Error vendor code 942 when connecting with different user

Hello,
I'm using CR2013 with SP1 and Oracle 11r2.
I created a report to be used in several applications. Each application access the database with a different username.
Each username (userapp1, userapp2...) was created by a DBA user giving grants to access to all tables needed to run the report.
What is happening is when I run the report through the application using DBAuser credencials everything runs smoothly.
But when I try to run the report using the "userapp" credentials I get the error vendor code 942.
In the Crystal Reports I can use any credentials (DBAuser ou userapp) that works fine, but through the application I always get this error.
Anyone can help?
Thanks in advance
Luis

Hi Luis
What sort of an application is this? One you created? One obtained from a 3rd party vendor? What CR SDK does the app use? What language was the app coded in?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Similar Messages

I am having trouble using Facetime. When connecting with known users the connection drops out just as the other person accepts my call

I am having trouble with Facetime. On answering my call by another party the connection immediately fails

Hello alancc1942,
The following article provdies some useful troubleshooting steps that can help resolve such issues with FaceTime.
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/TS3367
Cheers,
Allen

ORA-04062 error when running forms with different users

ORA-04062 error when running forms with different users
I have a form that has a block that should display some data from another users tables. (The other user's name is dynamic, it's selected from a list box)
I wrote a stored procedure to get the data from other user's tables.
When I compile the form and run it with the same user I compiled, it works without any error. But when I run the compiled form with another user I get the ORA-04062 (signature of procedure has been changed) error.
I tried setting REMOTE_DEPENDENCIES_MODE to SIGNATURE in init.ora but it didn't help.
My Forms version is 6i with Patch 15.
Database version is 9.
Here is my stored procedure:
TYPE Scenario_Tab IS TABLE OF NUMBER(34) INDEX BY BINARY INTEGER;
TYPE Open_Curs IS REF CURSOR;
PROCEDURE Get_Scenarios(User_Name IN VARCHAR2, Scen_Table OUT Scenario_Tab) IS
Curs Open_Curs;
i NUMBER;
BEGIN
OPEN Curs FOR
'SELECT Seq_No FROM '|| User_Name ||'.scenario';
i := 1;
LOOP
FETCH Curs INTO Scen_Table(i);
EXIT WHEN Curs%NOTFOUND;
i := i + 1;
END LOOP;
END Get_Senarios;
I would be happy to solve this problem. It's really important.
Maybe somebody can tell me another way to do what I want to do. (getting a list of values from another users tables)

I think it should be a better solution to create a package,
and put your own TYPES and procedure into it.
CREATE OR REPLACE PACKAGE PKG_XXX IS
TYPE TYP_TAB_CHAR IS TABLE OF .... ;
PROCEDURE P_XX ( Var1 IN VARCHAR2, var2 IN OUT TYP_TAB_CHAR );
END ;
Then in your Form :
Declare
var PKG_XXX.TYP_TAB_CHAR ;
Begin
PKG_XXX.P_XX( 'user_name', var ) ;
End ;

TS3694 Downloaded latest IOS 7.0.2 and it crashed my iphone 4. Now Ive got nothing and it wont restore when connected with Itunes cos Error Message 4005 comes up. Cant find it listed anywhere. Help

Downloaded latest IOS 7.0.2 and it crashed my iphone 4. Now Ive got nothing and it wont restore when connected with Itunes cos Error Message 4005 comes up. Cant find it listed anywhere. Help

Hi!
It looks like there might be some security settings or software on your laptop that's preventing the restore process from working.
Check out this article in Apple's support. It shows you the steps you can take to try to get around error 1611.
Like diesel vdub said, a DFU-mode restore might give you success where a regular restore might not, so maybe you can try that.
What you need to do is put your phone into DFU mode, which is a low-level mode that helps the restore process get a little more done, or it can help iTunes get around certain roadblocks (hopefully like the one you're experiencing!). Your computer will install special DFU-iPhone drivers for it, and then iTunes will see it as a phone that needs restoring.
To get your phone into DFU mode:
Plug your phone into your laptop.
Turn the phone off.
Press and hold the power/lock button. Keep it held in, even after the display turns on and you see something on the screen. As soon as you see something on the screen, start holding the home button as well as the power button, so that they're being pressed together.
Keep both buttons pressed down for 10 seconds.
After 10 seconds, release the power button, but keep holding home until the laptop sees a new USB device. Once you see that, you're in DFU mode, and you can let go of buttons. Your iPhone screen will be blank during it all, even though it's actually on, in DFU mode.
Now your restore should work!
If your phone shows the Apple logo or anything else while you're trying to get it into DFU mode, then something went wrong. Try the steps again. If it suddenly starts up normally again, try reducing the time to a bit less than 10 seconds--try reducing it by about a second at a time. It should work!

