Query 0: Runtime error There is already a line with the same key. with para

Dear all,
I have a query with several variables. One of the variables is Version. When I use certain values e.g. 1,2 or 3, I can generate the query without any problem. However, when I use the other values e,g, 4, 5, or 6, the query gives me with the following error messages :
1. Query 0: Runtime error There is already a line with the same key. with parallel processing via RFC
2. Error while reading data; navigation is possible
3. >> Row: 174 Inc: LRSDRPU02 Prog: SAPLRSDRP
Error 1
Query 0: Runtime error There is already a line with the same key. with parallel processing via RFC
Message no. DBMAN428
Error 2
Error while reading data; navigation is possible
Message no. BRAIN289
Diagnosis
An error occurred while reading the data. The query result is therefore empty or inconsistent and is not buffered in the OLAP cache.
Procedure
You can continue to navigate or return to the last navigation step.
Error 3
>> Row: 174 Inc: LRSDRPU02 Prog: SAPLRSDRP
Message no. RS_EXCEPTION301
Diagnosis
En error has been triggered. This message specifies where in the coding the error occurred. This helps you to localize the error quickly.
May I know what causes this error and how to troubleshoot it?
Thank you.

Venkat,
You are either a genius or working for SAP.
In any case, your solution solved my problem.
Thanks heaps!

Similar Messages

  • Main optimizer error - There is already a transaction for the system

    Hi Guru's,
       I am trying to download support packs from maintenance optimizer in solution manager system. When i select the logical system it gives the error
    'There is already a transaction for the system of this product version'
    After this error, it does not proceed further.
    There is many maintanence transactions in Maintanence optimizer. Now how to remove all these.
    Any ideas or solutions most welcome.
    Moses

    As Christian has already written, the only problem is that there is already an open Maintenance Transaction for that specific system. Maintenance Optimizer checks that you do not open two different Maintenance Transactions for a system at the same time.
    You only have to withdraw the old Maintenance Transaction to be able to proceed with the new one. Open the old Maintenance Transaction and click "Withdraw" on the bottom of the page. If it is grayed out, you need to go one step backwards, there you can withdraw it.
    Best regards,
    Joachim

  • Error -RFC_ERROR_SYSTEM_FAILURE- There is already a line with the same key.

    Hi,
    While executing a report in BEx am faced with the error above. It ocurs when i take a drill down on Purchase order number field ( free charact). I tried by inserting this info-object into rows but still teh same error occurs and the connection with teh server is snapped.
    The said field is also an user input field and the variable does not seem to the working as data other than the input values is fetched. There is a dump in ST22 with teh following error analysis-
    You wanted to add an entry to table
    "\FUNCTION-POOL=RRK0\FORM=EMPTY_COPY_DAT_N\DATA=<L_TSX_CSKID>[2
    you declared
    with a UNIQUE KEY. However, there was already an entry with the
    same key.
    This may have been in an INSERT or MOVE statement, or within a
    SELECT ... INTO statement.
    Plz guide
    Regards,
    Saurabh Diwakar

    Hi,
    take a look at this SAP note:
    Term ITAB_DUPLICATE_KEY; SAPLRRK0; empty_copy_dat_n_01
    SAP Note Number: [966238 |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393636323338%7d]
    Regards
    Andreas

  • Crawl Error GetVirtualServerPolicyInternal - An item with the same key has already been added

