Error when configuring the userstore in OAM for OUD

Hi,
I installed the OIM/OAM sucessfully. I would like to do a PoC to protect one web based application using the OAM.
Using the OUD as user story. When trying to create a userstore in OAM, i am getting the below error. However, when i click on test connection, it shows sucessfully.
security.idm.ObjectNotFoundException: No User found matching the criteria.>
<May 6, 2013 4:51:23 PM IST> <Error> <oracle.oam.user.identity.provider> <OAMSSA -20023> <Authentication Failure for user : test2, for idstore OUDStore1 with exc
eption Could not get user : test2, idstore: OUDStore1, with exception: No User found matching the criteria. with primary error message null>
Can you please suggest me.
Thanks
Harry

Hi Brandon,
I'm wondering if your SAP Server realy is running on the 'localhost'? Don't you work on a seperate machine? Try the MDK-config with the server name of your SAP server, e.g.: ME SERVER NAME: sapserver or so (in case you're working on a different machine)
With that your browser should display the page.
Regards

Similar Messages

Error when configuring the MDK Plug-in Information

After configuring the MDK Plug-in in Eclipse, I press "Test Settings" and the Mobile Engine is not started. Three things happen:
1) I receive an error: "Cannot find the file '-classpath' (or one of its components). Make sure the path and filename are correct and that all required libraries are available"
2) I get a message "tools.jar found, Connection to ME successful, Invoking browser was successful"
3) A browser launches with the address http://localhost:4444/me with a "Page cannot be displayed"
I have been able to login to Mobile Engine, and I have had the Tomcat Server running.
At this point, the ME is not pointing to a SAP Server.
Settings were:
ME Installation folder: C:\Program Files\SAPMobileEngine
Java SDK tools.jar file C:\jdk13112\lib\tools.jar
ME Server Name: localhost
ME webapp root: me
ME webapp TCP port: 4444
Command Line to run browser: cmd /C start iexplore
ME Login: brgradst
ME Password: *****
In my environment variables I have
Variable Name: JAVA_HOME
Variable: C:\jdk13112
Variable Name: Path
Variable: %JAVA_HOME%\bin;%PATH%
Variable Name: TOMCAT_HOME
Variable: C:\KILL\tomcat\jakarta-tomcat-3.3.2
The URL of the instructions I was following was: http://localhost:4444/mdk/content/eclipse/eclipsemdkwizardsconfiguration.html
Thanks
Brandon Gradstein
[email protected]
+1 917 699 4699

Hi Brandon,
I'm wondering if your SAP Server realy is running on the 'localhost'? Don't you work on a seperate machine? Try the MDK-config with the server name of your SAP server, e.g.: ME SERVER NAME: sapserver or so (in case you're working on a different machine)
With that your browser should display the page.
Regards

Error when accessing the web-based portal for SQL Azure

Hi,
when trying to access SQL azure management portal, the following error is thrown:
[MoreThanOneMatch]
Arguments:
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See
http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.00&File=System.Core.dll&Key=MoreThanOneMatch -
Looking at the site in question, the problem seems to be Silverlight related. However, I am unable to debug as suggested since the server is located on Microsoft premises. To rule out a wrong password, I did a reset and ruled out typos by copying username
and password into the field. Furthermore since its not a production database, all IPv4 addresses (range 0.0.0.0-255.255.255.255) are allowed to access the database, so the problem should not be related to ip-based access restrictions. Is this a bug
in the web interface or is the problem sitting in front of the screen?
Regards,
Chris

Hello,
I also meet this issue when connect to SQL database without specify database on the login page. But the error disappear when I specify the database name in the database section, for example, master.It may be a bug in Management Portal of SQL Database.
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

Error when generating the selection screen "1000" for Report ztest

Hi Experts,
I am getting this strange error while trying to activate my report. I simply copy paste report from my other system to new system it was working fine there. I also created all include program etc.
While I am trying to create "Selection-text" it is giving message that "Program contain some serious syntax error" while checking syntax saying that "Program is syntactically right".
Any idea how to solve this???
Regards,
Gourav

