Error when executing Planning function in BEx Web

Hi everyone,
When executing a planning function in BEx Web, via Web Application Designer, I am getting the following error message.
ABEND BRAIN (178): Common entries are not permitted for plan queries and input queries
MSGV1: Aggregation level name
Where do I go wrong?
Thanks in advance, hope this is enough info.

Hi Geerts,
If i understood well, you have some problem with your query. Please check the query that you have on WAD and wich characteristics did you have on your level (the level on wich the query is based).
Pls, check the correct execution on that query on Query Designer too. That query is a plan query? it`s ready for input ?
Hope this help
Natalia.

Similar Messages

Error when executing planning application in Web

Hi everyone,
When executing a planning function in BEx Web, via Web Application Designer, I am getting the following error message.
ABEND BRAIN (178): Common entries are not permitted for plan queries and input queries
MSGV1: Aggregation level name
Where do I go wrong?
Thanks in advance, hope this is enough info.

Have you considered creating a characteristic relationship with an EXIT Class. In this way you are able to make the value whatever you want according to the rules you code.

Error while executing planning Function

Hi All,
I'm getting some error while executing planning function. Below are errors. Please check and provide solution.
Errors occurred when executing planning function RTFMPF01/RTFMPG01
Value 08 of chara Region does not correspond to the attrib.val MI of chara Store
Value 10 of chara Region does not correspond to the attrib.val RM of chara Store
Value 11 of chara Region does not correspond to the attrib.val NA of chara Store
Thanks,
Vamsi

Hi,
Value 08 of chara Region does not correspond to the attrib.val MI of chara Store
Looks like there is a characteristics relationship which derives the attribute store from Region.
Check the master data for Region for attribute Store and the corresponding values.
The values that are maintained in the master data will only be allowed to enter in the cube.
Thanks
pratyush

Authorization issue in WAD when executing planning function

Hi All,
I am facing the bellow authorization issue-
Termination message sent
WARNING BRAIN (800): You do not have the authorization for component !!AZF2PO_AGR
MSGV1: ZF2PO_AGR
MSGV2: REP
MSGV3: !!AZF2PO_AGR
MSGV4: 16
ABEND RSBOLAP (002): No Authorization
I am getting this issue When Calling Planning function from WAD application using button. This authorization fail is happening in portal when the Planning function is executed.
Error explains that there is no authorization for component u201C!!AZF2PO_AGRu201D.Where as in actual we donu2019t have any component as stated.
Instead we have an aggregation level with technical name ZF2PO_AGR.
We have already Assigned the below Planning objects-
S_RS_ALVL
S_RS_PLENQ
S_RS_PLSE
S_RS_PLSQ
S_RS_PLST
To Summarize-There is a web application with button linked to planning functuion.When clicked on this button after execution of web template we get the above error.
Have found note 1000006,but it says Support package 12 and all but we in support package 20

Hi Guys,
I know this thread is answered but I have a similar problem I think.
I have a WAD that is published to the portal. I have added the WAD to a page via a hyperlink, the page resides in KM. When a user opens the page, via a URL iView, the see the page, but when they click on the link to open the WAD, I get the following error:
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 07:19_26/02/10_0067_18934750
Refer to the log file for details about this exception.
When I assign the Super Admin (UME Role) to the user, they can execute the WAD no problem.
I am not an Authorizations person, so any pointers as to where I should start looking would be greatly appreciated.
Thanks.
Freddie.

Macro Error while executing planning functions or saving data

Dear All,
I am getting following error in BEx Analyzer while executing planning function or pressing a save button.
Note: Excel is 2007 version.
Cannot run the macro "XXXXXX.xlsx". The macro may not be available in this workbook or all macros may be disabled.
I changed the settings in Macro Settings (Office Button -> Excel Options -> Trust Center -> Trust Center Settings-> Macro Settings) eventhough it is showing that above message.
selected ->
Enalble all macros
Trust access to VBA project object model.
If anybody faced this issue kindly reply to this.
Best Regards,
SG

Hello everybody,
i am facing exactlythe same issue! I am currently running GUI Patch Level 14 and BI Add on Patch Level 10.
I have also adjusted all necessary settings in Excel Options like Activate all Macros and Trust VBA Coding.
Does anybody have another Solution.
As mentioned before Gui Patch 13 and BI Add On Patch 10 obviously arent the solutiuon.
Best regards
Janos

