Error using bulk loader

HI There.
I have currently loaded many millions of triples via the bulk laoder.
I tried to load 50 million triples last week. It ran for two days and then threw the error
ERROR at line 1:
ORA-13199: APP-Load:CODE=-30036
ORA-6512: at "MDSYS.SDO_RDF_INTERNAL", line 2342
ORA-6512: at "MDSYS.SDO_RDF" line 294
ORA-6512: at "MDSYS.RDF_APIS", line 542
ORA-6512: at line 1
I'm using Oracle 11g with the jena patch applied.
This is the first time I've had a problem.
All tablespaces are on auto extend and there is plenty of disk sapce left.
Could you tell me the likely causes of the problem.
Cheers
Phil

Hi There
There are no indexes on the data or triggers.
It is the error I am more worried about not the speed.
What is the most likely cause of the error?
Cheers
Phil

Similar Messages

  • Dump error while bulk load to Sybase IQ

    Hi ,
    I am loading data from Sybase IQ source to Sybase IQ target database.  I can load the data in normal mode.  But If I am trying bulk loading it is throwing dump error. Earlier I loaded so many times using bulk load but I didn't face any issue. We upgraded to Sybase IQ 16.0 SP3 to SP8. Now We are facing this type of difficulties. Please find the attached log file for error.
    Please help me how to resolve this issue.
    Thanks & Regards,
    Ramana.

    Hi Vijay,
    follow the steps below (May Help you)
    Goto Monitor screen>Status Tab> using the wizard or the menu path >Environment -> Short dump> In the warehouse
    Select the Error and double click
    Analyse the error from the message.
    1.-->Go to Monitor
    -->Transactional RFC
    -->In the Warehouse
    -->Execute
    -->EDIT
    -->Execute LUW
    Refresh the Transactional RFC screen and go to the Data Target(s) which have failed and see the status of the Request-->Now it should be green.
    2.In some cases the above process will not work (where the Bad requests still exists after the above procedure).
    In that case we need to go to the Data Targets and need to delete the bad requests and do the update again
    Regards,
    BH

