Error: "Unable to enable Debugging"
I have installed weblogic 8.1 and when trying to run a sample application of portal been provided with it, it is giving error "Unable to enale debugging. Verify that your webapp deployed correctly"....
Can any one pls suggest a cure .....
Thanks,
Rahul.
Thanks.
One of my concerns is that this change will update the .work file with some local values such as host name and port number, etc. For some reason we could not use a generic name such as "localhost" in our development. This causes a little problem since the .work file contains some hard coded parameters can not be shared amoung other developers.
Hopefully there is another better solution.
Thanks again for the help!
Similar Messages
-
"Unable to enable debugging" within Workshop 8.1
I'm testing a portal application with workshop 8.1. When I started the .portal, I got this error "Unable to enable debugging. Verify that you webapp deployed correctly". If I choose to start without debugging it's OK.
The deployment was successfully done without error. Is there anything else I can check?
ThanksThanks.
One of my concerns is that this change will update the .work file with some local values such as host name and port number, etc. For some reason we could not use a generic name such as "localhost" in our development. This causes a little problem since the .work file contains some hard coded parameters can not be shared amoung other developers.
Hopefully there is another better solution.
Thanks again for the help! -
Every once in a while I get a message 'Unable to enable debugging. Please verify
that your webapp is deployed correctly. I can't seem to figure out why?Tito,
If you are working with multiple servers on the same machine, and have not
shutdown the debugger which was started for a different server, then you
could end up with this error message.
Please make sure that you use the stopweblogic script to shut down servers
in development mode. This script will make sure that both the server and the
debugger process are shutdown.
Regards,
Raj Alagumalai
Backline Workshop Support
"Tito Kumar" <[email protected]> wrote in message
news:4076dad5$[email protected]..
>
Every once in a while I get a message 'Unable to enable debugging. Pleaseverify
that your webapp is deployed correctly. I can't seem to figure out why? -
Error-Unable to start debugging.
Visual Studio 2013 showing an error while trying to Run.
' Unable to start debugging.
0x80040154
How to solve this issue?
Thanks,
ArjunHi Arjun,
Based on the error message, it is hard for us to find the real reason for this issue directly.
Could you get any other error messages if you build your project? Please check the detailed error or warning messages in Error list window or the output window.
The reason why I suggest you run it with "start without debugging" is that if it still has certain issues without debugging, it means that it is not the debugging issue.
Maybe you could view the Event log to get more information.
Could you share us the detailed steps about how you debug your project?
>> Unable to start debugging.0x80040154
A report about the simliar error message:
https://connect.microsoft.com/VisualStudio/feedback/details/786897/update-2-unable-to-debug-0x80040154
I got the issue with the error "Unable to Start Debugging on the Web Server" before.
Reference:
https://msdn.microsoft.com/en-us/library/vstudio/dwesw3ee(v=vs.120).aspx
https://technet.microsoft.com/zh-cn/subscriptions/dwesw3ee(v=vs.71).aspx
If still no help, maybe you could share us a simple sample, so we could debug it in our side.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Unable to Enable Maintenance Mode
This is my new challenge. I am unable to enable the maintenance mode. Following is the error message taken from adadmin.log. At the same time when I issue the command to enable it, there is core dump in the alert log and this is what it says. Please help me troubleshoot this issue.
Errors in file /oraadmin/SID/udump/SID_ora_7943.trc:
ORA-07445: exception encountered: core dump [kopxccc()+92] [SIGSEGV] [Address not mapped to object] [0x000000062] [] []
Change Maintenance Mode
Maintenance Mode is currently: [Disabled].
Maintenance mode should normally be enabled when patching
Oracle Applications and disabled when users are logged on
to the system. See the Oracle Applications Maintenance
Utilities manual for more information about maintenance mode.
Please select an option:
1. Enable Maintenance Mode
Please select an option:
1. Enable Maintenance Mode
2. Disable Maintenance Mode
3. Return to Main Menu
Enter your choice [3] : 1
sqlplus -s &un_apps/***** @/apps/tcfsmgr2/tcfscdi1appl/ad/11.5.0/patch/115/sql/adsetmmd.sql ENABLE
declare
ERROR at line 1:
ORA-03113: end-of-file on communication channel
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
memory exhausted
ORA-24323: value not allowed
Error accessing package DBMS_APPLICATION_INFO
ERROR:
ORA-03114: not connected to ORACLE
memory exhausted
memory exhausted
An error occurred while running adsetmmd.sql.
Continue as if it were successful [No] : No
aiimToggleMaintenanceMode():Error while calling aiucm3().
AD Administration error:
Unable to Enable Maintenance Mode.Yes, I was able to enable it from the backend;
SQL> @/apps/tcfsmgr2/tcfscdi1appl/ad/11.5.0/patch/115/sql/adsetmmd.sql ENABLE
PL/SQL procedure successfully completed.
Commit complete.
I am quite sure it did not work when it tried last night.
Let me try to do it using adadmin again. May be issue is no longer an issue. -
Debugging in JDev91, "Error: Unable to find fdebug.exe"
Hi,
I'm using JDev9i in Windows2000. When I try to debug my software JDev9i says; "Error: Unable to find fdebug.exe".
I have checked all security settings of my folders, (as someone proposed here to some one else, who had problem which was also linked somehow to fdebug.exe -file), but security settings were ok.
Can someone help me somehow ?
.JKa.have you checked that fdebug.exe is on your system?
It should be in <jdevroot>\jdk\jre\bin -
Get a popup an exception runtime error has occurred in script unable to jit debug
i get a pop up window, just-in-time debugging
An exception 'runtime error' has occurred in script.
However, no debuggers are registered that can debug this exception. Unable to JIT debug.'''I think I solved it myself yesterday, indirectly''' by deleting a Googleupdater.exe file dated 042511. It has been over 24 hours now and no sign of the 'Just-In-Time Debugger' pop-up. Whew...it was incessant.
Not sure how I got the Googleupdater.exe file on my computer. I did download Microsoft Security Essentials to help find the JIT problem, but it failed to install properly and run. The next day I remembered it probably only runs on Internet Explorer (which we deleted in 2009) after testing out Firefox. I then also deleted Security Essentials.
I also downloaded on April 25th the free version of MS Visual Basics because I read on eHow that you can adjust settings in the 'TOOL' menu to stop JIT Debugging pop-ups. However, the free version was 'MS Visual Studio Basic 2008 Express Edition - SP1' which did NOT provide access to JIT Debugging settings (so it was not a solution).
I must say I switched Internet Security programs to AVAST! on TU | Apr26th and love it so far. Highly recommend looking into AVAST! ver 6.0 at CNET downloads - free. The anti-virus program is free, but everything else costs about $30US for a year. WORTH IT Love the options | settings | flexibility|user friendly windows.
Trend Micro was then deleted. It had always blocked usage of our internal CD|DVD drive. To use the CD|DVD drive we had to shut off Trend Micro and then turn it back on again after we finished using the CD|DVD drive. NOT a preference - for sure. Jaykay -
Hi,
I am a Systems and Software Engineer based in Vancouver. I developed an automated test system using LabVIEW 2013 and TestStand 2013 with custom operator interface.
I encountered 'missing VIs' problem which is kind of weird because I passed analyzing the sequence for both TestStand Sequence Editor and TestStand Deployment Utility >> Distrubuted Files Tab.
But when I tried building the installer and reaching the point 'Calling distribution VIs, it always throw an error saying 'An error occurred while trying to read the depencies of the VIs, possible because the VIs are not saved in the current version of LabVIEW. Do you want to save any modified now?'. I tried both cases (i.e. Yes and No) for this option but it did not solve the issue.
This is part of the original error message displayed in TestStand Deployment Utility:
While Processing VIs...
Error: Unable to locate all subVIs from saved VIs because a subVI is missing or the VI is not saved in the current version of LabVIEW.
The call chain to missing VIs:
1 - ATE_AccelerometerTest.vi
2 - CreateAndMergeErrors.vi (missing)
3 - LogControl_CheckForErrorSendUpdates.vi (missing) "
All missing VIs are coming from userlib.
Actions Done:
- Analyzed sequence file using TestStand Sequence Editor and TestStand Deployment Utility
- Verified 'Search Directories' include all necessary files/dependencies.
- Mass compile the directory of the missing VIs
- Added all needed files and folders in the workspace file.
The result is still the same based from the actions done.
The last debugging I did earlier is that I tried locating the sequence and steps of missing VIs as mentioned above (e.g. ATE_AccelerometerTest.vi)
and I found out that the step seems to be an empty action step. Would this be possible even if it already passed the analysis?
Other considerations include:
I am using LabVIEW 2013 sp1 and TestStand 2013. We tried building from three (3) computers and we only succeeded once to a freshly-installed comptuer.
Hope to hear from you soon.
With Best Regards,
Michael Panganiban
Systems and Software Engineer
www.synovus.ca
[email protected]
Hi All,
We were able to resolve the issue. First to note is that the release notes in TestStand 2013 is outdated and we confirmed from NI Engineer in Austin that TestStand 2013 works fine with LabVIEW 2013 SP1.
Secondly, we played around TestStand Deployment option that resolved the issue. Attached are the images.
We just enabled the 'Remove Unused VI Components'. It could be one of the libraries (lvlib) we included in the build but we haven't figured it out yet because we verified that all VIs are working. It could be also something else that I think very difficult to find based from the information. However, if anybody experienced the same issue, this could be helpful.
Again, we revert back in using TestStand 2013 and LabVIEW 2013 SP1.
I appreciate any comments and feedbacks. Otherwise, you can close this support request.
Thank you.
With Best Regards,
Michael Panganiban
Systems and Software Engineer
-
Export Release Build error - Exception in thread "main" java.lang.Error: Unable to find named traits
I've been developing an AIR application for Android and iOS. During development, I've run the application (in debug mode) in the desktop simulator as well as on an iPhone 4 and a Nook Tablet.
