Error when opening large data forms

Hi,
We are working on a Workforce planning implementation. We have 2 large custom defined dimensions.
When opening large data forms we get a standard "Error has occurred" error. If we reduce the member selection the data form opens fine.
Is anyone aware of a setting that can be increased to open large data forms? Im not referring to the "Warn id data form is larger than 3000 cells" setting.
Im pretty sure there is a parameter that can be increased but I cant find it.
Thanks for your help.
Seb

Hi Seb,
If you do find the magic parameter then let us know because I would be interested to know.
It is probably something like ALLOW_LARGE_FORMS = true :)
In the planning logs is the error related to planning or is essbase related error.
Is it failing due to the amount of rows or is it because it is going beyond the max of 256 columns ?
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Error when saving large XML Forms - XFBuilder

When creating large XML Forms (many entry fields, many links when metadata properties), the xfbuilder aborts the operation with an error message stating a networkcommunication failure / server response time-out. When some fields are deleted, the saving takes some time, but will prevail...
Does anybody have experienced these problems as well and is there a solution so that larger xmlforms can be created?? Currently the xmlforms producing errors have over 100 entry fields.
Rgds Caspar

OK, I found it: when editing the Project Options, the server time out can be set. In NW04 edition this is set default to 120; in EP60 SP2 this value is empty. Increasing the value (e.g. 180) does the trick!

Error when open Resouse Viewer form NEBC

Hi experts,
I facing a error when opening Resouse Viewer from NWBC.
Could you kindy provide some ideas or suggestiongs, Thanks in advance.
Best Regards,
Matthew He

Hello,
the SAP Visual Business frontend component requires the FPM application to run in a browser mode 'standard'. You can press F12 in your browser to adjust this.
Check note 1987004 to adjust the default mode for the application.
In addition, it is important to check the SAP VB installation guide for the right NWBC and browser version.
Hope this helps,
Marcus

Error on page when opening Web data forms

Hi!
Whichever web form I open in my application, I get the message "Error on page" in the bottom left and I cannot see the business rules attached to the form. This issue appeared just a few minutes ago and it was ok earlier. I will be very grateful for any advice!

Hello, John! Yes the services were restarted and it did not work on the other client machines. However I have managed to resolve the issue.
What I found interesting is that the error message on another client machine using IE 8 gave more details on the error than the machines using IE 7. So the error message on the machine with IE8 contained a word combination "Validate Data" in its text. So I went to the planning server and substituted ValidateData.js that had some of our custom code with an empty default ValidateData.js and the issue got resolved.
However I cannot state that the issue is resolved well because we still would like to have ValidateData.js with our code on the server! :(

Why does the Summary function give a datatype error when opening a data model for editing?

I have two datasets (G1 and G2) within a data model; i've used a field in G2 and placed it into G1 as a Summary Function of G2. The datatype of this field in G2 is Integer, however if you set the Summary field in G1 to the same datatype - Integer, an error appears.

Oracle have provided a patch.
We are running OBIEE at patchset 11.1.1.7.140715, Oracle have provided us with a patch p17563277 backported to the 140715 patchset.
This fix will presumably be incorporated in later releases.

Error when opening Data Form

Hi All,
Also I have tried by removing access for that user and opened the Dta Form but still it throwing me the same error:
You are trying to open the data form, but cannot because all of the required dimensions are not present. Possible causes may be that you do not have access to at least one member of a required dimension, or the member selection resulted in no members present. Contact your administrator
Kindly guide me.
Thanks and Regards
ChiDam

duplicate post - Error while opening Data form
Cheers
John
http://john-goodwin.blogspot.com/

