Error when compiling: "asm/errno.h: No such file or directory"

Ok, so I've got this error while compiling some app written in C:
In file included from /usr/include/bits/errno.h:25,
from /usr/include/errno.h:36,
from /usr/include/python2.6/Python.h:40,
from config.c:18:
/usr/include/linux/errno.h:4:23: error: asm/errno.h: No such file or directory
make: *** [config.o] Error 1
I've tried to google it, people said I needed to make some symlinks, but it didn't work. I've also tried update (pacman -Syu), but that didn't help as well. Do you have any solutions?
Thanks

Thanks,
I was searching for a soltion like GCC Path and something with include or something but this worked instead..:)

Similar Messages

  • So I am trying to copy my hard drive "Macintosh HD" to an external hard drive, i want to use Terminal and have tried many ways. For example cp -r /Volumes/"Macintosh HD" /Volumes/"NO NAME". When i do it says No such file or directory. Ideas?

    So I am trying to copy my hard drive "Macintosh HD" to an external hard drive, i want to use Terminal and have tried many ways. For example cp -r /Volumes/"Macintosh HD" /Volumes/"NO NAME". When i do it says No such file or directory. Ideas?

    The reason that threadjacking is frowned on (as mentioned in the terms use which you can read by clicking the link to the right on this page) is for the most part a practical one:
    By starting your own thread your problem can get individual attention, focussed on your particular set of circumstances.
    By joining somebody else's thread it becomes tricky to answer more than one question at the same time, and can lead to confusion for both parties.
    So if you don't mind the minor inconvenience, please start your own thread (in the correct forum) so we can get to grips with your particular problem!

  • Simulation error: C:\USERS... No such file or directory

    When I try to simulate I get this error: C:\USERS\LISA: No such file or directory

    Hello,
    Please send us more details:
    - Multisim version/edition
    - Operating System
    - Do you use an Administrator account in your PC?
    - Do you get the error with a specific schematic?
    Regards,
    Fernando D.
    National Instruments

  • %Error opening tftp://...(No such file or directory)

    I am trying Software Distribution by Image choosing from my Software Repository.
    Getting the title as a failure from SWIM.
    Need help.
    kat

    Thank you for your response. It turns out I had a third party program that was changing the file designation of the .bin and was trying to mount it in a virtual drive. after turning that off it worked like a charm!

  • No such file or directory - Deploying BC4Js

    Hi,
    I've deployed a few BC4J as EJBs to Jserver, but this time I get the following error:
    F:/jdev31/myclasses/jboEJB.jar: No such file or directory
    *** Errors occurred while deploying the EJB to JServer ***
    Has anyone come across this and know why this is happening?
    Mark
    null

    My guess would be to go through all libraries defined in your project and check their class paths.
    Look for the path f:... that causes problem.
    If you can not find it there look in the deployement profile under libraries and archives.
    Once you located where the path is used, use Win Explorer Find File to find location jboEJB.jar and change the JDeveloper path to point there.
    It may help, but then you never know. I've also found that restarting JDeveloper helps for some problems.
    /Michael

  • Newbie problem - enlightenment: No such file or directory

    Hi, I'm new in Archlinux and I've found a ridiculous problem after install enlightenment.
    I have put:
    exec /opt/e17/bin/enlightenment_start
    on ~/.xinitrc, but drops the error:
    -bash: /opt/e17/bin/enlightenment_start: No such file or directory
    but the file IS there!! I can see it in the directory, and I can tab the command, but bash don't found it...
    I tryed others binaries in the directory and works, but only the *-config, the others don't work, no one.
    Please, anyone know why can happen this?? I'm getting mad trying to find a solution...
    PD.: Sorry for my poor english ^_^

    Sorry for the mistake
    [terseus@terseus-pc ~] ls -l /opt/e17/bin/enlightenment_start
    -rwxr-xr-x 1 root root 8908 Mar 11 14:55 /opt/e17/bin/enlightenment_start
    I think the permissions are right, I tryed with root but doesn't work.
    PD.: The webpage of Archlinux is really great! The site and the forum work perfectly even from links

