Error when adding Amazon AWS account to CAL

Recently I've registered for CAL and would like to try SAP HANA Developer edition. I followed tutorial about how to deploy SAP HANA using CAL and Amazon AWS account. One of the steps was to add AWS account (using public and secret keys) to CAL account. When I'm trying to do it, I'm receiving following error "An error from Amazon Web Services occurred: AMAZON : null". My AWS account is valid, but this is a corporate account and I'm not the root user. Does anybody know how to solve this?
Thanks,
VItaliy

Hi Vitaly,
could you please make sure, if you prepared your AWS account, as described in the FAQ page:
(the IAM roles setup is mandatory for using CAL) and your credit card should be provided in AWS account.
http://scn.sap.com/docs/DOC-54564

Similar Messages

Hi,Error when adding chart of account This entry already exists in the foll

Hi,
I am getting these below error while adding new chart of account.
This entry already exists in the following tables '' (UDO1) (ODBC -2035) [Message 131-183]
This entry already exists in the following tables 'G/L Accounts' (OACT) (ODBC -2035) [Message 131-183]
please suggest solving . Thanks Advance.
Regards
Rajkumar Gupta

Hi,
You may check this thread:
Re: This entry already exists in the following tables -Message
Also check SAP Note Number: 1054713 to see if it applies to you. It might be a bug too.
Thanks,
Gordon

Error when adding a new account

I am trying to make a new account that does the following but when I process the dimension it errors out. Is the formula just too long?
(([CALC_REV],[R028])([CALC_REV],[44])([CALC_REV],[R046])([CALC_REV],[R047])([CALC_REV],[R048])([CALC_REV],[R049])([CALC_REV],[50]))/(([DAYS_WORKED],[R028])([DAYS_WORKED],[44])([DAYS_WORKED],[R046])([DAYS_WORKED],[R047])([DAYS_WORKED],[R048])([DAYS_WORKED],[R049])([DAYS_WORKED],[50]))

Hi,
You might be facing this error because of the overall length of the formula.
The workaround is to maintain this formula in the MDXLib.LGL file. For example, if you want to multiply 2 accounts, then you can maintain it as
*function test(%acc1%,%acc2%)
%acc1% * %acc2%
*endfunction
Now in your dimension formula, for the member, you can write the formula as
test(Account1, Account2)
Hope you got my point.
The bold text has been changed to formula from dimension

"The Connection to Microsoft Exchange is unavailable" when adding second Exchange account to Outlook 2013

I have a problem that I've found to be typical, just haven't found anything that describes my exact problem.
I'm having trouble adding a second Exchange 2010 server account to Outlook 2013 in one of the computers of the domain. Outlook 2013 will complain with "The Connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete
this action".
I've Googled and found many threads with the same error... however most of those seem to be either a problem with the server, or the Global Catalog in Active Directory, or the "connection method" (I've tried all found solutions to no avail).
This is not the case, since the first account is added with absolutely no problem. It can send and receive and I can delete the outlook profile and recreate it and it'll give no problems. I have this problem only when adding a second account.
This is a fresh Windows 8.1 install with an up-to-date Outlook 2013. I have other computers in the same domain and network, with the same setup (Win 8.1 + Outlook 2013) configured with two exchange accounts with no problem.
There are no connectivity problems, I can access that same account through OWA and in other computers on the network... the Global Catalog seems to be fine (shows two active DCs, which is correct).
I've tried deleting and recreating the outlook profiles, repairing the outlook installation, even deleting all outlook files in AppData and letting it recreate them, with no success.
Any hints of what could be going on?
Before I speak, I have something important to say.

Hi Javier,
Thank you for the update.
I have tested on my lab and get following result.
Lab: Exchange 2010, CAS Array (CAS01+CAS02), MBX01, DC
Type Server Field
Check name result
Changed Server Field
CAS01.domain.com
Yes
CASArray.domain.com
CASArray.domain.com
Yes
CASArray.domain.com
DC.domain.com
Yes
CASArray.domain.com
MBX01.domain.com
No
"The Connection to Microsoft Exchange is unavailable"
Based on my knowledge, the reason why inputing DC FQDN in the Server Field fixes this issue is that Outlook performs AD Lookup and finds the account configuration from AD, then back the CAS Array FQDN in the Server Field instead of DC FQDN.
Exchange 2010 is different from Exchange 2013, if you are using Exchange 2013, we need to input MailboxServerGUID.domain.com into Server Field.
If there is anything I’ve misunderstood, please don’t hesitate to let me know.
Thanks,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Error when adding a partition to a materlialized view