SQL Developer 1.5.4.59.40 - IO Exception: Undefined Error VENDOR CODE 17002

Hi All.
I hope someone can help.
I have recently installed Oracle XE on my Vista Ultimate laptop and it is up and running with no apparent problems. I then connected to the HR schema on XE with no problems using SQL Developer 1.2.1.3213 (OLD Version). I noticed that SQL Developer 1.5.4.59.40 (NEW version) was available and downloaded it (the offering without JDK included) and renamed the "C:\Program Files\SQLDeveloper" folder holding the older version to "C:\Program Files\SQLDeveloper_Orig" and placed the new version of SQL Developer in the Prog Files directory to give "C:\Program Files\SQLDeveloper".
I then ran SQLDeveloper.exe (NEW) and when requested gave the JDK path as "C:\Program Files\Java\JDK_1.6.0_11\bin\java.exe" ('Java -version' gives 1.6.0_11-b03) and migrated over the settings from the previous version of SQLDeveloper (OLD).
The Application loads fine but when i attempt to connect to XE's HR schema i get the following error:
"IO Exception: Undefined Error
VENDOR CODE 17002"
I have searched to try and find out what is going on but cannot find any solutions that work. The previous 17002 error solutions on this forumn have all failed.
These included changing the JDK.conf file to hold route to JDK directory and also creating a 'bat' file.
My system does not have the directory for the JDK in it's PATH environment setting (either USER or SYSTEM) but does include a directory path under SYSTEM environment vars to another version fo JDK on my machine under "C:\Program Files\Sun\JDK\". I thought this may be causing a conflict but it is version 1.6.0.05_b13 and is also compatible-is it not? I also have Java JRE6 (1.6.0_12-b04) on my machine - this does not have a PATH variable and was not referenced when loading SQL Developer when loading the first time.
Can anyone help me resolve this, why can the previous version still connect OK to XE and not new version? is there something i am missing? Do i require the Java JDK Directory to be placed under a PATH environment SYSTEM variable?
Thanks in advance,
M
Edited by: user592047 on 16-Mar-2009 10:08

Taken from about SQL Developer:
Version:
CVS Version          Internal to Oracle SQL Developer (client-only)
Java(TM) Platform     1.6.0_11
Oracle IDE          1.5.4.59.40
Versioning Support     1.5.4.59.40
Properties:
apple.laf.useScreenMenuBar     true
awt.toolkit                    sun.awt.windows.WToolkit
class.load.environment          oracle.ide.boot.IdeClassLoadEnvironment
class.load.log.level          CONFIG
class.transfer               delegate
com.apple.macos.smallTabs     true
com.apple.mrj.application.apple.menu.about.name     "SQL_Developer"
com.apple.mrj.application.growbox.intrudes     false
file.encoding               Cp1252
file.encoding.pkg               sun.io
file.separator               \
http.agent                    Mozilla/5.0 (Java 1.6.0_11; Windows Vista 6.0 x86; en_GB) ICEbrowser/v6_1_3
ice.browser.forcegc          false
ice.pilots.html4.ignoreNonGenericFonts     true
ice.pilots.html4.tileOptThreshold     0
ide.AssertTracingDisabled     true
ide.bootstrap.start          10390897243225
ide.build                    MAIN-5940
ide.conf                    C:\Program Files\sqldeveloper_new\sqldeveloper\bin\sqldeveloper.conf
ide.config_pathname          C:\Program Files\sqldeveloper_new\sqldeveloper\bin\sqldeveloper.conf
ide.debugbuild               false
ide.devbuild               false
ide.extension.search.path     sqldeveloper/extensions:jdev/extensions:ide/extensions
ide.firstrun                    false
ide.java.minversion          1.5.0
ide.launcherProcessId          2672
ide.main.class               oracle.ide.boot.IdeLauncher
ide.patches.dir               ide/lib/patches
ide.pref.dir                    C:\Users\M\AppData\Roaming\SQL Developer
ide.pref.dir.base               C:\Users\M\AppData\Roaming
ide.product                    oracle.sqldeveloper
ide.shell.enableFileTypeAssociation     C:\Program Files\sqldeveloper_new\sqldeveloper.exe
ide.splash.screen               splash.gif
ide.startingArg0               C:\Program Files\sqldeveloper_new\sqldeveloper.exe
ide.startingcwd               C:\Program Files\sqldeveloper_new
ide.user.dir                    C:\Users\M\AppData\Roaming\SQL Developer
ide.user.dir.var               IDE_USER_DIR
ide.work.dir               C:\Users\M\Documents\SQL Developer
ide.work.dir.base               C:\Users\M\Documents
java.awt.graphicsenv          sun.awt.Win32GraphicsEnvironment
java.awt.printerjob          sun.awt.windows.WPrinterJob
java.class.path               ..\..\ide\lib\ide-boot.jar
java.class.version               50.0
java.endorsed.dirs          C:\Program Files\Java\jdk1.6.0_11\jre\lib\endorsed
java.ext.dirs               C:\Program Files\Java\jdk1.6.0_11\jre\lib\ext;C:\Windows\Sun\Java\lib\ext
java.home                    C:\Program Files\Java\jdk1.6.0_11\jre
java.io.tmpdir               C:\Users\M\AppData\Local\Temp\
java.library.path               C:\Program Files\sqldeveloper_new;.;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;C:\oracle\xe\app\oracle\product\10.2.0\server\bin;C:\Program Files\CodeGear\RAD Studio\5.0\bin;C:\Users\Public\Documents\RAD Studio\5.0\Bpl;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared\;c:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Users\Public\Documents\RAD Studio\5.0\Bpl;C:\Program Files\Common Files\Teleca Shared;C:\Program Files\Microsoft Network Monitor 3\;C:\PROGRA~1\DISKEE~1\DISKEE~1\;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Java\jdk1.6.0_11;C:\Program Files\Sun\SDK\bin;C:\Users\Public\Documents\RAD Studio\5.0\Bpl;C:\Program Files\Nmap
java.naming.factory.initial     oracle.javatools.jndi.LocalInitialContextFactory
java.runtime.name          Java(TM) SE Runtime Environment
java.runtime.version          1.6.0_11-b03
java.specification.name          Java Platform API Specification
java.specification.vendor     Sun Microsystems Inc.
java.specification.version     1.6
java.util.logging.config.file     logging.conf
java.vendor                    Sun Microsystems Inc.
java.vendor.url               http://java.sun.com/
java.vendor.url.bug          http://java.sun.com/cgi-bin/bugreport.cgi
java.version                    1.6.0_11
java.vm.info               mixed mode
java.vm.name               Java HotSpot(TM) Client VM
java.vm.specification.name     Java Virtual Machine Specification
java.vm.specification.vendor     Sun Microsystems Inc.
java.vm.specification.version     1.0
java.vm.vendor               Sun Microsystems Inc.
java.vm.version               11.0-b16
jdbc.library                    /C:/Program Files/sqldeveloper_new/jdbc/lib/ojdbc5.jar
line.separator               \r\n
oracle.home               C:\Program Files\sqldeveloper_new
oracle.ide.util.AddinPolicyUtils.OVERRIDE_FLAG     true
oracle.translated.locales     de,es,fr,it,ja,ko,pt_BR,zh_CN,zh_TW
oracle.xdkjava.compatibility.version     9.0.4
orai18n.library               /C:/Program Files/sqldeveloper_new/jlib/orai18n.jar
os.arch                    x86
os.name                    Windows Vista
os.version                    6.0
path.separator               ;
reserved_filenames          con,aux,prn,lpt1,lpt2,lpt3,lpt4,lpt5,lpt6,lpt7,lpt8,lpt9,com1,com2,com3,com4,com5,com6,com7,com8,com9,conin$,conout,conout$
sun.arch.data.model          32
sun.boot.class.path          C:\Program Files\Java\jdk1.6.0_11\jre\lib\resources.jar;C:\Program Files\Java\jdk1.6.0_11\jre\lib\rt.jar;C:\Program Files\Java\jdk1.6.0_11\jre\lib\sunrsasign.jar;C:\Program Files\Java\jdk1.6.0_11\jre\lib\jsse.jar;C:\Program Files\Java\jdk1.6.0_11\jre\lib\jce.jar;C:\Program Files\Java\jdk1.6.0_11\jre\lib\charsets.jar;C:\Program Files\Java\jdk1.6.0_11\jre\classes
sun.boot.library.path          C:\Program Files\Java\jdk1.6.0_11\jre\bin
sun.cpu.endian               little
sun.cpu.isalist               pentium_pro+mmx pentium_pro pentium+mmx pentium i486 i386 i86
sun.desktop               windows
sun.io.unicode.encoding     UnicodeLittle
sun.java2d.ddoffscreen          false
sun.jnu.encoding               Cp1252
sun.management.compiler     HotSpot Client Compiler
sun.os.patch.level          Service Pack 1
user.country               GB
user.dir                    C:\Program Files\sqldeveloper_new\sqldeveloper\bin
user.home                    C:\Users\M
user.language               en
user.name                    M
user.timezone               Europe/London
user.variant
windows.shell.font.languages