  • Make error when compiling gspca

    Hi, ive downloaded gspca source and modify it in order to get my webcam working, but when i type 'make all' i get:
    [jk@arch4linux gspca-7876678e39df]$ sudo make all
    make -C /home/jk/gspca-7876678e39df/v4l all
    make[1]: se ingresa al directorio `/home/jk/gspca-7876678e39df/v4l'
    creating symbolic links...
    make -C firmware prep
    make[2]: Entering directory `/home/jk/gspca-7876678e39df/v4l/firmware'
    make[2]: Leaving directory `/home/jk/gspca-7876678e39df/v4l/firmware'
    make -C firmware
    make[2]: Entering directory `/home/jk/gspca-7876678e39df/v4l/firmware'
    make[2]: Nothing to be done for `default'.
    make[2]: Leaving directory `/home/jk/gspca-7876678e39df/v4l/firmware'
    Kernel build directory is /lib/modules/2.6.30-ARCH/build
    make -C /lib/modules/2.6.30-ARCH/build SUBDIRS=/home/jk/gspca-7876678e39df/v4l modules
    make[2]: Entering directory `/usr/src/linux-2.6.30-ARCH'
    CC [M] /home/jk/gspca-7876678e39df/v4l/firedtv-1394.o
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:21:17: error: dma.h: No such file or directory
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:22:21: error: csr1212.h: No such file or directory
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:23:23: error: highlevel.h: No such file or directory
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:24:19: error: hosts.h: No such file or directory
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:25:22: error: ieee1394.h: No such file or directory
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:26:17: error: iso.h: No such file or directory
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:27:21: error: nodemgr.h: No such file or directory
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:37: warning: 'struct hpsb_iso' declared inside parameter list
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:37: warning: its scope is only this definition or declaration, which is probably not what you want
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c: In function 'rawiso_activity_cb':
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:53: error: dereferencing pointer to incomplete type
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:54: error: implicit declaration of function 'hpsb_iso_n_ready'
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:61: error: dereferencing pointer to incomplete type
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:62: error: implicit declaration of function 'dma_region_i'
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:62: error: dereferencing pointer to incomplete type
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:62: error: expected expression before 'unsigned'
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:63: warning: assignment makes pointer from integer without a cast
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:64: error: dereferencing pointer to incomplete type
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:68: error: dereferencing pointer to incomplete type
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:82: error: implicit declaration of function 'hpsb_iso_recv_release_packets'
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c: In function 'node_of':
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:87: error: dereferencing pointer to incomplete type
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:87: warning: type defaults to 'int' in declaration of '__mptr'
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:87: warning: initialization from incompatible pointer type
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:87: error: invalid use of undefined type 'struct unit_directory'
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c: In function 'node_lock':
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:92: error: implicit declaration of function 'hpsb_node_lock'
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:92: error: 'EXTCODE_COMPARE_SWAP' undeclared (first use in this function)
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:92: error: (Each undeclared identifier is reported only once
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:92: error: for each function it appears in.)
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:93: error: 'quadlet_t' undeclared (first use in this function)
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:93: error: expected ')' before 'arg'
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c: In function 'node_read':
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:98: error: implicit declaration of function 'hpsb_node_read'
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c: In function 'node_write':
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:103: error: implicit declaration of function 'hpsb_node_write'
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c: In function 'start_iso':
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:114: error: implicit declaration of function 'hpsb_iso_recv_init'
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:114: error: dereferencing pointer to incomplete type
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:116: error: 'HPSB_ISO_DMA_DEFAULT' undeclared (first use in this function)
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:118: warning: assignment makes pointer from integer without a cast
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:125: error: implicit declaration of function 'hpsb_iso_recv_start'
