Windows built-in IKEv2 clients are not finding a valid machine certificate

Hi All,
I'm trying to connect windows built-in clients to a Cisco IOS IKEv2 headend. I want to use EAP to authenticate the clients with there AD credentials. For EAP, I need to use certificates so I will use self-signed certificates as I don't have a CA.
Once I have ceated a certificate for the headend, i import this on the clients Trusted Root Certification Authorities. But when I try to connect the client to the headend, I get an error message from the client "Error 13806: IKE failed to find valid machine certificate". It seems that Microsoft is having issue with the certificate.
Does anyone have an idea what I'm doing wrong?
Headend config:
aaa new-model
aaa group server radius AAA-AuthC-Group-RA
server-private v.v.v.v auth-port 1812 acct-port 1813 key secret
aaa authentication login AAA-AuthC-List-RA group AAA-AuthC-Group-RA
aaa authorization network AAA-AuthZ-List-RA local
crypto pki trustpoint PKI-TP-SS-RA
enrollment selfsigned
serial-number none
fqdn headend
ip-address none
subject-name cn=x.x.x.x
revocation-check none
rsakeypair PKI-TP-SS-RA-Key 2048
eku request server-auth
ip local pool IKEV2-POOL-RA 10.0.0.10 10.0.0.250
crypto ikev2 authorization policy IKEV2-AUTHORIZATION-POLICY-RA
pool IKEV2-POOL-RA
dns 10.0.0.1
netmask 255.255.255.0
crypto ikev2 proposal IKEV2-PROPOSAL-RA
encryption aes-cbc-256
integrity sha1
group 2
crypto ikev2 policy IKEV2-POLICY-RA
proposal IKEV2-PROPOSAL-RA
crypto ikev2 profile IKEV2-PROFILE-RA
match identity remote key-id mydomain.com
identity local dn
authentication remote eap query-identity
authentication local rsa-sig
pki trustpoint PKI-TP-SS-RA
dpd 60 2 on-demand
aaa authentication eap AAA-AuthC-List-RA
aaa authorization group eap list AAA-AuthZ-List-RA
virtual-template 10
no crypto ikev2 http-url cert
crypto ipsec profile IPSEC-PROFILE-AES-256
set transform-set IPSEC-AES-256
crypto ipsec profile IPSEC-PROFILE-AES256-SHA1
set transform-set IPSEC-AES256-SHA1
set ikev2-profile IKEV2-PROFILE-RA
interface Loopback10
ip address 10.0.0.1 255.255.255.0
interface Virtual-Template10 type tunnel
description FlexVPN-RA tunnel
bandwidth 20000
ip unnumbered Loopback10
ip mtu 1400
ip flow ingress
ip tcp adjust-mss 1360
tunnel mode ipsec ipv4
tunnel protection ipsec profile IPSEC-PROFILE-AES256-SHA1

Please tell me where my Mail is getting Elementary School-isized. anyone?
Mail's Preferences do not affect what is seen at the other end, they are only for local display. To have the recipient see your desired font, you must set it individually for each message in the New Message pane (also you should make it different than what is set in the Preferences, because of a bug). Or you can use custom Stationery.
A workaround used by some is to create a signature in your desired font and begin your message in the first line of the sig.
If these options are not satisfactory, best to switch to Entourage or Thunderbird.

Similar Messages

My itunes are on windows 97. just got windows 7 laptop. when i load new software on my new laptop it shows all my windows 97 music/audiobooks but can not find the files. how do I link them

my itunes are on windows 97. just got windows 7 laptop. when i load new software on my new laptop it shows all my windows 97 music/audiobooks but can not find the files. how do I link them

iDevices are not and have never been backup devices.
Authorizing a computer does not cause media to magically appear.
Media is only where the user puts it.
Copy the ENTIRE iTunes folder from the old computer to the new computer.

WRT160NL DHCP reserved clients are not showing up in the DHCP Reservation window.... Why?

I have 5 computers linked to my router. 4 are hardwired and I set it up so that each of the 5 has it's own static address. One of those computers is my DVR security camera system so can monitor my cameras remotely. It was working fine for years and now I can't access the DVR remotely anymore. I notice in the router Setup that the DHCP clients are not showing up as active even though two of the computers are on. I am running XP Pro on these machines and I can PING between them so I know some communication is going on. Also I can access the DVR cameras from my main computer using the internal IP address I assigned to the DVR, but not if I try to use my current WAN IP address.
Would appreciate any advice on troubleshooting this problem.
Thanks
Solved!
Go to Solution.