    Hi,
    I did an index reset and now I can't start any crawl. It's complaining "An item with the same key has already been added".  Exception seems to from Microsoft.Office.Server.Search.Internal.Protocols.SharePoint2006.CSTS3Helper.GetVirtualServerPolicyInternal. 
    What should I check? Thanks.
    The SharePoint item being crawled returned an error when requesting data from the web service. ( Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: 9e69ff9c-f925-50bf-5110-d1b0e74c77bc; SearchID = 522CB441-0028-4E7D-BED4-4230D7ADD14B
    04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
     dm1k Medium   Exception Type: System.ArgumentException *** Message : An item with the same key has already been added. *** StackTrace:    at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean
    add)     at Microsoft.Office.Server.Search.Internal.Protocols.SharePoint2006.CSTS3Helper.GetVirtualServerPolicyInternal(String strStsUrl, WssVersions serverVersion, sPolicyUser[]& vUsers, sPolicyUser& anonymousUser, String&
    strVersion, String[]& vServerWFEs, Boolean& fIsHostHeader, Boolean& fIsAllUsersNT, Boolean& fIncludeSiteIdInCompactURL)     at Microsoft.Office.Server.Search.Internal.Protocols.SharePoint2006.CSTS3Helper.GetVirtualServerPolicy(String
    strStsUrl, sPolicyUser[]& vUsers, sPolicyUser& anonymousUser, String& strVersion, String[]& vServerWFEs, Boolean& fIsHostHeader, Boolean... 7a91de3b-a271-43c3-9f1a-935558902623
    04/22/2015 19:37:10.93* mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
     dm1k Medium   ...& fIsAllUsersNT, Boolean& fIncludeSiteIdInCompactURL) 7a91de3b-a271-43c3-9f1a-935558902623
    04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
     fsa0 Monitorable GetVirtualServerPolicy fail. error 2147755542, strStsUrl
    http://serverurl 7a91de3b-a271-43c3-9f1a-935558902623
    04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
     dvt6 High     SetSTSErrorInfo ErrorMessage = Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7 hr = 80042616  [sts3util.cxx:6988] 
    search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
    04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
     dvi3 High     Couldn't retrieve server
    http://serverurl policy, hr = 80042616  [sts3util.cxx:1865]  search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
    04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
     dvu0 High     STS3::StoreCachedError: Object initialization failed.  Message:  "Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7"
    HR: 80042616  [sts3util.cxx:7083]  search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
    04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
     dvg4 High     Server serverurl security initialization failed, hr = 80042616 error Message Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7 
    [sts3util.cxx:1591]  search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
    04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
     dv5x High     CSTS3Accessor::InitServer: Initialize STS Helper failed. Return error to caller, hr=80042616  [sts3acc.cxx:1932]  search\native\gather\protocols\sts3\sts3acc.cxx 7a91de3b-a271-43c3-9f1a-935558902623
    04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
     dv3t High     CSTS3Accessor::InitURLType fails, Url
    http://serverurl, hr=80042616  [sts3acc.cxx:288]  search\native\gather\protocols\sts3\sts3acc.cxx 7a91de3b-a271-43c3-9f1a-935558902623
    04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
     dvb1 Medium   CSTS3Accessor::Init fails, Url
    http://serverurl, hr=80042616  [sts3handler.cxx:337]  search\native\gather\protocols\sts3\sts3handler.cxx 7a91de3b-a271-43c3-9f1a-935558902623
    04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
     dvb2 Medium   CSTS3Handler::CreateAccessorExD: Return error to caller, hr=80042616            [sts3handler.cxx:355]  search\native\gather\protocols\sts3\sts3handler.cxx 7a91de3b-a271-43c3-9f1a-935558902623
    04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Crawler:FilterDaemon         
     e4ye High     FLTRDMN: URL
    http://serverurl Errorinfo is "Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7"  [fltrsink.cxx:566]  search\native\mssdmn\fltrsink.cxx 
    04/22/2015 19:37:10.93  mssearch.exe (0x1118)                    0x0628 SharePoint Server Search       Crawler:Gatherer Plugin      
     cd11 Warning  The start address http://serverurl cannot be crawled.  Context: Application 'Enterprise_Search_Service_Application', Catalog 'Portal_Content'  Details:  The SharePoint item being
    crawled returned an error when requesting data from the web service.   (0x80042616) 
    04/22/2015 19:37:10.99  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x06B4 Search                         Fuzzy Name Search            
     ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to 
    load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. ab403221-f69c-43ef-a8cc-7df384f6a4b3
    04/22/2015 19:37:10.99  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x06B4 Search                         Fuzzy Name Search            
     ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. ab403221-f69c-43ef-a8cc-7df384f6a4b3
    04/22/2015 19:37:10.99  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x06B4 Search                         Fuzzy Name Search            
     ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. ab403221-f69c-43ef-a8cc-7df384f6a4b3
    04/22/2015 19:37:11.00  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                         Fuzzy Name Search            
     ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to 
    load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. 2bbbeea9-aeb8-4497-a774-2927bd21ba98
    04/22/2015 19:37:11.00  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                         Fuzzy Name Search            
     ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. 2bbbeea9-aeb8-4497-a774-2927bd21ba98
    04/22/2015 19:37:11.00  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                         Fuzzy Name Search            
     ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. 2bbbeea9-aeb8-4497-a774-2927bd21ba98
    04/22/2015 19:37:11.00  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x10E4 Search                         Fuzzy Name Search            
     ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to 
    load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. e15da110-f86d-4e3d-8d73-a67dccaa82cd
    04/22/2015 19:37:11.00  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x10E4 Search                         Fuzzy Name Search            
     ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. e15da110-f86d-4e3d-8d73-a67dccaa82cd
    04/22/2015 19:37:11.00  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x10E4 Search                         Fuzzy Name Search            
     ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. e15da110-f86d-4e3d-8d73-a67dccaa82cd
    04/22/2015 19:37:11.03  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                         Fuzzy Name Search            
     ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to 
    load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. 58d54385-497b-466d-9f02-aeba664bc1b6
    04/22/2015 19:37:11.03  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                         Fuzzy Name Search            
     ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. 58d54385-497b-466d-9f02-aeba664bc1b6
    04/22/2015 19:37:11.03  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                         Fuzzy Name Search            
     ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. 58d54385-497b-466d-9f02-aeba664bc1b6

