Error when installing Developer Suite
Hello,
In the 'Configuration Assistants' step, i got the following error when configurint "Oracle Net Configuration Assistant", so, the status is Failed.
Output generated from configuration assistant "Oracle Net Configuration Assistant" (attempt 2):
UnsatisfiedLinkError exception loading native library: oranjni10
java.lang.UnsatisfiedLinkError: jniGetOracleHome
at oracle.net.common.NetGetEnv.jniGetOracleHome(Native Method)
at oracle.net.common.NetGetEnv.getOracleHome(Unknown Source)
at oracle.net.common.NetProperties.<init>(Unknown Source)
at oracle.net.common.NetProperties.getInstance(Unknown Source)
at oracle.net.ca.CmdlineArgs.<init>(Unknown Source)
at oracle.net.ca.InitialSetup.<init>(Unknown Source)
at oracle.net.ca.NetCA.main(Unknown Source)
Exception in thread "main"
Configuration assistant "Oracle Net Configuration Assistant" failed
Why i got this?
I have already oracle database installed (10g)
Thanks
Go Net8Assistant. Follow the tree Net8Config ->Local -> Service Naming. In this node you will find all instances set (SIDs) and by clicking on them you will see in the right hand part of the screen if they were set or not in tnsnames.ora.
Another way: Usually the database service name is OracleServiceSID. Go Control Panel -> Administrative Tools -> Services and check out the Oracle Service name. Take the SID from there to tnsnames.ora.
You should have write down the name you was asked for while you were installing Oracle (or the default name that the installer put for you).
Hope this will help you
Alexandra
Similar Messages
-
hi
when i install soa suite in configuration bpel proocess manager this error show
Failed at "Could not get DeploymentManager".
i need help really.
log file:
The current status of Oracle Lite Multiuser Service:
Current State : SERVICE_RUNNING
Acceptable Control Code : (0x1) SERVICE_ACCEPT_STOP
c:\product\10.1.3.1\OracleAS_1\bpel\install\bin>mkdir "c:\product\10.1.3.1\OracleAS_1\bpel\system\database\olite"
c:\product\10.1.3.1\OracleAS_1\bpel\install\bin>del /f "c:\product\10.1.3.1\OracleAS_1\bpel\system\database\olite\orabpel.odb"
c:\product\10.1.3.1\OracleAS_1\bpel\install\bin>"c:\product\10.1.3.1\OracleAS_1\bpel\..\Mobile\Sdk\BIN\createdb.exe" orabpel "c:\product\10.1.3.1\OracleAS_1\bpel\system\database\olite\orabpel.odb" manager
Database C:\PRODUCT\10.1.3.1\ORACLEAS_1\BPEL\SYSTEM\DATABASE\OLITE\ORABPEL.odb created (VolID = 1736).
c:\product\10.1.3.1\OracleAS_1\bpel\install\bin>exit 0
Could Not Find c:\product\10.1.3.1\OracleAS_1\bpel\system\database\olite\orabpel.odb
Oracle Lite CREATEDB Version 10.2.0.2.0.
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Exit: 0
TASK: oracle.tip.install.tasks.DeployApps
Deploy applications and adapters
Port value is 6003
Buildfile: bpminstall.xml
init-midtier:
Trying to override old definition of datatype echoproperties
common_update_server.xml:
Adding shared library apache.junit ...
Adding shared library oracle.db.lite ...
Adding shared library apache.commons 10.1.3 ...
Adding shared library apache.jdom ...
Adding shared library apache.slide ...
Running batch script by:
java admin_client.jar deployer:oc4j:opmn://ALVAND:6003/home -script C:\product\10.1.3.1\OracleAS_1\bpel\system\services\install\ant-tasks/bpel_admin_client_script_sl.txt
Failed at "Could not get DeploymentManager".
This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied.
More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.
update_server.xml:
restart.container:
Stopping home container ...
opmnctl: stopping opmn managed processes...
================================================================================
opmn id=alvand:6200
no processes or applications matched this request
Restarting home container ...
opmnctl: starting opmn managed processes...
================================================================================
opmn id=alvand:6200
0 of 1 processes started.
ias-instance id=SOASuite.ALVAND
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
default_group/home/default_group/
Error
--> Process (index=1,uid=2066155171,pid=2968)
failed to start a managed process after the maximum retry limit
Log:
c:\product\10.1.3.1\OracleAS_1\opmn\logs\\default_group~home~default_group~1.log
init-midtier:
Setting up the dehydration store [olite]...
dehydrationStore:
Configuring data sources for olite dehydration store ...
