ERROR: Units field CURR1 for field HSL of DataSource 3FI_SL_Z3_SI is hidden

Hi all,
This is the error msg i'm getting when trying to activate the extract structure for FI-SL. Did anybody come across it? And how to unhide the HSL,ASL etc fields .. four of my fields got locked and i have no clue what made it hide. these were the fields that werent showing up in the extract structure that was generated, so i appended the extract structure with these fields .. then it asked for a reference table and structure which i provided, but wasnt able to activate it. so i deleted all the fields in the append and the datasource all together. Now when trying to assign a datasource to the ledger ... this is the msg i'm getting for all the fields i tried to include in the append. How can i get rid of the msg(unhide) the fields and what is the right way of appending fields(currency, unit) to the extract structure?
Any help is appreciated.
Thanks in Advance.
Mav.

You must send the unit/currency with a quantity/amount field, so
- they must be defined in the structure/view behind your customer datasource,
- they must be hidden or not together,
Change  the hidden flag via RSA6 or RSO2.
Regards,
Raymond

Similar Messages

  • Error in DTP creation for a flat file datasource

    Hi SDN friends,
    Please if somebody can give me a help with this, it will be very appreciate.
    I have a DTP to load attributes master data into an infoobject. The master data comes from a flat file (data source flat file) .
    The extraction mode is full, when I try to modify any selection in the "Update" tab, a message "Enter valid value" shows, but it doesn't give me any hint about which is the wrong value that must be checked.
    The message ID is 00 002 and the and the text is the following
    Enter a valid value
    Message no. 00002
    Procedure
    Display the allowed values with F4 and correct your entry.
    I think it may be something related to the flatfile datasource. Are there any special considerations to create a DTP to upload master data from a flat file?
    Thanks so much for your attention and best regards,
    Karim

    Hi Karim,
    I suspect that you might be entering values that are not in correct format as defined in BI DTP. Eg: date it could be DD.MM.YYYY in BI you might be giving MM.DD.YYYY similary you may be entering the wrong format for master data you are giving it in selections.
    Hope it helps...
    Best Regards,
    Madhu

  • Units field MEINS for field TOTQTY of DataSource  ... is hidden

    hI,
    I am getting "Units field MEINS for field TOTQTY of DataSource ZDS_BEALO is hidden
        Message no. R8147 "
    error message while creating the generic extration using fuction module...
    Please help to slove this

    I solved this problem myself by writing ABAP program.
    REPORT  ZTEST.
    TABLES ROOSFIELD.
    DATA: ITAB LIKE ROOSFIELD OCCURS 0 WITH HEADER LINE.
    SELECT * FROM ROOSFIELD INTO TABLE ITAB
                           WHERE OLTPSOURCE = 'DATASOURCE_NAME'
                                 AND FIELD = 'WAERS'.
    *update ROOSFIELD set SELECTION = 'X'.
    *ENDSELECT.
    Create a report program and update the value of field "SELECTION" as above.
    Then try to make changes in RSO2 as it needed.
    Let me know if you need my help..
    Thanks,
    Hanuma

  • Units field WAERS for field NAVALUE  is hidden for DataSource ..

    Hi,
    I am trying to change the DataSource but getting the error "Units field WAERS for field NAVALUE  is hidden for DataSource ..".
    It is not allowing me to get the field list to change after that.
    Can anyone throw somelight on this issue please..
    Thanks,
    Hans

    I solved this problem myself by writing ABAP program.
    REPORT  ZTEST.
    TABLES ROOSFIELD.
    DATA: ITAB LIKE ROOSFIELD OCCURS 0 WITH HEADER LINE.
    SELECT * FROM ROOSFIELD INTO TABLE ITAB
                           WHERE OLTPSOURCE = 'DATASOURCE_NAME'
                                 AND FIELD = 'WAERS'.
    *update ROOSFIELD set SELECTION = 'X'.
    *ENDSELECT.
    Create a report program and update the value of field "SELECTION" as above.
    Then try to make changes in RSO2 as it needed.
    Let me know if you need my help..
    Thanks,
    Hanuma

  • Units field XYZ for field ABC of DataSource ZRST Message no. R8147

    HI,
    When I'm trying to SAVE my datasource ZRST, I've got following error.
    Units field XYZ for field ABC of DataSource ZRST Message no. R8147
    In extraction structure of this datasource thare are at least two fields that use the same unit field.
    Accordign SAP note no 867795:
    One of the fields is displayed and another is hidden.
    Then the unit field is hidden and the above error occurs.
    This note is valid for component SAP_ABA release 700. I'm running my R/3 source system on SAP_ABA     620.
    Could it be the same case as described in this SAP  note?
    Anybody got same problem? Please advise.
    Thanks
    m./

    Hi,
        Please check the dependencies on the fields, as some fields should have the units defined ,check the fields and activate the datasource.
    hope this helps,
    thanks,
    vrrp.

