Error: URI is not hierarchical while invoking external WS
I have a business process, wherein I am invoking an external Java WebService using Invoke->PartnerLink
During compilation, i am getting error : URI is not hierarchical
If I remove the above call, there is no compilation error.
I have checked all the paths and project name for errornous whitespaces which lead to the above error. I am using 10g.
What could be the reason of the error?
Update
I just started with a fresh instance of JDeveloper (unzipped the JDeveloper pack at another location). And now the problem is gone.
So I think there was some problem with my JDeveloper compiler.
Similar Messages
-
Getting error "Http 404 not found" while accessing CUCM GUI..
Hi,
Please help um getting error "Http 404 not found" while accessing CUCM GUI. Yesterday it was running fine bt nw its showing dis error.
Please find attached screenshot for ur referance.
Thanks & R's
HarishHi Aaron,
I have restarted dat service bt still the issue is persisting.
Now its showing attached error.
Thanks and R's
Harish -
Unexpected element name: expected error while invoking external web service
Hi,
In JDeveloper when I invoke external web service call, I am getting following exception
"unexpected element name: expected=..."
But the same application works fine in .NET. Can someone help me as to why I am getting the exception only in JDeveloper and how to fix this exception.
Thanks.Hi,
Without more information, it will be hard to help, and tell you what could be teh issue.
Usually, this kind of error occurs when the payload and the WSDL schema are out of sync, for example if the order of the element on the wire do not match the order in a sequence declaration, you may get this error.
In such case, .NET handle the XML as if it was a 'all' -- no specific order -- and deserialize the message properly.
Hope this helps,
-eric -
Error ,Field catalog not found while doing billing with DP90
Dear Guru's
while doing billing with DP90 transaction code.i have given service order no xxxx and execute.Then i received the below error
Field catalog not found , Message no. 0K530.Kindly help me in solving the issue.
Thank u
S Babuhi naga suribabu,
I am also facing same issue. can you please help, where to check the configuration for this issue -
Error "Specifed Key not found" while installing Oracle 11g R2 db
Hi,
I am new to installing oracle 11gr2 DB. While installing at the stage of "install product" during the process of .Copy files its throwing the following error
*Specified Key not found
Please help me solving this problem. Your help is much appreciated.
Thanks in advance.979400 wrote:
Hi ..
I am getting the "Specified Key not found" while installing Oracle 11 g r2 on windows 8 (64 bit) and below is the installation log , Please help me .
Number one - you are hijacking someone else's thread. Please read the forum FAQ. The link to that is conveniently located in the upper right corner of this very page.
Number two - no oracle product is certified to run on Window 8. If you want to run an Oracle product, you need to use an OS which Oracle has certified for said product.
ID: oracle.install.driver.oui.OUISetupDriver:13
oracle.cluster.verification.PreReqNotSupportedException: Reference data is not available for verifying prerequisites on this operating system distribution
at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:248)
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4538)
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4487)
at oracle.cluster.verification.ClusterVerification.isPreReqSupported(ClusterVerification.java:6382)
at oracle.install.driver.oui.OUISetupDriver.verifyEnvironment(OUISetupDriver.java:299)
at oracle.install.driver.oui.OUISetupDriver.load(OUISetupDriver.java:422)
at oracle.install.ivw.db.driver.DBSetupDriver.load(DBSetupDriver.java:161)
at oracle.install.commons.base.driver.common.Installer.run(Installer.java:216)
at oracle.install.ivw.db.driver.DBInstaller.run(DBInstaller.java:129)
at oracle.install.commons.util.Application.startup(Application.java:869)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:117)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:148)
---# End Stacktrace #-----------------------------
---# Begin Stacktrace #---------------------------
ID: oracle.install.commons.util.exception.DefaultErrorAdvisor:16
oracle.cluster.verification.PreReqNotSupportedException: Reference data is not available for verifying prerequisites on this operating system distribution
at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:248)
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4538)
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4487)
at oracle.cluster.verification.ClusterVerification.isPreReqSupported(ClusterVerification.java:6382)
at oracle.install.driver.oui.OUISetupDriver.verifyEnvironment(OUISetupDriver.java:299)
at oracle.install.driver.oui.OUISetupDriver.load(OUISetupDriver.java:422)
at oracle.install.ivw.db.driver.DBSetupDriver.load(DBSetupDriver.java:161)
at oracle.install.commons.base.driver.common.Installer.run(Installer.java:216)
at oracle.install.ivw.db.driver.DBInstaller.run(DBInstaller.java:129)
at oracle.install.commons.util.Application.startup(Application.java:869)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:117)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:148)
---# End Stacktrace #----------------------------- -
Getting Error as Limits Not Defined while saving IT_0008
Hi Folks..
