Error "The propertyArray section contains a duplicate entry.."

Hello,
I'm trying to load a flat file into EPMA, but the system give me back the error:
"The propertyArray section contains a duplicate entry;..."
I correctly set the property IsPrimary...
The error is only about shared elements.
Could someone help me?
Thanks
Maurizio
PS: I'm working on version 11.1.2 Planning

Hi Jasmine and thank you for your answer...
yes, I set the same alias for the primary member and for the shared member in the hierarchy section. I tried before, in other applications, to load metadata with shared members sharing the same alias with the primary member and it worked. Maybe this time i have made a mistake with the ADS file but i'm not able to find it out.
The application is managed with Shared Library.When i load metadata in Shared Library, EPMA returns warnings, not error.
Am i wrong or it is possibile to load shared member via ADS file with duplicated alias?
I think these warnings don't allow me to deploy the application correctly.
Thank you very much for your help.
Maurizio

Similar Messages

T77RCF_SMASK table entries: Error - Customizing table T77RCF_SMASK contains no corresponding entry for SMASK_ID = 0071

Team,
Table T77RCF_SMASK has reference to T77RCF_SMG_ASM.
When compared the two tables we found that following entries are missing in T77RCF_SMASK:
71
72
73
74
75
78
92
95
96
Can you please guide on what should be the entry for these in table T77RCF_SMASK? Would appreciate if full table entries are shown in answer for future users.
Missing entries are causing error "Customizing table T77RCF_SMASK contains no corresponding entry for SMASK_ID = 0071 and so on in SLG1 logs display.
Regards
Yash

The table enteries should be as attached
Regards
Khalid

Crystal Report error - "the group section cannot be printed..."

Hello to everyone.
I have a CR report based on a database view.
Everything is ok when i run the report in the CR designer but choosing the option to preview the report or run it from the SAP Business One (8.81 PL 08) i get an error:
"the group section cannot be printed because its condition field is nonexistent or invalid. Format the section to choose another condition field. Error in file "the Report name".rpt. Invalid group condition".
i must say that this happens in all my reports where i have group data. Also i must say that all those reports were ok some days before...
Is there a way for me to know what field is it refering to?
I have verified the DB and it is pointing correctly and the also the View returns data.
Thanks in advance

Hello Gordon,
thanks for your response. the reports were working fine until 8.81 PL05
We have upgraded the customer from PL05 - > PL08 a week ago.
Do you think that maybe this is the problem?
Thanks in advance

Override the storage section check for manual entries

Hi All,
I am facing a issue on Storage section search.While creating To system is giving correct Storage section according t the settings but if I would like to change the storage section to different storage section system is not giving any error message.It is giving only warning message check your enteries.
So I would like know is there is config settings to avoid another storage section selcetion which are not assignned storage search indicator.
I have checked in help.sap.com .I following information .
To set up the strategy for storage sections, see the section on activating storage section searches under Strategies in the Warehouse Management IMG documentation.
If storage section checking is active for the storage type, then the system searches in the storage type only for those empty storage bins in storage sections that have been allowed for the material being put away. When you are creating a transfer order and manually enter a storage bin, then the system checks whether the bin is in a storage section that is allowed for the material.
*You can also make an entry in customizing that permits you to override the section check for manual entries.*_
Can please advice me inorder activate the config for override the section check for manual entries or any warning message.
Thanks & regards,
Srikanth

HI,
Thanks for your reply.
I want Error message.
Regards,
Srikanth P

What are the tables that Contains DTP Filter Entries

Hello,
for the filter entries on a DTP Process I found the table RSBKSELECT "Selections for DTP Request (Summary)". But that holds only value which are done generic by Formula etc. but not the information which are entered manual.
Does anybody knows the table for the rest of entries ??
I need this Information to Report these Filter as Selectioncriteria.
Thank for any help
Henning

Hi,
Please note that I was able to link the tables by this kind of code:
"Get the request from the cube, to identify them.
    CALL FUNCTION 'RSSM_ICUBE_REQUESTS_GET'
      EXPORTING
        i_infocube     = LV_IC
      IMPORTING
        e_t_request    = LT_REQUEST
      EXCEPTIONS
        wrong_infocube = 1
        internal_error = 2
        others         = 3.
"Check each request
    LOOP AT LT_REQUEST INTO LS_REQUEST.
      "Populate LV_REQUID_CHAR to be able to read the table RSBKSELECT
      "The key is : Request id, without leading 0, right justified, and shifted one time to the left.
      LV_REQUID_CHAR = LS_REQUEST-PARTNR.
      SHIFT LV_REQUID_CHAR LEFT DELETING LEADING '0'.
      SHIFT LV_REQUID_CHAR RIGHT DELETING TRAILING SPACE.
      SHIFT LV_REQUID_CHAR LEFT.
      "Get the filters
      SELECT *
        INTO TABLE LT_RSBKSELECT
        FROM RSBKSELECT
        WHERE REQUID = LV_REQUID_CHAR.
ENDLOOP.
The internal table LT_RSBKSELECT will now contains all the filters used by the DTP.
It is way better than using the field that contains the concatenation of all filters since it is limited to 255 characters.
Hope it helps.