Error When Opening Any Form

Hi All.,
Im facing some issue while opening any form..its stuck in below mention file while opening any form i tried all the ways still im not able to fix the issue.
Application:11.5.10.2
OS-----------HP-UX
DB-----------10.2.0.4.0
File Name:
oracle/forms/ui/FLWTextArea
Work Around
Relink the all the files
Regenerated the jar files
Regenerated the forms
f60gen help=y
Forms 6.0 (Form Compiler) Version 6.0.8.28.0 (Production)
Forms 6.0 (Form Compiler): Release - Production
(c) Copyright 1999 Oracle Corporation. All rights reserved.
PL/SQL Version 8.0.6.3.0 (Production)
Oracle Procedure Builder V6.0.8.21.0 Build #0 - Production
Oracle Virtual Graphics System Version 6.0.5.39.0 (Production)
Oracle Multimedia Version 6.0.8.25.0 (Production)
Oracle Tools Integration Version 6.0.8.17.0 (Production)
Oracle Tools Common Area Version 6.0.5.32.0
Oracle CORE Version 4.0.6.0.0 - Production
Metalink Doc id
java.lang.NoClassDefFoundError: oracle/forms/ui/FLWTextArea Error When Opening Any Form [ID 1219663.1]

Thanks,
From the below doc id we are currently in patch set 19 but im not able see that in ad_bugs.,
Note: 232313.1 - Information on Previous Versions of Developer 6i Patchsets
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=232313.1
Here is an example:
If you have Forms: 6.0.8.27.x --> You are on Developer 6i Patch 18
If you have Forms: 6.0.8.26.x --> You are on Developer 6i Patch 17
If you have Forms: 6.0.8.25.x --> You are on Developer 6i Patch 16
If you have Forms: 6.0.8.24.x --> You are on Developer 6i Patch 15
SQL> select bug_number from ad_bugs where bug_number='&BUG_NUMBER';
Enter value for bug_number: 9935935
old 1: select bug_number from ad_bugs where bug_number='&BUG_NUMBER'
new 1: select bug_number from ad_bugs where bug_number='9935935'
no rows selected
SQL>

WORKLOAD ANALYSIS (INTROSCOPE DATA) - Error when opening an RFC connection

Hi all SDNers,
Help is needed on error "WORKLOAD ANALYSIS (INTROSCOPE DATA) - Error when opening an RFC connection".
This error occured on RCA -> Extractor FWK administration and go to managed system (PI) and from the log, i can see some extraction failed due to error message " Error when opening an RFC connection"
consequently, JAVA performance data is not appearing in RCA -> workload analysis but work fine for ABAP and adapter engine.
I've followed below notes and perform the troubleshooting step by step by still to no avail:
Note 1332428 - Missing data in service sessions from BI/CCDB
Note 1257308 - FAQ: Using EarlyWatch Alert
Note 1274287 - End-to-End Diagnostics 7.0 EHP1 SP18 to SP27
Note 1265070 - Diagnostics - Setup of Managed Systems
Note 1010428 - End-to-End Diagnostics
http://wiki.sdn.sap.com/wiki/display/SMSETUP/WorkloadAnalysis-Noapplicabledatafound
steps that have performed:
restarted agent
enlarge RFC resource cap for solmandiag and none
delete entire SID in SMSY and pull again from SLD, re-setup managed system
restart PI system
i've spent 2 days on troubleshooting this issue but lack of information in SMP and SDN, even in google.
in table E2E_EFWK_STATUS and extractor E2E_JAVA_EXTRACTOR_IF, i see all WLI_ID ended with RC 96, MESSAGE = Error when opening an RFC connection and LASTRECORDS = 0
I strongly believe this is the issue that causing no applicable data found for JAVA data.
fyi, we are on SOLMAN EHP1 SPS27.
Any kind advise is most welcome.
Thanks,
Nicholas Chang

