Error -1074118610 occurred at niUSRP Fetch Rx Data (CDB Cluster).vi

I researched this error in forum ,however, I don't reach the solutions.
Error -1074118610 occurred at niUSRP Fetch Rx Data (CDB Cluster).vi
The received data is out of sequence. This may be a symptom of overflows due to an inability to maintain streaming at the specified IQ Rate, or rearrangement of packets by an ethernet adapter or network switch.
When I start to USRP, I am taking this error 6-7 minutes later. I tried IQ Rate= 2M and samples per symbol=4 also IQ Rate is approximately 192k and samples per symbol= 20 for 9600 baud rate.

Hello ITUbahadir
I understand you are NOT testing a LabVIEW shipping example. If this is correct, Could you try to test the shipping examples? Same error? If this is incorrect, what is the name of the example?
If the problem is specific to your code, could you share it? If you are not able to do that, could you explain me what have you changed to the code?
Regards
Frank R.

Similar Messages

Error: Timeout occurred whilst retrieving page meta data.????

Hi,
I sucessfully enabled SSL on PORTAL 3.0.9.8.0 but I could only use it inside our firewall. This is because I had my servername setup to be "portal" instead of a valid DNS name like "portal.mycomp.com".
I have changes my servername from "portal" to "portal.mycomp.com" in all the conf. files that I know of and it still doesn't work. The funny thing is that I can access the single-sign-on server but not portal. For example, #1 of the following doesn't work but #2 works.
#1: https://portal.mycomp.com/pls/portal30
#2: https://portal.mycomp.com/pls/portal30_sso
This is the error msg I got from my browser when I try to go to #1 ---> "Error: Timeout occurred whilst retrieving page meta data."
I had also made sure that I didn't have any typo when I executed the ssodatan script. The following is how I executed my ssodatan script:
ssodatan -w https://portal.mycomp.com/pls/portal30/ -l https://portal.mycomp.com/pls/portal30_sso/ -s portal30 -o portal30_sso -c portal
*note: "portal" is my connect string.
Does anyone have any idea what my problem would be?
Yes, I have also re-requested a new SSL Certificate from Varisign with the new servername "portal.mycomp.com" and installed it properly.
Thanks in advance,
Victoria.

Victoria,
Did you find a solution to this ?
We are running Oracle Portal 3.0.9.8.1 on Solaris and are having
the same problem. Everything works okay through http but with
https:
1. https://<domain name>/pls/portal30
we get the error "Error: Timeout occurred whilst retrieving page
meta data."
2. https://<domain name>/pls/portal30_sso - works okay
3. https://<domain name>/test.jsp - works okay
Thanks
Simon.

Error: Timeout occurred while retrieving page meta data.

Hi,
I have 10.1.2.0.0 installed. I log into portal and time to time I keep getting the following error:
Error: Timeout occurred while retrieving page meta data.
Any ideas what might be the cause. It may work ok for sometime but all of a sudden I keep getting the above error.
Thanks

I could be the RAC, and have failovers etc. as usually this is associated with a performance issue or timeout... There should be something in the logs.
What I recommend you is that you log a Service Request into Support... and supply the PDA (Metalink Note:169490.1).
I hope it helps...
Cheers,
Pedro.

SSL. Error: Timeout occurred whilst retrieving page meta data

Hi!
I am configuring oracle 9iAS 1.0.2.2a Portal to enable SSL and I did
everything that was said at http://igloo.its.unimelb.edu.au/Webmail/tips/msg00569.html
zone.properties
servlet.page.initArgs=useScheme=http
servlet.page.initArgs=usePort=7778
servlet.page.initArgs=httpsports=4443
wdbsvr.app
[DAD_portal30]
cgi_env_list = REQUEST_PROTOCOL=HTTPS,SERVER_PORT=4443
[DAD_portal30_sso]
cgi_env_list = REQUEST_PROTOCOL=HTTPS,SERVER_PORT=4443
This was my ssodatan
ssodatan -w https://me.me.me:4443/pls/portal30/ -l
https://me.me.me:4443/pls/portal30_sso/ -s portal30 -o portal30_sso
But when I access https://me.me.me:4443/pls/portal30/ I get
Error: Timeout occurred whilst retrieving page meta data
However, https://me.me.me:4443/pls/portal30_sso/ is working fine!
One more thing. I can access my login server at
http://me.me.me:7778/pls/portal30/ and when it prompts for username and password
it uses https.
https://me.me.me:4443/pls/pors/portal30_sso.wwsso_app_admin.ls_login
Help would be greatly appreciated!

