Error: Timeout occurred whilst retrieving page meta data.????

Hi,
I sucessfully enabled SSL on PORTAL 3.0.9.8.0 but I could only use it inside our firewall. This is because I had my servername setup to be "portal" instead of a valid DNS name like "portal.mycomp.com".
I have changes my servername from "portal" to "portal.mycomp.com" in all the conf. files that I know of and it still doesn't work. The funny thing is that I can access the single-sign-on server but not portal. For example, #1 of the following doesn't work but #2 works.
#1: https://portal.mycomp.com/pls/portal30
#2: https://portal.mycomp.com/pls/portal30_sso
This is the error msg I got from my browser when I try to go to #1 ---> "Error: Timeout occurred whilst retrieving page meta data."
I had also made sure that I didn't have any typo when I executed the ssodatan script. The following is how I executed my ssodatan script:
ssodatan -w https://portal.mycomp.com/pls/portal30/ -l https://portal.mycomp.com/pls/portal30_sso/ -s portal30 -o portal30_sso -c portal
*note: "portal" is my connect string.
Does anyone have any idea what my problem would be?
Yes, I have also re-requested a new SSL Certificate from Varisign with the new servername "portal.mycomp.com" and installed it properly.
Thanks in advance,
Victoria.

Victoria,
Did you find a solution to this ?
We are running Oracle Portal 3.0.9.8.1 on Solaris and are having
the same problem. Everything works okay through http but with
https:
1. https://<domain name>/pls/portal30
we get the error "Error: Timeout occurred whilst retrieving page
meta data."
2. https://<domain name>/pls/portal30_sso - works okay
3. https://<domain name>/test.jsp - works okay
Thanks
Simon.

Similar Messages

SSL. Error: Timeout occurred whilst retrieving page meta data

Hi!
I am configuring oracle 9iAS 1.0.2.2a Portal to enable SSL and I did
everything that was said at http://igloo.its.unimelb.edu.au/Webmail/tips/msg00569.html
zone.properties
servlet.page.initArgs=useScheme=http
servlet.page.initArgs=usePort=7778
servlet.page.initArgs=httpsports=4443
wdbsvr.app
[DAD_portal30]
cgi_env_list = REQUEST_PROTOCOL=HTTPS,SERVER_PORT=4443
[DAD_portal30_sso]
cgi_env_list = REQUEST_PROTOCOL=HTTPS,SERVER_PORT=4443
This was my ssodatan
ssodatan -w https://me.me.me:4443/pls/portal30/ -l
https://me.me.me:4443/pls/portal30_sso/ -s portal30 -o portal30_sso
But when I access https://me.me.me:4443/pls/portal30/ I get
Error: Timeout occurred whilst retrieving page meta data
However, https://me.me.me:4443/pls/portal30_sso/ is working fine!
One more thing. I can access my login server at
http://me.me.me:7778/pls/portal30/ and when it prompts for username and password
it uses https.
https://me.me.me:4443/pls/pors/portal30_sso.wwsso_app_admin.ls_login
Help would be greatly appreciated!

jserv.log (these lines appear many times)
[28/06/2002 17:07:03:987 GMT+03:00] page/JNI: Exception when trying to connect in 0.
[28/06/2002 17:07:03:987 GMT+03:00] page/Timeout occurred, label=page url=https://me.me.me:4443/pls/portal30/!PORTAL30.wwpob_page.show?_pageid=51
[28/06/2002 17:07:03:987 GMT+03:00] page/ContentFetcher Unexpected Exception, name=content-fetcher3
javax.net.ssl.SSLException: SSL handshake failed: X509CertChainIncompleteErr
     at oracle.security.ssl.OracleSSLSocketImpl.startHandshake(Native Method)
     at oracle.security.ssl.OracleSSLSocketImpl.startHandshake(Unknown Source)
     at HTTPClient.HTTPConnection.getSSLSocket(HTTPConnection.java, Compiled Code)
     at HTTPClient.HTTPConnection.sendRequest(HTTPConnection.java, Compiled Code)
     at HTTPClient.HTTPConnection.handleRequest(HTTPConnection.java, Compiled Code)
     at HTTPClient.HTTPConnection.setupRequest(HTTPConnection.java:3545)
     at HTTPClient.HTTPConnection.Post(HTTPConnection.java:2478)
     at HTTPClient.HTTPConnection.Post(HTTPConnection.java:2605)
     at oracle.webdb.cache.CacheHTTPConnection.getHTTPResponse(CacheHTTPConnection.java:129)
     at oracle.webdb.cache.CacheHTTPResponse.process(CacheHTTPResponse.java, Compiled Code)
     at oracle.webdb.cache.CacheHTTPConnection.common(CacheHTTPConnection.java:114)
     at oracle.webdb.cache.CacheHTTPConnection.Post(CacheHTTPConnection.java:210)
     at oracle.webdb.page.ContentFetcher.run(ContentFetcher.java, Compiled Code)
Changes to httpd.conf
<IfDefine SSL>
Port 4443
Listen 4443
</IfDefine>
<VirtualHost default:80>
</VirtualHost>
<VirtualHost default:4443>
DocumentRoot "/oas/Apache/Apache/htdocs"
ServerName me.me.me
ServerAdmin [email protected]
ErrorLog /oas/Apache/Apache/logs/error_log
TransferLog /oas/Apache/Apache/logs/access_log
SSLCertificateFile /oas/Apache/Apache/conf/ssl.crt/mycert.crt
SSLCertificateKeyFile /oas/Apache/Apache/conf/ssl.key/mycert.key
</VirtualHost>

