Error when executing Query with user date settings = mm/dd/yyyy
Hi all,
I created a remote cube with datasource = TCURR table with proper conversion of the date etc.
The query on top of this remote cube works fine if my user date settings is set to dd.mm.yyyy
But when a user in USA, with user date settings = mm/dd/yyyy, executes the same query, they get a message
SYST: Date 31/05/2006 not expected.
Message no. FGV004
The input variable on the Query is on 0CALMONTH.
This message appears immaterial of what calmonth input I give.
has anyone encountered this error? if yes, what could be the solution please?
thanks
Emmanuel
Hi,
This is in regard to the user settings maintained in transaction /nsu3.Please follow the below link.
http://web.mit.edu/sapr3/docs/webdocs/getstarted/gsSETTINGS.html
You need to change the settings as required.
Hope this helps.
Thank you,
Prem
Similar Messages
-
Error when executing report with large data selection in Infoview
Hello,
This is regarding Error we are facing in BO system.
We have installed:
Business Object Enterprise XI 3.1
Crystal report 2008
When we are trying to execute report in BO INFOVIEW on production system, we are facing following error (After 10 mins of execution).
========================================================================================
Windows Internet Explorer
Stop running this script?
As script on this page is causing Internet Explorere to tun slowly.
If it continues to run, your computer might become
unresponsive.
========================================================================================
Please note: We are getting data via Crytal report. Only, execution in infoview is giving error.
If we are executing same report with less data(E.g a days data) then we are getting output in Infoview.
However, when we execute report with more data (6 months data) then we are getting attached error after 10 min of execution time.
Helpfull reply will be awarded.
Regards.
Edited by: Nirav Shah on Dec 14, 2010 6:19 AMIf it is indeed a server timeout issue, the following document might be usefull: http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/606e9338-bf3e-2b10-b7ab-ce76a7e34432
It's about Troubleshooting Time-outs in BusinessObjects Enterprise XI, but a lot is still applicable.
Hope this helps...
Martijn van Foeken
Focuzz BI Services
http://www.focuzz.nl
http://nl.linkedin.com/in/martijnvanfoeken
http://twitter.com/mfoeken -
Error when executing query with variables in excel
When I execute a query in excel, it gives some errors if it has some variables (From Date, To Date etc):
Error Specify a value for variable From Date
Error Specify a value for variable To Date
I need to execute the query and then save a view. I want to do this in excel as I am not able to save a view if I execute in a web browser.Hi Sanjeev.
Of course Excel supports input of variable values.
What version of BW/BI both backend and frontend are you using?
Please check if you can execute the query in TA RSRT. You could try to generate the query again here.
Hope it helps.
BR
Stefan -
Web Analysis Error -- Error while executing query and retrieving data
Regarding Web Analysis:
We have a number of reports that we created. yesterday they were all working fine. today we try to open them and most are generating an error.
The error is:
Error while executing query and retrieving data.; nested exception is:
com.hyperion.ap.APException: [1033] Native:
1013033[Thu Oct 22 09:08:17
2009]server name/application name/database name/user name/Error91013033)
ReportWriter exit abnormally
Does anyone have any insight into what is going on?
My version information is:
Hyperion System 9 BI+ Analytic Administration Services 9.3.0.1.1 Build 2
Web Analysis 9.3.0.0.0.286
Thanks in advance for your help.
DaveWHi,
And also click on check option by opening the query in Query designer,as Mr . Arun suggested.
And if you get any error in checking, see the long message(detail).