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:128: error: implicit declaration of function 'hpsb_iso_shutdown'
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c: In function 'stop_iso':
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:139: error: implicit declaration of function 'hpsb_iso_stop'
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c: At top level:
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:154: warning: 'struct hpsb_host' declared inside parameter list
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c: In function 'fcp_request':
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:167: error: dereferencing pointer to incomplete type
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:168: error: dereferencing pointer to incomplete type
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c: In function 'node_probe':
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:182: error: dereferencing pointer to incomplete type
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:182: warning: type defaults to 'int' in declaration of '__mptr'
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:182: warning: initialization from incompatible pointer type
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:182: error: invalid use of undefined type 'struct unit_directory'
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:187: error: dereferencing pointer to incomplete type
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:187: error: 'quadlet_t' undeclared (first use in this function)
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:188: error: implicit declaration of function 'CSR1212_TEXTUAL_DESCRIPTOR_LEAF_DATA'
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:188: error: dereferencing pointer to incomplete type
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:188: warning: assignment makes pointer from integer without a cast
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c: At top level:
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:243: warning: 'struct unit_directory' declared inside parameter list
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c: In function 'node_update':
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:245: error: dereferencing pointer to incomplete type
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c: At top level:
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:253: error: variable 'fdtv_driver' has initializer but incomplete type
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:254: error: unknown field 'name' specified in initializer
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:254: warning: excess elements in struct initializer
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:254: warning: (near initialization for 'fdtv_driver')
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:255: error: unknown field 'update' specified in initializer
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:255: warning: excess elements in struct initializer
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:255: warning: (near initialization for 'fdtv_driver')
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:256: error: unknown field 'driver' specified in initializer
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:256: error: extra brace group at end of initializer
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:256: error: (near initialization for 'fdtv_driver')
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:259: warning: excess elements in struct initializer
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:259: warning: (near initialization for 'fdtv_driver')
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:262: error: variable 'fdtv_highlevel' has initializer but incomplete type
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:263: error: unknown field 'name' specified in initializer
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:263: warning: excess elements in struct initializer
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:263: warning: (near initialization for 'fdtv_highlevel')
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:264: error: unknown field 'fcp_request' specified in initializer
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:264: warning: excess elements in struct initializer
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:264: warning: (near initialization for 'fdtv_highlevel')
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c: In function 'fdtv_1394_init':
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:271: error: implicit declaration of function 'hpsb_register_highlevel'
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:272: error: invalid use of undefined type 'struct hpsb_protocol_driver'
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:273: error: implicit declaration of function 'hpsb_register_protocol'
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:276: error: implicit declaration of function 'hpsb_unregister_highlevel'
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c: In function 'fdtv_1394_exit':
    /home/jk/gspca-7876678e39df/v4l/firedtv-1394.c:283: error: implicit declaration of function 'hpsb_unregister_protocol'
    make[3]: *** [/home/jk/gspca-7876678e39df/v4l/firedtv-1394.o] Error 1
    make[2]: *** [_module_/home/jk/gspca-7876678e39df/v4l] Error 2
    make[2]: Leaving directory `/usr/src/linux-2.6.30-ARCH'
    make[1]: *** [default] Error 2
    make[1]: se sale del directorio `/home/jk/gspca-7876678e39df/v4l'
    make: *** [all] Error 2
    [jk@arch4linux gspca-7876678e39df]$

