SRM shopping cart screen flickers

Shopping cart screen for SRM flickers and does not load up. No short dump in backend system and no errors in portal log.
This issue get's resolved after restarting the SRM backend system. Same issue and resolution used for eRecruit however not able to determine exact cause of the error.
Does anyone has idea as why this is happening?

Hi Tanmay,
I faced a similar issue while integrating WDA application in Portal.
Check out the following SAP note that corrects this issue:
1230506 - Endless loop when starting Web Dynpro ABAP
Hope this solves your problem!
Thanks.
Chitrali

Similar Messages

Activating F4 help/Validating for a field added to SRM shopping cart screen

I have added Profit Center as an additional field on the Shopping Cart Screen. This should be displayed only when the user selects Cost Center as value for another input field. Also I need F4 help for this profit center.
Can someone please guide me with the steps to do the same.
Thanks and Regards,
Vanessa

Hi Vanessa,
Validation can be done in doc change and doc check BADIs.
For attaching F4 help you can create a search help in ABAP Dictionary and attach that serach help to your cutom field .
Hope that helps,
Anubhav

Shopping cart screen in SRM Add-on UI is not working

Hi,
Recently we had upgraded SRM Add-on UI package, when we tried to open the shopping cart screen from BSP page (i.e. link: https://sapsrxa1.flextronics.com:8012/sap/bc/bsp/srmnxp/shoppingcart/defaults.htm ), the page is throwing BSP exception as 'The object default.htm in the URL / sap / bc / bsp / srmnxp / shoppingcart / default.htm? Sap-client = 100 & sap-sessioncmd = open is not valid.' Could you please help me to fix this issue.
Thanks - Dileep

hi yateesh,
please follow the below steps:
Step 1: Manage System Alias
Post Gateway installation, the SRM server (upon which GW is installed) needs to have system alias.
Path : SPROà SAP Implementation Guide à SAP Web Application Server à Gateway à OData Channel à Configuration à Connection Settings àSAP Netweaver Gateway to SAP System à Manage SAP System Alias
1. Create a new entry, maintain SAP SYSTEM ALIAS as LOCAL or use the SID of the SRM server as the alias name
2. Check Local GW checkbox
3. Maintain RFC Destination as NONE
4. Maintain Software Version as DEFAULT
Step 2: Maintain Gateway Services
In this step, Gateway services delivered by SRM UI Add-on are activated.
Path : SPROà SAP Implementation Guide à SAP Web Application Server à Gateway à OData Channel à Administration à General Settings à Activate and maintain Services
1. Click “Add Service” for activating gateway services
2. On the filter, set System Alias (with the name provided in the last step e.g. LOCAL) and search.
3. Pick every Service with namespace “/SRMNXP/” and click the service hyperlink.
4. In the Activation Popup, maintain the proposed technical service name and technical model name and press ok.
5. Once all services are activated they appear on the main page.
Thanks - Dileep

Display error message from SLG1 on shopping cart screen

I have implemented a 'BBP_CATALOG_TRANSFER' badi. I am adding all the custom error messages in ET_SC_MESSAGES export parameter of this badi. As a result of this, all the custom error messages added in the above parameter, gets logged in the application log SLG1 automatically and I can see those custom messages in SLG1. Now how to display this message from SLG1 on the shopping cart screen on the top where you normally see standard error messages in red.
Can anyone please help me on this?
Thanks,
Krupa

Hi
Which SRM version are you using ?
I have not tried this... but I think this is not possible to display error messages
using BBP_CATALOG_TRANSFER BADI.
Try to code your logic in using BBP_DOC_CHECK_BADI for filter type - BUS2121 (shopping cart). You need to add your custom message in ET_MESSAGES [] table.
For sample coding, refer to the link below ->
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/srm/bbp_doc_check_badi-CheckPurchasingDocument&
Hope this will definitely help.
Do let me know.
Regards
- Atul