With rgds,
Anil Kumar Sharma .P -
Error when executing query without passing variable selection
Hi Gurus
I am getting an error while executing a query with out passing values for variables
When executing the query by passing the filter values report returns the data
When executing the query with out passing variable selections the error message is
Unknown error in SQL interface
Error reading the data of Info Provider ZCRM_O08
Error while reading data; navigation possible
System error in program SSAPLRS_EXCEPTION and form
RS_EXCEPTION_TO_MESSAGE
No Data Available
can any one please help me in resolving this
Thank youHi Srini
Thanks for your quick response
When i am executing the query with selection it is returning the data
giving error when executing with out passing the selection
is there any other cause for this problem
like any particular info object causes this sort of problem
Thank you -
Error when executing interface which load data from csv file which has 320
Hi,
Can some one provide a resolution for below error:
I have created an interface which load data from csv file which has 320 columns, to a Synonym which has 320 columns in it
using LKM File to SQL, IKM Sql Control Append.
I am getting below error when executing the interface :
com.sunopsis.tools.core.exception.SnpsSimpleMessageException: ODI-17517: Error during task interpretation. Task: 6 java.lang.Exception: BeanShell script error: Sourced file: inline evaluation of: ``out.print("The application script threw an exception: java.lang.StringIndexOutOf . . . '' Token Parsing Error: Lexical error at line 2, column 42. Encountered: "\\" (92), after : "": <at unknown location> BSF info: Create external table at line: 0 column: columnNo
at com.sunopsis.dwg.codeinterpretor.SnpCodeInterpretor.transform(SnpCodeInterpretor.java:485)
at com.sunopsis.dwg.dbobj.SnpSessStep.createTaskLogs(SnpSessStep.java:711)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:461)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:662)
Caused by: org.apache.bsf.BSFException: BeanShell script error: Sourced file: inline evaluation of: ``out.print("The application script threw an exception: java.lang.StringIndexOutOf . . . '' Token Parsing Error: Lexical error at line 2, column 42. Encountered: "\\" (92), after : "": <at unknown location>
BSF info: Create external table at line: 0 column: columnNo
at bsh.util.BeanShellBSFEngine.eval(Unknown Source)
at bsh.util.BeanShellBSFEngine.exec(Unknown Source)
at com.sunopsis.dwg.codeinterpretor.SnpCodeInterpretor.transform(SnpCodeInterpretor.java:471)
... 11 more
Text: The application script threw an exception: java.lang.StringIndexOutOfBoundsException: String index out of range: 2 BSF info: Create external table at line: 0 column: columnNo
out.print("createTblCmd = r\"\"\"\ncreate table ") ;
out.print(odiRef.getTable("L", "COLL_NAME", "W")) ;
out.print("<?=(extTabColFormat.getUseView())?\"_ET\":\"\"?>\n(\n\t") ;
