Error VLD-1108 while validating the mapping in owb 11g

Hi All,
I am using owb 11.1.0.7.0. I am new to owb 11g. I am getting the following error while validating the mapping
error: VLD-1108 . Operator requires more input or output connections in order to generate mapping code.
I am using a function as operator and mapping it with the table.
Please tell me the solution for this. Its urgent
Thanks in advance,
Siva

Hi,
u must be using a procedure or table function that is called in the mapping for execution. When writing the function u would have specified 3 inputs but in the mapping u would have given only 2. check the number of inputs and make sure they match.
Regards
Bharadwaj Hari

Similar Messages

Error VLD - 5005 when validating the map

Using Datawarehouse builder 10.2 i have the following problem.
This is the scenario:
I have a dimension with one level and no hierachy and i want to do a mapping between a table and that dimension.
Table has three atributes:supplier_id;name_sup;adress_sup.
The dimension(which passes the validation) as four, three of type business to store information from the table atributes and one of the type surrogate(all these atributes belong to the same level).
When validating the mapping I have this error:
VLD-5005: no updatable inputs connected for dimension level "DIM_CUSTOMERS.LEVEL1"
Details: At least one updatable input must be connected for level DIM_CUSTOMERS.LEVEL1, or the generated code will fail. paraent reference key and level natural key inputs are not updatable attributes in the target
If I change dimension loading type to remove(instead of load) the validation is sucessful but the map doesn't work.
Could anyone please give me a sugestion.
João Costa
Student of informatic engineering (University of Coimbra)

Hi!
could you explain that a little more please? (I.e. "make one of your source table attributes non-business"). I thought you could add the 'business' tag to attributes in the dimension, but I cannot see how to do that to the source table that is loading the dimension.
FYI, I am trying to add an 'all-levels' category-type top level to a dimension hierarchy where the true source data goes
L1>L3
L2>L3
L3to make the result
L-CATEGORY>L1>L3
L-CATEGORY>L2>L3
L-CATEGORY>L3
This is intended to combine source data from two sources, Products and Services. Products have two unrelated Type levels above them. Services have no Types. I thought I might be abow to create a mapping per source, and use a Constant to insert a Category attribute (business key) of either 'PRODUCT' or 'SERVICE' per mapping. My thinking was to use two seperate loads to the dimension. However, the first one generates the VLD-5005 error. I'd sure appreciate some help with theis fix.
Do you know a better way of doing this?
Also, is there a list/manual anywhere of all error messages for Paris?
Cheers,
Donna

Error while deploying the mapping in owb 10gR2

Hi friends,
when i tried to deploy the mapping firstly i got the below error like
Name
Action
Status
Log
COPY_OF_ORG_FINAL_MAPPING
Create
Warning
ORA-06550: line 11, column 3: PL/SQL: SQL Statement ignored
COPY_OF_ORG_FINAL_MAPPING
Create
Warning
ORA-06550: line 18, column 59: PL/SQL: ORA-00942: table or view does not exist
COPY_OF_ORG_FINAL_MAPPING
Create
Warning
ORA-06550: line 33, column 3: PL/SQL: SQL Statement ignored
COPY_OF_ORG_FINAL_MAPPING
Create
Warning
ORA-06550: line 40, column 59: PL/SQL: ORA-00942: table or view does not exist
COPY_OF_ORG_FINAL_MAPPING
Create
Warning
ORA-06550: line 216, column 7: PL/SQL: SQL Statement ignored
COPY_OF_ORG_FINAL_MAPPING
Create
Warning
ORA-06550: line 237, column 59: PL/SQL: ORA-00942: table or view does not exist
From the above error, it states like table doesn't exist. Hence after checking that the source table connections that i used in the mapping seems to be wrong.
so what i did is, in the control center i right clicked the source module where i have used source table and changed the connection but soon after i pressed the ok button as a part of registering i got the below error like
>> RTC-5318 Invalid Location Type pair for Name oracle db and version 11.1
I ignored the above error and continued to deploy the mapping, but as a result of mapping i got the below error like
Name
Action
Status
Log
None
INFORMATIONAL
ORA-04052: error occurred when looking up remote object [email protected]@PEOPLE_SOURCE_LOCATION ORA-00604: error occurred at recursive SQL level 1 ORA-02019: connection description for remote database not found
COPY_OF_ORG_FINAL_MAPPING
Create
Warning
ORA-06550: line 0, column 0: ORA-04052: error occurred when looking up remote object [email protected]@PEOPLE_SOURCE_LOCATION ORA-00604: error occurred at recursive SQL level 1 ORA-02019: connection description for remote database not found
Not sure, where im missing.
Kindly help me friends,
Thanks
Brgds,
Mini