However, I recently tried to "Export Release Build" for iOS and hit the following error: (I've stripped out the package and class information in the error message below)
!ENTRY com.adobe.flexbuilder.project 4 43 2012-04-06 13:09:15.516
!MESSAGE Error occurred while packaging the application:
Exception in thread "main" java.lang.Error: Unable to find named traits: valid.package.path.here::ValidClassName
at adobe.abc.Domain.resolveTypeName(Domain.java:231)
at adobe.abc.Domain.resolveTypeName(Domain.java:148)
at adobe.abc.GlobalOptimizer.sccp_eval(GlobalOptimizer.java:6665)
at adobe.abc.GlobalOptimizer.sccp_analyze(GlobalOptimizer.java:5909)
at adobe.abc.GlobalOptimizer.sccp(GlobalOptimizer.java:4628)
at adobe.abc.GlobalOptimizer.optimize(GlobalOptimizer.java:3514)
at adobe.abc.GlobalOptimizer.optimize(GlobalOptimizer.java:2215)
at adobe.abc.LLVMEmitter.optimizeABCs(LLVMEmitter.java:526)
at adobe.abc.LLVMEmitter.generateBitcode(LLVMEmitter.java:336)
at com.adobe.air.ipa.AOTCompiler.convertAbcToLlvmBitcodeImpl(AOTCompiler.java:472)
at com.adobe.air.ipa.BitcodeGenerator.main(BitcodeGenerator.java:82)
Compilation failed while executing : ADT
!STACK 0
java.lang.Exception
at com.adobe.flexbuilder.project.internal.FlexProjectCore.createErrorStatus(FlexProjectCore. java:1019)
at com.adobe.flexbuilder.util.logging.GlobalLogImpl.log(GlobalLogImpl.java:66)
at com.adobe.flexbuilder.util.logging.GlobalLog.log(GlobalLog.java:52)
at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionWizard.doPackage (ExportReleaseVersionWizard.java:283)
at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionWizard.performFi nish(ExportReleaseVersionWizard.java:152)
at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:827)
at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:432)
at org.eclipse.jface.dialogs.Dialog$2.widgetSelected(Dialog.java:624)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:240)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1465)
at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1270)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3974)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3613)
at org.eclipse.jface.window.Window.runEventLoop(Window.java:825)
at org.eclipse.jface.window.Window.open(Window.java:801)
at com.adobe.flexbuilder.exportimport.releaseversion.ExportReleaseVersionAction$1.run(Export ReleaseVersionAction.java:97)
at com.adobe.flexbuilder.exportimport.releaseversion.ExportReleaseVersionAction.run(ExportRe leaseVersionAction.java:103)
at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:251)
at org.eclipse.ui.internal.WWinPluginAction.runWithEvent(WWinPluginAction.java:229)
at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionI tem.java:584)
at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:501)
at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java :411)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1465)
at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1270)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3974)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3613)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2696)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2660)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2494)
at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:674)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:667)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at com.adobe.flexbuilder.standalone.FlashBuilderApplication.start(FlashBuilderApplication.ja va:108)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:344)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:622)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:577)
at org.eclipse.equinox.launcher.Main.run(Main.java:1410)
The class the error message is referring to is defined with a SWC that my project links to. However, I've even tried to define a class with that same name (and location) within my project and it still fails to find it.
Why am I able to Project->Clean and run this project within the desktop AIR player (or on the device in debug mode) but unable to export it as a release build?
I have found a couple of threads mentioning a similar error but none of them have been marked as resolved.At this point I feel I am talking to myself, but I will share my work-around in case it helps another who may stumble across this post.
In my particular case, both my main AIR application and my ANE wrapper library were referencing the same external Flex library (same revision). Both projects had the library linkage set to merge. Changing the linkage to "External" on one of the 2 libraries (it doesn't seem to matter which) and leaving the other as "Merged into code" enabled the export to complete without the bizarre "Unable to find named traits" error. -
Error: Unable to download document : "xml/motd.xml"
Hi,
I got the following error messages when downloading patches on my sunUC clients:
# smpatch download -i 118833-36
Error: Unable to download document : "xml/motd.xml"
Cannot connect to retrieve xml/motd.xml: Bad Request
Unable to display any message of the day notices from Sun Microsystems. Refer to the log file for additional information.
118833-36 has been validated.
I looked at all the log files in /var/sadm/spool and couldn't find anything related to the error messages.
The patch 118833-36 was downloaded and installed fine.Moderador,
Based on your request, I run 4 test scenarios that might provide some useful information.
Content of /var/sadm/spool/patchsvr
root@b3osdsun01:/root# ls -laR /var/sadm/spool/patchsvr
/var/sadm/spool/patchsvr:
total 36
drwxr-xr-x 6 root sys 512 Sep 9 05:36 .
drwxr-xr-x 8 root sys 7168 Feb 24 12:39 ..
drwxr-xr-x 2 root root 3072 Feb 24 09:52 Database
drwxr-xr-x 2 root sys 1024 Feb 24 06:11 Misc
drwxr-xr-x 2 root sys 3072 Feb 24 00:03 Patches
drwxr-xr-x 2 root root 2560 Feb 24 09:52 entitlement
/var/sadm/spool/patchsvr/Database:
total 1208
drwxr-xr-x 2 root root 3072 Feb 24 09:52 .
drwxr-xr-x 6 root sys 512 Sep 9 05:36 ..
-rw-r--r-- 1 root root 291567 Oct 14 07:18 https%3A%2F%2Fgetupdates.sun.com%2Fsolaris%2F%2FDatabase%2Fcurrent.zip
-rw-r--r-- 1 root root 0 Oct 1 12:29 https%3A%2F%2Fgetupdates.sun.com%2Fsolaris%2F%2FDatabase%2Fcurrent.zip32460
-rw-r--r-- 1 root root 0 Oct 1 12:30 https%3A%2F%2Fgetupdates.sun.com%2Fsolaris%2F%2FDatabase%2Fcurrent.zip32462
-rw-r--r-- 1 root root 0 Oct 1 12:39 https%3A%2F%2Fgetupdates.sun.com%2Fsolaris%2F%2FDatabase%2Fcurrent.zip32464
-rw-r--r-- 1 root root 0 Oct 1 12:48 https%3A%2F%2Fgetupdates.sun.com%2Fsolaris%2F%2FDatabase%2Fcurrent.zip32466
-rw-r--r-- 1 root root 0 Oct 1 13:01 https%3A%2F%2Fgetupdates.sun.com%2Fsolaris%2F%2FDatabase%2Fcurrent.zip32468
-rw-r--r-- 1 root root 0 Oct 1 13:08 https%3A%2F%2Fgetupdates.sun.com%2Fsolaris%2F%2FDatabase%2Fcurrent.zip32470
-rw-r--r-- 1 root root 298728 Feb 23 17:11 https%3A%2F%2Fgetupdates1.sun.com%2F%2FDatabase%2FDatabase%2Fcurrent.zip
-rw-r--r-- 1 root root 0 Feb 23 20:57 https%3A%2F%2Fgetupdates1.sun.com%2F%2FDatabase%2FDatabase%2Fcurrent.zip261
-rw-r--r-- 1 root root 0 Feb 23 21:00 https%3A%2F%2Fgetupdates1.sun.com%2F%2FDatabase%2FDatabase%2Fcurrent.zip264
-rw-r--r-- 1 root root 0 Feb 23 21:09 https%3A%2F%2Fgetupdates1.sun.com%2F%2FDatabase%2FDatabase%2Fcurrent.zip267
-rw-r--r-- 1 root root 0 Feb 23 21:11 https%3A%2F%2Fgetupdates1.sun.com%2F%2FDatabase%2FDatabase%2Fcurrent.zip269
-rw-r--r-- 1 root root 0 Feb 23 21:18 https%3A%2F%2Fgetupdates1.sun.com%2F%2FDatabase%2FDatabase%2Fcurrent.zip272
-rw-r--r-- 1 root root 0 Feb 23 21:19 https%3A%2F%2Fgetupdates1.sun.com%2F%2FDatabase%2FDatabase%2Fcurrent.zip274
-rw-r--r-- 1 root root 0 Feb 23 21:21 https%3A%2F%2Fgetupdates1.sun.com%2F%2FDatabase%2FDatabase%2Fcurrent.zip276
-rw-r--r-- 1 root root 0 Feb 23 21:24 https%3A%2F%2Fgetupdates1.sun.com%2F%2FDatabase%2FDatabase%2Fcurrent.zip279
-rw-r--r-- 1 root root 0 Feb 23 21:29 https%3A%2F%2Fgetupdates1.sun.com%2F%2FDatabase%2FDatabase%2Fcurrent.zip281
-rw-r--r-- 1 root root 0 Feb 23 21:46 https%3A%2F%2Fgetupdates1.sun.com%2F%2FDatabase%2FDatabase%2Fcurrent.zip284
-rw-r--r-- 1 root root 0 Feb 23 22:11 https%3A%2F%2Fgetupdates1.sun.com%2F%2FDatabase%2FDatabase%2Fcurrent.zip286
-rw-r--r-- 1 root root 0 Feb 23 22:31 https%3A%2F%2Fgetupdates1.sun.com%2F%2FDatabase%2FDatabase%2Fcurrent.zip289
-rw-r--r-- 1 root root 0 Feb 23 23:05 https%3A%2F%2Fgetupdates1.sun.com%2F%2FDatabase%2FDatabase%2Fcurrent.zip292
-rw-r--r-- 1 root root 0 Feb 24 00:01 https%3A%2F%2Fgetupdates1.sun.com%2F%2FDatabase%2FDatabase%2Fcurrent.zip295
-rw-r--r-- 1 root root 0 Feb 24 00:01 https%3A%2F%2Fgetupdates1.sun.com%2F%2FDatabase%2FDatabase%2Fcurrent.zip296
-rw-r--r-- 1 root root 0 Feb 24 00:01 https%3A%2F%2Fgetupdates1.sun.com%2F%2FDatabase%2FDatabase%2Fcurrent.zip297
-rw-r--r-- 1 root root 0 Feb 24 05:44 https%3A%2F%2Fgetupdates1.sun.com%2F%2FDatabase%2FDatabase%2Fcurrent.zip301
-rw-r--r-- 1 root root 0 Feb 24 05:48 https%3A%2F%2Fgetupdates1.sun.com%2F%2FDatabase%2FDatabase%2Fcurrent.zip304
-rw-r--r-- 1 root root 0 Feb 24 06:11 https%3A%2F%2Fgetupdates1.sun.com%2F%2FDatabase%2FDatabase%2Fcurrent.zip307
-rw-r--r-- 1 root root 0 Feb 24 08:12 https%3A%2F%2Fgetupdates1.sun.com%2F%2FDatabase%2FDatabase%2Fcurrent.zip309
-rw-r--r-- 1 root root 0 Feb 24 09:43 https%3A%2F%2Fgetupdates1.sun.com%2F%2FDatabase%2FDatabase%2Fcurrent.zip311
-rw-r--r-- 1 root root 0 Feb 24 09:52 https%3A%2F%2Fgetupdates1.sun.com%2F%2FDatabase%2FDatabase%2Fcurrent.zip313
/var/sadm/spool/patchsvr/Misc:
total 14228
drwxr-xr-x 2 root sys 1024 Feb 24 06:11 .
drwxr-xr-x 6 root sys 512 Sep 9 05:36 ..
-rw-r--r-- 1 root root 3611154 Oct 14 07:18 https%3A%2F%2Fgetupdates.sun.com%2Fsolaris%2F%2Fdetectors.jar
-rw-r--r-- 1 root root 3646470 Feb 23 17:12 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fdetectors.jar
-rw-r--r-- 1 root root 0 Feb 23 20:57 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fdetectors.jar262
-rw-r--r-- 1 root root 0 Feb 23 21:09 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fdetectors.jar266
-rw-r--r-- 1 root root 0 Feb 23 21:18 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fdetectors.jar271
-rw-r--r-- 1 root root 0 Feb 23 21:21 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fdetectors.jar277
-rw-r--r-- 1 root root 0 Feb 23 21:46 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fdetectors.jar283
-rw-r--r-- 1 root root 0 Feb 23 22:11 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fdetectors.jar287
-rw-r--r-- 1 root root 0 Feb 23 23:05 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fdetectors.jar291
-rw-r--r-- 1 root root 0 Feb 24 00:01 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fdetectors.jar294
-rw-r--r-- 1 root root 0 Feb 24 05:44 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fdetectors.jar302
-rw-r--r-- 1 root root 0 Feb 24 06:11 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fdetectors.jar306
/var/sadm/spool/patchsvr/Patches:
total 1292618
drwxr-xr-x 2 root sys 3072 Feb 24 00:03 .
drwxr-xr-x 6 root sys 512 Sep 9 05:36 ..
