Error when adding a ZFS Storage in the Desktop Provider configuration in Oracle VDI

Hello,
When I tried to add a Desktop Provider in Oracle VDI I received an error in the 4 option after the Certificate verification in Specify Storages.
Here's the log:
LA M▒<81>S FINA: thr#20197:"Thread-46528" Congestion Retry 1 for root at 10.10.10.104 - com.jcraft.jsch.JSchException: Session.connect: java.net.SocketTimeoutException:
Read timed out
com.jcraft.jsch.JSchException: Session.connect: java.net.SocketTimeoutException: Read timed out
 at com.sun.vda.service.ssh.SshServer.openChannel(SshServer.java:622)
 at com.sun.vda.service.ssh.SshServer.access$000(SshServer.java:55)
 at com.sun.vda.service.ssh.SshServer$CommandResultRetriever.run(SshServer.java:844)
Caused by: com.jcraft.jsch.JSchException: Session.connect: java.net.SocketTimeoutException: Read timed out
 at com.jcraft.jsch.Session.connect(Session.java:495)
 at com.sun.vda.service.ssh.SshServer.openChannel(SshServer.java:563)
 ... 2 more
8/09/2015 11:15:05 AM com.sun.vda.service.ssh.SshServer handleJSchException
LA M▒<81>S FINA: thr#20257:"RMI TCP Connection(340)-127.0.0.1" SSH exception
com.sun.vda.service.api.ConnectionException: An internal error occurred.
 at com.sun.vda.service.ssh.SshServer.handleJSchException(SshServer.java:721)
 at com.sun.vda.service.ssh.SshServer.openChannel(SshServer.java:645)
 at com.sun.vda.service.ssh.SshServer.access$000(SshServer.java:55)
 at com.sun.vda.service.ssh.SshServer$CommandResultRetriever.run(SshServer.java:844)
Caused by: com.jcraft.jsch.JSchException: Session.connect: java.net.SocketTimeoutException: Read timed out
 at com.sun.vda.service.ssh.SshServer.openChannel(SshServer.java:622)
 ... 2 more
Caused by: com.jcraft.jsch.JSchException: Session.connect: java.net.SocketTimeoutException: Read timed out
 at com.jcraft.jsch.Session.connect(Session.java:495)
 at com.sun.vda.service.ssh.SshServer.openChannel(SshServer.java:563)
 ... 2 more
8/09/2015 11:15:05 AM com.sun.vda.service.ssh.SshServer executeCommand
LA M▒<81>S FINA: thr#20257:"RMI TCP Connection(340)-127.0.0.1" executed echo
8/09/2015 11:15:06 AM com.sun.vda.service.persistence.PersistenceImpl update
I'm using this guide: http://www.oracle.com/technetwork/articles/servers-storage-admin/zfssa-oracle-vdi-398526.html
because is the same use case.
Any ideas?
Thanks

Thanks for the answer, I can access manually via ssh
bash-3.2# ssh [email protected]
Password:
Last login: Mon Sep 8 15:58:54 2014 from 10.10.10.117
Waiting for the appliance shell to start ...
zfserver:>
I restarted the service as you said but still not working. What else can be?

Similar Messages

Win Server 2012 Failover Cluster - Error when adding disk onto a cluster (The error code was '0x1' ('Incorrect function.').)

Hi Techies
I'm currently running running 2 VMs Win Server 2012 and would like to test Failover Clustering for one of our FTP server
I've added on both servers an additional partition, formatted and Online, but cannot bring the disk online from the cluster manager
Assistance would be greatly appreciated
Thank you
Jabu

You posted this in the Exchange Forum, your best bet for an answer would be to post this in the Windows Server Forum.
https://social.technet.microsoft.com/Forums/en-US/home?forum=winserverClustering
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Error while adding a new field to the Segment in we31

Hi ,
I am getting error when i am trying to add the new field to the cust. segment.
It is released for the adding the new fields i am cancelling the release , but i got a message like this
Error while resetting release of segment 'segment name'.
it is comming from the message class EA and message number 259.
Thanks in advance.
Reagrds,
bharani

Hi,
Have you tried Cancelling the release before adding the version?
Select the active version of the IDOC Segment and cancel its release first. Only then you will be able to add a version.
Please let me know if it worked!
Vijay