Deploying ORABPEL Applications...
deploy-applications:
Deploying Oracle BPEL Process Manager ...
Copying 1 file to C:\product\10.1.3.1\OracleAS_1\bpel\system\services\lib
Copying 1 file to C:\product\10.1.3.1\OracleAS_1\bpel\system\services\lib
Copying 1 file to C:\product\10.1.3.1\OracleAS_1\bpel\system\services\lib
Updating jar: C:\product\10.1.3.1\OracleAS_1\bpel\system\services\lib\orabpel.ear
Running batch script by:
java admin_client.jar deployer:oc4j:opmn://ALVAND:6003/home -script C:\product\10.1.3.1\OracleAS_1\bpel\system\services\install\ant-tasks/bpel_deployapps.txt
Failed at "Could not get DeploymentManager".
This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied.
More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.hi
thanks
this is my opmn.xml
<?xml version="1.0" encoding="UTF-8" ?>
- <opmn xmlns="http://www.oracle.com/ias-instance">
<log path="$ORACLE_HOME\opmn\logs\opmn.log" comp="internal;ons;pm" rotation-size="1500000" />
<debug path="$ORACLE_HOME\opmn\logs\opmn.dbg" comp="internal" rotation-size="1500000" />
- <notification-server>
<port local="6100" remote="6200" request="6003" />
<ssl enabled="true" wallet-file="$ORACLE_HOME\opmn\conf\ssl.wlt\default" />
</notification-server>
- <process-manager>
- <process-modules>
- <module path="$ORACLE_HOME\opmn\lib\libopmnohs">
<module-id id="OHS" />
</module>
- <module path="$ORACLE_HOME\opmn\lib\libopmnoc4j">
<module-id id="OC4J" />
</module>
- <module path="$ORACLE_HOME\opmn\lib\libopmncustom">
<module-id id="CUSTOM" />
</module>
- <module path="$ORACLE_HOME\opmn\lib\libopmniaspt">
<module-id id="IASPT" />
</module>
</process-modules>
- <ias-instance id="SOASuite.ALVAND" name="SOASuite.ALVAND">
- <environment>
<variable id="TMP" value="C:\DOCUME~1\Ali\LOCALS~1\Temp" />
</environment>
- <module-data>
- <category id="start-parameters">
<data id="routing-id" value="g_rt_id" />
</category>
</module-data>
- <ias-component id="IASPT" status="disabled">
- <environment>
<variable id="LD_LIBRARY_PATH" value="c:\product\10.1.3.1\OracleAS_1/lib" append="true" />
</environment>
- <process-type id="IASPT" module-id="IASPT" working-dir="c:\product\10.1.3.1\OracleAS_1/iaspt/bin">
<port id="ajp" range="7501-7600" />
<process-set id="IASPT" numprocs="1" />
</process-type>
</ias-component>
- <ias-component id="ASG" status="enabled" id-matching="true">
- <process-type id="ASG" module-id="CUSTOM">
- <environment>
<variable id="OS" value="Windows_NT" />
</environment>
<start timeout="600" />
<stop timeout="120" />
- <process-set id="ASG" numprocs="1">
- <module-data>
- <category id="start-parameters">
<data id="start-executable" value="c:\product\10.1.3.1\OracleAS_1\jdk\bin\java" />
<data id="start-args" value="-ms20m -Djava.library.path=c:\product\10.1.3.1\OracleAS_1\bin;c:\product\10.1.3.1\OracleAS_1\dsa\bin;c:\product\10.1.3.1\OracleAS_1\oui\lib\win32 -classpath c:\product\10.1.3.1\OracleAS_1\dsa\jlib;c:\product\10.1.3.1\OracleAS_1\dsa\jlib\duf.jar;c:\product\10.1.3.1\OracleAS_1\lib\dms.jar;c:\product\10.1.3.1\OracleAS_1\oui\jlib\OraInstaller.jar;c:\product\10.1.3.1\OracleAS_1\jlib\srvm.jar;c:\product\10.1.3.1\OracleAS_1\jlib\netcfg.jar;c:\product\10.1.3.1\OracleAS_1\lib\xmlparserv2.jar;c:\product\10.1.3.1\OracleAS_1\assistants\jlib\assistantsCommon.jar;c:\product\10.1.3.1\OracleAS_1\jdbc\lib\classes12.zip;c:\product\10.1.3.1\OracleAS_1\jdbc\lib\nls_charset12.zip;c:\product\10.1.3.1\OracleAS_1\jlib\share.jar;c:\product\10.1.3.1\OracleAS_1\opmn\lib\optic.jar;c:\product\10.1.3.1\OracleAS_1\j2ee\home\jazn.jar;c:\product\10.1.3.1\OracleAS_1\jlib\ldapjclnt10.jar oracle.duf.dufserver.DufServer c:\product\10.1.3.1\OracleAS_1\dsa\dsa.conf" />
</category>
</module-data>
</process-set>
</process-type>
</ias-component>
- <ias-component id="default_group">
- <process-type id="home" module-id="OC4J" status="enabled">
- <module-data>
- <category id="start-parameters">
<data id="java-options" value="-Xrs -server -XX:MaxPermSize=128M -ms512M -mx1024M -XX:AppendRatio=3 -Djava.security.policy=$ORACLE_HOME/j2ee/home/config/java2.policy -Djava.awt.headless=true -Dhttp.webdir.enable=false -Doraesb.home=c:\product\10.1.3.1\OracleAS_1\integration\esb -Dhttp.proxySet=false" />
