Error/Warning while validating a mapping

I'm using OWB version 9.2 and database 9i.
I have few major problems in OWB. We have stage and star schemas on the same database instance. The source system is on a different database instance. There are database links created between target instance to source.
I have about 20 mappings; all validated, deployed and executed successfully about 2 weeks back.
Beginning of this week I logged on to OWB and tried to make some changes to one of the mappings. Before I made changes I tried to validate the mapping and I got following warnings:
"VLD-1008: Referenced mapping column <COLUMN_NAME> does not exist"
"VLD-1003: Reference <COLUMN_NAME> between mapping object and repository object does not exist".
When I click on "View Details" it says I need to reconcile outbound of the staging table.
When I have not made any changes to the mapping why do I need to do this? I want to know under what circumstances do we get this message?
Another weird thing is I validated the mapping, after 15 minutes I tried to deploy this and still got the above warnings, although I had reconciled outbound and successfully validated the mapping. Am I missing something here?
Another problem is I have a mapping which loads a dimension from staging table. Very simple basic mapping all it does is dumps from staging table to dimension and key is generated by sequence generator. Both stage and star schemas are on the same database instance. When I try to validate this mapping it gives me error:
"VLD-2769: Database link is not allowed for data target <DIMENSION_NAME>" and when I click view details it shows following:
"Loading of data across database link is not supported. Deploy this mapping within the same database instance as the actual target and remove the database link access specification from the physical configuration of this data target operator."
I have not specified any database link or schema name in the mapping configuration; both stage and star schemas are on same instance. Although there are two instances that it works fine. First if I provide the schema name in the mapping configuration it gives me warning but deploys and executes fine. Secondly if I go to deployment manager, select the mapping and click deploy it validates successfully. Why do I get this error when I validate in the mapping editor?
I never had these problems before; all the mappings were validated, deployed and executed successfully.
I would like to know where/what could have gone wrong? Could any of you point me in the right direction? Any help would be greatly appreciated.
Thanks

hi.
ok look i also had this errors:
"VLD-1008: Referenced mapping column <COLUMN_NAME> does not exist"
"VLD-1003: Reference <COLUMN_NAME> between mapping object and repository object does not exist".
this errors could be due to that something has change in the source database, in this case could be that somebody change the name column since the last time you did the load.
A possible solution is that you open the mapping (edit) and reconcile the tables both the table "from"(where the table came) and the table "to"(the table destination).
ooh and check the source system for any table that has changed, if it changed, so you have to load again the table.
bye

Similar Messages

Error VLD-1108 while validating the mapping in owb 11g

Hi All,
I am using owb 11.1.0.7.0. I am new to owb 11g. I am getting the following error while validating the mapping
error: VLD-1108 . Operator requires more input or output connections in order to generate mapping code.
I am using a function as operator and mapping it with the table.
Please tell me the solution for this. Its urgent
Thanks in advance,
Siva

Hi,
u must be using a procedure or table function that is called in the mapping for execution. When writing the function u would have specified 3 inputs but in the mapping u would have given only 2. check the number of inputs and make sure they match.
Regards
Bharadwaj Hari

INS-08109 Unexpected error occurred while validating inputs at state nodeselection page

Scenerio: We have 4 node 11gr2 RAC cluster and Trying to install RAC Database software only on two nodes
Getting warning on run Installer Page INS-08109 Unexpected error occurred while validating inputs at state nodeselection page while selecting two nodes out of four and even after confirming it comes back to same screen ....
Example ... RAC node A,B,C,D and clusterware is up and running on all four nodes .....
Trying to Install RAC database on node C,D ... Getting INS-08109 Unexpected error occurred while selecting C,D Node out of Four nodes ...A,B,C,D

Very stupid installer !
I've omitted my email, then pressed no in the next message, it passed that step!

Can't save BISM file pointing to excel sheet (data source). ErrMsg: "There were errors found while validating the page: Cannot connect to the server or database."

Hi,
Me and a collegue is administrering our new enterprise BI portal in SharePoint 2013 (On Premise) and have a problem with using a specific Excel file including general ledger data as data source through a BISM file.
This particular BISM file can't be saved without getting the error message "There were errors found while validating the page: Cannot connect to the server or database."
BISM files against other Excel sheets and sources (for example SSAS tabular databases) works well.
Can anyone help us pinpointing whats wrong here, this is a really important stakeholder in our organization requesting this reporting?
Cheers!