Error when adding a partition to a materlialized view

Hi,
I am getting this error when adding a partition to a materialized view.
ALTER MATERIALIZED VIEW mvedw.MV_CLM_CAPITN_F ADD PARTITION MAR2013 VALUES LESS THAN ('201304')
ERROR at line 1:
ORA-14074: partition bound must collate higher than that of the last partition
Please advise.
Regards,
Narayan

SQL> select TABLE_OWNER,TABLE_NAME,PARTITION_NAME,HIGH_VALUE from dba_tab_partitions where table_name =
'MV_CLM_CAPITN_F' order by PARTITION_NAME 2
3 ;
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F APR2009 '200905'
MVEDW MV_CLM_CAPITN_F APR2010 '201005'
MVEDW MV_CLM_CAPITN_F APR2011 '201105'
MVEDW MV_CLM_CAPITN_F APR2012 '201205'
MVEDW MV_CLM_CAPITN_F AUG2009 '200909'
MVEDW MV_CLM_CAPITN_F AUG2010 '201009'
MVEDW MV_CLM_CAPITN_F AUG2011 '201109'
MVEDW MV_CLM_CAPITN_F AUG2012 '201209'
MVEDW MV_CLM_CAPITN_F DEC2008 '200901'
MVEDW MV_CLM_CAPITN_F DEC2009 '201001'
MVEDW MV_CLM_CAPITN_F DEC2010 '201101'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F DEC2012 '201301'
MVEDW MV_CLM_CAPITN_F FEB2009 '200903'
MVEDW MV_CLM_CAPITN_F FEB2010 '201003'
MVEDW MV_CLM_CAPITN_F FEB2011 '201103'
MVEDW MV_CLM_CAPITN_F FEB2012 '201203'
MVEDW MV_CLM_CAPITN_F FEB2013 '201303'
MVEDW MV_CLM_CAPITN_F JAN2009 '200902'
MVEDW MV_CLM_CAPITN_F JAN2010 '201002'
MVEDW MV_CLM_CAPITN_F JAN2011 '201102'
MVEDW MV_CLM_CAPITN_F JAN2012 '201202'
MVEDW MV_CLM_CAPITN_F JAN2013 '201302'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F JUL2009 '200908'
MVEDW MV_CLM_CAPITN_F JUL2010 '201008'
MVEDW MV_CLM_CAPITN_F JUL2011 '201108'
MVEDW MV_CLM_CAPITN_F JUL2012 '201208'
MVEDW MV_CLM_CAPITN_F JUN2009 '200907'
MVEDW MV_CLM_CAPITN_F JUN2010 '201007'
MVEDW MV_CLM_CAPITN_F JUN2011 '201107'
MVEDW MV_CLM_CAPITN_F JUN2012 '201207'
MVEDW MV_CLM_CAPITN_F MAR2009 '200904'
MVEDW MV_CLM_CAPITN_F MAR2010 '201004'
MVEDW MV_CLM_CAPITN_F MAR2011 '201104'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F MAR2012 '201204'
MVEDW MV_CLM_CAPITN_F MAR2013 '201304'
MVEDW MV_CLM_CAPITN_F MAY2009 '200906'
MVEDW MV_CLM_CAPITN_F MAY2010 '201006'
MVEDW MV_CLM_CAPITN_F MAY2011 '201106'
MVEDW MV_CLM_CAPITN_F NOV2009 '200912'
MVEDW MV_CLM_CAPITN_F NOV2010 '201012'
MVEDW MV_CLM_CAPITN_F NOV2012 '201212'
MVEDW MV_CLM_CAPITN_F OCT2009 '200911'
MVEDW MV_CLM_CAPITN_F OCT2010 '201011'
MVEDW MV_CLM_CAPITN_F OCT2011 '201111'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F OCT2012 '201211'
MVEDW MV_CLM_CAPITN_F SEP2009 '200910'
MVEDW MV_CLM_CAPITN_F SEP2010 '201010'
MVEDW MV_CLM_CAPITN_F SEP2011 '201110'
MVEDW MV_CLM_CAPITN_F SEP2012 '201210'
These are the list of partitions available.
Regards,
Narayan

Error when adding Essbase server...