Hi,
I am getting this error when adding a partition to a materialized view.
ALTER MATERIALIZED VIEW mvedw.MV_CLM_CAPITN_F ADD PARTITION MAR2013 VALUES LESS THAN ('201304')
ERROR at line 1:
ORA-14074: partition bound must collate higher than that of the last partition
Please advise.
Regards,
Narayan

SQL> select TABLE_OWNER,TABLE_NAME,PARTITION_NAME,HIGH_VALUE from dba_tab_partitions where table_name =
'MV_CLM_CAPITN_F' order by PARTITION_NAME 2
3 ;
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F APR2009 '200905'
MVEDW MV_CLM_CAPITN_F APR2010 '201005'
MVEDW MV_CLM_CAPITN_F APR2011 '201105'
MVEDW MV_CLM_CAPITN_F APR2012 '201205'
MVEDW MV_CLM_CAPITN_F AUG2009 '200909'
MVEDW MV_CLM_CAPITN_F AUG2010 '201009'
MVEDW MV_CLM_CAPITN_F AUG2011 '201109'
MVEDW MV_CLM_CAPITN_F AUG2012 '201209'
MVEDW MV_CLM_CAPITN_F DEC2008 '200901'
MVEDW MV_CLM_CAPITN_F DEC2009 '201001'
MVEDW MV_CLM_CAPITN_F DEC2010 '201101'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F DEC2012 '201301'
MVEDW MV_CLM_CAPITN_F FEB2009 '200903'
MVEDW MV_CLM_CAPITN_F FEB2010 '201003'
MVEDW MV_CLM_CAPITN_F FEB2011 '201103'
MVEDW MV_CLM_CAPITN_F FEB2012 '201203'
MVEDW MV_CLM_CAPITN_F FEB2013 '201303'
MVEDW MV_CLM_CAPITN_F JAN2009 '200902'
MVEDW MV_CLM_CAPITN_F JAN2010 '201002'
MVEDW MV_CLM_CAPITN_F JAN2011 '201102'
MVEDW MV_CLM_CAPITN_F JAN2012 '201202'
MVEDW MV_CLM_CAPITN_F JAN2013 '201302'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F JUL2009 '200908'
MVEDW MV_CLM_CAPITN_F JUL2010 '201008'
MVEDW MV_CLM_CAPITN_F JUL2011 '201108'
MVEDW MV_CLM_CAPITN_F JUL2012 '201208'
MVEDW MV_CLM_CAPITN_F JUN2009 '200907'
MVEDW MV_CLM_CAPITN_F JUN2010 '201007'
MVEDW MV_CLM_CAPITN_F JUN2011 '201107'
MVEDW MV_CLM_CAPITN_F JUN2012 '201207'
MVEDW MV_CLM_CAPITN_F MAR2009 '200904'
MVEDW MV_CLM_CAPITN_F MAR2010 '201004'
MVEDW MV_CLM_CAPITN_F MAR2011 '201104'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F MAR2012 '201204'
MVEDW MV_CLM_CAPITN_F MAR2013 '201304'
MVEDW MV_CLM_CAPITN_F MAY2009 '200906'
MVEDW MV_CLM_CAPITN_F MAY2010 '201006'
MVEDW MV_CLM_CAPITN_F MAY2011 '201106'
MVEDW MV_CLM_CAPITN_F NOV2009 '200912'
MVEDW MV_CLM_CAPITN_F NOV2010 '201012'
MVEDW MV_CLM_CAPITN_F NOV2012 '201212'
MVEDW MV_CLM_CAPITN_F OCT2009 '200911'
MVEDW MV_CLM_CAPITN_F OCT2010 '201011'
MVEDW MV_CLM_CAPITN_F OCT2011 '201111'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F OCT2012 '201211'
MVEDW MV_CLM_CAPITN_F SEP2009 '200910'
MVEDW MV_CLM_CAPITN_F SEP2010 '201010'
MVEDW MV_CLM_CAPITN_F SEP2011 '201110'
MVEDW MV_CLM_CAPITN_F SEP2012 '201210'
These are the list of partitions available.
Regards,
Narayan

Error when adding Essbase server...

