Error using Bapi_PO_Change for update custom fields
Dear Expert,
I have requirement for update custom field in table ekko. I used BAPI_PO_CHANGE with PO_number as a key. Then i put the value of custom field in segment TABLES - EXTENSIONIN.
But I get error : "ERROR TRANSFERING EXTENSIONIN DATA FOR ENHANCEMENT CI_EKKODB".
When I checked, I found the difference between data type the value for BAPI_PO_CHANGE (Usinf structure BAPIPAREX) and data type for custom field in table EKKO.
Data Type in BAPI_PO_CHANGE is CHAR (you can see in structure BAPIPAREX). And data type for the custom field is DECIMAL.
I found the note '1124803', but the correction note was not applicable for us because our released system is 500.
Is there any suggestion or solution for resolve our problem?
Really appreciate your help.
Thanks.
Hi Laxmikanth Bethi ,
I tried with BAPI_PO_CHANGE in level header, and SAP was support the BAPI. And also i tried to appending the same fields in MEPOHEADR & MEPOHEADERX structures, but the problem is the type of my custom fields are DECIMAL, then the type MEPOHEADR & MEPOHEADERX structures are CHARACTER. So i got the error : "ERROR TRANSFERING EXTENSIONIN DATA FOR ENHANCEMENT CI_EKKODB".
Because the types are difference.
Have you any suggestion to solve this problem?
Really appreciate for your input.
Similar Messages
-
How Update Custom fields for EABL DB table by using BAPI_MTRREADDOC_UPLOAD
Hi friends,
How can I Update Custom fields for EABL DB table by using BAPI_MTRREADDOC_UPLOAD
for the parameter EXTENSIONIN of type BAPIPAREX
I am passing the Structure as BAPI_TE_EABL
in that structure MRIDNUMBER as EABL-ABLBELNR field value
ZMESSAGE some text of 30 char and
ZSKIPC of 2 char
but I am not able to update that data for the MRIDNUMBER (ABLBELNR ) in DB table EABL
I am getting RETURN Structure message type E
as
"Upload interim entries: Maintain one table only"
Can any one provide me solution
Thanks in Advance
GaneshHi,
Refer the following SAP notes.
1. Note 485557 - BAPI_REQUISITION_CREATE: 'EXTENSIONIN' customer enhancements
2. Note 584902 - BAPI_REQUISITION_CHANGE: ExtensionIn not connected
3. Note 792132 - EBAN, EBKN: user-defined fields are not filled
Regards,
Harish -
Need to update custom fields in MSEG table using "BAPI_GOODSMVT_CREATE"
Hi All,
There is a requirement to update custom fields in table MSEG which are part of append structure. There is a option to update the custom fields using the one of the tables parameters "EXTENSIONIN". Anyone please advice how can I update the custom field thru EXTENSIONIN.
Thanks in advance.
cheers,
Vijaysee the help
http://help.sap.com/saphelp_nw04/helpdata/en/c3/4099948b8911d396b70004ac96334b/frameset.htm
Regards
Kiran Sure -
Updating custom fields in DFKKOP when returning a refund
Hi all,
I am looking for an event to update custom fields on DFKKOP on the item level when returning a refund in PSCD. So far I have tried using events 290, 295. I know that somewhere the clearing document(AUGBL) is cleared. Haven't as yet found out where.
Kind regards,
Ameeta
Moderator note: Duplicate postings in several forums is a violation of the rules of engagement. Please use this thread for responses Updating custom fields in DFKKOP during refunds retunrs
Edited by: William Eastman on Mar 9, 2010 2:51 PMHi all,
I am looking for an event to update custom fields on DFKKOP on the item level when returning a refund in PSCD. So far I have tried using events 290, 295. I know that somewhere the clearing document(AUGBL) is cleared. Haven't as yet found out where.
Kind regards,
Ameeta
Moderator note: Duplicate postings in several forums is a violation of the rules of engagement. Please use this thread for responses Updating custom fields in DFKKOP during refunds retunrs
Edited by: William Eastman on Mar 9, 2010 2:51 PM -
Updating custom fields in BSEG table
Hi Experts,
I searched through SDN but did not find satisfactory answer to my problem.
The scenario is that FIDCC2 Idoc is coming to SAP system. This Idoc has extended to include few custom fields. These fields need to be updated in table BSEG. Table BSEG also contains these custom fields. However, the Idoc processing routine is not updating custom fields in table BSEG with the data coming in Idoc. How can I do that?
Thanks in advance,
NetreyThis message is processed by function module IDOC_INPUT_FIDCC2. If you drill down into the code a little bit, you should be able to find BTE/open FI or user exit calls (CALL CUSTOMER-FUNCTION) before the document is being posted.