Error when executing a report in Bex analyzer"

Hi all ,
when I am executing a report in Bex analyzer and selecting a hierrachy and execute the report it is giving an error " in Program CL_RSR_RRKO_HIERARCHY and Form SEL_TO_SELDR_EQSID.Any reason for this.
thanks
Rao

Hi,
go to RSSM and give your infoprovider name and check the authrization objects which are present in the infoprovider ...it will have option ticked.
Basically authorizations are based on company code or sales org.
give that authorization object in the first option in RSSM and check on which infoobject it is based.
Also you can give your user id in one of the option in this transaction RSSM and then you can check for that authorization object do you have any values present for the included infoobjects or not.
You will not have those values entry here in the authorization object for those selections which you are giving during the report run.
Just change the vales here and give the desired value for which you are running the report.
Save it.
Hope it helps
Thanks
Message was edited by:
Ajeet

Error while executing planning function with reference data

Hi,
I have a two planning functions one is used to upload the file (with out reference data checkbox in planning function RSPLF1) and other planning function ('Referece data'check box is selected in custom planning function RSPLF1) to execute the logic of creating new record along with the flat file data.
Following data is uplooaded
Company code | Profit_ctr | calmonth | Amount
1000                 | 50000      | 01.2011 | 150
Cube data
Field1    | Company code | Profit_ctr | calmonth | Amount
         | 1000                 | 50000      | 01.2011 | 150
Z1         | 1000                 | 50000      | 01.2011 | 150
Now I want to change the value from 150 to 200 and when I try to execute with the following data, it is giving dump 'a row with the same key already exists'.
Company code | Profit_ctr | calmonth | Amount
1000             | 50000          | 01.2011 | 200
Ideally in the second execution it should append the new row with Amount value 50 to cube which is the delta value.
I debugged the issue and found that I_TH_REF_DATA has following data and C_TH_DATA also contains the same records.
Field1     Company code | Profit_ctr | calmonth | Amount
#     1000                 | 50000      | 01.2011 | 150
Z1     1000                 | 50000      | 01.2011 | -150
Z1     1000                 | 50000      | 01.2011 | 150
Due to this, record which already exists in C_TH_DATA and trying to append new record with the same combination is failing.
C_TH_DATA should only contain the source data of Amount 200, but not sure why reference data is coming in C_TH_DATA.
Could anyone please guide me on how the reference data is getting populated in C_TH_DATA ?
Thanks in advance
Edited by: peppy on Aug 3, 2011 5:00 PM
Edited by: peppy on Aug 3, 2011 8:37 PM

Hi Peppy,
C_TH_DATA is hashed table! According to your post you are trying to append to C_TH_DATA and this results in a dump. Please take a look at the standard planning function to see how SAP is programming the planning functions. E.g. in CL_RSPLFC_REPOST method IF_RSPLFA_SRVTYPE_IMP_EXEC~EXECUTE you can find the following code:
CREATE DATA l_r_data_wa LIKE LINE OF c_th_data.
ASSIGN l_r_data_wa->* TO <s_data_wa>.
CREATE DATA l_r_new_wa LIKE LINE OF c_th_data.
ASSIGN l_r_new_wa->* TO <s_new_wa>.
LOOP AT c_th_data INTO <s_data_wa>.
<s_new_wa> = <s_data_wa>.
now the SAP code changes the values, you can do it your way here
and than write the changes back
        MODIFY TABLE c_th_data FROM <s_data_wa>.
ENDLOOP:
Another option is to use the READ statement to check if the record is already in the table. If not, you can use MODIFY otherwise you use INSERT. So you get something like this:
READ C_TH_DATA from <s_data_wa> transporting no fields.
if not sy-subrc EQ 0.
INSERT <s_data_wa> into table C_TH_DATA.
else.
MODIFY TABLE c_th_data FROM <s_data_wa>.
endif.
Depending on your requirements you can also use the collect statement.
If c_th_data shows the reference data as well, you may need to adjust the filter to restrict it to the correct values.
Hope this helps.
Best regards
Matthias Nutt
SAP Consulting Switzerland

