Error using App Builder and Application Loader

Hello,
we created many App's with the App Builder before and after the release of v27 we tried to update a couple of App's. So we get into the App Builder, changed the version from v26 to v27 (didn't changed anything else!!!) and rebuild the App. Now we want to use the Application Loader to upload the App to iTunes Connect, but everytime we receive this message:
"The binary being analyzed must be an executable: /var/folders/9x/.../..._v27_distribution-viewer.zip/viewer.app/viewer"
We rebuild the app several times, updated the App Builder but nothing works. Does anyone has an idea?
Regards
Sven

Was the app updated from previous version to v27 or was created as a brand new v27 app?
Is this same error happening for any other apps you are trying to submit?
What is the version of application loader you are using to upload the distribution-viewer.zip?
The latest version of application loader should be on is 2.8. If you are not, then upgrade to the latest version and try again. You can download the latest version from https://itunesconnect.apple.com/WebObjects/iTunesConnect.woa

Similar Messages

Assigning App Builder and Application roles using Account Administration Tool

If you have a DPS Enterprise or Professional Account and need to assign App Builder or Application role to an id to in case you need to create a new id with these roles, refer to the following documentation:
Assigning App Builder and Application roles in your DPS Professional or Enterprise accounts

gnm,
Please refer to KnowledgeBase 2IDDCHB9: Using Remote Panels with a LabVIEW Applications (EXE) for the information you are looking for.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

App Builder and Distribution Certificate .P12 error

We have a Pro Account. I am building a Single Editon App using v25, running CS6 and OSX 10.8.3. Attached is my screen shot error from App Builder. (v2.6)
The Distribution .P12 certificate is valid (green light) from Apple Developer Portal (see attachment).
I have also tried to revoke and rebuild Certificate and still get this same error but in each instance the "validity date time" changes.
In Apple Developer Portal, I do not see where I can modify or change this validy date.
Help!
Thanks in advance, Tom

See:
http://forums.adobe.com/message/5374736#5374736

How can I find what apple ID I used to register my iMac when I first booted up? I am being told that by using this ID I will be able to go on to the App store and down load iPhoto at no cost. Is this true? My iMac does not have iPhoto resident on it now

How can I find what apple ID I used to register my iMac when I first booted up? I am being told that by using this ID I will be able to go on to the App store and down load iPhoto at no cost. Is this true? My iMac does not have iPhoto resident on it now and I only purchased my new iMac in December 2012
Thanks....

Launch Keychain Access and click on Login in the left hand pane and then on Passwords. Next do search for Apple in the search field at the top and click on Apple ID Authenicication in the list that comes up. That will give you the ID no. and password.
OT

Error 1 when building my application in Labview 2010 Version 10.0f2

I am getting the following error trying to build my application in Labview 2010 Version 10.0f2 and I get the following error:
Error 1 occurred at Invoke Node in AB_Build.lvclass:Copy_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_EXE.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: An input parameter is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @.
=========================
NI-488: Command requires GPIB Controller to be Controller-In-Charge.
Method Name: Linker:Write Info To File
I have searched and can find no real sollutions to this problem. I did the updates and still nothing. Now I can't even build an app with Laview 8.6. I reference several .NET items and refuse to rebuild each and every one of them. My only option at this point is to uninstall all Labview and then reinstall 8.6 so I can do something.
Help if you can.

Hello RBrown
I am really sorry for this inconvenience! This is a known issue.
Can you please attempt the following for me:
When you are building an application, under Advanced please check the last box "Use LabVIEW 8.x file layout"
If that doesn't work, you may need to rebuild the LLB in a separate directory with new names, and use it as the build inclusion.
Here are some forum posts strictly for your information:
I have found users that have had similar issues. I am trying to make this workaround work for you.
http://forums.ni.com/t5/LabVIEW/error-1052/m-p/912192
This is a known issue that some customers have already commented on:
http://forums.ni.com/t5/LabVIEW/NI-Please-don-t-put-illegal-vi-names-in-your-toolkits-thanks/m-p/745...
I have filed a corrective action for this issue and I will add you to the list of individuals who need this issue resolved.
Sincerely,
Greg S.

When to use Apps adapter and DB adapter?

