Error : Validity of certificate (...) PSE SSL ends in 1 day
Dear all,
I have a certificate problem with my WAS system.
<u>"Validity of certificate from list with PSE type >SSL Client (Standard)< ends in 1 day, for more information, see the SAP System Log (transaction SM21)"
</u>
==> I have a BSP website https://services.aquasambre.be/service which is using a certificate valid until June 14th 2006.
==> I go through transaction SM21, but there is no further information.
==> I go through transaction <b>STRUST</b>,
<b>> PSE System </b>
--> Red cross for "SNC (SAOCryptolib)
<b>> SSL Server</b>
--> Green (ok) but fields "begin/end of validity" are empty
<b>> SSL Client anonymous</b>
--> Green (ok) but fields "begin/end of validity" are empty
<b>> SSL Client standard</b>
--> Green (ok) but fields "begin/end of validity" are empty
==> I go through the amazing SAP documentation... "I'm a bit lost"
... Maybe have you already encountered this kind of problem... do you have an advice for me ?
Nico
PS : My problem occurs after installation of support packages.
PPS : Why are they all on holiday ??? ;o)
I have found where the cerficate fails :
using program SSF_ALERT_CERTEXPIRE -->
Client SSL (standard) SSLC DFAULT
Certificat personnel
CN=Client, OU=I0020211069, OU=SAP Web AS, O=SAP Trust Community, C=BE 01.01.2038
Liste des certificats (Lste Certif.)
1 = CN=extn12.nrb.be, OU=I0020211069, OU=SAP Web AS, O=SAP Trust Community, C=D 01.01.2038
<u> 2 = EMAIL=[email protected], CN=vdeler, OU=nrb logiciels, O=nrb logiciels, L=hers <b>18.08.2005</b></u>
<i>I can have the same information using STRUST. </i>
So if I go through OSS note 499386, the solution seems to be "generate a new PSE (with the same name) and resend a certificate request to SAP"
--> Could someone tell me how I can send a request to SAP to renew the concerned certificate ?
Similar Messages
-
Error: Validity of Certificate from list with PSE type PSE ends in 3 da
Hello,
our system is reporting the followin warning
Error: Validity of Certificate from list with PSE type > PSE < ends in 1 days, more notes on system log (SM21)
We check the transaction STRUST and STRUSTSSO2, the certificate between ERP and EP expires today. The ERP system is SAP R/3 Enterprise and EP release is 6.20
Please how can we create the certificate in that releases of SAP ERP and EP, we only found information about this procedure in the newest releases.
ThanksHi
Is the SAP Logon certifiacte goiogn to expire??From Portal to ERP??
If this is PSE then follow this [Link.|http://help.sap.com/saphelp_nw2004s/helpdata/EN/a6/f19a3dc0d82453e10000000a114084/frameset.htm]
Regards
Ajay -
Order Import - Validation failed for the field - End Customer Location
I am trying to import an order using standard import program and it is failing with below error:
- Validation failed for the field - End Customer Location
I have checked metalink to debug this and found nothing, the values i have used to populate the interface table or valid.
Can someone please post your views on this, on where the problem might be.
Thanks!Hello,
Try the following
1) Check if any processing constraints are applied to customer/location
2) Try to create a new customer and associate internal location.
Create a new order to reproduce the issue
Thanks
-Arif -
Hello,
I have configured BizTalk Services Hybrid Connection between Standard Azure Website and SQL Server 2014 on premise.
Azure Management portal shows the status of Hybrid Connection as established.
However, the website throws an error when trying to open a connection
<
addname="DefaultConnection"
connectionString="Data
Source=machine name;initial catalog=AdventureWorks2012;Uid=demouser;Password=[my password];MultipleActiveResultSets=True"
providerName="System.Data.SqlClient"
/>
(The same website, with the same connection string deployed on SQL Server machine works correctly).
I tried various options with the connections sting (IP address instead of machine name, Trusted_Connection=False, Encrypt=False, etc. the result is the same
[Win32Exception (0x80004005): The certificate chain was issued by an authority that is not trusted]
[SqlException (0x80131904): A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.