-rw-r--r-- 1 root root 46475761 Oct 1 10:50 113886-38.jar
-rw-r--r-- 1 root root 43498410 Feb 23 21:01 113886-42.jar
-rw-r--r-- 1 root root 42888423 Oct 1 10:52 113887-38.jar
-rw-r--r-- 1 root root 40807581 Feb 23 21:02 113887-42.jar
-rw-r--r-- 1 root root 151954 Oct 1 10:53 118557-06.jar
-rw-r--r-- 1 root root 69163583 Feb 23 21:03 118666-11.jar
-rw-r--r-- 1 root root 10514183 Feb 23 21:03 118667-11.jar
-rw-r--r-- 1 root root 188662 Oct 1 10:48 118683-01.jar
-rw-r--r-- 1 root root 236302 Oct 1 10:56 118706-01.jar
-rw-r--r-- 1 root root 196150 Oct 1 10:56 118707-04.jar
-rw-r--r-- 1 root root 419527 Oct 1 10:56 118708-13.jar
-rw-r--r-- 1 root root 105696 Oct 1 10:56 118711-02.jar
-rw-r--r-- 1 root root 295738 Oct 1 10:56 118712-10.jar
-rw-r--r-- 1 root root 302061 Feb 23 21:02 118712-13.jar
-rw-r--r-- 1 root root 496152 Oct 1 10:56 118777-06.jar
-rw-r--r-- 1 root root 95092 Oct 1 10:53 118812-03.jar
-rw-r--r-- 1 root root 166160 Feb 24 00:02 118815-05.jar
-rw-r--r-- 1 root root 80428 Oct 1 10:56 118830-01.jar
-rw-r--r-- 1 root root 34095003 Oct 8 09:41 118833-24.jar
-rw-r--r-- 1 root root 54413206 Feb 24 00:03 118833-36.jar
-rw-r--r-- 1 root root 1808265 Oct 1 10:53 118918-19.jar
-rw-r--r-- 1 root root 1822253 Feb 24 00:02 118918-24.jar
-rw-r--r-- 1 root root 96695 Oct 1 10:56 118945-01.jar
-rw-r--r-- 1 root root 91763 Oct 1 10:56 118981-03.jar
-rw-r--r-- 1 root root 5573200 Oct 8 09:42 119059-18.jar
-rw-r--r-- 1 root root 5576430 Feb 23 21:03 119059-21.jar
-rw-r--r-- 1 root root 114774 Oct 1 10:57 119063-01.jar
-rw-r--r-- 1 root root 1189956 Feb 23 21:00 119081-25.jar
-rw-r--r-- 1 root root 13288480 Oct 1 10:57 119115-18.jar
-rw-r--r-- 1 root root 14743306 Feb 23 21:03 119115-22.jar
-rw-r--r-- 1 root root 4273087 Oct 1 10:56 119117-22.jar
-rw-r--r-- 1 root root 4617883 Feb 23 21:02 119117-29.jar
-rw-r--r-- 1 root root 8607487 Oct 1 10:56 119213-09.jar
-rw-r--r-- 1 root root 8618010 Oct 14 07:18 119213-10.jar
-rw-r--r-- 1 root root 8660261 Feb 23 21:01 119213-11.jar
-rw-r--r-- 1 root root 1356682 Oct 1 10:45 119254-27.jar
-rw-r--r-- 1 root root 1361281 Feb 24 00:01 119254-34.jar
-rw-r--r-- 1 root root 101596 Oct 1 10:56 119309-03.jar
-rw-r--r-- 1 root root 1270965 Feb 23 21:04 119397-06.jar
-rw-r--r-- 1 root root 494252 Oct 1 10:53 119470-08.jar
-rw-r--r-- 1 root root 1827070 Oct 1 10:56 119546-07.jar
-rw-r--r-- 1 root root 1160825 Oct 1 10:56 119548-05.jar
-rw-r--r-- 1 root root 1939955 Oct 1 10:52 119578-29.jar
-rw-r--r-- 1 root root 61172 Feb 23 21:02 119703-08.jar
-rw-r--r-- 1 root root 39643171 Oct 1 10:56 119757-04.jar
-rw-r--r-- 1 root root 751835 Oct 1 10:53 119850-20.jar
-rw-r--r-- 1 root root 751901 Oct 8 09:42 119850-21.jar
-rw-r--r-- 1 root root 541532 Oct 1 10:56 119900-02.jar
-rw-r--r-- 1 root root 797869 Oct 1 10:57 119903-02.jar
-rw-r--r-- 1 root root 1720037 Oct 1 10:48 119963-07.jar
-rw-r--r-- 1 root root 1737070 Feb 23 21:03 119998-02.jar
-rw-r--r-- 1 root root 91104 Oct 1 10:52 120056-02.jar
-rw-r--r-- 1 root root 90969 Oct 1 10:53 120061-02.jar
-rw-r--r-- 1 root root 51318 Feb 23 21:01 120068-02.jar
-rw-r--r-- 1 root root 302460 Oct 1 10:56 120099-07.jar
-rw-r--r-- 1 root root 54484 Oct 1 10:53 120294-01.jar
-rw-r--r-- 1 root root 71490 Oct 1 10:53 120346-04.jar
-rw-r--r-- 1 root root 999740 Oct 1 10:53 120467-05.jar
-rw-r--r-- 1 root root 795638 Oct 1 10:53 120469-05.jar
-rw-r--r-- 1 root root 16139832 Oct 1 10:52 120543-05.jar
-rw-r--r-- 1 root root 16258980 Oct 8 09:42 120543-06.jar
-rw-r--r-- 1 root root 16253320 Feb 23 21:03 120543-08.jar
-rw-r--r-- 1 root root 493214 Feb 24 00:02 120719-02.jar
-rw-r--r-- 1 root root 270675 Oct 1 10:48 120753-02.jar
-rw-r--r-- 1 root root 84612 Oct 1 10:48 120780-02.jar
-rw-r--r-- 1 root root 320258 Oct 14 07:18 120791-05.jar
-rw-r--r-- 1 root root 58715 Oct 1 10:52 120887-06.jar
-rw-r--r-- 1 root root 102087 Feb 24 00:02 121002-03.jar
-rw-r--r-- 1 root root 1175840 Oct 1 10:52 121081-05.jar
-rw-r--r-- 1 root root 1176987 Feb 23 23:05 121081-06.jar
-rw-r--r-- 1 root root 61029 Oct 1 10:56 121095-01.jar
-rw-r--r-- 1 root root 87618400 Oct 1 10:47 121104-01.jar
-rw-r--r-- 1 root root 1604794 Oct 14 07:18 121118-08.jar
-rw-r--r-- 1 root root 1756896 Feb 23 21:02 121118-11.jar
-rw-r--r-- 1 root root 25377 Oct 1 10:48 121136-01.jar
-rw-r--r-- 1 root root 43541 Oct 1 10:52 121302-01.jar
-rw-r--r-- 1 root root 1349725 Oct 1 10:45 121308-07.jar
-rw-r--r-- 1 root root 766128 Oct 1 10:45 121430-11.jar
-rw-r--r-- 1 root root 33454 Oct 1 10:52 121474-01.jar
-rw-r--r-- 1 root root 39156 Oct 1 10:53 121556-01.jar
-rw-r--r-- 1 root root 54439 Oct 1 10:53 121557-01.jar
-rw-r--r-- 1 root root 38531 Oct 1 10:53 121558-01.jar
-rw-r--r-- 1 root root 64667 Oct 1 10:53 121559-01.jar
-rw-r--r-- 1 root root 455467 Oct 1 10:56 121563-02.jar
-rw-r--r-- 1 root root 73619 Oct 1 10:52 121693-03.jar
-rw-r--r-- 1 root root 78784 Feb 23 21:04 121734-05.jar
-rw-r--r-- 1 root root 26983 Feb 23 23:05 121901-01.jar
-rw-r--r-- 1 root root 328956 Oct 8 09:42 122027-08.jar
-rw-r--r-- 1 root root 334464 Feb 23 21:01 122032-04.jar
-rw-r--r-- 1 root root 5622658 Oct 8 09:42 122212-10.jar
-rw-r--r-- 1 root root 5712006 Oct 14 07:19 122212-12.jar
-rw-r--r-- 1 root root 5724049 Feb 23 21:02 122212-17.jar
-rw-r--r-- 1 root root 73018 Oct 1 10:53 122363-01.jar
-rw-r--r-- 1 root root 39118 Oct 1 10:53 122515-01.jar
-rw-r--r-- 1 root root 77359 Oct 1 10:53 122517-02.jar
-rw-r--r-- 1 root root 81527 Oct 1 10:53 122523-03.jar
-rw-r--r-- 1 root root 63877 Oct 1 10:53 122525-02.jar
-rw-r--r-- 1 root root 195842 Oct 14 07:18 122669-01.jar
-rw-r--r-- 1 root root 42365 Oct 14 07:18 122761-01.jar
-rw-r--r-- 1 root root 197594 Oct 14 07:18 122860-01.jar
-rw-r--r-- 1 root root 10965819 Oct 8 09:42 122911-02.jar
-rw-r--r-- 1 root root 475616 Feb 23 21:01 123186-02.jar
-rw-r--r-- 1 root root 108231 Oct 1 10:53 123304-02.jar
-rw-r--r-- 1 root root 30541 Oct 1 10:53 123334-02.jar
-rw-r--r-- 1 root root 34196 Oct 1 10:53 123360-01.jar
-rw-r--r-- 1 root root 223934 Oct 14 07:18 124206-02.jar
-rw-r--r-- 1 root root 51848 Feb 23 21:03 124244-01.jar
-rw-r--r-- 1 root root 578669 Feb 23 21:12 124614-01.jar
-rw-r--r-- 1 root root 437290 Feb 23 21:00 124630-03.jar
-rw-r--r-- 1 root root 307636 Feb 23 21:03 124922-02.jar
-rw-r--r-- 1 root root 41967 Feb 23 21:01 124943-01.jar
-rw-r--r-- 1 root root 55028 Feb 23 21:03 124997-01.jar
-rw-r--r-- 1 root root 657450 Feb 23 21:01 125011-01.jar
/var/sadm/spool/patchsvr/entitlement:
total 12
drwxr-xr-x 2 root root 2560 Feb 24 09:52 .
drwxr-xr-x 6 root sys 512 Sep 9 05:36 ..