    Hi,
    For troubleshooting your issue, please take steps as below:
    1. Try to crawl your content source using farm admin account.
    2.
    Disable loopback check .
    3.Add reference  SPS3s://WEB into your content source start addresses.
    For more information, please refer to these blogs:
    http://sharepoint.stackexchange.com/questions/5215/crawling-fails-with-404-error-message-but-the-iis-log-tell-a-different-story
    http://www.cleverworkarounds.com/2011/07/22/troubleshooting-sharepoint-people-search-101/
    http://blogs.msdn.com/b/biyengar/archive/2009/10/27/psconfig-failure-with-error-an-item-with-the-same-key-has-already-been-added.aspx
    Best Regards,
    Eric
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Web Matrix FTP Remote Connection Error - "Connection Error - Failure to get file list from server. An entry with the same key already exists."

    Does anyone have experience with this issue when connecting to a Linux FTP Web Server running a FTP Site?
    "Connection Error - Failure to get file list from server. An entry with the same key already exists."
    I cannot access the root directory of the ftp file server using Web Matrix 3. The site is .php based, and
    is accessible when connecting with FileZilla or Remote Connecting via FTP with Visual Studio.
    All sites have been deleted from Web Matrix, the user Application Data has been cleared and Web Matrix has been reinstalled.
    Issue Persists....
    Thanks in advance,
    Justin

    Turns out that the program leaves metadata in your app data folder that is not removed upon uninstallation of the software.
    This is incorporated to communicate with a file that uploaded into the ftp directory when publishing pages.

  • Unable to load the tables in the Power Pivot Window – An Item with the Same Key has already been added

    Hi there,
    I recently had the following situation, where I changed the source of my CSV file in Power Query.
    Once I had reloaded the file, it would then not load into Power Pivot. So I disabled the loading from Power Query into Power Pivot. I then enabled the loading to the Data Model. Which then successfully loaded the data into Power Pivot.
    But once I went into Power Pivot, had a look, then saved the Excel file. Once saved I closed the Excel file. I then opened the Excel file again and all the sheets that interact with the Power Pivot data work fine.
    But if I go and open Power Pivot I get the following error: Unable to load the tables in the Power Pivot Window – An Item with the Same Key has already been added.
    This is what I get from the Call Stack
       at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
       at Microsoft.AnalysisServices.Common.LinguisticModeling.SynonymModel.AddSynonymCollection(DataModelingColumn column, SynonymCollection synonyms)
       at Microsoft.AnalysisServices.Common.LinguisticModeling.LinguisticSchemaLoader.DeserializeSynonymModelFromSchema()
       at Microsoft.AnalysisServices.Common.SandboxEditor.LoadLinguisticDesignerState()
       at Microsoft.AnalysisServices.Common.SandboxEditor.set_Sandbox(DataModelingSandbox value)
       at Microsoft.AnalysisServices.XLHost.Modeler.ClientWindow.RefreshClientWindow(String tableName)
    I would assume that the issue is with the synonyms and for some reason, when I disabled the loading of my data into the Power Pivot Model, it did not remove the associations to the actual table and synonyms.
    If I renamed the table in Power Pivot it all works fine. So that was my work around. Fortunately I did have a copy of the Excel workbook before I made this change. So I could then go and add back in all the relevant data to my table.
    Has anyone had this before and know how to fix it?
    http://www.bidn.com/blogs/guavaq

    Hi there
    I can share the work book, if possible to send me an email address. As the workbook size is about 9Mb.
    Thanks
    Gilbert
    http://www.bidn.com/blogs/guavaq

  • SharePoint Search Service upgrade to 2013 fails: "Inner Exception: An item with the same key has already been added."

