Error when loading from External Tables in OWB 11g
Hi,
I face a strange problem while loading data from flat file into the External Tables.
ORA-12899: value too large for column EXPIRED (actual: 4, maximum: 1)
error processing column EXPIRED in row 9680 for datafile <data file location>/filename.dat
In a total of 9771 records nearly 70 records are rejected due to the above mentioned error. The column (EXPIRED) where the error being reported doesn't have value greater than 1 at all. I suspect it to be a different problem.
Example: One such record that got rejected is as follows:
C|234|Littérature commentée|*N*|2354|123
highlightened in Bold is the EXPIRED Column.
When I tried to insert this record into the External Table using UTL_FILE Utility it got loaded successfully. But when I try with the file already existing in the file directory it again fails with the above error, and I would like to mention that all the records which have been loaded are not Ok, please have a look at the DESCRIPTION Column which is highlightened. The original information in the data file looks like:
C|325|*Revue Générale*|N|2445|132
In the External Table the Description Value is replaced by the inverted '?' as follows:
Reue G¿rale
Please help.
Thanks,
JL.
user1130292 wrote:
Hi,
I face a strange problem while loading data from flat file into the External Tables.
ORA-12899: value too large for column EXPIRED (actual: 4, maximum: 1)
error processing column EXPIRED in row 9680 for datafile <data file location>/filename.dat
In a total of 9771 records nearly 70 records are rejected due to the above mentioned error. The column (EXPIRED) where the error being reported doesn't have value greater than 1 at all. I suspect it to be a different problem.
Example: One such record that got rejected is as follows:
C|234|Littérature commentée|*N*|2354|123
highlightened in Bold is the EXPIRED Column.
When I tried to insert this record into the External Table using UTL_FILE Utility it got loaded successfully. But when I try with the file already existing in the file directory it again fails with the above error, and I would like to mention that all the records which have been loaded are not Ok, please have a look at the DESCRIPTION Column which is highlightened. The original information in the data file looks like:
C|325|*Revue Générale*|N|2445|132
In the External Table the Description Value is replaced by the inverted '?' as follows:
Reue G¿rale
Please help.
Thanks,
JL.sorry, couldnt see the highlighted test.could you plesae enclsoe it in tags
also post the table definition with attributes. BTW..Whats your NLS_LANGUAGE SET TO?
Similar Messages
-
Importing Users from external table in obiee 11g
Hi Every one,
Do any one help me giving suggestions that how we can import users from external table.
I am using obiee 11.1.1.6.
In that external table Which i am using there are 56K users.
They are able to login to obiee analytics.
But for setting object level security I need to make diffrent groups with these users to assign the dashbords and required objects in front end.
But how can we get all these users into BI server or presentation server to make them into groups.
Thanks in advance.
Edited by: 861096 on Mar 13, 2012 8:44 AMHi,
or if your lowest level is the same like
Day->month->year->Total
Day->businessMonth->businessyear->Total
Then yes, it is.
Create the first, then you start to create the second by adding your top(business year) level on the same level as the one you have (year) both under your total.
Then when you would add your second base level, there is a special option for it, something like use other hierarchy level/shared level (sorry can't recall and does not have a connection right now) then you select your existing day level under your businessmonth level.
Hope this helps,
Regards,
D -
Error:loading from external table to database table
hi,
Following error comes while inserting data from external to new_ext table
what might be the reason??