  • Error when Bulk load hierarchy data

    Hi,
    While loading P6 Reporting databases following message error appears atthe step in charge of Bulk load hierarchy data into ODS.
    <04.29.2011 14:03:59> load [INFO] (Message) - === Bulk load hierarchy data into ODS (ETL_LOADWBSHierarchy.ldr)
    <04.29.2011 14:04:26> load [INFO] (Message) - Load completed - logical record count 384102.
    <04.29.2011 14:04:26> load [ERROR] (Message) - SqlLoaderSQL LOADER ACTION FAILED. [control=D:\oracle\app\product\11.1.0\db_1\p6rdb\scripts\DATA_WBSHierarchy.csv.ldr] [file=D:\oracle\app\product\11.1.0\db_1\p6rdb\temp\WBSHierarchy\DATA_WBSHierarchy.csv]
    <04.29.2011 14:04:26> load [INFO] (Progress) - Step 3/9 Part 5/6 - FAILED (-1) (0 hours, 0 minutes, 28 seconds, 16 milliseconds)
    Checking corresponding log error file (see below) I see that effectively some records are rejected. Question is: How could I identify the source of the problem and fix it?
    QL*Loader: Release 11.1.0.6.0 - Production on Mon May 2 09:03:22 2011
    Copyright (c) 1982, 2007, Oracle.  All rights reserved.
    Control File:   DATA_WBSHierarchy.csv.ldr
    Character Set UTF16 specified for all input.
    Using character length semantics.
    Byteorder little endian specified.
    Data File:      D:\oracle\app\product\11.1.0\db_1\p6rdb\temp\WBSHierarchy\DATA_WBSHierarchy.csv
    Bad File:     DATA_WBSHierarchy.bad
    Discard File:  none specified
    +(Allow all discards)+
    Number to load: ALL
    Number to skip: 0
    Errors allowed: 50
    Bind array:     64 rows, maximum of 256000 bytes
    Continuation:    none specified
    Path used:      Conventional
    Table WBSHIERARCHY, loaded from every logical record.
    Insert option in effect for this table: APPEND
    TRAILING NULLCOLS option in effect
    Column Name                  Position   Len  Term Encl Datatype
    PARENTOBJECTID                      FIRST     *  WHT      CHARACTER
    PARENTPROJECTID                      NEXT     *  WHT      CHARACTER
    PARENTSEQUENCENUMBER                 NEXT     *  WHT      CHARACTER
    PARENTNAME                           NEXT     *  WHT      CHARACTER
    PARENTID                             NEXT     *  WHT      CHARACTER
    CHILDOBJECTID                        NEXT     *  WHT      CHARACTER
    CHILDPROJECTID                       NEXT     *  WHT      CHARACTER
    CHILDSEQUENCENUMBER                  NEXT     *  WHT      CHARACTER
    CHILDNAME                            NEXT     *  WHT      CHARACTER
    CHILDID                              NEXT     *  WHT      CHARACTER
    PARENTLEVELSBELOWROOT                NEXT     *  WHT      CHARACTER
    CHILDLEVELSBELOWROOT                 NEXT     *  WHT      CHARACTER
    LEVELSBETWEEN                        NEXT     *  WHT      CHARACTER
    CHILDHASCHILDREN                     NEXT     *  WHT      CHARACTER
    FULLPATHNAME                         NEXT  8000  WHT      CHARACTER
    SKEY                                                      SEQUENCE (MAX, 1)
    value used for ROWS parameter changed from 64 to 21
    Record 14359: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
    ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
    Record 14360: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
    ORA-01722: invalid number
    Record 14361: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
    ORA-01722: invalid number
    Record 27457: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
    ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
    Record 27458: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
    ORA-01722: invalid number
    Record 27459: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
    ORA-01722: invalid number
    Record 38775: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
    ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
    Record 38776: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
    ORA-01722: invalid number
    Record 38777: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
    ORA-01722: invalid number
    Record 52411: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
    ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
    Record 52412: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
    ORA-01722: invalid number
    Record 52413: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
    ORA-01722: invalid number
    Record 114619: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
    ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
    Record 114620: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
    ORA-01722: invalid number
    Record 127921: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
    ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
    Record 127922: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
    ORA-01722: invalid number
    Record 164588: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
    ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
    Record 164589: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
    ORA-01722: invalid number
    Record 171322: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
    ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
    Record 171323: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
    ORA-01722: invalid number
    Record 186779: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
    ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
    Record 186780: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
    ORA-01722: invalid number
    Record 208687: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
    ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
    Record 208688: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
    ORA-01722: invalid number
    Record 221167: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
    ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
    Record 221168: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
    ORA-01722: invalid number
    Record 246951: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
    ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
    Record 246952: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
    ORA-01722: invalid number
    Table WBSHIERARCHY:
    +384074 Rows successfully loaded.+
    +28 Rows not loaded due to data errors.+
    +0 Rows not loaded because all WHEN clauses were failed.+
    +0 Rows not loaded because all fields were null.+
    Space allocated for bind array:                 244377 bytes(21 rows)
    Read   buffer bytes: 1048576
    Total logical records skipped:          0
    Total logical records read:        384102
    Total logical records rejected:        28
    Total logical records discarded:        0
    Run began on Mon May 02 09:03:22 2011
    Run ended on Mon May 02 09:04:07 2011
    Elapsed time was:     00:00:44.99

    Hi Mandeep,
    Thanks for the information.
    But still it doesnot seem to work.
    Actally, i have Group ID and Group Name as display field in the Hiearchy table.
    Group ID i have directly mapped to Group ID.
    I have created a Split Hierarchy of Group Name and mapped it.
    I have also made all the options configurations as per your suggestions, but it doenot work still.
    Can you please help.
    Thanks,
    Priya.

