Error/Warning Messages in Agent Debug Log Files

I have noticed the following error message in the Agent Debug Log Files and was wondering if anybody could shed any light on their meaning or what might be causing them.
Warning 1855:####### ServiceEngine: Service::getPolicyResult():No passwd value in session response.
Warning 1855:####### PolicyAgent: Access Manager Cookie not found.
Error 1855:####### AM_SSO_SERVICE: SSOTokenService::getSessionInfo(): Error 18 for sso token ID <SSO_TOKEN_ID>

hi
Looks like the message numbers you are processing in the function module CRM_MESSAGE_COLLECT are only for 'errors'.
Please go to Transaction: CRMC_MSGS
Look at the following Application Areas
CRM_ORDER
CRM_ORDERADM_H
CRM_ORDERADM_I
CRM_ORDER_MISC
CRM_ORDER_OUTPUT
Select one of the above and double click 'Single Messages' towards your left side on the screen. Select the relavant message number from the list and check the 'S' flag. Press 'F1' (help) on this box and you will see the following.
Only error messages are saved in the processing log. If a message definitely should be saved - contrary to this rule - then the indicator needs to be set.
You need to make sure that a message marked like this can be deleted again - by calling up the function module CRM_MESSAGES_DELETE in the appropriate place in the program.
When you do these steps, please note the message 'Do not make any changes (SAP data)'. This is not tested and used from my side. Please see if this impacts other functions. I am not sure. Do necessary R&D before you proceed further. Please explore tables CRMC_MESSAGES_S and CRMC_MESSAGES and see if this helps.
Reward if helps
Regards
Manohar

Similar Messages

UTC Warning Message each second in log file

Hi,
i'm running a Oracle NoSQL Store (2.0.23) in a 2 node environment.
In the web admin interface under "logs" i find the message
+"UTC WARNING [rg1-rn2] Exception in ResolveHandlerThread when contacting:rg1-rn2"+
repeating each second.
A more detailled error message can be found in log-file rg1-rn2_0.log, which resides on second node of my store:
+2013-01-23 14:14:37.703 UTC WARNING [rg1-rn2] Exception in ResolveHandlerThread when contacting:rg1-rn2+
java.lang.NullPointerException
at oracle.kv.impl.util.registry.RegistryUtils.getRequestHandler(RegistryUtils.java:125)
at oracle.kv.impl.api.rgstate.RepNodeState$ReqHandlerRef.resolve(RepNodeState.java:592)
at oracle.kv.impl.api.rgstate.RepNodeState.resolveReqHandlerRef(RepNodeState.java:181)
at oracle.kv.impl.api.rgstate.RepNodeStateUpdateThread$ResolveHandler.run(RepNodeStateUpdateThread.java:395)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:662)
When validating/verifying the store (either by web interface or by CLI), everything seems to be ok.
Output from CLI (strangely no performance information from rg1-rn2, which reports messages above):
kv-> show topology
store=sicstore numPartitions=300 sequence=307
+dc=[dc1] name=SicDC repFactor=2+
+sn=[sn1] dc=dc1 than-pc:5000 capacity=1 RUNNING+
+[rg1-rn1] RUNNING+
single-op avg latency=0.041355196 ms multi-op avg latency=1.6138855 ms
+sn=[sn2] dc=dc1 10.74.10.221:5000 capacity=1 RUNNING+
+[rg1-rn2] RUNNING+
No performance info available
+shard=[rg1] num partitions=300+
+[rg1-rn1] sn=sn1+
+[rg1-rn2] sn=sn2+
kv-> topology validate
Validation for the current deployed topology:
No problems
kv->
From web interface:
Verification complete, no violations.
Is the error message resulting from a slight (< 1 sec) difference of time on both nodes? I'm not able
to sync the time on both machines via ntp, as on one of them i do not have rights to modify time
settings (system is only for training purpose).
If so, can i ignore the warning or do i have to expect some side-effects?
Thanks & Regards
Thomas

I'm updating this thread. Thomas and I have had some offline communication regarding the log files and the store. The brief summary is that it's not yet clear why this situation arose but there are some clues:
1. The 2-node store started off with a clock skew problem that caused it to not work at all
2. Thomas fixed the skew and retried the deployment plans keeping the store intact (most people tend to make a new store when this happens)
3. The store became functional but in a state where an internal thread would log a warning every second
The development team is still looking into this.
Note: the fact that Windows 7 was involved is probably not a factor.
Disclaimer: technically Oracle NoSQL Database is not supported on that platform.
Regards,
George

Internal Error has occurred. Check the log file for details.