Hi,
I installed Hyperion System 9.3.1 in my development machine and encounter the following error when adding a Essbase server in AAS for the first time.
Error: 1042017: Network error: The client or server timed out waiting to receive data using TCP/IP. Check network connections. Increase the NetRetryCount and/or NetDelay values in the ESSBASE.CFG file. Update this file on both client and server. Restart the client and try again.
I used the default user "admin" and password "password". I used my servername:10080 as the server name. I hope I am right.
Why is this happening? I tried changing netdelay settings but still get the same. Is this something else? Does this have anything to do with my TCP/IP settings? I am installing this on a virtual PC.
I couldn't find an answer in previous posts.
regards
h

The things that come to mind:
The server name you use should be the name of the virtual PC, not the machine it's running on. Also, depending on the settings for the Virtual PC environment, you may have to change the network options to allow it to be visible to the network, be in the right domain, etc...
The above may or may not get you any closer, the error message itself is just saying it can't receive a response from the server, which means the server never got the request or can't send a response back.
Good Luck,

Library error when adding contact or when logging in

The messenger server has a replica of the partition holding the users.
It's an OES 2 sp2 server, and the GW Messenger is 2.04.
Sometimes we see an error that says 'Library error' when adding a contact, or it doesn't show all users that exists with the search parameter given.
We also sporadically see a 'Library error' when some users log in to it.
Looking in the log I see an error that says 0xAE16 when users log in fails.
I can find the 0xAE11 error in the TID's but not the 0xAE16, I did find an article on the forums, mentioning this problem http://forums.novell.com/novell-prod...or-server.html, they mention memory problems, so it seems to me there is a bug that needs fixing.

I've disabled the '/diruseralias-"Internet EMail Address"' setting that was set up in the strtup.ma and strtup.aa scripts.
I've also, for now at least, chosen another replica.
I haven't seen the errors yet, so here's hoping...

Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled

When I try to add any new menu in my newly cloned instance I get this error:
Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled excpetion. ORA-04031.
Using Oracle EBS version 12.1.3.
Details:
Menu JOB_STRUCTURE_MENU
User Menu Name Job Strucure Menu
Menu Type Standard
Description Menu to add job, grade, and incentives
Seq = 1
Prompt = Enter and Maintain
Function = Combined Person & Assignment Form WF="US SHRMS TSKFLW
When I click save I get the error.
Any assistance would be greatly appreciated.
Thanks!

Please post the details of the application release, database version and OS.
When I try to add any new menu in my newly cloned instance I get this error:
Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled excpetion. ORA-04031.Is the issue with all menus or specific ones only?
Did AutoConfig complete successfully?
When I click save I get the error.
Any assistance would be greatly appreciated.Do you have any invalid objects in the database?
Any errors in the database log file?
Please obtain FRD log file for details about the error -- https://forums.oracle.com/forums/search.jspa?threadID=&q=FRD+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Get 9672 error when adding an Epson 7800 connected to an aiport express

I get a 9672 error when I try to add our epson 7800. It is a rendevous printer connected to an airport express. The aiport express is an extension of our aiport network base which is an airport extream. I am trying to add it to a G5 with osx 10.3.9.
I can add it to our mac minis that run 10.4 with no problem.
I tried deleting the driver and reinstalling the latest driver from epson and deleting the printer preferences.
It shows up as a rendevous printer but when I try and add it I get a 9672 error.

The problem seemed to be that we were printing to two epson Printers, a cx5400 and a 7800.
I repaired permissions.
Then I deleted the epson print drivers by putting the epson folder which is in the Library folder in the trash. Next I deleted the printer preferences by putting all the apple.print files in the users, home folder, library, preferenced folder in the trash and rebooted.
I had to reinstall the printer driver for the 5400 first, It requires a reboot, then reinstall the 7800 print driver. Then I connected the 7800 from my g5 via usb, added the printer and printed. Next I put the put the 7800 on the Airport Express, added the printer and printed. I then printed to the 5400 and deleted the printer I defined to print via usb from the G5.
Now it works. I tried to install the drivers and add the printers in many different orders and it seemed to be very important that the order above be followed. If I didn't I would get the 9672 error when I tried to add the 7800 or a communications error when I tried to print to the 7800.
Support at epson let me know how to deleted the printer driver.

TS3297 My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networ

My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networkl.