    Mr.Elendig wrote:1. you don't need to be root to run make
    I used root because the compiler gave me an error of permission denied.
    Mr.Elendig wrote:2. LANG=C make 3. /usr/src/linux-2.6.30-ARCH does not contain the whole source, grab it from kernel.org
    can you explain this a little more detailed?

  • Errors were found when compiling the workflow. The workflow files were saved but cannot be run.

    Greetings All,
    I am having issues with a SharePoint Designer workflow.  This is a SharePoint 2013 environment, I'm using SharePoint Designer 2013 and working on a SharePoint 2010 workflow.  I'm developing this as a SharePoint 2010 workflow because I need to do
    impersonation.
    The environment and workflow have been running, in the past week, without issue.  I went to add a couple steps and now I cannot publish the workflow.  While in SharePoint Designer, I receive the error:
    "Errors were found when compiling the workflow.  The workflow files were saved but cannot be run."  When I click the Advanced button on the error dialog, the message is "Unexpected error on server associating the workflow." 
    That is all the error information I have available; nothing is in the log files.
    I have investigated this error and tried the following:
    Cleared the SharePoint Designer cache.
    The WebApp.UserDefinedWorkflowMaximumComplexity was at 7000 so I increased it to 10000.  Restarted the servers (which may not have been necessary) and tried again receiving the same error.  I then increased it to 30000 with the same error result.
    Since this is a large workflow, I tried created a workflow with a single action, write to workflow log, with the same error results.
    I reboot the servers and try again and now I can publish the small test workflow but not the original.  However, neither will run.  When I attempt to manually run the small test workflow on an item, I get an error: "Sorry something went wrong.
    An unexpected error occurs.  I checked the log files for the correlation id and nothing, nothing was logged for the error. ~arg~
    Also, now no workflows can be published in this web app.  Not just the one I was working on but none of them!
    Does anyone have a clue what has happened to the SharePoint 2010 workflow service?  Or some suggestions for me to try?
    Thank you in advance for your help!
    Bob Mixon

    try these links:
    http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
    http://code2care.org/pages/sharepoint-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run/
    http://sharepoint.stackexchange.com/questions/119909/sharepoint-designer-error-errors-were-found-when-compiling-the-workflow
    http://stackoverflow.com/questions/26413125/errors-were-found-when-compiling-the-workflow-in-sharepoint-2013
    Hi Sagar,
    I appreciate it but if you see my original post, this is a SharePoint 2010 workflow that cannot be published; which has now caused all SharePoint 2010 workflows in the same web app to error.
    Your first link is specific to SharePoint 2013 workflows.
    Your second link refers to the UserDefinedWorkflowMaximumComplexity.  If you read my original post, I've already tried this and I've tried to publish a small (single activity) workflow.
    Your third link also refers to large workflows with many approval activities.  My workflow doesn't contain any approval activities.
    And you fourth link refers to 2013 workflows not 2010.
    My issue is with publishing and running a SharePoint 2010 workflow in SharePoint 2013.
    Thank you...

  • Pragma error when compiling with SDK X

    Hi,
    I am trying to compile my plugin application (which compiled fine with the previous sdk) using the SDK X, but receive errors in CAVAlert.h on the exception handler construct DURING, HANDLER, END_HANDLER.
    The errors are listed here:
    Headers/API/CAVAlert.h:156:3: error: 'suppress' was not declared in this scope
    Headers/API/CAVAlert.h:156:3: error: 'warning' was not declared in this scope
    Headers/API/CAVAlert.h:156:3: error: '__pragma' was not declared in this scope
    Headers/API/CAVAlert.h:156:3: error: expected ';' before 'jmp_buf'
    Headers/API/CAVAlert.h:156:3: error: 'ASException' was not declared in this scope
    Headers/API/CAVAlert.h:156:3: error: expected ')' before ':' token
    Headers/API/CAVAlert.h:156:3: error: expected ';' before 'struct'
    Headers/API/CAVAlert.h:162:3: error: request for member 'E_RETURNOutsideDURINGBlock' in 'gBadReturnCatcher', which is of non-class type 'int'
    Headers/API/CAVAlert.h:162:3: error: expected ')' before ':' token
    Headers/API/CAVAlert.h:162:3: error: expected ';' before 'int'
    Headers/API/CAVAlert.h:165:3: error: 'ENDHANDLEROutsideHANDLER' was not declared in this scope
    To compile against to SDK X all I did was:
    1) Used PIMain.c from the SDK X API directory.
    2) Changed ACRO_SDK_LEVEL=0x00090000 => ACRO_SDK_LEVEL=0x000A0000
    3) Changed the include directories to point to the new SDK X directories
    Is there another directive I must add to get the plugin to compile with SDK X?
    My preprocessor list is as follows:
    ACRO_SDK_LEVEL=0x000A0000
    HAVE_W32API_H
    PDMETADATA_HFT=1
    PLUGIN=1
    WIN32
    WIN_ENV
    WIN_PLATFORM
    WXUSINGDLL
    _CRT_SECURE_NO_DEPRECATE
    _DEBUG
    _WINDOWS
    __GNUWIN32__
    __WIN32__
    __WXMSW__
    Thank you,
    Magda