I tried various machines - on premise and a clean Azure VM with SQL Server and it results in the same error - below full stack
The certificate chain was issued by an authority that is not trusted
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.ComponentModel.Win32Exception: The certificate chain was issued by an authority that is not trusted
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[Win32Exception (0x80004005): The certificate chain was issued by an authority that is not trusted]
[SqlException (0x80131904): A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) +5341687
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) +546
System.Data.SqlClient.TdsParserStateObject.SNIWritePacket(SNIHandle handle, SNIPacket packet, UInt32& sniError, Boolean canAccumulate, Boolean callerHasConnectionLock) +5348371
System.Data.SqlClient.TdsParserStateObject.WriteSni(Boolean canAccumulate) +91
System.Data.SqlClient.TdsParserStateObject.WritePacket(Byte flushMode, Boolean canAccumulate) +331
System.Data.SqlClient.TdsParser.TdsLogin(SqlLogin rec, FeatureExtension requestedFeatures, SessionData recoverySessionData) +2109
System.Data.SqlClient.SqlInternalConnectionTds.Login(ServerInfo server, TimeoutTimer timeout, String newPassword, SecureString newSecurePassword) +347
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover) +238
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer timeout) +892
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance) +311
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString userConnectionOptions, SessionData reconnectSessionData) +646
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions) +278
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool pool, DbConnection owningObject, DbConnectionOptions options, DbConnectionPoolKey poolKey, DbConnectionOptions userOptions) +38
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection) +732
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection) +85
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection) +1057
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection) +78
System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection) +196
System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) +146
System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) +16
System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry) +94
System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry) +110
System.Data.SqlClient.SqlConnection.Open() +96
System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) +44
[EntityException: The underlying provider failed on Open.]
System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) +203
System.Data.EntityClient.EntityConnection.Open() +104
System.Data.Objects.ObjectContext.EnsureConnection() +75
System.Data.Objects.ObjectQuery`1.GetResults(Nullable`1 forMergeOption) +41
System.Data.Objects.ObjectQuery`1.System.Collections.Generic.IEnumerable<T>.GetEnumerator() +36
System.Collections.Generic.List`1..ctor(IEnumerable`1 collection) +369
System.Linq.Enumerable.ToList(IEnumerable`1 source) +58
CloudShop.Services.ProductsRepository.GetProducts() +216
CloudShop.Controllers.HomeController.Search(String SearchCriteria) +81
CloudShop.Controllers.HomeController.Index() +1130
lambda_method(Closure , ControllerBase , Object[] ) +62
System.Web.Mvc.ActionMethodDispatcher.Execute(ControllerBase controller, Object[] parameters) +14
System.Web.Mvc.ReflectedActionDescriptor.Execute(ControllerContext controllerContext, IDictionary`2 parameters) +193
System.Web.Mvc.ControllerActionInvoker.InvokeActionMethod(ControllerContext controllerContext, ActionDescriptor actionDescriptor, IDictionary`2 parameters) +27
System.Web.Mvc.Async.<>c__DisplayClass42.<BeginInvokeSynchronousActionMethod>b__41() +28
System.Web.Mvc.Async.<>c__DisplayClass8`1.<BeginSynchronous>b__7(IAsyncResult _) +10
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeActionMethod(IAsyncResult asyncResult) +32
System.Web.Mvc.Async.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33() +58
System.Web.Mvc.Async.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49() +225
System.Web.Mvc.Async.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult) +10
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeActionMethodWithFilters(IAsyncResult asyncResult) +34
System.Web.Mvc.Async.<>c__DisplayClass2a.<BeginInvokeAction>b__20() +23
System.Web.Mvc.Async.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult) +99
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeAction(IAsyncResult asyncResult) +27
System.Web.Mvc.<>c__DisplayClass1d.<BeginExecuteCore>b__18(IAsyncResult asyncResult) +14
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult) +39
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.Controller.EndExecute(IAsyncResult asyncResult) +29
System.Web.Mvc.Controller.System.Web.Mvc.Async.IAsyncController.EndExecute(IAsyncResult asyncResult) +10
System.Web.Mvc.<>c__DisplayClass8.<BeginProcessRequest>b__3(IAsyncResult asyncResult) +25
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.MvcHandler.EndProcessRequest(IAsyncResult asyncResult) +31
System.Web.Mvc.MvcHandler.System.Web.IHttpAsyncHandler.EndProcessRequest(IAsyncResult result) +9
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +9651188
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.36213
Regards,
Michal
Michal MorciniecSame issue here, looking for more information !
-
SSL ERROR : The required certificate was not found
I am using Adobe Javascript this.submitForm to submit FDF. This works fine in Windows. When the same pdf is opened in a Linux environment I get the following error:
SSL ERROR : The required certificate was not found
and am required to run acroread -installCertificate.
This I do and it succeeds but the SSL error persists.
The this.submitForm command is given below:
/this.submitForm({cURL: 'https://some-webpath/FILE.cgi#FDF',bFDF: true,bGet: false});
When reading the documentation for the submitForm I see that the Acrobat Web Capture plug-in should be installed: I notice this is the case in Windows but not in Linux. Where can I get this?Hi Ben,
The behavior you have noticed with the newly installed certificate files in
[home-folder]/.adobe/Acrobat/[version]/Cert folder
and the
[install-folder]/Adobe/Reader8/Reader/Cert/curl-ca-bundle.crt file is correct. Further, the behavior has not changed between Reader versions 8.x and 9.x
It is possible that the problem may be of the installed certificate not linking up to one of the Root CA-s. An Intermedia-CA certificate may be needed to be installed.
