Error Type unknown address 00083578

Hi,
Does anyone know what "Error Type unknown address 00083578" means?
Thanks

Hi,
As for the other error message I posted, It's happens apparently randomly (although nothing is random, it's just that I can't identify the pattern) when I use "debug VBS script".
I didn't save a print screen, if I get it again I'll post a print screen

Similar Messages

  • Error while executing "" command Error type ACCESS VIOLATION Error Address: 0006898E Module name:gfsdesk.DLL

    Hi All,
    I'm using diadem from .net Program. While on the run I'm getting the following error.
    Error While executing "" Command
    Error type ACCESS VIOLATION
    Error Address: 0006898E
    Module name:gfsdesk.DLL
    Anyone have any idea why this is happening?
    regards,
    Swaroop

    Hi Swaroop,
    It would be helpful to better understand what your code really does. The information that you called DIAdem from your enviroenment is not yet sufficient to understand what the problem might be.
    Andreas

  • IPhone 6 Plus 16GB blue screen crashes: Read, error type:Address map hole or size mis-match

    Hi folks,
    Some time ago I had a 16GB 6+ and it crashed with the blue screen, so I returned it. I now have a brand new one that I got from Tmobile ($75 return fee) and although it has mostly worked just fine, I have gotten 2 blue screen crashes. Below are the details from the phone's log.
    What strikes me is the message "Read, error type:Address map hole or size mis-match".
    Does anyone know if this could be caused by a hardware defect?
    I've gotten one of these crashes running iOS 8.1.2 and another in 8.1.3.
    Thanks.
    Incident Identifier: 20304759-E90B-453F-BDC5-176AF4E30041
    CrashReporter Key:   fcf18d230005749957728546dea3221a0c588330
    Hardware Model:      iPhone7,1
    Date/Time:           2015-01-25 19:43:44.913 -0800
    OS Version:          iOS 8.1.2 (12B440)
    panic(cpu 0 caller 0xffffff8008cd45d0): L2C PIO error (src:core0-AF snoop, address:0x1202030208, access:Read, error type:Address map hole or size mis-match, L2C_ERR_STS:100003fc00000202, L2C_ERR_ADR:0x1108e1202030208, L2C_ERR_INF:0x2107)
    Debugger message: panic
    OS version: 12B440
    Kernel version: Darwin Kernel Version 14.0.0: Mon Nov  3 22:27:30 PST 2014; root:xnu-2783.3.22~1/RELEASE_ARM64_T7000
    iBoot version: iBoot-2261.3.33
    secure boot?: YES
    Paniclog version: 3
    Kernel slide:     0x0000000006000000
    Kernel text base: 0xffffff8008002000
    Epoch Time:        sec       usec
      Boot    : 0x54bc22ef 0x00000000
      Sleep   : 0x54c58398 0x0002abb4
      Wake    : 0x54c583ae 0x000f08df
      Calendar: 0x54c5b7e3 0x00025045