Hello Experts,
After installing Oracle 11g R2 in Windows XP (32-bit), I get the following error message when logging into https://localhost:1158/em - "Internal Error has occurred. Check the log file for details." I have extracted the following files onto one directory and used it for installation: win32_11gR2_database_1of2.zip, win32_11gR2_database_2of2.zip, p10098816_112020_WINNT_1of6, p10098816_112020_WINNT_2of6, p10404530_112030_WINNT_1of6, p10404530_112030_WINNT_2of6. I get no errors during the install. I selected "Create and configure a database". I selected "Desktop Class". I took the default locations (in step 5). Can someone please assist me?
Thank you.

internal error occur with some java exception?. some tabs are accessed like administration and when you click on performance than you are get logout??
this is the problem which you are facing??>

How To Generate Debug Log Files for ebs jsp?

hi How To Generate Debug Log Files for ebs r12 jsp?
and where i get the log .please help me thanks!

Please check following MOS Document
Oracle Application Server Diagnostic Tools and Log Files in Applications Release 12 (Doc ID 454178.1)

Where can I get details on JDBCPool error (WARN) messages?

Where can I get details on JDBCPool error (WARN) messages?
2007-05-02 10:13:07,431 1986526969 WARN com.sct.workflow.util.jdbcpool.JDBCPool verifyConnection.295 - JDBC Connection has failed
verification.
2007-05-02 10:13:07,432 1986526970 WARN com.sct.workflow.util.jdbcpool.JDBCPool$1 run.258 - JDBC connection has failed. Removing
from available pool.
Thanks,
Glen

I received no replies to this question. That may indicate that it is an application message.

Internal Error has occurred . Check the log file for details 11g r2 on windows 8 64bit

Hi Friends,
I Have just installed on my laptop
Database : oracle 11g 64bit , on windows 8 64bit
I was successfully able to install the Database without any problem... I am able to connect from command prompt both as sys and hr user....
But when I tried to connect through EM by sys credentials...
https//localhost:1521/em
I am getting Error Internal Error has occurred . Check the log file for details....
When I checked the emoms.trc this the last few lines...
https://localhost:3938/emd/main:A००००००००३३.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 32 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:22:35,544 [MetadataLoad https://localhost:3938/emd/main:A००००००००३४.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 33 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:22:36,275 [MetadataLoad https://localhost:3938/emd/main:A००००००००३५.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 34 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:22:57,105 [MetadataLoad https://localhost:3938/emd/main:A००००००००३६.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 35 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:22:57,832 [MetadataLoad https://localhost:3938/emd/main:A००००००००३७.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 36 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:22:58,625 [MetadataLoad https://localhost:3938/emd/main:A००००००००३८.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 37 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:23:02,529 [MetadataLoad https://localhost:3938/emd/main:A००००००००३९.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 38 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:23:03,307 [MetadataLoad https://localhost:3938/emd/main:A००००००००४०.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 39 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:23:04,107 [MetadataLoad https://localhost:3938/emd/main:A००००००००४१.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 40 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
Thanks and Regards

You could try reading what I said: change the port in the URL to 1158.
My release of windows is this,
c:\Users\John>ver
Microsoft Windows [Version 6.2.9200]
c:\Users\John>
You can ignore that junk about editions.
And by the way, there is a problem with your keyboard, it keeps inserting multiple "...." character strings.

What is the extension for debug log file name?

Hi,
1) Please let me know what is the extension for debug log file....
is it .dbg or .log ?
in one of the sr the service engineer asked to put .log as the extension is this correct?
here is what he said...
a) Enable the following Profiles at user level:
OM: Debug Level = 5
INV: Debug Trace = YES
INV: Debug Level = 11
INV: Debug File = [directory value from above query]/logfilename.log
(make sure that you have write permission for this file and directory)
WSH: Debug Enabled - Yes
WSH: Debug Level - Statement
2) do the end-user (for whom trace is enabled) need to have read and write permissions on the directory and the log file?
Thanks
Raju

user652672 wrote:
1) Please let me know what is the extension for debug log file....
is it .dbg or .log ?
INV: Debug File = [directory value from above query]/logfilename.log
(make sure that you have write permission for this file and directory) It is what you set in the value of "INV: Debug File" profile option (according to the above value, it will be logfilename.log).
2) do the end-user (for whom trace is enabled) need to have read and write permissions on the directory and the log file?No, just make sure the directory is writable by the oracle and applmgr users.