error and external table creation script is as follows
regards,
Avinash
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEFETCH callout
ORA-29400: data cartridge error
KUP-04020: found record longer than buffer size supported, 524288, in
/home/oracle/rgtr1.txt
ORA-06512: at " SYS.ORACLE_LOADER", line 14
ORA-06512: at line 1
ORA-06512: at "PRODNDBA.PROC_RGTR1", line 513
ORA-06512: at line 1
external table script is as follows:
DROP
TABLE EXT_TABLE_RGTR1 CASCADE CONSTRAINTS;
CREATE
TABLE EXT_TABLE_RGTR1
ID
VARCHAR2(10 BYTE),
PC
VARCHAR2(2 BYTE),
BU
VARCHAR2(4 BYTE),
CONSUMER_NO
VARCHAR2(12 BYTE),
CUR_READING1
NUMBER,
CUR_READING2
NUMBER,
ADJ_CONS1
NUMBER,
ADJ_CONS2
NUMBER,
TOT_EC
NUMBER,
TOT_FCA
NUMBER,
TOT_ED
NUMBER,
ADDLESS_AMT
NUMBER,
NETBILL_AMT
NUMBER,
ADJ_UNIT1
NUMBER,
ADJ_UNIT2
NUMBER,
TARIFF_CODE
NUMBER,
DUTY_CODE
NUMBER,
DISCONN_TAG
VARCHAR2(1 BYTE),
MIN_CHRG_IND
VARCHAR2(1 BYTE),
OC_CODE1
VARCHAR2(1 BYTE),
OC_CODE2
VARCHAR2(1 BYTE),
OC_AMT1
NUMBER,
OC_AMT2
NUMBER,
PREV_DPC
NUMBER,
CREDIT_AVG_BILL
NUMBER,
ADJ_TYPES
NUMBER,
ADJ_EC_FCA
NUMBER,
ADJ_ED
NUMBER,
ADJ_AMT1
NUMBER,
ADJ_AMT2
NUMBER,
ADJ_AMT3
NUMBER,
ADJ_AMT4
NUMBER,
ADJ_AMT5
NUMBER,
ADJ_AMT6
NUMBER,
ADJ_AMT7
NUMBER,
ADJ_AMT8
NUMBER,
MR_CYCLE
VARCHAR2(2 BYTE),
NOTICE
VARCHAR2(2 BYTE),
INSTAL_IND
VARCHAR2(1 BYTE),
LAST_RCPT_DT
VARCHAR2(6 BYTE),
MS1
NUMBER,
MS2
NUMBER,
ARR_PL_CR
NUMBER,
PREV_READ1
NUMBER,
PREV_READ2
NUMBER,
OLD_CONS_NUM
VARCHAR2(16 BYTE),
MTR_CODE1
VARCHAR2(2 BYTE),
MTR_CODE2
VARCHAR2(2 BYTE),
ABR_EC1
NUMBER,
ABR_FCA1
NUMBER,
REV_CAT
VARCHAR2(2 BYTE),
BILL_DT
DATE,
SD_PAID
NUMBER,
SD_ARRS
NUMBER,
SD_ADDL
NUMBER,
PR_RDNG_IND1
VARCHAR2(1 BYTE),
PR_RDNG_IND2
VARCHAR2(1 BYTE),
NAB_IND
VARCHAR2(1 BYTE),
CONN_LOAD
NUMBER,
OLDEST_OS_DT
VARCHAR2(4 BYTE),
ABR_RECAMT1
NUMBER,
METER_RENT
NUMBER,
EX_DUTY
NUMBER,
TDL_CHARGES
NUMBER,
ABR_MTH
VARCHAR2(4 BYTE),
READING_IND
VARCHAR2(1 BYTE),
FB_IND
VARCHAR2(1 BYTE),
ADJ_AMT
NUMBER,
MTR_NUM1
NUMBER,
MTR_NUM2
NUMBER,
AVG_UNITS1
NUMBER,
AVG_UNITS2
NUMBER,
MIN_BILL_AMT
NUMBER,
METER_COST_DEMANDED
NUMBER,
MF1
VARCHAR2(2 BYTE),
MF2
VARCHAR2(2 BYTE),
MR
VARCHAR2(2 BYTE),
ROUTE
VARCHAR2(4 BYTE),
SEQ
VARCHAR2(4 BYTE),
DISC_IND
VARCHAR2(1 BYTE),
FREEZE_CODE
VARCHAR2(1 BYTE),
MTH40
NUMBER,
CONCES_EC
NUMBER,
METER_COST_ARREARS
NUMBER,
METER_COST_PAID
NUMBER,
SANCTION_LOAD
NUMBER,
PENALTY_ON_CL
NUMBER,
CL_SLB