I found two that are using the ACCIT structure for passing the line items, which should contain your customer fields as well, if they were added to BSEG properly (via transaction OXK3).
Please have a look.
Thomas -
Extending sales order change BAPI and updating custom fields
Hi
i added 3 new fields into VA01/02/03 screen.i added at the header level in the additional data tab B area and appended them in VBAK table.
i want to change these values using sales order change BAPI.i added the fields in the structure VBAKKOZ,VBAKKOZX,BAPE_VBAK,BAPE_VBAKX.
may i know what else i need to do?should i move them anywhere with in the code or does the bapi take those values automatically using EXTENSIONIN structure?
also can some one send me code to actually check if bapi is changing my values?
if poss tell me how should i populate values into BAPI.After adding field in structures VBAKKOZ,VBAKKOZX,BAPE_VBAK,BAPE_VBAKX, create pair of name-value pair extensiot structure and value.
Fill values as follows :
Data : ls_parex TYPE bapiparex,
lt_parex TYPE STANDARD TABLE OF bapiparex.
ls_parex-structure = 'BAPE_VBAK'.
ls_parex-valuepart1+0(10) = Sales order no
ls_parex-valuepart1+10(XX) = somevalue. <---- Value for custom field no 1
ls_parex-valuepart1+XX(XX) = somevalue. <---- Value for custom field no 2
APPEND ls_parex TO lt_parex .
clear ls_parex.
ls_parex-structure = 'BAPE_VBAKX'.
ls_parex-valuepart1+0(10) = Sales order no
ls_parex-valuepart1+10(1) = 'X'. <--- checkbox mark for custom field no 1
ls_parex-valuepart1+11(1) = 'X'. <--- checkbox mark for custom field no 2
APPEND ls_parex TO lt_parex.
Same pair for VBAKKOZ & VBAKKOZX
Updating custom fields
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
salesdocument = Sales order number
order_header_inx = 'U' <--- U for update
TABLES
extensionin = lt_parex[].
Edited by: nkarwa on Oct 25, 2010 12:39 PM -
Using BAPI_PO_CHANGE to update PO with item actegory B
Hi Experts,
I have a requirement to update the PO with item category B which is created by referring PR having account assignment category N(.( So I have a PO with Acc assignment N now have to update the item category with B ). I am using BAPI_PO_CHANGE to update the item category with B .in me22n system will prompt the Limits ( overall limit , expected value) and Network details ( like GL acc and Network and activity code) so i am passing lt_poitem,lt_poitemx,lt_polimits,lt_poaccount,lt_poaccountx,lt_POSRVACCESSVALUES. System is issuing a message Buffer table is not up-to-date . Please let me know if any one updated the PO with item category B using BAPI_PO_CHANGE and please provide sample code for the same if possible. Thanks in advance.
Thanks
PraveeHi Experts,
I am passing the required structure as below .
CALL FUNCTION 'BAPI_PO_CHANGE'
EXPORTING
purchaseorder = v_po
TABLES
return = lt_return
poitem = lt_poitem
poitemx = lt_poitemx
polimits = lt_polimits
poaccount = lt_poaccount
poaccountx = lt_poaccountx
POSRVACCESSVALUES = lt_POSRVACCESSVALUES
POCONTRACTLIMITS = lt_POCONTRACTLIMITS
POSERVICES = lt_POSERVICES.
Now i am getting a message below messages from BAPI :
S 06 023 Indirect PO (ZSTA) 4506000481 changed
I ME 664 Change Item Category could not be effected
I ME 664 Change Item Category could not be effected
I can see that the PO is not got updated with any of values.Please help me to resolve this issue.
Thanks
PRavee. -
How to maintain change history for a custom field
Hi All,
I have added a new custom field in standard table FKKVKP by appending a new structure to FKKVKP. Now this custom field will appear in transaction CAA2. My requirement is I have to maintain change history for my custom field. In transaction SCDO I have seen that there is an object MKK_VKONT that maintains change history for FKKVKP entries. But I am not aware how to adjust this field so that SAP generates change history for my custom field as well.
Thanks in advance,
VenkatVenkatesh,
DFKKTAXEX
FKKVK
FKKVKP
FKKVK_CORR
I have never used these tables but I have working experience with change docs.
The Z field which you have added should be in the above structures, then you should be able to see that field in the changes.
Of course change document should be set to that field-data element. -
How to chage the display name in SC browser for the custome fields?
Hi,
I created 2 custom fields for Shopping cart in SRM. How to chage the display name in SC browser for this custome fields?
Thanks
KevinHi Kevin,
when you have defined your customer fields, you have created new fields in the CUF structures. The labels displayed on the SC screen come from the data element you have assigned to those cust fields in the include structure.
If you have used a std data element, then you can change its translation (attention, this will impact all structures, tables... abap objects using this data element).