Activating Order as Direct material button on Shopping cart screen

Hello SRM experts,
we are in SRM 5.0. we implemented BADI: BBP_DP_PROD_CHK_BADI to suppress Order as direct material button on Shopping cart screen.in this BADI under PRODUCT_CHECK method we have this code CLEAR ev_dp_possible.Now the requirement is to bring back that order as direct material on to shopping cart screen and we need to check there for direct material and non direct material.
i commented the code in METHOD PRODUCT_CHECK . but still i'm unable to see that button on SC screen.After bringing that button on to screen we need to check for Direct and non direct materials, if it is a non-direct material and trying to press button Order as Direct Material it should hav to give some error.
please help me.
thanks in Advance....

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Adding a new text field in Shopping Cart screen

Hi,
I am new to SRM and I am working on SRM 5.0
My requirement is to add a text field for buyer's note with unlimited length similar to Approver's note in Shopping Cart screen.
I have seen in the forum that many have done this earlier and i need step by step procedure to complete this task.
I am able to create text field in Text Schema, but this field is not reflecting in shopping cart screen. Do i need to do any thing extra apart from maintaining in Text schema?
Can you please send the detailed procedure to do this task?
Thanks in advance.
Regards,
Vamsee

Hi Saritha,
Thank you for your help. In fact, i have gone through this link and followed the steps there. But, the Text ID is not reflecting in my shopping cart.
We are using SRM 5.0. The requirement is to add a new text field with unlimited length similar to the existing Approveru2019s note field in Shopping Cart screen at header level.
I have followed the steps mentioned below.
1.Go to SRM IMGSRM Server->Cross-Application Basic Settings->Text Schema
2.Execute Define Text Types and then select the entry BBP_PD Text Object and click on Text Type.
Here, create new entry for ID as ZHTXT and Description and save it.
3.Execute Define Text Schema and then select the existing Text Schema SC ( Shopping Cart) and click on Texts for Schema.
Here, assign the newly created Text ID with details Header/Item etc.
4.I am not executing the last step Define Fixed Values for Texts, as the Text Schema SC is already assigned Transaction Type Transaction Type SHC.
Please suggest do I need to perform any extra steps apart from Text Schema to reflect the Text ID which I created in my Shopping cart screen? Or do we need to code anything on ITS side?
Thanks in advance.
Regards,
Vamsee

Details in "ACCOUNT ASSIGNMENT" tab in Shopping cart screen

Hi all,
We are on SRM 7.0.1.
For each requester,we have the EMPLOYEE role assigned.
In shopping cart screen,under account assignment,we want to see the acocunt assignment detailed view as the default view under tab "ACCOUNT ASSIGNMENT".Currently,under account assignment,user has to click on the DETAILS button and then the details show up in the bottom part of the screen.
Can anyone advise how do we change the default view for the "ACCOUNT ASSIGNMENT' tab?
Thanks.

Can someone answer my query?

Adding an asterix(*) in the standard field in the shopping cart screen.

Hi all,
In the Delivery address of the shopping cart screen, I need to add (*) in a field text, saying that it is mandatory field.
So, I need information that can help me change the standard field text, to add(*) in prefix. can you please help me find the information to add the same.
Regards,
Abhinay.

Hi Abhinay,
if you are in SRM 7.0 , then you can do it through the below configuration else you will have to modify the relevant HTML template.
SPRO->IMG->SAP Supplier relationship managemnet->SRM Server->Cross Application basic setings->extension and Field control(personalization)-> configure field control->configure control of field of substructure->Metadata for Fields of Substructures and Table-Like Enhancements
In your case if this is delivery address field , then choose Bus. object set type as 07 , Business object as BUS2121 , set level as Item , set subtype as 00000027.
you have to finnd the field name and select that and make the option as Field Visisble, Fiels enable 'Field required' tick.
As far as i know it will make a red asterick in the screen but you will have to write that check in DOC_CHECK_BADI to throw error message.
Thanks
Iftekhar Alam