jserv.log (these lines appear many times)
[28/06/2002 17:07:03:987 GMT+03:00] page/JNI: Exception when trying to connect in 0.
[28/06/2002 17:07:03:987 GMT+03:00] page/Timeout occurred, label=page url=https://me.me.me:4443/pls/portal30/!PORTAL30.wwpob_page.show?_pageid=51
[28/06/2002 17:07:03:987 GMT+03:00] page/ContentFetcher Unexpected Exception, name=content-fetcher3
javax.net.ssl.SSLException: SSL handshake failed: X509CertChainIncompleteErr
     at oracle.security.ssl.OracleSSLSocketImpl.startHandshake(Native Method)
     at oracle.security.ssl.OracleSSLSocketImpl.startHandshake(Unknown Source)
     at HTTPClient.HTTPConnection.getSSLSocket(HTTPConnection.java, Compiled Code)
     at HTTPClient.HTTPConnection.sendRequest(HTTPConnection.java, Compiled Code)
     at HTTPClient.HTTPConnection.handleRequest(HTTPConnection.java, Compiled Code)
     at HTTPClient.HTTPConnection.setupRequest(HTTPConnection.java:3545)
     at HTTPClient.HTTPConnection.Post(HTTPConnection.java:2478)
     at HTTPClient.HTTPConnection.Post(HTTPConnection.java:2605)
     at oracle.webdb.cache.CacheHTTPConnection.getHTTPResponse(CacheHTTPConnection.java:129)
     at oracle.webdb.cache.CacheHTTPResponse.process(CacheHTTPResponse.java, Compiled Code)
     at oracle.webdb.cache.CacheHTTPConnection.common(CacheHTTPConnection.java:114)
     at oracle.webdb.cache.CacheHTTPConnection.Post(CacheHTTPConnection.java:210)
     at oracle.webdb.page.ContentFetcher.run(ContentFetcher.java, Compiled Code)
Changes to httpd.conf
<IfDefine SSL>
Port 4443
Listen 4443
</IfDefine>
<VirtualHost default:80>
</VirtualHost>
<VirtualHost default:4443>
DocumentRoot "/oas/Apache/Apache/htdocs"
ServerName me.me.me
ServerAdmin [email protected]
ErrorLog /oas/Apache/Apache/logs/error_log
TransferLog /oas/Apache/Apache/logs/access_log
SSLCertificateFile /oas/Apache/Apache/conf/ssl.crt/mycert.crt
SSLCertificateKeyFile /oas/Apache/Apache/conf/ssl.key/mycert.key
</VirtualHost>

NiUsrp Fetch Rx data band

Hi all,
the "niUsrp Fetch Rx data.vi" does output signal in baseband or in the carrier frequency set-up by the "niUSRP Configure Signal.vi"?
I will use it to make a mixer "via software", in radar application, and I have to know if the correct way for mixing Tx and Rx signals is to take directly the output of the "niUsrp Fetch Rx data.vi" or if I should downconvert this signal.
Thanks,
Giube

Hi Giube,
have you tried with the example you can find in LabVIEW? There are a couple that come up when you search for DDC, but the most appropriate for your case is probably the "niScope EX OSP Downconversion.vi.
Let me know if that can work out for you!

