Error when modify several times a column -- CHANGED_GLOBAL_INSYNC

Hello, i have a problem.
I have sync in background, i´m modifying a column several times, the first modify work fine, the second work fine too, but sometimes, appear problems from the third time. Why?
The error in console is:
"Creation on Field cZSBOE002_TOP_STATUS with value N is not allowed because SyncBo of Row 0001014016 is CHANGED_GLOBAL_INSYNC and CreateInputQualifyType is FORBIDDEN"
The syncKey is good.
What could be the cause? How can solve it?
Thanks,

Hi Victor,m
the error message is the answer to your question:
0001014016 is CHANGED_GLOBAL_INSYNC
Check the status of the BO - there you will see that you have three main stats:
Global
Local
Insync
Problem in your case - and I always told you to be carefull with auto sync:
You change an item - if you change iot again before the sync - or after a complete sync when the answer for that item comes back from the backend - then all is fine. Just wait one more sync circle and change the item then - all is fine.
Now the solution:
ok, you create an item - item is in LOCAL. As long as it is on Local you can change it again and again. As often as you like.
Not the sync starts. The item goes into INSYNC state. This means, any change is forbidden - this is to avoid any inconsistency between backend and client - cause the backend wants to send its answer back to the client. Wait for that answer - usually with the next sync this comes down to the client
Then the item goes to GLOBAL - and now you can change it again - until the next sync puts the changed item back into state INSYNC - see above.
Well, that is all - check the status of the BO and change it only while it is GLOBAL or LOCAL.
Hope that helps.
Regards,
Oliver

Similar Messages

Problems publishing a web-access on Sharepoint: Error when modifying list schemes

Good afternoon.
I have an application built with an access database with several forms and web macros which is published on Sharepoint 2010. Through this application - not too big not too complex (ca. 10 tables / less than 2000 records at most) - I receive updates
that are loaded into external applications, mainly excel worksheets, ms project files and so on.
I have been going through the cycle of developing and publishing new versions of the application on the same site for more than a year; suddenly, from severeal weeks ago on, I started receiving the following error affecting random tables (not always the
same) which crashes the compilation and publishing:
"Error when modifying lists schemes. Changing name to "ID" field on list XXXX failed"
And each time the list is different. And of course I am no trying at all to change the name of any ID field !????
Any clue of what might be happening?
Thank you

The article might have missed the step where the blogger might have missed the step. Read the following article and which confirms that you cannot use user controls in SB solutions.
http://msdn.microsoft.com/en-us/library/gg615454.aspx
If you are trying to build this in SharePoint 2013 then you must know that custom code is deprecated from SB solutions.
Deprecation
of Custom Code in Sandboxed Solutions
For SP 2013 your best bet is to create an APP or create a farm solution (God please forgive me). :)
Amit

11i Error when modifying account

eBus 11.5.10.2, DB 10.2.0.4, OID 10.1.4.0.1, RHEL4
Apps and OID on are on the same server, single instance, DB is on a seperate server.
Recently when we try to modify the account of a user we experience an error when trying to save the changes.
The pop-up error states:
Unabled to call fnd_ldap_wrapper.update_user due to the following reason:
ORA-20001: Unabled to call fnd_ldap_wrapper.update_user due to the following reason:
An unexpected error occured. Please contact System Administrator.. (USER_NAME-XXXXXXX)
I enabled logging for FND and got the following in the fnd_log_messages table:
fnd.plsql.oid.fnd_oid_plug.get_realm_dn: LDAP SESSION closing in EXCEPTION BLOCK - START
fnd.plsql.oid.fnd_oid_plug.get_realm_dn: LDAP SESSION closed in EXCEPTION BLOCK - END
fnd.plsql.oid.fnd_ldap_wrapper.update_user: ORA-06503: PL/SQL: Function returned without value
fnd.plsql.oid.fnd_ldap_wrapper.update_user: l_err_code :FND_SSO_UNEXP_ERROR, l_tmp_str :ORA-06503: PL/SQL: Function returned without value
So it seems something returns without a value, but I am not sure how to track down what. I checked and the user account is in OID. It seems to be occuring to accounts that are linked via the "Customer" field on Define as opposed to "Person"
What can I enable log wise or check to find the cause of this issue? I have searched metalink and all the documents I have found concerning Function not returning a value are for other items and not accounts.
Thanks
Edited by: Toolman21 on Sep 16, 2010 10:47 AM

