Error Uncompressing using the Zip Package

Hi There,
I have xml data that I have been compressing into a byte array and writing to a file. I use the deflater to compress the data and then the inflater to uncompress the data.
This has been working fine for some time but now I have found a couple of cases where I get the following exception when I am uncompressing data.
java.util.zip.DataFormatException: incorrect data check
at java.util.zip.Inflater.inflateBytes(Native Method)
at java.util.zip.Inflater.inflate(Unknown Source)
at java.util.zip.Inflater.inflate(Unknown Source)
I have no idea what is different to cause this exception.
Has someone experienced this hardship?
Is there a limitation of this package that I might be suffering from?
thanks for any info.

Are you working on the US payroll?
Looks like some issue with regards to the address.
Where exactly do you get this error?
regards,
Sandeep

Similar Messages

Cisco 3640 - Error : Uncompression of the image failed.

Having a problem booting my Cisco 3640 Router and get the following errors in boot "rommon" mode:
Error : Uncompression of the image failed.
invalid compressed data--format violated
Error : zip decompress failed
Does anyone know what might cause this and what I can do to get it booted up into IOS?
Thanks, Scott

Update - I have already tried uploading a new image to flash: using the rommon> xmodem command and got the same results. Thinking that my flash SIMM card was toast, I then tried installing the IOS image from a PCMCIA Smart card. Again, got the same errors. Anyone know what might cause these errors and how to fix them?

How to use the Client_image package

I need to use the client_image package (read_image_file, write_image_file) to do the file upload from my client pc.
we use a digtal camera to take picture and need to use the oracle 9i form webutil to insert into the form and save in 9ias.
Any samples about how I can use the webutil to upload images will be truly appreciated!
Thanks for replying!

Thanks for your reply on Oracle Forums about using webutil to perform image upload in 9i forms.
I just download the new Webutil Demo but I got the error messages:
WUC-015: Your Form must contain the following Bean for this function to be available:
Oracle.forms.webutil.clientinfo.GetClientInfo
WUC-015: Your Form must contain the following Bean for this function to be available:
Oracle.forms.webutil.fileTransfer.FileTransfer
WUC-015: Your Form must contain the following Bean for this function to be available:
Oracle.forms.webutil.browser.BrowserFunctions
I have done all the environment config. and things in FAQ
(Make sure the your environment is set up correctly; including issues such as CLASSPATH and ensure it is no longer that 512 characters.
Ensure that the WebUtil object group has been dragged onto the form.
By putting the form into visual view, ensure that you have a window called WEBUTIL_HIDDEN_WINDOW and that it contains a set of WebUtil Java Beans.
If your forms does already contain the WebUtil object group then the cause is likely to be that the triggers used internally by the bean areas are uncompiled (usually because the OLB was subclassed before the library was attached). To resolve the problem try performing a Compile All on your module (ctrl-shift-k))
The errors are still coming out and would you please let me know what I should do to solve the problem and thanks a lot!

Error while using the export utility

Dear all of
I am getting the following error while using the export utility in the Oracle database 9i
I have run the catexp.sql and catrm.sql suggested by the experts in this forum. But it did not help me. Kindly help me in solving this issue.
FOLLOWING ARE THE ERROR ----------------------------
EXP-00008: ORACLE error 942 encountered
ORA-00942: table or view does not exist
EXP-00024: Export views not installed, please notify your DBA
EXP-00000: Export terminated unsuccessfully
-----------------------------------------------------------------------------------------------------------------------------------

Can you go to this discussion please.
Re: Getting a strange error for Exp
-aijaz

ARM approval error after upgrading to SP14: Database error while using the secure store.