Error: 1021001 Failed to Establish Connection With SQL Database Server

Hello,
Someone you already MEETS it the following error during an essbase retrieve DLR.
My client oracle essbase on my server is 64bit, Essbase 11.1.2.2 x64
I run the odbc located in% windir% \ system32 \ odbcad32.exe
"Error: 1021001 Failed to ESTABLISH Connection With SQL Database Server. See log for more information"
Here is the log:
Received Command [SQLListDsn] from user [admin]
[2:50:33 p.m. Fri 28 September 2012] Local / CAS_TEST / / / 8168/Info (1042059)
Connected from [10.100.50.2]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1013091)
Received Command [SQLRetrieve] from user [admin]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021004)
Connection String is generated
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021041)
Connection String is [DSN = TEST_ORACLE; UID = ...; PWD = ...]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021006)
SELECT Statement [SELECT from dual;] is generated
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021013)
ODBC Layer Error: [IM004] ==> [[Microsoft] [ODBC Driver Manager] Driver's SQLAllocHandle we failed SQL_HANDLE_ENV]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021014)
ODBC Layer Error: Native Error code [0]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Error (1021001)
Failed to ESTABLISH Connection With SQL Database Server. See log for more information
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Warning (1080014)
Transaction [0x780001 (0x50659d19.0xc9e78)] aborted due to status [1021001].
When I try to go through OCI service name:
dbServerName: port / service_name
I have the following error message:
Solutions2: List of members 1423.CAS_TEST.CAS_TEST September 28, 2012 2:50:15 PM CEST Succeeded
Read SQL record September 28, 2012 2:50:35 PM CEST Failed
thank you in advance
Edited by: 851398 on 28 sept. 2012 06:31

In essbase logs there is nothing special, same for windows log.
Everything I like is log in log view eas
[Fri Sep 28 17:52:11 2012]Local/CAS_TEST///4020/Info(1013205)
Received Command [Get Database Info]
[Fri Sep 28 17:52:11 2012]Local/CAS_TEST///4020/Info(1013205)
Received Command [Get Database State]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7580/Info(1013210)
User [admin] set active on database [CAS_TEST]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///6720/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/6720/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7304/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7304/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7572/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7572/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///8116/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/8116/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7384/Info(1013210)
User [admin] set active on database [CAS_TEST]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///6592/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/6592/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7972/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7972/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///216/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/216/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3104/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3104/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3472/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3472/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///8112/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/8112/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///4020/Info(1013205)
Received Command [Get Database Info]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3840/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3840/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7760/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7760/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7300/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7300/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7904/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7904/Info(1013091)
Received Command [OtlQuerySmartLists] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3612/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3612/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///6732/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/6732/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7576/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7576/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7268/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7268/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:27 2012]Local/CAS_TEST///7556/Info(1013210)
User [admin] set active on database [CAS_TEST]
[Fri Sep 28 17:52:29 2012]Local/CAS_TEST///8168/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:29 2012]Local/CAS_TEST/CAS_TEST/admin/8168/Info(1013091)
Received Command [SQLListDsn] from user [admin]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST///7564/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1013091)
Received Command [SQLRetrieve] from user [admin]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021004)
Connection String is generated
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021041)
Connection String is [DSN=TEST_ORACLE;UID=...;PWD=...;]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021006)
SELECT Statement [SELECT * from dual ] is generated
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021013)
ODBC Layer Error: [IM004] ==> [[Microsoft][ODBC Driver Manager] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021014)
ODBC Layer Error: Native Error code [0]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Error(1021001)
Failed to Establish Connection With SQL Database Server. See log for more information
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Warning(1080014)
Transaction [ 0xb50001( 0x5065c7d7.0x31ce0 ) ] aborted due to status [1021001].
Have you an idea about the Merant driver to essbase?
Thank