It may have something to do with the firmware of the router. I suggest you should do that. The firmware that you can download from the Linksys website is version 1.0.0.3 Build 2. (http://support.linksys.com/en-us/support/routers/WRT160NL). After the upgrade, reset the router to factory settings (pressing and holding down the reset button). It is best to re-configure the router from scratch also. Try to power cycle your whole network as well.

Some clients are not receiving my mail attachments.

Some clients are not receiving my mail attachments. Other recipients of the same email DO receive these attachments. It doesn't matter whether it is a jpg, pdf, doc, or other. Sending from gmail or entourage works, only sending from apple mail is a problem. This has been an ongoing problem for me in Lion and Snow Leopard. I'm new to this forum, so not sure I'm posting in the right area, but I've searched for an answer and can't find anything. Do I need a plug-in or something? I like my apple mail and don't want to switch, but this is a real problem for me. Help, please!

We have the same problem in Snow Leopard, so the problem isn't new. I've been researching this for a while now. Based on what I've read in a whole load of discussions it seems it's an issue in the way Outlook reads the e-mails send by Apple Mail. I've no idea of the technicalities of this but one obvious difference is that Mail's default formatting is Rich Text and Outlook's is HTML, but what do I know.
We've done variuos test with our PC based clients but with no success: Send as Icon; Window's friendly attachement; Mail Attachement Iconiser, etc. Nothing gets rid of the problem entirely. We're a Mac based Public Relations agency and we send image to the media all of the time...and we have no guarantees that they are getting through.
It's frustrating that Mail doesn't have an option, as it does for plain text, to send in an outlook friendly way. To me it's a huge problem and if Apple isn't going to sort it, given that Outlook is the choice of Enterprise and 95% of our clients, then we're going to have to spend thousands and switch to Outlook. Apple have gone to great pains to promote cross-compatibility with PC's and perhaps this is one little example of where they could try harder.
Mail has not had much obvious love and attention for a while and if there's an Apple employee looking in on this thread, perhaps it's time to love it up, give it a few more bells and whistles (without over-complicating of course) and make it sing with Outlook.
My last attenpt is to try Thunderbird as a default mail client; I'm told it doesn't suffer from the same PC compatibility issues.

Oracle client do not find the odbc dlls.

i was trying to connect to sql server through odbc in forms10g using exec_sql. some one told me that ur oracle client do not find the odbc dlls.
Can some one guide me how to setup everything so that it start working

Yes, there's a 64 bit ODBC driver. it comes with the 64 bit Oracle client install software.
You should be able to find quite a few '64 bit' type posts on this forum, but in a nutshell:
1) both 32 bit and 64 bit administrator are called odbcad32.exe, you need to invoke the right one
2) 64 bit apps require 64 bit dsn/odbc/client
3) 32 bit apps require 32 bit dsn/odbc/client
4) supported versions on 2008R2 are 10205, 11201, and 11202
Hope it helps,
Greg

Clients are not getting software updates

Hi All,
We have setup SCCM2012 with wsus, i installed the clients on some pcs and i can see the sccm software agent on pcs but clients are not getting updated. on SCCM2012 server console i downloaded then selecting deploy option and it is
showing download-YES and deploy-Yes but clients are not getting.
can anyone please tell me what could be the reason.
do i need to check at clients side that the sccm2012 site is working in browser? i checked it is not working becuase proxy is enabled. need to define in exception.
Thanks.
Agha