out.print(odiRef.getColList("", "[CX_COL_NAME]\\t"+
"<?=extTabColFormat.getExtTabDataType(\\u0022[CX_COL_NAME]\\u0022,\\u0022[SOURCE_DT]\\u0022, \\u0022[DEST_WRI_DT]\\u0022, \\u0022[COL_FORMAT]\\u0022, \\u0022[BYTES]\\u0022, \\u0022[LONGC]\\u0022, \\u0022[SCALE]\\u0022)?>"
, ",\\n\\t", "","")) ;
out.print("\n)\nORGANIZATION EXTERNAL\n(\n\tTYPE ORACLE_LOADER\n\tDEFAULT DIRECTORY dat_dir\n\tACCESS PARAMETERS\n\t(\n\t\tRECORDS DELIMITED BY 0x'") ;
out.print(odiRef.getSrcTablesList("[XFILE_SEP_ROW]","")) ;
out.print("'\n\t\t") ;
out.print(odiRef.getUserExit("EXT_CHARACTERSET")) ;
out.print("\n\t\t") ;
out.print(odiRef.getUserExit("EXT_STRING_SIZE")) ;
out.print("\n\t\tBADFILE\t\t'") ;
out.print(odiRef.getSrcTablesList("", "[RES_NAME]", "", "")) ;
out.print("_%a.bad'\n\t\tLOGFILE\t\t'") ;
out.print(odiRef.getSrcTablesList("", "[RES_NAME]", "", "")) ;
out.print("_%a.log'\n\t\tDISCARDFILE\t'") ;
out.print(odiRef.getSrcTablesList("", "[RES_NAME]", "", "")) ;
out.print("_%a.dsc'\n\t\tSKIP \t\t") ;
out.print(odiRef.getSrcTablesList("", "[FILE_FIRST_ROW]", "", "")) ;
out.print("\n") ;
if (odiRef.getSrcTablesList("", "[FILE_FORMAT]", "", "").equals("F")) {out.print("\n\t\tFIELDS\n\t\t") ;
out.print(odiRef.getUserExit("EXT_MISSING_FIELD")) ;
out.print("\n\t\t(\n\t\t\t") ;
out.print(odiRef.getColList("", "[CX_COL_NAME]\\tPOSITION([FILE_POS]:[FILE_END_POS])\\t"+
"<?=extTabColFormat.getExtTabFormat(\\u0022[CX_COL_NAME]\\u0022,\\u0022[SOURCE_DT]\\u0022, \\u0022DEST_WRI_DT\\u0022, \\u0022[COL_FORMAT]\\u0022, \\u0022[BYTES]\\u0022, \\u0022[LONGC]\\u0022, \\u0022[SCALE]\\u0022)?>"
, ",\\n\\t\\t\\t", "","")) ;
out.print("\t\t\n\t\t)\n\t)\n") ;
} else {out.print("\n\t\tFIELDS TERMINATED BY x'") ;
out.print(odiRef.getSrcTablesList("", "[XFILE_SEP_FIELD]", "", "")) ;
out.print("'\n\t\t") ;
if(odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").equals("")){out.print("\n\t\t") ;
} else {out.print("OPTIONALLY ENCLOSED BY '") ;
out.print(odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").substring(0,1)) ;
out.print("' AND '") ;
out.print(odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").substring(1,2)) ;
out.print("' ") ;
}out.print("\n\t\t") ;
out.print(odiRef.getUserExit("EXT_MISSING_FIELD")) ;
out.print("\n\t\t(\n\t\t\t") ;
out.print(odiRef.getColList("", "[CX_COL_NAME]\\t"+
"<?=extTabColFormat.getExtTabFormat(\\u0022[CX_COL_NAME]\\u0022,\\u0022[SOURCE_DT]\\u0022, \\u0022DEST_WRI_DT\\u0022, \\u0022[COL_FORMAT]\\u0022, \\u0022[BYTES]\\u0022, \\u0022[LONGC]\\u0022, \\u0022[SCALE]\\u0022)?>"
, ",\\n\\t\\t\\t", "","")) ;
out.print("\t\t\n\t\t)\n\t)\n") ;
}out.print("\tLOCATION (") ;
out.print(odiRef.getSrcTablesList("", "'[RES_NAME]'", "", "")) ;
out.print(")\n)\n") ;
out.print(odiRef.getUserExit("EXT_PARALLEL")) ;
out.print("\nREJECT LIMIT ") ;
out.print(odiRef.getUserExit("EXT_REJECT_LIMIT")) ;