NUMBER,
UNTSLB
NUMBER,
CAPACIT_PENALTY
NUMBER,
ARREARS_OF_INT
NUMBER,
INT_ON_ARREARS
NUMBER,
FIXED_CHARGES
NUMBER,
ASSESSED_DPC
NUMBER,
FCA_UNT_OLD
NUMBER,
FCA_UNT_NEW
NUMBER,
DEFECT_RDN1
NUMBER,
DEFECT_RDN2
NUMBER,
CAP_CT_RENT
NUMBER,
CT_RENT
NUMBER,
ADV_BILL_IND
VARCHAR2(1 BYTE),
ADV_BILL_RD_IND
VARCHAR2(1 BYTE),
INST_IND
VARCHAR2(1 BYTE),
CONSCUR_STATUS
VARCHAR2(1 BYTE),
MTR_COST1
NUMBER,
MTR_COST2
NUMBER,
MTR_COST3
NUMBER,
LOOM_NOS
NUMBER,
CONS_OLD_TARIFF
NUMBER,
CONS_NEW_TARIFF
NUMBER,
PD_TD_DATE
VARCHAR2(6 BYTE),
ED5
VARCHAR2(10 BYTE),
ED6
VARCHAR2(10 BYTE),
ED8
VARCHAR2(10 BYTE),
B66_AMT1
NUMBER,
BILL_MTH
VARCHAR2(6 BYTE),
STD_MTH
NUMBER,
PREV_RD_MTH
VARCHAR2(4 BYTE),
ACCT_HD_TRF
VARCHAR2(2 BYTE),
ADM_CODE
NUMBER,
BILL_DUE_DATE
DATE,
EC_DUTY
NUMBER,
ABNOR_IND
VARCHAR2(1 BYTE),
TRF04_CONN_LOAD
NUMBER,
PROCESS_DT
DATE,
SUPPLY_DATE
VARCHAR2(6 BYTE),
BILL_DT_FROM
DATE,
RECEIPT_AMT
NUMBER,
LOCKED_CR_UNITS
NUMBER,
LOCKED_CHARGES
NUMBER,
LOCKED_ED
NUMBER,
LOCKED_FCA
NUMBER,
LOCKED_FC
NUMBER,
LOCKED_RLCHARGES
NUMBER,
LOCKED_CL
NUMBER,
LOCKED_ECEDFIX
NUMBER,
LOCKED_ACC_MONTH
NUMBER,
AVG_OLD_CONSMP
NUMBER(6),
AVG_SINCE
VARCHAR2(4 BYTE),
AVG_OCCURANCES
NUMBER(2),
AVG_MA_IND
VARCHAR2(1 BYTE),
MTR1_PHASE
NUMBER(1),
MTR_PHASE1
VARCHAR2(1 BYTE),
MTR2_PHASE
NUMBER(1),
IND_CAT
VARCHAR2(1 BYTE),
L61_TARIFF
NUMBER(2),
MTR_CHG_AMT1
NUMBER(12),
NO_OF_MONTHS
NUMBER,
MTR_CHG_AMT2
NUMBER(12),
B66_AMT
NUMBER(10),
ADJ_AMT11
NUMBER,
B66_ADJ_TYP
VARCHAR2(1 BYTE),
B60_AMT
NUMBER(10),
ADJ_AMT13
NUMBER,
B60_ADJ_TYP
VARCHAR2(1 BYTE),
CPF_NO
NUMBER(8),
ADJ1
NUMBER(9),
ADJ2
NUMBER(9),
ADJ3
NUMBER(9),
ADJ4
NUMBER(9),
ADJ5
NUMBER(9),
ADJ6
NUMBER(9),
ADJ7
NUMBER(9),
ADJ8
NUMBER(9),
ADJ11
NUMBER(9),
ADJ13
NUMBER(9),
DTC_CODE
VARCHAR2(7 BYTE),
TITLE
VARCHAR2(8 BYTE),
NAME
VARCHAR2(36 BYTE),
ADDRESS1
VARCHAR2(26 BYTE),
ADDRESS2
VARCHAR2(26 BYTE),
VILLAGE
VARCHAR2(14 BYTE),
PIN
VARCHAR2(6 BYTE),
LOCK_SINCE
VARCHAR2(4 BYTE),
FAULTY_SINCE
VARCHAR2(4 BYTE),
MTR_DIGIT1
VARCHAR2(1 BYTE),
MTR_DIGIT2
VARCHAR2(1 BYTE),
FCA_PAISE
NUMBER(9),
GTY_EXP_DT
VARCHAR2(6 BYTE),
REJ_READ_MTR1
NUMBER(6),
REJ_READ_MTR2
NUMBER(6),
REJ_ADJ_UNITS1
NUMBER(6),
REJ_CONSMP
NUMBER(6),
OWNER_CODE
NUMBER(1),
MTR_CAP_AMP
NUMBER(1),
MTR_A
VARCHAR2(1 BYTE),
MTR_C
VARCHAR2(1 BYTE),
MTR_D
VARCHAR2(1 BYTE),
MTR_E
VARCHAR2(1 BYTE),
CUT_OF_DT
DATE,
POLE
VARCHAR2(6 BYTE),
EDRATE