-rw-r--r-- 1 root root 121 Oct 14 07:18 https%3A%2F%2Fgetupdates.sun.com%2Fsolaris%2F%2Fentitlement_lps
-rw-r--r-- 1 root root 0 Oct 1 12:29 https%3A%2F%2Fgetupdates.sun.com%2Fsolaris%2F%2Fentitlement_lps32461
-rw-r--r-- 1 root root 0 Oct 1 12:30 https%3A%2F%2Fgetupdates.sun.com%2Fsolaris%2F%2Fentitlement_lps32463
-rw-r--r-- 1 root root 0 Oct 1 12:39 https%3A%2F%2Fgetupdates.sun.com%2Fsolaris%2F%2Fentitlement_lps32465
-rw-r--r-- 1 root root 0 Oct 1 12:48 https%3A%2F%2Fgetupdates.sun.com%2Fsolaris%2F%2Fentitlement_lps32467
-rw-r--r-- 1 root root 0 Oct 1 13:01 https%3A%2F%2Fgetupdates.sun.com%2Fsolaris%2F%2Fentitlement_lps32469
-rw-r--r-- 1 root root 0 Oct 1 13:08 https%3A%2F%2Fgetupdates.sun.com%2Fsolaris%2F%2Fentitlement_lps32471
-rw-r--r-- 1 root root 187 Feb 23 17:12 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fentitlement_lps
-rw-r--r-- 1 root root 0 Feb 23 20:58 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fentitlement_lps263
-rw-r--r-- 1 root root 0 Feb 23 21:00 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fentitlement_lps265
-rw-r--r-- 1 root root 0 Feb 23 21:10 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fentitlement_lps268
-rw-r--r-- 1 root root 0 Feb 23 21:12 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fentitlement_lps270
-rw-r--r-- 1 root root 0 Feb 23 21:19 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fentitlement_lps273
-rw-r--r-- 1 root root 0 Feb 23 21:19 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fentitlement_lps275
-rw-r--r-- 1 root root 0 Feb 23 21:21 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fentitlement_lps278
-rw-r--r-- 1 root root 0 Feb 23 21:25 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fentitlement_lps280
-rw-r--r-- 1 root root 0 Feb 23 21:30 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fentitlement_lps282
-rw-r--r-- 1 root root 0 Feb 23 21:47 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fentitlement_lps285
-rw-r--r-- 1 root root 0 Feb 23 22:12 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fentitlement_lps288
-rw-r--r-- 1 root root 0 Feb 23 22:31 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fentitlement_lps290
-rw-r--r-- 1 root root 0 Feb 23 23:05 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fentitlement_lps293
-rw-r--r-- 1 root root 0 Feb 24 00:01 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fentitlement_lps298
-rw-r--r-- 1 root root 0 Feb 24 00:01 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fentitlement_lps299
-rw-r--r-- 1 root root 0 Feb 24 00:02 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fentitlement_lps300
-rw-r--r-- 1 root root 0 Feb 24 05:45 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fentitlement_lps303
-rw-r--r-- 1 root root 0 Feb 24 05:49 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fentitlement_lps305
-rw-r--r-- 1 root root 0 Feb 24 06:12 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fentitlement_lps308
-rw-r--r-- 1 root root 0 Feb 24 08:12 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fentitlement_lps310
-rw-r--r-- 1 root root 0 Feb 24 09:43 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fentitlement_lps312
-rw-r--r-- 1 root root 0 Feb 24 09:52 https%3A%2F%2Fgetupdates1.sun.com%2F%2Fentitlement_lps314
root@b3osdsun01:/root#
SCENARIO 1
- Did NOT restart the sunUC proxy server
- run smpatch analyze from two sunUC clients
- source URL = http://solaris3.ny.frb.org:3816/
Results of client B1STSUN02
root@b1stsun02# patchadd -p | grep 121118
Patch: 121118-06 Obsoletes: Requires: 121453-02 Incompatibles: Packages: SUNWppror SUNWpprou SUNWppro-plugin-sunos-base SUNWupdatemgru SUNWupdatemgrr
Patch: 121118-08 Obsoletes: Requires: 121453-02 Incompatibles: Packages: SUNWppror SUNWpprou SUNWppro-plugin-sunos-base SUNWupdatemgru SUNWupdatemgrr
Patch: 121118-11 Obsoletes: Requires: 121453-02 Incompatibles: Packages: SUNWppror SUNWpprou SUNWppro-plugin-sunos-base SUNWcsmauth SUNWupdatemgru SUNWupdatemgrr
root@b1stsun02# smpatch get
patchpro.backout.directory - ""
patchpro.baseline.directory - /var/sadm/spool
patchpro.download.directory - /var/sadm/spool
patchpro.install.types - rebootafter:reconfigafter:standard
patchpro.patch.source http://solaris3.ny.frb.org:3816/ https://getupdates1.sun.com/
patchpro.patchset - current
patchpro.proxy.host - ""
patchpro.proxy.passwd **** ****
patchpro.proxy.port - 8080
patchpro.proxy.user - ""
root@b1stsun02# smpatch analyze -C patchpro.log.level=3 -C patchpro.debug=true
Effective proxy host : ""
Effective proxy port : "8080"
Effective proxy user : ""
... Submitting download request against a Non-GUUS server
... Caught IO Exception.
((HttpURLConnection)connection).getResponseCode() : 503
((HttpURLConnection)connection).getResponseMessage() : Servlet PatchServer is currently unavailable
Error: Unable to download document : "xml/motd.xml"
Cannot connect to retrieve xml/motd.xml: Servlet PatchServer is currently unavailable
Unable to display any message of the day notices from Sun Microsystems. Refer to the log file for additional information.
Effective proxy host : ""
Effective proxy port : "8080"
Effective proxy user : ""
... Submitting download request against a Non-GUUS server
Effective proxy host : ""
Effective proxy port : "8080"
Effective proxy user : ""
... Submitting download request against a Non-GUUS server
... Caught IO Exception.
((HttpURLConnection)connection).getResponseCode() : 503
((HttpURLConnection)connection).getResponseMessage() : Servlet PatchServer is currently unavailable
... Caught IO Exception.
((HttpURLConnection)connection).getResponseCode() : 503
((HttpURLConnection)connection).getResponseMessage() : Servlet PatchServer is currently unavailable
Failure: Cannot connect to retrieve detectors: Servlet PatchServer is currently unavailable
root@b1stsun02#
Results of client B1ISFSUN02
root@b1isfsun02# patchadd -p | grep 121118
Patch: 121118-06 Obsoletes: Requires: 121453-02 Incompatibles: Packages: SUNWppror SUNWpprou SUNWppro-plugin-sunos-base SUNWupdatemgru SUNWupdatemgrr
Patch: 121118-10 Obsoletes: Requires: 121453-02 Incompatibles: Packages: SUNWppror SUNWpprou SUNWppro-plugin-sunos-base SUNWcsmauth SUNWupdatemgru SUNWupdatemgrr
Patch: 121118-11 Obsoletes: Requires: 121453-02 Incompatibles: Packages: SUNWppror SUNWpprou SUNWppro-plugin-sunos-base SUNWcsmauth SUNWupdatemgru SUNWupdatemgrr
root@b1isfsun02# smpatch get
patchpro.backout.directory - ""
patchpro.baseline.directory - /var/sadm/spool
patchpro.download.directory - /var/sadm/spool
patchpro.install.types - rebootafter:reconfigafter:standard
patchpro.patch.source http://solaris3.ny.frb.org:3816/ https://getupdates1.sun.com/
patchpro.patchset - current
patchpro.proxy.host - ""
patchpro.proxy.passwd **** ****
patchpro.proxy.port - 8080
patchpro.proxy.user - ""
root@b1isfsun02# smpatch analyze -C patchpro.log.level=3 -C patchpro.debug=true
Effective proxy host : ""
Effective proxy port : "8080"
Effective proxy user : ""
... Submitting download request against a Non-GUUS server
... Caught IO Exception.
((HttpURLConnection)connection).getResponseCode() : 503
((HttpURLConnection)connection).getResponseMessage() : Servlet PatchServer is currently unavailable
Error: Unable to download document : "xml/motd.xml"
Cannot connect to retrieve xml/motd.xml: Servlet PatchServer is currently unavailable
Unable to display any message of the day notices from Sun Microsystems. Refer to the log file for additional information.
Effective proxy host : ""
Effective proxy port : "8080"
Effective proxy user : ""
... Submitting download request against a Non-GUUS server
Effective proxy host : ""
Effective proxy port : "8080"
Effective proxy user : ""
... Submitting download request against a Non-GUUS server
... Caught IO Exception.
((HttpURLConnection)connection).getResponseCode() : 503
((HttpURLConnection)connection).getResponseMessage() : Servlet PatchServer is currently unavailable
... Caught IO Exception.
((HttpURLConnection)connection).getResponseCode() : 503
((HttpURLConnection)connection).getResponseMessage() : Servlet PatchServer is currently unavailable
Failure: Cannot connect to retrieve detectors: Servlet PatchServer is currently unavailable
root@b1isfsun02#
SCENARIO 2
- same as scenario 1 except source URL = http://solaris3.ny.frb.org:3816/solaris/
Results of client B1STSUN02
root@b1stsun02# smpatch set patchpro.patch.source=http://solaris3.ny.frb.org:3816/solaris/
root@b1stsun02# smpatch get
patchpro.backout.directory - ""
patchpro.baseline.directory - /var/sadm/spool
patchpro.download.directory - /var/sadm/spool
patchpro.install.types - rebootafter:reconfigafter:standard
patchpro.patch.source http://solaris3.ny.frb.org:3816/solaris/ https://getupdates1.sun.com/
patchpro.patchset - current
patchpro.proxy.host - ""
patchpro.proxy.passwd **** ****
patchpro.proxy.port - 8080
patchpro.proxy.user - ""
root@b1stsun02# smpatch analyze -C patchpro.log.level=3 -C patchpro.debug=true
Effective proxy host : ""
Effective proxy port : "8080"
Effective proxy user : ""
... Submitting download request against a Non-GUUS server
... Caught IO Exception.
((HttpURLConnection)connection).getResponseCode() : 400
((HttpURLConnection)connection).getResponseMessage() : Bad Request
Error: Unable to download document : "xml/motd.xml"
Cannot connect to retrieve xml/motd.xml: Bad Request
Unable to display any message of the day notices from Sun Microsystems. Refer to the log file for additional information.
Effective proxy host : ""
Effective proxy port : "8080"
Effective proxy user : ""
... Submitting download request against a Non-GUUS server
Effective proxy host : ""
Effective proxy port : "8080"
Effective proxy user : ""
Key 1 : Content-Type = application/octet-stream
Key 2 : Date = Sun, 25 Feb 2007 15:13:56 GMT
Key 3 : Server = Apache Tomcat/4.0.5 (HTTP/1.1 Connector)
Key 4 : Transfer-Encoding = chunked
Key 5 : PatchProServletCompletionCode = 0
Effective proxy host : ""
Effective proxy port : "8080"
Effective proxy user : ""
Effective proxy host : ""
Effective proxy port : "8080"
Effective proxy user : ""
... Submitting download request against a Non-GUUS server
Key 1 : Content-Type = application/octet-stream
Key 2 : Date = Sun, 25 Feb 2007 15:14:18 GMT
Key 3 : Server = Apache Tomcat/4.0.5 (HTTP/1.1 Connector)
Key 4 : Transfer-Encoding = chunked
Key 5 : PatchProServletCompletionCode = 0
119081-25 SunOS 5.10: CD-ROM Install Boot Image Patch
124630-03 SunOS 5.10: System Administration Applications, Network and Core Libraries Patch
119254-34 SunOS 5.10: Install and Patch Utilities Patch
113886-42 OpenGL 1.3: OpenGL Patch for Solaris (32-bit)
113887-42 OpenGL 1.3: OpenGL Patch for Solaris (64-bit)
120543-08 SunOS 5.10: Apache 2 Patch
124244-01 SunOS 5.10: /usr/bin/rm patch
124997-01 SunOS 5.10: /usr/bin/tip patch
124614-01 SunOS 5.10: sconadm proxy: UnknownHostException
118371-08 SunOS 5.10: elfsign Patch
120068-03 SunOS 5.10: in.telnetd patch
119115-23 Mozilla 1.7 patch
root@b1stsun02#
[b]Results of client B1ISFSUN02
root@b1isfsun02# smpatch set patchpro.patch.source=http://solaris3.ny.frb.org:3816/solaris/
root@b1isfsun02# smpatch get
patchpro.backout.directory - ""
patchpro.baseline.directory - /var/sadm/spool
patchpro.download.directory - /var/sadm/spool
patchpro.install.types - rebootafter:reconfigafter:standard
patchpro.patch.source http://solaris3.ny.frb.org:3816/solaris/ https://getupdates1.sun.com/
patchpro.patchset - current
patchpro.proxy.host - ""
patchpro.proxy.passwd **** ****
patchpro.proxy.port - 8080
patchpro.proxy.user - ""
root@b1isfsun02# smpatch analyze -C patchpro.log.level=3 -C patchpro.debug=true
Effective proxy host : ""
Effective proxy port : "8080"
Effective proxy user : ""
... Submitting download request against a Non-GUUS server
... Caught IO Exception.
