Error update 8.3

ipad mini 2 can not update 8.3. it errors -1.

I can't update OTA in my ipad. Because it does not reboot. It only appears the Apple logo on the screen. Thanks for your help.

Similar Messages

ERROR: Update mode C is not supported by the extraction API - R3 11

Hi gurus,
I just tryed to implement the solution I found at this link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
The data source is based on an Infoset on the KONV R/3 Table.
I setted the AIM delta process and I did all the activities as written in the document.
The process works if I load data to bw in "full", with "Init without data transfer" and "delta" mode. Of course if I change a Purchase document, it will be posted in the delta queue and then loaded to bw with the next delta load.
The "initialize delta process" (with data) doesen't work and returns the following error:
Update mode C is not supported by the extraction API
the error code is R3 11.
have you any idea about it???
Thanks!!!
Regards!
Matteo

Hi,
for me it sounds quite simple. It is that the update mode 'C' get flagged as 'not allowed' for this extractor. Did you check with rsa3? I guess you will get the same error message. May be you can start debugging in rsa3 to find the place where the update mode gets checked.
Anyway, it shouldn't be a issue as you have a workaround. May be you should raise a error message at sap because of this.
regards
Siggi

Error publishing from Muse - "error updating device redirect setting"

After recent upgrade of Muse I am getting an error message when publishing. The pages are published correctly but there is an error which prevents the final completion of the process. message = "Error updating device redirect settings click resume to try again." it never works. What is up? is this a Business Catalyst error or a a Muse error?

I turned off the firewall, logged out from Creative Cloud and restarted my computer. After rebooting, I logged in to Creative Cloud, open Muse and connect to Business Catalyst without no problem,

When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this

When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this problem previous and was able to fix by doing a complete wipe of my computer and reinstalling CC. However, I should not have to wipe my computer clean everytime I need to do a CC update. HELP!

Hi,
Please download the updates directly from the link below:
WIN: All Adobe CC 2014 Updates: The Direct Download Links for Windows | ProDesignTools
MAC: All Adobe CC 2014 Updates: The Direct Download Links for Mac OS | ProDesignTools
Regards,
Sheena

Error 'Update Was Terminated' - While clearing an open item

Hi,
We are facing a problem where we receive an error - "Update Was Terminated" when we try to clear some entries for 3-4 vendors (posted in period 12 of year 2006. it happens only for those 3-4 vendors). We have identified the problem as follows:
1) We ran program SAPF190 and found that there is a defference in the 'debit balance' and Total of line items' for these vendors. I ran program SAPF71 (in Quality server) which rectified some entries. However, some entries still remain incorrect and these entries that still remain incorrect are ones - "which have a posting date of 10 oct 2006, but the posting period picked up by the document header is period 12, instead of period 7". Now, some other documents posted for the same vendor on the same date have picked up the correct posting period i.e. 7. I am really baffled at how this actually happened and howcome the system allowed it??
2) After running program SAPF190, there were some entries that got corrected (these entries were just not captured by the system in the balance field, and did not have the same problem as the entries mentioned above where the wrong posting period was picked by the system). When i tried to clear the line items for the vendors whose entries had been rectified, it still gve the update error. When i checked the number range status, i noticed something very odd:
"The number range status shows a number much higher than what the system is automatically picking for the documents (e.g system picks 230 as the document number when posting, but the number range staus in FBN1 shows current number as 256). Also, once 256 is reached (i posted 26 documents for it) and we post the 257th document, the error remains and the status number now moves up 100 places to 356). At this time if i post another document it picks the number 258 instead of 356...and if i keep posting documents till 356 is reached, im sure when i post the 357th document, the status will jump to 456)
Can someone please help me here!! I dont understand how and why this is happening!!
Thanks!!
Regards,
Angad