ORA-28545: error diagnosed by Net8 when connecting to an agent Unable to retrieve text of NETWORK/NCR message 65535

Hello All,
I have verified entire otn community, but none of the solution working for me and hence posting this problem. I'm getting below error message when I try to connect from oracle 11g to sqlserver database. All details are given below and request some body to provide resolution.
Oracle 11 g server installed in "Red Hat Enterprise Linux Server release 6.3"
Sqlserver running in Windows server enterprise 64bit OS.
$ cat initdg4msql.ora
# This is a customized agent init file that contains the HS parameters
# that are needed for the Database Gateway for Microsoft SQL Server
# HS init parameters
HS_FDS_CONNECT_INFO=[SJCGNMWQA2WEB01]:SQLEXPRESS//msdb
# alternate connect format is hostname/serverinstance/databasename
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
$ cat listener.ora
# listener.ora Network Configuration File: /home/oracle/11g/product/11/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
     (SID_NAME = dg4msql)
     (ORACLE_HOME = /home/oracle/11g/product/11)
     (PROGRAM = dg4msql)
$ cat tnsnames.ora
# tnsnames.ora Network Configuration File: /home/oracle/11g/product/11/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
GNMDB =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = sjcgnm62v2db1.skta.com)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = GNMDB)
dg4msql =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = sjcgnm62v2db1.skta.com)(PORT = 1521))
    (CONNECT_DATA = (SID = msdb))
    (HS = OK)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = sjcgnm62v2db1.skta.com)(PORT = 1521))
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
ADR_BASE_LISTENER = /home/oracle/11g
Output of lsnrctl start
$ lsnrctl start
LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 22-NOV-2013 15:17:08
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Starting /home/oracle/11g/product/11/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.2.0.3.0 - Production
System parameter file is /home/oracle/11g/product/11/network/admin/listener.ora
Log messages written to /home/oracle/11g/diag/tnslsnr/sjcgnm62v2db1/listener/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sjcgnm62v2db1.skta.com)(PORT=1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=sjcgnm62v2db1.skta.com)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 11.2.0.3.0 - Production
Start Date                22-NOV-2013 15:17:08
Uptime                    0 days 0 hr. 0 min. 0 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /home/oracle/11g/product/11/network/admin/listener.ora
Listener Log File         /home/oracle/11g/diag/tnslsnr/sjcgnm62v2db1/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sjcgnm62v2db1.skta.com)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
Services Summary...
Service "dg4msql" has 1 instance(s).
Instance "dg4msql", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
SQL> CREATE PUBLIC DATABASE LINK sqlserver CONNECT TO "sa" IDENTIFIED BY "gnm123" USING 'dg4msql';
Database link created.
SQL> select * from dual@sqlserver;
select * from dual@sqlserver
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from SQLSERVER
SQL> select * from "sys"."tables"@sqlserver;
select * from "sys"."tables"@sqlserver
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from SQLSERVER
Pl help.

Hi Klaus,
I just pick the gateway 11.2.0.3 patch to the installation. Here I got error and patch installation failed.
[oracle@sjcgnm62v2db1 13092292]$ opatch apply
Invoking OPatch 11.2.0.1.7
Oracle Interim Patch Installer version 11.2.0.1.7
Copyright (c) 2011, Oracle Corporation. All rights reserved.
Oracle Home       : /home/oracle/11g/product/11
Central Inventory : /home/oracle/oraInventory
   from           : /etc/oraInst.loc
OPatch version    : 11.2.0.1.7
OUI version       : 11.2.0.3.0
Log file location : /home/oracle/11g/product/11/cfgtoollogs/opatch/opatch2013-11-26_12-41-27PM.log
Applying interim patch '13092292' to OH '/home/oracle/11g/product/11'
Verifying environment and performing prerequisite checks...
Prerequisite check "CheckApplicable" failed.
The details are:
Patch 13092292: Required component(s) missing : [ oracle.rdbms.tg4db2, 11.2.0.3.0 ]
[ Error during Prerequisite for apply Phase]. Detail: ApplySession failed during prerequisite checks: Prerequisite check "CheckApplicable" failed.
Log file location: /home/oracle/11g/product/11/cfgtoollogs/opatch/opatch2013-11-26_12-41-27PM.log
Recommended actions: This patch requires some components to be installed in the home. Either the Oracle Home doesn't have the components or this patch is not suitable for this Oracle Home.
OPatch failed with error code 39
[oracle@sjcgnm62v2db1 13092292]$
Pl help.

Error -36 alert displays when connecting to a Windows server

Hi All
I am getting error -36 when I tried to copy any file or folder from windows server
"Error -36 alert displays when connecting to a Windows server"
Even the file info is zero KB, while from other MAC machine it is right size.

