Error: there are non exicisable item with cenvat tax code
I am getting an error message there are non exicisable item with cenvat tax code while trying to add po for pick and pack from sales order. I request all of you to help me with it.
I have already checked if the item and ware house is exicisable in the check box of the master data.
Best regards,
Sandesh.Sreyamsh
Thanks mahendra and rahul,
Unfortunately my issue is not solved yet, the tax is not manually created it was created by sap during new company creation. I checked by adding other tax type in sales order but every time when I try to create sales bom it gives the above error.
@ Rahul the tax is under cenvat type and the Items has been added under exercise transaction. here is what im trying to do
I created a sales order for 4 of my items.
Then i try to create po for two of my as pick and pack items by checking Purchase orders indicator under logistics tab of sales order.
At this point i am getting the above said error.
All the items i am trying to add is exisable and tax is also of cenvat type.
Please help me out of this as im stuch very badly in this issue.
Regards,
Sandesh.Sreyamsh
Similar Messages
-
Unbalanced Transaction with Cenvat Tax Code
Hi All
I have a problem with A/R Down Payment Invoice.When i am trying to add the invoice with Cenvat related Tax code ( BED+VAT)the system is throwing an error which reads as follows:
" Unbalanced Transaction Message 131-91"
But when i am changing the tax code and selecting only Vat Code The A/R Downpayment Invoice is added succesfully.
Can anybody please throw some light on it what is the problem.
Can we use cenvat related Tax Code with A/R Downpayment Invoice or not..?
need your help
warm regards
anandHi Jeyakanthan
Thanks for the reply.Actually our client has a requirement.They do big projects of construction
as a result they receive payment in phases.The payment terms is like
1) 10% advance on receipt of order
2) Raise Invoice for 30% on approval of drawings + 100% taxes & Duties (Cenvat)+ freight
3) Raise Invoice for 40% after Initial inspection
4)Raise Invoice for 20% after final inspection.
Note: Payment terms differ with every order.
For this scenario i think A/R downpayment is ideal.Now when invoice is raised for 30% we are required to show 100% taxes and duties(Cenvat) in the A/R downpayment invoice.How to achieve this.
I have to make an invoice (Print layout report) where i have to show
Total Sales 100%
Claim Value 30% + 100% Taxex and Duties + freight
Retention Money 70% i.e Due from Customer
Your view on this would be of great help..Any alternate method to achieve this.
waiting for your reply.
warm regards
anand -
I have a new iPhone 6 plus and all is OK. But the mail shows more than 400 'unread' messages whereas there are none in the mailbox or trash or anywhere else I have looked. I can send and receive with no problem. I'm sure I have no unread messages.
jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport -
When I sync my phone with my macbook pro, there are "3,307 items that could not be synced". What do I do?
What you should do is figure out why no songs will sync:
Is there an Apple ID problem? That's the most likely reason. Maybe you haven't signed in to your Apple ID on iTunes. Maybe the Apple ID on your computer differs from that on your iPhone.
Have you been syncing your iPhone to some other computer? It only syncs to one computer.
Are you using the latest iTunes? The current version is 11.0.5. -
I am trying to download Tap Tap Revenge on my new Ipad air..however..i searched for it in the App Store but there are none...help please..i really love this game! Is there something wrong with my App Store or my ipad??
It looks like the app is not currently in the App Store, I can't find it in the UK nor US stores.
If you had previously downloaded it then do you have a copy on your computer's iTunes so that you can sync it to your iPad ? -
Im about to buy a macbook pro. but I dont know if there are too much techproblems with the retina model,such as overheating, malfunction of the fans, screen problems?. or is the macbook pro non retina in tech problems a better option? thanxa lot
I have a brand new rMBP and have not seen any of those problems.
-
WF error: There are no workflows that have already worked with this object
Hello all,
I am getting the error "There are no workflows that have already worked with this object" when I go to IQS23--> enter notification number --> workflow overview. I tried to find information related to this error message but could not find anything. If anyone happen to know anything about this error, please let me know.
Thanks.