((HttpURLConnection)connection).getResponseCode() : 400
((HttpURLConnection)connection).getResponseMessage() : Bad Request
Error: Unable to download document : "xml/motd.xml"
Cannot connect to retrieve xml/motd.xml: Bad Request
Unable to display any message of the day notices from Sun Microsystems. Refer to the log file for additional information.
Effective proxy host : ""
Effective proxy port : "8080"
Effective proxy user : ""
Effective proxy host : ""
Effective proxy port : "8080"
Effective proxy user : ""
... Submitting download request against a Non-GUUS server
... Submitting download request against a Non-GUUS server
Key 1 : Content-Type = application/octet-stream
Key 2 : Date = Sun, 25 Feb 2007 15:17:41 GMT
Key 3 : Server = Apache Tomcat/4.0.5 (HTTP/1.1 Connector)
Key 4 : Transfer-Encoding = chunked
Key 5 : PatchProServletCompletionCode = 0
Key 1 : Content-Type = application/octet-stream
Key 2 : Date = Sun, 25 Feb 2007 15:17:42 GMT
Key 3 : Server = Apache Tomcat/4.0.5 (HTTP/1.1 Connector)
Key 4 : Transfer-Encoding = chunked
Key 5 : PatchProServletCompletionCode = 0
Effective proxy host : ""
Effective proxy port : "8080"
Effective proxy user : ""
Effective proxy host : ""
Effective proxy port : "8080"
Effective proxy user : ""
... Submitting download request against a Non-GUUS server
Key 1 : Content-Type = application/octet-stream
Key 2 : Date = Sun, 25 Feb 2007 15:18:27 GMT
Key 3 : Server = Apache Tomcat/4.0.5 (HTTP/1.1 Connector)
Key 4 : Transfer-Encoding = chunked
Key 5 : PatchProServletCompletionCode = 0
124614-01 SunOS 5.10: sconadm proxy: UnknownHostException
118371-08 SunOS 5.10: elfsign Patch
120068-03 SunOS 5.10: in.telnetd patch
119115-23 Mozilla 1.7 patch
root@b1isfsun02#
SCENARIO 3
- RESTART sunUC proxy server
- same two sunUC clients
- source URL = http://solaris3.ny.frb.org:3816/
Results of restarting sunUC proxy
root@b3osdsun01:/root# patchsvr stop
Shutting down Local Patch Server
root@b3osdsun01:/root# patchsvr start
Starting Local Patch Server
root@b3osdsun01:/root# patchsvr enable
root@b3osdsun01:/root# patchsvr status
enabled
root@b3osdsun01:/root#
Results of clientB1STSUN02
root@b1stsun02# smpatch set patchpro.patch.source=http://solaris3.ny.frb.org:3816/
root@b1stsun02# smpatch get
patchpro.backout.directory - ""
patchpro.baseline.directory - /var/sadm/spool
patchpro.download.directory - /var/sadm/spool
patchpro.install.types - rebootafter:reconfigafter:standard
patchpro.patch.source http://solaris3.ny.frb.org:3816/ https://getupdates1.sun.com/
patchpro.patchset - current
patchpro.proxy.host - ""
patchpro.proxy.passwd **** ****
patchpro.proxy.port - 8080
patchpro.proxy.user - -
Unable to enable in web services using direct cable from my router
LaserJet Pro printer is working. Unable to enable in web tab error message: Connection error. Check Internet connection.
I have internet connection and don't use proxy server. I have powered off both printer and router. Thank you.Hello! Could you please provide more information regarding the issue, such as which laserjet you are using? Any additional information will be helpful in resolving your issue. Thanks!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal. -
BO 4.0 - Database error: Unable to connect to SAP BW Incomplete logon data
Hello Experts,
I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
[http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers]
I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
Database error: Unable to connect to SAP BW server Incomplete logon data -
If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
Desired outcome:
I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
Any help in this matter would be greatly appreciated.
Thanks & regards,
CD.Hi Simone,
Thank you for the reply.
Here are the things done by me.
1. Generated the keystore file and imported it in BI 4.0 CMC on SAP Authentication Option tab
([http://wiki.sdn.sap.com/wiki/display/BOBJ/GeneratekeystoreandcertificateforSAPBO+BI4.0])
([http://wiki.sdn.sap.com/wiki/display/BOBJ/SetupofSAPSSOServiceinSAPBOBI4.0+CMC])
2. Generate the certificate file cert.der and this cert is imported in SAP BW with STRUSTSSO2 transaction.
([http://wiki.sdn.sap.com/wiki/display/BOBJ/ImportSAPBOBI4.0certificateintoSAP+BW])
3. BW Roles/Users have been imported into CMC.
4. SAP Users and LDAP users are mapped/aliased with each other using the registry key method
([http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtomapSAPusersandLDAPusersinSBOBI4.0+CMC])
I haven't explicitly configured STS (Security token service) as STS is a part of Adaptive processing server (APS) and I have verified that by going to servers in CMC and then to analysis services.
I have searched for SAP OSS notes related to my issue but couldn't find any note related to SAP BW SSO with Business objects 4.0. Most of the notes are relevant for BO XI 3.1 environments.
Thanks & regards,
CD. -
BO 4.0: Database error:Unable to connect to SAP BW server Incomplete logon
Hello Experts,
I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers
I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
Database error: Unable to connect to SAP BW server Incomplete logon data -
If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
Desired outcome:
I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
Any help in this matter would be greatly appreciated.
Thanks & regards,
CD.Whether your problem is solved?
We have the same problem in BO Mobile.
Two users from one BW-role, BO-groups; one user report is executed, another user - error incomplete logon data. In Web Intelligence both users reports succeeds. -
Prerequisiteinstaller.exe error - unable to install Application Server Role, Web Server (IIS) Role
Windows Server 2012 R2 running on Hyper-V VM. File services, App server & IIS roles installed
SQL Server 2012 installed
Tried:
kb 2765260 method 1 which is kb 2771431 which ends with "not applicable to computer"
kb 2765260 method 2 with no effect (this was power shell commands for PC's connected to the internet)
One post suggested "aspnet_regii - enable -i" but my OS doesn't have aspnet_regii on it (not sure what that implies)
One post suggested ServerManagerCmd.exe needed to be installed which sounds true as shown below (but where do I find this exe?)
There are some errors in the log file, I only included the portions where the errors are listed. The initial lines are at the top of the log file, then I skipped to the section where the other errors were. I can include the whole log if
it becomes necessary.
9:47:11 Processor architecture is (9)
9:47:11 Reading the following string value/name...
9:47:11 Common Startup
9:47:11 from the following registry location...
9:47:11 SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
9:47:11 The value is...
9:47:11 C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
9:47:11 Trying to remove the startup task if there is any.
9:47:11 C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
9:47:11 Error: Startup task doesn't exist. This is not a continuation after a restart.
9:47:11 Locating the following command line arguments file:
9:47:11 E:\PrerequisiteInstaller.Arguments.txt
9:47:11 Error: This file does not exist
9:47:11 Details of the current operating system:
9:47:11 Check whether the following prerequisite is installed:
9:47:11 Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
9:47:11 Reading the following DWORD value/name...
9:47:11 IsInstalled
9:47:11 from the following registry location...
9:47:11 SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
9:47:17 Beginning download/installation
9:47:17 Created thread for installer
9:47:17 "C:\Windows\system32\ServerManagerCmd.exe" -inputpath "C:\Users\ADMINI~1\AppData\Local\Temp\1\PreE0DB.tmp.XML"
9:47:17 Error: Unable to install (2)
9:47:17 Error: [In HRESULT format] (-2147024894)
9:47:17 Last return code (2)
9:47:17 Reading the following DWORD value/name...
9:47:17 Flags
9:47:17 from the following registry location...
9:47:17 SOFTWARE\Microsoft\Updates\UpdateExeVolatile
9:47:17 Reading the following string value/name...
9:47:17 PendingFileRenameOperations
9:47:17 from the following registry location...
9:47:17 SYSTEM\CurrentControlSet\Control\Session Manager
9:47:17 Reading the following registry location...
9:47:17 SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
9:47:17 Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
9:47:17 Last return code (2)
9:47:17 Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any command line options.
9:47:17 Cannot retry
I'm presuming the first 2 errors are OK and just indicate optional startup modes for prerequisiteinstaller.exe
The 2nd set of errors seems more serious. I don't see ServerManagerCmd.exe on my PC that's listed in the error
I don't understand the last error which I'm supposing triggered the listed error even though there are other errors in the log.
Many of the existing posts don't match the configuration I'm using, and the ones that do match didn't seem to provide a usable answer. Any help is appreciated. Do these problems exist using Sever 2012 Standard? I will try that, but would
like to resolve the issue here with R2.
Thanks.
Best Regards,
AlanServerManagerCMD.exe is a deprecated utility and (as far as I know) is only found on Server 2008 versions, so I'm surprised it's needed for the preinstaller. Are you trying to install SharePoint 2010?
Running this page through Google Translate should give you an clearer idea on getting this installed.
http://blog.hand-net.com/sharepoint/2010-06-10-error-lors-de-linstallation-des-office-web-apps-2010-sur-windows-7.htm
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem. -
[SOLVED] Rad 7790+Catalyst = Error: unable to open display (null)
Radeon HD 7790 + Catalyst = Error: unable to open display (null)
Greetings,
I've installed Arch 2 days ago(migrated from Fedora), but I'm still a newbie to linux, so please have patience.
I've bought AMD Radeon HD 7790 recently and decided that it's time to upgrade system, but since then I had only problems with it. No LiveCD I tried (Fedora 20, Mint) worked properly in graphics mode, so I suspected problem in built-in drivers and moved to linux with text-only installation (Arch), so I could install drivers later.
I've followed wiki manual and installed catalyst, removed open source driver, added nomodeset parametr to GRUB etc. but I'm still stucked, because Xorg won't start(black screen and errors presented in Logs). Tried googling, but learned nothing except Radeon proprietary drivers are comparable to suicide.