  • Error using BULK Collect with RECORD TYPE

    hello
    I have written a simple Procedure by declaring a record type & then making a variable of NESTED Table type.
    I then select data using BULK COLLECT & tryin to access it through a LOOP.....Getting an ERROR.
    CREATE OR REPLACE PROCEDURE sp_test_bulkcollect
    IS
    TYPE rec_type IS RECORD (
    emp_id VARCHAR2(20),
    level_id NUMBER
    TYPE v_rec_type IS TABLE OF rec_type;
    BEGIN
    SELECT employee_id, level_id
    BULK COLLECT INTO v_rec_type
    FROM portfolio_exec_level_mapping
    WHERE portfolio_execp_id = 2851852;
    FOR indx IN v_rec_type.FIRST..v_rec_type.LAST
    LOOP
    dbms_output.put_line('Emp -- '||v_rec_type.emp_id(indx)||' '||v_rec_type.level_id(indx));
    END LOOP;
    END;
    Below are the ERROR's i am getting ....
    - Compilation errors for PROCEDURE DOMRATBDTESTUSER.SP_TEST_BULKCOLLECT
    Error: PLS-00321: expression 'V_REC_TYPE' is inappropriate as the left hand side of an assignment statement
    Line: 15
    Text: FROM portfolio_exec_level_mapping
    Error: PL/SQL: ORA-00904: : invalid identifier
    Line: 16
    Text: WHERE portfolio_execp_id = 2851852;
    Error: PL/SQL: SQL Statement ignored
    Line: 14
    Text: BULK COLLECT INTO v_rec_type
    Error: PLS-00302: component 'FIRST' must be declared
    Line: 19
    Text: LOOP
    Error: PL/SQL: Statement ignored
    Line: 19
    Text: LOOP
    PLZ Help.

    and with a full code sample:
    SQL> CREATE OR REPLACE PROCEDURE sp_test_bulkcollect
      2  IS
      3  TYPE rec_type IS RECORD (
      4  emp_id VARCHAR2(20),
      5  level_id NUMBER
      6  );
      7  TYPE v_rec_type IS TABLE OF rec_type;
      8  v v_rec_type;
      9  BEGIN
    10     SELECT empno, sal
    11     BULK COLLECT INTO v
    12     FROM emp
    13     WHERE empno = 7876;
    14     FOR indx IN v.FIRST..v.LAST
    15     LOOP
    16        dbms_output.put_line('Emp -- '||v(indx).emp_id||' '||v(indx).level_id);
    17     END LOOP;
    18  END;
    19  /
    Procedure created.
    SQL>
    SQL> show error
    No errors.
    SQL>
    SQL> begin
      2     sp_test_bulkcollect;
      3  end;
      4  /
    Emp -- 7876 1100
    PL/SQL procedure successfully completed.

  • Error using XML Loader: XML not well-formed

    Hi all,
    I am facing a problem using the XML loader in xMII 12.0 when trying to load the following XML file:
    <?xml version="1.0" encoding="UTF-8"?>
    <Users>
      <User>
        <UserID>IMXOO</UserID>
        <CWID>IMXOO</CWID>
        <Prename>Michael</Prename>
        <Surname>Otto</Surname>
        <CreatedOn>2001-12-31T12:00:00</CreatedOn>
        <CreatedBy>IMXOO</CreatedBy>
      </User>
    </Users>
    I also tried a most basic XML file which shows the same error:
    <?xml version="1.0"?>
    <ausgabe>
      <anzeige>Testausgabe</ausgabe>
    </ausgabe>
    To my understanding both files are well-formed, however xMII shows the error:
    "The markup in the document following the root element must be well-formed."
    Do I break any rules concerning the markup? IE loads the files without showing any errors.
    Best Regards
    Michael

    Jeremy,
    again you gave the key to the solution. When the error occured, I have set up the following path within the xMII workbench:
    "Catalog-Tab"
    <server>
      > Sandbox
            > XML
                myFile.xml
    When I tried to load the mxFile.xml with the XML Loader, I got the error described above (XML not well-formed). I also cannot drag the file into a transaction in the workbench. I have manually configured the XML Loader with "http://<server:port>/XMII/CM/Sandbox/XML/mxFile".
    Now using your hint I have changed to the "Web-Tab":
    "Web-Tab"
    <server>
        > Sandbox
            > WEB
                > XML
                    myFile.xml
    Then all works fine, when I now drag the file into the transaction. As you described, an XML Loader action is created with configuration "db://Sandbox/WEB/XML/myFile.xml" and the XML is loaded correctly.
    Thanks for your help!
    Best regards
    Michael

  • SSRS 2005 report: Cannot bulk load Operating system error code 5(Access is denied.)