    Without seeing your code, I can't really help.
    If you want help with your code, open a formal support ticket.
    From: Adobe Forums <[email protected]<mailto:[email protected]>>
    Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
    Date: Tue, 6 Dec 2011 04:09:25 -0800
    To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
    Subject: Pragma error when compiling with SDK X
    Pragma error when compiling with SDK X
    created by magdakuit<http://forums.adobe.com/people/magdakuit> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4066378#4066378

  • Method not found in class errors when compiling project

    Hi,
    I am getting the following errors when compiling my project:
    Error(3,8): ReqLinesNotificationsVORowImpl not found
    Error(25,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(31,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(37,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(43,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(49,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(55,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(61,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(67,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(67,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(79,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(85,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(91,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(97,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(103,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(109,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(115,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(121,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(127,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(133,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(139,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(145,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(151,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(157,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(163,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(169,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(175,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(181,23): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(187,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Date) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(193,23): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(199,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Date) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImplError(205,23): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    I have ReqLinesNotificationsVORowImpl and ReqLinesNotificationsVOImpl files in myprojects directory. Can anyone help please?
    Thanks

    Hi,
    From the error it seems that the code is refering ReqLinesNotificationsVOExRowImpl file.
    Please make sure that its class file is present in myclasses folder.
    Since u have mentioned that ReqLinesNotificationsVORowImpl is already placed in myclasses folder. Hope this should resolve your issue.
    Regards,
    Raj Papdeja

  • Errors when compiling the web service (SAP Web Service Design Tool)

    After downloading and installing the SAP de Web Service Design Tool (for Crystal Reports Server) I created a connection, a simple query and was able to deploy a web services. I tested the web service with an Xcelsius dashboard within InfoView. Thereafter I created a second connection (other name but same ODBC connection / server) and created another simple query with two date(range) parameters and a group by year and month function in order to do a select count(). It executes fine, but when I try to publish the web service I get an error.
    There are errors when compiling the web service.
    Is does not say whatu2019s wrong or how I can solve this problem.
    Who can help me?
    Some notes:
    1) Within expert mode I used a MONTH() SQL function which does not show in the normal mode.
    2) It seams that the u2018administrationu2019 of Web Service Design Tool got u2018corruptedu2019 after only creating the two connections, queries and services mentioned above. I believe so because I could select one of two queries when I created the second service, but within the current connection I had only one query.
    Thanks for any help,
    Ron
    ADDITIONAL INFO: The parameters seam to be the problem. After removing the parameters I can publish the service. But without parameters it is NO SOLOTION.
    Edited by: RonKoudijs on Aug 26, 2010 6:28 PM

    Hello Taylan,
    I think the error that you received was due to packaging issues.I placed the
    UtilClass.java file under a directory called data which was present under
    the project directory.
    When you want to access a java class, you can either place the compiled
    class file in the WEB-INF/classes folder or you can place the java file
    under the project directory.
    I have attached the sample project that I created with your files.
    Let me know if you have any other questions.
    Thanks
    Raj Alagumalai
    WebLogic Workshop Support
    "taylan" <[email protected]> wrote in message
    news:3d6351b0$[email protected]..
    >
    I am trying to write a simpe web service in WebLogic Workshop, but havingan error
    which I could not understand. Could you please help me? Thanks in advance.
    Regards,
    Taylan
    My web service code is like belows:
    import weblogic.jws.control.JwsContext;
    import data.*;
    public class WebService1
    /** @jws:context */
    JwsContext context;
    * @jws:operation
    public UtilClass testType(UtilClass tTest){
    UtilClass returnObj=new UtilClass();
    if(tTest.getName()!= null){
    returnObj.setName(tTest.getName());
    return returnObj;
    and my UtilClass is placed in the data directory under the same directorywith
    my web service code. It is a simpe class as belows:
    package data;
    public class UtilClass
    private String name;
    public void setName(String name){
    this.name=name;
    public String getName(){
    return name;
    However I got an error when I try to compile the webservice class. Theerror is
    like belows:
    File Line Message
    WebService1.jws 0 Resource found on system classpath: data.UtilClass
    Build complete - 1 error(s), 0 warning(s)
    [ngroup.zip]