Error: Timeout occurred while retrieving page meta data.

Hi,
I have 10.1.2.0.0 installed. I log into portal and time to time I keep getting the following error:
Error: Timeout occurred while retrieving page meta data.
Any ideas what might be the cause. It may work ok for sometime but all of a sudden I keep getting the above error.
Thanks

I could be the RAC, and have failovers etc. as usually this is associated with a performance issue or timeout... There should be something in the logs.
What I recommend you is that you log a Service Request into Support... and supply the PDA (Metalink Note:169490.1).
I hope it helps...
Cheers,
Pedro.

Error -1074118610 occurred at niUSRP Fetch Rx Data (CDB Cluster).vi

I researched this error in forum ,however, I don't reach the solutions.
Error -1074118610 occurred at niUSRP Fetch Rx Data (CDB Cluster).vi
The received data is out of sequence. This may be a symptom of overflows due to an inability to maintain streaming at the specified IQ Rate, or rearrangement of packets by an ethernet adapter or network switch.
When I start to USRP, I am taking this error 6-7 minutes later. I tried IQ Rate= 2M and samples per symbol=4 also IQ Rate is approximately 192k and samples per symbol= 20 for 9600 baud rate.

Hello ITUbahadir
I understand you are NOT testing a LabVIEW shipping example. If this is correct, Could you try to test the shipping examples? Same error? If this is incorrect, what is the name of the example?
If the problem is specific to your code, could you share it? If you are not able to do that, could you explain me what have you changed to the code?
Regards
Frank R.

Logon Balancing error 88 and Error timeout occured for BW transaction Iview

Hello All,
I am trying to connect BW system from portal.
We are using SAP GUI for Window to launch the Transaction iViews and browser we are using is IE 7.0 and IE 8.0. I have selected the Technique to Start SAP GUI for Windows is "SAP Shortcut File". When calling the iView, it opens in the new window and asked downloads the file.
After download , I am getting connecting window and then following error
Logon Balancing error 88 :Connection to server is not possible(RC.9)
In detail error is
Error: timeout occured
Tue Aug 16 15:50:44 2011
Release 640
Component NI(Network interface), version 37 rc=-5,
Please suggest any approaches for the issue.
Thanks
Anand Kumar

Hello Vijay, Sandeep,
1) when I try the following combination in service file, I am getting given below error. if i use sapmsBWD 3600/tcp or if I do not use sapmsBWD 3600/tcp, i am getting the same following error.
sapgw97 3397/tcp
sapgw98 3398/tcp
sapgw99 3399/tcp
SAPmsBWD 52500/tcp
sapmsBWD 3600/tcp
<return>
Logon Balancing error 88 :Connection to server is not possible(RC.9)
In detail error is
Error: timeout occured
Tue Aug 16 15:50:44 2011
Release 640
Component NI(Network interface), version 37 rc=-5,
2) when I try the following combination in service file, I am getting given below error
sapgw97 3397/tcp
sapgw98 3398/tcp
sapgw99 3399/tcp
sapmsBWD 3600/tcp
SAPmsBWD 52500/tcp
<return>
Error:partner 10.21.80.23:sapmsBWD not reached
Tue Aug 16 17:22:31 2011
realease 710
Component NI(network interface) version 39
Detail Nip connect2: 10.21.80.23:3600
system call connect
Error No:10061
'WSAECONNREFUSED:connection refused'
@Sandeep: I have check the port number in SMMS transaction code: I have three port Number :3220,3320,8020.
Please any one can guide me further.
Thanks.
With regards.
Anand Kumar