Could you mail me at " sanath at adobe dot com ", if possible, with more information about the problem (the PDF, the certificate in question - the file named like 123456.0 ), so that we at Adobe can work on resolving your problem
Regards
Sandip -
I have a problem, i can't generate with DPS App Builder "App distribuzione.zip" to be sent to Apple to publish APP, this is the error message: is not a valid distribution certificate Apple. What do I do?
As Bern510 says, you'll need to recreate certificates that are valid. I suggest following our step-by-step publishing guide, which walks through how to obtain certificates correctly.
http://help.adobe.com/en_US/ppcompdoc/Step_by_step_guide_to_dps_se.pdf
Neil -
Validity of System PSE ends in 2 days - How to stop these warnings?
Hi
We are getting following warning in our R/3 System-4.7 (Web AS 620 on Windows with Oracle - Kernel 640)
SAPSYS - Validate of Certificate from list with PSE type > System PSE > ends in
2 days, for more information, see the SAP System log (transaction
SM21)
I am aware that our Portal logon ticket (SSO) certificate is expiring in 2 days. In order to stop these warnings, I deleted the Portal PSE certificates in the R/3 System, but these warnings still appearing when we log in to R/3 system.
I am in the process creating new certificate in Portal and import the same to R/3. But, in the meanwhile how do I stop these warnings in the R/3 System? It looks like it cached some where.
Your directions/help in this regard would be highly appreciated.
Regards
ChanduResolved by myself by deleting the old certificate and also deleting the messages in SM02. It's surprising to see that messages created by the system in SM02.
Regards
Chandu -
Import a valid Server Certificate as a trustStore.?
How do I import a valid server certificate as a trustStore and put
this in jre/lib/security.
I have a Java class that needs to connect to a valid HTTPS Server
having a certificate issued by a CA.
Now,I have a Java client that connects to this server,and sends and
receives data.
I will need to import the server certificate into the jre/lib/security
directory?
I guess we need to do this so that the client accepts the server's
certificate
Has anyone understood my question?
Attached is my java class:
public class HttpsSender
String sURL = "SomeServerAddress";
public static String ec(String sMess)
String response=null;
try {
Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider());
System.setProperty("java.protocol.handler.pkgs","com.sun.net.ssl.internal.www.protocol");
/* Temporarily testing on Tomcat and hence the Context:A_SYMBIAN_SERVLET */
URL url;
String uri = "https://" + sURL
url = new URL(uri);
HttpsURLConnection hpCon= (HttpsURLConnection)url.openConnection();
hpCon.setRequestMethod("POST");
hpCon.setDoOutput(true);
hpCon.setDoInput(true);
/** Transfer Data over https */
DataOutputStream dos = new DataOutputStream(hpCon.getOutputStream());
dos.writeUTF(sMess);
/* Response from the Receiving Servlet.*/
DataInputStream dis = new DataInputStream(hpCon.getInputStream());
try {
response = dis.readUTF();
}finally
dos.close();
dis.close();
}catch(IOException e)
System.out.println("Error in Client " + e);
return response;
} // End of Method Encrypt.You can import a valid server certificate into a Store with the keytool!
Good link:
http://forum.java.sun.com/thread.jsp?forum=2&thread=4240
You must provide to the Java-VM where it can find the TrustStore:
-> on command line:
java -Djavax.net.ssl.trustStore=XXX/jssesamples/samplecacerts
For Testing the Debug Output can be usefull! Enable with:
java -Djavax.net.debug=handshake,ssl
-> in source code:
System.setProperty("javax.net.ssl.trustStore",STORE_FILE);
System.setProperty("javax.net.ssl.trustStorePassword",STORE_PASS); -
Adobe Air error message when using PSE 10
When I try using the tips in PSE 10 I get an error message from Adobe Air stating that it is damaged. Have tried uninstalling and re-installing, but that hasn't helped. I have windows 7
Okay Jeff, this is as far as I have gotten so far. I'm using Air version 3.2.0.2070. This is the install log.
Runtime Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -silent -eulaAccepted -programMenu AdobeHelp.air
Installed runtime (2.6.0.19120) located at C:\Program Files (x86)\Common Files\Adobe AIR
Invoking Application Installer for combined install
Launching subprocess with commandline C:\Users\Vette\AppData\Local\Temp\AIRD0CE.tmp\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\Vette\AppData\Local\Temp\AIRD0CE.tmp -silent -withRuntime -url -programMenu -eulaAccepted file:///E:/Adobe%20Photoshop%20Elements%2010/ElementsSTIInstaller/payloads/AdobeHelp/Adob eHelp.air
Application Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -runtime C:\Users\Vette\AppData\Local\Temp\AIRD0CE.tmp -silent -withRuntime -url -programMenu -eulaAccepted file:///E:/Adobe%20Photoshop%20Elements%2010/ElementsSTIInstaller/payloads/AdobeHelp/Adob eHelp.air
Installed runtime (2.6.0.19120) located at C:\Program Files (x86)\Common Files\Adobe AIR
Unpackaging file:///E:/Adobe%20Photoshop%20Elements%2010/ElementsSTIInstaller/payloads/AdobeHelp/Adob eHelp.air to C:\Users\Vette\AppData\Local\Temp\flaE4EA.tmp
Application signature verified
Unpackaging/validation complete
No app located for appID 'chc' and pubID '4875E02D9FB21EE389F73B8D1702B320485DF8CE.1'
Converting unpackaged application to a native installation package in C:\Users\Vette\AppData\Local\Temp\fla71A.tmp
Native installation package creation succeeded
Starting silent combined runtime update and app install.