Hi,
I installed Hyperion System 9.3.1 in my development machine and encounter the following error when adding a Essbase server in AAS for the first time.
Error: 1042017: Network error: The client or server timed out waiting to receive data using TCP/IP. Check network connections. Increase the NetRetryCount and/or NetDelay values in the ESSBASE.CFG file. Update this file on both client and server. Restart the client and try again.
I used the default user "admin" and password "password". I used my servername:10080 as the server name. I hope I am right.
Why is this happening? I tried changing netdelay settings but still get the same. Is this something else? Does this have anything to do with my TCP/IP settings? I am installing this on a virtual PC.
I couldn't find an answer in previous posts.
regards
h

The things that come to mind:
The server name you use should be the name of the virtual PC, not the machine it's running on. Also, depending on the settings for the Virtual PC environment, you may have to change the network options to allow it to be visible to the network, be in the right domain, etc...
The above may or may not get you any closer, the error message itself is just saying it can't receive a response from the server, which means the server never got the request or can't send a response back.
Good Luck,

Library error when adding contact or when logging in

The messenger server has a replica of the partition holding the users.
It's an OES 2 sp2 server, and the GW Messenger is 2.04.
Sometimes we see an error that says 'Library error' when adding a contact, or it doesn't show all users that exists with the search parameter given.
We also sporadically see a 'Library error' when some users log in to it.
Looking in the log I see an error that says 0xAE16 when users log in fails.
I can find the 0xAE11 error in the TID's but not the 0xAE16, I did find an article on the forums, mentioning this problem http://forums.novell.com/novell-prod...or-server.html, they mention memory problems, so it seems to me there is a bug that needs fixing.

I've disabled the '/diruseralias-"Internet EMail Address"' setting that was set up in the strtup.ma and strtup.aa scripts.
I've also, for now at least, chosen another replica.
I haven't seen the errors yet, so here's hoping...

Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled

When I try to add any new menu in my newly cloned instance I get this error:
Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled excpetion. ORA-04031.
Using Oracle EBS version 12.1.3.
Details:
Menu JOB_STRUCTURE_MENU
User Menu Name Job Strucure Menu
Menu Type Standard
Description Menu to add job, grade, and incentives
Seq = 1
Prompt = Enter and Maintain
Function = Combined Person & Assignment Form WF="US SHRMS TSKFLW
When I click save I get the error.
Any assistance would be greatly appreciated.
Thanks!

Please post the details of the application release, database version and OS.
When I try to add any new menu in my newly cloned instance I get this error:
Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled excpetion. ORA-04031.Is the issue with all menus or specific ones only?
Did AutoConfig complete successfully?
When I click save I get the error.
Any assistance would be greatly appreciated.Do you have any invalid objects in the database?
Any errors in the database log file?
Please obtain FRD log file for details about the error -- https://forums.oracle.com/forums/search.jspa?threadID=&q=FRD+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

I keep getting script errors when accessing Amazon Seller merchant pages. I get the following A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete. Script

I keep getting script errors when accessing Amazon Seller merchant pages. I get the following A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete. Script: chrome://spautofill/content/spOverlay.js:150, I also get js210 as well. I have cleared all cookies and history and unistalled Firefaox and reinstalled. Been thru my AVS and set the site as trusted in every possible place. Still get the problem. Do not get it with IE on same PC.
== URL of affected sites ==
https://sellercentral.amazon.co.uk

Same problem but with a different vendor site:
https://www.webvitamins.com/myfavorites.aspx
Not only does the page hang, but the other tabs also hang.
I contacted the vendor and their reply was "we were told that this looks like a script that is used by "Sticky Password", third-party software that must have been installed on your browser. However, our website did not install it and does not have anything to do with it." As far as I can tell, "Sticky Password" is not installed on my Firefox.
Same problem as above occurs, but with IE 8.0.6001.18702. Therefore, it is not unique to Firefox.
CAUSE DETERMINED: Have determined that this problem only occurs when Kaspersky Password Manager is installed. In Firefox, if the "Password Manager Autofill Engine" add-on is disabled, the problem goes away.

Help! 'Page not found error' when use the word 'account' on my web page!

I have encountered the weirdest problem when making some changes to my website.
When adding text within the tags everything is fine until I type the word 'account' or 'accounts' then I get a 'page not found' error.
Any other text can go between those tags, only the word 'account' causes the problem.
Any ideas?
(I am using Dreamweaver MX 2004 and its a PHP page)
I am so confused on this one, so any help would be much appreciated!
Thanks.

http://www.reformationassociates.com/ - This is the website, the weirdest part is, it is only happening on pages after they have been opened through Dreamweaver, so it's only once I access them that the problem occurs, I dont have to make any changes, just open them and they suddenly show up as 'page not found'.
http://www.reformationassociates.com/archive/Pinnacle.php is one of the pages that was accessed yesterday via Dreamweaver and we have had to change the word to 'acct' to stop the 'page not found' error.
Afriad I dont know what SSI files are? sorry....
Thanks.