OBIEE 11g Map Visualization Error - basemap is defined in spatial meta-data

Hi All,
I have installed OBIEE 11g successfully on my Desktop Machine, deployed the Sample Applications regarding Mapviewer and its working fine. I have seen all the Maps and they are running fine in fact they are editable and i can easily do anything with those Maps but,
The issue is that when i am going to create a new Report and try to integrate Map on it then it shows an error as display below;
A basemap is required to render a map. Please ensure that atleast one basemap is defined in the spatial meta-data
Error Details
Error Codes: EMGUNIA3
Location: saw.views.evc.activate, saw.httpserver.processrequest, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool,
saw.threadpool, saw.threads
I have also followed this link ( http://erpthings.blogspot.com/2011/01/obiee-11g-inbuilt-mapping-and-spatial.html ) but it is also stuck on the same error at the end.
I didn't understand the problem why its giving an error like this while the Sample Application worked fine so, if there is any way to define a basemap in spatial meta-data plz guide me OR
Is there any way to integrate Map with OBIEE 11g ?
Cheers,
Masood.

This question has been solved!
Basically you need to ensure the database schema where the data source (Navteq) has been imported must have the privilege "Create Type"
This comes from the Oracle manual extract as shown below:
1.4.4.3 Creating MapViewer Array Types, if Necessary
For each database schema that it connects to, MapViewer checks for the existence of
the following SQL array types that support array-type binding variables that might
exist in some predefined themes:
■ MV_STRINGLIST
■ MV_NUMBERLIST
■ MV_DATELIST
If these types do not exist, MapViewer attempts to create them in the database schema
associated with the MapViewer data source. However, if the user associated with that
schema does not have sufficient privileges to create new types, a privileged user must
create the types by connecting to the data source schema and entering the following
statements:
CREATE or REPLACE type MV_STRINGLIST as TABLE of VARCHAR2(1000);
CREATE or REPLACE type MV_NUMBERLIST as TABLE of NUMBER;
CREATE or REPLACE type MV_DATELIST as TABLE of DATE;
Cheers.

An Error was encountered while retrieving page content

Hi guys,
I have a user that is having an issue when trying to add a header & footer and is receiving "an error was encountered while retieving page content" error. Our firm has acrobat 9.0 pro on windows xp. The file is located on a network share and even if i copy this file to my desktop it gives me this error. Let me know if you guys need more information.
Thanks.

Checking the network share is always a good starting point. Acrobat has had problems with some of these over the years. I would generally recommend working locally. However, that does not appear to be the current problem. Since you mentioned AA9.0, my first recommendation is to update AA which is currently at 9.4.4 version. That may solve the problem, partiuclarly if you are using 9.0. The updates may be done from the help menu (you will likely see several. The should always be installed in order). The help menu links generally give you cummulative updates. You can also download them from Adobe.com>downloads and select the updates in the right field near the top. You can then search for the Acrobat Windows updates. You have to generally install ALL of them that are listed in order. They generally are not cummulative. I am guessing the updates may fix the problem.

HT201210 unknown error 2003 occurred whilst trying to back up my ipnone 4

please help whilst trying to update my ipone4 and do a back up error 2003 appeared and now i cant use my phone

This explains the 2000 series errors
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.

"error in script on this page" while trying to install adobe flash player 11.4.402.278

hello, all --
i am a newbie of long standing , so please forgive my ignorance. i plead for mercy from the kind and generous people who answer inquiries here.
i got a notice on my computer that a newer version of adobe flash player was available. the one i had at the time was 11.4.402.265. the newer version was 11.4.402.278. i got to where i thought was the right place and clicked "download." within a few seconds i got a message saying that a "script error" had occurred on the page and did i want to continue running this script.
-- line 1
-- char 12948
-- error, object expected
-- code 0
-- URL http://127.0.0.1:1127/app/_js/adobe.js
it doesn't seem to matter whether i click "yes" or "no" on continuing to run the script. the next thing that happens is that i get a second "script error" notice.
-- line 1
-- char 1180
-- error, 'globalActiveActionItems' is undefined
-- code 0
-- URL http://127.0.0.1:2501/app/_js/adobe.js
it doesn't matter whether i click "yes" or "no" on whether i want to keep running the script. the screen reverts to saying that it is "retrieving install," then i get the second "script error" message again. and to make things worse, i can't get rid of the "retrieving install" screen; it has the minimizer button and the "quit" button (x), but the "quit" button does nothing, so for now i've simply minimized it.
what has happened here? what should i do to fix it? i've tried going back to the beginning and redoing it, but i end up over and over again with the second "script error" message. i've tried making sure that "scripting" is "enabled" under "tools/internet options/scripting," then closing and reopening internet explorer (a suggestion i found in a similar thread), but the same things keep happening.
i am on a dell optiplex 330, windows pro XP/SP3, IE 8.0.6001.18702.
thanks to anyone who has any suggestions for me.
-- susie margaret
[email address removed]