Hi Kent,
I checked in registry on clients, it is showing correct name. please find the below WUAHandler.log error:
<![LOG[CWuaHandler::SetCategoriesForLeafStateReportingExclusion called with E0789628-CE08-4437-BE74-2495B842F43B]LOG]!><time="09:28:31.299-180" date="02-02-2013" component="WUAHandler" context="" type="1" thread="6976" file="cwuahandler.cpp:2452">
<![LOG[Its a WSUS Update Source type ({D5ED6611-7DFF-4013-B8BB-F9FF4DE0EF1D}), adding it.]LOG]!><time="10:02:58.396-180" date="02-02-2013" component="WUAHandler" context="" type="1" thread="8020" file="sourcemanager.cpp:1222">
<![LOG[Enabling WUA Managed server policy to use server:
http://sccmsrv and Policy ENABLED]LOG]!><time="10:02:59.145-180" date="02-02-2013" component="WUAHandler" context="" type="3" thread="8020" file="sourcemanager.cpp:1000">
<![LOG[Failed to Add Update Source for WUAgent of type (2) and id ({D5ED6611-7DFF-4013-B8BB-F9FF4DE0EF1D}). Error = 0x87d00692.]LOG]!><time="10:02:59.145-180" date="02-02-2013" component="WUAHandler" context="" type="3" thread="8020" file="cwuahandler.cpp:2322">
<![LOG[Its a WSUS Update Source type ({D5ED6611-7DFF-4013-B8BB-F9FF4DE0EF1D}), adding it.]LOG]!><time="05:53:02.950-180" date="02-03-2013" component="WUAHandler" context="" type="1" thread="1424" file="sourcemanager.cpp:1222">
<![LOG[Enabling WUA Managed server policy to use server:
http://sccmsrv and Policy ENABLED]LOG]!><time="05:53:05.462-180" date="02-03-2013" component="WUAHandler" context="" type="3" thread="1424" file="sourcemanager.cpp:1000">
<![LOG[Failed to Add Update Source for WUAgent of type (2) and id ({D5ED6611-7DFF-4013-B8BB-F9FF4DE0EF1D}). Error = 0x87d00692.]LOG]!><time="05:53:05.462-180" date="02-03-2013" component="WUAHandler" context="" type="3" thread="1424" file="cwuahandler.cpp:2322">
<![LOG[Its a WSUS Update Source type ({D5ED6611-7DFF-4013-B8BB-F9FF4DE0EF1D}), adding it.]LOG]!><time="11:07:01.094-180" date="02-03-2013" component="WUAHandler" context="" type="1" thread="4692" file="sourcemanager.cpp:1222">
<![LOG[Enabling WUA Managed server policy to use server:
http://sccmsrv and Policy ENABLED]LOG]!><time="11:07:03.606-180" date="02-03-2013" component="WUAHandler" context="" type="3" thread="4692" file="sourcemanager.cpp:1000">
<![LOG[Failed to Add Update Source for WUAgent of type (2) and id ({D5ED6611-7DFF-4013-B8BB-F9FF4DE0EF1D}). Error = 0x87d00692.]LOG]!><time="11:07:03.606-180" date="02-03-2013" component="WUAHandler" context="" type="3" thread="4692" file="cwuahandler.cpp:2322">
<![LOG[Its a WSUS Update Source type ({D5ED6611-7DFF-4013-B8BB-F9FF4DE0EF1D}), adding it.]LOG]!><time="11:08:00.110-180" date="02-03-2013" component="WUAHandler" context="" type="1" thread="4692" file="sourcemanager.cpp:1222">
<![LOG[Enabling WUA Managed server policy to use server:
http://sccmsrv and Policy ENABLED]LOG]!><time="11:08:01.374-180" date="02-03-2013" component="WUAHandler" context="" type="3" thread="4692" file="sourcemanager.cpp:1000">
<![LOG[Failed to Add Update Source for WUAgent of type (2) and id ({D5ED6611-7DFF-4013-B8BB-F9FF4DE0EF1D}). Error = 0x87d00692.]LOG]!><time="11:08:01.374-180" date="02-03-2013" component="WUAHandler" context="" type="3" thread="4692" file="cwuahandler.cpp:2322">

I am adding new photos to my PC windows 7 desktop but they are not syncing to my ipad. how can i get these photos to sync

I am adding new photos to my PC windows 7 desktop but they are not syncing to my ipad when I sync the Ipad. How can I get these photos into my Ipad?

Skydiver.
you and I know that your answer works because that is how I sync my ipad. I don't have a mac, just a PC with itunes. Now this guy might not even have itunes and is using Windows Media Player or something like that.
Or maybe he just do not want his problem fixed. I read these forums and too many of the questions are just way beyond basic computer knowledge, but it seems to happen that they can never resolve a very simple problem. It makes me wonder if people just post bogus stuff.
I would like to see registration to the forums attached to the product serial number of the forum you are posting to. I bet you that the posts would drop dramatically.