    I built a SSRS 2005 report, which calls a stored proc on SQL Server 2005. The proc contains following code:
    CREATE TABLE #promo (promo VARCHAR(1000))
    BULK
    INSERT #promo
    FROM '\\aseposretail\c$\nz\promo_names.txt'
    WITH
    --FIELDTERMINATOR = '',
    ROWTERMINATOR = '\n'
    SELECT * from #promo
    It's ok when I manually execute the proc in SSMS.
    When I try to run the report from BIDS I got following error:
    *Cannot bulk load because the file "\aseposretail\c$\nz\promo_names.txt" could not be opened. Operating system error code 5(Access is denied.).*
    Note: I have gooled a bit and see many questions on this but they are not relevant because I CAN run the code no problem in SSMS. It's the SSRS having the issue. I know little about the security of SSRS.

    I'm having the same type of issue.  I can bulk load the same file into the same table on the same server using the same login on one workstation, but not on another.  I get this error:
    Msg 4861, Level 16, State 1, Line 1
    Cannot bulk load because the file "\\xxx\abc.txt" could not be opened. Operating system error code 5(Access is denied.).
    I've checked SQL client versions and they are the same, I've also set the client connection to TCP/IP only in the SQL Server Configuration Manager.  Still this one workstation is getting the error.  Since the same login is being used on both workstations and it works on one  but not the other, the issue is not a permissions issue.  I can also have another user login into the bad workstation and have the bulk load fail, but when they log into their regular workstation it works fine.  Any ideas on what the client configuration issue is?  These are the version numbers for Management Studio:
    Microsoft SQL Server Management Studio 9.00.3042.00
    Microsoft Analysis Services Client Tools 2005.090.3042.00
    Microsoft Data Access Components (MDAC) 2000.085.1132.00 (xpsp.080413-0852)
    Microsoft MSXML 2.6 3.0 5.0 6.0
    Microsoft Internet Explorer 6.0.2900.5512
    Microsoft .NET Framework 2.0.50727.1433
    Operating System 5.1.2600
    Thanks,
    MWise

  • Bulk Load option doesn't work

    Hi Experts,
    I am trying to load data to HFM using Bulk load option but it doesnt work. When I Change the option to SQL insert, the loading is successful. The logs say that the temp file is missing. But when I go to the lspecified location , I see the control file and the tmp file. What am I missing to have bulk load working?Here's the log entry.
    2009-08-19-18:48:29
    User ID...........     kannan
    Location..........     KTEST
    Source File.......     \\Hyuisprd\Applications\FDM\CRHDATALD1\Inbox\OMG\HFM July2009.txt
    Processing Codes:
    BLANK............. Line is blank or empty.
    ESD............... Excluded String Detected, SKIP Field value was found.
    NN................ Non-Numeric, Amount field contains non numeric characters.
    RFM............... Required Field Missing.
    TC................ Type Conversion, Amount field could be converted to a number.
    ZP................ Zero Suppress, Amount field contains a 0 value and zero suppress is ON.
    Create Output File Start: [2009-08-19-18:48:29]
    [TC] - [Amount=NN]     Batch Month File Created: 07/2009
    [TC] - [Amount=NN]     Date File Created: 8/6/2009
    [TC] - [Amount=NN]     Time File Created: 08:19:06
    [Blank] -      
    Excluded Record Count.............. 3
    Blank Record Count................. 1
    Total Records Bypassed............. 4
    Valid Records...................... 106093
    Total Records Processed............ 106097
    Begin Oracle (SQL-Loader) Process (106093): [2009-08-19-18:48:41]
    [RDMS Bulk Load Error Begin]
         Message:      (53) - File not found
         See Bulk Load File:      C:\DOCUME~1\fdmuser\LOCALS~1\Temp\tWkannan30327607466.tmp
    [RDMS Bulk Load Error End]
    Thanks
    Kannan.