Dear GRC experts,
After upgrading GRC 10 to SP14, assigning manual passwords during the approval of a request, the approval process is failing.
Here is the scenario; your advice will be appreciated.
Task: Manually assign passwords to multiple systems contained in the request
Where: On the access request, go to “User System Details” tab
Issue: After approving/submitting the request, the error “Database error while using the secure store” is generated
Logs: Nothing on transactions SLG1 or ST22; however ST11 shows the error attached below:
This is the failed approval of the request:
Other scenarios executed as a workaround, and passed the password assignment this time:
The approval will work if only one password is assigned to any of the given systems. The rest of the systems get an auto-generated
password.
ARM also accepts multiple passwords when the requestor assigns passwords on the “User System Details” prior submitting a
request. The GRC admin can approve once reached for system approval.
AS FYI, “Confirm Password” is only required when creating the request but not on any other stage.
System information:
-Netweaver 7
-GRCFND_A SP14
-GRCPINW SP13
Regards,
Gustavo

SAP just delivered a note to fix this issue. The number is 2022294.

Multivalue error when using the previous() function

I am getting a multivalue error when using the previous() function on a dimension object in the report. I thought that the previous function was supposed to look at the current report and then look at the previous record's contents. How could this possibly give me a multivalue error when the value is clearly output in the previous row? Anyone have any ideas?
By the way, this is a valuable function for the types of reports that I design. The next() function would be even more valuable.
Thanks for your help.

Hi Michael,
Could you please test the following solutions it might help you to resolve the issue.
Solution1:
Use slice and dice to reset all the tables that have #multivalue in it. The only problem with this workaround is they have to do the formatting manually.
Solution2:
Also, test the issue by changing the object to dimension if it is a measure or to measure if it is a dimension.
Regards,
Sarbhjeet Kaur

How can we use the same package in our report used by some other report

how can we use the same package in our report used by some other report

Hi,
You just need to assign package while saving your report.
No extra is required providing you are aware of package to be used.

'Install App for SharePoint' There were errors when validating the App Package

Hello,
When testing with an app, I tried to add an
app event receiver before learning that remote event receiver are not allowed with
Sharepoint-hosted app. So I reseted the Handle app installed and
Web Project properties of my project and tried to redeploy and this error occurred :
'Install App for SharePoint' There were errors when validating the App Package
Something other than the project's properties have been modified but I don't know what.

I think the best way to figure real reason out is to look at ULS logs.
This is example, what I had:
Unexpected App Packaging: CreatePackage: Unexpected exception: There were errors when validating the App package: There were errors when validating the App Package. Other warnings / errors associated with this
exception: The current version of SharePoint is less than the SharePointMinVersion specified in the app manifest. CurrentVersion='15.0.4693.1000', SharePointMinVersion='16.0.0.0'.

Coder needed to wrap my .jar using the JavaFX Packager Utility

Hello-I am not a coder. I am looking for a programmer who is able to wrap my .jar using the JavaFX Packager Utility. I would like to upload my app to the Mac App Store also and need assistance doing that.
Please contact me for more details if you are able to do one or both of the above.
Thank you,
Jeff
Edited by: 929408 on Sep 9, 2012 9:16 PM

Ok. Please let me know when you are able to upload the .jar I have (packaged) to the Macintosh App Store if you would. Do you need a way to contact me? I don't know if I am able to place my email or main website here, and I don't check here often. We can work out a payment arrangement. Thank you.

TS1702 unknown error when using the app store

unknown error when using the app store

Im sorry I will try to be more clear.. and I appreciate all of ur input. Wi-fi works fine.. everything opens and functions fine on the I pad. The problem is I will click on app store or the I tunes store...it opens fine and I am able to look at and download apps etc... but after being in the appstore or I tunes store for a couple of minutes I get kicked out to the I pads home screen. Its like pushing the home button but I didn't. It only seems to do this when im in the app store or I tunes store. I have been using the chrome browser and other downloaded apps such as ebay just fine with out this problem occurring. Not sure about safari as I dont use it and use chrome instead. Um I don't think the home button its self is faulty because it works fine and as stated before this only happens when I am in the appstore or I tunes . I've only had this I pad 1 64gb wi-fi for a few days .. I got it off of ebay it was stuck in restore mode getting error code 1611. I was able to successfully Restore it with I tunes and it running ios 5.1. Seams to work great besides the problem being mentioned.