</category>
- <category id="stop-parameters">
<data id="java-options" value="-Djava.security.policy=$ORACLE_HOME/j2ee/home/config/java2.policy -Djava.awt.headless=true -Dhttp.webdir.enable=false" />
</category>
</module-data>
<start timeout="600" retry="2" />
<stop timeout="120" />
<restart timeout="720" retry="2" />
<port id="default-web-site" range="8888" protocol="http" />
<port id="rmi" range="12401-12500" />
<port id="rmis" range="12701-12800" />
<port id="jms" range="12601-12700" />
<process-set id="default_group" numprocs="1" />
</process-type>
</ias-component>
</ias-instance>
</process-manager>
</opmn> -
Script error when installing creative suite 4
I've been trying to work this one out for days.
I uninstalled the creative suite to see if it would help download dreamweaver(I've since given up on dreamweaver for the time being). So when I tried to re-install creative suite an error message popped up right after the components page when I click next.
Internet Explorer Script Error
An error has occured in the script on this page
Line: 1879
Char: 2
Error: 'id' is null or not an object
Code: 0
URL: file:///C:/program%20files/common%20files/adobe/installers/1e3ba55b33b1e8227645fbac82acca 3/resources/common/scripts/utils.js
Do you want to continue running scripts on this page?
Yes/No
It makes no difference whether I click yes or no. On the next page it freezes at 'preparing to install'. This has happened everytime.
Urgent help needed!Hi dear Experts,
I URGENTLY need your HELP!
I got the same script error message and don't know how to solve it ....after 3 days of searching and trying.
Due to a system crash I reinstalled the same Win7x64 Ultimate (=> clean image, incl. SP1 and all updates, drivers etc) on the completely same computer hardware. But still the same package CS4 Design Premium refuses to get reinstalled again.
BUT, I can not install CS4 Design Premium (Western Version), even though I have the original CD’s. It shows after checking the system profile and let me enter the license code and choose the software component to be installed, suddenly a window pops up saying exactly the message of above. I also tried to install as test version....
An error has occured in the script on this page
Line: 1879
Do I want to continue run this script? (yes/no)
Either way, the system starts with the next screen, but stops working at all. Nothing happens.
So I downloaded the files from
http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
and tried the same with the download. After unpacking to a temp file and starting “SETUP.EXE” the system does a system profile check for about 75% and then stops …simply does not do anything anymore.….for ages. Ok, another trial brought me further but only to the script error.
Note: any other Software including Adobe software, like: Lightroom 3, PS Elements 9, Acrobat Reader …. etc do not have any problems with installation.
What did I do to help myself:
- I tried again recopy the clean Win7x64 boot image and tried again... same result
- used the cleaner tools http://www.adobe.com/support/contact/cs4clean.html , but actually it does not offer the cleaning tool for CS4 but for CS6, but still I managed it successfully, no impact on the installation process of CS4
- I deinstalled any other adobe products, including Flash player, shockwave player , air, Reader, ...what ever Adobe was the product I deinstalled .... no impact
- I tried to install the package in Windows protected mode => does not even start the installation.
- I tried a new user (administrator rights) and .... same ****
Does anyone has an idea how to solve this problem?
... and no, to buy an upgrade is not an option for me.... then I take the hard way and change to CorelDraw Graphics Suite. I paid my full license and the CS4 is doing what I need. It is already very hard to swallow that CS4 is not support the very young CS4 (and I don't mean improvement, just to keep investment alive) ... So no option!