Just to update the forum post, I have finally discovered the issue. The Global User ID that was in eBus did not match that in OID, therefore it was returning not found.
The solution was to update the GUID in APPS.FND_USER to match what OID contained. If the SSO link on the fly feature is used in provisioning you can simply set the USER_GUID column in APPS.FND_USER to null for that user and once they log in again it will be repopulated from OID. Alternatively you can use the script $FND_TOP/patch/115/sql/fndssouu.sql to change this for a user as well.
@$FND_TOP/patch/115/sql/fndssouu.sql USERNAME
Thanks for the help.

Error when using filter on date column in interactive report

Hi,
I'm getting the following error when using the filter on a date column. None of the criteria in the filter list work. All give me the same error but when I use the filter on a column feature (in the search bar) and use ">" and "<" those work.
Can someone please help me????
" Settledate is in the last 2 years
ORA-30175: invalid type given for an argument ORA-02063: preceding line from MAINDATA "

I have a similar problem . I have an interactive report based on resultset stored in a collection; since all the columns of a collection are of string datatype, I convert the columns to appropriate datatypes before its returned to the user; everything works as desired except when I try to filter on a data column , I get a ORA-01858: a non-numeric character was found where a numeric was expected .
I turned on debug mode and am copying the output here , column c009 which is aliased to 'C' is the one that I am trying to apply the filter on
select
ROWID as apxws_row_pk,
"C001",
"C002",
"C003",
"C004",
"C005",
"C006",
"C007",
"C008",
"CHECKOUTTIMESTAMP",
"C010",
"C011",
"TO_NUMBER(C012)",
"TO_NUMBER(C013)",
"TO_NUMBER(C014)",
"C015",
"C016",
"C017",
"TO_NUMBER(C018)",
"C",
count(*) over () as apxws_row_cnt
from (
select * from (
Select c001,c002,c003,c004,c005,c006,c007,c008,to_date(c009,'dd-MON-yy HH24.MI') checkouttimestamp,
cast(to_date(c009,'dd-MON-yy HH24.MI') as timestamp) c,
--TO_TIMESTAMP(c009,'dd-MON-yy HH24.MI') c1 ,
trunc(to_date(c009,'dd-MON-yy HH24.MI')) checkoutdate,
c010,c011,to_number(c012),to_number(c013), to_number(c014),c015,c016,c017,to_number(c018) from apex_collections where collection_name = 'IR_BOOKSALES'
) r
where ("C" between systimestamp - ((1/24) :APXWS_EXPR_1) and systimestamp)*
) r where rownum <= to_number(:APXWS_MAX_ROW_CNT)
order by ROWID
0.04: IR binding: ":APXWS_EXPR_1"="APXWS_EXPR_1" value="1"
0.04: IR binding: ":APXWS_MAX_ROW_CNT"="APXWS_MAX_ROW_CNT" value="2000"
ORA-01858: a non-numeric character was found where a numeric was expected
I have tried to convert c009 to date, timestamp and timestamp with time zone datatypes ; they all return the same error ,but all 3 datatypes work fine with systimestamp when I run them in sqlplus. Any help would be appreciated.

Error when activating Real Time Data Source

Hi..
I created a generic datasource in R/3 system via RSO2, with the Real-time check box enabled in the settings for Generic Delta. I saved the datasource. Replicated it into BW System.
I tried to activate this Real time Data Source in BW, it says "Error when activating Data Source".
I am on BI 7.0, with PI_BASIS: 2005_1_700.
Please let me know if you need any further information.
Thanks,
Sai.

