Error when generating Alter Record scripts with project PPLTLS84CUR

I am trying to install HR89 + PT849 on REL5.4 + Oracle 10g manually under the guideline of official document: PeopleTools 8.49 Installation for Oracle.pdf
After Database creation, need to upgrade Peopletools from the delivered version 8.46 to 8.49
In page 570, Task B-15-6: Alter PeopleTools Tables, need to generate build scripts from project PPLTLS84CUR and then run the scripts from SQLPLUS side.
Bu when generating the scripts with user PS/PS, the App Designer got error message as following:
PS General Routines
Out of available memory. -
e:\pt849-903-R1-retail\peopletoos\SRC\pssys\rdmfld.app @ 998
click OK, process can continue but the result can show: "Error: APPR_RULE_HDR - Alter process was unsuccessful. (76,42) "
not only this record but also many others.
In client PC which running app designer, the memory is enough for app designer, 1G free. Really hard to understand such error.
Any reply will be much appreciated.
Andy
Edited by: Andy xu on 2012-5-14 上午2:22

thank you for your reply.
client pc is running on windows 7 and UAC is already disabled.
current user running app designer is belong to Administrator group, hence, this may be a client security problem.
I search on oracle website and found a page said this maybe a bug and be fixed from 8.49.11, this is why it is working on 8.49.13, and the wordaround solution is use non-vista pc, such as windows xp. :)
https://support.oracle.com/CSP/ui/flash.html#tab=KBHome(page=KBHome&id=()),(page=KBNavigator&id=(from=BOOKMARK&viewingMode=1143&bmDocTitle=E-QR:%20When%20modifying%20Criteria%20for%20certain%20Queries,%202-tier/3-tier%20Query%20Manager%20tool%20is%20generating%20error,%20%22Out%20of%20available%20memory%20-%20e:pt84814b%20-%20retailpeopletoolsSRCpssysqdmsel.cpp@1381%22&bmDocType=PROBLEM&bmDocDsrc=KB&bmDocID=659150.1))

Similar Messages

Error when generating create table script

Hi,
I am trying to generate create table script from an existing table. But I get the following error when doing so,
ORA-20001: Rem Unable to generate DDL for ORA-06502: PL/SQL: numeric or value error ORA-31605: the following was returned from LpxXSLResetAllVars in routine kuxslResetParams: LPX-1: NULL pointer ORA-22921: length of input buffer is smaller than amount requested .
Any suggestions on what could be wrong?
Thanks.
-B

this is my bad, i should have updated this thread when we originally troubleshot this issue...
that error you're getting on htmldb.oracle.com when you try to generate ddl for tables and such is a manifestation of a database bug (#3372908) that's recently been filed. checking the worklog for that bug suggests that those guys are still working out the issue. unfortunately, there's no current work-around on htmldb.oracle.com at the moment. if you want to generate ddl for your objects, you'd have to query the appropriate data dictionary views to get the info you need.
...i'll update the htmldb.oracle.com interface in a bit to prevent other users from hitting this issue. so you know, this is only an issue on db versions 9.2.0.3 and 9.2.0.4 running on some platforms and only (as far as i know) those using the AL32UTF8 characterset ...which does include our hosted site for now.
hope this helps,
raj

Error when generating transport dataset (transfering queries with RSAQR3TR)

Hi!
I try to transfer queries from one system to other.
Systems are not connected with each other, so no transports are available.
I am doing like this:
- running program RSAQR3TR in "old" system
- downloading a query as TXT file into my PC
- running program RSAQR3TR in "new" system
- uploading TXT file into "new" system and get a message - "Error when generating transport dataset"
I have only query and user group in "old" system. Is this information enough to transfer them to "new" system?
<b><REMOVED BY MODERATOR></b>
Mindaugas
Message was edited by:
Alvaro Tejada Galindo

