
Delete the affected Workflow association
Go to "Central Administration" - "Application Management"
Select the affected web application and choose "General Settings" - "Resource Throttling"
Increase the value configured as "List View Lookup Threshold"
Perform an iisreset to ensure that all in memory instances of the web application settings are gone
Add the Workflow association back to the list
More information is here:
http://social.technet.microsoft.com/Forums/en-US/3aeeba20-07dd-4e46-941b-a3db1bb3577e/sharepoint-2013-designer-workflow-the-page-you-selected-contains-a-list-that-does-not-exist?forum=sharepointcustomization
Best Regards
Dennis Guo
TechNet Community Support -
When a certain user saves a file in Excel 2010, she gets a message: "The file <name of file> may have been changed by another user since you last saved it." She can choose to save as another file or overwrite with her changes.
This just started happening a week or so ago. She was concerned that someone else was accessing her files, but we did several tests that opened, made a change and saved in a matter of seconds, and she still gets the message. It happens on
most files, but not all – both network and local.
We already tried the QFE_Saskatchewan registry fix. I also checked the file server for Services for Macintosh.You may be confused by the error in Excel saying “another user”. Actually Excel cannot tell who (the real human) is editing the file. Based on my research the No.1 possibility of the error is KB2626998.
2626998 Connection to a network document is lost in the 2007 Office system or in Office 2010 after the computer resumes from standby
http://support.microsoft.com/kb/2626998
For Excel 2010, follow these steps:
a. Click Start , click Run , type regedit in the Open box, and then click OK .
b. Locate and then select the following registry subkey: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Excel\Options
c. On the Edit menu, point to New , and then click Dword Value .
d. Type NetworkAvailableTimeInSeconds , and then press Enter.
e. Right-click NetworkAvailableTimeInSeconds , and then click Modify .
f. In the Value data box, click Decimal , type a number value, and then click OK .
Note This registry subkey sets the time, in seconds, that Excel waits for the network to resume. For example, if you type 15 for the number value, Excel waits 15 seconds for the network to resume. You might have to do some tests in your own environment to
determine an appropriate value. You may have to try multiple numbers.
g. Locate and then select the following registry subkey.
HKEY_CURRENT_USER\Software\Microsoft\office\14.0\common\Internet
h. Repeat step 2C through step 2F again. Reuse the same value that you used previously.
i. Exit Registry Editor.
Feel free to post back. Thanks.
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected] -
Item does not exist error when updating item
Hi,
I have a list called "Deal" and I have a ItemUpdated event to update the item permission based on a list field "Owner".
I find the code run well with site collection administrator account. If I use a regular user account to edit the item, it throws "Item does not exist" error after clicking save button. But the item is actually updated.
I run the code under debug mode and it does not throw any exception. But the page shows "Item doex not exist" error.
If I retract the solution, the item can be updated normally without any error.
My code and the error message:
public override void ItemUpdated(SPItemEventProperties properties)
if (properties.ListTitle.Equals("Deal"))
base.ItemUpdated(properties);
try
SPSecurity.RunWithElevatedPrivileges(delegate
using (SPSite elevatedSite = new SPSite(properties.SiteId))
using (SPWeb elevatedWeb = elevatedSite.OpenWeb())
SPList elevatedList = elevatedWeb.Lists[properties.ListId];
SPListItem elevatedListItem = elevatedList.Items.GetItemById(properties.ListItem.ID);
// Get Lead owner
SPFieldUserValue uValue = (SPFieldUserValue)elevatedListItem.Fields["Owner"].GetFieldValue(elevatedListItem["Owner"].ToString());
SPUser owner = uValue.User;
bool oldValue = elevatedWeb.AllowUnsafeUpdates;
elevatedWeb.AllowUnsafeUpdates = true;
elevatedListItem.ResetRoleInheritance();
// Break inheritance and clear permissions on list item
if (!properties.ListItem.HasUniqueRoleAssignments)
elevatedListItem.BreakRoleInheritance(false);
// Add permissions for current user
this.SetPermissionsForUser(elevatedWeb, elevatedListItem, owner, "LeadsOwnerPermission");
this.EventFiringEnabled = false;
elevatedListItem.SystemUpdate();
this.EventFiringEnabled = true;
elevatedWeb.AllowUnsafeUpdates = oldValue;
catch (Exception ex)
COMException (0x81020016): Item does not exist.
The page you selected contains an item that does not exist. It may have been deleted by another user.<nativehr>0x81020016</nativehr><nativestack></nativestack>]
Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView) +0
Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView) +256
[SPException: Item does not exist.
The page you selected contains an item that does not exist. It may have been deleted by another user.]