    Here's the situation:
    Upgrading a SharePoint Server 2010 Search Service Application dB to our SharePoint 2013 SP 1 development environment, using the Management Shell
    Running the following commands: 
    $applicationPool= Get-SPServiceApplicationPool -Identity 'SearchService_AppPool'
    $searchInst = Get-SPEnterpriseSearchServiceInstance -local
    Restore-SPEnterpriseSearchServiceApplication -Name 'SearchServiceApplication' -applicationpool $applicationPool -databasename 'SearchServiceApplicationDB' -databaseserver SERVERNAME -AdminSearchServiceInstance $searchInst
    Creates the search dBs (crawl, links, analytics) successfully; however, in the end, I get....
    "Exception: Action 15.0.107.0 of Microsoft.Office.Server.Search.Upgrade.SearchAdminDatabaseSequence failed."
    Looking at the ULS logs, I find the following:
    Inner Exception: An item with the same key has already been added.
    at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)     at Microsoft.Office.Server.Search.Administration.OOTBSchemaDefinition.FindAndFixExistingManagedProperties()     at Microsoft.Office.Server.Search.Administration.OOTBSchemaDefinition.InstallManagedProperties(Boolean
    upgrade)     at Microsoft.Office.Server.Search.Administration.OOTBSchemaDefinition.Upgrade()     at Microsoft.Office.Server.Search.Upgrade.UpdateAllOOTBProperties.Upgrade()     at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
    Exception: Action 15.0.107.0 of Microsoft.Office.Server.Search.Upgrade.SearchAdminDatabaseSequence failed.
    at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()     at Microsoft.SharePoint.Upgrade.SPDatabaseSequence.Upgrade()     at Microsoft.Office.Server.Search.Upgrade.SearchDatabaseSequence.Upgrade()     at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object
    o, Boolean bRecurse)
    Anyone encounter anything like this during their search upgrade process? I'm not honestly even sure what duplicate value to look for at this point, if I were to run a SELECT Id, ClassId, ParentId, Name, Status, Version, Properties FROM Objects on
    "SharePoint_Config" in SSMS. Any insight or opinions on the matter are welcome; and thanks to those who choose to reply to this, in advance.

    Hi ,
    You can enable the ULS log on verbose level (note, remember to reset to default level after finished troubleshooting) for more information per the following article, then check there should be more useful message for helping solve the issue.
    http://www.brightworksupport.com/enabling-verbose-logging-to-compare-against-c/
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/12c99279-d3aa-46de-bc57-d5d250692ff0/upgrade-of-search-service-application-from-2010-to-2013-failure?forum=sharepointadmin
    https://www.simple-talk.com/blogs/2014/04/22/sharepoint-2010-to-2013-search-service-application-upgrade-issueaction-15-0-80-0-fails/http://blogs.msdn.com/b/biyengar/archive/2009/10/27/psconfig-failure-with-error-an-item-with-the-same-key-has-already-been-added.aspx
    Thanks,
    Daniel Yang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] 
    Daniel Yang
    TechNet Community Support

  • Record filtered in advance as error records with the same key exist

    Dear Masters
       I am getting below error for master data (0MATERIAL_ATTR), while loading data from PSA to Info object through DTP (I have set the Handle duliocate record also). When I checked that error data in Error Stack, I am getting below error for all records(100)
    "Record filtered in advance as error records with the same key exist"
    Could u please help me to resolve this issue
    Thanks in Advance
    Raja

    Hi
    Thanks for reply
    I have loaded the Delta data in PSA. In PSA data was loaded successfully. I got the failure only when I loaded the from PSA to Maste data
    Thanks in advance
    Raja