Hi E.SWARD ,
My self created a Power pivot excel then i want to use this excel to create BI file . Still i am getting the same error . Pls help me to resolve this issue
Cannot connect to the server or database.
I am getting the similar error , if i use Tabular analysis server instance .
Subhash

[INS-08109] Unexpected error occurred while validating inputs at state 'get

Facing that on a windows 2003 server on installing 11gR2 on an installed 11.1.0.6
[INS-08109] Unexpected error occurred while validating inputs at state 'getOCMDetails'.
that's in the first step on the installer

Very stupid installer !
I've omitted my email, then pressed no in the next message, it passed that step!

INS-08109 unexpected error occured while validating inputs at state 'nodeSe

HI,
I am installing and configuring oracle 11gr2 in vmware(OEL 4). I have installed successfully 11g grid successfully. Now i am trying to install oracle 11g rac software. While selecting the node, It shows the below error.
INS-08109 unexpected error occured while validating inputs at state 'nodeSelectionPage'
Cause:No additional information available
Action: Contact Oracle Support services or refer to the software manual.
Please help me solve this issue.

u have resolved it . i has get the same issue.

Ins-08109 unexpected error occurred while validating inputs at state 'quick install'

Dear All,
I successfully configure clusterware for 2 node rac db. But when i try to install Oracle DB Software i am getting below error on 4 step .
ins-08109 unexpected error occurred while validating inputs at state 'quick install'.
Kindly advice over the same.
Thanks in advance.

Thanks John for your update,
Actually whenever i ask a question on OTN and Sybrand replied over the same every time instead of giving solution or advice he always try to insult other. I know that he is very senior to me and i am here posting query not to waste important time of anyone but to get the solution. Yes i forgot to update the i goggled and applied the recommendation before posting my query here. But this is not the correct way to advice anyone. Infact he also cross out this level where i am. If you think i hurt sentiments of anyone i feel sorry for that. But this is not the right way to advice in fact you all are seniors and we are coming here to learn from you guy's. OTN is not private property of anyone.
One thing more to say like you advice me calmly it's better to understand me how to do things accordingly now i will do that. Thanks again for your help and i will take care of all these things in future.
Actually the problem mentioned above i faced first time and after google i didn't get any blog or site with the same mentioned error instead it will give me link mentioned below:-
[Ins-08109] Unexpected Error Occurred 'Installoptionsui'.
But mine was
[ins-08109] unexpected error occurred while validating inputs at state 'quick install''
I tried one of the blog that states that similar problem occurs when clusterware is not up. First i check whether clusterware is up or not i found that it is up. But still i restarted it and try the installation again but getting the similar problem again.
In one blog it is mentioned that due to listener misconfiguration the problem occurs. I crosschecked listeners are configured from grid home.
So applied both the sol which i get by typing the same error which i mentioned above but not successful to get the solution.
In some website it is suggested that try to contact Oracle Support for the same.
Ok the problem is sorted out,I do a fresh installation of OS, Clusterware and DB, now i am not facing the same problem. I think the problem is related to group permission. Now this time i mention all the details what i do and what is the result i think now its better to understand.

Warning while deploying a map

Hi,
While deploying a map, it is giving following error:
ORA-06550: line 22, column 3:
PL/SQL: ORA-00942: table or view does not exist.
But the map deploys successfully and working fine.
Can anybody please tell me how to fix the warning.
Thanks,
Swaroop

Hi,
Thanks for the reply.
I have synchronised all the tables in the map. But still it is giving the same warning, while deploying.
--Swaroop

Error occured while importing a map.