I have the same exact problem
-- line 1
-- char 12948
-- error, object expected
-- code 0
-- URL http://127.0.0.1:1127/app/_js/adobe.js
except
it looks like this being on line 2 and not on line 1
-- line 2
-- char 12948
-- error, object expected
-- code 0
-- URL http://127.0.0.1:1127/app/_js/adobe.js
i know it was only released 3 weeks ago but i hope someone can help, oh and i tried what susie did. it didnt work
thank you for your time

Problem in loading meta data !!!!

Hi,
While creating metadata in IDX2, I am getting communication error 'Error when opening an RFC connection' .
I have created port SAP<SYSTEM ID> and client no & giving rfc des of sap system in idx1 . and while loading meta data i an getting above error .
I able to load meta data if i use other (non sap ) port eg abc and usng   rfc des of sap system . but idocs are not reaching xi
What are the steps we should do for loading metadata by using sap port i.e client .
Please help me solve this problem
Thanks,
Sridhar

HI
ALE SETTINGS TO POST IDOC OUT OF SAP R/3
We need to do the following settings in XI
1)   Create an RFC Destination to the Sending System in transaction code (SM59)
a)   Choose create
b)   Specify the name of the RFC destination
c)   Select connection type as 3 and save
d)   In the technical settings tab enter the details SAP SID/URL and system number#
e)   Enter the Gateway host as same details above SID/URL
f)   Gateway service is 3300+system number#
g)   In the Logon /Security tab, enter the client user & Password details of Destination system
h) Test the connection and remote logon.Both should be succesful
2) Create Port Using Transaction Code IDX1
a)   Select create new button
b)   Enter the port name as SAP+SID (The starting char should be SAP)
c)   Enter the destination client
d)   Enter the RFC Destination created in SAP R/3 towards other system
e)   Save
3) Load Meta Data for IDOC Using transaction Using Transaction (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1
                    SETTINGS IN SAP R/3
     We need to do the following settings in R/3
     Logon to Sap R/3 System
1)   Create an RFC Destination to XI in transaction code (SM59)
a)   Choose create
b)   Specify the name of the RFC destination
c)   Select connection type as 3 and save
d)   In the technical settings tab enter the details SAP SID/URL and system number#
e)   Enter the Gateway host as same details above SID/URL
f)   Gateway service is 3300+system number#
g)   In the Logon /Security tab, enter the client user & Password details of Destination system
h)   Test the connection and remote logon.Both must be succesful
2)   Create communication Port for Idoc processing Using Transaction(We21)
a)   First Select Transactional RFC and then click create button
b)   Enter the destination port name as SAP+SID (The starting char should be SAP)
d)   Enter the RFC Destination created in SAP R/3 towards other system.
e)   Save
3)   Create Partner Profile with Outbound Parameters (WE20)
a)   Create New
b)   Create the Partner no. name as same the logical system name of the destination system
c)   Select Partner type LS
d)   Enter details for Type: US/USER, Agent, and Lang
     Then Save
e)   Select Partner no. and LS which were create above
f)   Now we have to give some Outbound Parameters.So click on ADD TO Create Outbound Parameter
g)   Select Message type
h)   Double click on Message Type and Then Enter the details for Receiving port, Pack size=1 and Basic type
I)   save
4)   In Transaction SALE, Create Logical System
a). Go to Basic Settings-> First Define logical systems
     and then assign logical systems
b)   Double click on Define the logical systems
c)   Give data for your Logicaal System and Name
d)   Now click on Save.Here one window may appear just click on Continue.Now the Logical System name is ready
e)   Assign the logical system name to the client
5)   Create Customer Distribution model in the transaction code BD64
1)   Click on the Create modal View button and enter the short text, Technical name etc as shown below
2)   Now select the created model view and click on Add message type button .A pop up box appears, enter Sending system, receiving system and message type
3)   Save the Distribution model
    Generate Partner Profiles
Click on Menu Item Generate Partner Profiles
    It leads to the next transaction where in the selection screen you have to provide Model view name, Partner System logical system and execute
    Then, you will be intimated about the partners, port creation, and outbound parameters creation
4)   Distribute Customer Distribution Model
    In the menu item GO to Edit->Modal View-> Distribute to the destination client
    Popup window appears ,press Enter
You will be intimated about the the Modal View Distributed
PLZ REWARDS POINTS
VIKAS