Hi All,
For invoking a PL/SQL API(either a custom or System API) in Oracle Applications from BPEL Process which is better to use?When to use Apps adapter and DB adapter?
Thanks,
ChitraDevi

As Sen correctly states for the DB adapter you have to set the context manually using the fun_global.apps_initilize or Fnd_Client_Info.SET_ORG_CONTEXT. This is usually done in a wrapper procedure.
I wouldn't say I'm an expert in this field as I have only used the APPS adapter for 11.5.10. I believe things have changed a bit for R12, but from my experience with APPS, things change very slow so although R12 is 10g App Server I'm sure the principles are the same.
Sen is also correct saying that base tables are not accessible via the APPS adapter. Basically the apps adapter is there to expose services, base tables are not services.
My recommendation would be different based on the experience of the developer(s). The APPS adapter simplifies the development but may not have the flexibility. The apps adapters sweet spot is those services that are difficult to integrate with, e.g. business services, xml gateway. If these are used heavily I would use the APPS adapter.
What I personally do, even if I'm not using APPS, if I'm connecting to the database I will implement a function, stored procedure, or AQ. It is a little more hassle during deployment, but it treats it more like a service and you are not impacted if the tables change. This is not an endorsement for you to go down this path because it does have a requirement to have PL/SQL knowledge, and it breaks the notion of service abstraction from the DB.
cheers
James

Automate EIS dim builds and data loads

I want to automate the dimesion builds and data loads from my ETL tool (DTS). I have not been able to find anything about scripting EIS automation in the documentation. Is there any?

what you can do is create go into EIS metadata outline and create a member load and data load script. Do this by selecting the Outline menu item, then select member load. click next, on this screen, select only save load script. Click the button "Save scripts" to give it a name. click finish. repeat for the dataload script. (If you are using ASO cubes, you must use separate scripts, you can't do both in one script)Then create a batch file to run the member load and data loads. In DTS, use an execute process task to run the batch file

Getting a "waiting..." or "installing..." message after sideloading an Enterprise signed app onto iOS 7 iPad Mini (among others) using App Builder 3.1.0.

Getting a "waiting..." or "installing..." message after sideloading an Enterprise signed app onto iOS 7 iPad Mini (among others) using App Builder 3.1.0. The app icon remains "dim" on iPad desktop with one of the two messages. The messages change depending upon sync with iTunes or power-up from a shutdown. Tried assigning v30 and v31 as viewer versions, neither appear to work. The certificate signing appear to work without incident. The appropriate profile appears correctly within the iPad does not show it is expired.

This happens when the mobileprovision file does not include the device ID of the device you are attempting to install onto. You need to recreate the .mobileprovision file and make absolutely sure the device ID for the devices are included.
Neil

Why use app server and EJB?

we have a project about Component-based Library for Business Information Systems.
We have chosen Point-Of-Sales System as the type of our system.
why do we need to use app server and EJB?
Hope can have replies soon. Thanks so much!
regards
beginning of EJB

Well, you don't need to. You might want to because transaction management is important for point-of-sales and app server/EJB gives you that for 'almost nothing'.

In making my apple id ready to using app store and itunes i tap on the none in the credit card but it say me contact itunes spport to solve this problem what have I do ?

In making my apple id ready to using app store and itunes i tap on the none in the credit card but it say me contact itunes spport to solve this problem what have I do ?

credit card it tells me my credit card is not valid for the store.
Hi Don ...
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
From here > The Complete Guide to Using the iTunes Store | iLounge Article
The iTunes and Mac App Store are one in the same.
And check out this support article here > iTunes Store: My credit card's security code or zip code does not match my bank's records

Error: The Task has failed to load on Execute Package Task using TFS Build and MSBuild.exe on dedicated Build Machine.

I'm trying to automate my building and deployment of SSIS packages using TFS build definitionss in conjunction with MSBuild.exe on a separate build machine.
I have successfully built and deployed my projects but receive the following error:
Error: Failed to load task "etl_UWP_Stage_tstg_7_Large",type "". The contact information for this task is "Microsoft Corporation: Microsoft SQL Server .... "
This error happens at runtime as well as if I perform a "Validate..." on the SSIS Catalog on the server.
This only occurs when trying to execute a package that contains an Execute Package Task. Any other packages that are doing the actual work are working just fine.
In addition, when I do the MSBuild from my developer machine with the same deployment process everything works fine, even the Execute Package Task.
I can even open up the project on the build machine in VS2012, rebuild all, then deploy and everything works fine.
Some things I've considered/verified:
1) Visual Studio 2012 and Visual Studio Data Tools 2012 are both on the build machine and my local machine.
2) The .NET version being used by VS2012 is the same on the build machine and my local machine.
3) I find it suspicious that the "Type" referenced in the error above is blank...but not sure where to go with that.
4) Obvious difference is that during the TFS Build and Deploy on the build machine, everything is running under the TFS Service account, rather than my account...once again...not sure where to go with this, but it is a significant difference.
Has anyone had similar issues or have any thoughts on things to try?
Thanks,
Jason

Not sure why I couldn't find this answer in my earlier searches...
But this thread solved it for me:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/3aa1e324-da32-4ea0-865c-c69f610ef262/failed-to-load-execute-package-task-error?forum=sqlintegrationservices
Essentially I had to install SSIS on the build machine so that the 64-bit version for
ExecPackageTask.dll, was available. I did this from the original media CD selection Integration Services as a feature.
Hope this helps someone in the future.