I have got two design repositories and two runtime repositories in the same database. One is for OWB 9.2.0.4.0 and another for OWB 10.1.0.3.0.
I was trying to export 1 mapping from a project in OWB10g to OWB9i where the said project does not exist. The export operation ran smoothly but the following error occured while the import operation:
Error at line 25: MDL1261: Error importing DATAWAREHOUSE RTS/RTS.
Detailed Error Message:
MDL1162: System Type not specified before integrator.
While importing the options i used were:
Import option -----Add new metadata only
Match by---------Universal identifier.
Please help.

just a guess: while exporting use "physical names" in naming

Catch all error information while validating xml content with xsd schema

Hi experts,
I created a java mapping to validating the input xml content with xsd schema (schema validation). What I want is to catch all error message to the xml not just the first error. I used SAXParser in sapxmltoolkit.jar to do the schema validation. The below is a part of my java mapping.
XMLReader parser = XMLReaderFactory.createXMLReader("com.sap.engine.lib.xml.parser.SAXParser");
parser.setFeature( "http://xml.org/sax/features/validation" , true);
parser.setFeature( "http://apache.org/xml/features/validation/schema" , true);
parser.setProperty("http://java.sun.com/xml/jaxp/properties/schemaLanguage", "http://www.w3.org/2001/XMLSchema");          parser.setProperty("http://java.sun.com/xml/jaxp/properties/schemaSource",this.getClass().getClassLoader().getResourceAsStream(schema)); // schema is my schema name
parser.setErrorHandler(new ParseErrorHandler()); // ParseErrorHandler is my own ErrorHandler which extends DefaultHandler
parser.parse(new InputSource(new ByteArrayInputStream(sinput.getBytes())));
// In error handler, I comment all code so as not to throw any exception
public class ParseErrorHandler extends DefaultHandler
     public void error(SAXParseException e) throws SAXException
          // sSystem.out.println("Error" + e.getMessage());
          // throw e;
     public void fatalError(SAXParseException e)
          // throw e;
          // System.out.println("SAP Fatal Error" + e.getMessage());
Unfortunately the program always stopped while catching the first error. Check the below log.
com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException:
ERRORS :
cvc-simple-type : information item '/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]/:CityName[1]' is not valid, because it's value does not satisfy the constraints of facet 'minLength' with value '1'.
cvc-data : information item '/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]/:CityName[1]' is is not valid with respoct to the corresponding simple type definition.
cvc-element : element information item '/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]/:CityName[1]' is associated with invalid data.
cvc-element : element information item '/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]' is not valid with respect to it's complex type definition..
cvc-element : element information item '/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]' is not valid with respect to it's complex type definition..
cvc-element : element information item '/:ShipNotice[1]/:Header[1]/:To[1]' is not valid with respect to it's complex type definition..
cvc-element : element information item '/:ShipNotice[1]/:Header[1]' is not valid with respect to it's complex type definition..
cvc-element : element information item '/:ShipNotice[1]' is not valid with respect to it's complex type definition..
-> com.sap.engine.lib.xml.parser.ParserException:
I tried using Xerces and JAXP to do validation, the same error happened. I have no idea on this. Does xi has its own error handler logic? Is there any body can make me get out of this?
Thanks.

<h6>Hi experts,
<h6>
<h6>I created a java mapping to validating the input xml content with xsd schema (schema validation). What I want is to catch all <h6>error message to the xml not just the first error. I used SAXParser in sapxmltoolkit.jar to do the schema validation. The below <h6>is a part of my java mapping.
<h6>XMLReader parser = XMLReaderFactory.createXMLReader("com.sap.engine.lib.xml.parser.SAXParser");
<h6>parser.setFeature( "http://xml.org/sax/features/validation" , true);
<h6>parser.setFeature( "http://apache.org/xml/features/validation/schema" , true);
<h6>parser.setProperty("http://java.sun.com/xml/jaxp/properties/schemaLanguage", "http://www.w3.org/2001/XMLSchema");          <h6>parser.setProperty("http://java.sun.com/xml/jaxp/properties/schemaSource",this.getClass().getClassLoader().getResourceAsStream(schema)); <h6>// schema is my schema name
<h6>parser.setErrorHandler(new ParseErrorHandler()); // ParseErrorHandler is my own ErrorHandler which extends Default Handler
<h6>parser.parse(new InputSource(new ByteArrayInputStream(sinput.getBytes())));
<h6>
<h6>// In error handler, I comment all code so as not to throw any exception
<h6>public class ParseErrorHandler extends DefaultHandler
<h6>{
<h6>     public void error(SAXParseException e) throws SAXException
<h6>     {
<h6>          // sSystem.out.println("Error" + e.getMessage());
<h6>          // throw e;
<h6>     }
<h6>
<h6>     public void fatalError(SAXParseException e)
<h6>     {
<h6>          // throw e;
<h6>          // System.out.println("SAP Fatal Error" + e.getMessage());
<h6>
<h6>     }
<h6>
<h6>}
<h6>
<h6>Unfortunately the program always stopped while catching the first error. Check the below log.
<h6>
<h6>com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException:
<h6>ERRORS :
<h6>cvc-simple-type : information item <h6>'/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]/:CityName[1]' <h6>is not valid, because it's value does not satisfy the constraints of facet 'minLength' with value '1'.
<h6>cvc-data : information item <h6>'/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]/:CityName[1]' <h6>is is not valid with respoct to the corresponding simple type definition.
<h6>cvc-element : element information item <h6>'/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]/:CityName[1]' <h6>is associated with invalid data.
<h6>cvc-element : element information item <h6>'/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]' <h6>is not valid with respect to it's complex type definition..
<h6>cvc-element : element information item <h6>'/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]' <h6>is not valid with respect to it's complex type definition..
<h6>cvc-element : element information item <h6>'/:ShipNotice[1]/:Header[1]/:To[1]' <h6>is not valid with respect to it's complex type definition..
<h6>cvc-element : element information item <h6>'/:ShipNotice[1]/:Header[1]' <h6>is not valid with respect to it's complex type definition..
<h6>cvc-element : element information item '/:ShipNotice[1]' is not valid with <h6>respect to it's complex type definition..
<h6> -> com.sap.engine.lib.xml.parser.ParserException:
<h6>
<h6>
<h6>I tried using Xerces and JAXP to do validation, the same error happened. I have no idea on this. Does xi has its own error <h6>handler logic? Is there any body can make me get out of this?
<h6>Thanks.