I'm getting 100s of debug.log. files on my macbook OS 10.7.5. I've never seen them before. Should I be worried? They look like this: debug.log.100100_100119.sent. Is it an encryption problem? thanks for any help!

I'm getting 100s of debug.log. files on my macbook OS 10.7.5. I've never seen them before. Should I be worried? They look like this: debug.log.100100_100119.sent. Is it an encryption problem? thanks for any help!

I'm getting 100s of debug.log. files on my macbook OS 10.7.5. I've never seen them before. Should I be worried? They look like this: debug.log.100100_100119.sent. Is it an encryption problem? thanks for any help!

Bursting Program Errors Out with nothing in the Log file

Hi All
I have a RDF which calls a bursting program in After report trigger, the problem i'm facing is that the bursting program is completing successfully for a set of parameters and when again the program is run for the same set of parameters the bursting program is ending in error, i have checked the log file but nothing in the log file
below is my log file
+---------------------------------------------------------------------------+
XML Publisher: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XDOBURSTREP module: XML Publisher Report Bursting Program
+---------------------------------------------------------------------------+
Current system time is 30-SEP-2013 15:11:15
+---------------------------------------------------------------------------+
XML/BI Publisher Version : 5.6.3
Request ID: 574533
All Parameters: Dummy for Data Security=N:ReportRequestID=574532:DebugFlag=Y
Report Req ID: 574532
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:T1DEVEBSAPP1
Preparing parameters
null output =/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574533.out
inputfilename =/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574532.out
Data XML File:/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574532.out
Set Bursting parameters..
Temp. Directory:/tmp
[093013_031118656][][STATEMENT] Oracle XML Parser version ::: Oracle XML Developers Kit 10.1.3.130 - Production
[093013_031118657][][STATEMENT] setOAProperties called..
Bursting propertes.....
{user-variable:cp:territory=US, user-variable:cp:ReportRequestID=574532, user-variable:cp:language=en, user-variable:cp:responsibility=20678, user-variable.OA_MEDIA=http://t1devebsapp1.travelzoo.com:8001/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=574532, user-variable:cp:locale=en-US, user-variable:cp:user=SETUPUSER, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=574533, user-variable:cp:org_id=81, user-variable:cp:reportdescription=Travelzoo Invoice Print Selected Invoices-Child, user-variable:cp:Dummy for Data Security=N}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
602
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 30-SEP-2013 15:11:41
+---------------------------------------------------------------------------+
and the output says..
"Error!! Could not deliver the output for Delivery channel:null "
Wondering What might be the issue, any help on this is greatly appreciated.
-Ragul

Can you find any details about the error from the "View Detail" button (the same window where you check the log and output files)?
I found the Workflow logs, I am not sure what I am looking for, but i am not seeing any errors reported.The event viewer is supposed to send an email, so do you see anything in the logs that could be related?
Thanks,
Hussein

Log Reader Agent: transaction log file scan and failure to construct a replicated command