    Hi Experts,
    I am facing the data import error while importing data from .csv file to FDM-HFM application.
    2011-08-29 16:19:56
    User ID...........     admin
    Location..........     ALBA
    Source File.......     C:\u10\epm\DEV\epm_home\EPMSystem11R1\products\FinancialDataQuality\FDMApplication\BMHCFDMHFM\Inbox\ALBA\BMHC_Alba_Dec_2011.csv
    Processing Codes:
    BLANK............. Line is blank or empty.
    ESD............... Excluded String Detected, SKIP Field value was found.
    NN................ Non-Numeric, Amount field contains non numeric characters.
    RFM............... Required Field Missing.
    TC................ Type Conversion, Amount field could be converted to a number.
    ZP................ Zero Suppress, Amount field contains a 0 value and zero suppress is ON.
    Create Output File Start: [2011-08-29 16:19:56]
    [ESD] ( ) Inter Co,Cash and bank balances,A113000,Actual,Alba,Dec,2011,MOF,MOF,,YTD,Input_Default,[NONE],[NONE],[NONE],1
    [ESD] ( ) Inter Co,"Trade receivable, prepayments and other assets",HFM128101,Actual,Alba,Dec,2011,MOF,MOF,,YTD,Input_Default,[NONE],[NONE],[NONE],35
    [ESD] ( ) Inter Co,Inventories ,HFM170003,Actual,Alba,Dec,2011,MOF,MOF,,YTD,Input_Default,[NONE],[NONE],[NONE],69
    [ESD] ( ) Inter Co,Financial assets carried at fair value through P&L,HFM241001,Actual,Alba,Dec,2011,MOF,MOF,,YTD,Input_Default,[NONE],[NONE],[NONE],103
    [Blank] -      
    Excluded Record Count..............4
    Blank Record Count.................1
    Total Records Bypassed.............5
    Valid Records......................0
    Total Records Processed............5
    Begin SQL Insert Load Process (0): [2011-08-29 16:19:56]
    Processing Complete... [2011-08-29 16:19:56]
    Please help me solve the issue.
    Regards,
    Sudhir Sinha

  • Bulk load in OIM 11g enabled with LDAP sync

    Have anyone performed bulk load of more than 100,000 users using bulk load utility in OIM 11g ?
    The challenge here is we have OIM 11.1.1.5.0 environment enabled with LDAP sync.
    We are trying to figure out some performance factors and best way to achieve our requirement
    1.Have you performed any timings around use of Bulk Load tool. Any idea how long will it take to LDAP sync more than 100,000 users into OID. What are the problems that we could encounter during this flow ?
    2.Is it possible we could migrate users into another environment and then swap this database for the OIM database? Also is there any effective way to load into OID directly ?
    3.We also have some custom Scheduled Task to modify couple of user attributes (using update API) from the flat file. Have you guys tried such scenario after the bulk load ? And did you face any problem while doing so ?
    Thanks
    DK

    to Update a UDF you must assign a copy value adpter in Lookup.USR_PROCESS_TRIGGERS（design console / lookup definition）
    eg.
    CODE --------------------------DECODE
    USR_UDF_MYATTR1----- Change MYATTR1
    USR_UDF_MYATTR2----- Change MYATTR2
    Edited by: Lighting Cui on 2011-8-3 上午12:25

  • Bulk loading in 11.1.0.6

    Hi,
    I'm using bulk load to load about 200 million triples into one model in 11.1.0.6. The data is splitted into about 60 files with around 3 millions triples in each file. I have a script file which has
    host sqlldr ...FILE1;
    exec sem_apis.bulk_load_from_staging_table(...);
    host sqlldr ...FILE2;
    exec sem_apis.bulk_load_from_staging_table(...);
    for every file to load.
    When I run the script from command line, it looks that the time needed for the loading grows as more files are loaded. The first file took about 8 min to load, the second file took about 25 min,... It's now taking 2 and half hour to load one file after completing loading 14 files.
    Is index rebuild causing this behavior? If that's the case is there any way to turn off the index during bulk loading? If the index rebuild is not the case what other parameters can we adjust to speed up the bulk loading?
    Thanks,
    Weihua

    Bulk-append is slower than bulk-load because of incremental index maintenance. The uniqueness constraint enforcing index cannot be disabled. I'd suggest moving to 11.1.0.7 and then installing patch 7600122 to be able to make use of enhanced bulk-append that performs much better than in 11.1.0.6.
    The best way to load 200 million rows in 11.1.0.6 would be to load into an empty RDF model via a single bulk-load. You can do it as follows (assuming the filenames are f1.nt thru f60.nt):
    - [create a named pipe] mkfifo named_pipe.nt
    - cat f*.nt > named_pipe.nt
    on a different window:
    - run sqlldr with named_pipe.nt as the data file to load all 200 million rows into a staging table (you could create staging table with COMPRESS option to keep the size down)
    - next, run exec sem_apis.bulk_load_from_staging_table(...);
    (I'd also suggest use of COMPRESS for the application table.)