Microsoft.SharePoint.WebPartPages.DataFormWebPart.InsertCallback(Int32 affectedRecords, Exception ex) +24356360
System.Web.UI.DataSourceView.Insert(IDictionary values, DataSourceViewOperationCallback callback) +4064980
Microsoft.SharePoint.WebPartPages.DataFormWebPart.FlatCommit() +378
Microsoft.SharePoint.WebPartPages.DataFormWebPart.HandleOnSave(Object sender, EventArgs e) +24
Microsoft.SharePoint.WebControls.SaveButton.OnBubbleEvent(Object source, EventArgs e) +727
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +70
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +29
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2981Can you try removing user permissions iteratively.
The sample code will look like this.
//get usernames
string tempFieldValue = listItem["Assigned To"].ToString();
string[] userNameArray = listItem["Assigned To"].ToString().Split(';');
//remove permissions first
web.AllowUnsafeUpdates = true;
listItem.BreakRoleInheritance(false);
SPRoleAssignmentCollection raCollection = listItem.RoleAssignments;
//remove exisiting permissions one by one
for (int a = raCollection.Count - 1; a >= 0; a--)
raCollection.Remove(a);
for (int i = 1; i < userNameArray.Length; i++)
tempFieldValue = userNameArray[i].Replace("#", "");
userName = web.AllUsers[tempFieldValue];
toAddress = userName.Email;
SPSecurity.RunWithElevatedPrivileges(delegate()
//EMAIL USER
bool result = SPUtility.SendEmail(web, appendHtmlTag, htmlEncode, toAddress, subject, message);
//PERMISSIONS
//grant permissions for specific list item
SPRoleDefinition roleDefintion = web.RoleDefinitions.GetByType(SPRoleType.Contributor);
SPRoleAssignment roleAssignment = new SPRoleAssignment(userName);
roleAssignment.RoleDefinitionBindings.Add(roleDefintion);
listItem.RoleAssignments.Add(roleAssignment);
listItem.Update();
i++;
jaik -
HTTP Error 404 :File does not exist
Hi all,
On Test instance we are not able to open the help file,it give an error
HTTP Error 404 :File does not exist
can anybody have solution for this
it's very urgent
Thanks
shekharI have changed the note server definition in the external app to add the mail directory in front of the mail file name 'mail/mufile.nfs' and I get the following error:
05/04/21 15:15:07 lotusnotes: [instance=(null), id=97176201941,7] ERROR: LotusServiceSession: getConfigProperties(): An error occured
while reading/ retrieving the properties from the the configuration file.
05/04/21 15:15:07 lotusnotes: [instance=(null), id=97176201941,7] ERROR: Unhandled exception in SOAP call
oracle.portal.provider.v2.ProviderException: LotusServiceSession: getConfigProperties(): An error occured while reading/ retrieving the
properties from the the configuration file. -
Sales Order Error Message 'Product does not exist in system'
Hi Gurus,
we recently upgraded from CRM 4 to 7.0. There is a ECC attached (which was also upgraded from 4.7 to 6.0 before).
Scenario: materials are replicatd from ECC to CRM. All mandatory customizing objects were initially loaded succesfully.
Because of the upgrade we already have "old" products in CRM. We requested a single product from ECC, the bdoc went through with green. The product can be found via commpr01 and also on database in comm_product. But when try to add the product to an sales order e.g. quotation, it gives the error message "product does not exist in the system.
We then tried to delete that product using the report com_product_delete_single. When entered the selection criteria for that report, we used the f4-valuehelp to enter the product. We found the product and then executed the report. But gives the message 'product not found'.
We also created a product for testing purposes directly in crm, but it shows the same behaviour in sales orders and for the deletion report.
Please help me with that issue. Your help will be highly appreciated!!!
Kind regards
HannesSolved with the help of SAP.
Keywords: COM_PRODUCT
COM_PRODUCT_GUID_GET_INTERNAL
CONVERSION_EXIT_PRID1_INPUT
CRM_ORDERADM_I 501
Relevant notes:
Note 1449146 - Dump While Creation IP via WebUI
Note 1445079 - Unable to add products to contract
The notes do not exactly described our issue but the code corrections were still relevent for us. -
Error: Selected disk does not exist (21) Module-SRE-700
Already tried everything that the recovery cisco commands, anyone have idea how to solve the problem of the print shown in print?
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
or S to select Secondary Boot Loader ...
or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
ServicesEngine boot-loader> install_key waas-accelerator-4.4.5c.4-k9.bin
Keyfile Size 202814577 over limit 32768 will not burn into flash
ServicesEngine boot-loader> verify
Loading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
Unrecognized command
ServicesEngine boot-loader>
#service-module sm 1/0 session
Trying 172.20.245.1, 2067 ... Open
Please wait...
