Error when opening portal page-inner desktop frame work image error
Hi,
I have installed EP-6.0.Ima getting an error when i log in to portal.
An exception occurred while processing a request for :
iView : pcd:portal_content/every_user/general/defaultDesktop/frameworkPages/frameworkpage/com.sap.portal.innerpage/com.sap.netweaver.coll.CollaborationDetailedNavigation
Component Name : null
Page could not create the iView.
See the details for the exception ID in the log file
Pls help me its urjent.
Rajesh.
Below is the default trace errr log.
61,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain### at java.
util.TimerThread.run(Timer.java:382)#
Why this i view error coming.Is this really a problem?
or some authorisation issue??
Similar Messages
-
Getting 500 Internal Server Error when opening GC page
There was no change in configuration and all of a sudden, I can not connect to GC. I did notice that OC4J for OC4J_EM is down and I can't get it to go "Alive". Can someone run opmnctl status and print the output for me?
I'm on Windows 2003/GC 10.1.0.4. Anyone has seen this problem?
Cheers,
RodneyExact error when opening page is:
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred and anything you might have done that may have caused the error. More information about this error may be available in the server error log. -
[Solved]500 Internal Server Error- when open dialog page for LOV
Hello
I have developed JSF / ADF Bc application and my form has inputselect component and everything works fine in embeded OC4J, but when i deploy the application to apps server i get below error when i launch the dialog page to select a value
500 Internal Server Error
Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.
Please help
Thanks
Message was edited by:
user570961Frank
unfortunately nothing is reported in the log file , please see the bottom of the message to see what's in the log file
this is all i see in the log and this is added to log when the page is loaded before i try to launch my dialog page and nothing else is added to the error i am getting. and in IE it just says page cannot be displayed and firefox reports the 500 Internal server error with the message i posted in original post
we have QA server and there i deployed the application from jdeveloper and it works Okay , but for production , production services team deployed the application using the EAR file i am giving to them and i am getting this error. ( I am providing them with the EAR file generated when i deploy the application to QA from jdeveloper)
I thought i try to deploy this to QA from ear file to see if i can reproduce the problem , so undeployed my application and tried to deploy using ear file in qa, but it never goes to step 2. it hangs on the screen uploading file ..... it never completes uploading and it does not fail with error either
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Short,null)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Short)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Byte,null)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Byte)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Integer,null)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Integer)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Long,null)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Long)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Float,null)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Float)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Double,null)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Double)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ValidatorRule end
WARNING: [ValidatorRule]{faces-config/validator} Merge(javax.faces.LongRange)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.DateTime,null)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end -
Error when opening legitimate documents "Insufficient data for an image"
I work for a company who has sold "downloadable resources" via PDF for years now. We created a large batch of PDF documents in 2003 with
Adobe Acrobat 6.0 paper capture, and these are all PDF 1.5 type documents. We've provided these resources for years, however just today we were notified by a user that upon downloading the file they get a message "Insufficient data for an image". These ARE NOT HACKED PDF's. and they worked fine until 9.0. I have tried 9.0 and 9.1, on multiple computers and have confirmed this issue.
Now we are stuck with hundreds of PDF's that won't open in 9.x.
I did try downloading a free demo of "PDF-TOOLS" Recovery & Analysis tool, and I open the file using that program, scan the file - TELLS ME ALL IS OK, then resave it using that program.
Only then can I open it in 9.x.
What are we to do now short of buying a $200 tool and taking perhaps several days of time to open and save hundreds of "previously working" PDF files???RollingRocker, did you ever get a solution for this? I am having the same problem. I produce a pdf using a JSF third party api called flying saucer, which actually uses itext to produce the pdf. I can attempt to produce the same exact pdf over and over and about 85% of the time the error occurs and the rest of the time the pdf opens successfully with no error. Obviously 15% of the time the reader is completely happy with this pdf, so it is not a malicious document in any way.
-
Jave Script error when opening any page.
Whenever I load a page into Firefox I get the following error message: "[javascript application] Type Error: Components Class [CID] is undefined" This has happened with the last few versions of Firefox.
This issue can be caused by an extension that isn't working properly.
Do you have any AVG extensions or toolbars installed?
*Tools > Add-ons > Extensions
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
I just upgraded to Snow Leopard and downloaded the latest version of I-tunes, 10.5.2, but everytime I open I-tunes, i get this error: Internal Error: Could not insert menu bar item.. Error code = 5603
How do I fix this? Any help would be appreciated.