  • OIM 11g R2: Bulk load utility

    Hi all,
    I'm going to import users data to OIM 11g R2 using bulk load utility. My question is: does bulk load utility support user defined fileds (UDFs)?
    Reading the documentation I don't find any reference about UDFs or UDFs limitation, but I would be aware of any your experience before starting.
    Thank for support,
    Daniele

    It should support. Bulk load loads the data directly into database table using sql loader. So as long as you have UDF column in USR table and you have specified it in csv file, i believe it should work.

  • OIM 11g - Issue with Bulk Load Utility for Account Data

    Hi,
    We are trying to load the account data for users in OIM 11g using bulk load utility.
    We are trying to load the account data for resource "iPlanet". For testing purpose, we made one account entry in csv file and run the bulk load utility. After the bulk load process completes, we have noticed that resource is provisioned to the user multiple times and multiple entries have been created in process form table.
    We have tried to run the utility multiple times with a different user record each time.
    The out put of the below sql query:
    SELECT MSG FROM OIM_BLKLD_LOG
    WHERE MODULE = 'ACCOUNT' AND LOG_LEVEL = 'PROGRESS_MSG'
    ORDER BY MSG_SEQ_NO;
    is coming as follows:
    MSG
    Number of Records Loaded: 126
    Number of Records Loaded: 252
    Number of Records Loaded: 504
    Number of Records Loaded: 1008
    Number of Records Loaded: 2016
    Number of Records Loaded: 4032
    We have noticed that each time the number of records loaded is increased to double from the records loaded in last run even when the csv file contains only one record.
    Provided below are the parent and child csv file entries.
    Parent file:
    UD_IPNT_USR_USERID,UD_IPNT_USR_FIRST_NAME,UD_IPNT_USR_LAST_NAME,UD_IPNT_USR_COMMON_NAME,UD_IPNT_USR_NSUNIQUEID
    KPETER,Peter,Kevin,Peter Kevin,
    Child file 1:
    UD_IPNT_USR_USERID,UD_IPNT_GRP_GROUP_NAME
    KPETER,group1
    Child file 2:
    UD_IPNT_USR_USERID,UD_IPNT_ROL_ROLE_NAME
    KPETER,role1
    Can you please throw some insight on what could be the potential cause for this issue and how it could be resolved?
    Thanks
    Deepa
    Edited by: user10955790 on Jun 25, 2012 6:45 AM

    Hi Deepa,
    I know from 'User load' perspective that is required to restart Oracle Identity Manager when we need to reload data that was not loaded during the first run.
    So, my suggestion is restart it before reload.
    Reference: http://docs.oracle.com/cd/E21764_01/doc.1111/e14309/bulkload.htm#CHDEICEH
    I hope this helps,
    Thiago Leoncio.

  • Sample md.properties files for bulk loader

    Hi,
    I wanted to use bulk loader to load the content into BEA repository.
    Can some one paste the sample dir.md.properties file and content properties file
    please?
    greatly appreciate your help!!
    Regards,
    Subba

    Alex,
    Thanks for your help!!
    Regards,
    Subba
    "alex toussaint" <[email protected]> wrote:
    >
    >
    >
    >
    Hi Subba,
    You can find an example of the "dir.md.properties" file at:
    <install_dir>\weblogic81\portal\db\data\sample\cm_data\Ads
    The content for this "dir.md.properties" is just:
    nodeType=ad
    Regards,
    --alex
    "subba" <[email protected]> wrote:
    Hi,
    I wanted to use bulk loader to load the content into BEA repository.
    Can some one paste the sample dir.md.properties file and content properties
    file
    please?
    greatly appreciate your help!!
    Regards,
    Subba

  • Error while running bulk load utility for account data with CSV file

    Hi All,
    I'm trying to run the bulk load utility for account data using CSV but i'm getting following error...
    ERROR ==> The number of CSV files provided as input does not match with the number of account tables.
    Thanks in advance........