I'm having error when adding a credit card

When adding a new credit card i'm having this error:
30225-dUmyRAAAAAAAAAAA-85fcf2e9-5dda-4dbd-9760-524ba8262578
I am contacted the Billing Support for
further help and he said that a part of this amount is taken. what happend ?? why you take my money and not active my dev account ??

Hello IRAQIIENG,
The error that you are receiving is related to 1 of 2 things.
Either you do not have the card setup to make payments over the internet or the card is not an acceptable card type.
If you have previously made purchases online with this card then it means that your card is not accepted by Microsoft as a form of payment.
Please use a different card and try your payment again.
If you still have questions please contact Dev Center Support.
-Miles
Windows and Windows Phone Dev Center Support
Send us your feedback about the Windows Platform

TableSorter errors when adding new data

so here is the deal:
I am using the TableSorter.java helper class with DefaultTableModel
from: http://java.sun.com/docs/books/tutorial/uiswing/components/table.html
It works great when the data is static and I get it for the first time. however, occationally, when adding new data I get a NullPointerException error.
in use:
DefaultTableModel.addRow()
DefaultTableModel.removeRow() and
DefaultTableModel.insertRow() methods.
Error:
java.lang.ArrayIndexOutOfBoundsException: 5
 at com.shared.model.TableSorter.modelIndex(TableSorter.java:294)
 at com.shared.model.TableSorter.getValueAt(TableSorter.java:340)
 at javax.swing.JTable.getValueAt(Unknown Source)
 at javax.swing.JTable.prepareRenderer(Unknown Source)...
code problem I:
 public Object getValueAt(int row, int column)
 return tableModel.getValueAt(modelIndex(row), column);
 }code problem II:
 public int modelIndex(int viewIndex)
 return getViewToModel()[viewIndex].modelIndex;
 }TableSroter class:
package com.shared.model;
import java.awt.*;
import java.awt.event.*;
import java.util.*;
import java.util.List;
import javax.swing.*;
import javax.swing.event.TableModelEvent;
import javax.swing.event.TableModelListener;
import javax.swing.table.*;
* TableSorter is a decorator for TableModels; adding sorting
* functionality to a supplied TableModel. TableSorter does
* not store or copy the data in its TableModel; instead it maintains
* a map from the row indexes of the view to the row indexes of the
* model. As requests are made of the sorter (like getValueAt(row, col))
* they are passed to the underlying model after the row numbers
* have been translated via the internal mapping array. This way,
* the TableSorter appears to hold another copy of the table
* with the rows in a different order.
* 
* TableSorter registers itself as a listener to the underlying model,
* just as the JTable itself would. Events recieved from the model
* are examined, sometimes manipulated (typically widened), and then
* passed on to the TableSorter's listeners (typically the JTable).
* If a change to the model has invalidated the order of TableSorter's
* rows, a note of this is made and the sorter will resort the
* rows the next time a value is requested.
* 
* When the tableHeader property is set, either by using the
* setTableHeader() method or the two argument constructor, the
* table header may be used as a complete UI for TableSorter.
* The default renderer of the tableHeader is decorated with a renderer
* that indicates the sorting status of each column. In addition,
* a mouse listener is installed with the following behavior:
* <ul>
* <li>
* Mouse-click: Clears the sorting status of all other columns
* and advances the sorting status of that column through three
* values: {NOT_SORTED, ASCENDING, DESCENDING} (then back to
* NOT_SORTED again).
* <li>
* SHIFT-mouse-click: Clears the sorting status of all other columns
* and cycles the sorting status of the column through the same
* three values, in the opposite order: {NOT_SORTED, DESCENDING, ASCENDING}.
* <li>
* CONTROL-mouse-click and CONTROL-SHIFT-mouse-click: as above except
* that the changes to the column do not cancel the statuses of columns
* that are already sorting - giving a way to initiate a compound
* sort.
* </ul>
* 
* This is a long overdue rewrite of a class of the same name that
* first appeared in the swing table demos in 1997.
* @author Philip Milne
* @author Brendon McLean
* @author Dan van Enckevort
* @author Parwinder Sekhon
* @version 2.0 02/27/04
public class TableSorter extends AbstractTableModel
 protected TableModel tableModel;
 public static final int DESCENDING = -1;
 public static final int NOT_SORTED = 0;
 public static final int ASCENDING = 1;
 private static Directive EMPTY_DIRECTIVE = new Directive(-1, NOT_SORTED);
 public static final Comparator COMPARABLE_COMAPRATOR = new Comparator()
 public int compare(Object o1, Object o2)
 return ((Comparable) o1).compareTo(o2);
 public static final Comparator LEXICAL_COMPARATOR = new Comparator()
 public int compare(Object o1, Object o2)
 return o1.toString().compareTo(o2.toString());
 private Row[] viewToModel;
 private int[] modelToView;
 private JTableHeader tableHeader;