Intermittent error when using the Disco Viewer client

Hi, I have a user receiving the following intermittent error when using the Discoverer Viewer client:
“The application encountered an invalid state.
- Discoverer Beans XML Exception. Method: findNode Class: XMLUtils Error: Cannot find parent node. Parent element does not exist in XML document, looking for database_account/eul
OracleBI Discoverer Viewer was unable to find the necessary data for displaying the results of this event. Please correct any errors and try again.”
Any idea what this might be? Any help or direction would be very much appreciated! Thank you!

Hello
Is this related to a single machine or common to a single report or is it purely random?
I did a search on your behalf and came up with nothing related to this error. You may therefore need to raise the problem with Oracle Support.
Just out of curiosity which version of Discoverer are you using?
Michael

Where can i download the zip package of online tutorials training course??

where can i download the zip package of online tutorials training course??

NI offers several traditional classroom training courses and a few online ones. You can learn more by going to:
www.ni.com/custed (which redriects to:
http://sine.ni.com/apps/we/nioc.vp?cid=10282〈=US

I have a package for photographers - want like to use the complete package

I have a package for photographers - want like to use the complete package. How do I switch to the complete package at an affordable price?

Upgrade single to all Cloud http://forums.adobe.com/thread/1235382 may help

Embedding images using the TEXT_IO package

Good morning people,
I'm in the process of converting one of my client's corporate reports to an Excel format, using the "TEXT_IO" package. The client requires his logo to appear in the Excel file (for a purely aesthetic purpose).
I've tried - to no avail, might I add - to embed/insert the company's corporate logo into the generated Excel file. This logo is stored as a LONG RAW datatype in the associated JCG_EXCEL_DATA table.
Whenever I attempt to embed this logo, using the "Text_IO.Putf" built-in, Excel displays it as "Bit!+".
Do you perhaps know of a way to do this?
Here's an example of the statement used:
"Text_IO.Putf(out_file, chr(9) || :image_file);"
Thanks and regards,
Johann.

Hi,
It will not be possible to do it as it doesn't recognize it as an image.
What about going for a delimiteddata output having the header with the logo.
Please see the 6i patch 11 release notes on OTN documentation for Reports
Thanks
The Oracle Reports team

An impersonation error occurred using the security context of the current user. -- Report server is on remote server and file share folder is on local server

I have deployed a report on the server (e.g. remoteserver\reports) from my local machine. I opened the report in browser in my local machine and created a new subscription with windows file share delivery option.
But its giving an error "Failure writing file \\localserver\subscriptions\Report1.xls : An impersonation error occurred using the security context of the current user." Here "subscriptions"
is the folder which I have created in my local machine.
I followed the instructions found in the link "http://msdn.microsoft.com/en-us/library/ms157386.aspx"
Please help to solve this issue.

Hi,
Thank you for your reply.
I have followed the same process. The credentials which I have given are same as my PC. But I am getting the same error. Can you please clarify the statement "Service
account that is using for file share subscription should have write access to shared folder."
given in the above link?
I am the one who created the folder and subscribing the report, so probably I have the full write permissions to the shared folder. What is the service account in this context?
I think the problem is, I am deploying the report on the server and creating the shared folder in the local machine. I tried giving shared folder permissions to the user on the server. But my local machine is in local domain and I cant access the users on
the remote server. Do I need to create a shared folder on the server? I am new to SSRS. Please help me.
PS: I have assigned with all roles viz. Browser, Content Manager, Publisher, Report Builder etc. and My Role name (WEBSERVER\User)
is different from my local user name (domain\username) in domain.

Error Uncompressing using the Zip Package

Similar Messages

Maybe you are looking for