    Please check your child table.
    http://docs.oracle.com/cd/E28389_01/doc.1111/e14309/bulkload.htm#CHDCGGDA
    -kuldeep

  • Bulk Insert Task Cannot bulk load because the file could not be opened.operating system error error code 3(The system cannot find the path specified.)

    Following error i am getting after i chnaged the Path in Config File from
    \\vs01\d$\\Deployment\Files\temp.txt
    to
    C:\Deployment\Files\temp.txt
    [Bulk Insert Task] Error: An error occurred with the following error message: "Cannot bulk load because the file "C:\Deployment\Files\temp.txt" could not be opened. Operating system error code 3(The system cannot find the path specified.).". 

    I think i know whats going on. The Bulk Insert task runs by executing sql command (bulk insert) internally from the target sql server to load the file. This means that the SQL Server Agent of the target sql server should have permissions on the file you trying to load. This also means that you need to use UNC path instead to specify the file path (if the target server in on different machine)
    Also from BOL (see section Usage Considerations - last bullet point)
    http://msdn.microsoft.com/en-us/library/ms141239.aspx
    * Only members of the sysadmin fixed server role can run a package that contains a Bulk Insert task.
    Make sure you take care of this as well.
    HTH
    ~Mukti
    Mukti

  • Using API  to run Catalog Bulk Load - Items & Price Lists concurrent prog

    Hi everyone. I want to be able to run the concurrent program "Catalog Bulk Load - Items & Price Lists" for iProcurement. I have been able to run concurrent programs in the past using the fnd_request.submit_request API. But I seem to be having problems with the item loading concurrent program. for one thing, the program is stuck on phase code P (pending) status.
    When I run the same concurrent program using the iProcurement Administration page it runs ok.
    Has anyone been able to run this program through the backend? If so, any help is appreciated.
    Thanks

    Hello S.P,
    Basically this is what I am trying to achieve.
    1. Create a staging table. The columns available for it are category_name, item_number, item_description, supplier, supplier_site, price, uom and currency.
    So basically the user can load item details into the database from an excel sheet.
    2. use the utl_file api, create an xml file called item_load.xml using the data in the staging table. this will create the xml file used to load items in iprocurement and save it in the database directory /var/tmp/iprocurement This part works great.
    3. use the api fnd_request.submit_request to submit the concurrent program 'Catalog Bulk Load - Items & Price Lists'. This is where I am stuck. The process simply says pending or comes up with an error saying:
    oracle.apps.fnd.cp.request.FileAccessException: File /var/tmp/iprocurement is not accessable from node/machine moon1.oando-plc.com.
    I'm wondering if anyone has used my approach to load items before and if so, have they been successful?
    Thank you

Maybe you are looking for

  • OS X kernel logs problem when USB flash drive connected.

    Previously, my Creative Nomad Muvo TX (MP3 player/1GB USB memory stick) worked fine with my Intel Mac mini (10.4.8) until the latest EFI 1.1 update. Now the USB drive does not mount or appear in finder. It is visible in the System Profiler in the USB

  • Mobileme gallery widget no albums

    Please can you help ?? Dragging the MobilemeWidget icon in Iweb page doesn't give access to any of my Gallery ALbums. The window stays grey and says " no albums or films " ! The Gallery Albums are public without anu pasword.

  • Changed ordering of Messages in IOS 8

    I am trying to solve the following problem with how messages appear in IOS 8.  Here is the scenario: Say that Mark texts me at 8, Steve texts me at 9 and Kurt texts me at 10.  In both IOS 7 and 8 the Messages list will look like this: 10 AM  Kurt 9 A

  • Can't create a new mail account

    Hi everybody, My internet provider changed it's name from direcway.com to hughes.net, so that ment that I had to change my email account. I deleted the old direcway.com address, now I'm trying to make a new hughes.net account. I click on mail and the

  • Resizing question for importing photos to ipod

    hi i was wondering if the ipod resizes images when i import them. i used to resize them manually (in photoshop) for 720x480 before i imported onto the ipod through itunes. now i have several hundred i want to load and they are 2272 x 1704 pixels and