 private MouseListener mouseListener;
 private TableModelListener tableModelListener;
 private Map columnComparators = new HashMap();
 private List sortingColumns = new ArrayList();
 public TableSorter()
 this.mouseListener = new MouseHandler();
 this.tableModelListener = new TableModelHandler();
 public TableSorter(TableModel tableModel)
 this();
 setTableModel(tableModel);
 public TableSorter(TableModel tableModel, JTableHeader tableHeader)
 this();
 setTableHeader(tableHeader);
 setTableModel(tableModel);
 private void clearSortingState()
 viewToModel = null;
 modelToView = null;
 public TableModel getTableModel()
 return tableModel;
 public void setTableModel(TableModel tableModel)
 if (this.tableModel != null)
 this.tableModel.removeTableModelListener(tableModelListener);
 this.tableModel = tableModel;
 if (this.tableModel != null)
 this.tableModel.addTableModelListener(tableModelListener);
 clearSortingState();
 fireTableStructureChanged();
 public JTableHeader getTableHeader()
 return tableHeader;
 public void setTableHeader(JTableHeader tableHeader)
 if (this.tableHeader != null)
 this.tableHeader.removeMouseListener(mouseListener);
 TableCellRenderer defaultRenderer = this.tableHeader.getDefaultRenderer();
 if (defaultRenderer instanceof SortableHeaderRenderer)
 this.tableHeader.setDefaultRenderer(((SortableHeaderRenderer) defaultRenderer).tableCellRenderer);
 this.tableHeader = tableHeader;
 if (this.tableHeader != null)
 this.tableHeader.addMouseListener(mouseListener);
 this.tableHeader.setDefaultRenderer
 new SortableHeaderRenderer(this.tableHeader.getDefaultRenderer())
 public boolean isSorting()
 return sortingColumns.size() != 0;
 private Directive getDirective(int column)
 for (int i = 0; i < sortingColumns.size(); i++)
 Directive directive = (Directive)sortingColumns.get(i);
 if (directive.column == column)
 return directive;
 return EMPTY_DIRECTIVE;
 public int getSortingStatus(int column)
 return getDirective(column).direction;
 private void sortingStatusChanged()
 clearSortingState();
 fireTableDataChanged();
 if (tableHeader != null)
 tableHeader.repaint();
 public void setSortingStatus(int column, int status)
 Directive directive = getDirective(column);
 if (directive != EMPTY_DIRECTIVE)
 sortingColumns.remove(directive);
 if (status != NOT_SORTED)
 sortingColumns.add(new Directive(column, status));
 sortingStatusChanged();
 protected Icon getHeaderRendererIcon(int column, int size)
 Directive directive = getDirective(column);
 if (directive == EMPTY_DIRECTIVE)
 return null;
 return new Arrow(directive.direction == DESCENDING, size, sortingColumns.indexOf(directive));
 private void cancelSorting()
 sortingColumns.clear();
 sortingStatusChanged();
 public void setColumnComparator(Class type, Comparator comparator)
 if (comparator == null)
 columnComparators.remove(type);
 else
 columnComparators.put(type, comparator);
 protected Comparator getComparator(int column)
 Class columnType = tableModel.getColumnClass(column);
 Comparator comparator = (Comparator) columnComparators.get(columnType);
 if (comparator != null)
 return comparator;
 if (Comparable.class.isAssignableFrom(columnType))
 return COMPARABLE_COMAPRATOR;
 return LEXICAL_COMPARATOR;
 private Row[] getViewToModel()
 if (viewToModel == null)
 int tableModelRowCount = tableModel.getRowCount();
 viewToModel = new Row[tableModelRowCount];
 for (int row = 0; row < tableModelRowCount; row++)
 viewToModel[row] = new Row(row);
 if (isSorting())
 Arrays.sort(viewToModel);
 return viewToModel;
 public int modelIndex(int viewIndex)
 return getViewToModel()[viewIndex].modelIndex;
 private int[] getModelToView()
 if (modelToView == null)
 int n = getViewToModel().length;
 modelToView = new int[n];
 for (int i = 0; i < n; i++)
 modelToView[modelIndex(i)] = i;
 return modelToView;
 // TableModel interface methods
 public int getRowCount()
 return (tableModel == null) ? 0 : tableModel.getRowCount();
 public int getColumnCount()
 return (tableModel == null) ? 0 : tableModel.getColumnCount();
 public String getColumnName(int column)
 return tableModel.getColumnName(column);
 public Class getColumnClass(int column)
 return tableModel.getColumnClass(column);
 public boolean isCellEditable(int row, int column)
 return tableModel.isCellEditable(modelIndex(row), column);
 public Object getValueAt(int row, int column)
 return tableModel.getValueAt(modelIndex(row), column);
 public void setValueAt(Object aValue, int row, int column)
 tableModel.setValueAt(aValue, modelIndex(row), column);
 // Helper classes
 private class Row implements Comparable
 private int modelIndex;
 public Row(int index)
 this.modelIndex = index;
 public int compareTo(Object o)
 int row1 = modelIndex;
 int row2 = ((Row) o).modelIndex;
 for (Iterator it = sortingColumns.iterator(); it.hasNext();)
 Directive directive = (Directive) it.next();
 int column = directive.column;
 Object o1 = tableModel.getValueAt(row1, column);
 Object o2 = tableModel.getValueAt(row2, column);
 int comparison = 0;
 // Define null less than everything, except null.
 if (o1 == null && o2 == null)