out.print("\n\"\"\"\n \n# Create the statement\nmyStmt = myCon.createStatement()\n \n# Execute the trigger creation\nmyStmt.execute(createTblCmd)\n \nmyStmt.close()\nmyStmt = None\n \n# Commit, just in case\nmyCon.commit()") ;
****** ORIGINAL TEXT ******
createTblCmd = r"""
create table <%=odiRef.getTable("L", "COLL_NAME", "W")%><?=(extTabColFormat.getUseView())?"_ET":""?>
<%=odiRef.getColList("", "[CX_COL_NAME]\t"+
"<?=extTabColFormat.getExtTabDataType(\u0022[CX_COL_NAME]\u0022,\u0022[SOURCE_DT]\u0022, \u0022[DEST_WRI_DT]\u0022, \u0022[COL_FORMAT]\u0022, \u0022[BYTES]\u0022, \u0022[LONGC]\u0022, \u0022[SCALE]\u0022)?>"
, ",\n\t", "","")%>
ORGANIZATION EXTERNAL
TYPE ORACLE_LOADER
DEFAULT DIRECTORY dat_dir
ACCESS PARAMETERS
RECORDS DELIMITED BY 0x'<%=odiRef.getSrcTablesList("[XFILE_SEP_ROW]","")%>'
<%=odiRef.getUserExit("EXT_CHARACTERSET")%>
<%=odiRef.getUserExit("EXT_STRING_SIZE")%>
BADFILE '<%=odiRef.getSrcTablesList("", "[RES_NAME]", "", "")%>_%a.bad'
LOGFILE '<%=odiRef.getSrcTablesList("", "[RES_NAME]", "", "")%>_%a.log'
DISCARDFILE '<%=odiRef.getSrcTablesList("", "[RES_NAME]", "", "")%>_%a.dsc'
SKIP <%=odiRef.getSrcTablesList("", "[FILE_FIRST_ROW]", "", "")%>
<% if (odiRef.getSrcTablesList("", "[FILE_FORMAT]", "", "").equals("F")) {%>
FIELDS
<%=odiRef.getUserExit("EXT_MISSING_FIELD")%>
<%=odiRef.getColList("", "[CX_COL_NAME]\tPOSITION([FILE_POS]:[FILE_END_POS])\t"+
"<?=extTabColFormat.getExtTabFormat(\u0022[CX_COL_NAME]\u0022,\u0022[SOURCE_DT]\u0022, \u0022DEST_WRI_DT\u0022, \u0022[COL_FORMAT]\u0022, \u0022[BYTES]\u0022, \u0022[LONGC]\u0022, \u0022[SCALE]\u0022)?>"
, ",\n\t\t\t", "","")%>
<%} else {%>
FIELDS TERMINATED BY x'<%=odiRef.getSrcTablesList("", "[XFILE_SEP_FIELD]", "", "")%>'
<% if(odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").equals("")){%>
<%} else {%>OPTIONALLY ENCLOSED BY '<%=odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").substring(0,1)%>' AND '<%=odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").substring(1,2)%>' <%}%>
<%=odiRef.getUserExit("EXT_MISSING_FIELD")%>
<%=odiRef.getColList("", "[CX_COL_NAME]\t"+
"<?=extTabColFormat.getExtTabFormat(\u0022[CX_COL_NAME]\u0022,\u0022[SOURCE_DT]\u0022, \u0022DEST_WRI_DT\u0022, \u0022[COL_FORMAT]\u0022, \u0022[BYTES]\u0022, \u0022[LONGC]\u0022, \u0022[SCALE]\u0022)?>"
, ",\n\t\t\t", "","")%>
<%}%> LOCATION (<%=odiRef.getSrcTablesList("", "'[RES_NAME]'", "", "")%>)
<%=odiRef.getUserExit("EXT_PARALLEL")%>
REJECT LIMIT <%=odiRef.getUserExit("EXT_REJECT_LIMIT")%>
# Create the statement
myStmt = myCon.createStatement()
# Execute the trigger creation
myStmt.execute(createTblCmd)
myStmt.close()
myStmt = None
# Commit, just in case
myCon.commit().
at com.sunopsis.dwg.dbobj.SnpSessStep.createTaskLogs(SnpSessStep.java:738)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:461)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:662)The issue is encountered because the text delimiter used in the source file did not consist of a pair of delimiters.