Can't connect to the iTunes Store
Make sure that time zone is correct in addition to date and time

I am getting the following error when I open my Safari Browser.the proceedure entry point sqlite3_wal_ check point could not be located in the dynamic link library SQLITE3.DLL

I am getting the following error when I open my Safari Browser.the proceedure entry point sqlite3_wal_ check point could not be located in the dynamic link library SQLITE3.DLL

Try going back to a restore point > System Restore - Microsoft Windows

"Unauthorized Host" error when you try to connect to the admin server

"Unauthorized Host" error when you try to connect to the admin server

If you see this error message when you try to connect to a Netscape
administration server:
Internal Error
The administration server was unable to fulfill your request.
Reason: Unauthorized host
--------------------------
Here is how to solve the problem and gain access. First you should
temporarily open access to all sites, and then once you make sure that
this lets you get into your administration server, try again to set up
the domain name or IP address access restrictions you want.
For all 2.x/3.x Netscape servers on Windows NT and Unix, or for Commerce and
Communications servers (1.x) on Unix:
<OL>
<LI>Open the "ns-admin.conf" file with a text editor. You can
find this file in the "admserv" directory under your Netscape
server root. The directory is named "admin-serv" in 3.x servers.
<LI>Delete the "Hosts" and "Addresses" lines you see there (either one
of them might not be present). Don't confuse the "Addresses" line,
which you should delete, with the "Address" line, which you should NOT
delete.
<LI>Save the file, then restart your administration server (on Unix run
"stop-admin" then "start-admin"; on Windows NT go into the Services
control panel and stop/start the "Netscape Admin Server" service).
</OL>
For Commerce Server or Communications Server (1.x) on Windows NT:
<OL>
<LI>Go into the registry editor. On Windows NT 4.0, run the command
"regedit". On Windows 3.51, run the command
"regedt32".
<LI>Navigate down to the section
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration".
<LI>Delete the "Hosts" and "Addresses" entries you see there (either one
of them might not be present). Don't confuse the "Addresses" entry,
which you should delete, with the "Address" entry, which you should NOT
delete.
<LI>Close the registry editor, then restart your administration server
by going into the Services control panel and stopping then starting the
"Netscape Administration" service.
</OL>
Now try again to access your administration server. Remember, the URL
will be something like "http://servername:12345/", where
"12345" is where the administration server's port number goes.
If you still get the same "Unauthorized host" error, then make sure that
your "ns-admin.conf" file really doesn't contain any "Hosts" or
"Addresses" lines any more, and try stopping your administration server
again then starting it back up.
Once you have access to your administration server, you can try again to
set up the access controls you want.
<UL>
<LI>For the administration server on a 3.x server installation, select
"Admin Preferences" from the General Administration page (the first page
you see when you connect to the admin server), then click on "Superuser Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 2.x server installation, select
"Configure Administration" from the Server Selector page (the first page
you see when you connect to the admin server), then click on "Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 1.x server installation, select
"Configure Administration Server" from the bottom of the Server Manager
page, then enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the substrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that your
DNS can resolve those hostnames -- it's generally safer to stick with IP address
restrictions.
When you're finished configuring this, click "Make These Changes" then
restart your admin server.
</UL>
If you still find yourself getting an "Unauthorized host" error message,
you can use the above steps to open up access and try different
settings.