Hardware:
ASUS mainboard, Intel Pentium D90, RAM 8GB, Sapphire HD6950 Radeo AMD Graphic Card, ...but nothing has change since previous working installation.
I appreciate any help and thank you in advance for looking into this.
Best regards
Georg -
DB Version Error when install SOA Suite using with DB 10G 10.2.0.1
Hi,
I am trying to install SOA Suite 10.1.3.1.0 in Windows XP environment where an Oracle 10g database 10.2.0.1 is pre-installed. When I try to use Advanced Installation, the system says that my database version should be 10.2.0.2 or higher. I couldn't find any 10.2.0.2 version or higher for Windows XP on Oracle download site. There is only 10.2.0.3 for Windows Vista. Anyone knows whether there is a workaround?
Thanks in advance,
JeffHi, I met this problem some weeks early. I wrote a conlusion about this:
Update Oracle Database 10.2.0.1 to 10.2.0.2 on Windows XP
When I install Oracle SOA Suite 10g Release 3(10.1.3.x, soa_windows_x86_101310_disk1.zip download from http://www.oracle.com/technology/software/tech/soa/index.html), a error occured. Because the version of Oracle Database on my laptop is 10g Release 2 (10.2.0.1). Then I download the update patch p4547817_10202_WINNT.zip from metalink.oracle.com and install the database without installing the starter database and instance (orcl). After this, use p4547817_10202_WINNT.zip to updata Oracle Database 10.2.0.1 to 10.2.0.2 and then use DBCA to install a new database and instance (orcl).
Summary:
1. patch: p4547817_10202_WINNT.zip downloaded from metalink.oracle.com
2. only install Oracle database software, don't install any database or instance
3. use p4547817_10202_WINNT.zip to update the database software
4. use DBCA to install a new database
Question:
1. how to update when there already exist data in database?
2. Oracle database express edition isn't stabile enough? Because there are always some error appear during SOA Order Booking demo using. -
Installing Developer Suite 10g for Windows
As part of a prototype test for upgrading to 10g we have installed Oracle 9i database onto a Windows XP PC and are now trying to install the developer suite 10g.
The ORACLE_HOME directory for the DB is D:\Oracle\ora92.
The Oracle Uinversal Installer defaults to this directory for Oracle Home when we try to install the 10g software, but we then get the following error:
Dependencies
Oracle Developer SUite 10g cannot be installed into an existing Oracle 9i 9.2.0.1.0 or higher Oracle Home.
Could you advise please.Yes, and got the message - install has encountered an error while attempting to verify your virtual memory settings....
We have changed the paging size for the D: drive where we were trying to load to - and it has loaded OK now thanks. -
Problem Installing Developer Suite on WIndows Vista
Hi! i'm a student of computer science, and i need to install developer suite for a proyect i need to do for one of my classes.
I have a problem installing developer suit on Windows Vista. After i download and unzip both disk, i run the setup from the installer folder and i get an alert that says: "abnormal termination. There's been an internal error. Send the following files to the Oracle Suport Services: Unknown, Unknow, Unknow". I've also tryed with the setup from the main folder and i get the same alert. I don't know what to do, i've tryed setting the compatibility mode to windows XP, runnig as administrator, changing the performance configuration of my computer and nothing. Please help me to install the program!Which developer suite are you using???
-
Getting an "installer failed to initialize" error when installing CS5 from CD
Getting an "installer failed to initialize" error when installing CS5 from CD
Mac OS X Version 10.7.5Try using the Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html
If you continue to have problems getting the CD installation to work you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
CS5:
http://prodesigntools.com/all-adobe-cs5-direct-download-links.html -
I keep getting an error when installing some apps - unknown error (0xE8000013)
Anyone know what this is or why this is happening???
any help apreciatedleefilmer,
Have you tried the steps in article http://support.apple.com/kb/TS1702 ? Reporting the problem to the particular application developer may be helpful, since it seems to be occurring with some apps.
Oddly, the article I found documenting the error doesn't seem related to the issue you're experiencing: http://support.apple.com/kb/TS1266. Do you have a SIM PIN on your iPhone by chance?
Other than that, have you tried restoring your iPhone and setting it up as a new phone? More information can be found here: http://support.apple.com/kb/HT1414 .