ERROR: The Service Component Container is not running: Standalone Workflow

We're trying to get the java notification mailer established through the OEM 10g Application Server Control. But the mail agent listener servlet container (WFALSNRSVC), and the mailer service servlet container (WFMLRSVC) are not running. Because of that, I cannot get any other parts of the mail configuration running. Note, I can successfully complete getting through the 8 steps of the "Workflow Notification Mailer" configuration (e.g. IMAP and SMTP mail accounts work fine and are accessible from the Workflow application server). What's the trick to getting the servlet containers running?? All I find in Oracle documentation is that these must be running before you can do anything, but I don't find anything on troubleshooting when they are not running.
Thanks.

Hi,
I'm having the same problem as you did.
I've tried pushing the button Go in the Oracle Workflow Manager - Service Components.
And it showed
An error has occurred!
The Service Component Container is not running.
Should I uninstall my Oracle Workflow?
And install a new installation of Oracle Workflow?
What does it mean by the "wfinstall"?
Is it the Oracle Workflow Configuration Assistant? which I can access using the wfinstall.bat.
Or should I replay the Oracle Workflow Configuration Assistant (wfinstall.bat) and choose Upgrade option?
Or should I uninstall all of my Oracle installation and start installing from the beginning?
BTW, what if I don't use (or have) OID?
Is it required?
Any clue would be grateful.
Thanks.
Buntoro

Error : The input field contains prohibited characters (already deleted)

Hi,
While trying to generate depreciation (Tcode AFAB), after select the Time of Print (either spool or immediate printing) this error will be displayed - "The input field contains prohibited characters (already deleted)", no error number displayed and the character ### appear in Time of Print. I m not using any special characters and i was able to generate it before. Also the test run is successful.
Please guide why this error is appear and what is the resolution for it.
Thank you,
Amalina

Hi Amalina,
Please see note 382285 solution part.
Regards Bernhard

Event ID 1008 The Open Procedure for service "BITS" in DLL "C:\Windows\System32\bitsperf.dll" failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.

I keep getting the above error on all my SQL 2012 deployments (standard and enterprise) on all Windows Server 2012 Standard machines. I have already tried the following commands in administrator mode to resolve without success:
lodctr bitsperf.dll
lodctr /R
Any other suggestions?
Diane

Hi Diane Sithoo,
You post the same question 2 times. Please avoid this practice on Forum, I
have merged the same thread. Thanks for your understanding.
According to your description, we need to verify when the error occurs, and if when the error happen, your SQL Server does not work, right ? If yes, we need to you help us to collect the detailed error log in SQL Server management Studio (SSMS). Please refer
to the following steps for collecting the error log.
In SSMS, expand Management, and SQL Server Logs, then
right-click a log and click View SQL Server Log.
If the SQL Server can run well, there are some error on Windows Server service, I recommend you post the question on the Windows Server General Forum(http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winservergen
) , It is appropriate and more experts will assist you.
In addition, about Event ID 1008, you may need to reload the
performance library when it is not properly initialized during installation. Then you can use Windows Reliability and Performance Monitor to verify that performance counters are properly collected and displayed in a Performance Monitor graph. For
more information, you can review the following article.
http://technet.microsoft.com/en-us/library/cc774913(v=ws.10).aspx
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

What does the "other" section contain on my hard drive?

It is taking up 155 gigs on my hard drive.

Same website, different page than what leroydouglas provided, should complete the picture.
http://pondini.org/OSX/LionStorage.html
Ciao.

Insert - Ignore Duplicate Entry Error

Hello
I would like to use an insert statement which also contains a select statement in it and returns a set of records and gets inserted in to a particular table.
But, when I tried to run the sql, it throws error as some of the records are duplicate entry insertions. Is it possible to modify the sql to ignore any duplicate entries and insert the new ones.
Illustration:
TABLE_A
STUDENT_ID GROUP_ID
101 200
101 201
103 200
107 201
and so on.
Here, when I try to insert a set of records like
101 200
108 200
101 300
103 200
103 201
I would like the exact duplicate entries like (101,200), (103,200) to be ignored with out producing any error but insert the other records in to the TABLE_A table.
Thr sql used is similar to this
Insert into TABLE_A (student_id, group_id)
select distinct person.studentid, groups.groupid from person, groups where
Did any one know how to handle this?
Thanks
Shiv