  • DTP error: No Message: Filter Out New Records with the Same Key

    Hello SDN,
    I have looked up solutions for this problem, but didnt find anything suitable. I am getting this error in multiple places: when i load pure master data into IOs like 0VENDOR, 0PLANT etc. or when I load DSOs like 0FIAP_O03.
    When I checked the load in sdn, one of the solutions was to apply note: 1489178 , but in this case, the user had nothing selected in his 'semantic key' list. Whereas, in my case.. 0PLANT is checked ...eventhough the other fields are disabled. So, I think my DTP is accurate.. as 'plant' is the only key field here.  But it still fails .. and so does 0VENDOR load. Moreover... the DSO load is crucial for our reports in Prod and its failure is a bigger issue for us.
    Has anyone seen this problem? Is there another solution other than the above note?
    Regards.

    Hello Arvind,
    If I select that option, will it delete one record if it finds 2 records with the same semantic key in 1 data packet. Also, will it delete a record if it finds that there is already a record existing in the data target with the same semantic key.
    I think, both of the above scenarios will result in incorrect data. From my understanding, 'Handle Duplicate Keys' is mostly used to filter out master data.. as in some instances.. you might get duplicate entries.
    But, in my case, the same error is happening in the case of data load from 0fi_ap_4 --> 0fiap_o03. What happens is... the overall status of the DTP becomes green.. but when you look at details section, the process stops at this message which is in yellow. Because of this, the DTP status in the PC remains yellow.. and finally turns red.. and the PC turns red.
    From my knowledge, it appears more like a bug. I was hoping to find a SAP NOTE which has some manual instructions that can resolve the issue, since the above NOTE asks for a support pack upgrade.. which would need a whole lotta testing.
    Regards.

  • There is already a transaction for the systems of this product version(MOPZ)

    Hello All,
    I am trying to configure maintenance optimizer in Solution Manager 7.0
    on Windows 2003 server and SQL 2005 server.
    I am configuring this for SAP CRM 2007 server.
    Created the server, database and system in SMSY
    Created Logical Component in TA code SMSY
    SM59 connection for SAP-OSS is OK.
    S-User is assigned to a User.
    Created a solution using TA code solution_manager.
    Defined the product version for the solution created in the TA code
    solution_manager.
    When creating a Maintenance Optimizer transaction, I select the
    product version and its logical component in the Plan Maintenance
    (Phase) and click on Continue to go to Select Files Phase, I get below
    warning:
    Information Procedure 8000000130 Saved
    Warning: Status was reset by system
    Warning: There is already a transaction for the systems of this
    product version
    I cannot get pass this phase.
    I have deleted and recreated the solution, carried out the same
    activity again but its giving the same Warning
    Warning: Status was reset by system
    Warning: There is already a transaction for the systems of this
    product version
    Any help will be appreciated???
    Regards,
    Satish.

    Hello Ragu,
    Thanks for your response.
    As of now, we do not have ChaRM in place. Secondly, we use a single customer number.
    I would like to let you know that in our landscape we have two CRM server, one ECC sever, one SOLMAN7.0 server.
    I tried to configure MOPZ for CRM, ECC, SOLMAN server to download the respective STACKS.
    I was successful in configuring CRM and SOLMAN.
    But  when I tried to configure in ECC, it failed due to RFC erros.
    So I deleted the transaction for the ECC system and deleted the system itself in Solution Manager.
    Reconfigured the Systems in "SMSY", RFC connections are correctly defined to configure MOPZ between SOLMAN7.0 and ECC6.0.
    When I start configuring the MOPZ, I cannot get pass the first phase and this is when I get an error: There is already a transaction for the systems of this product version.
    Please let me know if you need further information.
    Regards,
    Satish.

  • Copy, paste and crash in Keynote. I've seen a lot of postings with the same problem. Is there a solution or fix? I'm using keynote 9 v5.1.1

    I've seen a lot of postings about keynote crashing when doing simple copy and paste. I have the same problem, Keynote 9 v5.1.1 Is there a fix?

    I had the same problem with the LCD after replacing hinges and could not figure this out. 
    To solve the issue, I bought another A1237 of eBay that apparently had no HD/SSD, but it arrived with a swollen battery.  I removed the bad battery and replaced and moved SSD over and "Voila"...it amazingly light up...........