If you have created a Z data element, then adapt its description accordingly.
Rgds
Christophe
PS: please reward points for helpfull answers -
BSP: F4 Help For a custom field...
Hi All,
I need to display search help for a custom field in one of my custom view.
Search Help for the custom field is already implemented.. but how can i use it in BSP View!.
In the standard CRM_IC application i couldn't find any similar search help scenario, coz it is calling some standard methods like ShowF4KeyAndValueHelp3,
ICWCShowF4HelpExtern by passing the structure and field name!.
I think these standard methods will work only with the fields which have value help table at the data element level. As the custom field that i m using does not have any value help i cant go for this method i guess!.
Any Help/Hint?..
Thank You,
sudeep v d.Hello Sudeep,
Here are some more helpful links .Please refer them .
Re: Inputfield value for a tableView from a help window
/people/thomas.jung3/blog/2005/08/22/bsp-value-input-help-popups-version-30
F4 help using javascript
Please let me know the feedback.
Warm Regards,
Rakesh Kumar Verma -
How to set a default date for a custom field of Date type in project server 2010.
hi,
can somebody help me.
How Can i set the default date for a custom field of date type in project server 2010 ?Dear Rohan,
You can set default value to custom field thru Lookup table. Assign lookup table to custom field and set default value to some lookup value (Note: check the “Choose a value to use as a default when adding new item” checkbox).
Regards,
Avinash kumar | Blog:http://avigr8.wordpress.com | If you found this post helpful, please “Vote as Helpful”. If it answered your question, please “Mark as Answer”. -
BAPI_EQUI_CREATE to update custom fields.
Is it possible to update custom fields in Equipment master (EQUI table) using FM 'BAPI_EQUI_CREATE '? If yes, pls let me know which structure needs to updated.
Thanks,
DeepaI would think that just the name would be a key indicator.....CREATE but you want to Update....Why wouldn't you use BAPI_EQUI_CHANGE to update existing equipment records. I would expect to have to extend the BAPI to handle the new fields.
-
Search Help for Infotype Custom Field
Hi,
I have created a search help for a custom field in an infotype. What would be the best way of filtering the help selection based on infotype values such as molga, begda, endda?
Thanks in advance.
/ElvezHi Nishanth,
thanks for your reply, perhaps I should clarify my question:
1) I have a custom field in an infotype
2) I have a table containing the search help information
3) I assigned a search help to the custom field
4) I have activated a search help exit
The problem is that the information that I get from the custom field is not sufficient for making the selection. Therefore, I would like to somehow get hold of the addition information, such as BEGDA, ENNDA, MOLGA, to do a proper selection in the search help exit. How can I achieve that?
I read something about function module DYNP_VALUES_READ -would it be possible to call this function module from my search help exit and thereby reach my goal?
/Elvez
Message was edited by: Elvez -
How to prepopulate value in webapps input fields or for any custom fields in for any other forms?
What do you want to populate the form with?
-
SRM Portal - Search help for a custom field
Hi,
I have added a custom field to the SRM Portal (5.0) shopping cart, by adding the field to structures INCL_EEW_PD_ITEM_CSF INCL_EEW_PD_ITEM_CSF_SC.
However, I need to filter the search help for that custom field, based on values & relationships stored in a Z table.
Is this possible? How? Please help.
Thank You.Currently, my idea would be to create a search help for the custom field & filter the values in a search help exit. However, would I be able to get other field values (standard) from SRM into my search help exit?
Maybe you are looking for
-
Hyperon Essbase/Planning 11.1.2 When I attempt to LCM a file to a new application I get the following error - what causes this? Cannot retrieve migration status for importArtifact(s). Nested exception is [MESSAGE - org.xml.sax. SAXParseException: XML
-
Okay, I have a document in which I used a font that I downloaded for free (yeah, I know*) and which has no italics set. After I had used it and gotten the work approved, I was asked to italicize a web address that was set in this font. So, I skewed i
-
Severe Security Issue with Sharing Permissions and Windows
I recently discovered a severe Security issue with the windows sharing an permission settings: I have two users, an admin user and a parental controlled user. On my mac mini, i have a external harddrive connected. On the harddrive, i have three folde
-
How to run a script A from a button "Button 1" ?
Hi all, I've got this problem for having a window with several buttons named "Button 1" "Button 2"... and run the script "Script A" if we click on the button 1, the script "Script B" if we click on the button 2 etc... Here is my short script : #targe
-
Backup RMAN (SOLARIS 8 --- WINDOWS2000)
I can make a backup full with RMAN (Solaris 8 - Oracle 9.2.0.1) and restore it on Windows 2000(2003) - Oracle 9.2.0.1? If as I can make? Thanks