If I include 'NOT EXISTS' after insert and before
select statement, it throws the error
missing VALUES keyword
The NOT EXISTS goes in the WHERE clause.
Insert into Table_A (student_id, group_id)
select distinct p.studentid, g.groupid
from person p, group g
where NOT EXISTS (select 1
                 from table_A a
                 where a.student_id = p.studentid
                 and a.group_id = g.groupid)or you could do
Insert into Table_A (student_id, group_id)
select distinct p.studentid, g.groupid
from person p, group g
MINUS
select student_id, group_id
from Table_A

The requested page contains stale data Error

Hi All,
I have two table in the back end. VikCountry(country_code PK,country_name).
VikCities(country_code FK,city_name).I have created two EO's and TWo VO's for them and the AssociationObject.
In the UI ,I have two messageTextInput fields, one for the country code and one for the country name,And a Advance table having a "Add Another Row" button at footer level.In UI i want to enter the data i.e Country Code,Name and Cities for that country(Master Detail Relation ship)
Following is the code that i have written in the CO file:-
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
RnDAMImpl AM = (RnDAMImpl)pageContext.getApplicationModule(webBean);
if(!AM.getVikCountryVO1().isPreparedForExecution())
AM.getVikCountryVO1().executeQuery();
Row row1 = AM.getVikCountryVO1().createRow();
AM.getVikCountryVO1().insertRow(row1);
row1.setNewRowState(Row.STATUS_INITIALIZED);
if(!AM.getVikCitiesVO1().isPreparedForExecution())
AM.getVikCitiesVO1().executeQuery();
Row row2 = AM.getVikCitiesVO1().createRow();
AM.getVikCitiesVO1().insertRow(row2);
row2.setNewRowState(Row.STATUS_INITIALIZED);
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
RnDAMImpl AM = (RnDAMImpl)pageContext.getApplicationModule(webBean);
if(pageContext.getParameter("Submit")!=null)
AM.getOADBTransaction().commit();
else if(pageContext.getParameter("Cancle")!=null)
if(AM.getTransaction().isDirty())
AM.getOADBTransaction().rollback();
else if(pageContext.getParameter(EVENT_PARAM).equals("addRows"))
System.out.println("inside the addrows");
Row row2 = AM.getVikCitiesVO1().createRow();
AM.getVikCitiesVO1().insertRow(row2);
row2.setNewRowState(Row.STATUS_INITIALIZED);
Now when i am entering the data in the UI and press submit button,then It is giving me an error:-
The requested page contains stale data. This error could have been caused through the use of the browser's navigation buttons (the browser Back button, for example). If the browser's navigation buttons were not used, this error could have been caused by coding mistakes in application code. Please check Supporting the Browser Back Button developer guide - View Object Primary Key Comparison section to review the primary causes of this error and correct the coding mistakes.
Cause:
The number of displayed records, 1, exceeds the actual number of records, 0, in view object RnDAM.VikCitiesVO1. Some of the displayed records may have been deleted..
I am unable to solve this Problem.Please Help.
Thanks,
Vikram

Q:Why are you creating new Rows for Country and City VO in processRequest ?
A:Bcoz to insert the empty rows in the VO cache.
Q:And then again in processFormRequest you are creating another row for the Cities VO.
A:As i set the Insert Row Automatically property to false, when user select the "Add Another Row" button in UI, i am inserting an empty row in the VO cache.
If there is anything wrong plz let me know.
Q:When does error happen when you try to add another row or when you try to commit the transaction ?
A:When i am commiting and if i fill the data in the textboxes and table, and press Add Another Row Button in table.

Error: Enum: Enumeration has duplicate entries

I keep getting an error that says:
'Enum: Enumeration has duplicate entries' which results in a blue controller on my front panel that says 'general' on it. I can't delete or right click on it since it disappears if I do, so I can't find on my diagram; and I don't actually have any enumerated data types in my code. Any one have any idea...please let me know...thanks!

I agree with Dennis that we may need your code to help solve the issue, but I wanted to mention that you could get this error if you are using a tab control and the pages have the same name.
Evan
National Instruments

Middleware Settings - Duplicate entries in the Table TCURC

Hi Experts,
I am doing middleware settings for integrating SAP CRM 5.0 with SAP R/3 4.7.
Before replicating the customizing objects, i found duplicate entries for ISO Codes in the table TCURC (Field name-ISOCD).
Following are those entries
MANDT     WAERS     ISOCD     ALTWR     GDATU     XPRIMARY     LTEXT     KTEXT
949     CFP       XPF       953       00.00.0000          French Franc (Pacific Islands)     Fr. Frank (Pac)
949     CNY       CNY       156       00.00.0000     X     Chinese Renminbi     Renminbi
949     DEM       DEM       280       00.00.0000     X     German Mark     German Mark
949     DEM3      DEM       280       00.00.0000          (Internal) German Mark (3 dec.places)     (Int.) DEM 3 DP
949     RMB       CNY       156       00.00.0000          Chinese Yuan Renminbi     Yuan Renminbi
949     USD       USD       840       00.00.0000     X     United States Dollar     US Dollar
949     USDN      USD       840       00.00.0000          (Internal) United States Dollar (5 Dec.)     US Dollar
949     XPF       XPF       953       00.00.0000     X     CFP Franc     Franc
Duplicate entries are in the third column.
Please kindly let me know what is the impact and what should i do now.
Points will be rewarded for the helpful answers.
Thanks in advance
Nadh.R

Hi Murali,
Thanks for your reply.
But i didnt find anything related to the issue in that note.
Do you have any other solution.
Thanks
Nadh.