Configurator Error- Warning while booking the Sales Order

Hello All,
I am working on Order Management. When i try to book the order using (wf pkg) some times it is throwing an error saying "Configurator error" But when i open the configurator its not a Error message, its jsut a Warning. So, i have to manually click on the CONFIGURATOR, clicking on PREVIEW Configurator, and FINISH Button each time.
Is there any API which can ignore this warning and proceed with Booking the order automatically. (Unless there is an Error, not the warning)
It would be really helpful for me, as i am doing this manually, almost 100 Orders daily.
Thank you,
Aush

You are probably getting the error because the order selections were not valid and therefore you could not book the order.
When you open the configurator and click finish, it may APPEAR that you did not do anything. But in reality, when you click Finish, your selections are changing. Some of the selections are done automatically by rules so some of your incorrect selections are getting fixed by simply opening the configurator and clicking on Finish.
You can verify that by opening the configurator but instead of Finish, click on Cancel. And then try to book the order. You will probably get an error because you did not let the auto-rules fix the errors in your order.
If you want to avoid doing this 100 times a day, you need to look at the process that is creating the order lines in ENTERED state. Your problem is somewhere there.
Hope this helps,
Sandeep GAndhi

An unknown error occurred while validating the server dns

I am getting this error on the forwarder on my dc/DNs server which has a forwarder. Other DNS/DC servers have the same ip and are not getting the error validating the dns forwarder. only this one which is a 2008r2 dc just promoted. any idea?

Please make sure that there is no firewall / router that is blocking DNS traffic.
The problem persists if you disable EDNS0?
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Microsoft
Student Partner
Microsoft Certified Professional
Microsoft Certified Systems Administrator: Security
Microsoft Certified Systems Engineer: Security
Microsoft Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
Microsoft Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration

Getting "iPhone needs to cool down" warning while using Apple Maps

I bought the iPhone 6 yesterday and today I used the Apple Maps navigation on it. Not 30 mins into the navigation I got following warning from the phone "iPhone needs to cool down". 30 minutes of GPS usage is not too much. This happened twice. Are other ppl. having the same issue or is it just my phone?
Thanks,
Anupam

Hi, ganupam.
Thank you for visiting Apple Support Communities.
This alert can present itself because of multiple reasons. This article provides an explanation of this alert and some common causes.
Keeping iPhone, iPad, and iPod touch within acceptable operating temperatures
http://support.apple.com/kb/HT2101
If you are still experiencing this issue and feel you need assistance, take a look at the article below.
Contact Apple for support and service
http://support.apple.com/kb/HE57
Cheers,
Jason H.