NUMBER(9),
AREA
VARCHAR2(1 BYTE),
MTR_BRAND1
VARCHAR2(2 BYTE),
MTR_BRAND2
VARCHAR2(2 BYTE),
LC1
NUMBER(3),
POWER_CUT_IND
VARCHAR2(1 BYTE),
SERVICE_DT
DATE,
ADJ_UNIT11
NUMBER,
ADJ_UNIT22
NUMBER,
RECEIPT_AMT1
NUMBER,
MTR1
NUMBER,
STRK_BLL_AMT
NUMBER,
DUTY_UNTS1
NUMBER,
DUTY_AMT1
NUMBER,
DUTY_UNTS2
NUMBER,
DUTY_AMT2
NUMBER,
DUTY_UNTS3
NUMBER,
DUTY_AMT3
NUMBER,
ADJ_UNIT_45
NUMBER,
ADV_BIL_EC
NUMBER,
NEW_DUTY_RATE
NUMBER,
NEW_DUTY_UNTS
NUMBER,
NEW_DUTY_AMT
NUMBER,
DPC_PAB
NUMBER,
MS9_SINCE
VARCHAR2(4 BYTE),
DISTRICT_CODE
NUMBER(2),
TAX_ON_SALE
NUMBER,
LOCKED_CHARGES_TSE
NUMBER
ORGANIZATION
EXTERNAL
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY EXT_DIR
ACCESS PARAMETERS
( records delimited by newline
badfile
'ext.bad'
logfile 'ext.log'
fields
ID POSITION
(1-4),
PC POSITION
(7-7),
BU POSITION
(8-11),
CONSUMER_NO POSITION
(18-29 ),
CUR_READING1 POSITION
(33-41 ),
CUR_READING2 POSITION
(42-50 ),
ADJ_CONS1 POSITION
(51-59 ),
ADJ_CONS2 POSITION
(60-68 ),
TOT_EC POSITION
(69-86),
TOT_FCA POSITION
(87-104 ),
TOT_ED POSITION
(105-122 ),
ADDLESS_AMT POSITION
(123-140 ),
NETBILL_AMT POSITION
(141-158 ),
ADJ_UNIT1 POSITION
(159-167 ),
ADJ_UNIT2 POSITION
(168-176 ),
TARIFF_CODE POSITION
(177-178 ),
DUTY_CODE POSITION
(179-180 ),
DISCONN_TAG POSITION
(181-181 ),
MIN_CHRG_IND POSITION
(182-182 ),
OC_CODE1 POSITION
(183-183 ),
OC_CODE2 POSITION
(184-184 ),
OC_AMT1 POSITION
(185-202 ),
OC_AMT2 POSITION
(203-220 ),
PREV_DPC POSITION
(221-238 ),
CREDIT_AVG_BILL POSITION
(239-256 ),
ADJ_TYPES POSITION
(257-264 ),
ADJ_EC_FCA POSITION
(265-282 ),
ADJ_ED POSITION
(283-300 ),
ADJ_AMT1 POSITION
(301-318 ),
ADJ_AMT2 POSITION
(319-336 ),
ADJ_AMT3 POSITION
(337-354 ),
ADJ_AMT4 POSITION
(355-372 ),
ADJ_AMT5 POSITION
(373-390 ),
ADJ_AMT6 POSITION
(391-408 ),
ADJ_AMT7 POSITION
(409-426 ),
ADJ_AMT8 POSITION
(427-444 ),
MR_CYCLE POSITION
(445-446 ),
NOTICE POSITION
(447-448 ),
INSTAL_IND POSITION
(449-449 ),
LAST_RCPT_DT POSITION
(453-458 ),
MS1 POSITION
(459-459),
MS2 POSITION
(460-460),
ARR_PL_CR POSITION
(461-478 ),
PREV_READ1 POSITION
(479-487 ),
PREV_READ2 POSITION
(488-496 ),
OLD_CONS_NUM POSITION
(497-512 ),
MTR_CODE1 POSITION
(513-514 ),
MTR_CODE2 POSITION
(515-516 ),
ABR_EC1 POSITION
(517-534 ),
ABR_FCA1 POSITION
(535-552 ),
REV_CAT POSITION
(553-554 ),
BILL_DT POSITION
(555-560 ) DATE "DDMMYY",
SD_PAID POSITION
(561-569 ),