Hi,
Step 1. Run RSAQR3TR in 'old' system. Select EXPORT and specify the objects to be transported.
(System includes these in an automatically created transport request)
Step 2. Release this transport and request it be transported to 'new' system.
(This results in the entries being populated in transport table AQTDB in 'new' system).
Step 3. Run RSAQR3TR in 'new' system. Select IMPORT and tick the Overwrite checkbox. Specify the transport number in the field labelled 'dataset with imports'.
(RSAQR3TR gives the message that stuff has been imported OK).
Step 4. if you still couldn't find the queries, so ran RSAQR3TR one more time, this time specifying 'Copy Standard Area -> Global Area'
Regards
Sudheer

Error 500 Internal Server Error" When Generating Hyperion Financial Reports in PDF Format

We are unable to open pdf reports in Workspace with the following error. It was all working fine and doesn't work now for unknown reasons.
Error 500 Internal Server Error" When Generating Hyperion Financial Reports in PDF Format
We are on 11.1.2.1 environment. Ghost Script 8.54 and Java heap settings xms256m and xmx512m.
Please advice.

hello,
just to clarify
a) the parameter is named DESFORMAT not :DESFORMAT, there is
no : in front of the name, if you submit it via URL !
b) there are some issues with acrobat5 and IE but those are not
only caused by PDFs generated with oracle reports.
regards,
the oracle reports team --pw

BW Statistics-BI7-Error when generating the update program

Dear All,
We faced the below problem in while executing the infopackages for BW statistics in BI7.0
7099 records from 7099 records..but shows request is red.
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update rules
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
Update rules ( 7089 -> 0 Records ) : Errors occurred (RED)
Update rules ( 7089 -> 0 Records ) : Errors occurred
InfoCube 0TCT_C23 will be updated
Error when generating the update program (RED)
Is there any notes to apply for this?
Initilaztion is executed with out any errors!!
Regards

Hi
Caller 01 : If there is any inconsistecy while loading the data or if the program cannot able to execute a specific task it will give the caller errors.
check in the transaction ST22
check for the OSS notes 631668, 860475
Check the below links which have a discussion on the same problem.
A caller 01, 02 or equal to or greater than 20 contains an error meesage
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
ERROR?
Data load System error
Hope this will help
Regards
Shilpa

Error when generating the report (see long text), Message no. AQ_AD_HOC221

Hi All,
I am facing a peculiar problem while executing an infoset query.I have created 2 customized fields Compa-ratio and PIR in infotype 0008 in an infoset.I have coded in these additional fields.
When I execute a query using 1 of these customized fields the report is generated correctly.But when I put both the fields in the output the report shows an error "Error when generating the report (see long text)". The message# associated with this errAQ_AD_HOC221.
I have also checked the data types and the references. Nothing seems to be wrong here.
Does anybody has any clue about this ?
Kajal

Hi Bernd,
I had a look at those notes. But the information provided did'nt prove to be helpful. I found out the problem. I was using the same local variable for both the fields in their code. This generated the error. This error is a very generic one and does'nt help in finding out what exactly is the problem.
I changed the other local variable and it started working. When I was using the same variable that time I did'nt forget to clear the values but the query still generated the error.
Anyways thanks a lot for the reply.
Kajal

Short dump error when extracting delta records from R/3

I am working on BW 3.5 and I am facing some short dump error when extracting delta records from the r/3 to BW.
Below is the error message
Kindly do the needful ASAP.
Job started
Step 001 started (program SBIE0001, variant &0000000024277, user ID BWREMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 0ISCM_PAYMENT_01
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 2000000000                              *
abap/heap_area_total.......... 2000000000                              *
abap/heaplimit................ 40000000                                *
zcsa/installed_languages...... DE                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 6500000                                 *
ztta/roll_extension........... 2000000000                              *
2,454 LUWs confirmed and 2,454 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DAT
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled

Hi,
I look at the transaction ST22 to see which type of error has given you. Take a look at the notes to correct the error.
Another option is to look at OSS notes, because the error is giving you a standard extractor.
Greetings,