Updating runtime from version 2.6.0.19120 to version 2.6.0.19140.
Installing app chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 version 3.5.23 to C:\Program Files (x86)\Adobe using the source file at file:///E:/Adobe%20Photoshop%20Elements%2010/ElementsSTIInstaller/payloads/AdobeHelp/Adob eHelp.air
Reinstalling C:\Users\Vette\AppData\Local\Temp\AIRD0CE.tmp\setup.msi
Installing msi at C:\Users\Vette\AppData\Local\Temp\fla71A.tmp\setup.msi with guid {BD7F1DA3-5EA0-65F8-52B0-5E103FDC045A}
Application Installer end with exit code 0
Subprocess app installer succeeded
Runtime Installer end with exit code 0
Runtime Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -silent "E:\Adobe Photoshop Elements 10\AdobePhotoshopDotcomInspirationBrowser.air"
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Invoking Application Installer for combined install
Launching subprocess with commandline C:\Users\Vette\AppData\Local\Temp\AIR4EA4.tmp\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\Vette\AppData\Local\Temp\AIR4EA4.tmp -silent -withRuntime -url file:///E:/Adobe%20Photoshop%20Elements%2010/AdobePhotoshopDotcomInspirationBrowser.air
Application Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -runtime C:\Users\Vette\AppData\Local\Temp\AIR4EA4.tmp -silent -withRuntime -url file:///E:/Adobe%20Photoshop%20Elements%2010/AdobePhotoshopDotcomInspirationBrowser.air
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Unpackaging file:///E:/Adobe%20Photoshop%20Elements%2010/AdobePhotoshopDotcomInspirationBrowser.air to C:\Users\Vette\AppData\Local\Temp\fla634C.tmp
Application signature verified
Unpackaging/validation complete
No app located for appID 'PhotoshopdotcomInspirationBrowser' and pubID '4C35C4D325D350FE0114230CBADCA2DDD0AC8D25.1'
Converting unpackaged application to a native installation package in C:\Users\Vette\AppData\Local\Temp\fla7325.tmp
Native installation package creation succeeded
Starting silent app installation to C:\Program Files (x86)\Adobe. Installing app PhotoshopdotcomInspirationBrowser.4C35C4D325D350FE0114230CBADCA2DDD0AC8D25.1 version 3.07 using the source file at file:///E:/Adobe%20Photoshop%20Elements%2010/AdobePhotoshopDotcomInspirationBrowser.air
Installing msi at C:\Users\Vette\AppData\Local\Temp\fla7325.tmp\setup.msi with guid {4C184855-B85A-6873-C642-60A58682E721}
Application Installer end with exit code 0
Subprocess app installer succeeded
Runtime Installer end with exit code 0
Launching subprocess with commandline C:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -updatecheck
Runtime Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -updatecheck
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/2.6.0.19140/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/2.6.0.19140/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Unpackaging complete
Download success
Runtime updated downloaded
User has selected immediate install of the update
Starting runtime background update installation
Launching subprocess with commandline C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background\updater -update
Runtime updater successfully launched
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
Commandline is: -update
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Relaunching with elevation
Launching subprocess with commandline c:\users\vette\appdata\local\temp\airafa3.tmp\adobe air installer.exe -ei
Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_704_0 -ei
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Starting silent runtime update. Updating runtime from version 2.6.0.19140 to version 3.1.0.4880
Installing msi at c:\users\vette\appdata\local\temp\airafa3.tmp\setup.msi with guid {FE23D063-934D-4829-A0D8-00634CE79B4A}
Runtime Installer end with exit code 0
Elevated install completed
Runtime Installer end with exit code 0
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -updatecheck
Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
Commandline is: -updatecheck
Installed runtime (3.1.0.4880) located at c:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Clearing unused background update directory
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.1.0.4880/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.1.0.4880/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Runtime update not available
Unpackaging cancelled
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
Commandline is: -arp:uninstall
Installed runtime (3.1.0.4880) located at c:\Program Files (x86)\Common Files\Adobe AIR
Runtime Installer end with exit code 6
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is:
Installed runtime (3.1.0.4880) located at c:\Program Files (x86)\Common Files\Adobe AIR
Relaunching with elevation
Launching subprocess with commandline c:\users\vette\appdata\local\temp\aire7af.tmp\adobe air installer.exe -ei
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_4784_0 -ei
Installed runtime (3.1.0.4880) located at c:\Program Files (x86)\Common Files\Adobe AIR
Starting silent runtime update. Updating runtime from version 3.1.0.4880 to version 3.2.0.2070
Installing msi at c:\users\vette\appdata\local\temp\aire7af.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Runtime Installer end with exit code 0
Elevated install completed
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -installupdatecheck
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Runtime update not available
Unpackaging cancelled
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -arp:uninstall
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Relaunching with elevation
Launching subprocess with commandline c:\program files (x86)\common files\adobe air\versions\1.0\resources\adobe air updater.exe -eu
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_3840_0 -eu
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Starting runtime uninstall. Uninstalling runtime version 3.2.0.2070
Uninstalling product with GUID {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Runtime Installer end with exit code 0
Elevated install completed