Please see support Note [ID 1469977.1] for details. -
Error in flatfile load - date not compliant with user date settings
Hi,
I want to load a flatfile into BI 2004s.
so i created a flatfile datasrource, transformation etcetc.. all fine so far.
the file contains 2 dates in format YYYYMMDD and are loaded in DATS infoobjects (also yyyymmdd).
but when i load the data into the PSA it immediatly dumps with error message "19771009 does not match the user-dependent date format --> long text"
the long text sais 19771009 does not correspond to the date format that is assigned to the current user BIWREMOTE. which is correct.. cos there date is DD-MM-YYYY
when i change the date format in the user settings to YYYY-MM-DD it works fine...... in the forground. In the background,whatever i do, it dumps with this errormessage.
so i have 2 questions:
since when is, while loading to the PSA, the date format linked&checked with the date format in the user setting? i cannot recall ever having this issue.
did anyone encounter this problems.
grtz
rogierHi ,Ronald Silberst,R. Poelmann,
I am facing similar kind of problem, Could u please tell me how you overcome this problem. How to set and adding the RSDAT convesion routine into the datasource definition.
Appreciate your help . Can any one have some idea please share.
Regards
Ramesh -
Internet Explorer Script Error when running report with user-entered params
We are using Crystal Reports Version 11.0.0.1282. We have multiple copies each installed on a separate computer. We have a relatively simple report with a prompt for 2 values (parameters) to be selected or input by the users. The desktop is either Windows XP SP3 or Windows Server 2003 SP2 On all the XP/SP3 computers, this report works as expected. On the exception computer, the Windows Server2003 Desktop, we see the prompting screen with place holders for graphics instead of the buttons. When we attempt to select a value for the parameter by keying in the value and clicking on the OK link (no button), we see message box titled "Internet Explorer Script Error" with text: An error has occurred in the script on this page.
Line: xxx (varies depending on param chosen)
char 1
error: Object expected
url: file:///c:/doc...../temp/1/prompting1.html
===============================
Searhing around the forum and using Google, I found a suggestion to be copying the "prompting" folder and dll from a known working system - tried this, it didn't work.
So. I still need a solution. Any other suggestions??
Edited by: Grant Ellsworth on Mar 16, 2009 10:29 PM>> I do not think it is because of the parameters you are entering/using, try without using the
>> parameters (just for testing), if you still get the error then its not the parameters which is causing
>> the problem.
If I create the report without asking for user-entered params, it works.
>> Can you please specify the browser and the tool to display the report you are using? Generally the
>> error popps up when there are any mistakes in html or if you are using a javascript which has a error.
The active browser on the computer is IE7 - 7.0.5730.13
I am using the installed crystal reports 11 program to run the report. I open the report in CR by going to File/Open and selecting the report. Then I get prompted for my ms sql login info, which I enter. Then I see the "Enter Values" window with my data entry fields; but I don't see the nice formatting and buttons which I see when I run this from the other computers; I see only the placeholders. I select or enter data and click on the "OK" link. Then the message box pops up. The message box pops up when I click on any of the links or on the "x" in the upper right. Mesage box is explicit - Intenet Explorer Script Error, etc., as I described in my original post.
Thanks
Azhar -
Hi,
I have a report created using the infoset as an infoprovider. There are multiple reports created with this infoprovider. Few of them are working fine and few of them are not. The error for such erroneous reports are as below. Recently we upgraded BW to EHP1 and the problem has occurred since the upgrade. The error is
EError reading the data of InfoProvider ZPA_IS01
EIllegal selection by InfoObject from outer join table
EErrors occurred during parallel processing of query 1, RC: 3
EError while reading data; navigation is possible
I>> Row: 54 Inc: WRITE_MESSAGES Prog: CL_RSDR_AT_QUERY
I have checked the query. It is fine. I compared the query with that of Production and even that is fine.
This issue is in the development and test environments.
Any help would be greatly appreciated.
Regards
AlbinaHi,
Recently we went for BW upgradatiaon (BI7.0) , the error you are facing could be due to the following issue,
If infoobjects are used in infoset as infoprovider ( in BW3.5) after upgrade this infoobjects will not be selected automatically as infoproviders. So it will not be available for Infoset.
Please check whether any infoobjects are used as infoprovider, if so manually change them as infoprovider ( In BI7) and activate.