MithunHello,
As the error message says, it can't find any workflows that have dealt with the instance of the object you're inquiring about.
If you know this isn't true, or if you don't know what object this concerns, the you could try debug to see which object is being searched for.
regards
Rick Bakker
Hanabi Technology -
I have a simple column chart grouping on 1 value on the category axis. For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis. I right click on the data series and choose "Add calculated series...". I choose moving average. I want to move the average over at least 2 periods.
When I run the report, I get the error "Formula error - there are not enough data points for the period". The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5). When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
I don't think this is entirely acceptable for our end users. At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart. Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
Thank you,
DanI was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
<ChartFormulaParameter Name="Period">
<Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
</ChartFormulaParameter>
What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
A side note:
If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML. -
Error::There is a billing problem with your previous purchase please check your billing information
Ask for assistance:
Contact Apple Support
https://getsupport.apple.com/GetproductgroupList.action -
Account Statement showing that there are no open items. Just Zero
Dear friends,
My customer wants the report with showing that there are no open items. Just Zero balance on 13/08/2009 for the Tax purposes. But there are no line items done on this date.
I am trying to generate statement in F.27 but it does not give statement on date wise though I select the option (0)Open Item Statement - Daily in Customer Master data in Correspondence.
Please suggest how to get on 13/08/2009 though there is no balance/open items.
Thanks,
Venkata RajuHi
It may not be possible with the standard reports. The alternative way is to filter FBL5N based on date range (Posting Date Range). However, the same would work only if all the open items have been cleared in the system before your key date.Morever, your customer has to accept the SAP Format. Alternatively, you can look at the option of using balance confirmation Forms and Programs or do the procedure outside system after confirming the data from SAP by properly authorized person.
Regards
Sanil Bhandari -
I upgraded to Mountain Lion yesterday, but since doing so I find that my 1Password app will not work. I have checked for 1Password updates but there are none. Is there a compatibility issue
Hmmm...I'm using 1Password Version 3.8.20 (build 31499) with a fresh install (scrape and pave) of Mt. Lion on my iMac and it's working fine.
I use Dropbox to sync 1Password so for my fresh install I simply downloaded 1Password from Agilbits website and installed it.
Have you tried reinstalling 1Password? Depending on how you purchased it, download it from their website or from the Mac App store to reinstall/replace it. (IIRC v3.8.x comes directly from Agilbits and v3.9 from the Mac App store.) You shouldn't have to uninstall it, the new download should overwrite the existing copy.
As with anything else, be sure to run a backup first!
More here:
http://support.agilebits.com/discussions/1password-38-for-mac-from-agilebits-web site/17861-finding-existing-data-file-when-reinstalling-1password
http://support.agilebits.com/discussions/1password-in-mac-app-store/3377-how-to- reinstall
http://support.agilebits.com/discussions/1password-38-for-mac-from-agilebits-web site/13769-reinstall
http://support.agilebits.com/discussions/1password-in-mac-app-store/2394-reinsta lling-1-password
Hope that helps.
D'oh! Mende1 beat me to it! -
Wheni am tried to settle order i got error There are no accrued amounts; s
Wheni am tried to settle order i got error There are no accrued amounts; settlement is not possible.
Hi Guru,
Details of production order
Target quantity =1,063,893 Delivered quantity =1,063,893 confirmed quantity = 1,074,945 EA Basic start =07.04.2009 Basic finish =01.11.2010 TECO PCNF DLV PRC GMPS MANC RESA SETC*
When i am trying to close order system gives Error messsage
000 Unprocessed future change recs for order SS50008TT/1A prevent del. fl
000 Order SS50008TT/1A is partially confirmed
Unprocessed future change recs for order SS50008TT/1A prevent del.
flag/completion
Message no. CO688
Diagnosis
There are still future change records or error records to be process
from the confirmation for the confirmation processes in order
SS50008TT/1A. Possible confirmation processes are:
o Automatic goods receipt
o Backflushing
o Calculation of actual costs
o Data transfer to HR
System Response
You are not meant to set the deletion flag/'completed' status
with future change records that have not been processed.