You shouldn't get the same error when you are doing it from Terminal. The error should be a little different. I just did a test. Is this a Microsoft 2003 server, 2000 or NT4 you are connecting to? Your post isn't specific. Make sure the System Preferences:Network:Advanced:WINS tab is filled in with the domain you are connecting to next to the "Workgroup" name. The WINS server should already be filled in. Open the connect window with command K. Type domainname\username for the login and then the password. If you don't want to enter the domain each time you will need to add the domain in the Applications:Utilities:Directory Uitility application.
If you are trying to connect to a Windows XP client box, the machine will automatically try to authenticate with the guest account not the username and password you are using even when "registered user" is ticked. You have to edit the registry to change this default. If the username from the Windows PC is the same as the user logon then this is why the PC is able to connect and the mac is not.

ORA-28545: error diagnosed by Net8 when connecting to an agent error

Hi,
I've to setup the Oracle Gateway service in order to access the SQL Server 2005 db from Oracle11g 11.1.0.7.0 db which is running on a LINUX os.
Basically, i've to periodically PULL data from SQL Server to oracle.
Have done the necessary setup as specified in Oracle docs.
1. Oracle ini file: initdg4msql.ora
HS_FDS_CONNECT_INFO=999.168.0.1:1433//SqlServerDb
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_RECOVERY_ACCOUNT=sqlserver_user_id
HS_FDS_RECOVERY_PWD=sqlserver_user_password
2. listener.ora entry
LISTENER_GATEWAY =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = oracle.portal.internal)(PORT = 1522))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = OBIM1)
(ORACLE_HOME = /app/oracle/product/11.1.0/db_1)
(SID_DESC =
(SID_NAME = dg4msql)
(ORACLE_HOME = /app/oracle/product/11.1.0/db_1)
(ENVS=LD_LIBRARY_PATH=/app/oracle/product/11.1.0/db_1/dg4msql/driver/lib;/app/oracle/product/11.1.0/db_1/lib)
(PROGRAM = dg4msql)
3. tnsnames.ora entry
dg4msql =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = tcp)(HOST = oracle.portal.internal)(PORT = 1522))
(CONNECT_DATA =(SID = dg4msql))
(HS = OK)
4. Create database link on oracle
create public database link sqlserver connect to "sqlserver_user_id" identified by "sqlserver_user_password" using 'dg4msql';
Database link created.
Upon the completion of the configuration, I did the following and all are successful and working:
- starting the listener by
lsnrctl start LISTENER_GATEWAY
- tnsping my gateway
tnsping dg4msql
However, when I tried to retreive data and got the following error:
SQL> desc myTestingTable@sqlserver;
ERROR:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from SQLSERVER
I have stepped through the doc of "How to Setup DG4MSQL (Oracle Database Gateway for MS SQL Server) Release 11" but unable to figure out where the error lies.
Any inputs on this?? please help, I am in urgent.

Hi Mike,
As suggested, I have tried both formats with the spaces at the front. When I tried to start the listener, still get the error as show below:
Starting /app/oracle/product/11.1.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.1.0.7.0 - Production
System parameter file is /app/oracle/product/11.1.0/db_1/network/admin/listener.ora
Log messages written to /app/oracle/diag/tnslsnr/p1db01/listener_gateway/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle.portal.internal)(PORT=1522)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1522)))
TNS-01155: Incorrectly specified SID_LIST_LISTENER_GATEWAY parameter in LISTENER.ORA
NL-00305: the specified path name does not exist
As answers to your points -
- you have the HOST defined as -
(HOST = oracle.portal.internal)
is this the actual host name or did you change it to hide it in the post ?
*** It is just a mark up host for security reason
- what happens if you use the IP address instead of the hostname ?
*** Have tried the IP address but same error
- is the gateway installed in the directory /app/oracle/product/11.1.0/db_1 ?
*** Yes
- can you set up listener level 16 tracing and check the trace file for further information about the errors ? Add this to the listener.ora file -
trace_level_listener=16
and start the listener.
*** Have added the trace level 16 and tried to start the listener but same error. Please refer the snapshot from the log.xml. Please note that the host_id "oracle" is just a make-up.
<txt>Listener completed notification to CRS on start
</txt>
</msg>
<msg time='2010-04-17T15:37:56.544+10:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oracle'
host_addr='99.999.99.99'>
<txt>
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
</txt>
</msg>
<msg time='2010-04-17T15:37:56.545+10:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oracle'
host_addr='10.254.84.32'>
<txt>TNS-01155: Incorrectly specified SID_LIST_LISTENER_GATEWAY parameter in LISTENER.ORA
NL-00305: the specified path name does not exist
</txt>
</msg>
- I have repeated the same steps above by changing the SID_LIST_LISTENER_GATEWAY back to SID_LIST_LISTENER parameter in LISTENER.ORA
The listener can be started but back to square one with ORA-28545 error as show below:
SQL> desc myTestingTable@sqlserver;
ERROR:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from SQLSERVER
Thanks