Please press P to select Primary Boot Loader ...
or S to select Secondary Boot Loader ...
or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Trying to reset Service Module SM1/0.
May 7 11:27:33.055: %SRE_SM-6-STATE_CHANGE: SM1/0 changing state from SERVICE_MODULE_STATE_ERRQ to SERVICE_MODULE_STATE_SHDN
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
or S to select Secondary Boot Loader ...
or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialize network device
Backup current platform configurations....
SRE step 1 - SM registration...
Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
Local install not supported
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait ................... done.
May 7 11:29:03.331: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
þ
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
or S to select Secondary Boot Loader ...
or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialize network device
Backup current platform configurations....
SRE step 1 - SM registration...
Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
Local install not supported
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait ................... done.
May 7 11:30:31.339: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
ú
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
or S to select Secondary Boot Loader ...
or wait to boot from default configuration ...Hi,
Opened a tac and managed to get the resolution of the problem. For those with the same problem reported by me above just follow the procedure below:
1. uninstall existing SRE-V software
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1055364
2. run sm-hw-util to set sata mode to IDE
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438
3. configure a static, 32bit route to point the service module IP address to the SM slot/0 interface
ip route 255.255.255.255 SM slot/0
4. install WAAS:
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v421/module/installation/guide/wssmcfg.html#wp47040
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438 -
Excise Invoice creation error -Billing document does not exists
Dear Experts,
I have created supplementary sales order, billing with refernece through sales order by VF01.
Now I want to create Excise Invoice but system gives error Billing Document does not exists
I have checked billing document in VBRK table & it is showing in table.
My item categroy is L2N -and set it to C
I have assigned Billing type under Outgoing excise invoice ->Assign billing type to delivery type still my excise invoice is not generating.
Pl. guide me.
Thanks
TruptiResolved my problem.
Actually in Billing item categroy if you put SD Doc. Catg. as M you can do excise invoice even if you have not created the
outbound delivery.
So cycle will be Supplementary Sales Order->VF01 with ref. to SO->J1IIN -Excise invoice creation.
Thanks to all.
Trupti. -
System Administrator does not Exist
Hi all, for Fresh Installation of 11.5.10.2, I have applied diagnostics patch for IZU_TOP.
I can login as SYSADMIN account, but can not see System Administrator Responsibility.
It shows Assigned in User Management module to SYSADMIN user. I tried to End Date and Assign again,and bounced Apache, but it does not show the responsibility after login.
While starting / stpooing of CM, it gives message :
'Please enter a valid responsibility. The responsibility System Administrator does not exist or is not active. Check that the correct applicaton short name is specified for your responsibility'.
Please help..
RohitThanks for your inputs, issue got resolution after below actionplan suggested in SR.
RESEARCH
=========
(Note: This is INTERNAL ONLY research. No action should be taken by the customer on this information.
This is research only, and may NOT be applicable to your specific situation.)
Note 335487.1 Patch 3480000 Error: Responsibility System Administrator
Does Not Exist
Note 309009.1 FND.H Patch 3262159 FNDLIBR fails with "Please enter a
valid responsibility" error
Note 316959.1
ACTION PLAN
============
As detailed in note 316959.1 please do the following:
SELECT *
FROM Fnd_Responsibility_vl
WHERE Application_Id = 1
AND Responsibility_Name = 'System Administrator'
AND Start_Date <= Sysdate
AND ( End_Date is NULL OR End_Date > Sysdate );
2.-
SELECT count(*)
FROM Fnd_User_Resp_Groups;
3.- Back up the wf_role_hierarchies table into a new table you create.
Delete the entries in that table (2 rows exist)
Run affurgol.sql FORCE
Then replace those entries back into wf_role_hierarchies table
The steps to execute are:
3.a.
SQL> CREATE TABLE wf_role_hierarchies_copy AS
SELECT * FROM wf_role_hierarchies;
3.b.
SQL> TRUNCATE TABLE applsys.wf_role_hierarchies;
3.c.
SQL> @affurgol.sql FORCE
3.d.
SQL> INSERT INTO wf_role_hierarchies
SELECT * FROM wf_role_hierarchies_copy;
4.- Provide the output of the following SQL statement at this point:
SELECT count(*)
FROM Fnd_User_Resp_Groups; -
Error "Function G1 does not exist "
Hi ,
While doing monitoring got error " Function G1 does not exist ".
Bdoc type : BUPA_REL
Sate : E04.
Checked SMQ1,SMQ2 , no queues were in sysfail status.How to maintain this function.
Help me how to clear .
Thanks in advance, Regards,
PA.Hi ,
May be your customization settings was not replicated correctly.