edure
You should process the open future change records using
o Predefined confimration process or
o The CORUPROC program, by dispatching it in Customizing in
background job (dispatch background jobs: dispatching proc
Check if incorrect goods movements or incorrect actual cost ca
exist for the order, and reprocess these if necessary:
o Reprocessing incorrect goods movements
o Reprocessing incorrect actual cost calculations -
Query 0: Runtime error There is already a line with the same key. with para
Dear all,
I have a query with several variables. One of the variables is Version. When I use certain values e.g. 1,2 or 3, I can generate the query without any problem. However, when I use the other values e,g, 4, 5, or 6, the query gives me with the following error messages :
1. Query 0: Runtime error There is already a line with the same key. with parallel processing via RFC
2. Error while reading data; navigation is possible
3. >> Row: 174 Inc: LRSDRPU02 Prog: SAPLRSDRP
Error 1
Query 0: Runtime error There is already a line with the same key. with parallel processing via RFC
Message no. DBMAN428
Error 2
Error while reading data; navigation is possible
Message no. BRAIN289
Diagnosis
An error occurred while reading the data. The query result is therefore empty or inconsistent and is not buffered in the OLAP cache.
Procedure
You can continue to navigate or return to the last navigation step.
Error 3
>> Row: 174 Inc: LRSDRPU02 Prog: SAPLRSDRP
Message no. RS_EXCEPTION301
Diagnosis
En error has been triggered. This message specifies where in the coding the error occurred. This helps you to localize the error quickly.
May I know what causes this error and how to troubleshoot it?
Thank you.Venkat,
You are either a genius or working for SAP.
In any case, your solution solved my problem.
Thanks heaps! -
I am running 10.6.8 and using iweb for my web site. After several SEO analysis they all indicate I need H1-6 header tags. After looking at the source code I see there are none in iweb. Are they necessary to add? Why would one add these tags and how do I add H Tags to iweb? And are there examples to look at? I am slowly learning about simple web design and assumed that iweb was stand alone without having to write code. Is this one of the reasons iweb is no longer supported? Thanks for looking at this!
A simple text page like this:
Heading
sub heading
text paragraph ....
Is traditionally represented by html tags like:
<h1>Heading</h1>
<h2>sub heading</h2>
<p>text paragraph ... </p>
I would guess that the use of h1-h6 tags helps search engines to understand the structure of a page as the tags imply a certain structure.
This can be compared to more generic tags like <div> that could represent any kind of content - and may be what iWeb uses (you'll have to check yourself).
I would generally recommend that you use some kind of up to date blog/site building tool, perhaps Wordpress or Squarespace (I haven't used either one myself) that support current web technologies - this should reduce your SEO issues and make it easier to properly support mobile/tablet users. -
Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?
Thanks Kelly,
The answers would be the following:
1200 cells per custom section (NEW COUNT), and up to 30 custom sections per spec.
Assuming all will be populated, and this would apply to all final material specs in the system which could be ~25% of all material specs.
The cells will be numeric, free text, drop downs, and some calculated numeric.
Are we reaching the limits for UI performance?
Thanks
Maybe you are looking for
-
What is difference between air play and home sharing when wanting to show photos on HD tv through apple tv? Just bought Mac book air and apple tv.
-
TS4036 my phone needs to be unlocked
My phone is locked due to wrong password n I want to reset it
-
Interest splitting method and self withholding tax......
hi all, please let me know the concept for interest splitting method with examples and also self withholding tax. thanks in advance
-
Enterprise Portal Business Objects and usage in VC
Dear all, environment : Enterprise Portal / mySAP ERP 2005 / Visual Composer. I would like to use e.g. List Order Fulfilment ( a BO in the pcd) PCD location : pcd:Business_Objects/com.sap.pct.erp.common Object type : com.sapportals.portal.businessobj
-
Mail Sending but NOT RECEIVING! Mail 3.6 Macbook 2009 OSX Leopard
Hey All! I have been having huge issues with my Mail Server for the past week and a bit now which is hard because I work from home. My Rogers Yahoo email account can no longer send emails from my Mail app on my computer. I know it is not rogers thems