Once again - ORA-28545: error diagnosed by Net8 when connecting to an agent

I'm trying to connect to a SQL server 2012
I've make the ODBC connections (called MOFIBO2, MOFIBO3, MOFIBO4) and i've a succesfull connection to then SQL server.
The Oracle Database is:
Oracle Database 11g Release 11.2.0.3.0 - 64bit Production
I've made 3 versions of the initdg4odbc.ora and they all look the same:
# This is a sample agent init file that contains the HS parameters that are
# needed for the Database Gateway for ODBC
# HS init parameters
HS_FDS_CONNECT_INFO = MOFIBOx (MOFIBO2, MOFIBO3 and MOFIBO4)
HS_FDS_TRACE_LEVEL = off
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
My lisener.ora look like this:
# listener.ora Network Configuration File: C:\app\Administrator\product\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = resp-ora01)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
   (SID_NAME = PLSExtProc)
   (ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)
   (PROGRAM = extproc)
(SID_DESC =
   (ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)
   (SID_NAME = RESPTEST)
(SID_DESC =
   (SID_NAME=MOFIBO2)
   (ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)
   (PROGRAM = dg4odbc)
(SID_DESC =
   (SID_NAME=MOFIBO3)
   (ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)
   (PROGRAM = dg4odbc)
(SID_DESC =
   (SID_NAME=MOFIBO4)
   (ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)
   (PROGRAM = dg4odbc)
ADR_BASE_LISTENER = C:\app\Administrator\product\11.2.0\dbhome_1\log
And my mofibo part of then tnsnames.ora look like this (I've made three variants because different "manuals" uses different methods ):
MOFIBO2=
(DESCRIPTION=
   (ADDRESS=(PROTOCOL=TCP)(HOST=resp-ora02)(PORT=1521))
   (CONNECT_DATA=
    (SID=MOFIBO2)
   (HS=OK)
MOFIBO3=
(DESCRIPTION=
   (ADDRESS=(PROTOCOL=TCP)(HOST=resp-ora02)(PORT=1521))
   (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SID_NAME = MOFIBO3)
   (HS=OK)
MOFIBO4=
(DESCRIPTION=
   (ADDRESS=(PROTOCOL=TCP)(HOST=resp-ora02)(PORT=1521))
   (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = MOFIBO4)
   (HS=OK)
When tnsping to the three versions i get this:
C:\Users\Administrator>tnsping mofibo2
TNS Ping Utility for 64-bit Windows: Version 11.2.0.3.0 - Production on 24-APR-2014 12:48:17
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Used parameter files:
C:\app\Administrator\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=TCP)(HOST=resp-ora02)(PORT=1521)) (CONNECT_DATA= (SID=MOFIBO2)) (
HS=OK))
OK (10 msec)
C:\Users\Administrator>tnsping mofibo3
TNS Ping Utility for 64-bit Windows: Version 11.2.0.3.0 - Production on 24-APR-2014 12:48:23
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Used parameter files:
C:\app\Administrator\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=TCP)(HOST=resp-ora02)(PORT=1521)) (CONNECT_DATA = (SERVER = DEDIC
ATED) (SID_NAME = MOFIBO3)) (HS=OK))
OK (10 msec)
C:\Users\Administrator>tnsping mofibo4
TNS Ping Utility for 64-bit Windows: Version 11.2.0.3.0 - Production on 24-APR-2014 12:48:27
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Used parameter files:
C:\app\Administrator\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=TCP)(HOST=resp-ora02)(PORT=1521)) (CONNECT_DATA = (SERVER = DEDIC
ATED) (SERVICE_NAME = MOFIBO4)) (HS=OK))
OK (0 msec)
I created three database link with then following (username and password was in wright case):
create database link MOFIBODB2 connect to "<username>" identified by "<password>" using 'MOFIBO2';
create database link MOFIBODB3 connect to "<username>" identified by "<password>" using 'MOFIBO3';
create database link MOFIBODB4 connect to "<username>" identified by "<password>" using 'MOFIBO4';
when i was trying to select from a table (select * from customers@<DATABASELINKHERE>) i get the errors (substitute MOFIBO2 with MOFIBO3/4 and same error occours):
SQL> select * from customers@MOFIBODB2;
select * from customers@MOFIBODB2
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from MOFIBODB2
What is my mistake?

Hi,
In the listener.ora you have the host as -
(HOST = resp-ora01)
but in the tnsnames.ora entries you have -
(HOST=resp-ora02)
The tnsnames.ora host must be the same as the listener host.
Unless you have a listener running on resp-ora02 it isn't clear why the tnsping returns a result.
Change the host in the tnsnames.ora and let us know what happens.
Regards,
Mike

Time Machine: Backup folder changing size when connected to different computers

Can someone please help me wrap my head around why the size of my Time Machine backup folder changes when connected to different computers? I tried to be as thorough as possible. Thanks in advance for taking the time to read this.
I made a backup of my one laptop (MacBook Pro running 10.6.8) before installing Mavericks. The backup folder size is 258.56 GB and it is on a 1TB WD external. There are no other computers backed up in this folder.
Last night, I tried to copy the backup folder to another 1TB WD external and ran into the “you can’t do that” message. After some researching, I came across articles explaining how Time Machine handles HDs and, in order for me to copy my backup folder, the drive I want to copy the folder to needs to have the “Ignore ownership on this volume” deselected.
Okay, so here is my situation: I have the “Ignore ownership on this volume” deselected and journaling is correct on the drive I want to copy the backup folder to. So I can continue working on my laptop, I want to use a different computer to copy the backup folder from one HD to the other. The problem I’m having is each computer I own is showing me a different backup folder size O.o.
(1) The computer I want to use – a Power Mac G5 Quad running 10.4.11 (non intel) – is showing a backup folder size of 592.7 MB, but the HD shows there is 258 GB being used. When I drag copy, I only get a 592.7 MB backup folder. For some reason, the backup folder is the only folder acting this way. I compared other folders from the same and different externals and all the sizes match up perfectly no matter the computer they were connected to. How is this possible?
(2) My second option - Mac Pro (early 2009) running 10.9.4 – is showing a 256.15 GB backup folder size. Very close, but not 258.56 GB.
(3) My last option is to use the computer I’m trying to stay away from, the MacBook Pro running 10.6.8. This is the computer I backed up and is showing me the correct folder size = 258.56GB. As I mentioned, I'd like to work on my laptop while copying the backup folder using one of my other computers.
I am able to drag and drop from each computer, but the folder size depends on the computer I’m using. I don’t understand why I can't do a simple drag and drop of a 258 GB folder.
Many thanks!!