Versions:
Kernel: 3-10.40-1-lts (catalyst_build_module sucessful)
Catalyst: 14.4-10
Xorg: 1.14.5-11
Logs&Configs:
lsmod
fglrx 8672295 0
amd_iommu_v2 7174 1 fglrx
button 4765 1 fglrx
fglrxinfo
Error: unable to open display (null)
Xorg.0.conf
[ 2632.576]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 2632.594] X Protocol Version 11, Revision 0
[ 2632.600] Build Operating System: Linux 3.12.6-1-ARCH x86_64
[ 2632.606] Current Operating System: Linux localhost 3.10.40-1-lts #1 SMP Tue May 13 12:50:03 UTC 2014 x86_64
[ 2632.606] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=4f60e723-44e9-4264-8d6c-ca62c43cf69c rw quiet nomodeset
[ 2632.619] Build Date: 08 January 2014 01:35:51PM
[ 2632.629]
[ 2632.635] Current version of pixman: 0.32.4
[ 2632.646] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2632.646] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2632.671] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 25 00:53:45 2014
[ 2632.677] (==) Using config file: "/etc/X11/xorg.conf"
[ 2632.684] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2632.690] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2632.690] (==) ServerLayout "aticonfig Layout"
[ 2632.690] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 2632.690] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 2632.690] (**) | |-->Device "aticonfig-Device[0]-0"
[ 2632.690] (==) Automatically adding devices
[ 2632.690] (==) Automatically enabling devices
[ 2632.690] (==) Automatically adding GPU devices
[ 2632.690] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 2632.690] Entry deleted from font path.
[ 2632.690] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2632.690] Entry deleted from font path.
[ 2632.690] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2632.690] Entry deleted from font path.
[ 2632.690] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2632.690] Entry deleted from font path.
[ 2632.690] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2632.690] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2632.690] Entry deleted from font path.
[ 2632.690] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2632.690] (==) FontPath set to:
/usr/share/fonts/misc/
[ 2632.690] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2632.690] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2632.690] (II) Loader magic: 0x7fac20
[ 2632.690] (II) Module ABI versions:
[ 2632.690] X.Org ANSI C Emulation: 0.4
[ 2632.690] X.Org Video Driver: 14.1
[ 2632.690] X.Org XInput driver : 19.1
[ 2632.691] X.Org Server Extension : 7.0
[ 2632.692] (--) PCI:*(0:2:0:0) 1002:665c:1458:226a rev 0, Mem @ 0xc0000000/268435456, 0xde800000/8388608, 0xdffc0000/262144, I/O @ 0x0000e800/256, BIOS @ 0x????????/131072
[ 2632.698] Initializing built-in extension Generic Event Extension
[ 2632.704] Initializing built-in extension SHAPE
[ 2632.710] Initializing built-in extension MIT-SHM
[ 2632.717] Initializing built-in extension XInputExtension
[ 2632.723] Initializing built-in extension XTEST
[ 2632.728] Initializing built-in extension BIG-REQUESTS
[ 2632.734] Initializing built-in extension SYNC
[ 2632.740] Initializing built-in extension XKEYBOARD
[ 2632.745] Initializing built-in extension XC-MISC
[ 2632.751] Initializing built-in extension SECURITY
[ 2632.756] Initializing built-in extension XINERAMA
[ 2632.761] Initializing built-in extension XFIXES
[ 2632.767] Initializing built-in extension RENDER
[ 2632.772] Initializing built-in extension RANDR
[ 2632.777] Initializing built-in extension COMPOSITE
[ 2632.782] Initializing built-in extension DAMAGE
[ 2632.787] Initializing built-in extension MIT-SCREEN-SAVER
[ 2632.792] Initializing built-in extension DOUBLE-BUFFER
[ 2632.797] Initializing built-in extension RECORD
[ 2632.802] Initializing built-in extension DPMS
[ 2632.806] Initializing built-in extension X-Resource
[ 2632.811] Initializing built-in extension XVideo
[ 2632.816] Initializing built-in extension XVideo-MotionCompensation
[ 2632.821] Initializing built-in extension XFree86-VidModeExtension
[ 2632.825] Initializing built-in extension XFree86-DGA
[ 2632.830] Initializing built-in extension XFree86-DRI
[ 2632.834] Initializing built-in extension DRI2
[ 2632.834] (II) "glx" will be loaded by default.
[ 2632.834] (II) LoadModule: "glx"
[ 2632.834] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2632.835] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 2632.835] compiled for 6.9.0, module version = 1.0.0
[ 2632.839] Loading extension GLX
[ 2632.839] (II) LoadModule: "fglrx"
[ 2632.839] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 2632.863] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 2632.863] compiled for 1.4.99.906, module version = 14.10.2
[ 2632.863] Module class: X.Org Video Driver
[ 2632.863] (II) Loading sub module "fglrxdrm"
[ 2632.863] (II) LoadModule: "fglrxdrm"
[ 2632.863] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 2632.863] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 2632.863] compiled for 1.4.99.906, module version = 14.10.2
[ 2632.863] (II) AMD Proprietary Linux Driver Version Identifier:14.10.2
[ 2632.864] (II) AMD Proprietary Linux Driver Release Identifier: 14.10.1006
[ 2632.864] (II) AMD Proprietary Linux Driver Build Date: Apr 17 2014 21:15:33
[ 2632.864] (--) using VT number 2
[ 2632.885] (WW) Falling back to old probe method for fglrx
[ 2632.899] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 2632.901] ukiDynamicMajor: found major device number 250
[ 2632.901] ukiDynamicMajor: found major device number 250
[ 2632.901] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2632.901] ukiOpenDevice: node name is /dev/ati/card0
[ 2632.901] ukiOpenDevice: open result is 11, (OK)
[ 2632.901] ukiOpenByBusid: ukiOpenMinor returns 11
[ 2632.901] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2632.904] (--) Chipset Supported AMD Graphics Processor (0x665C) found
[ 2632.904] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
[ 2632.905] (II) fglrx(0): pEnt->device->identifier=0x11bea10
[ 2632.905] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
[ 2632.905] (II) Loading sub module "vgahw"
[ 2632.905] (II) LoadModule: "vgahw"
[ 2632.905] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 2632.905] (II) Module vgahw: vendor="X.Org Foundation"
[ 2632.906] compiled for 1.14.5, module version = 0.1.0
[ 2632.906] ABI class: X.Org Video Driver, version 14.1
[ 2632.906] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 2632.906] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 2632.906] (==) fglrx(0): Default visual is TrueColor
[ 2632.906] (**) fglrx(0): Option "DPMS" "true"
[ 2632.906] (==) fglrx(0): RGB weight 888
[ 2632.906] (II) fglrx(0): Using 8 bits per RGB
[ 2632.906] (==) fglrx(0): Buffer Tiling is ON
[ 2632.906] (II) Loading sub module "fglrxdrm"
[ 2632.906] (II) LoadModule: "fglrxdrm"
[ 2632.906] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 2632.906] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 2632.906] compiled for 1.4.99.906, module version = 14.10.2
[ 2632.908] ukiDynamicMajor: found major device number 250
[ 2632.908] ukiDynamicMajor: found major device number 250
[ 2632.908] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2632.908] ukiOpenDevice: node name is /dev/ati/card0
[ 2632.908] ukiOpenDevice: open result is 13, (OK)
[ 2632.908] ukiOpenByBusid: ukiOpenMinor returns 13
[ 2632.908] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2632.908] (**) fglrx(0): NoAccel = NO
[ 2632.909] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 2632.909] (--) fglrx(0): Chipset: "AMD Radeon HD 7700 Series" (Chipset = 0x665c)
[ 2632.909] (--) fglrx(0): (PciSubVendor = 0x1458, PciSubDevice = 0x226a)
[ 2632.909] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 2632.909] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[ 2632.909] (--) fglrx(0): MMIO registers at 0xdffc0000
[ 2632.909] (--) fglrx(0): I/O port at 0x0000e800
[ 2632.909] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 2632.909] (II) fglrx(0): AC Adapter is used
[ 2632.914] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 2632.914] (II) Loading sub module "vbe"
[ 2632.914] (II) LoadModule: "vbe"
[ 2632.915] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 2632.915] (II) Module vbe: vendor="X.Org Foundation"
[ 2632.915] compiled for 1.14.5, module version = 1.1.0
[ 2632.915] ABI class: X.Org Video Driver, version 14.1
[ 2632.915] (II) fglrx(0): VESA BIOS detected
[ 2632.915] (II) fglrx(0): VESA VBE Version 3.0
[ 2632.915] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 2632.915] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 2632.915] (II) fglrx(0): VESA VBE OEM Software Rev: 15.32
[ 2632.915] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 2632.915] (II) fglrx(0): VESA VBE OEM Product: BONAIRE
[ 2632.915] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 2632.915] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 2632.915] (--) fglrx(0): Video RAM: 2097152 kByte, Type: GDDR5
[ 2632.915] (II) fglrx(0): PCIE card detected
[ 2632.915] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 2632.915] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 2632.915] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
[ 2632.915] (II) fglrx(0): RandR 1.2 support is enabled!