Here is the code::::
SELECTION-SCREEN BEGIN OF BLOCK select WITH FRAME TITLE text-sl1.
Component
SELECT-OPTIONS:
       s_xcide            FOR gw_zsmmess_compo-xcide
                          NO INTERVALS
                          MATCHCODE OBJECT zsm_xcide_oi.
SELECTION-SCREEN END OF BLOCK select.
SELECTION-SCREEN BEGIN OF BLOCK prcopt WITH FRAME TITLE text-sl2.
Default severity code
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) text-dsc.
SELECTION-SCREEN POSITION 33.
PARAMETERS: p_dfsevc   LIKE gw_zsmglob_sever-sevco
                       OBLIGATORY
                       MATCHCODE OBJECT zsm_sevco
                       DEFAULT '3'.
SELECTION-SCREEN COMMENT 37(30) pt_sevtx.
SELECTION-SCREEN END OF LINE.
Minutes to wait before re-issuing alert
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) text-ria.
SELECTION-SCREEN POSITION 33.
PARAMETERS: p_aleexp(3) TYPE n
                        OBLIGATORY
                        DEFAULT '45'.
SELECTION-SCREEN COMMENT 37(10) text-min.
SELECTION-SCREEN END OF LINE.
Use component specific parameters Yes/No
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) text-cpu.
SELECTION-SCREEN POSITION 33.
PARAMETERS: p_usecsp   RADIOBUTTON GROUP rg1 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 35(10) text-rby    FOR FIELD p_usecsp.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 33.
PARAMETERS: p_dnucsp   RADIOBUTTON GROUP rg1.
SELECTION-SCREEN COMMENT 35(10) text-rbn    FOR FIELD p_dnucsp.
SELECTION-SCREEN END OF LINE.
Create/update component specific parameters automatically
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(32) text-cpc.
SELECTION-SCREEN POSITION 33.
PARAMETERS: p_updcsp   RADIOBUTTON GROUP rg2.
SELECTION-SCREEN COMMENT 35(10) text-rby    FOR FIELD p_updcsp.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 33.
PARAMETERS: p_dnccsp   RADIOBUTTON GROUP rg2 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 35(10) text-rbn    FOR FIELD p_dnccsp.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) text-afo.
SELECTION-SCREEN POSITION 33.
Fire one alert per component/error type combination
PARAMETERS: p_afrerr   RADIOBUTTON GROUP rg3 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 35(50) text-afe    FOR FIELD p_afrerr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 33.
Fire one alert per component (= outbound XI interface)
PARAMETERS: p_afrcom   RADIOBUTTON GROUP rg3.
SELECTION-SCREEN COMMENT 35(50) text-afc    FOR FIELD p_afrcom.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 33.
Fire one alert per run
PARAMETERS: p_afrrun   RADIOBUTTON GROUP rg3.
SELECTION-SCREEN COMMENT 35(50) text-afr    FOR FIELD p_afrrun.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) text-sel.
SELECTION-SCREEN POSITION 33.
Select messages since last run
PARAMETERS: p_lstrun   RADIOBUTTON GROUP rg4 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 35(40) text-slr    FOR FIELD p_lstrun.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 33.
Select messages in selected interval
PARAMETERS: p_mintvl   RADIOBUTTON GROUP rg4.
SELECTION-SCREEN COMMENT 35(40) text-sin    FOR FIELD p_mintvl.
SELECTION-SCREEN END OF LINE.
Message selection interval
SELECTION-SCREEN BEGIN OF BLOCK msgfilt WITH FRAME TITLE text-msf.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(10) text-icr.
SELECTION-SCREEN COMMENT 14(05) text-ifr.
SELECTION-SCREEN COMMENT 25(05) text-dat       FOR FIELD p_stadat.
Select messages - start date
PARAMETERS: p_stadat   TYPE d.
SELECTION-SCREEN COMMENT 46(05) text-tim       FOR FIELD p_statim.
Select messages - start time
PARAMETERS: p_statim   TYPE t.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 14(05) text-ito.
SELECTION-SCREEN COMMENT 25(05) text-dat       FOR FIELD p_enddat.
Select messages - end date
PARAMETERS: p_enddat   TYPE d                  DEFAULT sy-datum.
SELECTION-SCREEN COMMENT 46(05) text-tim       FOR FIELD p_endtim.
Select messages - end time
PARAMETERS: p_endtim   TYPE t                  DEFAULT sy-timlo.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK msgfilt.
SELECTION-SCREEN END OF BLOCK prcopt.
SELECTION-SCREEN BEGIN OF BLOCK testopt WITH FRAME TITLE text-tso.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(10) text-tst.
SELECTION-SCREEN POSITION 33.
List only, no updates
PARAMETERS: p_lstonl    RADIOBUTTON GROUP rg5 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 35(14) text-tsl       FOR FIELD p_lstonl.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 33.
Execute updates
PARAMETERS: p_update    RADIOBUTTON GROUP rg5.
SELECTION-SCREEN COMMENT 35(14) text-tsu       FOR FIELD p_update.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK testopt.
*eject
INITIALIZATION.