  • I have recently downloaded Bootcamp onto my MBP.  However, when i try to expand it from "downloads" it says "Unable to expand BootCamp5.0.5033 into downloads.  Error 2-no such file or directory.  I have tried changing the partition and Zipeg. didnt work

    I have recently downloaded Bootcamp onto my MBP.  However, when i try to expand it from "downloads" it says "Unable to expand BootCamp5.0.5033 into downloads.  Error 2-no such file or directory.  I have tried changing the partition and Zipeg. didnt work.

    You need to read and follow the Boot Camp instructions. Boot Camp Assistant is already on your computer in the utilities forderf. You run Boot Camp Assistant. Part of the process is to to then download the Windows Support software. This download is then installed from within Windows.
    There is no Boot Camp download that needs to be installed or unzipped from within OSx which you seem to be doing.

  • Error when compiling invalid object   XLA_00555_AAD_C_011117_PKG

    Hello folks,
    i am getting error when compiling the following object.
    XLA_00555_AAD_C_011117_PKG
    here i have mentioned below is what i have done for that invalid object.
    SQL> select owner,object_name,object_type
    2 from dba_objects
    3 where status='INVALID';
    OWNER
    OBJECT_NAME
    OBJECT_TYPE
    APPS
    XLA_00555_AAD_C_011117_PKG
    PACKAGE BODY
    SQL> connect apps/apps
    Connected.
    SQL> alter package XLA_00555_AAD_C_011117_PKG compile body;
    Warning: Package Body altered with compilation errors.
    SQL> show errors;
    Errors for PACKAGE BODY XLA_00555_AAD_C_011117_PKG:
    LINE/COL ERROR
    32209/1 PLS-00103: Encountered the symbol "NVL" when expecting one of the
    following:
    * & - + / at mod remainder rem then <an exponent (**)> and or
    || multiset
    The symbol "*" was substituted for "NVL" to continue.
    32209/23 PLS-00103: Encountered the symbol "=" when expecting one of the
    following:
    . ( * % & - + / at mod remainder rem then <an exponent (**)>
    and or ||
    The symbol "* was inserted before "=" to continue.
    LINE/COL ERROR
    Please Provide me solution as soon as possible
    Regards,
    Farook

    Not exactly a custom object.
    XLA%AAD%PKG packages will be built dynamically by the XLA's AAD compiler. This will be used while generating the accounting entries.
    This error may occur due to two reasons:
    a) missing source, which is used in the setup
    SELECT *
    FROM xla_conditions xc
    WHERE application_id = &appl_id
    AND xc.source_code IS NOT NULL
    AND NOT EXISTS (SELECT 1
    FROM xla_sources_b xsb
    WHERE xc.source_application_id = xsb.application_id
    AND xc.source_type_code = xsb.source_type_code
    AND xc.source_code = xsb.source_code);
    b) wrong conditions in setup
    SELECT application_id,amb_context_code,entity_code,event_class_code
    ,accounting_line_type_code,accounting_line_code
    ,segment_rule_detail_id,description_prio_id
    FROM xla_conditions xc
    WHERE application_id = &appl_id
    GROUP BY application_id,amb_context_code,entity_code,event_class_code
    ,accounting_line_type_code,accounting_line_code
    ,segment_rule_detail_id,description_prio_id
    HAVING COUNT(*) > 1
    AND SUM(NVL2(source_code,1,0)) <> SUM(NVL2(logical_operator_code,1,0)) + 1;
    For (a) check any patch available for the missing source. Otherwise contact Oracle Support.
    For (b) check the condition of the JLT / JED / ADR, whether anything is wrongly entered.
    By
    Vamsi