 comparison = 0;
 } else if (o1 == null)
 comparison = -1;
 } else if (o2 == null)
 comparison = 1;
 } else {
 comparison = getComparator(column).compare(o1, o2);
 if (comparison != 0)
 return directive.direction == DESCENDING ? -comparison : comparison;
 return 0;
 private class TableModelHandler implements TableModelListener
 public void tableChanged(TableModelEvent e)
 // If we're not sorting by anything, just pass the event along.
 if (!isSorting())
 clearSortingState();
 fireTableChanged(e);
 return;
 // If the table structure has changed, cancel the sorting; the
 // sorting columns may have been either moved or deleted from
 // the model.
 if (e.getFirstRow() == TableModelEvent.HEADER_ROW)
 cancelSorting();
 fireTableChanged(e);
 return;
 // We can map a cell event through to the view without widening
 // when the following conditions apply:
 // a) all the changes are on one row (e.getFirstRow() == e.getLastRow()) and,
 // b) all the changes are in one column (column != TableModelEvent.ALL_COLUMNS) and,
 // c) we are not sorting on that column (getSortingStatus(column) == NOT_SORTED) and,
 // d) a reverse lookup will not trigger a sort (modelToView != null)
 // Note: INSERT and DELETE events fail this test as they have column == ALL_COLUMNS.
 // The last check, for (modelToView != null) is to see if modelToView
 // is already allocated. If we don't do this check; sorting can become
 // a performance bottleneck for applications where cells
 // change rapidly in different parts of the table. If cells
 // change alternately in the sorting column and then outside of
 // it this class can end up re-sorting on alternate cell updates -
 // which can be a performance problem for large tables. The last
 // clause avoids this problem.
 int column = e.getColumn();
 if (e.getFirstRow() == e.getLastRow()
 && column != TableModelEvent.ALL_COLUMNS
 && getSortingStatus(column) == NOT_SORTED
 && modelToView != null)
 int viewIndex = getModelToView()[e.getFirstRow()];
 fireTableChanged(new TableModelEvent(TableSorter.this,
 viewIndex, viewIndex,
 column, e.getType()));
 return;
 // Something has happened to the data that may have invalidated the row order.
 clearSortingState();
 fireTableDataChanged();
 return;
 private class MouseHandler extends MouseAdapter
 public void mouseClicked(MouseEvent e)
 JTableHeader h = (JTableHeader) e.getSource();
 TableColumnModel columnModel = h.getColumnModel();
 int viewColumn = columnModel.getColumnIndexAtX(e.getX());
 int column = columnModel.getColumn(viewColumn).getModelIndex();
 if (column != -1)
 int status = getSortingStatus(column);
 if (!e.isControlDown())
 cancelSorting();
 // Cycle the sorting states through {NOT_SORTED, ASCENDING, DESCENDING} or
 // {NOT_SORTED, DESCENDING, ASCENDING} depending on whether shift is pressed.
 status = status + (e.isShiftDown() ? -1 : 1);
 status = (status + 4) % 3 - 1; // signed mod, returning {-1, 0, 1}
 setSortingStatus(column, status);
 private static class Arrow implements Icon
 private boolean descending;
 private int size;
 private int priority;
 public Arrow(boolean descending, int size, int priority)
 this.descending = descending;
 this.size = size;
 this.priority = priority;
 public void paintIcon(Component c, Graphics g, int x, int y)
 Color color = c == null ? Color.GRAY : c.getBackground();
 // In a compound sort, make each succesive triangle 20%
 // smaller than the previous one.
 int dx = (int)(size/2*Math.pow(0.8, priority));
 int dy = descending ? dx : -dx;
 // Align icon (roughly) with font baseline.
 y = y + 5*size/6 + (descending ? -dy : 0);
 int shift = descending ? 1 : -1;
 g.translate(x, y);
 // Right diagonal.
 g.setColor(color.darker());
 g.drawLine(dx / 2, dy, 0, 0);
 g.drawLine(dx / 2, dy + shift, 0, shift);
 // Left diagonal.
 g.setColor(color.brighter());
 g.drawLine(dx / 2, dy, dx, 0);
 g.drawLine(dx / 2, dy + shift, dx, shift);
 // Horizontal line.
 if (descending) {
 g.setColor(color.darker().darker());
 } else {
 g.setColor(color.brighter().brighter());
 g.drawLine(dx, 0, 0, 0);
 g.setColor(color);
 g.translate(-x, -y);
 public int getIconWidth()
 return size;
 public int getIconHeight()
 return size;
 private class SortableHeaderRenderer implements TableCellRenderer
 private TableCellRenderer tableCellRenderer;
 public SortableHeaderRenderer(TableCellRenderer tableCellRenderer)
 this.tableCellRenderer = tableCellRenderer;
 public Component getTableCellRendererComponent(JTable table,
 Object value,
 boolean isSelected,
 boolean hasFocus,
 int row,
 int column)
 Component c = tableCellRenderer.getTableCellRendererComponent(table,
 value, isSelected, hasFocus, row, column);
 if (c instanceof JLabel) {
 JLabel l = (JLabel) c;
 l.setHorizontalTextPosition(JLabel.LEFT);
 int modelColumn = table.convertColumnIndexToModel(column);
 l.setIcon(getHeaderRendererIcon(modelColumn, l.getFont().getSize()));
 return c;
 private static class Directive
 private int column;
 private int direction;
 public Directive(int column, int direction)
 this.column = column;
 this.direction = direction;
}any input will be appreciated.
thanks
Peter