Hi Vidyanand,
Did you create the runtime access user using the runtime assistant? Did you select the correct runtime repository (if you have more) to associate your runtime access user with?
Note that there are 4 database roles being created when you create a runtime repository owner:
- OWB_A_<runtime repository owner>
- OWB_D_<runtime repository owner>
- OWB_R_<runtime repository owner>
- OWB_U_<runtime repository owner>
If you would grant those roles to a user, then that user becomes an access user for the user with username <runtime repository owner>.
Note that you can also use the runtime repository credentials to connect to the runtime repository for deployment purposes, but you may not want that because of security concerns.
Thanks,
Mark.

Error/Warning while validating a mapping

I'm using OWB version 9.2 and database 9i.
I have few major problems in OWB. We have stage and star schemas on the same database instance. The source system is on a different database instance. There are database links created between target instance to source.
I have about 20 mappings; all validated, deployed and executed successfully about 2 weeks back.
Beginning of this week I logged on to OWB and tried to make some changes to one of the mappings. Before I made changes I tried to validate the mapping and I got following warnings:
"VLD-1008: Referenced mapping column <COLUMN_NAME> does not exist"
"VLD-1003: Reference <COLUMN_NAME> between mapping object and repository object does not exist".
When I click on "View Details" it says I need to reconcile outbound of the staging table.
When I have not made any changes to the mapping why do I need to do this? I want to know under what circumstances do we get this message?
Another weird thing is I validated the mapping, after 15 minutes I tried to deploy this and still got the above warnings, although I had reconciled outbound and successfully validated the mapping. Am I missing something here?
Another problem is I have a mapping which loads a dimension from staging table. Very simple basic mapping all it does is dumps from staging table to dimension and key is generated by sequence generator. Both stage and star schemas are on the same database instance. When I try to validate this mapping it gives me error:
"VLD-2769: Database link is not allowed for data target <DIMENSION_NAME>" and when I click view details it shows following:
"Loading of data across database link is not supported. Deploy this mapping within the same database instance as the actual target and remove the database link access specification from the physical configuration of this data target operator."
I have not specified any database link or schema name in the mapping configuration; both stage and star schemas are on same instance. Although there are two instances that it works fine. First if I provide the schema name in the mapping configuration it gives me warning but deploys and executes fine. Secondly if I go to deployment manager, select the mapping and click deploy it validates successfully. Why do I get this error when I validate in the mapping editor?
I never had these problems before; all the mappings were validated, deployed and executed successfully.
I would like to know where/what could have gone wrong? Could any of you point me in the right direction? Any help would be greatly appreciated.
Thanks

hi.
ok look i also had this errors:
"VLD-1008: Referenced mapping column <COLUMN_NAME> does not exist"
"VLD-1003: Reference <COLUMN_NAME> between mapping object and repository object does not exist".
this errors could be due to that something has change in the source database, in this case could be that somebody change the name column since the last time you did the load.
A possible solution is that you open the mapping (edit) and reconcile the tables both the table "from"(where the table came) and the table "to"(the table destination).
ooh and check the source system for any table that has changed, if it changed, so you have to load again the table.
bye

Can't save BISM file pointing to excel sheet (data source). ErrMsg: "There were errors found while validating the page: Cannot connect to the server or database."