  • IE07 and error 'Maintain field selection for Fleet data in Equipment List'

    Hi all,
    When running transaction IE07 (multi-level equipment list) , I get the following error:  'Maintain field selection for Fleet data in Equipment List (Multilevel)'
    I can't see where is the missing configuration point.
    We have activated business function LOG_EAM_CI_3.
    Have anyone encountered this error before?
    Thanks,
    P.

    Hi Narasimhan
    Could you give more details ? where is located this setting?
    Thanks,
    P.

  • Using parameter fields gives an error in InfoView asking for prompting1.htm

    Hi,
    We have a number of Crystal Reports available to staff online via InfoView. The majority of these reports work fine. However, where the report uses a parameter field and allows the user to select certain criteria an error box appears looking for a html page called prompting1. It is looking for the html page in the CrystalReportViewer folder within the Temp folder. Having looked in the folder there is no such html page. I have created a blank prompting1.html but then the when the report is refreshed, it prompts for prompting2.html. When run using the client software the report runs as it should with no error message.Has anyone else come accross a similar problem?
    Thanks in advance
    Aled

    Moved to BOE Admin forum

  • Reason for Error "Unknown field type (28) encountered."

    Hello,
    I'm from Germany, so sorry for my English first.
    I got the error "Unknown field type (28) encountered." when I run
    a simple "SELECT * FROM system.functions" on my ADD-Database.
    The solution for this problem is found in the KBA 2145730.
    If I use the ADS DLLs v. 11.10.0.22 I got the error, but if I use the
    ADS DLLs v. 9.10.0.35 everything is fine.
    For solving other problems I think it would be better to use the newest
    version, but in this case I can't. At this time it is not a problem, because
    I can't find any real reason so that I must update for now, but nevertheless
    I'd like to know, why this error occurs. What is type 28? Or (what real
    would be great) can I make changes to my software, so that I can
    avoid this problem? I hope you can help me with this "riddle" and wish
    all of you a great day.
    Greetings from Germany,
    Gerit Freericks

    For backwards compatibility the server will send different field types (i.e. char vs varchar, ansi vs unicode, etc).
    The server determines this based on the ACE (Advantage Client Version).  By swapping in new DLLs you are telling the server that you are running a newer client and it can send the newer field types etc for the system tables.
    In addition to swapping the DLLs re-build the application with the new TDataSet (re-compile) and this should resolve your issue.
    For the field types look at ACE.pas  (or ACE.h) in the TDataSet (on the latest).  It looks like 28 is an NMEMO (Unicode Memo field)

  • Error getting fields for PSA /BIC/B0002603

    Hi Experts,
    Can any one tell me please why am I getting these errors while i'm try to activate the DataSource
    Error getting fields for PSA /BIC/B0002603
    Error Saving Datasource ZDSXXX
    Thanks

    Hi Ahmed,
    please run this program in SE38: " RSDS_DATASOURCE_ACTIVATE_ALL "
    give data source name and flat file source system name.
    hope this will solve the problem.
    Best Regards.
    Edited by: Daya Sagar on Sep 1, 2009 1:33 PM

  • Error getting fields for PSA

    When trying to activate the datasource i am getting the following error 'Error getting fields for PSA'. anyone having any idea about how to resolve this issue

    Hi,
    Try activating the datasource using the program in SE38: RSDS_DATASOURCE_ACTIVATE_ALL
    give the data source name and source system name.
    Check the following threads:
    Error getting fields for PSA /BIC/B0002603
    Error occured during replicate the metadata of datasource
    thanks,
    Arminder

  • How to handle currency & unit fields in call transaction?

    Hi,
    Can any one tell me How to handle currency & unit fields in call transaction? & how to dael with error for this fields? whith some sort of coding.
    Thanks In Advance.
    Pravin

    Hi Pravin,
    The same topic has been discussed in the following thread:
    How to handle currency & unit fields in BDC recording method?
    Regards,
    Chandra Sekhar

  • Missing Currency Field/ Unit  Field.