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is:
No installed runtime detected
Relaunching with elevation
Launching subprocess with commandline c:\users\vette\appdata\local\temp\airbda4.tmp\adobe air installer.exe -ei
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_764_0 -ei
No installed runtime detected
Starting silent runtime install. Installing runtime version 3.2.0.2070
Installing msi at c:\users\vette\appdata\local\temp\airbda4.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Runtime Installer end with exit code 0
Elevated install completed
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -installupdatecheck
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Runtime update not available
Unpackaging cancelled
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is:
No installed runtime detected
Relaunching with elevation
Launching subprocess with commandline c:\users\vette\appdata\local\temp\air2fa8.tmp\adobe air installer.exe -ei
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_5396_0 -ei
No installed runtime detected
Starting silent runtime install. Installing runtime version 3.2.0.2070
Installing msi at c:\users\vette\appdata\local\temp\air2fa8.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Runtime Installer end with exit code 0
Elevated install completed
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -installupdatecheck
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Runtime update not available
Unpackaging cancelled
Runtime Installer end with exit code 0
Application Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -playerVersion=11,2,202,233 -sandboxType=remote -securityDomain=airdownload.adobe.com -https=false -fromUserEvent=true -- -url http://www.adobe.com/support/chc/air/350/AdobeHelp.air -- WWW aHR0cDovL3d3dy5hZG9iZS5jb20vc3VwcG9ydC9jaGMv
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Begin air file download from http://www.adobe.com/support/chc/air/350/AdobeHelp.air
Download destination is C:\Users\Vette\AppData\Local\Temp\fla7A97.tmp
Received download status 200
Response URL is http://www.adobe.com/support/chc/air/350/AdobeHelp.air
Download success
Unpackaging file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp to C:\Users\Vette\AppData\Local\Temp\flaB22B.tmp
Application signature verified
Unpackaging/validation complete
No app located for appID 'chc' and pubID '4875E02D9FB21EE389F73B8D1702B320485DF8CE.1'
Converting unpackaged application to a native installation package in C:\Users\Vette\AppData\Local\Temp\flaC7B.tmp
Native installation package creation succeeded
Starting app installation to C:\Program Files (x86)\Adobe. Installing app chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 version 3.5.23 using the source file at file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp
Got an unexpected fatal error while in stateInstalling: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception Error: Directory can't be written to" errorID=5006]
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime "c:\Program Files (x86)\Common Files" -silent -logToStdout -url -location "C:\Program Files (x86)\Adobe" -desktopShortcut -programMenu file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp
Relaunching with elevation
Application Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_4952_0 -runtime "c:\Program Files (x86)\Common Files" -silent -logToStdout -url -location "C:\Program Files (x86)\Adobe" -desktopShortcut -programMenu file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Unpackaging file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp to C:\Users\Vette\AppData\Local\Temp\fla3260.tmp
Application signature verified
Unpackaging/validation complete
No app located for appID 'chc' and pubID '4875E02D9FB21EE389F73B8D1702B320485DF8CE.1'
Converting unpackaged application to a native installation package in C:\Users\Vette\AppData\Local\Temp\fla3BF3.tmp
Native installation package creation succeeded
Starting silent app installation to C:\Program Files (x86)\Adobe. Installing app chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 version 3.5.23 using the source file at file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp
Installing msi at C:\Users\Vette\AppData\Local\Temp\fla3BF3.tmp\setup.msi with guid {BD7F1DA3-5EA0-65F8-52B0-5E103FDC045A}
Application Installer end with exit code 0
Elevated install completed
Launching subprocess with commandline C:\Program Files (x86)\Adobe\Adobe Help\Adobe Help.exe
Application Installer end with exit code 0
Date: Thu, 12 Apr 2012 17:10:46 -0600
From: [email protected]
To: [email protected]
Subject: Adobe Air error message when using PSE 10
Re: Adobe Air error message when using PSE 10
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Vetteski65 I would recommend reviewing Troubleshoot AIR installation | Windows - http://helpx.adobe.com/air/kb/troubleshoot-air-installation-windows.ht ml for steps on how to resolve your difficulties. Please feel free to respond to this thread if you have any questions about the steps listed within the document. If you could also respond with the specific error message you receive it would be appreciated.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4331328#4331328
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4331328#4331328. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
The enrollment server did not provision a valid identity certificate
I'm working on rolling my own MDM service, and I'm trying to combine the SCEP and MDM payloads as the MDM protocol document from Apple suggests. I created my own SCEP web service in C# .Net and I know that the device can get a valid certificate when I just send the SCEP payload. However when I also include an MDM payload that points to the SCEP payload's UUID via the IdentityCertificateUUID key, I get the following error, "The enrollment server did not provision a valid identity certificate." This configuration is the one that is sent after the user chooses to install the initial enrollment configuration (step 1 of phase 2 in this diagram).