I am getting a message as "Limits not defined" while saving infotype basic pay our client payroll is international (it is a green colour message only) but i am unable to save the infotype entry. Request you to please advice me where to check to get resolve of this issue.
Thanks
sap_hrjust a shot in the dark... due to lack of information
i assume you use T710 for basic wage, there you should define the lower and upper limit for the payment. if these are not available for the entered payscale and level this message can occur -
Error while invoking external WS call from BPEL2.0
Hi,
I have a BPEL process from where I am making external WS call.
I have the WSDL file & the Endpoint URL for the external WS.
So,I have follow the below steps at BPEL editor.
1. Synchronous BPEL process[it includes 'receiveInput' & 'replyOutput'].
2. Added a "Partnet Link"[Created using external WSDL & Endpoint URL] at the Right hand side of BPEL Editor
3.Added "Invoke" node between 'receiveInput' & 'replyOutput' and then pointed to the newly created "PartnerLink"
While rebuilding the .jpr file I am getting the below error.
**C:\JDeveloper\mywork\CustomerDetails\CustomerDetails.bpel**
**Error(75): Element 'scope' not expected.**
Can Any one help me to resolve the issue ??
Note: I have been using JDev 11.1.1.6 and have gone through the below URL for similar kinda sample.
http://docs.oracle.com/cd/E23943_01/dev.1111/e10224/bp_sync.htm#CIHIEIHD
Cheers,
DebaHi Deba,
Just so I get my facts straight, when you look at the BPEL source code, what do you see? You should be seeing, first, a sequence, then, the receive activity, and then your invoke activity and finally reply. Isn't it?
As far as the error message suggests, looks like you have placed a "scope" - structured activity, at a place it does not belong.
HTH
Cheers
Swagat -
Error "Problem building schema" while invoking external webservice
Hi,
I have following problem:
I created 2 BPEL processes.
One of these processes should be called from the other as a partnerlink.
When I create the partnerlink, pointing to the deployed wsdl, I get following error "Problem building schema" when I try to access the input variable that was created by the invoke activity.
I have tried a lot of things but keep on getting this error.
When I create a new, empty BPEL process, and do exactly the same it does work!
any help would be greatly appreciated.....Hi,
I have given this URL 'http://ws.cdyne.com/WeatherWS/Weather.asmx?WSDL'.
Now it is showing the following error
Exception occured in library handler.Not implemented.
Exception of class CX_SIDL_INTERNAL_ERROR
Please have a look into it
Regards,
Dhana -
I have a WebService which is invoked , the request is routed through the mideator to the DBAdapter .DBAdapter interacts with the database and replies the result.
I send in the CreditCardNumber in the request and recieve its Status (VALID,INVALID). i get this error every time . i have tried almost every thing to fix this . Please help me with same .
Below is the complete error stacktrace.