  • HT2292 the latest itunes update on my vista laptop brings up R6034 runtime error - after rebooting - uninstalling - reinstalling i have no itunes access. please correct in your updates. there are others with the same error message

    the latest itunes update on my vista laptop brings up R6034 runtime error - after rebooting - uninstalling - reinstalling i have NO itunes access. please correct in your updates. there are others with the same error message   thank you!!

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • IPod Updater error - "there may be open files on the iPod"

    I'm trying to help my nephew fix his scroll-wheel 10 gb iPod before he embarks on a long flight to India. When he plugged his iPod into his new iBook, iTunes launched, but wouldn't let him copy any purchased music to his iPod. It told him that he needed to upgrade his software. I've seen from the posts here that this is not uncommon.
    We went ahead and tried, but the only option was "restore", "updated" had been grayed out. Since he had already copied all of his music off of his iPod onto his new iBook with Senuti, we opted to restore. This failed and we now get a message from the updater saying that "an error occured. There may be open files on the iPod".
    If I disconnect the iPod from the computer, the screen displays a folder with an exclamation point and then alternates with an Apple logo. It looks like it's in a loop trying to start up, but then goes to the folder again, then goes blank for a second and displays the Apple logo, etc.
    If I plug in via USB, for a brief second I get the "do not disconnect message", but then it goes right to "OK to disconnect". After I disconnect, the "OK to disconnect" does not go away, I have to reset in order to get back to the alternating folder with exclamation and Apple logo.
    If I plug in via firewire, the iPod does mount in Finder and iTunes recognizes. It give me the message stating that version 2.3 is available and do I want to update. If I choose "cancel", the iPod docks in iTunes and I can manually add songs to the iPod (but not purchased music). But when I undock, it goes back to the alternating folder and logo.
    If I say I do want to update, the updater launches 11-17-05, but gives me the "there may be open files" error message.
    Anyone had this problem and/or know how to fix it? Another factor to throw into the mix: I'm pretty sure my nephew was using this machine with a PC and everything we've tried together has been on the Mac. I've tried docking using Virtual PC, but it doesn't recognize the iPod at all, using firewire or USB.
    Does anyone know if I SHOULD be able to update or restore this iPod using a Mac?
    Also, I've tried this on both my nephew's iBook and my Powerbook. Both are running 10.4.3 with iTunes 6.0.1.
    Any help is greatly appreciated.

    I am having precisely the same issue.
    I am running Adobe Acrobat XI Standard on Windows 8 Professional. All updates have been applied to both.
    (I have 4 other computers with identical configurations where this problem does not occur.)
    In the problem machine (and a 2nd computer with the same issue) I can easily open the file using a UNC path, e.g. \\server\h\filename.pdf in Adobe Acrobat.
    Using the drive mapping, net use h: \\server\h, I cannot access the file H:\filename.pdf.
    I can't open H: from within Adobe Acrobat either, not just the PDF.
    I can open any other file on that drive with any other program.
    I can open \\server\h\filename.pdf and the H: drive from Foxit Reader installed on the same computer.
    The specific problem is that Adobe Acrobat XI can't open or see a mapped drive by drive letter.
    Any ideas?

  • Runtime error in kob5, kob1 and line items display in Cost Analysis in ko03

    Hello everyone,
    I would like to ask for your expert advice on a situation we need to have a solution. Let me tell you what happened.
    In ko88, we tried to settle an internal order to a final asset using 'partial capitalization'. We encountered an error 'Settlement amount is greated than available amount'. I checked in kob5 and we have two line items: 90,000 and 30,000. Both have to be settled to three different final assets namely asset 1, asset 2 and asset 3. The settlement rule was as follows at first:
    Line 1: 90,000 to be settled to asset 1, asset 2 and asset 3 at 65,000; 40,000 and 15,000, respectively.
    Line 2: 30,000 to be settled to asset 1, asset 2 and asset 3 at 65,000; 40,000 and 15,000, respectively.
    Due to the error, we changed the settlement rule following these directions:
    1. Remove the settlement rules that we had so we can start anew.
    2. Choose the first line item and click on "Final Settlement".
    3. Enter the necessary settlement details (total should equal to 90,000 only).
    4. Go back and save.
    5. Choose the second line item and click on "Final Settlement".
    6. Enter the necessary settlement details (total should equal to 30,000).
    7. Go back and save.
    8. Then, check again the distribution rules set.
    Everything was saved and done correctly. So, we tried to do ko88 this time. But, the previous error 'Settlement amount is greated than available amount' still occured.
    I went back to kob5 and when I ran it, a runtime error occured. I went to see the actual line items in kob1, and I encountered the same runtime error. I went to see in ko03>cost analysis>the actual debit line items, and I encountered the same runtime error. Were my actual line items lost? How do I retrieve them?
    Thanks in advance.
    Best regards,
    Peter

    hi,
    check in SAP OSS with the message number you get is there any SAP Notes tobe applied.