Hope this helps,
Raleigh -
Mount error when installing xcode 3 and iOS 4
Hi,
I ran into mount error when installing xcode 3.2.6 and iOS 4.3 downloaded from https://developer.apple.com/devcenter/download.action?path=/Developer_Tools/xcod e_3.2.6_and_ios_sdk_4.3__final/xcode_3.2.6_and_ios_sdk_4.3.dmg.
I work on Mac mini with Mac OS X 10.6.
Could anyone help? Thanks!
Regards,
EmilyHi Ken,
Thanks for your advice! I would try to clean up for more free space. I just downloaded one dmg from another website linking to apple. I could successfully install that one, but very often the content in gdb window is empty. Even if the gdb works for some time initially, after loading some specific project, the gdb doesn't provide info any longer :-( Any idea?
It might be the best season in Shenzhen now. It is sunny, but not hot, with temperature from 25 degree centigrade to 30.
Regards,
Emily -
Errors when installing Photoshop CS6
Errors when installing Photoshop CS6
I am having a similar issue trying to download PS via CC.
Mac OSX
Here are the details from the installation error:
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DS001 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 13 error(s)
----------- Payload: Camera Profiles Installer 7.0.0.0 {539AEF15-3A2B-4A31-A587-7E90F7D9C700} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeCameraRawProfile7.0All/AdobeCameraRawProfile7.0All.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe Player for Embedding 3.3 3.3.0.0 {2591B843-8028-4395-9DEE-03AF8D631539} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeAPE3.3-mul/AdobeAPE3.3-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: PDF Settings CS5 10.0.0.0 {84901376-1C55-4BD3-AD2C-F9BDB4449DAC} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobePDFSettings10-mul/AdobePDFSettings10-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe SwitchBoard 2.0 2.0.0.0 {4FFA83C0-007A-4DB3-955C-B5EEE73BEDAF} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/SwitchBoard2.0All/SwitchBoard2.0All.dmg. Please verify that the disk image is not corrupt.
----------- Payload: AdobeCMaps CS6 4.0.0.0 {E8B1DAAA-0B6B-44E6-A2D3-8E418EA0EA85} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeCMaps4-mul/AdobeCMaps4-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Suite Shared Configuration CS6 3.0.0.0 {0256558F-A0FF-4FCF-99C2-96D2EE3201D9} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeSuiteSharedConfiguration3-mul/AdobeSuiteSharedConfiguration3-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe Utilities CS6 4.0.0.0 {4F427880-01EA-4E0F-AAE2-9ADE97563A21} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeUtilities4.0-mul/AdobeUtilities4.0-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe XMP Panels 4.0.0.0 {148542D8-49CA-482A-A334-1D54C5A9D53B} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeXMPPanelsAll/AdobeXMPPanelsAll.dmg. Please verify that the disk image is not corrupt.
----------- Payload: AdobePDFL CS6 10.9.0.0 {557F9FD3-EED8-43D7-AF29-0F19CA832728} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobePDFL10.9-mul/AdobePDFL10.9-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: AdobeTypeSupport CS6 11.0.0.0 {A0F72081-99FB-4FFA-AE1A-62B5A656CAC1} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeTypeSupport11-mul/AdobeTypeSupport11-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Photoshop Camera Raw 7 7.0.0.0 {CFC3110A-491C-4DBF-A97D-66C567600A2F} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeCameraRaw7.0All/AdobeCameraRaw7.0All.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe Photoshop CS6 Support 13.0.0.0 {1F955A4A-F365-4379-AEE2-B7C83E1AA883} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobePhotoshop13-Support/AdobePhotoshop13-Support.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe Photoshop CS6 Driver 13.0.0.0 {74EB3499-8B95-4B5C-96EB-7B342F3FD0C6} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobePhotoshop13-Driver/AdobePhotoshop13-Driver.dmg. Please verify that the disk image is not corrupt. -
Rapidwiz - libXtst.so.6 error when installing EBS R12 on Oracle Linux 6.3
Hello All,
I am getting libXtst.so.6 error when installing EBS R12 on Oracle Linux 6.3
I could not find the exact file to download. Can anyone of you help me to the proper location.
Thanks in advance.987696 wrote:
Hello All,
I am getting libXtst.so.6 error when installing EBS R12 on Oracle Linux 6.3
I could not find the exact file to download. Can anyone of you help me to the proper location.
Thanks in advance.Please see these docs -- Search for "libXtst.so.6".
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86 [ID 761564.1]
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 [ID 761566.1]
Oracle Forms Upgrade to 10.1.2.3 fails with error /usr/lib/libXtst.so.6: undefined reference [ID 1120527.1]
Thanks,
Hussein -
Install problem when installing Creative Suite 6 Master collection?