Data sequence to niUSRP write Tx Data

Hay all,
Currently, I'm trying to develop 802.15.4 system. I have a few question about the data sequence that being fetched into niUSRP write Tx Data.vi.
The vi (niUSRP write Tx Data) accepts IQ data from modulation block, What is the sequence for data that is being transmitted? For example, bitstream is modeled as array, which array[] is tranmitted first? The LSB, or the MSB.
The standard itself (802.15.4) specify that the least bit (C0) is transmitted first.
Thank you.

my TICC2530 has been sucessfully detected the signal, but the decoding still messy.
And I have problew, because
"niUSRP Write Tx Data (CDB Cluster).vi<ERR>Underflow: the Tx buffer was emptied before new data was provided. Consider reducing the IQ rate, increasing the Write rate, or increasing the number of samples per Write."
I already tried to change the registry, as mentioned in here Increasing-write-rate , but, I still have the problem, when I run the IQ rate > 4M and samples per symbol 4. Hence, the CC2530 won't recognize the signal, if I set the IQ rate to be 4M. This in the constelation for my custom OQPSK half sine pulse (4M, 4samples/symbol, Symbol rate 1M)
and my CC2530 will recognize the signal if I set the IQ rate 8M and samples per symbol 8, here is the constelation diagram
So, my question is, how to handle the error?

Failed to fetch pluggable data source error

I'm getting this error when creating a report that is connecting to a DB2 table using jdbc. Report builder seems to connect to the database fine, however when I attempt to compile/run the report I get the following error -
'REP-4102: Failed to fetch pluggable data source.
java.lang.AbstractMethodError: COM/ibm/db2/jdbc/app/DB2ResultSet.getStatement'
I'm using the following in my jdbcpds.conf on my local machine.
<driver name = "ibm-db2"
subProtocol = "db2"
connectString = "subProtocol:databaseName"
class = "COM.ibm.db2.jdbc.app.DB2Driver"
connection = "oracle.reports.plugin.datasource.jdbcpds.JDBCConnectionHandling"
loginTimeout = "0">
</driver>
Has anyone experienced this issue or has some insight as to what I need to do to resolve this?
TIA
Brian

Dear Oracle Reports Team,
Can you please help me out ???
Need your help in this regard urgently.
Best Regards,
Ramakrishnan L
Dear Friends,
I am encountering the following the error while running the reports.
REP-4102: Failed to fetch pluggable data source.
java.lang.NumberFormatException: 75,000000
I am using an Express Query in this case.
The same report runs perfectly when connected to the NT server that has the reports server,Http server and the rdf file.The db that the reports uses is on the SOLARIS server.
But when I use the reports server,http server and the rdf file avaiable to me on the SOLARIS server with the db also now on the same machine it does not run and gives the error.
What could be the problem ?
Just to add more clarity below is the URL which I use to display the report
NT URL(This works perfectly)
http://sa560:7778/reports/rwservlet?server=rep_sa560&report=c:\DWHReports\Man_Days_Spent.rdf&express_server="server=ora_ro_tcp:172.20.128.199/sl=-2/st=1/ct=0/st=1/"&destype=cache&desformat=htmlcss&OESHOST=172.20.128.199&SUSR_NAME='oraexp'&PASSWORD='test'
SOLARIS URL(This does not work and gives the error)
http://172.20.128.199:7778/reports/rwservlet?server=rep_gosisvr&report=Man_Days_Spent.rdf&express_server="server=ora_ro_tcp:172.20.128.199/sl=-2/st=1/ct=0/st=1/"&destype=cache&desformat=htmlcss&OESHOST=172.20.128.199&USR_NAME='oraexp'&PASSWORD='test'
Regds,
Ramakrishnan L

Grid Control - An error has occurred!

Hi!
I have trouble with my new grid control. 2 nodes work for 2 days ago, but now I got this error message:
An error has occurred!
Unable to obtain data for target node1 (and node2). The target may be down. Switching to the last 24 hrs view.
I tried to start emctl stop agent and emctl start agent on both nodes, and I also restart the grid-server. Nothing happen.
How to repair that?
Thanks
Regards
Ken

Try following:-
Re-start OMS
Then do following on both nodes:-
1. emctl stop agent
delete files in $ORACLE_HOME/sysman/log
delete files and any directoried in $ORACLE_HOME/sysman/emd/upload
delete files and any directories in $ORACLE_HOME/sysman/emd/state
delete files other than target.xml in $ORACLE_HOME/sysman/emd/ DO NOT DELETE ANY FOLDERS or TARGET.XML
2. emctl clearstate agent
3. emctl start agent
wait a minute
4. emctl upload agent.
If you still get the problem, run emctl status agent and post teh outcome here.

Firefox Version 27 Reporting Services Action Menu Error. An error has occurred with the data fetch.