Hi sai,
Can you specify from where you have created your geneic data source like by using DB tabl/view/infoset query.
am

Error when modifying VM Memory - "Invalid minimum memory amount"

Good day,
I am trying to modify a virtual machine's static memory setting using VMM 2012 R2 with UR 2. The VM is running on a Hyper-V 2012 R2 host cluster. Whether I use the VMM GUI or attempt to issue the command via VMM Command Shell, I get the same
result:
PS C:\Windows\system32> $VM= Get-SCVirtualMachine -name "SomeVM"
PS C:\Windows\system32> set-scvirtualmachine -VM $VM -MemoryMB 4096
set-scvirtualmachine : VMM cannot complete the host operation on the hyperv.domain.com server because of the error: 'SomeVM' failed to modify device 'Memory'. (Virtual machine ID22AD6F9F-E5B6-4B8D-9AB6-6A48A9521297)Invalid minimum memory amount assigned for 'SomeVM'. The minimum amount of memory you can assign to a virtual machine is '32' MB. (Virtual machine ID22AD6F9F-E5B6-4B8D-9AB6-6A48A9521297) (Error ID: 12700, Detailed Error:Unknown error (0x8005))
Resolve the host issue and then try the operation again.
To restart the job, run the following command:
PS> Restart-Job -Job (Get-VMMServer localhost | Get-Job | where { $_.ID -eq"{8301e122-b69e-4ac0-82d7-82c473d99e3a}"})
At line:1 char:1
+ set-scvirtualmachine -VM $VM -MemoryMB 4096
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ReadError: (:) [Set-SCVirtualMachine], CarmineEx ception
+ FullyQualifiedErrorId : 12700,Microsoft.SystemCenter.VirtualMachineManag er.Cmdlets.SetVMCmdlet
The error indicates that I am attempting to set the VM memory to something less than 32 MB, but as shown above I am actually trying to set it to 4096 MB. I also get this error when I attempt to modify the value using Hyper-V Manager (or in this case
the Failover Cluster Manager). Note that I am not attempting to configure dynamic memory on this VM.
One more note about this VM - it was migrated from a Hyper-V 2012 host cluster performed by exporting the VM from the old host, and importing it to the new one.
Not sure if anyone else has experienced this error or if there is a work around.

Really what the error is not telling you, is that you need to set the value for minimum memory in addition to the value you are setting.
if dynamic memory is on, you need to set them all:
http://technet.microsoft.com/en-us/library/hh801341.aspx
-MemoryMB<Int32>
Specifies, in megabytes (MB), the amount of random access memory (RAM) on the host that is allocated to a virtual machine. The default value is 512 MB. For a virtual machine on which dynamic memory is enabled (on a host running Windows Server 2008 R2 SP1
or later), use MemoryMB to specify the startup memory value.
I have run into this issue what I had VMs that I migrated to Hyper-V 2012 R2, because the minimum was actually lower. Or it was empty if the VM had fixed memory. And now it can no longer be an empty setting.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Error When Modifying a Resource Event as Designate

Hi,
I'm developing an app for a conference room device using the C APIs and am having a problem modifying an event for a resource. If I use the same user ID as with which the event was created, everything works fine. However, I'm attempting to use an ID that is set as a designate for a group of resources, and when I do, I get a CAPI_STAT_DATA_UID_NOTFOUND error when using the CSDK_FLAG_STORE_MODIFY flag.
Here's the data I'm sending:
VERSION:2.0
PRODID://Oracle//CAPI//EN
BEGIN:VEVENT
UID:20070111T141735Z-101b6d4-65-3559-Oracle
X-ORACLE-EVENTTYPE:APPOINTMENT
DTSTART:20070111T092000
DTEND:20070111T095000
END:VEVENT
END:VCALENDAR
Flags CSDK_FLAG_STORE_MODIFY | CSDK_FLAG_STREAM_NOT_MIME
The SDk version is 10.1.2.0.0
Is there any inherent problems with this approach?
Thanks,
Dave Bowman

Here's some additional information on the problem and the sequence of events:
1) Open the connection using user ID that is a designate for the resource.
2) Change the user ID to the resource identifier ("?/RS=RENCI - Europa
Conference 520/") using CSDK_SetIdentity with the flags set to CSDK_FLAG_NONE.
The function call appears to work correctly and returns no errors.
3) Modify the event data using CSDK_StoreEvents with the the above data.
4) The error returned is: CAPI_STAT_DATA_UID_NOTFOUND. And the event ID is
correct.
I've tried both with and without using the CSDK_SetIdentity function, with the
same results.
Is it feasible to use this approach to have a resource be able to modify an
event that was created by another user? Or is the use of another ID with
higher privileges required? Such as 'SYSOP'? If the latter, obtaining SYSOP
privileges may be problematic as we are just users of the Calendar system and
not the owners.
Thx.......