Error when Generating the Program

Recently there was an SP upgrade and my Planning Book started giving me this error message (SCM version =5.0 and SP = 7)
"Error when generating the program" Message no. /SAPAPO/TSM141
Diagnosis: Generated programs are programs that are generated based on individual data objects, such as planning object structure, planning areas and Infocubes. These programs are then executed in the transaction. An error occured during the generation of such a program
Possible causes:
1. The template has been corrupted
2. The object that the template uses to generate the program contains inconsistencies; for instance an Infocube has not been activated
This error occurs when I try to open the my planning book/creating the selection profile. I've re-activated the Infocube and later deactivate and active my POS and tried to do the same for the Planning Area....but the error still persists. I tried to create a new planning area and tried it again but the error still persists. I've tried to fix any inconsistencies in the planning area time series objects by running the consistency check....however the same error pops up during the consistency check....
Anyone encountered this error message and any possible solutions to this issue.
Thanks
Surender

I did find an ABAP Dump when looking at ST22. The short message is as follows:
Runtime Errors         GEN_BRANCHOFFSET_LIMIT_REACHED
Date and Time          05/14/2007 19:33:54
Short text
     Jump distance is too large and cannot be generated.
What happened?
     A jump distance is too large and cannot be generated.
     A control structure or a routine with "CHECK" or "EXIT" contains
     too many ABAP statements.
     Error in the ABAP Application Program
     The current ABAP program "GP_MET_PSTRU_BASIC_FORMS" had to be terminate
      because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     During the generation of program "GP_MET_PSTRU_BASIC_FORMS", the system
      determined that
     within an ABAP event a control structure (for example, IF..ENDIF
     or LOOP..ENDLOOP) or a routine (for example, FORM routine) has
     become too large. The resulting jump distance is too large so that
    it could no longer be generated.
    With the internal load format, the jump distance must not be
    greater than 32768 (this is the size of approximately 10.000
    ABAP statements).
    The jump distance that is to be generated, however, is 50885.
How to correct the error
   The ABAP application program must be changed.

'Error when generating the selection screen "0500"

Dear all,
I have copied a function group QEES to ZQEES through SE80. In that I have copied all screens, includes, function modules etc..
Now when I activate the ZQEES, I get an error 'Error when generating the selection screen "0500" of report "SAPLZQEES'.
There is no problem with screen 0500, I have activated it.
But when I activate ZQQES, I get the error.
Please let me know the reason for this.
It will be highly appr
Thanks in advance,
Sachin

Hi Sachin,
there could be a problem while copying in renaming, delete the Function group ZQEES and recopy the Standrad function group and only rename the the FM QEES_SHOW_SELECTION_SCREEN to ZQEES_SHOW_SELECTION_SCREEN and copy and activate it will work.
regards,
Srini

Error when generating the update program

Hi BW Experts,
I am facing issue while loading data to cubes:
0TCT_C01 & 0TCT_C02
In load monitor (RSMO) -> details> some data pakages are going thru successfully while some are failing with error:
Error when generating the update program
Thanks

Hello,
Try activating both the cubes using RSDG_CUBE_ACTIVATE. Activate them even thou they seem active.
Also you can refer to OSS Notes:
Note 1146851 - BI 7.0 (SP 18): Error RSAU 484 when generating update
Note 1152453 - Termination generating InfoCube write program
Regards,
Shashank

Error when generating master data routines

Hello all,
I´m trying to activate 0BPARTNER but an error appears: Error when generating master data routines, and no more information is provided.
I´m working with BW 7.0.
Has anybody had this problem?
How could I solve it?
Thanks in advance.
Carmen

Hi Carmen,
I'm working with SAP BW 700 and I had also this error during a characteristic activation in my QA system. This happened when I tried to transport the activated characteristic from my DEV system.
I found also message TK425 when I was trying activation through RSDG_IOBJ_ACTIVATE program.
I solved this error message with OSS note 01458319 700SP24: "Transport fails during the impact analysis of DTP".-
I hope this helps.
Best Regards.
AW