SRM Shopping cart enhancement at line item level

Hi Gurus,
I am trying to enhance Shopping Cart screen.
Could you suggest me which data base table I need to add new field. We are using SRM 5.5. So If we enhance anything on backend, will it reflect in Portal side. Or do we need more development for portals?
Regards,
Ram

Hi Ram,
Your line item CUF fields created in SRM should be already in the input parameter IS_SC_DOCUMENT-ITEM[] (structure BBP_PDS_TRANSFER_ITEM).
Now for the ECC side, I believe you should map you SRM CUF fields to the BAPI's Customer Enhancement Structures (CES).
In the BAdI BBP_CREATE_BE_PO_NEW, the CES is in the output parameter CS_PO1_DOCUMENT-IT_EXTENSIONIN.
In the implementation code, you should provide the ECC BAPI Table Extension name, and map the SRM CUF fields in the CS_PO1_DOCUMENT-IT_EXTENSIONIN parameter.
For more information on BAPIs Customer Enhancement Concept, please refer to http://help.sap.com/saphelp_45b/helpdata/en/3e/0e1089c24611d1ad09080009b0fb56/frameset.htm
Regards,
José Omar

How to add custom field in delivery address/performance location tab in SRM shopping cart and Ship to address Pop-up in SRM PO?

Hi Experts
i have a reuirement where i have to add custom field in delivery address/performance location tab in SRM shopping cart and Ship to address Pop-up in SRM PO
i am doing below steps for this.
1. Adding custom field ZZfield in structure INCL_EEW_PD_PARTNER_CSF by using append structure.
2. Spro ->Supplier Relationship Management -> SRM Server -> Cross application basic settings -> Extensions and field controls (personalization) -> Configure field control ->Configure Control for Fields of Substructures
then click on "Metadata for Fields of Substructures and Table-Like Enhancements"
add the below entry
Bus. Object Set Type : I am trying 7 and 29
Structure Field Name : ZZfield
Bus. Object Type       : BUS2121/BUS2201
Set Level                    : Item
Field Visible : Check box should be checked
Field Enable : check box should be checked
Can anyone has the idea of this?
Thanks
Rohit

Hello Rohit,
Please create a enchancement for component /SAPSRM/WDC_UI_DO_SHIPTO.
Add new input field and label in view V_DODC_SHIPTO.
Bind the input field value with field ZZfield from structure /SAPSRM/WDC_UI_DO_SHIPTO in the context node SHIP_TO .
Regards,
Neelima

Validate GL Account at SRM shopping cart at account assignment level

Hi,
In the SRM shopping cart system, at Account Assignment Overview level, is there any BADI or user exit or enhancement options to validate the GL Account when the account is selected/key-in?
I try BADI for BBP_DETERMINE_ACCT, BBP_MESSAGES_BADI and BBP_ACC_CHECK_ICC. All is not trigger at Account Assignment level.
Please advice.

Hi,
I have a similar requirement apart from all the validations done by BBP_DOC_CHECK_BADI ,
we have to add one more validation (check the asset acquisition date if it is less than the current fiscal year give error message).
This has to done in R/3 .
I checked for the exits in the FM BBP4X_CODINGBLOCK_CHECK_47A and found that there are no exits for this FM.
PLEASE SUGGEST.Any help is appreciated.
Regards,
Rhea.