Portal Runtime error when modifying: com.sap.portal.runtime.logon.par

Hello,
We need some help because we get 'Portal Runtime error: iView: N/A Component Name:N/A' error when trying to access portal logon screen.
This is what we've done:
We've modified com.sap.portal.runtime.logon.par file and we've uploaded it but it doesn't work. Because of the error, we've overwritten this file with the original one but now it's imposible to access portal.
The situation it seems to be like before the modification of the .par file but we get the same error and can't access portal.
Please, do you know what could be the problem?
Thanks in advance

Hi Belen,
Here are the steps you would need to take
1. import the original par file into the NWDS and name the project as
    com.sap.portal.runtime.logon
2. Make sure the project name is com.sap.portal.runtime.logon
3. use winzip/winrar to extract the com.sap.portal.runtime.logon.par file in
    a local directory
4.Under the lib you would find two jar files copy them and paste them in your project
   under dist>PORTAL-INF>lib directory
5.move the files cert....till umResetPass....jsp into the PORTAL-INF directory
6. export the par to the server in question
7. restart your server
This should solve your problem..
Thanks,
Gokul

JNDI error when modifying schema

While modifying some objectclasses on IPlanet LDAP using JNDI I get the following error:
[ERROR] [LDAP: error code 1 - The objectclass is malformed. Missing opening "(" around allowed attributes]
Note that this happens on certain object classes and not in others but I can not determine a pattern. I also get the same error when removing certain objectclasses (it works ok with others).
I'm using the code given as an example in the Java tutorial to modify the schema.
Any input would be apreciated.
Regards.
-- Paul

Pls pass either of following two properties to the environment parameter of InitialDirContext:
New property name: com.sun.jndi.ldap.netscape.schemaBugs=true
Old property name: com.sun.naming.netscape.schemaBugs=true
They are used by Sun's JNDI LDAP driver to work with Netscape LDAP server.

Error when modifying tabular form

Hi
In Apex 3, I created a tabular form based on the query below:
select user_id /* PK */, name, dob
from users
It works perfectly well; I am able to update the name and dob fields.
Then I changed the query to:
select user_id /* PK */, name, null dob
from users
...(i.e. not interested in the dob column anymore but want to keep the report column) and cleared the properties reference table owner/name/column name of the dob report column.
However, when I try to update the name of a user, I get the error:
Error in mru internal routine: ORA-20001: Error in MRU: row= 1,
ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process.
current checksum = "7C3CD9C5DA0B5AF45AE616959020A0AA",
item checksum = "6910D5C7015D84773A9E8F65299991F6".,
update "SCHEMA"."USERS" set "USER_ID" = :b1, "NAME" = :b2, "DOB" = :b3Why is dob still being included in the update statement?
Did I miss something?
Thanks,
Luis

Since the DOB was one of the columns specified when you created the tabular form, the internal PL/SQL process that it uses for making updates is still trying to update that column. As you have now modified the underlying query for the form and are passing a NULL for your DOB, you will find that any update made using this form would set the DOB to NULL, so beware!
Unfortunately, once you have created a tabular form, you cannot make changes to the process that it uses for manipulating data. Another drawback of the tabular form is that it uses the primary key of the table as a way of knowing which record it is updating when it processes the changes. As a result, you cannot modify the primary key value itself - and that is why you are getting the error.
Generally speaking it is not a good idea to edit primary key values. If this piece of information does require editing, I would suggest you find another candidate for the primary key - perhaps a standard sequence-populated column that could act as a surrogate key?
Cheers,
Colin

Error when Modifying Application

Hey Experts!
We've recently upgraded to BPC 7.0 - Microsoft 2008 DB. When I tried to modify one of our Applications for the first time, I get the following message:
Error message:: Access to the path "F:\BPC\Data\Webfolders\AdminTemplates\AuditRpt.rdl" is denied.
This occurs on Step 8 of the Modify Application Process.
I've ensured that the User ID I'm running this process under is a BPC administrator and has full Local Admin rights on the server. Any idea why this is occuring?
Thanks!
Sean