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'getCreditValidationSelect' failed due to: DBReadInteractionSpec Execute Failed Exception. Query name: [getCreditValidationSelect], Descriptor name: [getCreditValidation.Creditcardinfo]. Caused by java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist . See root exception for the specific exception. This exception is considered retriable, likely due to a communication failure. To classify it as non-retriable instead add property nonRetriableErrorCodes with value "942" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
Thanks in advanceCan you please check the following
a. check the JNDI Configuration. ( check for the value used for XADatasourceName )
b. check the Data source created for the User.
c. Incase you have updated the existing JNDI then you need to update the adapter with the New Deployment Plan.
Thanks,
Sunil Gopal -
Dump error: Dynpro does not exist while in transaction me31L / me31k /ME41
Hi Experts
I am experiencing dump while attempting to create Schedule agreement/contract.
Error analysis
The system attempted to use dynpro 0201 in program "SAPLXM06".
This dynpro does not exist.
Trigger Location of Runtime Error
Program SAPLX06
Include MM06EO0C_CUSTSCR1_HEAD_SET_DAT
Row 10
Module type (MODULE PBO)
Module Name EXIT_SAPLEINM_013
Please suggest the correction
Reagrds,
Ankush ShindeHi,
This looks like some one is playing around with screen exits. Open the FM EXIT_SAPLEINM_013 in se37. Double click on include
ZXM06U35 and check the status of this include. I hope this is in Inactive status because of some syntax error.
If above is correct, then check and correct the syntax errors.
Also can you see what is the main program SAPLXM06 status. If not active, try to activate it in SE80.
Thanks,
Vinod. -
Dump error: Dynpro does not exist while in transaction me41 / me31k
Hi Experts
I am experiencing dump while attempting to create rfq/contract.
Error analysis
The system attempted to use dynpro 0301 in program "SAPLXM06".
This dynpro does not exist.
Trigger Location of Runtime Error
Program SAPMM06E
Include MM06EO0C_CUSTSCR1_HEAD_SET_DAT
Row 10
Module type (MODULE PBO)
Module Name CUSTSCR1_HEAD_SET_DATA
Please suggest the correction
warm regards
mariasHi, Dhananjaya Raj,,
I am facing same issue with same ABAP dump and error ? How you resolve it ?
please share your footprint. thanks in advance ... -
Dump error: Dynpro does not exist while in transaction me31K
HI,
I am getting dump while creating the Contract in ME31K.
hort text
Dynpro does not exist
hat happened?
Error in the ABAP Application Program
The current ABAP program "SAPLXM06" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
rror analysis
The system attempted to use dynpro 0201 in program "SAPLXM06".
This dynpro does not exist.
rigger Location of Runtime Error
Program SAPLXM06
Include MM06EO0C_CUSTSCR1_HEAD_SET_DAT
Row 10
Module type (FUNCTION)
Module Name EXIT_SAPLEINM_013Hello,
use transaction SMOD to check SAP enhancement MM06E005 in your system. Screen SAPLXM06 0201 is the contract header subscreen. The system report it missing because the enhancement MM06E005 (Customer fields in purchasing document) was activated in your system, but not implemented. So either disable/delete the enhancement or create a subscreen.
regards,
J.N.N. -
PPA not found while activating External Library DC
Hi,
I'm trying to activate an External library DC. The activation fail and here is the error I get :
Development Component
"<my_package>/itext202" in compartment "_GESTIONTEMPS_1" attached to request 1�530
[scID: 663, dcID: 954, parent dcID: 0, current state: OK, action: CREATED]
Build Number: (last successful: 1�235, last known 1�235)
Original Cause: PPA not found! Expected location:
<path to server 0>\temp\CBS\25\.B\1235\DCs\<mypackagename>\itext202\_comp\gen\default\public\AssemblyPP.ppa
REQUEST PROCESSING finished at 2008-03-18 16:34:31.443 GMT and took 33 s 861 ms
I looked at the folder during activation, this file is created but seems to be deleted too early.
Anyone faced the same problem before ?