SCCM 2012 R2 Clients are not retrieving policy

Hi - I know this question has been asked many times before - but I have tried almost everything and a no closer to solving the problem.
Background: Recently a SCCM 2012 SP1 single stand-alone site was upgraded to SCCM 2012 R2. The site is a single stand-alone primary site with a single DP, single MP, using mixed mode
(HTTP). The R2 upgrade ran without any problem and all SCCM components are showing as healthy.
A few test SCCM 2012 SP1 clients were upgraded to the R2 client using client-push.
However the upgraded clients are not retrieving policy from the Management Point. In the Actions Tab of the SCCM client, only Machine Policy Retrieval and User Policy Retrieval are available. But kicking of those actions does not
result in any of the advertised applications, Task Sequences becoming available. Infact Custom Client Settings are not being set either (e.g. Organisation Name in software Center).
I have checked and rechecked the following:
The upgrade of the client completed successfully (checked ccmsetup.log) and the version number went from 5.00.7804.1000 (SP1) to 5.00.7958.1000 (R2).
The MP health in the SCCM console is showing healthy.
The MP access URL's load correctly when run from SCCm client computers
“http://<ServerName>/sms_mp/.sms_aut?mplist” is ok
“http://<ServerName>/sms_mp/.sms_aut?mpcert” is ok
The SCCM clients are assigned to the site correctly – verified via the SCCM client and
ClientLocation.Log
ClientIDManager.Log is not showing any errors
CCMExec.log and ExecMgr.log don't show any advertisements being executed (Execmgr.log is almost empty and only has "Software ditrbution site settings policy does not yet exist on the client). If the client is not yest
registered this is expected behaviour")
The SCCM clients are Approved and NOT Blocked in SCCM
I have attempted to upgrade the SCCM client and also completely removed and reinstalled - and both have the same result (no client policy dpwnloaded)
I have also deleted the above clients completely from SCCM, Run divoery again and pushed the client to the machines again ...with the same result (SCCM client installs, assigns to correct site and then no policy downloaded)
SCCM 2012 Boundaries are configured correctly and assigned to Boundary Groups correctly
The SCCM client’s do not have the firewall enabled
Changed boundary from AD Site to Subnet to IP Address Range: Same issue exists
Uninstalled MP role and reinstalled it: same Issue exists
Tried to connect to SCCm client using 3rd party SCCM Client center tool but cannot connect
??? Not sure what else to try ???

Hi all - sorry for the late response.
We managed to resolve the issue after logging a job with Microsoft Support.
The issue was that the SCCM 2012 R2 upgrade corrupted 2 tables in the SCCM Database - leading to corrupt SCCM client policies.
I am pasting the resolution email from Microsoft below:
(NOTE: This may not be the exact sypmtoms you are experiencing so do not implement this fix assuming it will fix your problem!)
ISSUE:
- All clients are unable to download policies from the server
CAUSE:
- Bad policies in the Database
RESOLUTION:
-Issue with PADbID - Run below query against SCCM DB to verify corrupt entries:
SELECT * FROM
ResPolicyMap WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)
Confirmed Bad policies entries in the SCCM database
Run below query to delete the bad policy after which we resolved the issue:
Delete FROM ResPolicyMap
WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)"

MDT 0xc0000098 The windows boot configuration data file does not contain a valid OS entry

hello,
i installed WDS+MDT for OS deployment. all was working fine.
Now i need our branch office to be able to deploy OS as well.
I installed a new Win 2008R2 server, and installed the WDS service on it.
When reading about this on the internet i saw i need, on the MDT at our main office, to make a link, under "Advanced Configuration" - "Linked Deployment Shares" to the new WDS server (I used this: http://www.balm.se/?p=115")
when doing so i entered the UNC path to the new server and then, on the created link, i right click and choose "Replicate now".
after doing so, i tried booting a laptop just to see if there is any impact, and now, I'm getting this error:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. insert your windows installation disk and restart your computer
2. choose your language, and then click "Next"
3. Click "Repair your computer"
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: \Boot\BCD
Status: 0xc0000098
Info: The windows Boot Configuration Data file does not contain a valid OS entry.
I know that usually when I'm getting this message, it means that a previous MDT installation was started and did not finished correctly, and the are some [stuff] on the HD, so i do a partition erase and start over and all working fine.
Now it's not working. I tried several computer, even new ones, and NADA.
someone know the cause?
I know I read something, i don't remember where or how to find it, that when doing the steps I did, it alter\change some ini or xml, or something like this. is that true? any one know on what file do i need to look and see if something is misconfigured?
thanks a lot for your help