Hi,
Me and a collegue is administrering our new enterprise BI portal in SharePoint 2013 (On Premise) and have a problem with using a specific Excel file including general ledger data as data source through a BISM file.
This particular BISM file can't be saved without getting the error message "There were errors found while validating the page: Cannot connect to the server or database."
BISM files against other Excel sheets and sources (for example SSAS tabular databases) works well.
Can anyone help us pinpointing whats wrong here, this is a really important stakeholder in our organization requesting this reporting?
Cheers!

Hi E.SWARD ,
My self created a Power pivot excel then i want to use this excel to create BI file . Still i am getting the same error . Pls help me to resolve this issue
Cannot connect to the server or database.
I am getting the similar error , if i use Tabular analysis server instance .
Subhash

Ora -06550 error while executing the mapping

Hi,
I am using owb client 11.2.0.3 . I have mapping map_emlap_src in this mapping i have import tables from different scehema and i have done one to one mapping on both the table .
While executing the mapping i got the following error .
ORA-06550: line 1, column 1082:
PLS-00302: component 'MAP_EMLAP_SRC' must be declared
ORA-06550: line 1, column 1062:
PL/SQL: Statement ignored

grant execute on owner_name.MAP_EMLAP_SRC to user_name;

Error while Validating the condition in Joiner

Hi,
Im using a Joiner transformation and entered the condition. While validating it displays an OWB error.
OWB ERROR - The object references has been invalidated due to switching of projects
Can you pls suggest how to resolve this.
Thanks in Advance
Regards
Kishan

Thanks for the prompt help. Is there any other way instead of removing the DTD line ?. Because the xml is coming as a string and removing the dtd and then adding it will unneccesary hamper performance. Do you any other way in which even though I don't remove the line I get the output without removing the dtd line ?.
thanks and regards,
Sachin

Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site

Have an existing ex2010 sp3 organization.
Could not run ex2013cu1 setup from my newly built 2012 server, getting the error in the subject line. I used the command line to run the AD preparation steps successfully from my 2012 DC/GC, then tried to run setup again from the new 2012 server and
still get the same error. The error itself in the log is pretty useless:
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0137] [0] Starting Microsoft Exchange Server 2013 Cumulative Update 1 Setup
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0152] [0] Local time zone: (UTC-08:00) Pacific Time (US & Canada).
[05/07/2013 01:19:13.0152] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[05/07/2013 01:19:13.0152] [0] Setup version: 15.0.620.29.
[05/07/2013 01:19:13.0152] [0] Logged on user: DOMAIN\ADMINISTRATOR.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='sourcedir', Value='\\h1\f$\junk\installers\server\Exchange\2013cu1'.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='mode', Value='Install'.
[05/07/2013 01:19:13.0215] [0] RuntimeAssembly was started with the following command: '/sourcedir:\\SERVER\f$\junk\installers\server\Exchange\2013cu1 /mode:Install'.
[05/07/2013 01:19:13.0215] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0793] [0] Finished loading screen CheckForUpdatesPage.
[05/07/2013 01:19:38.0762] [0] Finished loading screen UpdatesDownloadsPage.
[05/07/2013 01:19:40.0496] [0] Starting file's copying...
[05/07/2013 01:19:40.0496] [0] Setup copy files from '\\SERVER\f$\junk\installers\server\Exchange\2013cu1\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
[05/07/2013 01:19:40.0700] [0] Finished loading screen CopyFilesPage.
[05/07/2013 01:19:40.0840] [0] Disk space required: 1292445007 bytes.
[05/07/2013 01:19:40.0840] [0] Disk space available: 23767240704 bytes.
[05/07/2013 01:19:59.0762] [0] File's copying finished.
[05/07/2013 01:19:59.0965] [0] Finished loading screen InitializingSetupPage.
[05/07/2013 01:20:02.0934] [0] Setup is choosing the domain controller to use
[05/07/2013 01:20:09.0325] [0] Setup is choosing a local domain controller...
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
[05/07/2013 01:20:11.0809] [0] Setup will use the domain controller ''.
[05/07/2013 01:20:11.0809] [0] Setup will use the global catalog ''.
[05/07/2013 01:20:11.0825] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0919] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0966] [0] Setup will search for an Exchange Server object for the local machine with name 'WEX1'.
[05/07/2013 01:20:12.0028] [0] No Exchange Server with identity 'WEX1' was found.
[05/07/2013 01:20:12.0044] [0] The following roles have been unpacked:
[05/07/2013 01:20:12.0044] [0] The following datacenter roles are unpacked:
[05/07/2013 01:20:12.0044] [0] The following roles are installed:
[05/07/2013 01:20:12.0059] [0] The local server does not have any Exchange files installed.
[05/07/2013 01:20:12.0075] [0] Server Name=WEX1
[05/07/2013 01:20:12.0137] [0] Setup will use the path '\\SERVER\f$\junk\installers\server\Exchange\2013cu1' for installing Exchange.
[05/07/2013 01:20:12.0137] [0] The installation mode is set to: 'Install'.
[05/07/2013 01:20:27.0591] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
[05/07/2013 01:20:27.0591] [0] Active Directory Initialization status : 'False'.
[05/07/2013 01:20:27.0591] [0] Schema Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Organization Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Domain Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0841] [0] Applying default role selection state
[05/07/2013 01:20:27.0872] [0] Setup is determining what organization-level operations to perform.
[05/07/2013 01:20:27.0872] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN.
[05/07/2013 01:20:27.0872] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[05/07/2013 01:20:27.0888] [0] InstallModeDataHandler has 0 DataHandlers
[05/07/2013 01:20:27.0888] [0] RootDataHandler has 1 DataHandlers
[05/07/2013 01:20:27.0903] [0] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See
the Exchange setup log for more information on this error.
[05/07/2013 01:20:27.0935] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:21:04.0154] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:21:04.0154] [0] End of Setup
[05/07/2013 01:21:04.0154] [0] **********************************************

Hi,
The cause is clearly described in the log:
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
I'd suggest you check NIC settings and AD configuration.
Hope it is helpful.
Fiona Liao
TechNet Community Support

"Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run se

Team,
I am trying to Install Exchange on my Lab, getting below error
message.
The Schema Role is installed on Root Domain and trying to install
exchange on Child domain.
1 Root Domain - 1 Child domain. both are located on single site.
“Setup encountered a problem while validating
the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
replication to complete.”
Followed below articles:
http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
http://www.petenetlive.com/KB/Article/0000793.htm
transferred the schema roles to different server on root domain, still no luck.
can someone please help me.
regards
Srinivasa k
Srinivasa K

Hi Srinivasa,
I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
After finishing this,
2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
5. Finally, run the setup program
Hope this will help you
Regards from Visit ExchangeOnline |
Visit WindowsAdmin

Configure Synchronization Connections An error has occurred while accessing the SQL Server database

Hi,
i am getting following error message
Central Administration --> Synchronization Connections
An error has occurred while accessing the SQL Server database or the SharePoint Server Search service.
If this is the first time you have seen this message, try again later. If this problem persists, contact your administrator.
Central Administration --> Manage Profile Service: User Profile Service Application --> Manage User Properties
Error
An unexpected error has occurred.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 3bce5a11-f2dc-4788
Please tell how to fix it.
iffi

Event ID 5555 -> i have change the Timer jobs recycling time AM to PM
for User profile page not display number of count in the page first check services , connection ,
IISRESET /NOFORCE / timer services restart
Deepesh Yevle MCTS

Error message while opening a project: "an error was encountered while loading the image"

We've run into a new error message here today:
an error was encountered while loading the image
It appears when we try to load a recorded project. It occurs on both the cp-file and the backup file.
It's on a windows 7-machine.
Anyone encountered it and knows what it means?
is the project lost forever?