SD_ARRS POSITION
(570-578 ),
SD_ADDL POSITION
(579-587 ),
PR_RDNG_IND1 POSITION
(588-588 ),
PR_RDNG_IND2 POSITION
(589-589 ),
NAB_IND POSITION
(590-590 ),
CONN_LOAD POSITION
(592-600 ),
OLDEST_OS_DT POSITION
(601-604 ),
ABR_RECAMT1 POSITION
(605-622 ),
METER_RENT POSITION
(623-631 ),
EX_DUTY POSITION
(632-649 ),
TDL_CHARGES POSITION
(632-649 ),
ABR_MTH POSITION
(650-651 ),
READING_IND POSITION
(652-652 ),
FB_IND POSITION
(653-653 ),
ADJ_AMT POSITION
(654-671 ),
MTR_NUM1 POSITION
(672-681 ),
MTR_NUM2 POSITION
(682-691 ),
AVG_UNITS1 POSITION
(692-700 ),
AVG_UNITS2 POSITION
(701-709 ),
MIN_BILL_AMT POSITION
(710-727 ),
METER_COST_DEMANDED POSITION
(710-727 ),
MF1 POSITION
(728-729),
MF2 POSITION
(730-731),
MR POSITION
(732-733),
ROUTE POSITION
(734-737),
SEQ POSITION
(738-741),
DISC_IND POSITION
(742-742 ),
FREEZE_CODE POSITION
(743-743 ),
MTH40 POSITION
(744-752),
CONCES_EC POSITION
(753-770 ),
METER_COST_ARREARS POSITION
(753-770 ),
METER_COST_PAID POSITION
(771-788 ),
SANCTION_LOAD POSITION
(789-797 ),
PENALTY_ON_CL POSITION
(798-815 ),
CL_SLB POSITION
(816-817 ),
UNTSLB POSITION
(818-819 ),
CAPACIT_PENALTY POSITION
(820-837 ),
ARREARS_OF_INT POSITION
(838-855 ),
INT_ON_ARREARS POSITION
(856-873 ),
FIXED_CHARGES POSITION
(874-891 ),
ASSESSED_DPC POSITION
(892-909 ),
FCA_UNT_OLD POSITION
(910-927 ),
FCA_UNT_NEW POSITION
(928-945 ),
DEFECT_RDN1 POSITION
(982-990 ),
DEFECT_RDN2 POSITION
(991-999 ),
CAP_CT_RENT POSITION
(1000-1008 ),
CT_RENT POSITION
(1009-1017 ),
ADV_BILL_IND POSITION
(1018-1018 )
LOCATION
(EXT_DIR:'rgtr1.txt')
REJECT
LIMIT UNLIMITED
LOGGING
NOCACHE
NOPARALLEL;KUP-04020: found record longer than buffer size supported, number, in string
Cause: a record in the data source was longer than the maximum data size supported. The number reported is the maximum supported size of a record.
Action: none
Examine your bad file and log files for details of the rows which failed from insertion. -
Error when Importing a External table
When I am trying to import a external table I am getting a error as SQL Exception. Any ideas as to how to fix this error.
The external table is under one schema. I have a locator in OWB pointing to that schema and I am trying to Import the external table. I am able to see this table in TOAD.
ThanksRepository Error:SQL Exception..
Class Name: CacheMediator.
Method Name: getDDEntryFromDB.