  • Print error - there was a problem connecting to the server - spinning beach ball

    This has happened pre-yosemite and since.  It used to only happen at home but now also happens at work.  Every time I try to print, I get a spinning beach ball and a long delay until I get an error message saying there was a problem connecting to the server. At home, after clicking OK, I get a second spinning beach ball session with same error.  Once I click OK second time, I get print window and can print.  At work, it's only one session of spinning beach ball.  The office problem occurred after upgrading to yosemite.  I've deleted and added the printers without resolution.  I've repaired permissions.  The home problem has been going on for at least a year, probably a couple.  Using a macbook pro.

    There are many possible causes for this issue, and it may be very hard to resolve without wiping your account clean of everything except documents as a last resort. Please take each of the following steps that you haven't already tried. Back up all data before making any changes.
    If you get the alert in the login screen before you log in, stop here and ask for instructions.
    Step 1
    If you get the alert as soon as you log in, it's probably caused by one of your login items or by software that otherwise loads at startup or login. Ask if you need help identifying it. Known offenders are "1Password" and "Adobe Resource Synchronizer."
    Step 2
    If there's an icon representing the server in the sidebar of a Finder window, hold down the command key and drag it out.
    Step 3
    In the Finder, press the key combination command-K or select
              Go ▹ Go to Server...
    from the menu bar. In the upper right corner of the window that opens is a Recent Servers popup menu represented by a clock icon. From that menu, select
              Clear Recent Servers…
    and confirm. Test.
    Step 4
    Open the Printers & Scanners pane in System Preferences and delete any network devices you no longer use. If in doubt, delete them all and add back the ones you want.
    Step 5
    Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing  command-C:
    ~/Library/PDF Services
    In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. A folder may open. If it does, move the contents to the Desktop, or to a new folder on the Desktop. Log out and log back in. Test. If there's no change, put the items you moved back where they were and continue.
    Step 6
    Open the folder
    ~/Library/Preferences
    as in Step 5 and move the file named "loginwindow.plist" items in that folder to the Trash, if it exists (it may not.)
    Log out and back in again, and test.
    Step 7
    Other possible causes are references in the iPhoto, iTunes, or iMovie library pointing to the server, bookmarks in the Preview application, and PDF files created by Adobe Acrobat with embedded scripts.
    Try rebuilding the iPhoto library, if applicable.
    Step 8
    Resources such as images or sounds stored on the server may have been added to various applications. Examples would be pictures added to Contacts and custom sounds added to Mail. The range of possibilites here is practically infinite, so I can't be more specific. You might get a hint by launching the Console application and looking for error messages that appear at the same time as the alerts.
    Step 9
    Disconnect all wired peripherals except those needed to start up. Start up in safe mode. Test. After testing, restart as usual (not in safe mode) and verify that you still have the problem.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Step 10
    Triple-click the line below to select it:
    /System/Library/CoreServices/Directory Utility.app
    Rght-click or control-click the highlighted text and select
              Services ▹ Open
    from the contextual menu.* The application Directory Utility will open.
    In the Directory Utility window, select the Directory Editor tool in the toolbar. Select Mounts from the Viewing menu in the toolbar, and/Local/Default from the node menu, if not already selected. On the right is a list of names and values. By default, the list is empty. If it's not empty, post a screenshot of the window and stop here.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.
    Step 11
    Open the following file as you did in the last step:
    /etc/auto_master
    It will open in a TextEdit window. The contents should be exactly this:
    # Automounter master map
    +auto_master          # Use directory service
    /net               -hosts          -nobrowse,hidefromfinder,nosuid
    /home               auto_home     -nobrowse,hidefromfinder
    /Network/Servers     -fstab
    /-               -static
    If there are any other lines in the window, post them. Otherwise, close the window.

Maybe you are looking for