Error when generating program /SAPAPO/TSM141

Hello APO Experts!!
I have one infocube for sales history, which has one key figure that contains the sales history values.
First, I was using this key figure in one planning area. This Key Figure Semantics for Read and Write Operations was 002 = Semantics for InfoCube key figures.
Now, I had to include the same key figure in another planning area and with the same configuration Semantics = 002.
The problem is, in my DEV system, the modification was perfect. Then when I did in the QA system, I´ve got the error "Error when generating program /SAPAPO/TSM141" when trying to access the data in the planning books that are created in the first planning area.
For the second planning area, nothing happens, everything is working correctly.
Do you have any idea of what this could be?
Regards
Anglea

Hi
Sounds like a Planning Area extraction problem. First of all check that all your required BW InfoObjects are created for the Planning Areas, then check that the Semantics you mentioned are the same for all Aggregates in the Planning Area.
Also try running program /SAPAPO/TS_PSTRU_GEN to regenerate the planning area extractor.
Delete and recreate the data source.
Hope that helps
Regards
Ian

Error when generating IDoc from MC document - workitem to all the SAP users

A workflow item with the subject of Error when generating IDoc from MC document is sent to all the SAP users' inbox. Is it possible to stop the generation of this work item? If that is not possible, can we limit sending the work item to a specific user/agent instead of all the users in the system?
It appears that these work item or error message are generated when one of the developers reopen the POs and add line items. Moreover, during that time the procurement team blocked the IDOCs from going out to the vendors when changing and resaving the POs. Therefore, we need stop the generation of error message/work item when the IDOCs generation blocked.

Please check Rule 70000141which is the default rule for this task. Inside this rule a FM is attcahed which is reading table EDO13 and EDPP1 where agent is retrieved Probably this table entries are not maintained. This Workflow is getting triggered from Message cOntrol I think.
Please check this link for
http://help.sap.com/saphelp_47x200/helpdata/en/c5/e4aec8453d11d189430000e829fbbd/frameset.htm
<b>Reward points if useful and close thread if resolved</b>

Error when generating master data routines when activating infoobject

Hello Gurus,
I had an issue with one of my info object.
I Created the one Custom InfoObject with Just 5 Char without any masterdata and used that in many cubes. we promoted the objects and cube to test and production systems. just couple of days back we can see the InfoObject went to inactive status even though the version is active(not sure how it happend). This is only happens in our test system and production is working fine. when i try to activate the InfoObject again the test system it gives me an error
Characteristic XXXXX: Error when generating master data routines. Tried to correct in RSD5 etc. Checked in RSRV everything is fine. Tried to re-promote the object from Development system. The transport also failed with the same error even though it is in unconditional mode.
Can you please suggest me what are the options.
i cannot delete the object as it is used in many cubes which is having data.
Appreciate your quick response.
Thanks,
Bhaskara Rao.

If your Prod is working fine, it should work in test too.
Did it ever worked in test after transport?
Is it possible some one tried to change something in test? If yes, you will get error when you will try to re-transport it as new transport can't find the previous structure.
You may try to activate the IO using FM RSDG_IOBJ_ACTIVATE
Edited by: ashok saha on Mar 6, 2008 8:05 PM

Error when generating program when creating CVC using infoprovider

We are receiving the message "Error when generating program" when
creating CVC using infoprovider.
This may have something to do with the fact that we added an attribute
to the infoObject 9ALOCNO. We are getting an information message if we
run a consistency check in the POS.
We had this same issue in our development system. Here, I deactivated
and then reactivated the CVCs and this resolved the problem. However,
this is not a good solution since this is also a problem in our
production system and we do not want to deactivate the POS.
is there another option to fix this problem?
Thank you,
Rumi

Hi Rumi,
i would try these:
1. Make sure the cube is active and every thing ok there
2. Run programs /SAPAPO/TS_PSTRU_CONS_CHECK on POS and /SAPAPO/TS_LCM_CONS_CHECK on planning area respectively.
3. Check the CVC creation log in transaction /n/sapapo/mc62 for more details.

Error when generating Alter Record scripts with project PPLTLS84CUR

Similar Messages

Maybe you are looking for