  • .class expected error when compiling

    Ive been getting this frustrating error when compiling. My program is essentially supposed to add the values in two matrixes and return a new matrix using the added values
    Heres my code:
       public Matrix add(Matrix comp)
            int[][] temp = new int[this.numRows()][this.numCols()];
            for (int a = 0; a < comp.numRows(); a++) {
                for (int b = 0; b < comp.numCols(); b++) {
                    temp[a] = this.myCells[a][b] + comp.getVal(a, b);
    Matrix addedMatrix = new Matrix(temp[][]);
    return addedMatrix;
    heres the constructor for Matrix object:
      public Matrix(int[][] mat)
            int[][] myCells = new int[mat.length][mat[0].length];
            for (int i = 0; i < mat.length; i++) {
                for (int j = 0; j < mat[0].length; j++) {
                    myCells[i][j] = mat[i][j];
        }getVal, numRows, and numCols are all helper methods that just return values.
    The error is '.class' expected in the line which says Matrix addedMatrix = new Matrix(temp[][]); I checked for extra brackets but there dont seem to be any.
    Any help would be appreciated. Thanks.

    I think you just needMatrix addedMatrix = new Matrix(temp);

  • HDL Interface Node (UsingFilterCore.vi) and "timing constraint" error when compiling

    I'm trying to use the HDL interface node in LV8 FPGA with a PCI-5640R and had the "timing constraint" error when compiling my VI, however, the same VI was successfully compiled on a CRIO-9104, it seems the FPGA on PCI-5640R is not good as the one on CRIO-9104, or I'm not using it right. could you please kindly help me out?
    I tested it with the sample code downloaded from NI website
    ( http://zone.ni.com/devzone/conceptd.nsf/webmain/456722DDDE17986A86256E7B0065EE6F ) which demonstrates using an IP core for a filter. To simplify it, I only keep the HDL Interface Node and the While Loop (see "UsingFilterCore.vi" in attached zip file), and then I created 2 projects including this VI (1 for CRIO-9104, in sub folder "CRIO-9104", the other for PCI-5640R, in sub folder "IFRIO 5640"). When opening the 2 projects separately in LV8.0 and selecting the VI for compile, the one for 9104 passed and the other failed. Here I attach the source code, error message screenshot and the NIReport from MAX, hope you can reduplicate the problem.
    Can you help me out？ Thanks very much !
    Message Edited by Jerry_L on 03-26-2006 09:28 PM
    Message Edited by Jerry_L on 03-26-2006 09:29 PM

    Hi Jerry,
    I'm just tried to make all these steps by myself (http://zone.ni.com/devzone/cda/tut/p/id/3516). I have generated FIR filter using Xilinx ISE and got *.VHD file which was going to use in HDL Node.
    In the Parameters tab of the HDL Interface Node configuration dialog, double-click in the Names column to add parameters. Create parameters as shown below.
    Next, switch to the Code tab. Notice that your parameters now appear in the entity section. To complete the next two sections of code, you will need to refer to the filt.vhd file that you generated earlier and interface the filter core to the LabVIEW FPGA execution system.
    1. The first problem I met was integrating VHDL code from earlier generated *.VHD file to CODE tab in properties of HDL Node. Content of entity section in *.VHD is not the same that in your attached file. Please check it in attached files. I'm sure this is the main reasen of problem.
    Next, switch to the External Files tab. Click the Add File button and select the filt.edn file that you created earlier. This is the EDIF netlist file that you generated earlier.
    2. I have no idea where can I get it and when during filter generation using Xilinx ISE it was generated too. How can I get it? I had to use your attached file filt.edn.
    3. After that I have made the same schematics like you have in your VI FPGA and try to run. But I've got two error messages:
    HDL Interfave node: enable chain not handled. Details: Refer to the documentation for the correct assignments for the enable_out output from your HDL code.
    HDL Interfave node: output not handled. Details: Right-click the node, select Configure to open the Configure HDL Interface Node dialog box, and use the Code tab to handle all output parameters. 
    Actually I need to model FIR filter:
    Bandwidth 200-600 Hz
    Sampling 8 KHz
    Attenuation 80 dB
    That's why I tried to follow all these steps by myself to understand how does it work.
    Thanks a lot.
    Nikita
    Attachments:
    Filter1.vi ‏16 KB

Maybe you are looking for