Get Meta Data for Structures used in RFCs

On Monday I asked in another thread, how to retrieve table meta data using RFCs (Get Table Meta Data with RFC)
Having a closer look on what information I got I realized, that this wasn't the exact information I was looking for, although the answers from Ferry have been very good.
What I am actually looking for isn't meta information of tables, but information about the "Associated Type" that is associated with every import, export, or table parameter of a function module.
If I double-click on one of those types in transaction se37 after choosing a function module, I get a wonderful overview about the structure including 'component', 'component type', 'data type', 'length', etc.
Is there an RFC I can call that gives me exactly this meta information by giving an associated type?
Best,
Stefan

Thanks Glen
I had a look on the proposed function module.
The good thing, it gives me information about the parameter naming for example table name and field name.
But it won't give me more detailed information about the table and the field.
Nevertheless
RFC1::RFC_GET_NAMETAB seems to give me what I need. So your call for RFC1 and RFC2 was a good one.
Thanks again.
Stefan

Grid Control - An error has occurred!

Hi!
I have trouble with my new grid control. 2 nodes work for 2 days ago, but now I got this error message:
An error has occurred!
Unable to obtain data for target node1 (and node2). The target may be down. Switching to the last 24 hrs view.
I tried to start emctl stop agent and emctl start agent on both nodes, and I also restart the grid-server. Nothing happen.
How to repair that?
Thanks
Regards
Ken

Try following:-
Re-start OMS
Then do following on both nodes:-
1. emctl stop agent
delete files in $ORACLE_HOME/sysman/log
delete files and any directoried in $ORACLE_HOME/sysman/emd/upload
delete files and any directories in $ORACLE_HOME/sysman/emd/state
delete files other than target.xml in $ORACLE_HOME/sysman/emd/ DO NOT DELETE ANY FOLDERS or TARGET.XML
2. emctl clearstate agent
3. emctl start agent
wait a minute
4. emctl upload agent.
If you still get the problem, run emctl status agent and post teh outcome here.

Get "An Error occurred while retrieving data From ProjectWebApp.." when searching content on an External Content Type

I have set-up an ECT in SPD2013 on SP2013. It is a SQL Data source called ProjectWebApp. I have BCS/SSS set-up. I can create an ECT OK in SPD. I can add the ECT to a custom list.
The problem is when I add a new item in the list the following error message appears in red
An error occurred while retrieving data from ProjectWebApp. Administrators, see the server log for more information
I cannot filter or return any results. There is data in the DB.
Another test I do is to try and create a new App/List using the "External List" template. When
I select the ECT a red message appears "External Content Types are not available". which is odd since I can add an ECT to a list as mentioned above.
Any ideas?
Tx
Andrew
Andrew Payze

Hi Andrew,
Please try the option Allow unlimited length in document libraries in the column settings:
http://littletalk.wordpress.com/2011/08/18/external-content-type-an-error-occurred-while-retrieving-data-from-a-system-administrators-see-the-server-log-for-more-information/
If it doesn't help, please refer to the link below and raise the External content type Read List operation thresholds:
http://lightningtools.com/bcs/business-connectivity-services-end-user-implications-part-one-threshold-limit-errors/
Please provide error message in ULS log for further troubleshooting.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

HT1414 My ipad has gone into recovery mode after an "error occured" whilst trying to update it. Will it come out of recovery on its own? There is a lot of data I want to save

My ipad has gone into recovery mode after an "error occured" whilst trying to update it. Will it come out of recovery on it's own? There is a lot of data I want to save before restoring it to factory settings

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

HT204003 "An error occured retrieving the Passport data. Please try again"

I can't put my movie tickets into passport."An error occurred retrieving the Passport data. Please try again" Using iphone6

I Am also having this issue. Can't add movie tickets and I can't add the scene points It was working fine until ios8.

Error: Timeout occurred whilst retrieving page meta data.????

Similar Messages

Maybe you are looking for