Error when execute a query BW in WEBI

Hi Gurus,
I need your help:
Status:
SAP_ABA     700
SAP_BASIS 700
PI_BASIS         2005_1_700
SAP_BW         700
BI_CONT         703
SAP GUI 7.10 SP 7
I run a 3.5 query with bex and all its ok.
But when i want run the same query in BOE Web Intelligence Rich Client I have an error
In WEBI: error : WIS 10901 for MDX QUERY
in BW TR: SM21 : Communication error, CPIC return code 020, SAP return code 456.
thxxhead   7415 020456     ThRecei    CPIC-Er
If I just put one masterdata, the query return the list of this MD.
But when i put 2 MD or one indicators, i have error.
Thanks for help.

Hi Ingo,
In response to your questions:
- "you did install the SAP Integration Kit?": yes, we did a "server" install. The other options are Desktop and Custom
- "its not an evaluation key that has expired ?": No, this is not the case
- "did you check the MDX Parser destination in transaction SM59 ?": Yes, this is working now (SM59 - connection test succesful).
- "Try a simple BI Query and build a new Web Intelligence report on top (java, dhtml)" We did this, results:
WebI Rich Client. This worked fine. Report made, refreshes, can add objects, ...
Web Advanced (JAVA Report panel): we get error - "An error occurred while trying to load the provider for transport sap. Failed to load library mda_sap. System error message: .(WIS 10901)"
We checked if we didn't miss anything with the server installation of the SAP integration kit, this was not the case. When we chose a "repair install", all options where already installed. What we did do, is install the Fix pack2. Reason: there was a reference to mda_sap.dll in the BusinessObjects Enterprise XI 3.0 FixPack 2 notes. Note: refer to new thread: Cluster Definition transport error - BO XI 3.0 FixPack 2 (Server&Client)
- We also tried a more advanced query, with prompted filters and calculations.
WebI Rich Client. same error as before, "The MDX-query <MDX syntax> See RFC trace file or SAP system log for more details. (WIS 10901)"
Web Advanced (JAVA Report panel): same error as before - "An error occurred while trying to load the provider for transport sap. Failed to load library mda_sap. System error message: .(WIS 10901)"
Seems we have the same problem as Claudia + an mda_sap issue. We are running out of options here. Any thoughts on this?
Thanks for your help!
Raf

Webi report throwing error when executed

HI Experts,
While executing a Webi Report we are gettign following error when executing with more than one characteristics -
A Database error occured. The database eror text is : The MDX Query select { [Measures].[4225B1TBMEMOYKZGDKLVINMAW] } ON COLUMNS FROM [ZMEPSC01/ZMEPSC01_QRY_0001]
failed to execute with the error Unknown error.(WIS 10901).
We tried changing the Universe -> Parameter -> Control -> Limit size of result set to -> unchecked it.
But still the error remains. Can u put some light over it.
Thanks.

Hello ,
Just Check with the BI the people they might change the the column name or some thing else in the bex Query that s way It is showing error.
Refresh the universe and generate the report then check it.
Thanks
Santhosh V

Unknown error when executing MDX when refreshing Crystal Report with BEx

Hello Experts,
I have created a Crystal Report (Crystal 2008 SP1) with BEx Query (7.10) and have been able to refresh successfully when the SAP_ALL authorization is included in my user role. I don't want my end users to have SAP_ALL so I created a role and assigned the authorizations recommended in the SAP Integration Kit for BusinessObjects 3.1 Install Guide.
When I run the report as one of the users assigned to my new role I get the following error in the trace file.
ERROR: .\crdb_bwmdx_execution.cpp [200]: l_bapiGetStreamInfo failed with return code RFC_RC = 0 Exception: BAPI Error: BAPI Error #:0
Unknown error when executing MDX
2188     6556     Caught DbError #1 with Message 'BAPI Error #:0
Unknown error when executing MDX'
2188     6556     Caught DbError #1 with Message 'BAPI Error #:0
Unknown error when executing MDX'
2188     6556     Caught DbError #1 with Message 'BAPI Error #:0
Unknown error when executing MDX'
I tried all the Fix Packs (ie 1.1., 1.2 and 1.3) for XI 3.1 Integration Kit to try resolving the error but it didn't work.
The same query works fine in BEx Web when running as one of the users in the new role I created for Crystal Report users.
Are there any other Authorizations that I need to include in the role?
Cheers.
Paul.