Gosh! at last i found the solution!!
I appreciate those who tried to help and i''m sharing the solution as i believe this is the purpose of SDN Forum and help others Netweaver Chap who facing the same problem:
Problem faced:
Extractor failed intermittently for WORKLOAD ANALYSIS (Introscope Data) due to error message "Error when opening an RFC connection"
Due to the above error, performance data is not available in RCA workload analysis for J2EE engine.
Possible Solution:
1) Ensure both webadmin & SOLMANDIAG RFC working fine -> SM59 -> TCP/IP
2) go to SE16 -> E2E_RESOURCES and change the resourcecap to 10 for SOLMANDIAG
3) go to /smd/services -> Diagnostic System -> Advanced Setup -> Abap connectivity -> Connection Configuration and change server count to 10
4) Restart webadmin (step 3 & 4 can perform in VA too)
5) set gw/keepalive & gw/reg_keepalive to value 0 in RZ11 (without reboot of instance)
5) again go to SM59 -> TCP/IP -> SOLMANDIAG and put in the gateway host and gateway service correctly, don't leave this empty!!!! -
> This is the main solution to solve intermittent failed RFC for extractor.
Now, go back and monitor the extractor log and you should see no RFC error anymore and wait for 1 hour for the data to populate.
Thanks!
Nicholas Chang,

Adobe Forms Error Message 'Error when transforming object data'

Hi,
When i tried to save(Adobe Forms) after making changes in Layout its giving an error message 'Error when transforming object data' and takes me out of the transaction. How do i solve this ? Can anyone help me out.
Thanks and Regards,
Franklin.

hi
I have the same problem , plz help me out
thanks

Urgent: Problem opening a data form that uses a smart list

Hi, we've got a problem with a data form that is quite unusual.
The data form was working perfectly until yesterday when we put a smart list in it. The smart list is composed of 8 possible choices activated by the following member formula:
IF (SML==1)
((BDG->BegBalance->&CurrYear)/12);
ELSEIF (SML==2)
((INC_BDG->BegBalance)*("01A2"->ACT_FINAL));
ELSEIF (SML==3)
ACT_FINAL->&PreYear;
ELSEIF (SML==4)
(INC_ACT->&PreYear)*("01A2"->ACT_FINAL);
ELSEIF (SML==5)
ACT_FINAL;
ELSEIF (SML==7)
(INP_PER)*("01A2"->ACT_FINAL);
ELSEIF (SML==8)
INP_ASS;
endif;
Initially we tested the functioning of every different choice in the smart list and it was working properly. After a while we tried again to change the choices combination and we couldn't open the data form due to an error.
It is quite strange because sometimes it work and sometimes it doesn't. In the data form (that is very large) there are many accounts and scenarios that are dynamic calc, in addition to the smart list formula; we tried to open the form two minutes ago converting the data storage type of a scenario from "Dynamic calc" into "Dynamic calc and Store", and it seems to work at the moment... does planning have a memory limit? Can someone suggest a solution (or help us find out the reason)?
Bye

Anton,
new thread is one possibility, but the messsage box is not win message box, but SAP form, so I think you can clcik there without new thread too.
Check this thread, hope it helps
Re: Confirmation Dialog in my way

Error When Opening the Setup/Transactions/ Sources Window

Hi All,
in Oracle E-Business Suite R12 Version
Error When Opening the Setup/Transactions/ Sources Window
APP-FND-01388: Cannot read value for profile option FND_DEVELOPER_MODE in routine &ROUTINE.
ORA-01403: no data found
FRM-40735: WHEN-CREATE-RECORD trigger raised unhandled exception ORA-06502.

Amr,
Please see the suggested solutions in these docs.
App-Fnd-01388: Cannot Read Value For Profile Option Fnd_developer_mode In Routine [ID 563884.1]
R12: How To Avoid The Error Message APP-FND-01388 On Drilldown [ID 556668.1]
R12 APXINWKB Error APP-FND-01388 When Trying To Query Invoice [ID 864195.1]
APP-FND-01388 Cannot Read Profile Option FND_DEVELOPER_MODE In Benefits Service Center Form [ID 422182.1]
Thanks,
Hussein

Error when opening document with ECL control: INVALID_DATA

Hi Gurus,
I've tried to search the net for this problem but could not find anything and I'm stuck now.
Description:
we're using ECL to view attached documents (to POs etc.) which are stored through ArchiveLink on the content repository.
when we try to open this document, time-to-time we get following error:
Error when opening document with ECL control: INVALID_DATA
Message no. SDV004
by time-to-time I mean that when we try to open same attachment again it opens successfully (sometimes we need to re-open it 3-4 times to get it)
what we've tried is to enlarge timeout for HTTP protocol (tx SMICM, from former 30 to actual 60) but only effect we got is that we're waiting for the error longer time
It will be really great if anybody of you guys can give me an advice where the problem can be or where should I look and what to check
Thanks,
David