Error when Executing the Report - No Authorization for Multiprovider

Hello Experts,
After the upgrade has carried out in my Quality system, I'm unable to execute a query because of the authorization issue with Multiprovider. But earlier the same Authorization was assigned to the my ID.
The Role in Q and the Role in P is same. Right now P is with 3.1 and Q is with BI7.
In both the system I have the same Role. But in Q it says that: Error You have no Authorization for Multiprovider XXXX
This is happening for only one Multiprovider in Quality system. There is no change in the Multiprovider from earlier structure to the present structure.
Can anyone give me any idea as to how to solve this issue?
Many thanks in Advance..
Thanks
Raman.. This is Emergency for me..

Ok,
Pick up a test user (or your user) and go to transaction su01.
Check the roles that are assigned.
Double-click in each one and choose display. Go to tab authorizations and click on the glasses icon of displaying authorizations data. Then go to menu->Utilities->Technical names On.
You should see the tree with the node name Business Information Warehouse (technical name RS), if you don't see this in this role, than the issue it's not in this role, go back to su01 and check another role the same process until you find this node.
If you expand this node you'll see another nodes, one of them is called Data Warehousing Workbench - InfoCube (technical name S_RS_ICUBE). And you probably can't find another node called Data Warehousing Workbench - MultiProvider (technical name S_RS_MPRO), this is the new node you want.
In the node S_RS_ICUBE expand it and you'll see the authorizations given to InfoCubes with activity, InfoArea and InfoCube. In the older system BW 3.x this object was used to give access to InfoCubes, but also to MultiCubes. So you have to find the role that has this object with InfoCube with the value of MultiCube or with all values, for example, you could have this node in your role with the following values:
Activity                       03
InfoCube Subobject     DATA
InfoArea                     ZFI*
InfoCube                    ZFIAA_C11, ZFIAA_C13, ZFIAA_M02
or with:
Activity                       03
InfoCube Subobject     DATA
InfoArea                     ZFI*
InfoCube                    *
or with:
Activity                       03
InfoCube Subobject     DATA
InfoArea                     ZFI*
InfoCube                    ZFI*
Something like that. The first example give access to specific InfoCubes and one MultiCube, the second one you'll have all the InfoCubes and MultiCubes inside the InfoArea started with name ZFI and the third one you'll have all InfoCubes and all MultiCubes started with name ZFI that belongs to the InfoArea started with name ZFI also.
Got the picture?
So in BI 7 MultiCubes are now controlled by the new object S_RS_MPRO instead of the older object S_RS_ICUBE. What you should do is go to transaction pfcg and insert the role you want to include (or change these new values, i.e., the role that has the access to the MultiCube values inside the object S_RS_ICUBE which the query is built on) the new object S_RS_MPRO and click on change. Go to tab authorizations and click on change authorization data. Then click on manually (ctrlshiftF9) and insert the object S_RS_MPRO. Inside this new object you should insert the authorization data for accessing your multiproviders.
In the 3 examples above you should create these 3 entries:
Activity                          03
InfoArea                         ZFI*
MultiProvider                  ZFIAA_M02
MultiProvider Subobject DATA
or with:
Activity                          03
InfoArea                        ZFI*
MultiProvider                  *
MultiProvider Subobject DATA
or with:
Activity                         03
InfoArea                        ZFI*
MultiProvider                 ZFI*
MultiProvider Subobject DATA
Therefore you continue to have the object S_RS_ICUBE to control only the InfoProviders plus the new object S_RS_MPRO to control the MultiProviders.
Now generate the profile(s), save the role(s) and test it again!
Diogo.