We have been able to identify what causes the MDX driver to error and I will explain what we are trying to implement with the hierarchies.
Firstly, we are creating reports of the HR cube Mutliprovider using the SAP MDX Driver which works well when there are no authorization analysis set on the cube. But with the authorization analysis set for on 0ORGUNIT for BEx Explorer Crystal returns the MDX error.
Each of the Business Unit managers are assigned to an Organization Unit that will be used to restrict the employees that will be reported. To restrict the Managers to only see their Org Unit we have set the 0ORGUNIT object to use authorization ananlysis and a custom authorization variable to return only data for the Org Unit they belong too.
In Crystal this works well when a manager has an Org Unit that is a head department of other Org Units. This scenario will give Crystal the NodeID and Parent NodeID to create the hierarchies in the report. But when a manager does not have any other Org Units beneath there own department then Crystal doesn't have a Parent NodeID to create the Hierarchies with the NodeID. In the RFC trace I can see an error when Crystal is trying to get the Parent NodeID but the user is not authorized to that Org Unit then it throws the error.
We have got a temporary workaround which is to create the managers a dummy Org Unit below their own department. The workaround will do for now but shouldn't the MDX driver be able to recognise that it has returned the last level in the Org Unit Hierarchy and not return an error?
The customer is looking for a product fix as they believe this should be handled by the driver. Is this a bug or a limitation of the product?
Paul.

Error when executing function in MSS launchpad report ???

In MSS lanchpad report, we have the following problem:
Error in Manager Sef-Service
When calling the report, the following error occurred:
System: HRP
Error when executing function
Basically in MSS report, I select employees in the first iView which calls another ABAP query in back-end to display back-end t-code inside iView of portal through ITS service. What could be the reason for it? please advice.
Thanks,
Anthony

Please try converting the standadrd-delivered scenario RPT0, then check
out the things.
Also problem may be that your function code names contain
the character '&'. This causes a problem when the selected function
code is passed to the ITS-WebGUI as a URL parameter. Please use only
standard characters (A..Z and _) when you define a function code.
Then it should work.
Please go through the following link also
http://help.sap.com/saphelp_erp2005vp/helpdata/en/3a/
3198408d953154e10000000a1550b0/frameset.htm
Please test in backend using Se38 > PWPC_RPT_START_REPORT_TEST
The Reporting Iview in the portal has the Report category type, by
the report category type is set to "RPT0". Therefore, when the
application is launched, the reporting category type is also sent as URL
parameter to the backend system. As of ECC 6.0 only the reporting
category type "RPT0" is supported. ensure this is set for your custom reports if you are using own scenarion
then set in the Iview property of reports as well
ie example
1)Change the Iview property "Scenario" of the Reporting iview from
"RPT0" to your own "ZRPT", than this set of reports will work. however,
the standard reports will not work.
pwpc_convert_mdt_to_lpa >>
The following list of reports have been converted.

Barcode error when executing it in Web Server, using BAR_CODE_39

Hello. following error is evidenced when executing the Barcode sample in web-server :
REP-108: File '/tmp/srw088834566' not found
The variable CLASSPATH y DISPLAY were changed.
I miss it the fact is that it works when I use BAR_CODE_128.
With 39 he encounters error REP-108.
Your suggestions
Karina Gaona V.

you mwy check this to trouble shoot front end
Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation

Integrated Planning: Planning Functions in the Web - Issues with Binding

Hi
We are on SPS 11 and are having some difficulties getting our Planning Functions to execute corerctly in the web templates.
I have created a simple planning function that performs a distribution.
The Planning Function works as expected using the plannning wizard and ristricts the data based on the Filter that I have created on the Aggregation Level as well as the Planning Function Selections.
I have created a query and web template that contains the same restriction as the filter in my aggregation level. The Agg Level filter / planning function and Query Filter all contain the Hierarchy Node Variable ZN_CC1 for the standard Cost Center Hierarchy.
I have created the following 4 Planning Buttons to test the execution of the Planning Function in the Web:
1. Planning Function Simple. Binding ref to the DP_1 (Query), Variable = Hierarchy Variable ZN_CC1, Planning Function ZDistrib1.
2. Planning Function Simple. Binding ref to the DP_1 (Query), Variable = Variable Input String Default ZN_CC1, Planning Function ZDistrib1.
3. Planning Function Simple. Binding ref to the DP_1 (Query), Variable = Hierarchy Variable ZN_CC1, Planning Function ZDistrib1. Display variable property selected.
4. Planning Function Simple. Binding ref to the DP_1 (Query), Cost Center Characteristic Data Provider Selection Default, Planning Function ZDistrib1.
When the query is executed and a node representing a group in the hierarchy is selected the query is executed and is input ready for the selected group. This is a subset of the hierarchy.
When the above planning fucntions are executed the following results display.
1. The planning function is executed however it is not restricted to the selection based on the hierarhcy variable node selected by the user. The planning function is executed for the entrire hierarchy. It is not restricted by the cost center hierarchy node variable value.
2. The planning function is executed however it is not restricted to the selection based on the hierarhcy variable node selected by the user. The planning function is executed for the entrire hierarchy. It is not restricted by the cost center hierarchy node variable value.
3. The variable popup displays and a hierarchy node is selected. The planning function is executed however it is not restricted to the selection based on the hierarhcy variable node selected by the user. The planning function is executed for the entrire hierarchy. It is not restricted by the cost center hierarchy node variable value, that was entered when prompted.
4. The planning function is executed however it is not restricted to the cost center selection based on the query DP1. The planning function is not restricted by the cost center selections.
HOWEVER,
If I goto to the filter web item and edit the cost center filter by selecting and adding all available cost centers to the filter. (This list of cost centers is restricted to the cost centers subordinate to the hierarhcy node selected in the variable)
When the above the planning functions are executed the function is now restricted to the cost centers added to the filter as explained above.
If anyone has had a similar issue with Planning Functions executing for data outside of the Dataprovider Selections I would be interested to know how you managed to get the planning function to retrict to the DP Selections that include hierarchy node variables.
If anyone from SAP can comment before I raise this as an OSS issue it would be much appreciated.
Thanks in advance.
Ian

Hi
Just wondering if this is the correct forum to post BI IP questions?
Any comments if this the right forum.
Thanks
Ian

Error when executing a .irpt page

Hi,
I am getting the below error when executing a .irpt from the workbench. I am on MII 12.2.2 Build (235).
404 Not Found
SAP NetWeaver Application Server 7.20 / AS Java 7.30
Error: S:usrsapALXJ10j2eeclusterappssap.comxappsxmiiearservlet_jspXMII
oot/XMII/CM/<Project>/<File.irpt>
Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jstsg/home
Details: No details available.
Please share your thoughts on this.
Regards,
Chanti.

Hi Chanti,
This sounds obvious, but check to make sure your irpt page has the extension .irpt in the workbench. Depending on how you saved it, it might have been dropped.
Also make sure the page is published by either saving it to web:// (not db://) or by right clicking and selecting Publish.
Regards,
Mike

Runtime error when executing ME2B/ME3B if condition recs 160

Dear all,
I have created a vendor rebate agreement and entered condition records for a vendor/material combination.
Since for this vendor there are 170 materials for which he provides rebate I have created 170 condition records.
When I am trying to change or display the rebate agreement by executing transaction codes ME2B and ME3B respectively the following run time error occurs (Runtime error when executing transaction codes ME2B/ME3B for condition recrds >160):
Runtime Errors: DBIF_RSQL_INVALID_RSQL
Except. CX_SY_OPEN_SQL_DB
The error is in function module SELECT_TEXT at line 120 "select * from stxh client specified into table stxh_buffer".
When I debug or test/execute the function module SELECT_TEXT, I find that there are no relevant entries in table STXH for the vendor rebate agreements.
Please note that if the condition records of the rebate agreement are 160 and less then there is no problem.
I would appreciate if I could have your expert oppinion on what is causing this runtime error and if it is possible on how to resolve it.
Thanks in advance.
Regards,
Mimis
Edited by: Mimis1973 on Jan 26, 2011 11:18 AM
Edited by: Mimis1973 on Jan 26, 2011 11:20 AM
Edited by: Mimis1973 on Jan 26, 2011 11:23 AM

There's something similar in OSS note 1002788. Is it relevant to your system?

Error when executing Planning function in BEx Web

Similar Messages

Maybe you are looking for