    same with my iPhone 4s 16gb
    {"os_version":"iOS 8.1.3 (12B466)","bug_type":"110"}
    Incident Identifier: 582496DB-6999-468C-9504-3D1C191B9F4B
    CrashReporter Key: 623a577555e51ed110b937358adfa66fba3ea447
    Hardware Model: iPhone4,1
    Date/Time: 2015-02-20 04:17:50.830 +0300
    OS Version: iOS 8.1.3 (12B466)
    panic(cpu 0 caller 0x83dc8347): "i2c1::_checkBusStatus Bus is still in a bad state; last write status 00010110 xfer 00000000 fifo 00000000 for device als"
    Debugger message: panic
    OS version: 12B466
    Kernel version: Darwin Kernel Version 14.0.0: Mon Jan 12 21:30:11 PST 2015; root:xnu-2783.3.26~3/RELEASE_ARM_S5L8940X
    Kernel slide: 0x0000000003400000
    Kernel text base: 0x83401000
    Boot : 0x54e68884 0x00000000
    Sleep : 0x54e68a7e 0x000dd6ac
    Wake : 0x54e68b19 0x00035c02
    Calendar: 0x54e68b1d 0x00040927
    Panicked task 0x84a87c60: 13773 pages, 122 threads: pid 0: kernel_task
    panicked thread: 0xc5066e80, backtrace: 0x81a33ca0
    0x834ad94d
    0x834adcb1
    0x8341d5bd
    0x83dc8347
    0x83dc8059
    0x83dc7e35
    0x8389c601
    0x8389c513
    0x836f6f65
    0x8389cc6d
    0x8389ccc5
    0x83a9f18d
    0x83a9c27f
    0x83a9c73f
    0x83a9c90d
    0x836f6f65
    0x83a9c8e5
    0x836e91e7
    0x8343ed9b
    0x834ab59c
    Task 0x84a87c60: 13773 pages, 122 threads: pid 0: kernel_task
    Task 0x84a87948: 771 pages, 3 threads: pid 1: launchd
    Task 0x84a87000: 2016 pages, 13 threads: pid 17: UserEventAgent
    Task 0x84a87630: 481 pages, 4 threads: pid 18: misd
    Task 0x84a87318: 4114 pages, 22 threads: pid 19: CommCenter
    Task 0x87a62948: 349 pages, 2 threads: pid 21: keybagd
    Task 0x87a62318: 574 pages, 4 threads: pid 23: iaptransportd
    Task 0x87a62000: 868 pages, 9 threads: pid 24: configd
    Task 0x87a7ac60: 793 pages, 4 threads: pid 25: lockdownd
    Task 0x87a7a948: 1218 pages, 6 threads: pid 26: imagent
    Task 0x87a7a630: 2771 pages, 4 threads: pid 27: atc
    Task 0x87a7a318: 792 pages, 2 threads: pid 28: fairplayd.H1
    Task 0x87a7a000: 1571 pages, 14 threads: pid 29: aggregated
    Task 0x87c4ac60: 1069 pages, 4 threads: pid 30: routined
    Task 0x87c4a318: 707 pages, 5 threads: pid 33: timed
    Task 0x87d23c60: 646 pages, 2 threads: pid 35: installd
    Task 0x87d23948: 2383 pages, 11 threads: pid 36: mediaserverd
    Task 0x87d23318: 1279 pages, 11 threads: pid 38: ubd
    Task 0x87d23000: 249 pages, 7 threads: pid 39: syslogd
    Task 0x87d6ac60: 410 pages, 2 threads: pid 40: softwareupdated
    Task 0x87d6a948: 851 pages, 5 threads: pid 41: mediaremoted
    Task 0x87d6a630: 1877 pages, 7 threads: pid 42: identityservices
    Task 0x87d6a318: 9938 pages, 16 threads: pid 43: SpringBoard
    Task 0x87d6a000: 453 pages, 2 threads: pid 44: fileproviderd
    Task 0x87e25c60: 609 pages, 4 threads: p

  • 5.1.0 - Unknown address error 554-'5.7.1 Access denied'

    Hi
    Over the last 5 days I my users have been getting alot of undeliverable's on delivery notifications:
    Subject: Delivery Status Notification (Failure)
    From: "Mail Delivery System" <[email protected]>
    Date: Sat, March 14, 2009 08:33
    To: SRS0=YH6uMo=7N=mydomain.com=[email protected]
    The following message to <[email protected]> was undeliverable.
    The reason for the problem:
    5.1.0 - Unknown address error 554-'5.7.1 Access denied'
    The original email is gettting through, its just we get an undeliverable on the delivery notification. All users use BIS with various providers, Orange UK, Vodacom SA, Vodafone UK. All the undeliverable are to internal domains the problem doesn't seem to occur with external domains.
    Can anyone help me please ?
    Thanks
    Kev

    Hi
    Anyone able to help me please ?
    Kev

  • Why am I suddenly receiving the message: 5.1.0 - Unknown address error 501-"5.1.8 Bad sender's system address" I am only getting it for Mozilla Thunderbird

    In the past three days, whenever I send a message, it does not go through. Instead, I get the message: 5.1.0 - Unknown address error 501- "5.1.8 Bad sender's system address". I tried downloading the newest version of Thunderbird but it did not work. I do not receive this message when using other software.

    I had the look that you suggested. As far as I can tell there are no problems with the user name. Maybe I should check with my email company, Cogeco?