Since, few reports are working on the infoset , this could be those reports are not using the fields from the infoobjects. so it is working it seems.
Please check and let me know.
Thanks,
V.Senthil -
Error while executing Query with Variable.
Hi All,
I have written a query to fetch values from some user tables and sap tables. The query is as below.
select a.docentry,a.u_scname,e.block,e.[City],
e.[Country], e.[State1],
e.[StreetNo], e.[ZipCode],
e.[Building], e.[Cellular],a.[U_WONo], a.[U_DocDate],
a.[UserSign], b.[LineId], b.[U_Des],
b.[u_SDes], b.[U_UoM],
b.[U_Qty], b.[U_Rte],
b.[U_Tamt], a.[U_PrjName], a.[u_WO_PB],
a.[U_WO_UL], a.[U_WO_FC],
a.[U_WO_PYT], a.[U_WO_COP],
a.[U_WO_TRMT], a.[U_WO_DocSub],
a.[U_WO_ADV], a.[U_WO_OCondition],
a.[U_WO_PRPBY], a.[U_WO_RCMBY],e.[CntctPrsn],
(T4.[WhsName]+ '-' + T4.[Street] +'-' + T4.[Block]) as 'Work Address ',
T4.[Building], T4.[City],
T4.[ZipCode], T4.[U_PMCNT], T4.[WhsName], e.Taxid0
from [@e360_owor] as a join [@e360_wor1] as b
on a.docentry = b.docentry
left outer join
( select c.cardname,d.TaxId0,d.Taxid1, c.block, c.[City],
c.[Country], c.[State1],
c.[StreetNo], c.[ZipCode],
c.[Building], c.[Cellular], c.[CntctPrsn] from ocrd
as c join crd7 as d on c.cardcode = d.cardcode
where d.TaxId0 is not <b>null</b> ) as e
on
a.U_SCName = e.CardName
left outer join OWHS T4 on T4.[WhsName] = a.[U_Prj]
where
a.U_WONo = '[%0]'
In this code, when the variable is assigned to field U_WONo, then I get an error
Must Specify A Table To Select From. Statement 'Service Contractors' (OCTR) (s) could nto be prepared.
But when the values for variables are hard coded, the query executes.
I have been working on it from long time, but same error exists. Could anybody help resolve the same...
I am using SAP B1 2007 B, patch level 15.
Thanks in advance,
Regards
RohanThe error messages may be misleading. With complicated queries with parameter request I frequently saw references to service contract (or something other).
Sometimes SBO does not manage correctly variables in complicated queries and there is a note about the workaround to solve the problem:[Note730960|https://websmp130.sap-ag.de/sap/bc/bsp/spn/sapnotes/index2.htm?numm=730960] -
Error when executing query CL_RSR_RRK0_ATTR_C
Hi Gurus,
I activated the query '0CCA_C11_Q0002' from BI content.When i execute the query i am getting the error message: 'System error in program CL_RSR_RRK0_ATTR_C and form CHECKALVL-01- (see long text)'.
I execute the same in RSRT1 with 'ABAP Web' , i got the same error message.
But when i click on "Genarate Report' tab i got "Text variable 0T_FPERY in "Variance &0T_FPERY&" cannot be replaced - value not found".
Can any one help me to solve the problem.
*Points to be assigned
Thanks
Raju.kPlease refer the note : 1091018
A query terminates with message BRAIN 299: "System error in program CL_RSR_RRK0_ATTR_C and form SELTO_SELDR_14-02-".
Reason and Prerequisites
This problem is caused by a program error.
The error occurs if a query does not contain any key figures, but a non-cumulative key figure has to be read becasue of the "Virtual Characteristics and Key Figures" user exit.
Solution
After you implement the corrections, you must regenerate the affected queries.
SAP NetWeaver 7.0 BI
Import Support Package 16 for SAP NetWeaver 7.0 BI (BI Patch 16 or SAPKW70016) into your BI system. The Support Package is available when Note 1074388 "SAPBINews BI7.0 Support Package 16", which describes this Support Package in more detail, is released for customers.