Getting the below error when running the Baseline.grf for the first time

I am getting the below error when running the Baseline.grf for the first time.
Appreciate your support in resolving it.
Error below:
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Baseline.grf
INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
INFO [main] - Checking graph configuration...
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (Baseline)
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [WatchDog] - Successfully started all nodes in phase!
INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
INFO [RUN_GRAPH1_0] - Checking graph configuration...
INFO [RUN_GRAPH1_0] - Graph configuration is valid.
INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
java.lang.NullPointerException
     at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
     at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
     at org.jetel.graph.Phase.free(Phase.java:487)
     at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
     at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
     at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
     at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
     at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
     at org.jetel.component.RunGraph.execute(RunGraph.java:302)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
ERROR [WatchDog] - Node RUN_GRAPH1 error details:
org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
     at org.jetel.component.RunGraph.execute(RunGraph.java:324)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 2 20132
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !

It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
#echo $CLOVER_LIB/*
for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
     LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
done;
#for i in `ls $CLOVER_LIB/*.jar`; do
#echo $i
#done;
You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
HTH,
Dan
http://branchbird.com

Error when determining the CTIADM_PROF profile for agent xyz

Hi,
I have created the new cic frame work and assigned it to the position. when i run the TC - cic0, I am getting the following
"Error when determining the CTIADM_PROF profile for agent xyz"
Can you help me out ?
Thanks in advance

Hi Devi,
Problem is your IC winclient profile definition don't have any profile definition for CTIAMD_PROF assigned to it.
For this you can use standard profiles or may create your own CTI Component profile.
Follow IMG path:
Customer Relationship Managemet>Interaction Center WinClient>Component Configuration>Hidden Components>Configuration of CTI Component-->Define CTI Component Profile
Use this profile defintion to assign it to CTIAMD_PROF in you IC winclient profile definition.
Best Regards,
Pratik Patel
Reward with POints!

Setup synchronize with address for Sage ACT! showed Runtime Error: Cannot configure the section.

Hello Blackberry Senbai...
As my problem showed as subject line. "When I setup synchronize with address book for Sage ACT! showed Runtime Error: Cannot configure the section."
Setup was stopped from this point.
my system info..
Desktop Manager version is 5.0 downloaded from Blackberry website.
ACT version is 2010.
OS: Window XP Pro with service pack 3
Thank you for your time to review my problem.

Hi and Welcome to the Forums!
Since the version of ACT that you state is not contained in the PIM compatibility matrix, I'm not sure that there is anything to be offerred...
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

"Error when interpreting the runtime repository" for IUICOBJD component

Hello experts,
I create an enhancement set for IUICOBJD component, and the systems return my the error:
"Error when interpreting the runtime repository"
Then in ICWEB, this enhancement affect to the view connectionObject. And this view doesn't appear.
Someone had some problems to create an enhancement set for IUICOBJD component ??
Is necesary to make somenthing with IUICOBJ component before to create the enhancement for IUICOBJD.
Could you tell me the steps to solve this??
Thanks in advance.
Best regards.

Hello Ismail, thanks for you help, I have tried to make this and the repository is the same code.
Do you know if is necesary to make something special to create an enhancement for IUICOBJD component ?? make something first with IUICOBJ and then with IUICOBJD???
I haven't any problems with other components for example with IUICMD the enhancement run ok.
Thanks in advance.
Best regards.

Error when reading the access data for the Adapter Engine

We are getting the following error in XI. It started on Jan 22 and resolved on Jan 23 automatically. Nothing has been changed and we don't able to understand how problem started and how it resolved:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.xpd.dbcixpd</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>3: Unable to find URL for Adapter Engine af.xpd.dbcixpd</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.xpd.dbcixpd</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Pls suggest if anyone has gone thru same problem.
Regards
Amar

I got the same problem while using RFC lookup.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.tx1.netweaver</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>3: Unable to find URL for Adapter Engine af.tx1.netweaver</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.tx1.netweaver</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any idea ,when we get this error usually.