Hi there
Hmmm, it may be related to Windows 7, but let's check the obvious stuff first.
Where exactly is th project if you locate it using Windows Explorer? Is it found on your local C drive or is it found on a network drive?
If it's on a network drive, please note that Captivate has never worked well with projects being edited while they are on network resources. So the first step in this case (assuming that's where the project is) would be to move the project file off the network and onto the local C drive. Then try opening again.
Assuming the project isn't on a network, all still may not be lost. The next thing to try would be to create a new blank project sized identically to the one that seems to have gone south. Then click File > Import > Slides/Objects and see if you can import the content from the errant project into the new.
And if those steps fail, it's likely time to restart from scratch. But depending on what you have done so far and how you have done it, you might be able to salvage some of it by playing back the content (assuming you have published it during testing) and record what you are playing back with Captivate.
Best of luck to you in sorting things. You should also consider filing a Bug Report.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

An error has occurred while loading the report

Hello all,
I'm trying to view a Crystal Report from my CRM application and I receive the follow error message, but only when trying to view it on a laptop:
An error has occurred while loading the report. Please contact technical support.
Has anyone else run into this problem?
Thanks!

Hello Eddie,
please post some more information about your problem.
What is the name of your CRM app?
Who developed this app?
Did it never work or do you get this error only now?
Always or only sometimes only?
In what versions and on what patchlevel are you working ?
Thanks for some more info
Falk

OWB 11.2 with SAP V6, Eror while execution the mapping.

I have a simple staging mapping, I am trying to get data into my staging table from SAP system. So far I have created a simple 1-1 mapping. when I generate the code it produces a abap report which when I try to execute on SAP system I get a syntax error. Now this error did not occur with SAP 11.1, Now I am trying to do is the following since going back to 11.1 is not a option.
When I try to run the mapping using OWB I get the following error.
NativeExecution PlatformSchema M_STG_CABN_ODS
M_STG_CABN_ODS
RPE-01082: Fail to execute the ABAP report.
Starting Execution of ABAP Report CABN_STG_CABN on Wed Nov 03 11:59:58 EDT 2010
Running ABAP report through function module RFC_ABAP_RUN_AND_INSTALL
ERROR: null
Exit on error: Execution of ABAP Report CABN_STG_CABN on Wed Nov 03 11:59:58 EDT 2010
M_STG_CABN_ODS FAILURE
NativeExecution PlatformSchema M_STG_CABN_ODS
Although the error is not descriptive i believe structure of the report could be the reason.
Now I am trying to do a work around I save the report into a folder on AIX and modify the file to change the structure of the file. All I have to do is add/ delete spaces in certain places.
Now I plan on creating a process flow which would call that file using a user defined function.
Once I modify the report file manually, I want to execute the report so that I can generate the .dat file and ftp it over to the location and load it into staging using SQL loader as the .dat file is in that format.
The question is How do I do this. Do I need to specify the complete process in the process flow
or when I execute the report it would do the process for me as the ftp folder location has been specified in the SAP location.
Edited by: U1234567890 on Nov 3, 2010 9:01 AM

Is there any other work around?
I am planning on saving the file and making the changes manually and then FTP it to SAP, Now my problem is I am not sure what Location to move it to.
My question now is where(location) does it(ABAP Report) get deployed . If it is not stored then how does OWB execute the steps in the file. I am trying to find where I can drop the modified file.
Thanks

We're sorry, an error has occurred while processing the request. Please try again. that error comes when i registred the apple care protection plan plzz suggestion me

We're sorry, an error has occurred while processing the request. Please try again. that error comes when i registred the apple care protection plan plzz suggestion me

Call AppleCare.

An error has occurred while exporting the folio

An error has occurred while exporting the folio.
Failed to download the folio to your local disk.
Keep getting this error.. any suggestions?
Edit: it's working all of a sudden...

After several tries it worked...

Error VLD-1108 while validating the mapping in owb 11g

Similar Messages

Maybe you are looking for