In urgent cases, you can implement the correction instructions as an advance correction.
You must first read Note 875986, which provides information about transaction SNOTE.
To provide information in advance, the notes mentioned above may already be available before the Support Package is released. In this case, the short text of the note still contains the words "Preliminary version".
Regards
SK. -
Error when executing query its urgent
hi,
when iam executing my query in query designer through web morning i got the result in web.
but when iam executing the same query in wad it is throughing an error like (System error in program SAPLRRK0 and form GET_FIELD_POSITION-01-))
now again i check that one in querydesigner again it is showing the same error in querydesigner also
vijayHi,
Refer Note 931975 - Problems when you execute a query
Symptom
At runtime, a query contains a generated ABAP program and a data structure, which is stored in the shared buffer. Due to the gap described here, the version of the ABAP program may not correspond to the version of the data structure.
This causes several terminations when you execute this query:
X299 Brain SAPLRRK0; Form GET_FIELD_POSITION-01-,
X299 Brain SAPLRRK0; Form APPEND_KHANDLE_1-02-,
ASSIGN COMPONENT L_FIELDNAME OF STRUCTURE C_SX_GVAR, and others.
Other terms
RSIX, SX_REPORT,
Reason and Prerequisites
The error can occur if one person changes a query and another person simultaneously executes the query. A query may also be changed implicitly if one of the objects used in the query is changed in another query.
Solution
The attached corrections apply only to Releases 3.X. An advance correction cannot be provided for NetWeaver 2004s.
Before you implement the attached correction (in 3.X), you must change the two following method interfaces. Otherwise syntax errors occur in the CL_RSR_REPORT_RSIX class and the RRI0 function group when you implement the corrections.
1. In Transaction SE24: Change the MODIFY method of the CL_RSR_REPORT_RSIX class as follows:
Insert the I_S_RKB1D import parameter with the type RSR_S_RKB1D.
2. In Transaction SE24: Change the READ_SX_REPORT method of the CL_RSR_REPORT_RSIX class.
Delete all existing import parameters (that is, I_GENUNIID, I_DVERS, I_IDVERS and I_GENTIME) and insert the I_S_RKB1D import parameter with the type RSR_S_RKB1D.
After you implement the corrections, you must delete the incorrect information in the shared buffer. To do this, enter '/$SYNC' in the command field in every application server. Alternatively, you can also call RSRT -> Environment -> Generate Queries. As a result, all queries are regenerated but all OLAP caches are rejected.
BW 3.0B
Import Support Package 31 for 3.0B (BW 3. 0B Patch 31 or SAPKW30B31) into your BW system. The Support Package is available when Note 0872272 "SAPBWNews BW 3.0B Support Package 31", which describes this Support Package in more detail, is released for customers.
BW 3.10 Content
Import Support Package 25 for 3.10 (BW 3. 10 Patch 25 or SAPKW31025) into your BW system. The Support Package is available when Note 0872274 "SAPBWNews BW 3.1 Content Support Package 25", which describes this Support Package in more detail, is released for customers.
BW 3.50
Import Support Package 17 for 3.5 (BW 3. 50 Patch 17 or SAPKW35017) into your BW system. The Support Package is available when Note 0872277 "SAPBWNews BW Support Package 17 NetWeaver'04 Stack 17", which describes this Support Package in more detail, is released for customers.
SAP NetWeaver 2004s BI
Import Support Package 08 for SAP NetWeaver 2004s BI (BI Patch 08 or SAPKW70008) into your BI system. The Support Package is available when Note 0872280 "SAPBINews BI 7.0 Support Package 08", which describes this Support Package in more detail, has been released for customers.
In urgent cases, you can use the correction instructions.
To provide information in advance, the notes mentioned above may be released before the Support Package is available. In this case, however, the short text of the notes still contains the words "preliminary version".