    Hi Experts,
    I'm trying to load Master data in to an InfoObject, And the master data contains 5 char and 3 keyfigures.
    I have created 2 KFs as Amount and have mentioned data type as currency field and Fixed currency as INR
    and the other KF as Quantity and Fixed Unit of Measure as EA.
    And my Flat file contains column 8.Quantity, 9.UnitOfMeasure, 10.UnitPrice, 11.TotalValue.
    While I try to activated the Datasource I'm getting an Error as (Position 8) Missing Currency Field/ Unit  Field.
    Can anyone tell me what has gone wrong with it please.
    Thanks

    Check have you assigned the fileds from your flat file for Unit and Current to the Data Types in UNIT and CUKY.
    Cheers,
    Neel.

  • How to Map the Unit field  in case of DSO and INFOCUBE

    Dear Experts,
    I have a issue ,Please help me to solve this
    I have DSO as provider ,
    And, i have to map transformations  btw the Datasource and DSO.
    In generic Data source,  i have unit fields like BASME,MEINS (Quantity units) & STWAE (currency field)
    and normal Quantity fields  like KWMNG,OAUME(quantity related),OAUWE (value related).
    In DSO data fields as Key figure info objects like  0Quantity (which have 0Unit as unit of measure) and some other  key figures which have there respective unit of measure in info object  definition.
    So you Please tell me how to map the Quantity ,Amounts, unit fields to key figures that we have.
    (How it will be for both DSO and Info cube is there any difference?)
    Edited by: AnjunathNaidu on Jan 18, 2012 1:20 PM

    Navasamol ,
    If it is works ,will u please tell me what is the difference ,if the transformations btw data source and DSO and
    what is the difference btw data source and info cube and btw DSO to Infocube or cube to cube .
    And i have  seen the Quantity fields  and there respective unit fields are mapped directly  to key figure info object
    in case of Info cube . Its working fine .
    If only 1:1 mapping allowed in DSO data fields key figures and there respective unit of measure characteristic.
    why this difference btw DSO and Info cube can any one explain me in detail.
    Expecting your valuable suggestions.
    Thanks & Regards,
    Anjunath Naidu
    Edited by: AnjunathNaidu on Jan 18, 2012 4:05 PM

  • While Doing F-28 error-Balancing field "Profit Center" in line 002 not fill

    Hello Sir,
    I am doing F-28 Customer Incoming Payment , i have clear three invoice against payment.
    So when i post that entry system gives me error Balancing field "Profit Center" in line 002 not filled".
    so that entry could not found profit center. (Document Splitting Activate)
    So can i assign Customer reconciliation account in T code - FAGL3KEH and assign Common Profit Center there.
    Plz guide me , if i will assign there recon account ?.
    reply soon
    Thanks
    J

    Hi James,
    According to me, you have two options, either enter the PC at the time of document entry or Go to doc.splitting & uncheck the PC mandatory field under doc. splitting characteristics for GL accounting.
    Your problem will get resolve by doing this.
    Thanks & Regards
    Anuj Agarwal

  • MIRO Error - Balancing field "Profit Center" in line item 001 not filled

    Dear Experts,
    Recently we upgraded to ECC 6.0 from 4.6C. We implemented new GL functionality.
    We have also introduced new Profit Centers and have updated the same in Material Master.
    Now, the new Profit Centers are valid from 01.04.2009 till 31.12.9999.
    Now my problem is while doing MIRO after 31.03.2009 for old PO's i.e. the PO's which were created before 01.04.2009 the system gives me error "Balancing field "Profit Center" in line item 001 not filled".
    This is because for the particular line item it picks the profit center from material master, but the validity of that (NEW) profit center is from 01.04.2009 whereas I want to do the posting in back date i.e. for eg. 28.03.2009. Due to which it does not get any profit center.
    How do I resolve this problem. Is there any exit or BADI to do the same.
    Regards...

    Hi
    There could be multiple reasons for this. Pls check on:
    1. For the Expense Account assigned in DIF, have u made the assignment for deriving Profit Center & Business Area in T Code OKB9
    2. Ask your FI Consultant to check the Splitting Characteristics for the MIGO. Check the Splitting Characteristics assigned to the Accounting Document Type assigned to T Code MIGO. Also check if all the GL Accounts have been assigned a splitting characteritics. The path is:
    IMG> Financial Accounting(New)>General Ledger Accounting (New)>Business Transactions>Document Splitting
    3. Do you maintain profit center as a default in material Master? If yes, check if the same has been assigned in the view extended for the plant concerned?
    Pls check the settings. If any doubt, revert back.
    Thanks & Best Regards,
    rahul.

Maybe you are looking for