Hi Sean,
Do you have access to the application server? If not, please check with your DBA who created the ID for you.
My take is that your ID somehow doesnt have sufficient privileges because when you modify application through BPC, you are essentially modifying the folder on the application server.
Also, does your application has data? Try running the 'Clear' package to delete data from your application, then modify the application. See if it works!
Tagz

Deployment error when modifying measures and my heirarchy

I am working on Lesson 3 on analysis services tutorial where i am modifying measures and my heirarchy
and this is my error message.
Warning 1 Dimension [Date] : Avoid visible attribute hierarchies for attributes used as levels in user-defined hierarchies. 0 0
Warning 2 Dimension [Customer] : Avoid visible attribute hierarchies for attributes used as levels in user-defined hierarchies. 0 0
Warning 3 Dimension [Product] : Avoid visible attribute hierarchies for attributes used as levels in user-defined hierarchies. 0 0
Warning 4 Dimension [Product] : Define attribute relationships as 'Rigid' where appropriate. 0 0
Warning 5 Errors in the OLAP storage engine: A duplicate attribute key has been found when processing: Table: 'dbo_DimDate', Column: 'CalendarQuarter', Value: '4'. The attribute is 'Calendar Quarter'. 0 0
Error 6 Internal error: The operation terminated unsuccessfully. 0 0
Error 7 Server: The current operation was cancelled because another operation in the transaction failed. 0 0
What can i do to fix this?

Hi Cook959,
In your scenario, it seems that the issue was related to the error message.
Errors in the OLAP storage engine: A duplicate attribute key has been found when processing: Table: 'dbo_DimDate', Column: 'CalendarQuarter', Value: '4'. The attribute is 'Calendar Quarter'. 0 0
There are many reasons that can cause this issue, here are some blogs which list the reasons and explanation, please refer to the links below to see the details.
http://ms-olap.blogspot.com/2009/11/duplicate-attribute-key-has-been-found.html
http://blog.oraylis.de/2013/08/a-duplicate-attribute-key-has-been-found-during-processing-revisited/
Hope this helps.
Regards,
Charlie Liao
TechNet Community Support

Error when changing database time zone

Hi all,
I have Oracle 9.2.0.1.0 on Windows 2000 Pro. I try to change the time zone of the database using
ALTER DATABASE SET TIME_ZONE = '+01:00'
but it fails with error ORA-02231.
Am I missing something?

This is an expected behaviour, it's just that the message text was not meaningful.
Basically if there is a TSLTZ column in the database, user is not allowed to change the database time zone. This is because it will invalid their existing TSLTZ data.
You should either perform ALTER DATABASE SET TIME ZONE before creating any tables with TSLTZ columns, or drop the TSLTZ columns first before doing the ALTER DB statement.
According to Bug 2435266, the error message has now been changed to
ORA-30079: cannot alter database timezone when database has TIMESTAMP WITH LOCAL TIME ZONE columns

500 Internal Server Error after deploying several times

Hello everyone. I originally had an issue with SOA not running as a service due to some issue with Windows Server 2003 and custom installation. I'm not entirely sure that problem is fixed, but unsure if it could be related to this issue.
The problem I'm having is if I redeploy an application a few times, I get the following error:
*500 Internal Server Error*
Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details
after I go to the application. This machine currently has 8gb of memory and I do know I am still using the default memory setting. When I tried to change it, all of the applications stopped functioning.
Does anyone have any suggestions? I'm curious if uninstalling SOA and then using the basic installation will fix most of my problems.

I forgot to mention that I had to manually create the service as well which I don't think is still working quite right. The application server will run, but it's not accessible by anyone. Only once I manually start the SOA Server does it work properly, until it hangs up of course.
I'll check metalink to see if there has been any updates to the Windows 2003 problem.

Error when modifying global services plan

I'm trying to modify the global services part of my wireless plan. When I try submitting this change, I get the error message "You currently are on the selected plan. Please select another plan." Is this a bug with the site or is there some other way to change just the global services part of my plan?

I can help you with that, c_b1. Which plan do you currently have? Which plan are you attempting to change to?
ChaunceyM_VZW
Follow us on twitter @VZWSupport

Error when modify several times a column -- CHANGED_GLOBAL_INSYNC

Similar Messages

Maybe you are looking for