>
Ravi Sankar Venna wrote:
> Hello,
>
> Please let me know the ERROR name you are getting and what is the transaction code you are using to clear. (F.13 or F-44)
>
> Try to analyze the dump in ST22.
>
> Regards,
>
> Ravi
Hi,
The error is "Update was terminated" . It sends this message to my inbox!! After searching a bit i found about the two reports - SAPF190 and SAPF071. After running them i found some balance mis-match. I ran the two programs and it rectified those mis-matched entries!! However, even after that, it is giving me the same "update was terminated" error. We are using F-44 for clearing.
This error is coming only for those entries which we had posted using a user-exit. Basiaclly these are entries for late payment which were programmed to be posted directly at the time of invoicing. I just checked the code of the exit, and these entries were (astonishingly) made directly into the BKPF and BSEG tables (infact the posting period was hard-coded to '12', which is why even when my posting date for these documents is 10.10.2006, it still enters posting period '12' in the header instead of '7'.). Therefore, there were balance mis-match when we saw the monthly balance in FK10N and compared it with the line items total for that month. However, on running report SAPF071, it corrected those entries, but the update error problem still persists!!
The exact error:
Update was terminated
System ID....   QAS
Client.......   100
User.....   MOHGYA323233
Transaction..   FB1K
Update key...   4A206A2D00E5001202000000C0A80A35
Generated....   04.06.2009, 11:24:59
Completed....   04.06.2009, 11:24:59
Error info...   F1 805: Clearing: Line item 001

Error updating adobe download assistant from version 1.0.6 to 1.2.9

i am getting an error updated adobe download assistant from version 1.0.6 to 1.2.9. "The application cannot be installed due to a certificate problem. The certificate does not match the installed application certificate, does not support application upgrades, or is invalid. Please contact the application author.

Sammybobammy89 what Adobe software title are you trying to install? To resolve your current error remove version 1.0.6 prior to installing version 1.2.9.

Error Updating table condition table 372 in J1IIN

Hello all,
I am facing the problem while working in ECC 6.0 environment in the transaction code J1IIN.
I have maintained the condition type JEXP ( A/R BED %) as 14% with the Key combination Country/Plant/Control Code (Table 357). While iam saving the Excise invoice the system is throwing the error like error updating the table condition table 372
I have gone through the post given by Ms. Jyoti few days back and tried to do some changes in the customisation.
I tried to maintain a different access sequence for the condition type JEXP i.e a new Access sequence(ZJEX) and also a new condition tpe (ZJEP). We don't have other Excise condition type in our Pricing procedure.
In the access sequence except condition table 372, I have maintained all other condition tables.
Still the error is persisiting. Can anyone put some light on the issue.
I have even traced the values being hit in the tables directly. There is no relation of table 372, then why is it being cause of the error.
Also while debugging it gives a message "An exception (CX_BADI_INITIAL_REFERENCE) occured".
Does this help in anyways.
Gurus plz give u r suggestions.
Thanks in advance,
Regards,
Karthik.

Hello Srinivas/Sandeep
Please ensure that access sequence in the condition type JEXC has got the table 372. If it is not there please maintain it.
The standard access sequence used in all duty condition type
is JEXC which has got the table 372 this will get updated once
you save your excise invoice.
If the issue is resolved, kinldy close the message.
Regards
MBS

Error updating the table condition table 372 in J1IIN

Hello all,
I am facing the problem in the transaction code J1IIN (In CIN).
I have maintained the condition type JEXP ( A/R BED %) as 16% with the Key combination Country/Plant/Control Code (Table 357). While iam saving the Excise invoice the system is throwing the error like Error updating the table condition table 372
I have gone through the post given by Ms. Jyoti few days back and tried to do some changes in the customisation.
I tried to maintain a different access sequence for the condition type JEXP i.e In the access sequence except condition table 372, I have maintained all other condition tables.
Still the error is persisiting. Can anyone put some light on the issue.
I have even traced the values being hit in the tables directly. There is no relation of table 372, then why is it being cause of the error.
Gurus plz give ur suggestions.
Thanks
Srinivas

Hello Srinivas/Sandeep
Please ensure that access sequence in the condition type JEXC has got the table 372. If it is not there please maintain it.
The standard access sequence used in all duty condition type
is JEXC which has got the table 372 this will get updated once
you save your excise invoice.
If the issue is resolved, kinldy close the message.
Regards
MBS

Error updating the table 372

Hi Gurus,
I maintained the JCEP ( A/R Cess %) as 3%. While iam saving the Excise invoice the system is throwing the error like error updating the table condition table 372
Gurus plz give u r suggestions.
regards,
jyothi.
Edited by: jyothi. on Feb 25, 2008 7:26 AM

Hi Murali!
Even I am facing the same problem while working in ECC 6.0 environment. I am continuing in the same post as I feel it is most relevant post to continue the issue instead of opening a new issue.
I tried to maintain a different access sequence for the condition type JEXP i.e a new Access sequence(ZJEX) and also a new condition tpe (ZJEP). We don't have other Excise condition type in our Pricing procedure.
In the access sequence except condition table 372, I have maintained all other condition tables.
We have maintained the values against table 357- Country/Plant/Control Code.
Still the error is persisiting. Can you put some light on the issue.
I have even traced the values being hit in the tables directly. There is no relation of table 372, then why is it being cause of the error.
Thanks in advance,
Regards,
Karthik.