The device doesn't appear to even make an attempt at connecting to my server, and thanks to server side logging I know that it never reaches my SCEP web service page. This seems to indicate that there's something wrong with the certificate I use to sign the payload. I've separately tried signing it with my SSL certificate (from a pre trusted root authority), my customer MDM push certificate (chained from our vendor cert), and my self-signed root certificate authority certificate (created via makecert.exe) that the SCEP service uses to issue new certificates (i.e. device identity certificates).
I've looked at the output from the iPCU (iPhone Configuration Utility) when I create a profile with both the MDM and SCEP payloads, and it isn't a valid profile (I've even tried copying it nearly wholesale). However when I install the profile via the iPCU the error doesn't come up and it begins the SCEP enrollment process without issue.
A side note - using a preexisting MDM vendor is not an option here.
Below is the profile I'm using:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>PayloadContent</key>
<array>
<dict>
<key>PayloadContent</key>
<dict>
<key>Challenge</key>
<string>this is a challenge</string>
<key>Key Type</key>
<string>RSA</string>
<key>Key Usage</key>
<integer>5</integer>
<key>Keysize</key>
<integer>1024</integer>
<key>Name</key>
<string>mycompany</string>
<key>Retries</key>
<integer>3</integer>
<key>RetryDelay</key>
<integer>0</integer>
<key>Subject</key>
<array><array><array>
<string>CN</string>
<string>mycompany</string>
</array></array></array>
<key>URL</key>
<string>https://mysite.com/scep.aspx</string>
</dict>
<key>PayloadDescription</key>
<string>Configures SCEP</string>
<key>PayloadDisplayName</key>
<string>SCEP (mycompany)</string>
<key>PayloadIdentifier</key>
<string>com.mycompany.mdm.scep1</string>
<key>PayloadOrganization</key>
<string></string>
<key>PayloadType</key>
<string>com.apple.security.scep</string>
<key>PayloadUUID</key>
<string>57225d3d-0758-4d23-8093-e4d8c9bbd47c</string>
<key>PayloadVersion</key>
<integer>1</integer>
</dict>
<dict>
<key>AccessRights</key>
<integer>3</integer>
<key>CheckInURL</key>
<string>mysite.com/checkin.aspx</string>
<key>CheckOutWhenRemoved</key>
<false/>
<key>IdentityCertificateUUID</key>
<string>57225d3d-0758-4d23-8093-e4d8c9bbd47c</string>
<key>PayloadDescription</key>
<string>Configures MobileDeviceManagement.</string>
<key>PayloadIdentifier</key>
<string>com.mycompany.mdm.mdm2</string>
<key>PayloadOrganization</key>
<string></string>
<key>PayloadType</key>
<string>com.apple.mdm</string>
<key>PayloadUUID</key>
<string>ed0ae41d-1aa7-4721-9fe9-139c1072132c</string>
<key>PayloadVersion</key>
<integer>1</integer>
<key>ServerURL</key>
<string>https://mysite.com/checkin.aspx</string>
<key>SignMessage</key>
<false/>
<key>Topic</key>
<string>com.apple.mgmt.mypushsubject</string>
<key>UseDevelopmentAPNS</key>
<true/>
</dict>
</array>
<key>PayloadDescription</key>
<string>Profile description.</string>
<key>PayloadDisplayName</key>
<string>Test Profile</string>
<key>PayloadIdentifier</key>
<string>com.mycompany.mdm</string>
<key>PayloadOrganization</key>
<string>mycompany</string>
<key>PayloadRemovalDisallowed</key>
<false/>
<key>PayloadType</key>
<string>Configuration</string>
<key>PayloadUUID</key>
<string>13321058-4037-478c-9b1e-ef6f810065cb</string>
<key>PayloadVersion</key>
<integer>1</integer>
</dict>
</plist>I got in touch with Apple about this.