"Unauthorized Host" error when you try to connect to the admin server

If you see this error message when you try to connect to a Netscape
administration server:
Internal Error
The administration server was unable to fulfill your request.
Reason: Unauthorized host
--------------------------
Here is how to solve the problem and gain access. First you should
temporarily open access to all sites, and then once you make sure that
this lets you get into your administration server, try again to set up
the domain name or IP address access restrictions you want.
For all 2.x/3.x Netscape servers on Windows NT and Unix, or for Commerce and
Communications servers (1.x) on Unix:
<OL>
<LI>Open the "ns-admin.conf" file with a text editor. You can
find this file in the "admserv" directory under your Netscape
server root. The directory is named "admin-serv" in 3.x servers.
<LI>Delete the "Hosts" and "Addresses" lines you see there (either one
of them might not be present). Don't confuse the "Addresses" line,
which you should delete, with the "Address" line, which you should NOT
delete.
<LI>Save the file, then restart your administration server (on Unix run
"stop-admin" then "start-admin"; on Windows NT go into the Services
control panel and stop/start the "Netscape Admin Server" service).
</OL>
For Commerce Server or Communications Server (1.x) on Windows NT:
<OL>
<LI>Go into the registry editor. On Windows NT 4.0, run the command
"regedit". On Windows 3.51, run the command
"regedt32".
<LI>Navigate down to the section
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration".
<LI>Delete the "Hosts" and "Addresses" entries you see there (either one
of them might not be present). Don't confuse the "Addresses" entry,
which you should delete, with the "Address" entry, which you should NOT
delete.
<LI>Close the registry editor, then restart your administration server
by going into the Services control panel and stopping then starting the
"Netscape Administration" service.
</OL>
Now try again to access your administration server. Remember, the URL
will be something like "http://servername:12345/", where
"12345" is where the administration server's port number goes.
If you still get the same "Unauthorized host" error, then make sure that
your "ns-admin.conf" file really doesn't contain any "Hosts" or
"Addresses" lines any more, and try stopping your administration server
again then starting it back up.
Once you have access to your administration server, you can try again to
set up the access controls you want.
<UL>
<LI>For the administration server on a 3.x server installation, select
"Admin Preferences" from the General Administration page (the first page
you see when you connect to the admin server), then click on "Superuser Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 2.x server installation, select
"Configure Administration" from the Server Selector page (the first page
you see when you connect to the admin server), then click on "Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 1.x server installation, select
"Configure Administration Server" from the bottom of the Server Manager
page, then enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the substrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that your
DNS can resolve those hostnames -- it's generally safer to stick with IP address
restrictions.
When you're finished configuring this, click "Make These Changes" then
restart your admin server.
</UL>
If you still find yourself getting an "Unauthorized host" error message,
you can use the above steps to open up access and try different
settings.

Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. what now?

Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. What now?

I am getting this error message as well. I have just downloaded Lightroom recently. I try to click on Lightroom / preferences....and nothing happens. I tried to uninstall and it is greyed out so I can't do that either. Suggestions? Please help?

I have a Lucid 2 LG. I have been having trouble with insuffient storage. I have a 8G phone and have spent hours with Tier 2 tech trying to move info from the internal storage to the SD card with no luck, When I go to storage in the settings it states t

I have a Lucid 2 LG. I have been having trouble with insuffient storage. I have a 8G phone and have spent hours with Tier 2 tech trying to move info from the internal storage to the SD card with no luck, When I go to storage in the settings it states that over 4 gigs is for Misc? System data takes up over 4 gigs. No one can tell me what system data consist of. So My question is does anyone know what system data is? I am assuming I have a 8 gigphone but can only use 4 gigs???

System data is the OS or operating system. That is where the recovery stays separated from the rest of the storage so that it doesn't get corrupted. It is not accessible and non-movable.

Keep getting this error when ever I try to use the CC_2014

keep getting this error when ever I try to use the CC_2014 InDesign
Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders. Ensure that you have appropriate permissions and then restart Adobe InDesign.
Also have Ai quit out on me in the CC_2014.
This is very frustration since I use these the most

For MAC try to give permissions to Adobe Indesign Folder:
Users/[user]/Library/Caches/Adobe InDesign
Users/[user]/Library/Preferences/Adobe InDesign
Access hidden user library files | Mac OS 10.7 and later
For Windows try to give permissions to Adobe Indesign Folder:
C:\Users\[username]\AppData\Roaming\Adobe\InDesign
C:\Users\[username]\AppData\Roaming\Adobe\InDesign
Also you can try logging in under a local administrator account as suggested by jeff.

PE-11: when adding music to a program the video splits and if it is draged back together the music s

PE-11: when adding music to a program the video splits and if it is dragged back together the music splits.
How can I get around this problem?

Glenda,
As a test, try dragging, while holding the Ctrl/Cmd modifier key, that "music" to Audio Track 2, and the "bird sounds" SFX file to Audio Track Audio Track 3. There have reports from other users, where the Fixed Audio Tracks, Narration and Soundtrack have caused problems. Those problems seem to be Project-specific. If your Timeline does not have Audio Tracks 1 - 3 already, you can use Add Tracks. The use of the Ctrl/Cmd key, changes how PrE handles existing files on the Timeline, when adding Assets. This usually comes into play, when one is adding Video, or Stills, and should not really affect those, when only adding Audio, but remember, this is only a test.
Good luck,
Hunt

Error when adding a ZFS Storage in the Desktop Provider configuration in Oracle VDI

Similar Messages

Maybe you are looking for