I encountered the following error message related to Log Reader job generated as part of transactional replication setup on publisher. As a result of this error, none of the transactions propagated from publisher to any of its subscribers.
Error Message
2008-02-12 13:06:57.765 Status: 4, code: 22043, text: 'The Log Reader Agent is scanning the transaction log for commands to be replicated. Approximately 24500000 log records have been scanned in pass # 1, 68847 of which were marked for replication, elapsed time 66018 (ms).'.
2008-02-12 13:06:57.843 Status: 0, code: 20011, text: 'The process could not execute 'sp_replcmds' on ServerName.'.
2008-02-12 13:06:57.843 Status: 0, code: 18805, text: 'The Log Reader Agent failed to construct a replicated command from log sequence number (LSN) {00065e22:0002e3d0:0006}. Back up the publication database and contact Customer Support Services.'.
2008-02-12 13:06:57.843 Status: 0, code: 22037, text: 'The process could not execute 'sp_replcmds' on 'ServerName'.'.
Replication agent job kept trying after specified intervals and kept failing with that message.
Investigation
I could clearly see there were transactions waiting to be delilvered to subscribers from the followings:
SELECT * FROM dbo.MSrepl_transactions -- 1162
SELECT * FROM dbo.MSrepl_commands -- 821922
The following steps were taken to further investigate the problem. They further confirmed how transactions were in queue waiting to be delivered to distribution database
-- Returns the commands for transactions marked for replication
EXEC sp_replcmds
-- Returns a result set of all the transactions in the publication database transaction log that are marked for replication but have not been marked as distributed.
EXEC sp_repltrans
-- Returns the commands for transactions marked for replication in readable format
EXEC sp_replshowcmds
Resolution
Taking a backup as suggested in message wouldn't resolve the issue. None of the commands retrieved from sp_browserreplcmds with mentioned LSN in message had no syntactic problems either.
exec sp_browsereplcmds @xact_seqno_start = '0x00065e220002e3d00006'
In a desperate attempt to resolve the problem, I decided to drop all subscriptions. To my surprise Log Reader kept failing with same error again. I thought having no subscription for publications log reader agent would have no reason to scan publisher's transaction log. But obviously I was wrong. Even adding new log reader using sp_addLogreader_agent after deleting the old one would not be any help. Restart of server couldn't do much good either.
EXEC sp_addlogreader_agent
@job_login = 'LoginName',
@job_password = 'Password',
@publisher_security_mode = 1;
When nothing else worked for me, I decided to give it a try to the following procedures reserved for troubleshooting replication
--Updates the record that identifies the last distributed transaction of the server
EXEC sp_repldone @xactid = NULL, @xact_segno = NULL, @numtrans = 0, @time = 0, @reset = 1
-- Flushes the article cache
EXEC sp_replflush
Bingo !
Log reader agent managed to start successfully this time. I wish if I could have used both commands before I decided to drop subscriptions. It would have saved me considerable effort and time spent re-doing subscriptions.
Question
Even though I managed to resolve the error and have replication funtioning again but I think there might have been some better solution and I would appreciate if you could provide me some feedback and propose your approach to resolve the problem.

Hi Hilary,
Will the below truncate the log file marked for replication, is there any data loss, when we execute this command, can you please help me understand, the internal working of this command.
EXEC sp_repldone @xactid = NULL, @xact_segno = NULL, @numtrans = 0, @time = 0, @reset = 1

RAISEERROR not shown in Agent Job Log File Viewer

I use a RAISEERROR for a critical error in a CATCH. When the Job is run, it does fail but it gives the following message. How do i get my @Note to show in the Log File Viewer? Also, where is the log referenced 'WITH LOG'. I looked at the SQL Server Agent
Log and did not see anything.
Message
Executed as user: NT AUTHORITY\SYSTEM. TCP Provider: The specified network name is no longer available. [SQLSTATE 08S01] (Error 64) Communication link failure [SQLSTATE 08S01] (Error 64). The step failed.
DECLARE @Note VARCHAR(500) = 'RAISEERROR due to Critical error'
RAISERROR (@Note, 20, 127) WITH LOG