Error updating .mac message...FIx doesn't work???

I get the "there was an error updating .mac" error message when trying to publish my website. I've tried the File > Publish all to .mac route and I still get the same error message. Any ideas what I do now? Any other suggestions or alternatives?

I get the "there was an error updating .mac" error message when trying to publish my website. I've tried the File > Publish all to .mac route and I still get the same error message. Any ideas what I do now? Any other suggestions or alternatives?

My iphone 4 after ios 5.1 update. had error updating.my phones now in recovery mode now.usb to itunes.keeps saying!itunes doesn't recognise phone ,after update done now error.i recall doing a firmware update for the old 5.0 update.happened again.i recall

my iphone 4 after ios 5.1 update. had error updating.my phones now in recovery mode. usb to itunes when switched on.doesnt recognise. after update done.yes updates itunes.trued different usb ports. etc . for restore .but nothing.says my phones backed up in preferences.on itunes.but can get back up.i recall doing a firware update for the last os 5.0 update..but forgot where the link was .do i have to buy a new phone ?

UPDATE: I attempted to bypass activation using the emergency call 112 to get into the homescreen, but the call failed, in fact, even 911 will not go through and give me a call failed. (before you yell at me for dialing 911, I'm a firemedic )

Error - Update Product Data in Solution Manager

Hello,
We are currently downloading the Enhancement Package 4 in SOLMAN via Maintenance Optimizer, however, after choosing the Technical Usages in step 2.1, it shows an error in step 2.2 (Select OS/DB Dependent Files):
Error : Update Product Data in Solution Manager
Has anyone encountered the same problem? Would it be fine to continue on the next step after selecting the files which you need for your operating system-database combination.
Any information is highly appreciated. Thank you.

Hi Jaypee,
Check guide How-To Install EHP4- A practical guide. Solution of this problem is documented there. you can download it from http://service.sap.com/erp-ehp
Extract from this guide for this problem:
Make sure that you update the product data in SAP Solution Manager. This is described in SAP Note 1277035 which is referenced from the collective SAP Note 1122966. If you do not update the product data, you might get an error message after the stack calculation. The message text explains the problem in more detail.
Thanks
Sunny

Error Update was terminated at time of VFO1

Dear All,
I have created sales order with ref to contract no through standard BAPI ,now i am going to create bill with ref to sales order (which i have created through BAPI),while saving the bill it will give me error Update was terminated and in SBWP .i have received mail that contains:
Transaction..   VF01
Update key...   4A98C715DA854584E10000000A08351C
Generated....   29.08.2009, 16:34:28
Completed....   29.08.2009, 16:34:29
Error Info...   M2 815: Error while determ. loc. crcy: exchange rate type M
After that i have created as sales order without use of BAPI with same contract number ,and after that i have created bill with ref to sales order at that while saving it give me no error
so pls help me out on this,

Can you contact you functional team showing the below message
Error Info... M2 815: Error while determ. loc. crcy: exchange rate type M
Check ifthe below note give you some help.
Note 1362966 - BAPI: FAGL_PLANNING - incorrect exchange rate type is used
Thanks
Rishi Abrol

Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY- ERROR EVENT_RAISED - Error updating the process object

Hi All
I have set up a simple custom HCM process and Form regarding Infotype TO CREATE AND CHANGE POSITION. I have checked the process and form consistency and it seems fine. Now when I run the process from HRASR_DT it generates a process number but it also gives an error workflow could not start.I get following error (SWIA log - Step history)
Executing flow work item - Transaction brackets of the workflow has been damaged
Exception occurred - Error when starting work item 000000007031
PROCESS_NODE - Error when processing node '0000000014' (ParForEach index 000000)
CREATE - Error when creating a component of type 'Step'
CREATE_WIM_HANDLE - Error when creating a work item
CREATE_VIA_WFM - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event CREATED and (target) status
EVENT_RAISED - Error updating the process object
Executing flow work item - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY->ERROR
EVENT_RAISED - Error updating the process object
Executing flow work item - Transaction brackets of the workflow has been damaged
Executing flow work item - Work item 000000007031: Object FLOWITEM method EXECUTE cannot be executed
Executing flow work item - Error when processing node '0000000014' (ParForEach index 000000)
Points to be noted:
1) I have searched few SAP notes such as 1384961(Notes for 6.0.4) but our system is in higher level patch 6.0.5
2) WF-BATCH have SAP_NEW and SAP_ALL authorization.
Appreciate your valuable suggestions.
Thanks
Ragav