Hello, since I've updated to Firefox 27.0.1 on Windows 7, I'm encountering a problem with Reporting Services on a Sharepoint site. It is a Sharepoint 2010 site with SQL Server Reporting Services 2012 Sharepoint Integrated mode. I was previously on Firefox version 26 and didn't encounter this problem.
When a report is open and you use the Actions link on the Reporting Services toolbar, I receive the following error messages.
An error has occurred with the data fetch. Please refresh the page and retry.
I've tried updating to Firefox 28 beta but the same error occurs. I see another user is having the same problem here. http://sharepoint-community.net/forum/topics/reporting-service-and-firefox-27
Any help would be appreciated. Thanks!
Ryan

Rachel, I did perform the Sharepoint file alteration discussed in the other article and it did stop Firefox from producing the error. I've done some testing on some other browsers and have yet to encounter any problems with the fix however I'm hesitant to perform that workaround in a production environment.
Thanks for looking.
Ryan

Exception occured in OraOLEDB: Accessor is not a parameter accessor. in NI_Database_API.lvlib:Rec Fetch Recordset Data (R).vi- NI_Database_API.lvlib:Rec Fetch Recordset Data (CR).vi-

I have a sql query that run directly in the database but when I attempt to run it in labview using the create_parameterized_query.vi I and fetch_recordset_data.vi get the following error:
Error -2147217845 occurred at NI_Database_API.lvlib:Rec Fetch Recordset Data (R).vi->NI_Database_API.lvlib:Rec Fetch Recordset Data (CR).vi
Exception occured in OraOLEDB: Accessor is not a parameter accessor. in NI_Database_API.lvlib:Rec Fetch Recordset Data (R).vi->NI_Database_API.lvlib:Rec Fetch Recordset Data (CR).vi->
I've been using the tracer utility to try to see what the problem is but so far I haven't been able to figure out the problem. I have several other tables in my database that I'm pulling data from and this same structure and they run without any problems.
I'm enclosing my .vi
Thanks
Attachments:
Bottom_contact(SubVI).vi ‏21 KB

Hi montyponty,
According to a Google search it looks like error 2147217845 shows up a couple of times with Oracle databases. Does the following page offer any helpful suggestions:
http://forums.devx.com/showthread.php?t=47596
From which VI does the error originate from? Can you post the other code that does work so we have a comparison?
Joshua B.
National Instruments
NI Services
NI Support Resources
NI Training Resources

Getting Error -1074118632 occurred at niScope Multi Fetch WDT.vi

Hi,
I was trying to use PXIe-5122 digitizer to simultaneously acquiring data from two analogue input channels at 20 MS/s sampling rate (my signal is at 2MHz). I use Express NI SCOPE VI to setup the continuous acquisition, with read length set to 50000. But, I keep getting the following error:
Error -1074118632 occurred at niScope Multi Fetch WDT.vi
Possible reason(s):
The requested data has been overwritten in memory so it is no longer available for fetching.
When I reduced the sampling rate to 2 MS/s, this error never comes back. But, I do need a high sampling rate and small read length per cycle in order to do a real time signal processing. Is there anything you suggest to do in order to solve this issue?
Thanks,
-Roger

There is a dedicated board for digitizers at http://forums.ni.com/t5/High-Speed-Digitizers/bd-p/150 that would be more appropriate for your question.
The first thing I would suggest is to use the lower level functions and avoid some of the overhead of an Express VI. You haven't shown your code but the processing may have to be moved to a consumer loop.

REP-1401: Fatal PL/SQL error occurred. ORA-01403: no data found

Hi guys,
I am getting error 'REP-1401: Fatal PL/SQL error occurred. ORA-01403: no data found ' when run the report
and i m also use formula column in my report.
can any body help me why it's coming.
following code is used in formula column plz check and verify:
function CF_3Formula return Char is
T1 VARCHAR2(100);
begin
SELECT
     VAT_REG_NO INTO T1
FROM
     JA_IN_HR_ORGANIZATION_UNITS JIHOU,
     HR_LOCATIONS HL--,
     --MTL_TXN_REQUEST_HEADERS MTLH
WHERE
JIHOU.ORGANIZATION_ID=HL.INVENTORY_ORGANIZATION_ID AND
JIHOU.LOCATION_ID=HL.LOCATION_ID AND
--Jihou.ORGANIZATION_ID = Mtlh.Organization_Id AND
-- Hl.INVENTORY_ORGANIZATION_ID =Mtlh.Organization_Id AND
-- MTLH.ATTRIBUTE10=SUBSTR(HL.LOCATION_CODE,1,3) AND
SUBSTR(HL.LOCATION_CODE,1,3)= :TO_ORG1 ;
RETURN (T1);
end;
plz help me out.

