Error when changing a Company Code for a given Cost Center

Hello Friends ,
                         I'm trying to modify a company code value for a given cost center in KS02 and I get the below error. The error message receommends to change the analysis period ( not sure what it is..) but when I click edit > Analysis period from tool bar I  still get the below message , is there way to get over come this issue ?
Thanks in advance ,
Field change Company Code is not possible (transaction data already exists)
Message no. KS134
Diagnosis
To ensure the consistency of existing data, you can only change object Company Code if no transaction data exists in the change period; that is, neither plan data nor actual data has been posted.
As transaction data already exists, it is not possible to change objects in this time period.
Procedure
If you still want to change the object, select a suitable change interval by choosing "Edit -> Analysis period...".

Thank you Vishal . I have 3 cost centers with 2 having validity period ( from 01/01/1950 to 12/31/9999) and third one had 2 records 12/30/2004 to 12/26/2009 and 12/27/2009 to 12/31/9999 ) for the third one it did allow to change the validty period and I could change the comapny code for my profit center . But for first 2 somehow it doesnt allow to change the validity periods. And when I run some reports against these 2 cost centers to see if there is any activity I dont see any data .
Could you please give your ideas ?
Thanks alot .

Similar Messages

  • Changing a company code for a plant/profit center

    I have a situation where a company code has to be changed for a few plants/profit centers.
    Has anybody had experieced that before? is it even doable??

    You have hope -  We merged company codes at my business and the plants and profit centers changed from one CoCde to the other. 
    Profit center are not assigned to a company code they are assigned to a contolling area. There is "Company code assignment for profit center"  ie What company codes can the PC be used in.
    Plants???  If you don't get an answer here, you may want to try the MM forum for help.

  • Change of company code for equipment

    hi! PM gurus,
    Can anyone tell me how to change co cd of an equipment?
    and also how to dismantle the equipment?
    helpful answers will be rewarded.
    Thanks.

    Hi Vaibhav......
    It is possible to change the Company Code of an equipment, but there are some basic needs to be fulfilled for that.........
    > Both the Company Codes (one in which Equipment exists & the one in which you want the equipment to be transferred) should fall under same Controlling Areas & Chart of Accounts.
    As far as dismantle of equipment is concerned, you have two options:
    > Go to Equipment Master - Structure Tab - Function Location - Click on Icon on right side, select dismantle.......in this equipment is dismantled & can be instaaled at other Function Location.
    > but if you have to dismantle & equipment & put it in to the storage, go for Tcode - IE4n
    Hope, this will help you.........
    Regards

  • Cannot change company code for functional location in PM module

    Dear Gurus,
    When I try to change the maint plant for topmost level hierarchy FL, I get error. So I cleared the data in organization tab (planning plant....) and tried to click location tab but receive warning (After changing PM planning plant, please check dependent objects) & cannot proceed. Kindly advice me on how I can change the company code for all the functional location in the plant.
    Thank you.

    Dear Gurus,
    Is there any way I can mass change the company code for all FLs?
    Thank you.

  • Validation for GL Account & Cost Center combination

    hi. i want to prevent gl postings to combination of gl account 123 and cost center abc.  the validation created via ggb0 under financial accounting, line items looks like this:
    PreReq:    BSEG-KOSTL = 'abc'
    Check:      BSEG-HKONT = '123'
    Message:  "Invalid Acct/Cost Ctr combo"
    but when i do f-02 for gl 123 cost center abc, the warning message doesnt appear.
    any insight is much appreciated!

    Hello,
      I did the same in our org. change the condition of check into prerequiste and prerequisite into check then it will work and in OB28 activate the same for your company code.
    Regards,
    sankar

  • Process for changing a company code

    Looking for information regarding the process required to change a company code.  We have an existing company A and need to change to company 100.
    Areas that I need to address are FI/CO, SD, MM.  The existing account balances of company A need to be transfered into company 100.
    Thanks,
    Robert
    Edited by: Robert Roe on Mar 5, 2008 1:55 PM
    Edited by: Robert Roe on Mar 5, 2008 1:56 PM

    hi,
    i found this.
    Sometimes during your IDOC/BAPI communication you will get error "No global company code is assigned to the company code" & Message no. FC 326 in Idoc status record.
    This problem is very frustrating. The solution is simple, but hard to find.
    There is a very long menu to get there. It is: IMG > Basis Components > Application Link Enabling (ALE) > Modelling and Implementing Business Processes > Cross-Application Settings > Global Organizational Units > Cross-System Company Codes
    1. Create a cross-system company code.
    2. Assign the cross-system company code to a chart of accounts to which it is also assigned on the central system. This setting is needed on the decentral systems in order to determine the chart of accounts of the company code on the central system.
    3. Assign cross-system company codes to the local company codes. Specify the identifiers of the relevant cross-system company codes for each of the individual company codes.

  • Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. what now?

    Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. What now?

    I am getting this error message as well. I have just downloaded Lightroom recently. I try to click on Lightroom / preferences....and nothing happens. I tried to uninstall and it is greyed out so I can't do that either. Suggestions? Please help?

  • Creation of a PO with reference to a contract - change of company code

    Hi experts,
    When a PO is made with reference to an existing contract, the company code is copied automatically from the contract into the PO.
    Do you have an idea if it's possible to modify this in the PO? So that we can choose another company code?
    Thanks,
    Michaë

    Ofcourse you can change the company code in the purchase order.
    However please check that same purchase organization is responsible for both the company codes.
    However it might give you an error that plant is not assigned to the company code.
    Therefore the best way is to create the PO without reference of that contract OR you can create a contract for the company code in PO and then create a PO with the same.

  • Error while creating inter-company invoice  for stock transport

    Hi ,
    I am facing following errors while creating inter-company invoice for STO order.
    We have scenario where standard PO is created in  company code A  & then replenishment delivery is created in company code B.While raising inter-company invoice to company code A, we are facing problem.
    In replenishment delivery we have 10 line items. But  when we try to do inter company invoice through VF01/VF04 we get following log
    XXXXXXXXXX(delivery Number) 000000 Customer XXXXX: Customer master table KNVV is missing (VF-022)
    XXXXXXXXXX (delivery Number)000010 The bill-to party could not be determined (VF-047)
    XXXXXXXXXX (delivery Number)000010 The payer could not be determined (VF-048)
    With this first line item from delivery is not flows to invoice & if we saves this invoice then it is get saved with account determination error as some of the data does not comes into invoice header like account assignment group for customer, Payment term, destination country,region, tax classification for customer etc. That means invoice gets created without first line item from delivery with account determination error & so,no accounting document gets generated.
    I checked customer master for all SP,SH,BP,PY they are correctly maintained.This was working fine few months back, but not working now.
    If anybody had come across such kind of scenario, your valuable inputs will be highly appreciated.
    Thanks & kind regards,
    Ganesh Palatshaha

    Hello
    Kindly check the sales area of customer involved, whether the customer maintain with sales area for STO.
    If that is note the case the refer following link:
    - Error VF 047 & 048 while creating Inter company billing
    Regards
    JP

  • How to setup a company code for material management

    Hi,
    While creating material in MM01, in sales org tab, when I gave plant XXXX, it is giving an error "Company code YYYY is not setup for material management".
    So can you help me , how to setup a company code for material management
    Help is appreciated
    thanks
    DIL

    Hello Sendil,
    You can maintain it with trns code OMSY or MMPI/MMPV.
    Hope this helps
    Regards
    Arif Mansuri

  • Change of Company Code Currency

    Dear All,
    We have a scenario of changing the company code currency. We have an option here.
    Either to
    i) change the currency of a live company code with postings or
    ii) to change the currency of a live company code that has no postings made so far.
    We are sure that we can recommend the second option, however is there any precaution we need to take before making the actual change for the ii) option?
    Anyone who had done this before please let us know what are the cautionary measures to be taken if any?
    Regards,
    Asokan.

    Asokan,
    If the company code has had no postings made so far after going live, then you have a relatively simple situation, and should not face any major problems.
    However, it is essential that the company code not have any postings made in ANY of the systems, including DEVELOPMENT and TEST systems. Go ahead and try to change the company code currency in transaction OX02 in your DEV environment. SAP will not allow you to change the currency for a company code where your current system has postings made to it. Also, if and when you are able to make the change and try to move the TR for this change, your test system (target system for the TR movement) should also have this situation, else there's a good chance the TR might fail in the TEST system.
    There is a transaction for Reset Company Code Data - I don't recollect more details, but do some homework and you'll find it easily. You'll need that before you can undertake this change.
    Read the caution in the transaction for "Reset Company Code Data" carefully as that is irreversible, and is highly disruptive.
    Hope this helps.