Has anybody had this problem when installing Creative suite 6 Master Collection? It says: The product you are trying to install in not an Adobe Genuine Software and appears to be counterfeit. I have received the product directly from Adobe. It will validate it then start to install then stop and give me the above error. Help.
If you are still experiencing difficulties please try copying the install files from the DVD to your desktop and try installing from there. The error still indicates that the installation files have become compromised. If you are installing from the DVD this could indicate either a problem with the media or your optical drive.
-
Cannot install developer suite
Hello,
I have Oracle 10g installed at my PC. This installation was done successfully. Yesterday I downloaded the developer suite 10g because I want to write some GUI with forms. When I start the universal installer and in the dialog box (specify paths - something like that) I push on the button next but nothing happens. Can someone help me with this problem so I can install developer suite on my PC.Specify a new home and path before pushing the Next button.
-
Installing developer suite on ubuntu 8.04
Hi,
I'm using Ubuntu since a couple of months now and i'am very happy of it.
I want to install developer suite 10gr2 on ubuntu. Of course I can do that with an xp virtualization.
But as the XE database is also available for ubuntu, with explanations for installation http://www.oracle.com/technology/tech/linux/install/xe-on-kubuntu.html I want to do the same with forms builder.
Is there a tutorial for that ? is it even possible?
Thanks for sharing your experience.
Regards
Jean-YvesHI,
According to the certification matrix
https://metalink.oracle.com/metalink/plsql/f?p=140:1:9614243620221198550:::::
the Linux Ubuntu does not seem to be certified with DevSuite10g....
Sim -
Error when install Infrastructure 10g 10.1.2 in Windows2000 server
My environment:
RDBMS Version: 10.1.0.3.1
Operating System and Version: Windows2000 SP4
Product (i.e., OAS, IAS, etc): 10g AS Release 2
Product Version: 10.1.2
JDK Version: 1.4
I have the folowing error when installing the Infrastructure (in the stage of SSO Configure Assistant):
Default Subscriber GUID: E0575BDE015C411CAD99BDEF85F79029
Subscriber Naming attribute: dc
Default Subscriber Name: server01
*** Resetting user DN and GUID information ...***
Done....
PL/SQL procedure successfully completed.
No errors.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.3.1 - Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
NLS_LANG character set = WE8MSWIN1252
NLS_LANG param = AMERICAN_AMERICA.WE8MSWIN1252
ERROR : Exception while configing SSO DAD :
oracle.ias.repository.schema.SchemaException: Unable to establish connection to the Oracle Internet Directory Server ldap://myserver.domain.com:3060/. Base Exception : javax.naming.CommunicationException: Request: 1 cancelled
at oracle.ias.repository.directory.DirectoryReader.connect(DirectoryReader.java:124)
at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:523)
Please advice.
Thanks
TrungI don't know much about the 10g Releases yet but I had the same error with 9.0.2.3. The problem is that OID isn't available when it needs to be.
When you get the error, start OID using the command line then try running the config assistant again.
Hope this helps
Alex
Maybe you are looking for
-
Cap 4 Installation Problem On Vista Machine
I'm having difficulty with a particular Windows Vista machine. I have two machines that are almost identical - both Gateways with Windows Vista Enterprise 32-bit OS, both 2 GB of memory. One has only one hard drive while the other has 2 physical dirv
-
Error in Using the RPC WSDL based Business service
Hi, I am using OSB 11g. I have created a business service with one of the WSDL which supports rpc/literal style. I am trying to call this business service using the service callout. For the service callout if i use Configure SOAP Body option, i am ge
-
Sharing Data & Printer Through Airport Extreem
My daughter is home for the summer and we are trying to get her MacBook working with the other computer in the house. WIFI -- no problem. She is set up and going Printer -- Half way there! We have a HP LaserJet P2015d printer plugged into the airport
-
How do I open a PDF file with Adobe Reader if it is in iBooks
I have a number of PDF files in my iBooks library. I just downloaded Adobe Reader for the iPad. I can't see how I can open those PDF files. The only thing I seem to be able to do with them is to open them from iBooks directly. Doing that does not
-
Is it ok to install Report developer suite on the same machine?
Hello All, Recently I have upgraded my Oracle Forms 5.0 to Form 6i. Now I want same process with my reports. Our current reports version is 3.1. 1) Is it possible to upgrdae report 3.1 to report 6i? 2) I have installed my form 6i developer suite in w