The code you posted doesn't help us at all. Its just a duplicate of the code from the tutorial. The custom code is what you have written. For example do you update the TableModel from the Event Thread? Do you update the SortModel or the DefaultTableModel? If you actually provide your test code and somebody has already downloaded the sort classes, then maybe they will test your code against the classes. But I doubt if people will download the sort classes and create a test program just to see if they can duplicate your results (at least I know I'm not about to).

TableAdapter Configuration Wizard gives error when adding new TableAdapter

Hi,
I recently downloaded and installed the ODT for visual studio on my computer. I am running VS2008 on Windows 7 64-bit. I am able to create an ODP.NET connection to the Oracle XE 10.2g instance that is running on my computer with no problems and use that connection to browse the database. When I add a DataSet to my project, and start adding TableAdapters to the DataSet, I am getting errors. In an attempt to figure out what the problem is, I have followed various scenarios. I will describe each scenario, and what the end result is, and then after I have described them all, I will explain what I think the problem might be. Here are the different scenarios I have used:
Scenario 1:
From the Server Explorer, highlight ALL of the tables in my schema and drag them to the designer (all table adapters are added with no issues). I can add additional queries to each of the TableAdapters and then change the additional queries by right clicking and choosing "Configure". This all works with no issues. However, on certain TableAdapters, if I try to modify the primary query (Fill,GetData()), I can open the query editor just fine, change various settings, etc, but when I click on "Finish" I get the following error:
Configure TableAdapter TABLENAME failed.
Index was outside the bounds of the array.
Scenario 2:
From the Server Explorer, drag tables from my schema onto the designer one at a time. Some tables get added just fine, but for the rest of them, I get the following error:
Failed to merge object(s).
Index was outside the bounds of the array.
Scenario 3:
On the Dataset Designer, add tables one at a time by right clicking and choosing "Add -> TableAdapter" and then using SQL to define the query for each table. Some tables get added just fine, but for the rest of them, I get the following error:
Failed to add TableAdapter.
Index was outside the bounds of the array.
Ok... now that I have described all of the different scenarios, I will explain what I think the problem is, and why. Based on my research, I believe the underlying problem has to do with Foreign Key Constraints on the various tables. While working on Scenarios 2 & 3, the same exact tables worked just fine in both scenarios. When I started looking at the definitions for the tables in my schema, it turns out that all of the tables that failed had foreign key constraints defined. When I remove the FK constraints from a table, I am then able to add it to my dataset and change the default query with no problems. My original application used the System.Data.OracleClient provided by Microsoft. When adding my tableadapters using the microsoft data provider, the FK relations are automatically generated for me in the designer, but not with the Oracle Data Provider
I would be happy to provide you with the DDL that I used for creating my schema (it is not very big) if needed.
Thanks,
Jim