  • Importing .mov "Unsupported File Type : Unknown format" error

    I have a .avi video from a camera and wanted to burn to a dvd to watch on dvd player. I converted the video to .mov but when I dragged into iDVD I received an error stating "Unsupported File Type : Unknown format". I converted to a .mp4 hoping that might work and had the same error. As far as I remembered .mov and .mp4 should work in iDVD and iMovie but I had the same error in both programs.
    Converted to .mov with iSquint, and to .mp4 with Quicktime.
    Any suggestions?

    hi,
    thank you for responding...  i followed your instructions and this is what comes up when i try to open the movie:
    QuickTime Player can't open_______.mov
    To see if additional software is available that will enable QuickTime Player to open the movie, click Tell Me More.
    i've done nothing different with this movie.  it's the 2nd part of a longer project that i had to break into two parts.  the first part was successfully burned to disk.  i'm at a loss as to why this one is 'different' and why anything else might be required to make it work properly.
    btw, here's the info from the entire project: 
    format: DV/DVCPRO - NTSC, 720 x 480 (853 x 480)
    Linear PCM, 16 bit little-endian signed integer, 2 channels, 48000 Hz
    fps: 29.97
    data size: 42 GB
    data rate: 30.31 Mbit/s
    current size: 853 × 480
    rsvp...
    ~ tj

  • Unknown error in reservation system (API error type A code 3)

    Good Day
    I hope someone can give me some info for the following error.
    I create a travel plan and when I click on Book I do some times get the following error
    "Unknown error in reservation system (API error type A code 3)"
    Can anyone please assist, as this does not always happens.
    Regards
    Jaco Nel

    MONO PKGBUILDs have a number of unique requirements. Have a look at some of the official ones, like Banshee itself, or F-spot, for example.

  • Replicat  : GGS ERROR    171  Unknown data type received 0x54 49 .

    I am trying to run an initial load as shown in the tutorial at http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/goldengate/11g/GGS_Sect_Config_WinUX_ORA_to_WinUX_ORA.pdf and I am seeing this error in the REPLICAT process.
    I have tried using the SOURCEDEFS clause as well (Even though the source and Target structures are exactly similar), but I run into the same issue.
    ** Run Time Messages **
    *2011-04-14 12:02:15 GGS ERROR 171 Unknown data type received <0x54 49>.*
    The only other Indication that I see in the report file is the following Warning message
    *2011-04-14 12:02:15 GGS WARNING 201 Rounding up LOBWRITESIZE 32528 to be a multiple of LOB chunk size (16324).*
    LOBWRITESIZE = 32648 bytes.
    Here are the other details. If you need any more information, please let me know
    GoldenGate Delivery for Oracle
    Version v9.5.1.31 Build 003
    HP-UX 11.23 (optimized 64-bit), Oracle 10g on Jun 24 2008 13:43:23
    Copyright GoldenGate Software, Inc. 1995-2008
    Starting at 2011-04-14 12:02:09
    Database Version:
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
    PL/SQL Release 10.2.0.4.0 - Production
    CORE 10.2.0.4.0 Production
    TNS for HPUX: Version 10.2.0.4.0 - Production
    NLSRTL Version 10.2.0.4.0 - Production
    I'd appreciate any advice on fixing this issue.
    Thanks,
    Rajesh.

    Looks like the error is because we have ASM set up at our place.. and I did not pay enough attention to this part of the tutorial Guide..
    Note: When Oracle Automatic Storage Management (ASM) is in use, the TRANLOGOPTIONS ASMUSER and ASMPASSWORD must be set in the Extract parameter file. For more information refer to the GoldenGate for Windows & UNIX Administrator and Reference manuals.
    Posting the reply here so that It'd be useful for anyone running into the same issue later.
    Cheers!
    Rajesh.

  • Save Error: File Type Unknown

    Ok So here it is
    I've been working on a project all day, saving all along and suddenly at the end of the day I go to save one last time and I get an error of "Save Error: File Type Unknown". At first I thought there was an unsupported file type somewhere in the project so I searched out all my non-video elements and they all checked out OK.
    I then started shutting down the machine at lunch and that seemed to remedy the problem at first, but now I get the error at least 6 times a week - VERY frustrating. I've tried doing save as, which results in either a full crash or the same error.
    I thought that maybe somehow the constant frames files were getting corrupted during the course of editing some how and started trashing those - no change still get the error.
    Also I am editing HDV and rendering out ProRes. So far no one has been able to help So I'm turning to you guys!
    Thanks guys!!