[ 2632.915] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 2632.915] (II) Loading sub module "fb"
[ 2632.915] (II) LoadModule: "fb"
[ 2632.916] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2632.916] (II) Module fb: vendor="X.Org Foundation"
[ 2632.916] compiled for 1.14.5, module version = 1.0.0
[ 2632.916] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2632.916] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 2632.916] (II) Loading sub module "ddc"
[ 2632.916] (II) LoadModule: "ddc"
[ 2632.916] (II) Module "ddc" already built-in
[ 2633.034] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 2633.034] (II) fglrx(0): Output DFP2 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP3 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP4 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP5 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP6 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP7 has no monitor section
[ 2633.034] (II) fglrx(0): Output CRT1 has no monitor section
[ 2633.034] (II) Loading sub module "ddc"
[ 2633.034] (II) LoadModule: "ddc"
[ 2633.034] (II) Module "ddc" already built-in
[ 2633.034] (II) fglrx(0): Connected Display0: CRT1
[ 2633.034] (II) fglrx(0): Display0 EDID data ---------------------------
[ 2633.034] (II) fglrx(0): Manufacturer: GSM Model: 4b31 Serial#: 78077
[ 2633.034] (II) fglrx(0): Year: 2007 Week: 7
[ 2633.034] (II) fglrx(0): EDID Version: 1.3
[ 2633.034] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 2633.034] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
[ 2633.034] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
[ 2633.034] (II) fglrx(0): Gamma: 2.20
[ 2633.034] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 2633.034] (II) fglrx(0): First detailed timing is preferred mode
[ 2633.034] (II) fglrx(0): redX: 0.639 redY: 0.342 greenX: 0.297 greenY: 0.615
[ 2633.034] (II) fglrx(0): blueX: 0.146 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
[ 2633.034] (II) fglrx(0): Supported established timings:
[ 2633.034] (II) fglrx(0): 720x400@70Hz
[ 2633.034] (II) fglrx(0): 640x480@60Hz
[ 2633.034] (II) fglrx(0): 640x480@67Hz
[ 2633.034] (II) fglrx(0): 640x480@72Hz
[ 2633.034] (II) fglrx(0): 640x480@75Hz
[ 2633.034] (II) fglrx(0): 800x600@56Hz
[ 2633.034] (II) fglrx(0): 800x600@60Hz
[ 2633.034] (II) fglrx(0): 800x600@72Hz
[ 2633.034] (II) fglrx(0): 800x600@75Hz
[ 2633.034] (II) fglrx(0): 832x624@75Hz
[ 2633.034] (II) fglrx(0): 1024x768@60Hz
[ 2633.034] (II) fglrx(0): 1024x768@70Hz
[ 2633.034] (II) fglrx(0): 1024x768@75Hz
[ 2633.035] (II) fglrx(0): 1280x1024@75Hz
[ 2633.035] (II) fglrx(0): 1152x864@75Hz
[ 2633.035] (II) fglrx(0): Manufacturer's mask: 0
[ 2633.035] (II) fglrx(0): Supported standard timings:
[ 2633.035] (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
[ 2633.035] (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
[ 2633.035] (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
[ 2633.035] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 2633.035] (II) fglrx(0): Supported detailed timing:
[ 2633.035] (II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 2633.035] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 2633.035] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 2633.035] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[ 2633.035] (II) fglrx(0): Monitor name: L1918S
[ 2633.035] (II) fglrx(0): Monitor name:
[ 2633.035] (II) fglrx(0): EDID (in hex):
[ 2633.035] (II) fglrx(0): 00ffffffffffff001e6d314bfd300100
[ 2633.035] (II) fglrx(0): 071101036e261e78eaa2a5a3574c9d25
[ 2633.035] (II) fglrx(0): 115054bfef80314f454f614f81800101
[ 2633.035] (II) fglrx(0): 010101010101302a009851002a403070
[ 2633.035] (II) fglrx(0): 1300782d1100001e000000fd00384b1e
[ 2633.035] (II) fglrx(0): 530e000a202020202020000000fc004c
[ 2633.035] (II) fglrx(0): 31393138530a202020202020000000fc
[ 2633.035] (II) fglrx(0): 00200a202020202020202020202000e7
[ 2633.035] (II) fglrx(0): End of Display0 EDID data --------------------
[ 2633.035] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 2633.036] (II) fglrx(0): EDID for output DFP1
[ 2633.036] (II) fglrx(0): EDID for output DFP2
[ 2633.036] (II) fglrx(0): EDID for output DFP3
[ 2633.036] (II) fglrx(0): EDID for output DFP4
[ 2633.036] (II) fglrx(0): EDID for output DFP5
[ 2633.036] (II) fglrx(0): EDID for output DFP6
[ 2633.036] (II) fglrx(0): EDID for output DFP7
[ 2633.036] (II) fglrx(0): EDID for output CRT1
[ 2633.036] (II) fglrx(0): Manufacturer: GSM Model: 4b31 Serial#: 78077
[ 2633.036] (II) fglrx(0): Year: 2007 Week: 7
[ 2633.036] (II) fglrx(0): EDID Version: 1.3
[ 2633.036] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 2633.036] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
[ 2633.036] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
[ 2633.036] (II) fglrx(0): Gamma: 2.20
[ 2633.036] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 2633.036] (II) fglrx(0): First detailed timing is preferred mode
[ 2633.036] (II) fglrx(0): redX: 0.639 redY: 0.342 greenX: 0.297 greenY: 0.615
[ 2633.036] (II) fglrx(0): blueX: 0.146 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
[ 2633.036] (II) fglrx(0): Supported established timings:
[ 2633.036] (II) fglrx(0): 720x400@70Hz
[ 2633.036] (II) fglrx(0): 640x480@60Hz
[ 2633.036] (II) fglrx(0): 640x480@67Hz
[ 2633.036] (II) fglrx(0): 640x480@72Hz
[ 2633.036] (II) fglrx(0): 640x480@75Hz
[ 2633.036] (II) fglrx(0): 800x600@56Hz
[ 2633.036] (II) fglrx(0): 800x600@60Hz
[ 2633.036] (II) fglrx(0): 800x600@72Hz
[ 2633.036] (II) fglrx(0): 800x600@75Hz
[ 2633.036] (II) fglrx(0): 832x624@75Hz
[ 2633.037] (II) fglrx(0): 1024x768@60Hz
[ 2633.037] (II) fglrx(0): 1024x768@70Hz
[ 2633.037] (II) fglrx(0): 1024x768@75Hz
[ 2633.037] (II) fglrx(0): 1280x1024@75Hz
[ 2633.037] (II) fglrx(0): 1152x864@75Hz
[ 2633.037] (II) fglrx(0): Manufacturer's mask: 0
[ 2633.037] (II) fglrx(0): Supported standard timings:
[ 2633.037] (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
[ 2633.037] (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
[ 2633.037] (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
[ 2633.037] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 2633.037] (II) fglrx(0): Supported detailed timing:
[ 2633.037] (II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 2633.037] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 2633.037] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 2633.037] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[ 2633.037] (II) fglrx(0): Monitor name: L1918S
[ 2633.037] (II) fglrx(0): Monitor name:
[ 2633.037] (II) fglrx(0): EDID (in hex):
[ 2633.037] (II) fglrx(0): 00ffffffffffff001e6d314bfd300100
[ 2633.037] (II) fglrx(0): 071101036e261e78eaa2a5a3574c9d25
[ 2633.037] (II) fglrx(0): 115054bfef80314f454f614f81800101
[ 2633.037] (II) fglrx(0): 010101010101302a009851002a403070
[ 2633.037] (II) fglrx(0): 1300782d1100001e000000fd00384b1e
[ 2633.037] (II) fglrx(0): 530e000a202020202020000000fc004c
[ 2633.037] (II) fglrx(0): 31393138530a202020202020000000fc
[ 2633.037] (II) fglrx(0): 00200a202020202020202020202000e7
[ 2633.037] (II) fglrx(0): Printing probed modes for output CRT1
[ 2633.037] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 2633.037] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x960"x75.0 135.00 1280 1296 1440 1688 960 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1328 1440 1688 960 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x768"x75.0 135.00 1280 1296 1440 1688 768 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1328 1440 1688 768 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x720"x75.0 135.00 1280 1296 1440 1688 720 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1328 1440 1688 720 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "640x480"x67.0 27.28 640 664 728 816 480 481 484 499 -hsync +vsync (33.4 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 2633.037] (II) fglrx(0): Output DFP1 disconnected
[ 2633.037] (II) fglrx(0): Output DFP2 disconnected
[ 2633.037] (II) fglrx(0): Output DFP3 disconnected
[ 2633.037] (II) fglrx(0): Output DFP4 disconnected
[ 2633.037] (II) fglrx(0): Output DFP5 disconnected
[ 2633.038] (II) fglrx(0): Output DFP6 disconnected
[ 2633.038] (II) fglrx(0): Output DFP7 disconnected
[ 2633.038] (II) fglrx(0): Output CRT1 connected
[ 2633.038] (II) fglrx(0): Using exact sizes for initial modes
[ 2633.038] (II) fglrx(0): Output CRT1 using initial mode 1280x1024
[ 2633.038] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2633.038] (II) fglrx(0): DPI set to (96, 96)
[ 2633.038] (II) fglrx(0): Eyefinity capable adapter detected.
[ 2633.038] (II) fglrx(0): Adapter AMD Radeon HD 7700 Series has 6 configurable heads and 1 displays connected.
[ 2633.038] (==) fglrx(0): PseudoColor visuals disabled
[ 2633.038] (II) Loading sub module "ramdac"
[ 2633.038] (II) LoadModule: "ramdac"
[ 2633.038] (II) Module "ramdac" already built-in
[ 2633.038] (==) fglrx(0): NoDRI = NO
[ 2633.038] (==) fglrx(0): Capabilities: 0x00000000
[ 2633.038] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 2633.038] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 2633.038] (==) fglrx(0): UseFastTLS=0
[ 2633.038] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 2633.038] (--) Depth 24 pixmap format is 32 bpp
[ 2633.038] Loading extension ATIFGLRXDRI
[ 2633.038] (II) fglrx(0): doing swlDriScreenInit
[ 2633.038] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 2633.039] ukiDynamicMajor: found major device number 250
[ 2633.039] ukiDynamicMajor: found major device number 250
[ 2633.039] ukiDynamicMajor: found major device number 250
[ 2633.039] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2633.039] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.039] ukiOpenDevice: open result is 14, (OK)
[ 2633.039] ukiOpenByBusid: ukiOpenMinor returns 14
[ 2633.039] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2633.039] (II) fglrx(0): [uki] DRM interface version 1.0
[ 2633.039] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0"
[ 2633.039] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x3c000
[ 2633.039] (II) fglrx(0): [uki] mapped SAREA 0x3c000 to 0x7f000fd0d000
[ 2633.039] (II) fglrx(0): [uki] framebuffer handle = 0x3d000
[ 2633.039] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 2633.039] (II) fglrx(0): swlDriScreenInit done
[ 2633.039] (II) fglrx(0): Kernel Module Version Information:
[ 2633.039] (II) fglrx(0): Name: fglrx
[ 2633.039] (II) fglrx(0): Version: 14.10.2
[ 2633.039] (II) fglrx(0): Date: Apr 17 2014
[ 2633.039] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 2633.039] (II) fglrx(0): Kernel Module version matches driver.
[ 2633.039] (II) fglrx(0): Kernel Module Build Time Information:
[ 2633.039] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.10.40-1-lts
[ 2633.039] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 2633.039] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 2633.039] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 2633.039] (II) fglrx(0): [uki] register handle = 0x0003e000
[ 2633.040] (II) fglrx(0): DRI initialization successfull
[ 2633.040] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x01040000
[ 2633.041] (==) fglrx(0): Backing store disabled
[ 2633.041] Loading extension FGLRXEXTENSION
[ 2633.041] (**) fglrx(0): DPMS enabled
[ 2633.041] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 2633.041] (**) fglrx(0): Textured Video is enabled.
[ 2633.041] (II) LoadModule: "glesx"
[ 2633.042] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 2633.043] (II) Module glesx: vendor="X.Org Foundation"
[ 2633.043] compiled for 1.4.99.906, module version = 1.0.0
[ 2633.043] Loading extension GLESX
[ 2633.043] (II) fglrx(0): GLESX enableFlags = 8784
[ 2633.043] (II) fglrx(0): GLESX is enabled
[ 2633.043] (II) LoadModule: "amdxmm"
[ 2633.043] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 2633.043] (II) Module amdxmm: vendor="X.Org Foundation"
[ 2633.043] compiled for 1.4.99.906, module version = 2.0.0
[ 2633.055] Loading extension AMDXVOPL
[ 2633.055] Loading extension AMDXVBA
[ 2633.055] (II) fglrx(0): Enable composite support successfully
[ 2633.055] (WW) fglrx(0): Option "VendorName" is not used
[ 2633.055] (WW) fglrx(0): Option "ModelName" is not used
[ 2633.055] (II) fglrx(0): X context handle = 0x1
[ 2633.055] (II) fglrx(0): [DRI] installation complete
[ 2633.055] (==) fglrx(0): Silken mouse enabled
[ 2633.056] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 2633.056] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2633.414] (--) RandR disabled
[ 2633.432] ukiDynamicMajor: found major device number 250
[ 2633.432] ukiDynamicMajor: found major device number 250
[ 2633.432] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2633.432] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.432] ukiOpenDevice: open result is 15, (OK)
[ 2633.432] ukiOpenByBusid: ukiOpenMinor returns 15
[ 2633.432] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2633.432] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 2633.443] ukiDynamicMajor: found major device number 250
[ 2633.443] ukiDynamicMajor: found major device number 250
[ 2633.443] ukiDynamicMajor: found major device number 250
[ 2633.443] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.443] ukiOpenDevice: open result is 16, (OK)
[ 2633.443] ukiGetBusid returned 'PCI:2:0:0'
[ 2633.443] ukiOpenDevice: node name is /dev/ati/card1
[ 2633.443] ukiOpenDevice: open result is -1, (No such device)
[ 2633.443] ukiOpenDevice: open result is -1, (No such device)
[ 2633.443] ukiOpenDevice: Open failed
[ 2633.443] ukiOpenDevice: node name is /dev/ati/card2
[ 2633.443] ukiOpenDevice: open result is -1, (No such device)
[ 2633.443] ukiOpenDevice: open result is -1, (No such device)
[ 2633.443] ukiOpenDevice: Open failed
[ 2633.443] ukiOpenDevice: node name is /dev/ati/card3
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card4
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card5
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card6
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card7
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card8
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card9
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card10
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card11
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card12
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card13
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: Open failed
[ 2633.446] ukiOpenDevice: node name is /dev/ati/card14
[ 2633.446] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: Open failed
[ 2633.446] ukiOpenDevice: node name is /dev/ati/card15
[ 2633.446] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: Open failed
[ 2633.446] ukiDynamicMajor: found major device number 250
[ 2633.446] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2633.446] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.446] ukiOpenDevice: open result is 16, (OK)
[ 2633.446] ukiOpenByBusid: ukiOpenMinor returns 16
[ 2633.446] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2633.525] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 2633.526] ukiDynamicMajor: found major device number 250
[ 2633.526] ukiDynamicMajor: found major device number 250
[ 2633.526] ukiDynamicMajor: found major device number 250
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.526] ukiOpenDevice: open result is 17, (OK)
[ 2633.526] ukiGetBusid returned 'PCI:2:0:0'
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card1
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card2
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card3
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card4
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card5
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card6
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card7
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card8
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card9
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card10
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card11
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card12
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card13
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card14
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card15
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiDynamicMajor: found major device number 250
[ 2633.527] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.527] ukiOpenDevice: open result is 17, (OK)
[ 2633.527] ukiOpenByBusid: ukiOpenMinor returns 17
[ 2633.527] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2633.546] (II) fglrx(0): OverDrive6 Detected!