Hi;
What is EBS version? Is it custom report or not?
See below which is mention similar errors
Autoinvoice Error: ORA-1403: no data found [ID 1209403.1]
APXIIMPT - Payable Open Interface Import Fails on "REP-1401: 'cf_source_nameformula': Fatal PL/SQL error occurred. ORA-01403: no data found" [ID 222058.1]
Regard
Helios

Error when Fetching CATs Data to BI

Hi,
I have created data source in R/3 System (Source System) for CATS data and extracting data Using function Module. Using transaction RSA3 it is fetching all the desired records in R/3 System.
In BI System extracting Full Data and when monitoring it is throwing Error.
Error 7 when sending an IDoc
Error when opening an RFC connection    2
Error when opening an RFC connection
Errors in source system
Function Module for fetching CATS Data
FUNCTION ZLBTIME_GET_CATSREC.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*"     VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*"     VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*"     VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*"      I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*"      E_T_DATA STRUCTURE ZLSCATS OPTIONAL
*" EXCEPTIONS
*"      NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
* Example: DataSource for table SFLIGHT
* TABLES: SFLIGHT.
* Auxiliary Selection criteria structure
DATA: L_S_SELECT TYPE SRSC_S_SELECT.
* Maximum number of lines for DB table
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
* counter
          S_COUNTER_DATAPAKID LIKE SY-TABIX,
* cursor
          S_CURSOR TYPE CURSOR.
* Select ranges
** RANGES: L_R_CARRID FOR SFLIGHT-CARRID,
**          L_R_CONNID FOR SFLIGHT-CONNID.
* Initialization mode (first call by SAPI) or data transfer mode
* (following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
* Initialization: check input parameters
*                 buffer input parameters
*                 prepare data selection
* Check DataSource validity
    CASE I_DSOURCE.
      WHEN 'ZLTIME_DS_3'.
      WHEN OTHERS.
        IF 1 = 2. MESSAGE E009(R3). ENDIF.
* this is a typical log call. Please write every error message like this
        LOG_WRITE 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                  I_DSOURCE   "message variable 1
                  ' '.                 "message variable 2
        RAISE ERROR_PASSED_TO_MESS_HANDLER.
    ENDCASE.
    APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
* Fill parameter buffer for data extraction calls
    S_S_IF-REQUNR    = I_REQUNR.
    S_S_IF-DSOURCE = I_DSOURCE.
    S_S_IF-MAXSIZE   = I_MAXSIZE.
* Fill field list table for an optimized select statement
* (in case that there is no 1:1 relation between InfoSource fields
* and database table fields this may be far from beeing trivial)
    APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE.                 "Initialization mode or data extraction ?
* Data transfer: First Call      OPEN CURSOR + FETCH
*                Following Calls FETCH only
* First data package -> OPEN CURSOR
    IF S_COUNTER_DATAPAKID = 0.
* Fill range tables BW will only pass down simple selection criteria
* of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
**      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CARRID'.
**        MOVE-CORRESPONDING L_S_SELECT TO L_R_CARRID.
**        APPEND L_R_CARRID.
**      ENDLOOP.
**      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CONNID'.
**        MOVE-CORRESPONDING L_S_SELECT TO L_R_CONNID.
**        APPEND L_R_CONNID.
**      ENDLOOP.
* Determine number of database records to be read per FETCH statement
* from input parameter I_MAXSIZE. If there is a one to one relation
* between DataSource table lines and database entries, this is trivial.
* In other cases, it may be impossible and some estimated value has to
* be determined.
**      OPEN CURSOR WITH HOLD S_CURSOR FOR
**      SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
**                               WHERE CARRID IN L_R_CARRID AND
**                                     CONNID IN L_R_CONNID.
        OPEN CURSOR WITH HOLD s_cursor FOR
*        SELECT * FROM zlvctmbw.
        SELECT a~counter a~pernr a~workdate a~skostl a~lstar a~rproj a~awart a~kokrs a~meinh a~tcurr a~price
               a~unit a~bukrs a~ersda a~erstm a~ernam a~laeda a~laetm a~status a~refcounter a~reason a~belnr
               a~catshours a~act1 a~act2 a~task a~lang1 a~narr1 a~lang2 a~narr2 a~cmnt a~clst a~plchl
               b~ltxa1 b~transfer b~hrkostl b~hrlstar b~hrcostasg b~statkeyfig b~catsquantity b~bemot
               c~pspnr c~pspid
               d~kunnr
        FROM   catsdb AS a
        LEFT OUTER JOIN catsco AS b ON a~counter = b~counter
        JOIN   prps AS p ON p~pspnr = a~rproj
        JOIN   proj AS c ON c~pspnr = p~psphi
        JOIN   zltproj AS d ON d~pspnr = c~pspnr.
    ENDIF.                             "First data package ?
* Fetch records into interface table.
*   named E_T_'Name of extract structure'.
    FETCH NEXT CURSOR S_CURSOR
               APPENDING CORRESPONDING FIELDS
               OF TABLE E_T_DATA
               PACKAGE SIZE S_S_IF-MAXSIZE.
    IF SY-SUBRC <> 0.
      CLOSE CURSOR S_CURSOR.
      RAISE NO_MORE_DATA.
    ENDIF.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.              "Initialization mode or data extraction ?
ENDFUNCTION.
When fetching data using VIEW in source system it works fine.
When testing for fetching data of SFLIGHT using function module ZRSAX_BIW_GET_DATA_SIMPLE
made a copy of RSAX_BIW_GET_DATA_SIMPLE, it is working fine.
Pls suggest the cause of error.
Regards
Vishal