Apparently you want to send the combined MDM & SCEP payload in step 2 of phase 3 of the diagram I linked in my question, which is the profile that's sent after OTA enrollment. According to Apple you need two separate certificates (which means two SCEP enrollments) - one for OTA enrollment, and one for MDM enrollment. -
Windows built-in IKEv2 clients are not finding a valid machine certificate
Hi All,
I'm trying to connect windows built-in clients to a Cisco IOS IKEv2 headend. I want to use EAP to authenticate the clients with there AD credentials. For EAP, I need to use certificates so I will use self-signed certificates as I don't have a CA.
Once I have ceated a certificate for the headend, i import this on the clients Trusted Root Certification Authorities. But when I try to connect the client to the headend, I get an error message from the client "Error 13806: IKE failed to find valid machine certificate". It seems that Microsoft is having issue with the certificate.
Does anyone have an idea what I'm doing wrong?
Headend config:
aaa new-model
aaa group server radius AAA-AuthC-Group-RA
server-private v.v.v.v auth-port 1812 acct-port 1813 key secret
aaa authentication login AAA-AuthC-List-RA group AAA-AuthC-Group-RA
aaa authorization network AAA-AuthZ-List-RA local
crypto pki trustpoint PKI-TP-SS-RA
enrollment selfsigned
serial-number none
fqdn headend
ip-address none
subject-name cn=x.x.x.x
revocation-check none
rsakeypair PKI-TP-SS-RA-Key 2048
eku request server-auth
ip local pool IKEV2-POOL-RA 10.0.0.10 10.0.0.250
crypto ikev2 authorization policy IKEV2-AUTHORIZATION-POLICY-RA
pool IKEV2-POOL-RA
dns 10.0.0.1
netmask 255.255.255.0
crypto ikev2 proposal IKEV2-PROPOSAL-RA
encryption aes-cbc-256
integrity sha1
group 2
crypto ikev2 policy IKEV2-POLICY-RA
proposal IKEV2-PROPOSAL-RA
crypto ikev2 profile IKEV2-PROFILE-RA
match identity remote key-id mydomain.com
identity local dn
authentication remote eap query-identity
authentication local rsa-sig
pki trustpoint PKI-TP-SS-RA
dpd 60 2 on-demand
aaa authentication eap AAA-AuthC-List-RA
aaa authorization group eap list AAA-AuthZ-List-RA
virtual-template 10
no crypto ikev2 http-url cert
crypto ipsec profile IPSEC-PROFILE-AES-256
set transform-set IPSEC-AES-256
crypto ipsec profile IPSEC-PROFILE-AES256-SHA1
set transform-set IPSEC-AES256-SHA1
set ikev2-profile IKEV2-PROFILE-RA
interface Loopback10
ip address 10.0.0.1 255.255.255.0
interface Virtual-Template10 type tunnel
description FlexVPN-RA tunnel
bandwidth 20000
ip unnumbered Loopback10
ip mtu 1400
ip flow ingress
ip tcp adjust-mss 1360
tunnel mode ipsec ipv4
tunnel protection ipsec profile IPSEC-PROFILE-AES256-SHA1Please tell me where my Mail is getting Elementary School-isized. anyone?
Mail's Preferences do not affect what is seen at the other end, they are only for local display. To have the recipient see your desired font, you must set it individually for each message in the New Message pane (also you should make it different than what is set in the Preferences, because of a bug). Or you can use custom Stationery.
A workaround used by some is to create a signature in your desired font and begin your message in the first line of the sig.
If these options are not satisfactory, best to switch to Entourage or Thunderbird. -
OCSP Validation in Certificate-Based Authentication
Hi,
Has anybody done OCSP Validation in Certificate-Based Authentication ? If yes - then please describe how can we configure an OCSP responder for Certificate Validation?
Regards,
YKHi,
Thanx for all of ur replies :)
I am now able to do lot of stuff using Identity Server :)
My main target is to use Identity Server for certificate-based authentication by enabling OCSP validation.
First I configured Web server to enable SSL and client authentication. Then I configured Identity Server and enabled the Certificate based authentication. I edited the certificate authentication properties and enabled the OCSP validation check. I provided the OCSP responder address and corresponding CA name in AMConfig.properties.
Now I am testing this setup up as follows.
1- I try to access the default index page by following URL
https://identity-1.identity.com:58090/
2- It asks for client certificate to choose from available certificates
3- I select a certificate (issuer of this cert is configured for OCSP validation) and proceed
4- Identity Server make an OCSP request and send it to my OCSP responder
5- OCSP responder response with revocation status 'good'
6- Now I get the server certificate on browser
7- I press OK and I see the index page of Identity Server
I think it is working fine now :)
now if in step 3, I select a wrong certificate i.e. issuer of this certificate is not configured for OCSP validation then It shows the DNS Error Page. Why dont it show the proper authentication failed page of Identity Server? If I see the error log for the web server I see the following error:
[03/Jun/2003:11:18:10] failure ( 1692): Error receiving connection (unable to map error number -8062)
What does it mean ? Any ideas ?