Thanks.hello Mac.INXS, please [[Clear the cache - Delete temporary Internet files to fix common website issues|clear the cache]] & [[Delete cookies to remove the information websites have stored on your computer|cookies from mozilla.org]] and then try logging into AMO again.
-
Will I lose my stored tunes and what do I need to do
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(100127) -
WORKLOAD ANALYSIS (INTROSCOPE DATA) - Error when opening an RFC connection
Hi all SDNers,
Help is needed on error "WORKLOAD ANALYSIS (INTROSCOPE DATA) - Error when opening an RFC connection".
This error occured on RCA -> Extractor FWK administration and go to managed system (PI) and from the log, i can see some extraction failed due to error message " Error when opening an RFC connection"
consequently, JAVA performance data is not appearing in RCA -> workload analysis but work fine for ABAP and adapter engine.
I've followed below notes and perform the troubleshooting step by step by still to no avail:
Note 1332428 - Missing data in service sessions from BI/CCDB
Note 1257308 - FAQ: Using EarlyWatch Alert
Note 1274287 - End-to-End Diagnostics 7.0 EHP1 SP18 to SP27
Note 1265070 - Diagnostics - Setup of Managed Systems
Note 1010428 - End-to-End Diagnostics
http://wiki.sdn.sap.com/wiki/display/SMSETUP/WorkloadAnalysis-Noapplicabledatafound
steps that have performed:
restarted agent
enlarge RFC resource cap for solmandiag and none
delete entire SID in SMSY and pull again from SLD, re-setup managed system
restart PI system
i've spent 2 days on troubleshooting this issue but lack of information in SMP and SDN, even in google.
in table E2E_EFWK_STATUS and extractor E2E_JAVA_EXTRACTOR_IF, i see all WLI_ID ended with RC 96, MESSAGE = Error when opening an RFC connection and LASTRECORDS = 0
I strongly believe this is the issue that causing no applicable data found for JAVA data.
fyi, we are on SOLMAN EHP1 SPS27.
Any kind advise is most welcome.
Thanks,
Nicholas ChangGosh! at last i found the solution!!
I appreciate those who tried to help and i''m sharing the solution as i believe this is the purpose of SDN Forum and help others Netweaver Chap who facing the same problem:
Problem faced:
Extractor failed intermittently for WORKLOAD ANALYSIS (Introscope Data) due to error message "Error when opening an RFC connection"
Due to the above error, performance data is not available in RCA workload analysis for J2EE engine.
Possible Solution:
1) Ensure both webadmin & SOLMANDIAG RFC working fine -> SM59 -> TCP/IP
2) go to SE16 -> E2E_RESOURCES and change the resourcecap to 10 for SOLMANDIAG
3) go to /smd/services -> Diagnostic System -> Advanced Setup -> Abap connectivity -> Connection Configuration and change server count to 10
4) Restart webadmin (step 3 & 4 can perform in VA too)
5) set gw/keepalive & gw/reg_keepalive to value 0 in RZ11 (without reboot of instance)
5) again go to SM59 -> TCP/IP -> SOLMANDIAG and put in the gateway host and gateway service correctly, don't leave this empty!!!! -
> This is the main solution to solve intermittent failed RFC for extractor.
Now, go back and monitor the extractor log and you should see no RFC error anymore and wait for 1 hour for the data to populate.
Thanks!
Nicholas Chang, -
Error when opening RFC Connection
Hello SAPers,
I have configured PDA in my ECC6.0 --- XI (ABAP+JAVA) Which was successful.
In my Web Dyno Pro Content Administrator
I have performed the JCO Destinations test which was successful
when I go to the URL
http://server:port/webdynpro/dispatcher/sap.com/isisrsrsmenapp/MainApp
entered the store number
In the next menu
Inventory Lookup when I enter the Article number and press Go Button
It is giving me error " Error when opening RFC Connection "
Rest of them working perfectly...
Do I need to do any configuration In Visual Admin?
Could anyone advice
Thanks In Advance
HariKrishnaThanks it got solved it was an error in RFC, I have changed the RFC now it is working fine
Thanks
Hari -
There is an error when opening the safari page.
There is an error when opening webpages which contain web videos. How to fix it? Thank you
I just updated the system and reinstalled safari. The error has gone away. Thank you
-
Error when opening Count for Campaigns ZSEG_D02_Q0001.
I get the attached error when opening Count for Campaigns ZSEG_D02_Q0001 on the portal.