Hello Praveen,
Connection is fine as I tried fetching data of SFLIGHT using standard template function module which works fine and in transaction sm58 I do not any data.
Regards
Vishal

SAP MII 14.0 SP5 Patch 11 - Error has occurred while processing data stream Dynamic Query role is not assigned to the Data Server

Hello All,
We are using a two tier architecture.
Our Corp server calls the refinery server.
Our CORP MII server uses user id abc_user to connect to the refinery data server.
The user id abc_user has the SAP_xMII_Dynamic_Query role.
The data server also has the checkbox for allow dynamic query enabled.
But we are still getting the following error
Error has occurred while processing data stream
Dynamic Query role is not assigned to the Data Server; Use query template
Once we add the SAP_xMII_Dynamic_Query role to the data server everything works fine. Is this feature by design ?
Thanks,
Kiran

Thanks Anushree !!
I thought that just adding the role to the user and enabling the dynamic query checkbox on the data server should work.
But we even needed to add the role to the data server.
Thanks,
Kiran

Error 7 occurred at Open/Create/Replace File in Open Config Data.vi

I have a .vi that was working fine with Labview 7.0. I now have upgraded to Labview Professional 8.0, and I am trying to build a stand alone executable. When I build the executable, build an installer, and then try to install it on another computer then run it......... I get the "Error 7 occurred at Open/Create/Replace File in Open Config Data.vi" error. Any ideas?

Hello,
In addition to the LabVIEW Help, there is an Application Note on Distributing Applications with the LabVIEW Application Builder and a knowledge base article What Is The Build Specification Feature In Application Builder? that might be helpful.
Also, here
is a knowledge base article on what Dennis has described and it
provides an example to call an extra Strip Path function. Also, instead
of using a Match Pattern function, you could use the App.Kind property
node (use Open Application Reference, Property Node: Application ->
Kind, and Close Reference) to determine if you are running in a
Run-time system.
Good luck and best regards,
Shakhina P.
Applications Engineer
National Instruments

Error -1074118610 occurred at niUSRP Fetch Rx Data (CDB Cluster).vi

Similar Messages

Maybe you are looking for