App update with application loader: bundle is invalid - CFBundleShortVersionString error

Hi,
A client of mine is trying to update their app. They created a new multi-issue viewer (using ver18).
When uploading this app with application loader they receive the following error:
"This bundle is invalid. The key CFBundleShortVersionString in the info.plist file must contain a higher version than that of the previously uploaded version".
(see screenshot)
When checking, the update app indeed had a lower version (iTunes) number than the one already on the app store. So I figured that was the issue, but when selecting a higher version and trying again the error still persists.
I couldn't really find anyone on the forum who previously had this issue.
Tips are always welcome
Thanks

Hi
I have the same problem, we built the first app for our client through WoodWing, now we want to update the app with the Adobe one. During the upload of the new app, created with the Adobe Viewer Builder we get this error code:
This bundle is invalid. The key CFBundleShortVersionString in the Info.plist file must contain a higher version than that of the previously uploaded version.
When we open the Info.plist we can see that the Adobe Viewer Builder creates 1.0.1 for the Bundle Version String short, while the older WoodWing app has 2.1.
Marketing version in Viewer Builder = Bundle Version String Short or ?
That means everybody who is changing from the WoodWing to the Adobe reader needs to go through Adobe?

Developing Iphone App using Flash Builder and Flex Air Mobile

I started developing an Iphone app using the trial version of Flash Builder and was pretty impressed with how easy it was, then i hit problems:
Trying to submit my app, I was getting invalid binary, using google i tracked this down to a change in the Apple App Store meaning that all apps needed to have native iphone 5 support, which meant updating to Air SDK 3.7
Updating to AIR SDK 3.7 was a nightmare (mainly as a result of my failure to read the small print)
Once I got SDK 3.7 to work with flash builder / flex mobile i though i was there.
However now i can produce a fast build but everytime i try and produce a standard / production build i get strange errors (air 3.8 does the same).
My Question is - before i actually buy Flash Builder has anybody actually achieved the following:
     Building an Iphone App using:
     Flash Builder 4.7    (running on OSX)
     Flex Mobile 4.6
     Air 3.7
If so how ?
cheers
Toby

Thanks for your reply, its nice to know its not just me.
the error i got when submitting to the App store where due to native support for IPHONE 5 which is now mandatory (from May 1st), looking around the internet the common soloution seemed to be upgrading to Air 3.7.
The strange erorrs on 3.7 revolve around compiling a standard / production build (fast build works fine)
the error is always the same (snippet shown below):
Error occurred while packaging the application:
Undefined symbols for architecture armv7:
"__ZN7avmplus8Debugger9debugLineEi", referenced from:
      __ZN7avmplus9MethodEnv9debugExitEPNS_13CallStackNodeE in AOTBuildOutput-4.o
      __ZN7avmplus11BaseExecMgr22debugEnterExitWrapperNEPNS_9MethodEnvEiPj in AOTBuildOutput-4.o
I have completly failed to work out why, but my gut feeling is its something to do with how the mac is compiling the code in standard build and unable to find a library it needs.
cheers
Toby

Error 10 when building an application in LV8 and Report generation toolkit 1.1.1

I am trying to build an application using LV8.0.1 and Report generation toolkit 1.1.1 and i get this error.
Error 10 occurred at ABAPI Dist Copy Non-VI Files.vi -> ABAPI Dist Build LLB Image.vi -> ABAPI Copy Files and Apply Settings.vi -> EBEP_Invoke_Build_Engine.vi -> EBUIP_Build_Invoke.vi -> EBUIP_Build_Invoke.vi.ProxyCaller
Any ideas?
Scientia est potentia!

Did you attempt to add the _wordsub.llb and _excelsub.llb files to the application as support files? I believe in LabVIEW 8.0 instead of adding the entire LLBs you should just add the _Word Dynamic VIs.vi and _Excel Dynamic VIs.vi as dynamic VIs. I think I've seen a similar post on the discussion forums in the past that recommended this.
If this suggestion doesn't help, please reply, and attach a simple VI and .lvproj file demonstrating the problem so I can investigate further.
Good luck,
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Accidentally deleted all my applications and associated files using App Cleaner and when I put them all back in to Applications none of them work now

Hi last night I stupidly downloaded App Cleaner and deleted all my applications and their associated files. Because I panicked I wasn't able to use the "put back" so I just dragged everything back in to Applications. Now none of the applications will work as some of the associated files aren't in the correct location and some of the files aren't even applications. i did not back up my system with Time Machine (lesson learnt). Please please can someone help me, I know that Mac's don't have a roll back like PC's

Buddhaguru wrote:
I know that Mac's don't have a roll back like PC's
They do. It's called Time Machine.
You need to reinstall all of your Apps. That should replace all of the support files you nuked.

Error using App Builder and Application Loader

Similar Messages

Maybe you are looking for