    I created a duplicate of my application on apex.oracle.com - the problem happens under APEX 4.0 as well...
    It might be easier to see what is happening here.
    WORKSPACE: SEATTLE_WAVE
    USER: testuser
    PASSWORD: mypassword10
    Thank you
    --rolf                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Unknown address error message

    I cannot send a photo, it comes back again with the message unknown address. Can some kind soul please tell me why.

    Because the server was not recognized. I doubt if that had anything to do with a photo.
    Barry

  • Asysnc IO Error: 14: Bad address

    Hello,
    We are using RHEL4.0 x84_64 Linux system. Oracle 10.2.0.3 database runs on it. We try to run our database as async IO.
    We are using veritas vxfs file system type.
    After set the oracle parameter filesystemio_option to setall, we got an error from db also from OS.
    Database error message belov;
    ORA-19502: write error on file "/home/db/log01/1_42895_629465220.dbf", blockno 131073 (blocksize=512)
    ORA-27061: waiting for async I/Os failed
    Linux-x86_64 Error: 14: Bad address
    Additional information: -1
    Additional information: 1048576
    ORA-19502: write error on file "/home/db/log01/1_42895_629465220.dbf", blockno 131073 (blocksize=512)
    ARC1: I/O error 19502 archiving log 6 to '/home/db/log01/1_42895_629465220.dbf'
    ARCH: Archival stopped, error occurred. Will continue retrying
    Sun Oct 26 08:55:50 2008
    dmesg error message;
    Vendor: EMC Model: SYMMETRIX Rev: 5772
    Type: Direct-Access ANSI SCSI revision: 04
    SCSI device sdc: 238540800 512-byte hdwr sectors (122133 MB)
    SCSI device sdc: drive cache: write through
    SCSI device sdc: 238540800 512-byte hdwr sectors (122133 MB)
    SCSI device sdc: drive cache: write through
    sdc: unknown partition table
    Attached scsi disk sdc at scsi0, channel 0, id 1, lun 147
    Attached scsi generic sg2 at scsi0, channel 0, id 1, lun 147, type 0
    Vendor: EMC Model: SYMMETRIX Rev: 5772
    Type: Direct-Access ANSI SCSI revision: 04
    SCSI device sdd: 238540800 512-byte hdwr sectors (122133 MB)
    SCSI device sdd: drive cache: write through
    SCSI device sdd: 238540800 512-byte hdwr sectors (122133 MB)
    SCSI device sdd: drive cache: write through
    sdd: unknown partition table
    Attached scsi disk sdd at scsi0, channel 0, id 1, lun 149
    Attached scsi generic sg3 at scsi0, channel 0, id 1, lun 149, type 0
    Vendor: EMC Model: SYMMETRIX Rev: 5568
    Type: Direct-Access ANSI SCSI revision: 03
    SCSI device sde: 15360 512-byte hdwr sectors (8 MB)
    SCSI device sde: drive cache: write through
    SCSI device sde: 15360 512-byte hdwr sectors (8 MB)
    SCSI device sde: drive cache: write through
    sde: unknown partition table
    Attached scsi disk sde at scsi0, channel 0, id 2, lun 0
    Attached scsi generic sg4 at scsi0, channel 0, id 2, lun 0, type 0
    lpfc 0000:12:02.0: 0:0203 Nodev timeout on NPort x144d00 Data: x822 x1 x0
    VxDMP5: unknown partition table
    VxDMP6: unknown partition table
    VxDMP1: p1 p2 p3 p4 < p5 >
    VxDMP1: p1 p2 p3 p4 < p5 >
    VxDMP1: p1 p2 p3 p4 < p5 >
    VxDMP1: p1 p2 p3 p4 < p5 >
    SCSI device sdc: 238540800 512-byte hdwr sectors (122133 MB)
    SCSI device sdc: drive cache: write through
    sdc: sdc3 sdc8
    VxDMP6: p3 p8
    VxDMP1: p1 p2 p3 p4 < p5 >
    VxDMP1: p1 p2 p3 p4 < p5 >
    Can you help me ?