The "Measures" dimension contains more than one hierarchy... Collation issue

It appears that an Excel query pased through to SSAS has a "measures" with lowercase "m" when analysis services expects an uppercase "M" so it should look like "Measures". Is there a fix in excel to allow
the correct passing of "Measures" member name to the cube?
BTW, I have NO Calculations in the cube.
In excel 2013 when I pivot with a pivot table connected to a case sensitive collation (non default config)
cube and perform a filter by "Keep only Selected Items" I get the error "The 'Measures' dimension contains more than one hierarchy, therefore the hierarchy must be explicity specified".
When I revert back to server wide setting to case insensitive, and I preform the exact same pivoting function it works without error. The problem appears to be that excel does not understand the server collation setting.
When I run SQL Server Profilier I narrowed down the MDX statement run in Excel that gives me an error to this:
with
member measures.__XlItemPath as
Generate(
Ascendants([Employee].[Location Code].currentmember),
[Employee].[Location Code].currentmember.unique_name,
"|__XLPATHSEP__|"
member measures.__XlSiblingCount as
Generate(
Ascendants([Employee].[Location Code].currentmember),
AddCalculatedMembers([Employee].[Location Code].currentmember.siblings).count,
"|__XLPATHSEP__|"
member measures.__XlChildCount as
AddCalculatedMembers([Employee].[Location Code].currentmember.children).count
select { measures.__XlItemPath, measures.__XlSiblingCount, measures.__XlChildCount } on columns,
[Employee].[Location Code].&[01W]
dimension properties MEMBER_TYPE
on rows
from [Metrics]
cell properties value
Playing around with the query I discovered that if I capitalize the first letter of the "with measures" member, the statement works.
with
member Measures.__XlItemPath as
Generate(
Ascendants([Employee].[Location Code].currentmember),
[Employee].[Location Code].currentmember.unique_name,
"|__XLPATHSEP__|"
member Measures.__XlSiblingCount as
Generate(
Ascendants([Employee].[Location Code].currentmember),
AddCalculatedMembers([Employee].[Location Code].currentmember.siblings).count,
"|__XLPATHSEP__|"
member Measures.__XlChildCount as
AddCalculatedMembers([Employee].[Location Code].currentmember.children).count
select { measures.__XlItemPath, measures.__XlSiblingCount, measures.__XlChildCount } on columns,
[Employee].[Location Code].&[01W]
dimension properties MEMBER_TYPE
on rows
from [Metrics]
cell properties value
Also, I realise that I could change the collation on just the cube itself to case insenstive to get this to work, but I really don't want to do an impact analysis of running a mixed collation environment.
So, my question is: Is there an excel fix that will allow me to run a case sensitve cube and allow me to click on filter and filter by "keep only selected items" or "Hide selected Items"? All other filtering works, it's only those two
filtering options error for me.
Here are the versions I'm working with:
Excel 2013 (15.0.4535.1507) MSO(15.0.4551.1007) 32-bit Part of Microsoft Office Professional Plus 2013
Microsoft Analysis Server Enterprise 2012 11.0.3000.0
Any help would be appreciated. Thank you in advance!

Hi, i assume this logic is for Dimension formula?
If you have multiple hierarchy like ParentH1 and ParentH2 you should use FormulaH1 and FormulaH2 and not FORMULA column.
in FORMULAH1
[Account.H1].[Account_A] / [Account.H1].[Account_B]

The backup file contains unrecognized data and cannot be used

I am trying to restore files from an NT back up on a SBS 2003. The backup was taken on this machine and trying to restore to the same. I get this error: The backup file contains unrecognized data and cannot be used.
I tried copying it to a different machine with no luck. Any suggestions?
Robert

Hi,
Since the backup file cannot be restored on a different machine, the backup file could be corrupt. You need to use some third party recovery utilities to restore the backup file.
For more detailed information, please refer to the article below:
Windows NTBackup restore troubleshooting tips
http://searchdatabackup.techtarget.com/tip/Windows-NTBackup-restore-troubleshooting-tips
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error "The propertyArray section contains a duplicate entry.."

Similar Messages

Maybe you are looking for