hello,
i installed WDS+MDT for OS deployment. all was working fine.
Now i need our branch office to be able to deploy OS as well.
I installed a new Win 2008R2 server, and installed the WDS service on it.
When reading about this on the internet i saw i need, on the MDT at our main office, to make a link, under "Advanced Configuration" - "Linked Deployment Shares" to the new WDS server (I used this: http://www.balm.se/?p=115")
when doing so i entered the UNC path to the new server and then, on the created link, i right click and choose "Replicate now".
after doing so, i tried booting a laptop just to see if there is any impact, and now, I'm getting this error:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. insert your windows installation disk and restart your computer
2. choose your language, and then click "Next"
3. Click "Repair your computer"
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: \Boot\BCD
Status: 0xc0000098
Info: The windows Boot Configuration Data file does not contain a valid OS entry.
I know that usually when I'm getting this message, it means that a previous MDT installation was started and did not finished correctly, and the are some [stuff] on the HD, so i do a partition erase and start over and all working fine.
Now it's not working. I tried several computer, even new ones, and NADA.
someone know the cause?
I know I read something, i don't remember where or how to find it, that when doing the steps I did, it alter\change some ini or xml, or something like this. is that true? any one know on what file do i need to look and see if something is misconfigured?
thanks a lot for your help
For a branch solution I would use DFS(R) rather than linked deploymentshares.
If there is infrastructure at the remote sites you could use the MDT environment at your main site, and then at each other site use an existing server or build a new server (VM is available). Create a Deploymentshare on each sever
and copy the contents of the MDT environment from the first site into this share. Next you will have to add the WDS service to each site's server. For WDS add the boot image. Of course as Keith noted ensure that you
have the same versions of MDT and the WAIK/ADK on all systems
You can use DFS to replicate to all of the other sites, but you will still have to create a deploymentshare, and install WDS at each site. So each site talks to its own WDS server you can use the DefaultGateway parameter instead -
[Settings]
Priority=Default, DefaultGateway
[Default]
SkipBDDWelcome=YES
[DefaultGateway]
192.168.10.1=Bergen
192.168.20.1=Oslo
[Bergen]
DeployRoot=\\MDT-Bergen\DeploymentShare$
[Oslo]
DeployRoot=\\MDT-Oslo\DeploymentShare$
If this post is helpful please click "Mark for answer", thanks! Kind regards

Move Mailboxes from Exchange 2007 to Exchange 2013 (Could not find a valid mailbox migration for esta organization)

Hi all, I am in full migration from Exchange 2007 to Exchange 2013 and everything went correctly.
I have migrated several mailboxes and are working well. But a few days ago, when I try to migrate a mailbox I get the following error and can not migrate:
"Could not find a valid mailbox migration for this organization"
Do you know that you can be?
regards
Microsoft Certified IT Professional Server Administrator

Hi,
From your description, the issue should be related to the migration mailbox. I recommend you check if the following account is existed in ADUC.
Migration.8f3e7716-2011-43e4-96b1-aba62d229136
If this account does not exist, you need to run setup /prepareAD and then enable this migration mailbox to check the result.
Hope this can be helpful to you.
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Amy Wang
TechNet Community Support

Could not find a valid Java virtual machine to load

On a fresh copy of CFMX8, when I run updater 7, it responds
'Could not find a valid Java virtual machine to load'.
This is being installed on a Win2K3 server and this is on a
'freshly minted' POC box solely for the purpose of
installing/testing CFMX8 to determine how it compares to our
CFMX6.1 environment.
You will notice that it is NOT being installed in the default
directory:
JRun Version Information
Vendor Macromedia
Product Name JRun 4.0
Build Number 108487
Version Full Version
License Type Trial License
Serial Number JRD400-69341-58259-30688
JRun 3.x Serial Number
Restricted to Single IP No
Installation Root D:\ISG\software\jrun4
Expiration Date Mar 29, 2008
Evaluation Days Remaining 29
JDK path (JAVA_HOME): D:/ISG/software/jrun4/jre
I do find it curious that I can run the Updater 6, and it
seems to behave properly (it finds the VM). I ran it just as a
test, then wiped everything to start over from scratch. For some
reason do I need to direct Updater 7 to the installation that I did
not have to do in Updater 6?
Thank you in advance for your assistance - Jacques