    Have a look at metalink Note:395350.1
    Basically, this document describes it's a problem in DIO (direct IO), which can be tuned using vxtunefs (per filesystem).
    The document describes to enlarge the buffer bigger than the described number (which is 1MB)
    dynamically: vxtunefs -o discovered_direct_iosz=1572864 /mount/point (replace /mount/point with the oracle mount point(s))
    statically in /etc/vx/tunefstab: /dev/vx/dsk/oracle/oravol discovered_direct_iosz=1048577 (replace with your oracle filesystems)

  • After upgrading to Yosemite, Thunderbird does not recognize email addresses: "syntax error" in recipient address. Fix?

    After upgrading to IOS Yosemite, Thunderbird will no longer send emails to the contacts in my history file that drops down when I "write" a new message. I continue to get a return response that there is a syntax error in the address field of the message although I have tried both my stored emails and manually typed email addresses. What has been changed and how do I recover the use of Thunderbird's great program?
    By the way, how do I eliminate out of date email addresses from popping up and populating email responses rather than the most current ones that are in my contacts? I now have to type each one in separately as the default options that come up are many out of date.
    Thanks much for your great work. Mozilla and Firefox are the best.

    Did you find a solution to this issue?  My mail server is doing the same thing.  I've tried six migrations now, and have a couple of tickets open, but they all have issues.  I have worked around all of them except the mail server problem.
    I did some more digging; the problem appears to be that on a migrated server, it leaves all of your mail store in the old location, doesn't move it, and then doesn't appear to upgrade spam-assassin properly.  The net effect is that the mail server gets the SMTP communication, tries to pass the message into spam assassin, and then it goes south.
    I see errors like this littered in the logs:
    Jul 31 13:53:10 mail org.amavis.amavisd[5927]: bayes: cannot open bayes databases /var/amavis/.spamassassin/bayes_* R/O: tie failed:
    Jul 31 13:53:10 mail org.amavis.amavisd[5927]: bayes: cannot open bayes databases /var/amavis/.spamassassin/bayes_* R/O: tie failed: No such file or directory
    Do you see anything similar?

  • And again "The error was: Unknown alias" on incoming emails

    Good day for all
    I have read all topics about this error, search Google, this forums.
    My environment:
    Windows 2008 STD SP2 ENG
    MOSS 2007 SP2 + April 09 CU ENG
    Exchange 2007 + all recent rollup
    AD Windows 2003 Native
    Exchange, MOSS and DC is a dedicated servers for each.
    For this moment, I have use only mail-enabled lists, and all was working excelent. But now I need use mail-enabled groups (distribution groups). First that I did, is enable mail for Owners group of some test site.
    Group is created in OU, and all members is in place. I have try add and delete users from that group in MOSS - all changes replicated to AD's group.
    Then I try to send mail to that group, in MOSS log I found this errors:
    08/02/2009 22:49:12.22  OWSTIMER.EXE (0x0BA0)                    0x02F0 Windows SharePoint Services    E-Mail                         6873 Warning  An error occurred while processing the incoming e-mail file c:\inetpub\mailroot\drop\ec9ec1a901ca13a100000001.eml. The error was: Unknown alias.. 
    08/02/2009 22:49:12.22  OWSTIMER.EXE (0x0BA0)                    0x02F0 Windows SharePoint Services    E-Mail                         6871 Information The Incoming E-Mail service has completed a batch.  The elapsed time was 00:00:00.0029298.  The service processed 1 message(s) in total.  Errors occurred processing 1 message(s): Message ID: [email protected]   The following aliases were unknown: owners 
    When I execute command stsadm -o refreshdms -url http://sps-lab/sites/test I have another error:
    Error in the application.
    Same error and for -o refreshsitedms command. 
    Account for WSS Timer service and for Central Administration Application pool account is the same. This account member of Administrators group in a MOSS Server and has full control on OU.
    I was try setup 3 diffrent servers with MOSS - no luck, same error on each.
    Additional information:
    Using Reflector, i'm disasemble the refreshdms command. Then I run method's code in my custom application, i've got error Access Denied.
    Code:
    static void Main(string[] args)
    //using (SPSite site = new SPSite())
    Uri requestUri = new Uri("http://sps-lab/sites/test");
    SPWebApplication application = SPWebApplication.Lookup(requestUri);
    if (application == null)
    throw new FileNotFoundException(SPResource.GetString("WebApplicationLookupFailed", new object[] { requestUri.OriginalString }));
    foreach (SPSite site in application.Sites)
    site.RefreshEmailEnabledObjects();//Error is here
    return;
    Error:
    {"Server was unable to process request. ---> Access is denied.\n"}
    Inner StackTrace:
       at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
       at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
       at Microsoft.SharePoint.DirectorySoap.SPDirectoryManagementProxy.ModifyDistributionGroup(String Alias, String Name, String Description, String ContactCN, RequestInfo Info, DistributionGroupFlags Flags)
       at Microsoft.SharePoint.SPGroup.ChangeDMS(String dlAlias, String newFriendlyName, String newDescription, String requestor, Int32& jobId)
    That can i do more for troubleshooting?