Error when trying to upload an app to the App Store (exception while validating)

Hello everybody,
I'm trying to upload an update of a DPS single edition app but when using the Application Loader I have this error:
"Exception while validating: *** -[NSPlaceholderString initWithFormat:locale:arguments:]: nil argument"
Any suggestion? the test app works right in my iPads and I tried to download the zip file (from DPS App Builder) several times with the same result.
Thanks

@Riccardo – I suggest you go to the DPS forum for this:
http://forums.adobe.com/community/dps?view=discussions
Uwe

Error encountered while BER decoding Digital Signatures

Hello -
I work for a GOV agency and we use Common Access Cards/Smart Cards to login to our PC's and we subsequently use them to digitally sign PDF documents.
We have just recently switched to Adobe Acrobat 9.x Pro. Before this, we had Adobe 7.x Pro and had no troubles digitally signing documents, clearing those digital signature to reuse old documents, etc.
We first got Acrobat 9.x and had issues with digital signatures right away. We had to import this into the registry, which I believe I found on adobe forum.
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\9.0\Security\cASPKI\cASPKI\cCustomCertPrefs\c4974BB0C5EBA7AFE0254EF7BA0C695C60980 7096]
[HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\9.0\Security\cASPKI\cASPKI\cCustomCertPrefs\c4974BB0C5EBA7AFE0254EF7BA0C695C60980 7096\cAdobe_OCSPRevChecker]
[HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\9.0\Security\cASPKI\cASPKI\cCustomCertPrefs\c4974BB0C5EBA7AFE0254EF7BA0C695C60980 7096\cAdobe_OCSPRevChecker\cURL]
[HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\9.0\Security\cASPKI\cASPKI\cCustomCertPrefs\c4974BB0C5EBA7AFE0254EF7BA0C695C60980 7096\cAdobe_OCSPRevChecker\cURL\c0]
"sValue"=hex:68,74,74,70,3a,2f,2f,6f,63,73,70,2e,64,69,73,61,2e,6d,69,6c,00
[HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\9.0\Security\cASPKI\cASPKI\cCustomCertPrefs\c4974BB0C5EBA7AFE0254EF7BA0C695C60980 7096\cAdobe_OCSPRevChecker\cURLToConsult]
[HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\9.0\Security\cASPKI\cASPKI\cCustomCertPrefs\c4974BB0C5EBA7AFE0254EF7BA0C695C60980 7096\cAdobe_OCSPRevChecker\cURLToConsult\c0]
"iValue"=dword:00000001
Lately we've had trouble verifying signatures. Once we sign a document and then click the signature, we get the attached error.
Error during signature verification
Error encountered while validating
Error encountered while BER decoding
When we started to notice this we were on Acrobat 9.2. I think we may have went from 9.0 to 9.1.3 and then to 9.2 pretty quick. I removed it and installed our base load of Acrobat 9.0 and everything was working fine. I then updated to 9.1, 9.1.1, 9.1.2, 9.1.3 and none of them worked or fixed the issue. We have recently approved the update to 9.3, but that didn't fix it either. Because of this BER decoding issue, we cannot right click the signature field and clear a signature as well. Even after updates I could clear a signature field signed under Adobe 9.0.
Adobe, what should I do? Do we have a problem elsewhere, outside of Acrobat?
Again, we use smart card's to sign the documents, thus cannot change certificates.
Thanks, Nick

Hi Nick,
When you mentioned that upgrading to 9.3 didn't fix the problem, did you mean when creating a new signature in Acrobat/Reader 9.3 or did you mean opening a previously signed file and doing the signature verification?
If you meant the later, no version of Acrobat will be able to decode the signature if it was created incorrectly, which is what I fear you are referring to. What happened was Acrobat 9.0 changed the default digest method from the older SHA-1 to the the new SHA-256, but if the device that encrypts the digest (the actual signing operation) cannot handle the larger digest Acrobat is supposed to fall back to the older, smaller SHA-1 digest. There was a bug where Acrobat wasn't re-computing the digest if the smart card couldn't handle SHA-256 and creating a corrupt signature. Once this corrupt signature is written out to the PDF file there is no getting around it. Update 9.3 fixes the problem at signature creation and you should be able to successfully sign using your CAC card, but sadly there is no fixing the existing corrupt signatures.
Steve

Error/Warning while validating a mapping

Similar Messages

Maybe you are looking for