It says Target Local Server. I scripted out the job and proc and ran them on another SQL Server 2008 R2 and I got the expected results. Maybe the test SQL Server 2008 R2 environment I am using has some quirks (for lack of a more technical term)
@VERSION on SQL Server where I get the [SQLSTATE 08S01] (Error 64)
Microsoft SQL Server 2008 R2 (RTM) - 10.50.1600.1 (Intel X86) Apr 2 2010 15:53:02 Copyright (c) Microsoft Corporation Standard Edition on Windows NT 5.2 <X86> (Build 3790: Service Pack 2) (Hypervisor)
@VERSION on SQL Server where I get expected results
Microsoft SQL Server 2008 R2 (RTM) - 10.50.1600.1 (Intel X86) Apr 2 2010 15:53:02 Copyright (c) Microsoft Corporation Developer Edition on Windows NT 6.0 <X86> (Build 6002: Service Pack 2) (Hypervisor)
BELOW are the scripted out job and proc that I have been using to test the RAISERROR
-- scripted out job
USE [msdb]
GO
/****** Object: Job [AATEST] Script Date: 12/15/2013 16:15:09 ******/
IF EXISTS (SELECT job_id FROM msdb.dbo.sysjobs_view WHERE name = N'AATEST')
EXEC msdb.dbo.sp_delete_job @job_id=N'2dd36995-fde6-491c-b4e2-85e8bdea6411', @delete_unused_schedule=1
GO
USE [msdb]
GO
/****** Object: Job [AATEST] Script Date: 12/15/2013 16:15:09 ******/
BEGIN TRANSACTION
DECLARE @ReturnCode INT
SELECT @ReturnCode = 0
/****** Object: JobCategory [[Uncategorized (Local)]]] Script Date: 12/15/2013 16:15:09 ******/
IF NOT EXISTS (SELECT name FROM msdb.dbo.syscategories WHERE name=N'[Uncategorized (Local)]' AND category_class=1)
BEGIN
EXEC @ReturnCode = msdb.dbo.sp_add_category @class=N'JOB', @type=N'LOCAL', @name=N'[Uncategorized (Local)]'
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
END
DECLARE @jobId BINARY(16)
EXEC @ReturnCode = msdb.dbo.sp_add_job @job_name=N'AATEST',
@enabled=1,
@notify_level_eventlog=0,
@notify_level_email=0,
@notify_level_netsend=0,
@notify_level_page=0,
@delete_level=0,
@description=N'No description available.',
@category_name=N'[Uncategorized (Local)]',
@owner_login_name=N'FNXXX\eME', @job_id = @jobId OUTPUT
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
/****** Object: Step [STEP1] Script Date: 12/15/2013 16:15:09 ******/
EXEC @ReturnCode = msdb.dbo.sp_add_jobstep @job_id=@jobId, @step_name=N'STEP1',
@step_id=1,
@cmdexec_success_code=0,
@on_success_action=1,
@on_success_step_id=0,
@on_fail_action=2,
@on_fail_step_id=0,
@retry_attempts=0,
@retry_interval=0,
@os_run_priority=0, @subsystem=N'TSQL',
@command=N'EXEC aap1test',
@database_name=N'Store01',
@flags=0
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
EXEC @ReturnCode = msdb.dbo.sp_update_job @job_id = @jobId, @start_step_id = 1
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
EXEC @ReturnCode = msdb.dbo.sp_add_jobserver @job_id = @jobId, @server_name = N'(local)'
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
COMMIT TRANSACTION
GOTO EndSave
QuitWithRollback:
IF (@@TRANCOUNT > 0) ROLLBACK TRANSACTION
EndSave:
GO
-- scripted out proc
USE [Store01]
GO
/****** Object: StoredProcedure [dbo].[aap1test] Script Date: 12/15/2013 16:17:19 ******/
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[aap1test]') AND type in (N'P', N'PC'))
DROP PROCEDURE [dbo].[aap1test]
GO
USE [Store01]
GO
/****** Object: StoredProcedure [dbo].[aap1test] Script Date: 12/15/2013 16:17:19 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[aap1test]
AS
BEGIN
RAISERROR ('************ i am here', 20, 127) WITH LOG -- bxg
END
GO

Is there a debug log file for iTunes "Add to Library" failures?

I have an odd movie file (mp4, h264, AAC) that iTunes will not import. I transcode, tag and import videos all the time but this one fails silently on import. I've tried the drag n drop, import to library and auto-import folder methods. Nada. It plays fine in the standalone quicktime player, so it is somewhat compatible.
Does anyone know if and where iTunes logs these failures? I've been poking around the console app logs but cannot find anything. I'd love to know why it is rejecting it. I suspect it is a compatibility issue.
Thanks
Drew

Thanks for the reply Jim. Yes I did notice this option, it wasn't too attractive to me as it claimed the 2.5gb 720p file would be 5.5Gb after this processing! A gave it a shot anyway, but keep getting an error - "This operation cannot be completed (OSStatus error 38.)". Have to google that one some....
It's not the end of the world if I can't import this one into iTunes. But it did make me a little surprised about the seemingly complete lack of debug logging for the application. With Apple's focus on user experience, the completely silent rejection of this file, with no feedback or error message is not right.
Cheers
Drew

Errors in Ultra Search crawler's log file

Hi all,
I'm trying to configure Ultra Search to do advanced search on a set of attributes of my Portal items.
After executed Synchronization Schedule in the Ultra Search Administration Tool, I found these in the Crawler Progress Summary:
Documents to Fetch 0
Documents Fetched 284
Document Fetch Failures 0
Documents Rejected 0
Documents Discovered 284
Documents Indexed 59
Documents non-indexable 225
Document Conversion Failures 0
The number of non-indexable documents are 225 while the indexed documents are only 59. Then I looked into the Crawler's log file and found that all the almost processes tried to index Portal items got errors. The errors look like:
http://winas10g.tinhvan.com/pls/portal/PORTAL.wwsbr_srchxml.execute?p_action=generate_item&p_thingid=276935&p_siteid=753&p_result_lang=en: Portal server returned an error message.
Documents to process = 0
Error message returned from Portal server is: User-Defined Exception.
The successful processed documents look like:
Documents to process = 186
Processing http://winas10g.tinhvan.com/pls/portal/PORTAL.wwsbr_srchxml.execute?p_action=generate_item&p_thingid=276386&p_siteid=753
Total documents successfully processed = 86
Documents to process = 185
Then when I performed search, I just can find the text that appear directly on Portal pages with URL address format: http://host:port/pls/portal/url/PAGE/pagegroup_name/page_name.
Is there any error with my Utra Search configuration here? How can I index all the Portal items along with their attributes?
Thanks,
Vietdt