[ 2633.551] (II) fglrx(0): Setting screen physical size to 338 x 270
[ 2633.594] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 2633.594] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2633.594] (II) LoadModule: "evdev"
[ 2633.595] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2633.595] (II) Module evdev: vendor="X.Org Foundation"
[ 2633.595] compiled for 1.14.3, module version = 2.8.2
[ 2633.595] Module class: X.Org XInput Driver
[ 2633.595] ABI class: X.Org XInput driver, version 19.1
[ 2633.595] (II) Using input driver 'evdev' for 'Power Button'
[ 2633.595] (**) Power Button: always reports core events
[ 2633.595] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 2633.595] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2633.595] (--) evdev: Power Button: Found keys
[ 2633.595] (II) evdev: Power Button: Configuring as keyboard
[ 2633.595] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 2633.595] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2633.595] (**) Option "xkb_rules" "evdev"
[ 2633.595] (**) Option "xkb_model" "pc104"
[ 2633.595] (**) Option "xkb_layout" "us"
[ 2633.634] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2633.634] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2633.634] (II) Using input driver 'evdev' for 'Power Button'
[ 2633.634] (**) Power Button: always reports core events
[ 2633.634] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 2633.634] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2633.634] (--) evdev: Power Button: Found keys
[ 2633.634] (II) evdev: Power Button: Configuring as keyboard
[ 2633.634] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 2633.634] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 2633.634] (**) Option "xkb_rules" "evdev"
[ 2633.634] (**) Option "xkb_model" "pc104"
[ 2633.634] (**) Option "xkb_layout" "us"
[ 2633.635] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 2633.635] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc051
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2633.635] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input1/event1"
[ 2633.635] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 8)
[ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 2633.635] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 2633.635] (II) No input driver specified, ignoring this device.
[ 2633.636] (II) This device may have been added with another device file.
[ 2633.636] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 2633.636] (II) No input driver specified, ignoring this device.
[ 2633.636] (II) This device may have been added with another device file.
[ 2633.636] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event6)
[ 2633.636] (II) No input driver specified, ignoring this device.
[ 2633.636] (II) This device may have been added with another device file.
[ 2633.636] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event7)
[ 2633.636] (II) No input driver specified, ignoring this device.
[ 2633.636] (II) This device may have been added with another device file.
[ 2633.637] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event8)
[ 2633.637] (II) No input driver specified, ignoring this device.
[ 2633.637] (II) This device may have been added with another device file.
[ 2633.637] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=10 (/dev/input/event10)
[ 2633.637] (II) No input driver specified, ignoring this device.
[ 2633.637] (II) This device may have been added with another device file.
[ 2633.637] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=9 (/dev/input/event11)
[ 2633.637] (II) No input driver specified, ignoring this device.
[ 2633.637] (II) This device may have been added with another device file.
[ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=8 (/dev/input/event12)
[ 2633.638] (II) No input driver specified, ignoring this device.
[ 2633.638] (II) This device may have been added with another device file.
[ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=7 (/dev/input/event13)
[ 2633.638] (II) No input driver specified, ignoring this device.
[ 2633.638] (II) This device may have been added with another device file.
[ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event14)
[ 2633.638] (II) No input driver specified, ignoring this device.
[ 2633.638] (II) This device may have been added with another device file.
[ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=11 (/dev/input/event9)
[ 2633.639] (II) No input driver specified, ignoring this device.
[ 2633.639] (II) This device may have been added with another device file.
[ 2633.639] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2633.639] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2633.639] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2633.639] (**) AT Translated Set 2 keyboard: always reports core events
[ 2633.639] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2633.639] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2633.639] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2633.639] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2633.639] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2633.639] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 2633.639] (**) Option "xkb_rules" "evdev"
[ 2633.639] (**) Option "xkb_model" "pc104"
[ 2633.639] (**) Option "xkb_layout" "us"
[ 2633.640] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 2633.640] (II) No input driver specified, ignoring this device.
[ 2633.640] (II) This device may have been added with another device file.
[ 2635.885] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 2639.300] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 2639.300] (II) fglrx(0): Backup framebuffer data.
[ 2639.333] (II) fglrx(0): Backup complete.
[ 2653.729] (II) evdev: AT Translated Set 2 keyboard: Close
[ 2653.730] (II) UnloadModule: "evdev"
[ 2653.730] (II) evdev: Logitech USB-PS/2 Optical Mouse: Close
[ 2653.730] (II) UnloadModule: "evdev"
[ 2653.730] (II) evdev: Power Button: Close
[ 2653.730] (II) UnloadModule: "evdev"
[ 2653.730] (II) evdev: Power Button: Close
[ 2653.730] (II) UnloadModule: "evdev"
[ 2653.732] (II) fglrx(0): Shutdown CMMQS
[ 2653.735] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[ 2653.735] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x3c000 at 0x7f000fd0d000
[ 2653.735] (EE)
[ 2653.740] (EE) Backtrace:
[ 2653.745] (EE) 0: Xorg (xorg_backtrace+0x3d) [0x57e04d]
[ 2653.750] (EE) 1: Xorg (0x400000+0x181da9) [0x581da9]
[ 2653.754] (EE) 2: /usr/lib/libpthread.so.0 (0x7f000f1e8000+0xf4b0) [0x7f000f1f74b0]
[ 2653.759] (EE) 3: /usr/lib/libpciaccess.so.0 (0x7f000f406000+0x503e) [0x7f000f40b03e]
[ 2653.765] (EE) 4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (amd_xs113_int10_x_inb+0x46) [0x7f000bb46126]
[ 2653.771] (EE) 5: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0x9e2e05) [0x7f000bb3ee05]
[ 2653.776] (EE) 6: /usr/lib/xorg/modules/drivers/fglrx_drv.so (X86EMU_exec+0xa5) [0x7f000bb32555]
[ 2653.782] (EE) 7: /usr/lib/xorg/modules/drivers/fglrx_drv.so (amd_xs113_int10_xf86ExecX86int10+0x46) [0x7f000bb47286]
[ 2653.788] (EE) 8: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xf86ExecX86int10+0xd) [0x7f000b56897d]
[ 2653.793] (EE) 9: /usr/lib/xorg/modules/libvbe.so (VBESetVBEMode+0x9d) [0x7f000ab0163d]
[ 2653.799] (EE) 10: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0x441623) [0x7f000b59d623]
[ 2653.805] (EE) 11: /usr/lib/xorg/modules/drivers/fglrx_drv.so (atiddxVBESetConsoleMode+0x44) [0x7f000b59d474]
[ 2653.811] (EE) 12: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs114_atiddxFreeScreen+0x73e) [0x7f000b6ffc1e]
[ 2653.817] (EE) 13: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs114_atiddxCloseScreen+0x321) [0x7f000b6ff241]
[ 2653.823] (EE) 14: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0xa4a846) [0x7f000bba6846]
[ 2653.828] (EE) 15: Xorg (0x400000+0xc3136) [0x4c3136]
[ 2653.833] (EE) 16: Xorg (0x400000+0x106964) [0x506964]
[ 2653.838] (EE) 17: Xorg (0x400000+0x24cd7) [0x424cd7]
[ 2653.843] (EE) 18: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f000e058000]
[ 2653.848] (EE) 19: Xorg (0x400000+0x24f0f) [0x424f0f]
[ 2653.857] (EE)
[ 2653.861] (EE) Segmentation fault at address 0x0
[ 2653.866] (EE)
Fatal server error:
[ 2653.874] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 2653.878] (EE)
[ 2653.883] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2653.899] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 2653.904] (EE)
[ 2653.908] (EE) Server terminated with error (1). Closing log file.
xorg.conf
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
I'm sure that the main problem is between keyboard and chair, but I'd like to know, what's wrong with pc
Thanks for your efforts.
Last edited by Mytrin (2014-05-25 19:09:02)I've managed to solve this error:
(EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory
There was missing library and few directories, which I found according to this http://www.reddit.com/r/archlinux/comme … _correctly at /usr/lib/dri, so I had to just symlink it. However, "unable to open display" error is still annoying me and Xorg is not working.
EDIT: Found EE about missing commands in new Xorg.0.log and installed xterm to solve this. Now I don't have entirely black screen after startx. There is white rectangular terminal and fglrxinfo seems to be all right as it detected my Radeon and OpenGL. Now I have to install some DE, but that's another story. Marking as [SOLVED] and once again thanks to clfarron4 for reply.
Last edited by Mytrin (2014-05-25 19:06:09)
Maybe you are looking for
-
Open Letter to Palm Regarding the Palm Treo 755p
Dear Palm, As a devoted Palm user for the past 15+ years, I have been praising the versatility, convenience and user friendly Palm hardware/software to my colleagues and family for as many years. As a result many have purchased Palm products and have
-
How to tell if you are buying a full version or upgrade
buying adobe premiere pro cs3 - how can you tell from the numbers on the packaging if it is a full version (commercial) or educational or just an upgrade, I was on hold for nearly 2 hours with adobe customer service and nobody picked up. cheers
-
How To create a Buffer Application Program in LabVIEW?
Dear all: Can someone advise me on how to implement a buffer application for LabVIEW. Basically I have 2 application programs than run continously in paralell. 1) LabVIEW Data Logging & Plotting Program. It takes 90 ms to excute its code 2) C++ Data
-
About using hibernate with mysql
hi all, i have used hibernate with hsqldb(database given by default) and it works fine.but when i tried to use it with mysql then i have encountered a problem xception org.hibernate.TransactionException: Transaction not successfully started org.
-
Issue while installing Exchange 2010 SP3 in SBS 2011
I tried installing the SP3 on my SBS 2011 box but it asked for a Hotfix from KB2550886 to be installed. When I tried to install the Hotfix it said that it does not apply to my SBS 2011 box and did not install. However I went ahead with the installati