Hi Christoph,
thanks for tip, unfortunately this was already flagged, currently settings are:
for Display Settings:
yes - include ECL control
use HTML control
empty - maximum viewer wait time
(do you think that setting some value for this could help)
yes - deactivate generic object services in viewer
no - doc display as dialog box
yes - deactivate data provider cache
Storage Settings:
yes - always copy document class from document type
yes - permit multiple assignment
Thanks,
David

Error when transforming object data HELP !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Hi
I am running on NW04s. Working on WD for ABAP Interactive forms. whenever I open the Adobe editor thru SFP or Se80, the editor opens up and I am able to do my operations. The moement I hit back button/Save or any other action which involves coming out of the adobe editor, it throws me an Fatal error - <b>Error when transforming object data</b>. I find that in most of the threads there are similar issues which are still open. Any Help would be appreciated.
I have installed ADLC 7.1, xACF04s.
Murali.

I did the same installation on another PC, and to my suprise it works fine. Looks very strange

Error when Fetching CATs Data to BI

Hi,
I have created data source in R/3 System (Source System) for CATS data and extracting data Using function Module. Using transaction RSA3 it is fetching all the desired records in R/3 System.
In BI System extracting Full Data and when monitoring it is throwing Error.
Error 7 when sending an IDoc
Error when opening an RFC connection    2
Error when opening an RFC connection
Errors in source system
Function Module for fetching CATS Data
FUNCTION ZLBTIME_GET_CATSREC.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*"     VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*"     VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*"     VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*"      I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*"      E_T_DATA STRUCTURE ZLSCATS OPTIONAL
*" EXCEPTIONS
*"      NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
* Example: DataSource for table SFLIGHT
* TABLES: SFLIGHT.
* Auxiliary Selection criteria structure
DATA: L_S_SELECT TYPE SRSC_S_SELECT.
* Maximum number of lines for DB table
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
* counter
          S_COUNTER_DATAPAKID LIKE SY-TABIX,
* cursor
          S_CURSOR TYPE CURSOR.
* Select ranges
** RANGES: L_R_CARRID FOR SFLIGHT-CARRID,
**          L_R_CONNID FOR SFLIGHT-CONNID.
* Initialization mode (first call by SAPI) or data transfer mode
* (following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
* Initialization: check input parameters
*                 buffer input parameters
*                 prepare data selection
* Check DataSource validity
    CASE I_DSOURCE.
      WHEN 'ZLTIME_DS_3'.
      WHEN OTHERS.
        IF 1 = 2. MESSAGE E009(R3). ENDIF.
* this is a typical log call. Please write every error message like this
        LOG_WRITE 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                  I_DSOURCE   "message variable 1
                  ' '.                 "message variable 2
        RAISE ERROR_PASSED_TO_MESS_HANDLER.
    ENDCASE.
    APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
* Fill parameter buffer for data extraction calls
    S_S_IF-REQUNR    = I_REQUNR.
    S_S_IF-DSOURCE = I_DSOURCE.
    S_S_IF-MAXSIZE   = I_MAXSIZE.
* Fill field list table for an optimized select statement
* (in case that there is no 1:1 relation between InfoSource fields
* and database table fields this may be far from beeing trivial)
    APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE.                 "Initialization mode or data extraction ?
* Data transfer: First Call      OPEN CURSOR + FETCH
*                Following Calls FETCH only
* First data package -> OPEN CURSOR
    IF S_COUNTER_DATAPAKID = 0.
* Fill range tables BW will only pass down simple selection criteria
* of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
**      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CARRID'.
**        MOVE-CORRESPONDING L_S_SELECT TO L_R_CARRID.
**        APPEND L_R_CARRID.
**      ENDLOOP.
**      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CONNID'.
**        MOVE-CORRESPONDING L_S_SELECT TO L_R_CONNID.
**        APPEND L_R_CONNID.
**      ENDLOOP.
* Determine number of database records to be read per FETCH statement
* from input parameter I_MAXSIZE. If there is a one to one relation
* between DataSource table lines and database entries, this is trivial.
* In other cases, it may be impossible and some estimated value has to
* be determined.
**      OPEN CURSOR WITH HOLD S_CURSOR FOR
**      SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
**                               WHERE CARRID IN L_R_CARRID AND
**                                     CONNID IN L_R_CONNID.
        OPEN CURSOR WITH HOLD s_cursor FOR
*        SELECT * FROM zlvctmbw.
        SELECT a~counter a~pernr a~workdate a~skostl a~lstar a~rproj a~awart a~kokrs a~meinh a~tcurr a~price
               a~unit a~bukrs a~ersda a~erstm a~ernam a~laeda a~laetm a~status a~refcounter a~reason a~belnr
               a~catshours a~act1 a~act2 a~task a~lang1 a~narr1 a~lang2 a~narr2 a~cmnt a~clst a~plchl
               b~ltxa1 b~transfer b~hrkostl b~hrlstar b~hrcostasg b~statkeyfig b~catsquantity b~bemot
               c~pspnr c~pspid
               d~kunnr
        FROM   catsdb AS a
        LEFT OUTER JOIN catsco AS b ON a~counter = b~counter
        JOIN   prps AS p ON p~pspnr = a~rproj
        JOIN   proj AS c ON c~pspnr = p~psphi
        JOIN   zltproj AS d ON d~pspnr = c~pspnr.
    ENDIF.                             "First data package ?
* Fetch records into interface table.
*   named E_T_'Name of extract structure'.
    FETCH NEXT CURSOR S_CURSOR
               APPENDING CORRESPONDING FIELDS
               OF TABLE E_T_DATA
               PACKAGE SIZE S_S_IF-MAXSIZE.
    IF SY-SUBRC <> 0.
      CLOSE CURSOR S_CURSOR.
      RAISE NO_MORE_DATA.
    ENDIF.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.              "Initialization mode or data extraction ?
ENDFUNCTION.
When fetching data using VIEW in source system it works fine.
When testing for fetching data of SFLIGHT using function module ZRSAX_BIW_GET_DATA_SIMPLE
made a copy of RSAX_BIW_GET_DATA_SIMPLE, it is working fine.
Pls suggest the cause of error.
Regards
Vishal