tried executing the following cmd, below is the following error:
<<command i executed>>
C:\Program Files\Java\jre1.5.0_09\bin>java -classpath "C:\Program Files\Java\jre1.5.0_09\lib\javaws.jar" com.sun.javaws.Main https://<IPddr>:8443/sample.jnlp
Can you pls let me know how it can be resolved?Umm.. I am not sure, but I will start with
a question. Why not do it this way?C:\Program Files\Java\jre1.5.0_09\bin>javaws https://<IPddr>:8443/sample.jnlp

Does anyone know why since upgrading to ML notes are not visible in Time Machine. They used to be part of mail and could be recovered from Time machine but since ML I don't seem to be able to access notes in Time Machine. Any help would be useful.

Does anyone know why since upgrading to ML notes are not visible in Time Machine. They used to be part of mail and could be recovered from Time machine but since ML I don't seem to be able to access notes in Time Machine. Any help would be useful.

Welcome to Apple Communities
Mail doesn't support notes. If you use iCloud, you have them in it because Notes is an application

Error: JAR-Ressources in JNLP-File are not signed from the same Certificate

I have two handfull jars, all signed in batch with the same
Certificate. When i start my App with Webstart it tells me:
Your JAR-Ressources in JNLP-File are not signed from the same Certificate.
"JAR-Ressourcen in JNLP-Datei sind nicht von demselben Zertifikat signiert"
Well im shure that i signed all my jars with the same Certificate.
What can i do to solve this problem ???

I get the same error.
Strangely exactly every second time it works and every second time I execute the JNLP I get the following error:
network: Cache-Eintrag nicht gefunden [url: http://localhost:8080/fibo/lib/js_15R41.jar, Version: null]
network: Verbindung von socket://127.0.0.1:3621 mit Proxy=DIRECT wird hergestellt
#### Java Web Start Error:
#### JAR-Ressourcen in JNLP-Datei sind nicht von demselben Zertifikat signiertCan this have something to do with browser caching? So that every 2nd time it tries to access the cache, fails. And than ignores the cache and works?
Any ideas?
Cheers,
Rio

Adobe premiere could not find any valid editing modes error

Hi, I am installing adobe premiere 8 and the update patch and when I click New Project I get the error message Adobe premiere could not find any valid editing modes, please reinstall and start again. I have reinstalled, installed patch, checked for the vidc.draw in registry and none of these have resolved.
Have XP service pack 3, with valid HD space etc... Any suggestions greatly appreciated.

Hello, Kelzb,
Premiere Elements has its own forum, which is here:
http://forums.adobe.com/community/premiere/premiere_elements
and you'll probably get better, faster replies to video questions there. Good luck!

The Systems Did Not Find a Valid Bill Of Material

Hi Everyone,
when creating a sales order - with a sales bom we encounter the following message - 'The Systems Did Not Find a Valid Bil Of Material'. If anyone has encounter such a message before appreciate of you can help to shed some light. Below is the settings which I have set-up in our systems.
- When creating sales order the following error appears 'The systems did not find a valid bill of material'.
- Detail of the error message
- The item category TAQ having the field structure scope - A & Application - SD01.
The component of the bom which supppose to appear in the sales order
The item category settings.
The sales bom structure.

Hi Phanikumar / G. Lakshmipath,
I truly appreciate both your feedback as the systems which I am currently working have most of the setings either wipe off or gone for good. I may have ask some basic questions .. however please do not misunderstand me as the situation i am currently in is really in a fixed (as I have receive some sarcastic remarks).
I have done the checking and made the corrections as per your advice, however i am still encountering the same message which says no valid BOM.
Settings which I have change.
Item category determination for header
Item category determination for item
Thanks
Regards
Ken

Windows built-in IKEv2 clients are not finding a valid machine certificate

Similar Messages

Maybe you are looking for