JohannHi
Could you please update this message of how you managed to solve this
I have the same issue
Regards
Kay-Arne -
Error: File does not exist (while trying to get Petstore and demos to run)
Hi all,
I have been trying in vain to get the Petstore demo and other servlet demo HelloWorld to run. It seems to install okay cause it creates the directories and extracts the .ear or .war files. My problem is connecting to the application. When I run http://my.host:7778/estore or http://my.host/7778/HelloWorld/HelloWorld I get and error in the Apache error_log that says: File does not exist: c:/oracle/components/apache/apache/htdocs/helloworld/helloworld and File does not exist: c:/oracle/components/apache/apache/htdocs/estore
I have looked and searched everywhere for help but to no avail. Under the WebModule the URL Binding is /HelloWorld and /estore.
Please help me!!! I am going crazy with this.
Thanks,
Grant
PS. I am running 9iAS 9.0.2.0.1 and everything is on 1 Windows 2000 (sp1) machine. Infrastructure and Components in separate dirs with port 7777 and 7778 for each.I'm having the same problem under a solaris system did anyone ever find the solution to this problem. For some reason the server just wants to use the document root instead of the deployed application directory.
-
I have an old web application built using Struts 1.1 framework. I am trying to port this app from 10.1.2 to 10.1.3 OAS.
The application is working fine on 10.1.2 for years but on porting to 10.1.3 application is working partially as some pages are are getting weird error as specified below.
java.lang.IllegalStateException: page is not participating in session
at com.evermind.server.http.EvermindPageContext.getAttribute(EvermindPageContext.java:643)
at org.apache.struts.taglib.html.FormTag.initFormBean(FormTag.java:537)
at org.apache.struts.taglib.html.FormTag.doStartTag(FormTag.java:520)
at _mytest._jspService(_mytest.java:333)I tried debugging the issue but could not find the root cause of the problem.
Line 333 in error is where it's using struts-html form tag in jsp. The content of the page before this tag is displaying fine.
<html:form name="MyTestForm"
method="post"
action="/test"
type="web.MyTestForm">The strange part is, other jsp's in application using the tag are working fine. Not sure why the error is occuring only on some pages.
I have also checked the configuration, deployment setup, libraries, etc and all seems to be in place.
I searched on web but found nothing except this somewhat related issue and tried the solution mentioned in this link http://www.velocityreviews.com/forums/t131230-struts-losing-session-after-jsp-page.html but in vain.
(Not sure if this a Struts issue or OC4J issue so I am trying it on related forums)
Any idea,help, suggestion, solution would be highly appreciated.
ThanksJDeveloper 10.1.3 supports JDK 5.0.
To run JDeveloper 10.1.2 applications in JDeveloper 10.1.3, set J2SE Version to 1.4.2 with Tools>Project Properties>Libraries>J2SE Version.
Maybe you are looking for
-
Set up assistant stuck transferring data from iMac to iMac
Hi there. I've got a 2008 iMac running Mavericks and have just upgraded to the new 27" iMac. During set up I opted to transfer my information from the old iMac using wi fi. Once I saw that it was going to take 51 hours, I found an ethernet cable and
-
Video Freezing, Audio Drops and Numerous Reboots
Last night trying to watch the National geographic HD channel at 8:00pm I got that horrible video freeze (again) that would occur ever 5 secs or so plus audio drop outs and pixelation. I already had a tech out to check this out and he said all the le
-
HT4623 my i phone is frooze on i tunes an i cant get it of what can i do
i phone is frooze help please
-
Multi-level password security in sap portal
Hi Experts, We have a requirement to implement Multi level password security in SAP Portal. i was looking for any expert who can share their experience how this can be achieved and skills,time and effort required for this one. In one of the sdn disc
-
[solved] no sound on thinkpad T61
So yeah.. just got a thinkpad T61 and can't seem to get alsa up and running. I've followed the wiki and the only module it says I need is snd-hda-intel... it seems to be loaded judging from lsmod | grep snd and I've unmuted the channels and everythin