Hello Praveen,
Connection is fine as I tried fetching data of SFLIGHT using standard template function module which works fine and in transaction sm58 I do not any data.
Regards
Vishal

5200: Error executing query: The data form grid is invalid.

Hi,
I am getting this error " 5200: Error executing query: The data form grid is invalid. Verify that all members selected are in Essbase. Check log for details.
com.hyperion.planning.HspException;hasPovDims=1;povXML=<?xml version="1.0"?><datasources><datasource name="Profit " dsid="228af2c3_129ca3dd85c_-77b1" allowEdit="1"><dim name="Period" dimIndex="1" dsName="Profit " keyDimName="Period" memberName="Apr" displayName="Period: Apr"/><dim name="Year" dimIndex="2" dsName="Profit " keyDimName="Year" memberName="FY10" displayName="Year: FY10"/><dim name="Entity" dimIndex="5" dsName="Profit " keyDimName="Entity" memberName="9999" displayName="Entity: 9999"/></datasource></datasources>"
I have checked that both the systems essbase and planning are same. nothing's different. still i cannot find the exact reason why the report is not working.
can any please help me.
btw, i am using Hyperion Planning 9.3.1
Thanks,
BIMS

Hi
You probably deleted some members from outline that are used by report
I would recommend you to open you report/grid via rep.client and try to find which elements are abcent
Regards
Alexander
Edited by: Softperson on 19/8/2010 17:38

Error when opening large data forms

Similar Messages

Maybe you are looking for