The directory files that you are seeing are not real. They are links to the actual backup files that are stored in a hidden directory on the drive. If you were to look at the same drive on a pc, you would see the folders and you would a list files that are in the folders but the files would all be 0 byte files and Windows will tell you the file is empty because there is nothing there but a link which Windows does not understand.
So the point is you can't just copy the backupd files. The best solution that I know of (and maybe someone else will chime in) for copying them is to mirror the drive with something like Carbon Copy or some other program.
See this site for more information about time machine and how it works: http://pondini.org/OSX/Home.html

Essbase Error(1021001) Failed to Establish Connection With SQL Database...?

Hi there!
I am very new in Essbase and I am receiving the error message quoted below while trying to load data in a Cube. Weird thing is that we have checked all connections already and they are working correctly, however this process is still failing.
If someone can give us an idea to troubleshoot it, that would be really appreciated.
Thanks very much in advance for any help and regards!
MAXL> deploy data from model 'Production_GL_Cube_SchemaModel' in cube schema '\Production_GL\Cube_Schemas\Production_GL_Cube_Schema' login AdminUserAccount identified by MyPassword on host 'ServerName.MyCompany.com' to application 'ORA_HFM' database 'GL' overwrite values using connection 'ServerName' keep all errors on error ignore dataload write 'E:\Logs\DataLoad_Error_2013.04.19.16.23.00.txt';
BPM Connect Status: Success
Failed to deploy Essbase cube. Caused by: Failed to load data into database: GL. Caused by: Cannot get async process
state. Essbase Error(1021001): Failed to Establish Connection With SQL Database Server. See log for more information
BPM maxl deployment ...failure.

Hi Celvin,
Thanks for your reply and my apologies for not coming back before on this issue.
For the benefit of other readers, after hours struggling with the issue, we focused our attention in the following portion of the ORA_HFM.log file:
[Sat Apr 20 11:48:34 2013]Local/ORA_HFM/GL/Service_Acct@Native Directory/54996/Info(1013157)
Received Command [Import] from user [Service_Acct@Native Directory] using [GL.rul] with data file [SQL]
[Sat Apr 20 11:48:34 2013]Local/ORA_HFM/GL/Service_Acct@Native Directory/8964/Info(1021041)
Connection String is [DRIVER={DataDirect 6.1 Oracle Wire Protocol};Host=MyEssbaseServer01.MyCompany.com;Port=1521;SID=PRODUCTION;UID=...;PWD=...;ArraySize=1000000;]
[Sat Apr 20 11:48:34 2013]Local/ORA_HFM/GL/Service_Acct@Native Directory/8964/Info(1021006)
SELECT Statement [SELECT cp_127."ACCT" AS "Accounts_CHILD",
         cp_127."PERIOD_MEMBER" AS "Period_CHILD",
         cp_127."PERIOD_YEAR" AS "Years_CHILD",
         'INPUT' AS "View_CHILD",
         cp_127."ENTITY" AS "Entity_CHILD",
         cp_127."PRODUCT_LINE" AS "Custom1_Product_CHILD",
         cp_127."Function" AS "Custom4_Function_CHILD",
         cp_127."B_U" AS "Business_Unit_ORACLEBUSINESS",
         cp_127."ORACLEFUNCTION" AS "Oracle_Function_CHILD",
         cp_127."LEGALENTITY" AS "Oracle_Entity_CHILD",
         'P' || cp_127."PRODUCTLINE" AS "Oracle_Product_CHILD",
         'A'[Sat Apr 20 11:48:34 2013]Local/ORA_HFM/GL/Service_Acct@Native Directory/8964/Info(1021043)
Connection has been established
[Sat Apr 20 11:48:34 2013]Local/ORA_HFM/GL/Service_Acct@Native Directory/8964/Info(1021044)
Starting to execute query
[Sat Apr 20 11:48:34 2013]Local/ORA_HFM/GL/Service_Acct@Native Directory/8964/Info(1021013)
ODBC Layer Error: [S1000] ==> [[DataDirect][ODBC Oracle Wire Protocol driver][Oracle]ORA-04063: view "REP_ESSBASE.VW_GL_BALANCES" has errors]
[Sat Apr 20 11:48:34 2013]Local/ORA_HFM/GL/Service_Acct@Native Directory/8964/Info(1021014)
ODBC Layer Error: Native Error code [4063]
[Sat Apr 20 11:48:34 2013]Local/ORA_HFM/GL/Service_Acct@Native Directory/8964/Error(1021001)
Failed to Establish Connection With SQL Database Server. See log for more information
[Sat Apr 20 11:48:34 2013]Local/ORA_HFM/GL/Service_Acct@Native Directory/8964/Error(1003050)
Data Load Transaction Aborted With Error [1021001]
Then we concentrated in the following error message: *ODBC Layer Error: [S1000] ==> [[DataDirect][ODBC Oracle Wire Protocol driver][Oracle]ORA-04063: view "REP_ESSBASE.VW_GL_BALANCES" has errors]*
So, we checked the database and noticed the schema and their views were damaged and -due to this- they lost all their properties (like data types, for example). So, we had to recompile all of them in order to avoid any loss of data. This was done in TOAD, as per the following info: https://support.quest.com/SolutionDetail.aspx?id=SOL66821
Finally, once all the views on this schema were rebuilt and fixed, we were able to deploy the Cube again.
Hope this help in the future. Cheers!!