Error occurred in deployment step 'Install app for SharePoint': There were errors when validating the App manifest.

Hi everyone,
I `m getting error message like this "Error occurred in deployment step 'Install app for SharePoint': There were errors when validating the App manifest.". when i try to debug the application with "Start Action"="Internet Explorer".This
application is an apps for office application with Oauth with Office 365
Any help in this regard is greatly appreciated
Thanks!!
Santosh Sutar

Thanks Fei for your time.
>>>I would suggest that you create a new project and set it start action with 'Internet Explorer'
to see whether this issue could be reproduced. If no, we can compare the difference between the two menifest files.
As per your suggestion above ,With new project,I can debug with with start action "Internet Explorer" and I
could not see much difference between the manifest files.
Please find below my manifest file for the reference .
<?xml version="1.0" encoding="UTF-8"?>

<OfficeApp xmlns="http://schemas.microsoft.com/office/appforoffice/1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="TaskPaneApp">
<Id>084cd6cd-2908-44d1-a5cf-4fa029aec211</Id>
<Version>1.0.0.0</Version>
<ProviderName>[Provider name]</ProviderName>
<DefaultLocale>en-US</DefaultLocale>
<DisplayName DefaultValue="Office 365 MVC" />
<Description DefaultValue="Office 365 MVC"/>
<AppDomains>
<AppDomain>https://login.microsoftonline.com</AppDomain>
</AppDomains>
<Hosts>
<Host Name="Document" />
<Host Name="Workbook" />
</Hosts>
<DefaultSettings>
<SourceLocation DefaultValue="~remoteAppUrl/Home/Index/" />
</DefaultSettings>
<Permissions>ReadWriteDocument</Permissions>
</OfficeApp>
Please suggest on this.
Thanks !!
Santosh Sutar

'Install App for SharePoint' There were errors when validating the App Package

Hello,
When testing with an app, I tried to add an
app event receiver before learning that remote event receiver are not allowed with
Sharepoint-hosted app. So I reseted the Handle app installed and
Web Project properties of my project and tried to redeploy and this error occurred :
'Install App for SharePoint' There were errors when validating the App Package
Something other than the project's properties have been modified but I don't know what.

I think the best way to figure real reason out is to look at ULS logs.
This is example, what I had:
Unexpected App Packaging: CreatePackage: Unexpected exception: There were errors when validating the App package: There were errors when validating the App Package. Other warnings / errors associated with this
exception: The current version of SharePoint is less than the SharePointMinVersion specified in the app manifest. CurrentVersion='15.0.4693.1000', SharePointMinVersion='16.0.0.0'.

I would appreciate your help on how to configure a gmail in a way it ask for the password everytime I connect?. In the only way I can configure it I have to include the pw when configuring the account and after that it do not ask for pw

I would appreciate your help on how to configure a gmail in a way it ask for the password everytime I connect?. In the only way I can configure it I have to include the pw when configuring the account and after that it do not ask for pw so everyone that shares my iPad can oppen my mail with no pw required.
Thank

The iPad is designed to be a single user device, and there is currently no way to password protect the Mail app - even removing the account password from Settings > Mail, Contacts, Calendars will just prevent new mail being downloaded, it won't hide those that have already been downloaded. There is this work-around for the app : https://discussions.apple.com/message/13127632#13127632 . Also there might be third-party email apps that feature password protecting.

Error when reading the DDIC-data for table

Hi Tobias
We upgraded from DMIS 2011 SP04 to SP07. We are in development system.
To test initial load, we stopped replication for an existing table and then started replication for the same table.
Mass transfer id connects ECC system to BW on HANA system.
Replication errored with the following message:
Error when reading the ddic-data for table MARD (RFC destination DWACLNT010).
Looking for your guidance.
Kind Regards
Kamaljit Vilkhoo

Was able to solve using oss note 1972533.

I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, re

I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, reinstalled still have same issue.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Error when configuring the userstore in OAM for OUD

Similar Messages

Maybe you are looking for