In R/3 you have Contact person function G1 and it doesn't exist in CRM.
You can check it : go to BP trn => open an organisation that has contact person =>relationship tab => double click on contact person => In "Contact person data "frame you will see field "function" => press F4 and check existing values.
Those values should be same as in R/3 system.If not - check your customization objects synchronization.
Hope, it's help
Rika -
IDoc message Document or line item does not exist for invoice reference
Hello,
We activated IDoc message type FIDCC2. When cancelling documents which were created before the activation date the cancellation documents aren't posted in the receiving system. Message 'Document or line item does not exist for invoice reference' appears. How can I process these items (the reference document can't exist in the receiving system so the only option is to remove it from the IDoc?)?
Regards, JanThis is just a guide. Adapt it to your situation. I get this kind of error message where in the case, someone has marked for deletion a line item in the purchase order. In this regard, the IDoc errors out because the line item number being referenced is marked for deletion.
You can either delete the IDoc or have the deletion flag taken off the line item number in the PO or document number to enable you reprocess the IDoc number in question.
Elias -
Source system ECQCLNT320 does not exist in BI Production
Hi,
When i am transporting the BI objects along with the datasources it is giving the following error.
our system Landscape:
BI Dev. & BI Qty Same Box
ECC Dev.
ECC Qty
ECC Prd.
in our landscape BI dev and BI Quality are the same Box, i am transporting BI cube objects along with ECC quality system datasources from BI dev. system. But when we import the cube request the following error is occuring.
Please help me as i am in typical stage.
ERROR: Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Activation Mode)
Source system ECQCLNT320 does not exist
Can we transport the ECQ datasources from BI dev system where i am using them.
Thanks,
BaswaHi,
RC on ECQCLNT320 check the source connection under sourcesystem tab in Rsa1,it might having issue else
Check in the RSA6 (Sourcesystem) wether DataSource is active mode or not ,
Go to Tcode RSDS for Replication of DataSource in BW system .
Regards,
Satya -
Short dump with error FORM "CLEAR_SPECIAL_TABLES" does not exist"
Hi All,
We are experiencing an issue in our development system. We have recently upgraded to ECC6 from ECC5. While executing FBL3N transaction, we are getting a dump with description Syntax error in program "RFEPOS00 ".
The following syntax error occurred in program "RFEPOS00 " in include "RFPOSFZ0 "
line 1072:
"FORM "CLEAR_SPECIAL_TABLES" does not exist"
I checked in our previous systems, the subroutine CLEAR_SPECIAL_TABLES exists with an empty body in include RFPOSFC1.
And it is created by DDIC.
As per the comments in the include RFPOSFC1, we tried to generate the program RFXPRA33. But it is giving same error FORM "CLEAR_SPECIAL_TABLES" does not exist" .
Any help to resolving this issue will be appreciatable.
Thanks in advance.
Edited by: Kumar.ktk on Jun 8, 2010 1:36 PMHi,
We just had this issue after an upgrade and the solution was to compare the coding with an unupgraded system,
there we found that this missing form exists in an include with this documentation:
Function LINE_ITEMS_SPECIAL_FIELDS
caller L0F14I01, AFTER_SAVE_T021S, tcode O7R3
In case of errors: Start RFXPRA33
FORM CLEAR_SPECIAL_TABLES.
ENDFORM.
After we executed program: RFXPRA33 all errors were resolved,
Hope this helps,
Mickey
Maybe you are looking for
-
Icloud doesn't work between my iPad 2 and iPhone 4. And when I try to iMessage from my iphone 4 it doesn't send. I need to send it as a regular text message. Any ideas why they won't sync and iMessage won't send?
-
Two computers, one vault
I am fairly new to using Aperture. I have read quite a few of the how-to's about the vault feature. So, I recently got myself an external drive and told Aperture to set up a vault on it. Here are some questions which I am not quite sure about: 1) whe
-
HT1229 I cannot import pictures from iPhoto to Powerpoint
I am unable to import pictures from iPhoto to Powerpoint 2011 :Need hekp; Using Mavericks and updated Microsoft powerpoint also... Need urgent help.. Thank you
-
SQL2025N error in db2 backup to SAMBA filesystem
Hi, we have mounted an external disk in our linux system using SAMBA. The db2 backup offline fails with this error message: ERRORMESSAGE: Error -2025 in dmdb6bkp.c(1498): SQL2025N An I/O error "4" occurred on media "/BACKUP/APPS/HP2.0.db2hp2.NODE000
-
Upsampling from Aperture?
How can you upsample from Aperture to Photoshop when using as an external editor? I primarily used to open RAW files directly into PS and could upsample there. How can I do this from Aperture, if at all possible? I know in the export menu in the pref