Liya
The log file for the crawler schedule should be explicitly listed in the information for the schedule. Please check the information for that schedule.
This log file will be located in the log directory that you've specified in the "crawler" tab.
Please locate the log file and let us know what you see in that.
thanks
edward

Lots of Bonjour Service errors 100 in my windows 7 log file

Hi there!
I have two windows 7 PC's, and both of them have a *lot* of errors 100 in the log files.
Most of them look like "Warning: Removed port mapping request 0101497C Prot 2 Int 9970 TTL 7200 duplicates existing port mapping request 0068EADC Prot 2 Int 9970 TTL 7200", where the 7200 sometimes is a 0.
Tried to open port 5353 in my Norton Internet Security, but after downloading BonjourPSsetup.exe and running it and rebooting, the problem persists.
I use Bonjour for ServeToMe, to stream to my iPad 1.
How come there are so many errors and how do I fix them and prevent them happening again?
Kind regards,
Eelco

I just google with "ORA-44003: invalid SQL name" and found below link:
http://www.oracle-base.com/articles/10g/dbms_assert_10gR2.php
SIMPLE_SQL_NAME
The SIMPLE_SQL_NAME function checks the input string conforms to the basic characteristics of a simple SQL name:
The first character of the name is alphabetic.
The name only contains alphanumeric characters or the "_", "$", "#"
Quoted names must be enclosed by double quotes and may contain any characters, including quotes provided they are represented by two quotes in a row ("").
The function ignores leading and trailing white spaces are ignored
The length of the input string is not validated.

WD app Deployment Error - Where can we find J2ee log file for linux install

Hi,
I have a problem with deploying a web dynpro application. There are no errors before deployment but when I deploy the application, I get a deployment error with the following description.
I tried to view the trace or log file but we have SAP installed on a linux OS and I do not know where can we see the log or trace file. Please help.
Version:
SAP NW 2004s SP15
NWDS 7.0
xRPM 4.5
Error Description:
May 14, 2008 12:49:50 AM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager)
[Thread[Deploy Thread,5,main]] ERROR:
[008]Deployment aborted
Settings
SDM host : BS307
SDM port : 50718
URL to deploy : file:/C:/DOCUME1/SMULLA1/LOCALS~1/Temp/2/temp20045SempraDemo4.5.ear
Result
=> deployment aborted : file:/C:/DOCUME1/SMULLA1/LOCALS~1/Temp/2/temp20045SempraDemo4.5.ear
Aborted: development component 'SempraDemo4.5'/'local'/'LOKAL'/'0.2008.05.14.00.49.36'/'0':Caught exception during application deployment from SAP J2EE Engine's deploy service:java.rmi.RemoteException: Cannot deploy application local/SempraDemo4.5.. Reason: Clusterwide exception: Failed to deploy application local/SempraDemo4.5. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is: com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application local/SempraDemo4.5. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine? (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment exception : The deployment of at least one item aborted
Edited by: Subramanya Srinivas Mullapudi on May 14, 2008 8:34 AM

Hi Reza,
Hope you are doing good.
You can set the trace level in the SAP/Java Gui dynamically :
Call transaction SMICM
Choose the menu Goto → Trace Level → Set
In the pop-up window, set the desired level (0,1,2,3)
To switch on an /nSMICM or ICM HTTP trace via command line you should go to
usr\sap\<SID>\<instance_number>\exe directory and run the icmon program with the following command:
icmon◦◦pf=\usr\sap\<SID>\SYS\profile\<SID>_<instance_name>_<HOST>
where you fill in the SID, instance name and host corresponding to your system.
The icmon program is interactive and to increase trace level you must write
"+" and pres enter.To quit you must write "q" and press enter.
The trace will be written◦to the following file: usr\sap\<SID>\<instance_number>\work\dev_icm
Thank you!
Kind Regards,
Hemanth
SAP AGS

Error/Warning Messages in Agent Debug Log Files

Similar Messages

Maybe you are looking for