SRM shopping cart attachment to SAP not transferring

Hi SRM Experts,
I have an issue with document attachment which is not coming to SAP R/3 Backend.
Scenario 1
1.Create shopping Cart in SRM system with One attachment,
2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment is not exists only document number exists in the DMS (CV03N - No attachment)
Scenario 2
1.Create shopping Cart in SRM system with TWO attachments,
2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment only one attachment exists and other attachement document number only exists in the DMS (CV03N - No attachment)
Scenario 3
1.Create shopping Cart in SRM system with FOUR attachments,
2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment only THREE attachments exists and Fourth attachement document number only exists in the DMS (CV03N - No attachment)
From the above all its understood that last attachmen is not transfered to SAP . In Scenario 1 last attachement will Only one attachment.
Its Strange issue, can any one face this sort for issue before, kindly let me know what could be the casue,
Note - I have posted the same issue in DMS thread as well
Cheers...Gopinath

Hi Guru's,
I am using SRM 7.0 and while i create an attachment in shopping cart and try to send it in ECC, the attachment is not reflecting .
Since we are using the latest version of SRM, we have used BADI BBP_CREATE_BE_RQ_NEW
(Method IF_EX_BBP_CREATE_BE_RQ_NEW~FILL_RQ_INTERFACE.).
I have also gone through the below link and tried the implementation :
http://wiki.sdn.sap.com/wiki/display/SRM/BBP_CREATE_BE_RQ_NEW-CreateRequisitionin+backend
Also, all ECC configuration are in place. However things are not come in place. Only the details are reflected but the attachment is not reflected in ECC.
If anyone can guide the correct way in SRM BADI along with ECC configuration (just to verify) will be a great help.
Kind Regards,
Kunal.

SRM shopping cart attachment to SAP not transfering

Hi DMS Experts,
I have an issue with document attachment which is not coming to SAP R/3 Backend.
Scenario 1
1.Create shopping Cart in SRM system with One attachment,
2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment is not exists only document number exists in the DMS (CV03N - No attachment)
Scenario 2
1.Create shopping Cart in SRM system with TWO attachments,
2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment only one attachment exists and other attachement document number only exists in the DMS (CV03N - No attachment)
Scenario 3
1.Create shopping Cart in SRM system with FOUR attachments,
2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment only THREE attachments exists and Fourth attachement document number only exists in the DMS (CV03N - No attachment)
From the above all its understood that last attachmen is not transfered to SAP . In Scenario 1 last attachement will Only one attachment.
Its Strange issue, can any one face this sort for issue before, kindly let me know what could be the casue,
Cheers...Gopinath

Issue found with enhancement made by us in Class(SRM System). Same has been fixed. now its working, Thanks to all.
Cheers...Gopi
Edited by: Gopinath A.R on Mar 11, 2010 9:04 PM

Query on SRM Shopping Cart ,plz help its very very urgent

Hi Friends,
I have a query on workflow.
Users creates PO through SRM shopping cart and immedeately they receive a mail in there mail box.Below is the process flow of sending the mail to the user inbox from srm shopping cart.
SRM Shopping Cart>Business Object>Workflow-->Mail
Here my problem is.
The bususinees object generally holds the data for cart number and cart description, but when i am checking the workflow it does not contain any cart number or cart description,so that the mail that is going to user inbox also does not contain any cart number and cart description value.
Recenly our client upgrade from 4.6c to Ecc 6.0 and this problem is happening after the upgradation.
Please suggest if anyone face this kind of problem or anyone having any idea on this.
Pls give me some suggestion.
Thanks a lot
Mrutyun^

Hi,
Your condition is puzzling... the workflow in SRM for SC is triggered after the SC is saved.
The PO is a follow-on document after the SC is approved. As such it has no relationship to the backend upgrade since the workflow engine is in the SRM server. Your worflow is triggered from the SC or PO?
Regards.

Custom field in shopping cart screen

Hi,
Please let me know how to add a custom field at the item and header level in shopping cart screen.
Thanks,
Manu

Hi,
Add the fields into the below structures-
1- INCL_EEW_PD_ITEM_CSF_SC (For Item Level)
2- INCL_EEW_PD_HEADER_CSF_SC (For Header Level)
And then activate the BADI "BBP_CUF_BADI_2".
and manage the fields in this badi for display or hide.
Regards,
Sachin

SRM shopping cart screen flickers

Similar Messages

Maybe you are looking for