Please tell me what can be the reason behind this.Hi,
you write field routine for that infoobject(BPSTATE), like below.
DATA X TYPE /BI0/OIBPSTATE.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = <SOURCE_FIELDS>-BPSTATE
IMPORTING
OUTPUT = X.
RESULT = X.
I HOPE IT SHOULD WORK.
Regards,
Ranganath. -
After using iWeb 09 since it was released, I now get this error when opening the app.
Can’t open file “/Applications/iWeb.app/Contents/Resources/Themes/Cloud 9.webtheme/Spanish.lproj/Podcast.webtemplate.”
I have tried opening from and external back up hard drive and also use Time Machine to replace the iWeb on my internal hard drive.
What's next?Hi there. I think I am having a similar problem. I was looking at some files in iWeb, but I don't believe I changed this one. I changed one of the "playtime" theme files, but then I changed it back. Anyway, I did look at the Modern Frame theme files but I didn't change them because I use them for a couple of my sites, and I was afraid to change anything. Maybe I did by accident? Anyway, here is the error I received.
Can’t open file “/Applications/iWeb.app/Contents/Resources/Themes/Modern Frame.webtheme/da.lproj/About Me.webtemplate.”
I am unable to open iWeb at all. That'll teach me.
Thanks! -
i just bought this macbook and i started having trouble when opening some webpages, the status bar shows that a certain number of errors have occured when opening the page.
It happens specially in all the profiles and main pages of myspace.com, so most of the pics in the page are not loaded, nor the audio, nor videosI trashed a little program called iStumbler that was recommended on the Apple web site for security. Now my wifi is back to normal. Perhaps the settings in iStumbler were confusing things.
-
Runtime error when click some pages
Hello everyone,
I had created lots of pages in portal ,
most of them works fine, but when I click some pages,
there occured runtime error.
And these pages can be preview .
The error message as follow:
"Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
The exception was logged. Inform your system administrator..
Exception id: 04:58_07/06/06_0132_12780850
See the details for the exception ID in the log file" .
Is there anybody know the reason and the way to solve problem?
Thanks & Regards,
Jianguo ChenHave you looked at defaulttrace.trc file for the following id "Exception id: 04:58_07/06/06_0132_12780850".
You can find the LOG file at
<DRIVE:>\usr\sap\<SID>\<INSTANCE>\j2ee\cluster\server<ID>\log
Do send me the file as well along with James and I will see if I can help too.
regards,
Piyush
ps: please mark all useful answers. -
Bex Web designer. Java ccommunication error. Error when opening rfc connec
Dear All,
Whenever we open Bex web designer we get a error message box " Java communication error : Error when opening rfc connection"
This error seems to be due to incorrect BW and Portal configuragtion.
Can anybody let me how to correct the error by doing the right BW and portal configuration. I serached many documents as well as in sdn but no concrete procedure is provided. I am in need of urgent help regarding this.
Thanks in advance.
Warm regards
MazdulIn one of the notes therre was a link. I opened the link in my portal server. There was a check list where all the conditions that were not met were marked with red. I corrected most of them according to the check list. Now the error is due to SSO not configured properly.
BEX should work fine when this is done.
Warm Regards
Mazdul
Maybe you are looking for
-
Change log while converting PR to PO changes
Hi, How to Track the compliance of PR to PO Is it possible to track if requisitions are changed in the moment of conversion? i.e would like to know if there is any report which gives changes during conversion if any. Regards, Vengat
-
Different DPI in IrfanView and Photoshop for same JPEG file
Hi everyone, I am no Photoshop expert so please excuse me if I am missing something obvious. I have a JPEG file which shows Resolution=72 DPI in IrfanView (and in other applications such as ImageMagick Identify). But under Image | Image Size, Photo
-
Fails to upload song and starts back at Step 1
I just added two songs to iTunes. They are long songs (60 minutes long) and are about 150 MB each. (The iTunes Match limit per song is 200 MB.) I added them to iTunes, and when Match tried to upload them (because it couldn't find a match) it uploaded
-
Hey I am debugging a transaction PFCG (To create roles). In this when I set a breakpoint for a FM 'PRGN_RFC_CREATE_ACTIVITY_GROUP' used in this transaction , it is set successfully. But when i press 'F8', it does not stop there , needed some help on
-
Resizing photographs for use on a website
I am designing a website which will have several photographs on it. I need to resize the photographs (from the digital original)so that they do not lose clarity on the site. Basically before I import them to the site I need to make them smaller. If I