Hi Ragav
did you try to debug this? maybe something is missing in config of P&F?
Since you are on 605, the following note would be there in your system....use it to debug:
1422496 - Debugging background workflow tasks in HCM P&F
This will help you find the root cause.
regards,
modak

Error updating CC Apps. "Update failed". Errors U44M1P7. Solution

I have an errors updating my CC apps, such as Photoshop, Illustrator. Errors U44M1P7.
Found a recommendation from Adobe here http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
It's not helped to solve the problem.
I've tried uninstalling all of my CC products, then clean all of them with Adobe CC Cleaning Tool. But nothing helped me. I've looked into Install Log files and I've found that CSXS filed have an errors. Here is an example:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 11 error(s)
Win OS version: 6.1.1.0 64 bit Type: 1
----------- Payload: Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4-mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE} -----------
ERROR: DF045: File corruption detected. Re-install the product & then apply the patch again. (Can not repair file "C:\Program Files (x86)\Common Files\Adobe\CEPServiceManager4\CEPServiceManager.exe")(Seq 14)
ERROR: Failed to apply patch to file at "C:\Program Files (x86)\Common Files\Adobe\CEPServiceManager4\VulcanControl.dll", Patcher tool returned error: 32769(Seq 12)
ERROR: DW063: Error rolling back command ARKPatchCommand(Seq 12)
ERROR: Failed to apply patch to file at "C:\Program Files (x86)\Common Files\Adobe\CEPServiceManager4\adobe_caps.dll", Patcher tool returned error: 32769(Seq 10)
ERROR: DW063: Error rolling back command ARKPatchCommand(Seq 10)
ERROR: Failed to apply patch to file at "C:\Program Files (x86)\Common Files\Adobe\CEPServiceManager4\ssleay32.dll", Patcher tool returned error: 32769(Seq 8)
ERROR: DW063: Error rolling back command ARKPatchCommand(Seq 8)
ERROR: Failed to apply patch to file at "C:\Program Files (x86)\Common Files\Adobe\CEPServiceManager4\lib\ServiceManager-Launcher.dll", Patcher tool returned error: 32769(Seq 6)
ERROR: DW063: Error rolling back command ARKPatchCommand(Seq 6)
ERROR: Failed to apply patch to file at "C:\Program Files (x86)\Common Files\Adobe\CEPServiceManager4\zlib1.dll", Patcher tool returned error: 32769(Seq 4)
ERROR: DW063: Error rolling back command ARKPatchCommand(Seq 4)
Please search the above error string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
Exit Code: 7 - Unable to complete Silent workflow.
Please see specific errors for troubleshooting. For example, ERROR: DF045, DW063 ...
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
I've found a solution of this problem.
1. Launch any of CC App (Photoshop, Illustrator, etc)
2. Go to the HELP -> UPDATES
3. It will start Adobe Aplication Manager, then UNCHECK ALL of Adobe CSXS Infrastucture 4 files (910 KB) under all of your updating Aplications.
4. Click "UPDATE" button.
That's all. All of my APPS updated to the latest versions.

Hi Jeff, I'm using OS X Mavericks 10.9.1
In the first attachement you can see the Creative Cloud screen that always stays blank.
In the second attachement you can see an error screen (more a pop up) that show an errro after I tried to login with my Adobe ID. I have to do that when I start up any of the Adobe apps (Photoshop, Premier, Acrobat etc).
Thanks in advance!
Regards,
iToony

Error"Update was terminated' while doing picking and data was not saved

hi experts,
I have created a sales order. for that i created a deliery.then i created shipment .and i have put pick qty and batch.
it gives a message Express document " Updated was terminated "received from author XXXX.
and picking is not saved and i'm not able to do PGI.
Please help me.....
Thanks in advance,
ria

Hai,
Analyse this error in ST22 - ABAP runtime error or in SM13 - update request.The system will show the error update records in red color. Click the error & see the problem in funciton module.THis may be because of no ranges problem or any changes in print out program. Also if u have any BADI activation for the sale order & any changes in this program also leads to this error.

Error update 8.3

Similar Messages

Maybe you are looking for