Repository Error Message: ORA-22992: cannot use LOB locators selected from remote tables
at oracle.wh.repos.pdl.foundation.CacheMediator.getSQLResult(CacheMediator.java:504)
at oracle.wh.repos.impl.CMPWBAPIFactory.getSQLResult(CMPWBAPIFactory.java:2137)
at oracle.wh.service.sdk.integrator.RepositoryUtils.getSQLResult(RepositoryUtils.java:448)
at oracle.wh.service.sdk.integrator.RepositoryUtils.getSQLResult(RepositoryUtils.java:413)
at oracle.wh.ui.integrator.oracle.WBOracleDatabaseEntityAccessor.getAccessParametersSQLResult(WBOracleDatabaseEntityAccessor.java:518)
at oracle.wh.ui.integrator.oracle.WBOracleDatabaseEntityAccessor.getAccessParameters(WBOracleDatabaseEntityAccessor.java:459)
at oracle.wh.ui.integrator.common.ImportEntityAlgorithm.importAccessParameters(ImportEntityAlgorithm.java:2724)
at oracle.wh.ui.integrator.common.ImportEntityAlgorithm.importExternalTable(ImportEntityAlgorithm.java:1499)
at oracle.wh.ui.integrator.common.ImportEntityAlgorithm.dispatchElement(ImportEntityAlgorithm.java:583)
at oracle.wh.ui.integrator.common.ImportEntityAlgorithm.importElement(ImportEntityAlgorithm.java:366)
at oracle.wh.ui.integrator.sdk.EntityAccessor.importElement(EntityAccessor.java:80)
at oracle.wh.ui.integrator.common.ImportService.importElement(ImportService.java:1046)
at oracle.wh.ui.integrator.common.wizards.ImportElementTransaction.run(ImportWizardDefinition.java:578) -
Error when loading from Flat File
I get the message below when trying to load from a flat file. The change that I made to the Transfer Structure was to move the items. How can I resolve? Thanks
Error 8 when compiling the upload program: row 227, message: Data type /BIC/CCABSMMIMH1 was found in a newer vehi Niten,
check if helps
A newer version of the data type error when loading -
Error when loading from ODS to Cube
Hello Friends,
I am having trouble loading data from ODS to Infocube in my 2004S system.When loading data i get this message
07/03/2007 13:10:25 Data target 'ODSXYZ ' removed from list of loadable targets; not loadable.
07/03/2007 13:28:42 Data target 'ODSXYZ ' is not active or is incorrect; no loading allowed
I checked for ODSXYZ in my data target but there is nothing by that name.Even the infopackage doesnt have it.What needs to be done.Please help.
Thanks.Its a expected behavior. When you migrate ur DS, the infopacks associated with it, will grey out all the data targets that they were feeding before, that applies to any infopack you create even after the migration. You womt be able to delete it.
Having said this, this shouldnt impact ur loads from ODS to Cube. As this shoudl be taken care of by ur DTP's rather than ur infopacks.
A few questions:
How are you loading ur cube?
Did the data get thru fine to PSA with the infopack in question?
How did you load ur DSO(assuming the load was successful)?
Message was edited by:
voodi -
Buffer error when loading from EAS??
All,
We're on essbase 7.1.2 and having trouble loading an ASO cube thru eas. We keep getting error 1270040: Data load buffer [2] does not exist.
I did some research on this and it should only happen when running thru MaxL, not in EAS. From what I read, EAS is supposed to handle this transparently.
Does anyone have any ideas why this might be happening?
Additional info: It only seems to happen when using an EAS client on a remote computer, not on the server itself.
Thanks,This is one of those error messages that does not mean what you think it means. I have had this error come up when something was wrong in my load rule, misspelled dimension or member name, missing a dimension etc. check your load rule carefully, sometimes the errors are hard to spot
-
" Error when inserting in PSA table RSTSODSPART" when loading into PSA
Hello,
Did anyone encounter something similar, and found a solution ?
BI 7.0 - EnhP 1 - SP5
When loading data from R/3 into PSA, we encounter following error message:
" Error when inserting in PSA table RSTSODSPART"
===============================================================
- the first datapackage is written successfully to PSA,
but from the second datapackage onwards the error message pops-up
" Error when inserting in PSA table RSTSODSPART"
- The original dataselection in the infopackage is somewhere stored
If the selection in the InfoPackage is reduced (e.g. only one document i.o. a period)
it stil starts loading according the original selection (the month)
- If we create a new InfoPackage and select very few data (only one datapackage)
then we can load to PSA succesfully, but when we load to DSO we can't activate the DSO.
- We remarked that:
Two versions of the PSA exist for that datasource 0FI_GL_40:
a Table(/BIC/B0000555000) in version 1 exists,
a Table(/BIC/B0000555001) in version 2 exists
Thanks in advance,
Best regardsHello All,
We had a problem similar to what Ilse Depoortere describes. The problem happens in our BW QA system a few days/weeks after it has been copied from Production. Data loads start failing with these two error messages:
RSM2 851 - Error when writing in PSA (Caller 32)
RSAR 130 - Error 7 when adding to PSA (Caller 70)
We have just implemented the fix described in note 1340371 (replaced the LIB_DBSL with patch level 247), and the problem is gone. Failed data load process chains can be restarted and finish successfully.
This has been a really useful discussion, thanks all! And thanks to my coworker Bob who found it.
Vince Vajda -
Error while selecting date from external table
Hello all,
I am getting the follwing error while selecting data from external table. Any idea why?