Sorry let me clarify some of the config a little more.
MAIL101 - Exch 2013
MAIL102 - Exch 2013
AP104 - Witness (strictly a witness nothing else on this machine)
EDGE01 - Exch 2007 Edge
CAS01 - Exch 2007 Hub/CAS load balancer for CAS02/03
CAS02 - Exch 2007 Hub/CAS
CAS03 - Exch 2007 Hub/CAS
MBOX01 - Exch 2007 Mail cluster
MBOX02 - Exch 2007 Mail cluster node
MBOX03 - Exch 2007 Mail cluster node
RDC01, RDC02, RDC03 - all 2008 R2 root domain controllers for rootdomain.rootdomain
DC01, DC02, DC03, DC04 - all 2008 R2 domain controllers for us.rootdomain.rootdomain
All DCs are Global Catalogs.
I can ping all DCs and root DCs fromboth MAIL101 and 102
The Exchange Replication service is running on both MAIL101 and 102.
DC03 is in the same site as the MAIL101/102 servers so I'll run all replication tests from here.
DCDIAG comes back with all tests passed.
repadmin /replsum comes back with 0 fails and no errors largest delta for any intersite communication is 13min.
When I run Test-ReplicationHealth -Identity MAIL101 and also 102 they both come back as everything passed. No errors.

Error when adding a disk to Cluster Shared Volumes

When adding a disk to Cluster Shared Volumes via Failover Cluster Manager, I get a couple of errors.
Event ID 5145 in System Log:
While adding the disk ('Cluster Disk 1') to Cluster Shared Volumes, setting explicit snapshot diff area association for volume ('\\?\Volume{420e2cc4-4fb4-41be-afb1-65f2ee62457a}\') failed with error 'HrError(0x8004230d)'. The only supported software snapshot
diff area association for Cluster Shared Volumes is to self.
Cluster disk resource 'Cluster Disk 1' failed to delete a software snapshot. The diff area on volume '\\?\Volume{420e2cc4-4fb4-41be-afb1-65f2ee62457a}\' could not be dissociated from volume '\\?\Volume{420e2cc4-4fb4-41be-afb1-65f2ee62457a}\'. This
may be caused by active snapshots. Cluster Shared Volumes requires that the software snapshot be located on the same disk.
Any ideas why I'm getting this error? This disk was previously added as a CSV to different Windows failover cluster, if that matters. Thanks.

Hi,
As the disk was previously used as a CSV, I assume there is still data on it.
Please check if any VSS snapshot created on that disk. If so, delete them and re-add it as a CSV to see the result - a quick way is to backup important files and perform a re-format if you cannot confirm.
If you have any feedback on our support, please send to [email protected]

Error when adding a WLC to WCS

When adding a WLC to WCS I get this error: Failed to add device to WCS Reason:
COMMON-1: Some unexpected internal error has occured. If the problem persists please report to the Tech Support.
WCS 7.0.164.0 was upgraded from 5.2.110.0 because the WLC were running 7.0.98.0
WLC4404-100 7.0.98.0 (Already in WCS)
WLC4402-12 7.0.98.0 (Changed the ip address of the management and ap manager. Was in WCS but deleted from WCS prior to the ip address change and prior to the WCS being upgraded)
I know that the snmp strings are fine and that the WLC's both respond to snmp get commands.
The intial WCS upgrade from 5.2.110.0 to 7.0.164.0 didn't require the previous version to be uninstalled. After the upgrade and restoring the WCS from backup. I was getting the error posted above. We uninstalled WCS and re-installed WCS from scratch and still we are getting the same error. We tried restarting the WCS services and also the VM box as well and not luck. I was wondering if the WCS has the old ip and mac address of the WLC4402-12 in the database and that is why i'm getting this error.
I did delete and try different snmp community strings with no luck with WCS. Again, snmp is working since I can do snmp get from the WLC's.

Scott,
This is the issue:
com.cisco.common.persistence.transaction.TransactionException: Null value was assigned to a property of primitive type setter of com.cisco.server.managedobjects.aaa.GuestUserTemplateCG.userStatus
Could be an existing bug or a new one. I cant say unless I look into your setup.

Error when adding Amazon AWS account to CAL

Similar Messages

Maybe you are looking for