  • Blocking a company code for all transactions.

    A compnay code is having two plants assigned. No open documents in that company code.
    How to block the company code for any transactions including purchase document creation?
    However all the past data to be available for viewing and reference.
    Thanks in advance.
    Narasimharao

    Dear Narasimharao ,
    You can remove authorization from user profile to use this company code.
    And when someone try to save any documents , error message will be send.
    hope this could help you.
    best regards,
    Carlos Moçatto

  • Can we change the company code posting periods to previous periods?

    Hello folks,
    I wated to change company code posting periods to previous posting periods.Right now the posting period for company code is 04/2008, and I want to make it to 10/2007. Is it possible.
    I am doing this in Dev Sand box.
    Thanks
    Ravi

    Path: SPRO->Logistics-General->Material master->Basic Settings->Maintain Company Codes for Materials Management.
    In this configuration, you can change the posting periods. As mentioned earlier in one of the replies, this change is done with utmost caution as this could result in to data inconsistencies, if left open for a longer period of time.. It is advised to change this setting when no other document postings are allowed by other users...

  • Set Up Payment Methods per Company Code for Payment

    Hi All,
    Can any expert please suggest whether do we need to enter only paying company codes while defining the payment methods per company code or enter all company codes.
    Ex: We have 10 company codes for which there are 3 paying company codes. After defining the payment methods in the country, while defining payment methods per company code do we need to  define for only 3 paying company codes or for all 10 company codes. Because when you are paying through one company code on behalf of three company codes, how does it make sense having the payment method in company codes which are not paying. I hope my query is sensible.
    Thanks&Regards
    Srinivas

    Generally Payment method is defined for a customer at Company code level and Sales area level. Through Partner function we can control who has to make payment. In your case , if you need to define different customer as payer you can do so in KNVP table. while making sales order payment terms will pick from Payer of the Sold to patry customer.
    Not sure why do you wants to link to Company code

  • Set up Payment Methods Per Company code for Transaction

    Hi All,
    Can any expert please suggest whether do we need to enter only paying company codes while defining the payment methods per company code or enter all company codes.
    Ex: We have 10 company codes for which there are 3 paying company codes. After defining the payment methods in the country, while defining payment methods per company code do we need to define for only 3 paying company codes or for all 10 company codes. Because when you are paying through one company code on behalf of three company codes, how does it make sense having the payment method in company codes which are not paying. I hope my query is sensible.
    Thanks&Regards
    Srinivas

    Hi,
    You should define the payment method in all the 10 company codes regarding they are the paying or non paying company code.
    If you are not defining them they you will not have the option to select the payment for that particular company code.
    regards
    pbb

Maybe you are looking for

  • How to use a different HttpSessionCookieHelperImpl implementation

    Hi, I found out that the module retrieval methods in my Jsp application sometimes fail with a NumberFormatException. I tracked the issue to the HttpSessionCookieHelperImpl class: it seems that it sometimes retrieves URLEncoded values (not found out w

  • A film I downloaded is no longer available in iTunes Store

    A film I have purchased from the iTunes Store is no longer listed when i do a search (top right hand of iTunes application.  For the avoidance of doubt the podcast associated with the film does come up so I am sure I am typing the name correctly) and

  • Fiscal Year Not allowed while creating the Process order (COR1)

    Hi Friends, My Indian client is following the Fiscal year of 2011 for the period of April 2010 to March 2011). We have gone live one month before. But now the problem we are facing is while creating the process order (T.Code COR1) system gives the er

  • The computer has rebooted from a bugcheck. The bugcheck was: 0x00000050

    I would like to know how to troubleshoot this issue. I did the firmware/driver/patch updates for multiple Hyper-V cluster just before the Christmas break. We have all HP DL580 boxes. All went well however, in observed issues with two nodes on a clust

  • Using the instance manager to control subforms at run time

    Hi,everybody. I encountered a question when I put the code "subFormName.instanceManager.addInstance(1);" into the subForm's initialize event to dynamic create a new subForm(it's a XDP document).It create 3 new subForms below the original subForm,but