SQL> CREATE TABLE SE2_EXT (SE_REF_NO VARCHAR2(255),
2 SE_CUST_ID NUMBER(38),
3 SE_TRAN_AMT_LCY FLOAT(126),
4 SE_REVERSAL_MARKER VARCHAR2(255))
5 ORGANIZATION EXTERNAL (
6 TYPE ORACLE_LOADER
7 DEFAULT DIRECTORY ext_tables
8 ACCESS PARAMETERS (
9 RECORDS DELIMITED BY NEWLINE
10 FIELDS TERMINATED BY ','
11 MISSING FIELD VALUES ARE NULL
12 (
13 country_code CHAR(5),
14 country_name CHAR(50),
15 country_language CHAR(50)
16 )
17 )
18 LOCATION ('SE2.csv')
19 )
20 PARALLEL 5
21 REJECT LIMIT UNLIMITED;
Table created.
SQL> select * from se2_ext;
SQL> select count(*) from se2_ext;
select count(*) from se2_ext
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04043: table column not found in external source: SE_REF_NO
ORA-06512: at "SYS.ORACLE_LOADER", line 19It would appear that you external table definition and the external data file data do not match up. Post a few input records so someone can duplicate the problem and determine the fix.
HTH -- Mark D Powell -- -
ORA-00054 error when loading Oracle table using Data Services
Hello,
we are facing ORA-00054 error when loading Oracle table using BO Data services
(Oracle 10g database, BODS Xi 3.2 SP3)
Test Job performs
1- truncate table
2- load table (tested in standard and bulk load modes)
Scenario when issue happens is:
1- Run loading Job
2- Job end in error for any Oracle data base error
3- When re-running the same Job, Job fails with following error
ORA-00054: resource busy and acquire with NOWAIT specified
It seems after first failure, Oracle session for loading the table stays active and locks the table.
To be able to rerun the Job, we are forced need to kill Oracle session manually to be able to run the Job again.
Expected behaviour would be : on error rollback modifications made on table and BODS stops Oracle session in a clean way.
Can somebody tell me / or point me to any BODS best practice about Oracle error handling to prevent such case?
Thanks in advance
Paul-Mariethe ora-0054 can occure depending how the job failed before. If this occures you will need the DBA to release the lock on the table in question
Or
AL_Engine.exe on The server it creates the Lock. Need to Kill Them. Or stop it..
This Problem Occurs when we select The Bulkloading Option in orclae We also faced the same issue,Our admin has Killed the session. Then everything alright. -
Hi ,
How to load data from external table to transaction table using SQLLDR ?You use an external table to load the data it is described in the link to the manual I provided.
Here is an example.
Re: Using DML order to import a .xls file
You would not be using SQLLDR though as external tables replace that functionality. -
Chinese characters scrambled when loading from DS to BW
Hi, I've been pulling my hair out with this issue.
I have a flat file containing Chinese text. When I load this in BW using 'FLATFILE' as a source system, it works fine. BW shows the correct Chinese characters.
When I do the same load using BODI, I get funny characters.
When I use BODI to load from one flat file into another flat file, the Chinese characters remain correct.
What do I need to do to make sure I get the right Chinese characters in BW when loading from BODI?
BODI is installed on Unix on Oracle 10.
I run the jobs as batch processes.
The dsconfig.txt has got:
AL_Engine=<default>_<default>.<default>
There are no locale settings in al_env.sh
BW target is UTF-8 codepage.
File codepage is BIG5-HKSCS
BODI is set up as a Unicode system in SAP BW.
When loading flat file to flat file, I get a message:
DATAFLOW: The specified locale <eng_gb.iso-8859-1> has been coerced to <Unicode (UTF-16)
because the datastore <TWIN_FF_CUSTOMER_LOCAL> obtains data in <BIG5-HKSCS> codepage.
JOB: Initializing transcoder for datastore <TWIN_FF_CUSTOMER_LOCAL> to transcode between
engine codepage<Unicode (UTF-16)> and datastore codepage <BIG5-HKSCS>
When loading to BW the messages are almost the same, but now the last step in UTF-16 to UTF-8.
I read the wiki post which definitely helped me to understand the rationale behind code page, but now I ran out of ideas what else to check ( http://wiki.sdn.sap.com/wiki/display/BOBJ/Multiple+Codepages )
Any help would be greatly appreciated.
Jan.Hi all. Thanks for the Inputs. This is what I got when I clicked on the Details Tab of the Monitor....