Regards,
Yasir Khan -
Import of gmail cert errors out - [ERROR] - Failed import certificate: gmail
I am trying to use javamail to read mail from gmail. When I try to import the ssl cert from the comman line it errorsout
java -jar lib/javacloud.jar add-ssl-certificates -user user -serviceinstance serviceinstance -identitydomain identitydomain -path /Users/user/gmailssl/ssl.cer -datacenter us2 -alias gmail
[ERROR] - Failed import certificate: gmail, content: -----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
I noticed that the content within the CERT is different. Not sure if that is relevant.I am not sure what the "store.connect()" does, based on the exceptions seems to be trying to make non-https connection which based on the documentation is not supported:
Unsupported Features
Alternative
Remote invocations with a transport protocol other than HTTPS (including plain text HTTP).
Not applicable.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/ -
When I try to download the latest version of iTunes from apple.com, I get the message "Content was blocked because it was not signed by a valid security certificate."When I open iTunes and try to download the latest version there, I get the message "iTunes has an invalid signature. The download has been removed." I have also gotten an Internet Script Error stating that an error has occured in Line 0, Char O and that "Access is denied to images.apple.com/global/scripts/lib/iepngfix.htc." This problem has never occurred with earlier versions of ITunes. Anyone know how to fix this problem?
Are you downloading iTunes form an Apple website or somewhere else? If the answer is somewhere else, try downloading it from Apple. Click on iTunes in the black menu bar above and go from there.
Let us know what happens. -
A fatal error occurred while creating an SSL client credential. The internal error state is 10011.
Need help. I have my pilot lync 2013 pool up (in coexistence with 2010 production environment) and can log into Lync 2013 environment with a lync 2010 client but am not able to with a lync 2013 client. It just prompts for password but will not
take it. I'm sseeing this on my front end server multiple times:
A fatal error occurred while creating an SSL client credential. The internal error state is 10011.
Came across this http://www.logicspot.net/index.php?id=50 and tried disabling TLS 1.2, which I did and verified but yet the issue still exists.
All my certs are good coming from internal CA. My signin logs show below but keep in mind, this works just fine if using a 2010 lync client to my lync 2013 servers. Issue only occurs when trying to connect using a lync 2013 client.
1 Login: FAIL (hr = 0x1)
this request needs authentication, trying webticket from: https://domain.com/WebTicket/WebTicketService.svc
1.1 Get-NewWebTicket: FAIL (hr = 0x1)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
1.1.1 ExecuteWithMetadataInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.2 ExecuteWithWindowsOrNoAuthInternal: PASS
1.1.3 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.4 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Discovery task(0A4FF830) sent to URL http://domain.com completed with hr=0x80f10045
1.1.5 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.6 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
RichHi,
Please check the server role and Web Services for Internet Information Services (IIS) are set correctly.
For the detailed IIS configuration, please check:
http://technet.microsoft.com/en-us/library/gg412871.aspx
As Lync client 2013 attempt to query in order to perform autodiscover of the Lync registration server. First
lyncdiscoverinternal.<sipdomain> Host (A) record and then
lyncdiscover.<sipdomain> Host (A) record. If neither of these records are resolvable then the legacy DNS SRV and A record fall-back process is used. So make sure you have add the two A record in DNS server.
More details:
http://blog.schertz.name/2012/12/lync-2013-client-autodiscover/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support
Maybe you are looking for
-
Issue with downloading podcast
I have subscribed to podcast and it downloaded all but 10 episodes. so when i go to get the latest podcast it downloads them but when it is done download it acts as if it has not downloaded and tells me to download agian. Has anyone else seen this is
-
Help me to send an email throught jsf....
Hi guys, i've developed a jsf application using jsf 1.1.0.1 , servlet 2.3 and tomcat 5.5 embedded with eclipse. I've a question for you and i'm not able to solve it,excuse my inexperience. I've in my menu a password request commandlink,user select it
-
Fairly often when I open Firefox, it continues to open multiple windows (hundreds of them) without my request. The only way I can stop it is to reboot the computer. == This happened == A few times a week == Several weeks ago
-
How to install the last version 7.0.1 over the existing 5.0 version of my Linux netbook?
I downloaded the Firefox version 7.0.1 for Linux and unzipped it. I couldn't open the file run-mozilla.sh Maybe I should open another file from the package?
-
Problem WLC - LDAP windows server 2008
Hello People I'm having a problem with a WLC 5508 and a LDAP on windows server 2008, I already config everything on the WLC, but when a user try to authenticate I have this debug result: *aaaQueueReader: Jul 15 19:27:07.384: 00:1b:77:7b:19:aa Returni