Thanks -
Runtime Error when executing Query in the web
Hello,
when i try to execute a query on the web, i get the error
Exception in BI runtime
Log ID: 005056BD15DA005E000000A900000A3400043C8F00E4DD8B
Initial cause
Message:
'user' missing
Stack trace:
com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: 'user' missing
Message:
No connection possible to BI master system VB0CLNT800
Stack trace:
com.sap.ip.bi.base.service.connection.ConnectionException: No connection possible to BI master system VB0CLNT800
Can anyone please tell me , how to fix this ..
Thanks
Rajyou mwy check this to trouble shoot front end
Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation -
Calculated keyfigures not defined correctly error when executing query
Hi Experts,
I changed calculations in the calculated keyfigures and saved successfully.
when I execute the query in BI7 Bex, I am getting errors like query element not defined correctly in the query. when I look into query in the designer its giving info messages for many calculated keyfigures saying reusable and saving can influence other queries.
I reverted back the changes but the errors still coming up. I tried to copy the query and run it ..still didnt helped..
Please suggest me with the solution..
Quick replies are much appreciated and awarded.
Thanks
VanajaHi,
The calculated keyfigure is the difference of two other calculated keyfigures...
I tried to re-drag and drop into keyfigures column and didn't worked and still getting the errors.
Please suggest some more..
Thanks
Vanaja -
Java.sql.SQLException: ORA-00933: error when executing query
Hello,
I am trying to execute the following query from a jsp page.
String sqlUpdate ="UPDATE table_name SET name ='"+name+"', description='"+description+"', proj_link='" projlink"', active='" active"',sort_order='" order"',image='" image"',category='" category"', technology='" technology "' WHERE id="+id+" ";
stmt.executeQuery(sqlUpdate);
I get the follwoing error java.sql.SQLException: ORA-00933: SQL command not properly ended
When I omit "description" from the query it executes fine. But when I place it back into the query I get the above error. The table is in Oracle database and the datatype of description id varchar2(4000). I declared all the variables used in the query, I then assigned values caught from the form and then am trying to update the form varibles in the table.
Thanks,
Nikky128Nikky128 wrote:
Hello,
I am trying to execute the following query from a jsp page.There's a big part of your problem. You shouldn't be doing database stuff in JSPs. If you must, you should be using JSTL and its <sql> tags.
String sqlUpdate ="UPDATE table_name SET name ='"+name+"', description='"+description+"', proj_link='" projlink"', active='" active"',sort_order='" order"',image='" image"',category='" category"', technology='" technology "' WHERE id="+id+" ";Not using PreparedStatement here is just a silly noob error.
When I omit "description" from the query it executes fine. But when I place it back into the query I get the above error. The table is in Oracle database and the datatype of description id varchar2(4000). I declared all the variables used in the query, I then assigned values caught from the form and then am trying to update the form varibles in the table.Probably a single or double quote that you can't see. PreparedStatement will eliminate that problem.
%
Maybe you are looking for
-
Adapter Module for SSL Configuration
Hi, We have JMS -> PI -> SAP ECC scenarios (both way). We have to develop an Adapter Module which will be able to provide SSL communication with the end-system (JMS). We have a JAVA developer who will help in writing the module code; however he is no
-
How do I retrive date field using Xpath
How do I retrive data,which is in date format in XML file using XPath query. If this is not possible, Is there any other alternative? Bye
-
How do I modify a Purchase Order format
I need to modify a PO doc which is built using a XML publisher... How do I change this? Thanks.
-
Save a file directly into the particulor directory
While i click on a button , The value of that button shd store in one file and that file shd save in particulor directory.plz suggest how can i implement this? Message was edited by: user580818
-
Getting error message while defining Profit Center
Dear Expert, Kindly suggest while adding profit center in profit center setup on profit center field earlier it allowed to save the profit center name in alpha numeric but recently we are getting error message while updating or adding on new profit c