    Hi,
    You mentioned that Central Administration Application pool account is a member of Administrators group in a MOSS Server and has full control on OU, but I am not sure how is the content application pool configured.
    If the content application pool account was not the same with Central Administration Application pool account, please make sure:
    Grant content application pool account with Design permission to Distribution Groups list in Central Administration > Operations > Approve/reject distribution groups.
    Follow the step by step guidance to configure the incoming mail:
    Configure incoming e-mail settings (Office SharePoint Server) (http://technet.microsoft.com/en-us/library/cc262947.aspx)
    After successful configured the DMS enabled incoming mail, you should see a request record when assigned a email address to a SharePoint group in Approve/reject distribution groups page and the group would be created automatically if the request was approved.
    Hope the information can be helpful.
    -lambert
    Sincerely,
    Lambert Qin | Microsoft TechNet Managed Forum Support
    Posting is provided "AS IS" with no warranties, and confers no rights.

  • Error An unknown error has occurred when adding email to Apple ID

    I am trying to merge two Apple ID's into one. On one I changed the primary email address to an unused email address so I can take the former primary email address and add that email adress to the second Apple ID. When I try to add the email address that used to be the primary email address of the first Apple ID to the second Apple ID (either as a change to the main email address or add a secondary email address) I get the error "An unknown error has occurred." When I go back into the first Apple ID it will add that original email address as a primary or secondary account without any issues. But I get the same error if I try and add that original email address to any other Apple ID (I even tried adding it to a third Apple ID). It would appear that an email address used as an Apple ID cannot be used with any other Apple ID account. Is that correct?

    Apple’s having trouble with the Mac App Store and iTunes App Store right now. Try again later.
    (123845)

  • IDVD: Files exported from iMovie 11, one works, one "Unsupported File Type : Unknown format"

    I used footage from the same camera (taken on the same weekend using the same settings) in several different iMovie "projects". All were shared from iMovie 11 as "File" using the quality setting "SD 480p".
    In Quicktime Player, all ".mp4" files will play and they show the following info in its inspector:
    Format: H.264, 854 x 480
                  AAC, 48000 Hz, Stereo (L R)
    FPS: 29.97
    One exported file will drag, drop, and burn in iDVD just fine. The other two files show the error "Unsupported File Type : Unknown format" as soon as I try and drag them into iDVD.
    The only difference I can find is that the one file that works is about 803MB, while the files that don't work are 1.87GB and 3.98GB.
    All files and the iDVD project are in the same folder on my startup volume. I've tried deleting com.apple.idvd but that didn't help. I've tried rebooting and starting the iDVD project from scratch but I get the same results.
    Mac OS 10.9.1
    iMovie 10.0.1
    iDVD 7.1.2
    Any ideas?

    Hello Bengt and thank you again for the replies.
    As I mentioned in my previous posts, I'm using iMovie 10.0.1 which has very limited quality adjustments. In every case I chose the smallest size, which iMovie 10.0.1 calls "SD 480p (854 x 480)". I used this same setting on all exports.
    I still have iMovie HD (6.0.4) and iMovie '11 (9.0.9) on my iMac so I tried both of them. In both cases, they could import only the file that works in iDVD. Both older versions of iMovie choked on the longer movies shared from iMovie 10.0.1.
    I have many many hours into the editing of these clips and I do not want to have to go back and redo everything in an older version of iMovie. Might I be better off going with a different DVD creation software? Or am I out of luck? Because I can't really change iMovie 10.0.1's export settings, I'm afraid there's nothing I can do to get it to export it as something that iDVD can use (really, I can't even tell why it's different and why iDVD doesn't like it).
    The software "WonderShare DVD Creator" has no issue with any of the files I've exported from iMovie 10.0.1.    

Maybe you are looking for