Error when transferring data; communication error when analyzing
Diagnosis
Data packages or InfoPackages are missing in BI but there were no apparent processing errors in the source system. It is therefore probable that there was an error in the data transfer.
The analysis tried to read the ALE outbox of the source system. This lead to error .
It is possible that there is no connection to the source system.
Procedure
Check the TRFC overview in the source system.
Check the connection to the source system for errors and check the authorizations and profiles of the remote user in both the BI and source systems.
Check th ALE outbox of the source system for IDocs that have not been updated. -
Lightroom encountered and error when reading from it preview cache and needs to quit
A power outage caused my Lightroom 5.2 to shut down without closing. When I powered back up and opened lightroom it gives me an error "Lightroom encountered and error when reading from it preview cache and needs to quit" and then it says it will try to fix it the next time it opens. I have opened it 20 times and it is not fixing it. I removed the program completely and upgraded to 5.5 AND it is still giving me the same error. Is my catalog corrupt or something? I had it set to automatically load the most currently used catalog, so it is not allowing me to open or start a new catalog either. HELP!!!
Search the forum, this has been answered many times.
-
"Lightroom encountered and error when reading from its preview cache and needs to quit"
I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains.
Any Ideas here? Is there another app that may be telling it where to look for the cache and it no longer there? I was using a ramdisk for a bit but ditched it. Not sure if that has something to do with it but it seems suspect.
Your thoughts?
--Kenny Brandon WilsonTalked to Adobe support this morning, this is their response in case anyone else is looking for help. I'm running a Windows 7 box, LR 5.6.
Gokul: Click on start and type %appdata%, then open roaming folder.
Edward: ok
Gokul: Open Adobe folder.
Gokul: Open Lightroom folder.
Gokul: Open Lightroom folder> Preferences.
Edward: ok
Gokul: Rename Lightroom 5 Preferences.agprefs file as Lightroom 5 Preferences.agprefsOLD.
Edward: OK
Gokul: Please check if you can launch Lightroom without any error.
Edward: it shows me a welcome screen and is asking me to select my country
Edward: aka, register the software
Gokul: You can skip and launch it.
Edward: LR catalog not found
Gokul: Please select the catalog.
Edward: my original catalog?
Gokul: Yes.
Edward: testing integrity of catalog
Edward: loaded just fine
Gokul: Okay.
Gokul: Please check if you can re-launch it again.
Edward: yes, it worked!
Gokul: Excellent!
Gokul: Since your preferences were corrupted you were facing issue so we renamed the preferences file to reset it.
Edward: aha....ok
All of my import/export presets were intact along with develop user presets. I'm happy as a clam for my $10/month! -
I get the following window on loading Lightroom 5.7 -
Lightroom encountered an error when reading from its preview cache and needs to quit.
Lightroom will attempt to fix this problem next time it launches.
I have tried several restarts, without success. Also reinstalled Lightroom; no joy
Any suggestions?Using your system browser (Windows Explorer or Finder), open the folder that contains your catalog. In Windows it is in your pictures folder and then in a Lightroom folder. Inside of the Lightroom folder you will find another folder that has the extension .lrdata. It will have the same name as your catalog except for the extension. You need to delete that folder, and then start Lightroom again. Lightroom will generate a new previews folder, and you should be back in business.
Maybe you are looking for
-
IPad Fails to connect to wifi, but shows the wifi icon
My company just installed a wireless network in our building. I was very excited because I can finally use my iPad in meetings and ditch the IBM laptop. However, it does not want to connect to the wireless network. Let me try to explain what happe
-
Can I transfer Time Machine Backup from WD Hard Drive to Time Capsule?
I have a Western Digital 500 Gb. Hard drive and recently purchased a 500 Gb.Time Capsule which, at the moment, am using only for the AirPort feature. I would like to use Time Capsule for my Time Machine backups and use the Western Digital drive as my
-
Ps3/Xbox connect to the macbook pro retina display
is it possible to connect a PS3/XBox to the new 2012 macbook pro with retina display?
-
Need to make report "printable" How to change report look (template?)
We are using Theme 2 and it's the only one installed (that I can see anyway) and we aren't going to be installing anything else. I can't do anything that causes a major upheaval in the application because it has 104 pages and is in production. We are
-
How do you auto-login on Yosemite?
Before downloading Yosemite, I had it to where I could turn on my Macbook pro w/ retina, and it automatically goes to my account without needing to put in a password. I am the only user, and I have the guest set to off. But I can't figure out how to