Essbase Studio Error(1021001): Failed to Establish Connection With SQL Data

Hi.
I have trying to deploy a cube with Essbase Studio but I get the error: "*Error(1021001): Failed to Establish Connection With SQL Database Server*"
My environment is Linux 5, Oracle 11g and EPM 11.1.1.2. Oracle database and Essbase was installed with diferent users. In the .bash_profile of hypadmin user (that install Essbase) I have set the following variables
ORACLE_BASE=/u01/app/oracledb/product/11.1.0
ORACLE_HOME=$ORACLE_BASE/db_1
LD_LIBRARY_PATH=/usr/X11R6/lib:$ORACLE_HOME/lib:$LD_LIBRARY_PATH
ORACLE_HOSTNAME=devbi.sigfe2
PATH=$ORACLE_HOME/bin:$ORACLE_HOME/jdk/bin:$ORACLE_HOME/bin:/sbin:$ORACLE_HOME/opmn/bin:$PATH
ORACLE_SID=orcl
JAVA_HOME=/u01/app/installfiles/jdk1.5.0_19
In my pc (windows xp) I can open Essbase Studio console, do the connection to Oracle database, get tables and create minischema, mesures and hierarchies (I can see the preview of hierarchies). Also I can create cubes with EAS and can connect with MAXSHELL to essbase.
When I try to deploy the cube from Essbaes Studio y get the error "Error(1021001): Failed to Establish Connection With SQL Database Server".
The Essbase Studio Log File say:
+12:40:16 07/24/09 (admin-1) INFO Start creating outline in database "5.4.0.41:1423.POC_ESS.POC_ESS1"...+
+12:40:16 07/24/09 (admin-1) FINA Sign on Essbase by CSS token "5.4.0.41:1423" successfully...+
+12:40:16 07/24/09 (admin-1) INFO Start building dimension "DM_CIUDADES" ...+
+12:40:16 07/24/09 (admin-1) MÁS FINA Start creating rule file ...+
+12:40:16 07/24/09 (admin-1) INFO SQL statement has been created and put into rule file "/home/hypadmin/hyperion/products/Essbase/EssbaseStudio/Server/./ess_japihome/data/DM_CIU.rul"+
+12:40:16 07/24/09 (admin-1) INFO The query is "SELECT (CONCAT('reg_',CAST(cp_105."ID_REGIONPADRE" AS VARCHAR2(1000)))) as "REGION_PADRE", (CONCAT('reg_',CAST(cp_105."ID_REGION" AS VARCHAR2(1000)))) as "REGION_HIJO", cp_105."DE_REGION" as "REGION_HIJO.Default" FROM "POC"."DM_REGIONES_ESS3" cp_105 ORDER BY cp_105."DE_NIVEL" ASC, cp_105."ID_REGIONPADRE" ASC, cp_105."ID_REGION" ASC"+
+12:40:16 07/24/09 (admin-1) INFO Rule file has been created and saved as "/home/hypadmin/hyperion/products/Essbase/EssbaseStudio/Server/./ess_japihome/data/DM_CIU.rul"+
+12:40:16 07/24/09 (admin-1) FINA Essbase starts to add members to DM_CIUDADES dimensioin based on the rules file.+
+12:40:16 07/24/09 (admin-1) ADVERTENCIA (1021001): Error al establecer conexión con el servidor de bases de datos SQL. Consulte el registro para obtener más información.+
+12:40:16 07/24/09 (admin-1) ADVERTENCIA essbaseDriver.FailedToBuildDimensionException+
+12:40:16 07/24/09 (admin-1) GRAVE Unexpected exception in EssbaseExport prevented cube from being deployed+
-------------- Exception --------------
com.hyperion.cp.datasources.export.essbase.EssbaseDriverException: Failed to deploy Essbase cube
Thanks in advance to all that have any idea to help me to solve this issue.
A.S.

Hi,
If you type database SID in lowercase, try to reenter iot in uppercase. Strange, but I and my colleagues encounter this behaviour many times.

I receive an error message0xe800007f iTunes can not connect with iPhone unknown error

i receive an error message, " itunes can not connect with iphone , unknown error
" 0xe800007f
i have mac mini with lion os and iphone 4s

Make sure you have the latest version of iTunes. You can download it from here -> http://www.apple.com/itunes/download/
If that doesn't work, check out this Apple article -> iOS: Unknown error containing '0xE' when connecting to a Windows PC

Will not recognize the Lucid LG when connected with USB

My Dell will not recognize the Lucid LG when connected with USB. Both the computer and phone gives a split second prompt that they are connected but then goes away immediately. After reconnecting it several times however it will finally recognize the mass storage. How can I get away from the hassle of multiple re-connections before it finally recognizes that connection?

That's some helpful information about your issue samrmusso! Some recommendations that I have for you is to try a different USB port on the computer to see if it isn't an issue with that specific USB port. Are you using the cable that came with the device (recommended) or a 3rd party cable (may not support data transfering properly)? You can also try restarting both the device and computer and retest. It's possible that there's a driver conflict on your Dell. Here's how to check for these types of conflicts: http://goo.gl/qH4m5
Keep us posted on any additional information/details about your issue.
Thanks,
MikeS_VZW
Follow us on Twitter @VZWSupport

Error vendor code 942 when connecting with different user

Similar Messages

Maybe you are looking for